Merge tag 'dmaengine-4.13-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:

 - removal of AVR32 support in dw driver as AVR32 is gone

 - new driver for Broadcom stream buffer accelerator (SBA) RAID driver

 - add support for Faraday Technology FTDMAC020 in amba-pl08x driver

 - IOMMU support in pl330 driver

 - updates to bunch of drivers

* tag 'dmaengine-4.13-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (36 commits)
  dmaengine: qcom_hidma: correct API violation for submit
  dmaengine: zynqmp_dma: Remove max len check in zynqmp_dma_prep_memcpy
  dmaengine: tegra-apb: Really fix runtime-pm usage
  dmaengine: fsl_raid: make of_device_ids const.
  dmaengine: qcom_hidma: allow ACPI/DT parameters to be overridden
  dmaengine: fsldma: set BWC, DAHTS and SAHTS values correctly
  dmaengine: Kconfig: Simplify the help text for MXS_DMA
  dmaengine: pl330: Delete unused functions
  dmaengine: Replace WARN_TAINT_ONCE() with pr_warn_once()
  dmaengine: Kconfig: Extend the dependency for MXS_DMA
  dmaengine: mxs: Use %zu for printing a size_t variable
  dmaengine: ste_dma40: Cleanup scatterlist layering violations
  dmaengine: imx-dma: cleanup scatterlist layering violations
  dmaengine: use proper name for the R-Car SoC
  dmaengine: imx-sdma: Fix compilation warning.
  dmaengine: imx-sdma: Handle return value of clk_prepare_enable
  dmaengine: pl330: Add IOMMU support to slave tranfers
  dmaengine: DW DMAC: Handle return value of clk_prepare_enable
  dmaengine: pl08x: use GENMASK() to create bitmasks
  dmaengine: pl08x: Add support for Faraday Technology FTDMAC020
  ...

Documentation/devicetree/bindings/dma/arm-pl08x.txt

@@ -3,6 +3,11 @@
 Required properties:
 - compatible: "arm,pl080", "arm,primecell";
 	      "arm,pl081", "arm,primecell";
+	      "faraday,ftdmac020", "arm,primecell"
+- arm,primecell-periphid: on the FTDMAC020 the primecell ID is not hard-coded
+  in the hardware and must be specified here as <0x0003b080>. This number
+  follows the PrimeCell standard numbering using the JEP106 vendor code 0x38
+  for Faraday Technology.
 - reg: Address range of the PL08x registers
 - interrupt: The PL08x interrupt number
 - clocks: The clock running the IP core clock
@@ -20,8 +25,8 @@ Optional properties:
 - dma-requests: contains the total number of DMA requests supported by the DMAC
 - memcpy-burst-size: the size of the bursts for memcpy: 1, 4, 8, 16, 32
   64, 128 or 256 bytes are legal values
-- memcpy-bus-width: the bus width used for memcpy: 8, 16 or 32 are legal
-  values
+- memcpy-bus-width: the bus width used for memcpy in bits: 8, 16 or 32 are legal
+  values, the Faraday FTDMAC020 can also accept 64 bits
 
 Clients
 Required properties:

Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt

+* Broadcom SBA RAID engine
+
+Required properties:
+- compatible: Should be one of the following
+	      "brcm,iproc-sba"
+	      "brcm,iproc-sba-v2"
+  The "brcm,iproc-sba" has support for only 6 PQ coefficients
+  The "brcm,iproc-sba-v2" has support for only 30 PQ coefficients
+- mboxes: List of phandle and mailbox channel specifiers
+
+Example:
+
+raid_mbox: mbox@67400000 {
+	...
+	#mbox-cells = <3>;
+	...
+};
+
+raid0 {
+	compatible = "brcm,iproc-sba-v2";
+	mboxes = <&raid_mbox 0 0x1 0xffff>,
+		 <&raid_mbox 1 0x1 0xffff>,
+		 <&raid_mbox 2 0x1 0xffff>,
+		 <&raid_mbox 3 0x1 0xffff>,
+		 <&raid_mbox 4 0x1 0xffff>,
+		 <&raid_mbox 5 0x1 0xffff>,
+		 <&raid_mbox 6 0x1 0xffff>,
+		 <&raid_mbox 7 0x1 0xffff>;
+};

Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt

@@ -30,8 +30,9 @@ Required Properties:
 
 - interrupts: interrupt specifiers for the DMAC, one for each entry in
   interrupt-names.
-- interrupt-names: one entry per channel, named "ch%u", where %u is the
-  channel number ranging from zero to the number of channels minus one.
+- interrupt-names: one entry for the error interrupt, named "error", plus one
+  entry per channel, named "ch%u", where %u is the channel number ranging from
+  zero to the number of channels minus one.
 
 - clock-names: "fck" for the functional clock
 - clocks: a list of phandle + clock-specifier pairs, one for each entry

Documentation/devicetree/bindings/dma/shdma.txt

 * SHDMA Device Tree bindings
 
-Sh-/r-mobile and r-car systems often have multiple identical DMA controller
+Sh-/r-mobile and R-Car systems often have multiple identical DMA controller
 instances, capable of serving any of a common set of DMA slave devices, using
 the same configuration. To describe this topology we require all compatible
 SHDMA DT nodes to be placed under a DMA multiplexer node. All such compatible

arch/arm/mach-lpc32xx/phy3250.c

@@ -137,6 +137,9 @@ static void pl08x_put_signal(const struct pl08x_channel_data *cd, int ch)
 }
 
 static struct pl08x_platform_data pl08x_pd = {
+	/* Some reasonable memcpy defaults */
+	.memcpy_burst_size = PL08X_BURST_SZ_256,
+	.memcpy_bus_width = PL08X_BUS_WIDTH_32_BITS,
 	.slave_channels = &pl08x_slave_channels[0],
 	.num_slave_channels = ARRAY_SIZE(pl08x_slave_channels),
 	.get_xfer_signal = pl08x_get_signal,

arch/arm/mach-s3c64xx/pl080.c

@@ -137,16 +137,10 @@ static const struct dma_slave_map s3c64xx_dma0_slave_map[] = {
 };
 
 struct pl08x_platform_data s3c64xx_dma0_plat_data = {
-	.memcpy_channel = {
-		.bus_id = "memcpy",
-		.cctl_memcpy =
-			(PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT |
-			PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT |
-			PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT |
-			PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT |
-			PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE |
-			PL080_CONTROL_PROT_SYS),
-	},
+	.memcpy_burst_size = PL08X_BURST_SZ_4,
+	.memcpy_bus_width = PL08X_BUS_WIDTH_32_BITS,
+	.memcpy_prot_buff = true,
+	.memcpy_prot_cache = true,
 	.lli_buses = PL08X_AHB1,
 	.mem_buses = PL08X_AHB1,
 	.get_xfer_signal = pl08x_get_xfer_signal,
@@ -238,16 +232,10 @@ static const struct dma_slave_map s3c64xx_dma1_slave_map[] = {
 };
 
 struct pl08x_platform_data s3c64xx_dma1_plat_data = {
-	.memcpy_channel = {
-		.bus_id = "memcpy",
-		.cctl_memcpy =
-			(PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT |
-			PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT |
-			PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT |
-			PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT |
-			PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE |
-			PL080_CONTROL_PROT_SYS),
-	},
+	.memcpy_burst_size = PL08X_BURST_SZ_4,
+	.memcpy_bus_width = PL08X_BUS_WIDTH_32_BITS,
+	.memcpy_prot_buff = true,
+	.memcpy_prot_cache = true,
 	.lli_buses = PL08X_AHB1,
 	.mem_buses = PL08X_AHB1,
 	.get_xfer_signal = pl08x_get_xfer_signal,

arch/arm/mach-spear/spear3xx.c

@@ -44,16 +44,10 @@ struct pl022_ssp_controller pl022_plat_data = {
 
 /* dmac device registration */
 struct pl08x_platform_data pl080_plat_data = {
-	.memcpy_channel = {
-		.bus_id = "memcpy",
-		.cctl_memcpy =
-			(PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
-			PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \
-			PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \
-			PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \
-			PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \
-			PL080_CONTROL_PROT_SYS),
-	},
+	.memcpy_burst_size = PL08X_BURST_SZ_16,
+	.memcpy_bus_width = PL08X_BUS_WIDTH_32_BITS,
+	.memcpy_prot_buff = true,
+	.memcpy_prot_cache = true,
 	.lli_buses = PL08X_AHB1,
 	.mem_buses = PL08X_AHB1,
 	.get_xfer_signal = pl080_get_signal,

arch/arm/mach-spear/spear6xx.c

@@ -322,16 +322,10 @@ static struct pl08x_channel_data spear600_dma_info[] = {
 };
 
 static struct pl08x_platform_data spear6xx_pl080_plat_data = {
-	.memcpy_channel = {
-		.bus_id = "memcpy",
-		.cctl_memcpy =
-			(PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
-			PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \
-			PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \
-			PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \
-			PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \
-			PL080_CONTROL_PROT_SYS),
-	},
+	.memcpy_burst_size = PL08X_BURST_SZ_16,
+	.memcpy_bus_width = PL08X_BUS_WIDTH_32_BITS,
+	.memcpy_prot_buff = true,
+	.memcpy_prot_cache = true,
 	.lli_buses = PL08X_AHB1,
 	.mem_buses = PL08X_AHB1,
 	.get_xfer_signal = pl080_get_signal,

crypto/async_tx/async_pq.c

@@ -62,9 +62,6 @@ do_async_gen_syndrome(struct dma_chan *chan,
 	dma_addr_t dma_dest[2];
 	int src_off = 0;
 
-	if (submit->flags & ASYNC_TX_FENCE)
-		dma_flags |= DMA_PREP_FENCE;
-
 	while (src_cnt > 0) {
 		submit->flags = flags_orig;
 		pq_src_cnt = min(src_cnt, dma_maxpq(dma, dma_flags));
@@ -83,6 +80,8 @@ do_async_gen_syndrome(struct dma_chan *chan,
 			if (cb_fn_orig)
 				dma_flags |= DMA_PREP_INTERRUPT;
 		}
+		if (submit->flags & ASYNC_TX_FENCE)
+			dma_flags |= DMA_PREP_FENCE;
 
 		/* Drivers force forward progress in case they can not provide
 		 * a descriptor

drivers/dma/Kconfig

@@ -62,8 +62,10 @@ config AMBA_PL08X
 	select DMA_ENGINE
 	select DMA_VIRTUAL_CHANNELS
 	help
-	  Platform has a PL08x DMAC device
-	  which can provide DMA engine support
+	  Say yes if your platform has a PL08x DMAC device which can
+	  provide DMA engine support. This includes the original ARM
+	  PL080 and PL081, Samsungs PL080 derivative and Faraday
+	  Technology's FTDMAC020 PL080 derivative.
 
 config AMCC_PPC440SPE_ADMA
 	tristate "AMCC PPC440SPe ADMA support"
@@ -99,6 +101,21 @@ config AXI_DMAC
 	  controller is often used in Analog Device's reference designs for FPGA
 	  platforms.
 
+config BCM_SBA_RAID
+	tristate "Broadcom SBA RAID engine support"
+	depends on ARM64 || COMPILE_TEST
+	depends on MAILBOX && RAID6_PQ
+	select DMA_ENGINE
+	select DMA_ENGINE_RAID
+	select ASYNC_TX_DISABLE_XOR_VAL_DMA
+	select ASYNC_TX_DISABLE_PQ_VAL_DMA
+	default ARCH_BCM_IPROC
+	help
+	  Enable support for Broadcom SBA RAID Engine. The SBA RAID
+	  engine is available on most of the Broadcom iProc SoCs. It
+	  has the capability to offload memcpy, xor and pq computation
+	  for raid5/6.
+
 config COH901318
 	bool "ST-Ericsson COH901318 DMA support"
 	select DMA_ENGINE
@@ -354,13 +371,12 @@ config MV_XOR_V2
 
 config MXS_DMA
 	bool "MXS DMA support"
-	depends on SOC_IMX23 || SOC_IMX28 || SOC_IMX6Q || SOC_IMX6UL
+	depends on ARCH_MXS || ARCH_MXC || COMPILE_TEST
 	select STMP_DEVICE
 	select DMA_ENGINE
 	help
 	  Support the MXS DMA engine. This engine including APBH-DMA
-	  and APBX-DMA is integrated into Freescale
-	  i.MX23/28/MX6Q/MX6DL/MX6UL chips.
+	  and APBX-DMA is integrated into some Freescale chips.
 
 config MX3_IPU
 	bool "MX3x Image Processing Unit support"

drivers/dma/Makefile

@@ -17,6 +17,7 @@ obj-$(CONFIG_AMCC_PPC440SPE_ADMA) += ppc4xx/
 obj-$(CONFIG_AT_HDMAC) += at_hdmac.o
 obj-$(CONFIG_AT_XDMAC) += at_xdmac.o
 obj-$(CONFIG_AXI_DMAC) += dma-axi-dmac.o
+obj-$(CONFIG_BCM_SBA_RAID) += bcm-sba-raid.o
 obj-$(CONFIG_COH901318) += coh901318.o coh901318_lli.o
 obj-$(CONFIG_DMA_BCM2835) += bcm2835-dma.o
 obj-$(CONFIG_DMA_JZ4740) += dma-jz4740.o

drivers/dma/dw/platform.c

@@ -306,8 +306,12 @@ static int dw_resume_early(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct dw_dma_chip *chip = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = clk_prepare_enable(chip->clk);
+	if (ret)
+		return ret;
 
-	clk_prepare_enable(chip->clk);
 	return dw_dma_enable(chip);
 }
 

drivers/dma/fsl_raid.c

@@ -877,7 +877,7 @@ static int fsl_re_remove(struct platform_device *ofdev)
 	return 0;
 }
 
-static struct of_device_id fsl_re_ids[] = {
+static const struct of_device_id fsl_re_ids[] = {
 	{ .compatible = "fsl,raideng-v1.0", },
 	{}
 };

drivers/dma/fsldma.c

@@ -269,6 +269,7 @@ static void fsl_chan_set_src_loop_size(struct fsldma_chan *chan, int size)
 	case 2:
 	case 4:
 	case 8:
+		mode &= ~FSL_DMA_MR_SAHTS_MASK;
 		mode |= FSL_DMA_MR_SAHE | (__ilog2(size) << 14);
 		break;
 	}
@@ -301,6 +302,7 @@ static void fsl_chan_set_dst_loop_size(struct fsldma_chan *chan, int size)
 	case 2:
 	case 4:
 	case 8:
+		mode &= ~FSL_DMA_MR_DAHTS_MASK;
 		mode |= FSL_DMA_MR_DAHE | (__ilog2(size) << 16);
 		break;
 	}
@@ -327,7 +329,8 @@ static void fsl_chan_set_request_count(struct fsldma_chan *chan, int size)
 	BUG_ON(size > 1024);
 
 	mode = get_mr(chan);
-	mode |= (__ilog2(size) << 24) & 0x0f000000;
+	mode &= ~FSL_DMA_MR_BWC_MASK;
+	mode |= (__ilog2(size) << 24) & FSL_DMA_MR_BWC_MASK;
 
 	set_mr(chan, mode);
 }

drivers/dma/fsldma.h

@@ -36,6 +36,10 @@
 #define FSL_DMA_MR_DAHE		0x00002000
 #define FSL_DMA_MR_SAHE		0x00001000
 
+#define FSL_DMA_MR_SAHTS_MASK	0x0000C000
+#define FSL_DMA_MR_DAHTS_MASK	0x00030000
+#define FSL_DMA_MR_BWC_MASK	0x0f000000
+
 /*
  * Bandwidth/pause control determines how many bytes a given
  * channel is allowed to transfer before the DMA engine pauses

drivers/dma/imx-dma.c

@@ -888,7 +888,7 @@ static struct dma_async_tx_descriptor *imxdma_prep_dma_cyclic(
 	sg_init_table(imxdmac->sg_list, periods);
 
 	for (i = 0; i < periods; i++) {
-		imxdmac->sg_list[i].page_link = 0;
+		sg_assign_page(&imxdmac->sg_list[i], NULL);
 		imxdmac->sg_list[i].offset = 0;
 		imxdmac->sg_list[i].dma_address = dma_addr;
 		sg_dma_len(&imxdmac->sg_list[i]) = period_len;
@@ -896,10 +896,7 @@ static struct dma_async_tx_descriptor *imxdma_prep_dma_cyclic(
 	}
 
 	/* close the loop */
-	imxdmac->sg_list[periods].offset = 0;
-	sg_dma_len(&imxdmac->sg_list[periods]) = 0;
-	imxdmac->sg_list[periods].page_link =
-		((unsigned long)imxdmac->sg_list | 0x01) & ~0x02;
+	sg_chain(imxdmac->sg_list, periods + 1, imxdmac->sg_list);
 
 	desc->type = IMXDMA_DESC_CYCLIC;
 	desc->sg = imxdmac->sg_list;

drivers/dma/imx-sdma.c

@@ -1323,7 +1323,7 @@ static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic(
 	}
 
 	if (period_len > 0xffff) {
-		dev_err(sdma->dev, "SDMA channel %d: maximum period size exceeded: %d > %d\n",
+		dev_err(sdma->dev, "SDMA channel %d: maximum period size exceeded: %zu > %d\n",
 				channel, period_len, 0xffff);
 		goto err_out;
 	}
@@ -1347,7 +1347,7 @@ static struct dma_async_tx_descriptor *sdma_prep_dma_cyclic(
 		if (i + 1 == num_periods)
 			param |= BD_WRAP;
 
-		dev_dbg(sdma->dev, "entry %d: count: %d dma: %#llx %s%s\n",
+		dev_dbg(sdma->dev, "entry %d: count: %zu dma: %#llx %s%s\n",
 				i, period_len, (u64)dma_addr,
 				param & BD_WRAP ? "wrap" : "",
 				param & BD_INTR ? " intr" : "");
@@ -1755,19 +1755,26 @@ static int sdma_probe(struct platform_device *pdev)
 	if (IS_ERR(sdma->clk_ahb))
 		return PTR_ERR(sdma->clk_ahb);
 
-	clk_prepare(sdma->clk_ipg);
-	clk_prepare(sdma->clk_ahb);
+	ret = clk_prepare(sdma->clk_ipg);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare(sdma->clk_ahb);
+	if (ret)
+		goto err_clk;
 
 	ret = devm_request_irq(&pdev->dev, irq, sdma_int_handler, 0, "sdma",
 			       sdma);
 	if (ret)
-		return ret;
+		goto err_irq;
 
 	sdma->irq = irq;
 
 	sdma->script_addrs = kzalloc(sizeof(*sdma->script_addrs), GFP_KERNEL);
-	if (!sdma->script_addrs)
-		return -ENOMEM;
+	if (!sdma->script_addrs) {
+		ret = -ENOMEM;
+		goto err_irq;
+	}
 
 	/* initially no scripts available */
 	saddr_arr = (s32 *)sdma->script_addrs;
@@ -1882,6 +1889,10 @@ static int sdma_probe(struct platform_device *pdev)
 	dma_async_device_unregister(&sdma->dma_device);
 err_init:
 	kfree(sdma->script_addrs);
+err_irq:
+	clk_unprepare(sdma->clk_ahb);
+err_clk:
+	clk_unprepare(sdma->clk_ipg);
 	return ret;
 }
 
@@ -1893,6 +1904,8 @@ static int sdma_remove(struct platform_device *pdev)
 	devm_free_irq(&pdev->dev, sdma->irq, sdma);
 	dma_async_device_unregister(&sdma->dma_device);
 	kfree(sdma->script_addrs);
+	clk_unprepare(sdma->clk_ahb);
+	clk_unprepare(sdma->clk_ipg);
 	/* Kill the tasklet */
 	for (i = 0; i < MAX_DMA_CHANNELS; i++) {
 		struct sdma_channel *sdmac = &sdma->channel[i];

drivers/dma/ioat/dca.c

@@ -336,8 +336,8 @@ struct dca_provider *ioat_dca_init(struct pci_dev *pdev, void __iomem *iobase)
 	}
 
 	if (dca3_tag_map_invalid(ioatdca->tag_map)) {
-		WARN_TAINT_ONCE(1, TAINT_FIRMWARE_WORKAROUND,
-				"%s %s: APICID_TAG_MAP set incorrectly by BIOS, disabling DCA\n",
+		add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK);
+		pr_warn_once("%s %s: APICID_TAG_MAP set incorrectly by BIOS, disabling DCA\n",
 			     dev_driver_string(&pdev->dev),
 			     dev_name(&pdev->dev));
 		free_dca_provider(dca);

drivers/dma/mv_xor_v2.c

@@ -42,6 +42,7 @@
 #define MV_XOR_V2_DMA_IMSG_THRD_OFF			0x018
 #define   MV_XOR_V2_DMA_IMSG_THRD_MASK			0x7FFF
 #define   MV_XOR_V2_DMA_IMSG_THRD_SHIFT			0x0
+#define   MV_XOR_V2_DMA_IMSG_TIMER_EN			BIT(18)
 #define MV_XOR_V2_DMA_DESQ_AWATTR_OFF			0x01C
   /* Same flags as MV_XOR_V2_DMA_DESQ_ARATTR_OFF */
 #define MV_XOR_V2_DMA_DESQ_ALLOC_OFF			0x04C
@@ -55,6 +56,9 @@
 #define MV_XOR_V2_DMA_DESQ_STOP_OFF			0x800
 #define MV_XOR_V2_DMA_DESQ_DEALLOC_OFF			0x804
 #define MV_XOR_V2_DMA_DESQ_ADD_OFF			0x808
+#define MV_XOR_V2_DMA_IMSG_TMOT				0x810
+#define   MV_XOR_V2_DMA_IMSG_TIMER_THRD_MASK		0x1FFF
+#define   MV_XOR_V2_DMA_IMSG_TIMER_THRD_SHIFT		0
 
 /* XOR Global registers */
 #define MV_XOR_V2_GLOB_BW_CTRL				0x4
@@ -90,6 +94,13 @@
  */
 #define MV_XOR_V2_DESC_NUM				1024
 
+/*
+ * Threshold values for descriptors and timeout, determined by
+ * experimentation as giving a good level of performance.
+ */
+#define MV_XOR_V2_DONE_IMSG_THRD  0x14
+#define MV_XOR_V2_TIMER_THRD      0xB0
+
 /**
  * struct mv_xor_v2_descriptor - DMA HW descriptor
  * @desc_id: used by S/W and is not affected by H/W.
@@ -246,6 +257,29 @@ static int mv_xor_v2_set_desc_size(struct mv_xor_v2_device *xor_dev)
 	return MV_XOR_V2_EXT_DESC_SIZE;
 }
 
+/*
+ * Set the IMSG threshold
+ */
+static inline
+void mv_xor_v2_enable_imsg_thrd(struct mv_xor_v2_device *xor_dev)
+{
+	u32 reg;
+
+	/* Configure threshold of number of descriptors, and enable timer */
+	reg = readl(xor_dev->dma_base + MV_XOR_V2_DMA_IMSG_THRD_OFF);
+	reg &= (~MV_XOR_V2_DMA_IMSG_THRD_MASK << MV_XOR_V2_DMA_IMSG_THRD_SHIFT);
+	reg |= (MV_XOR_V2_DONE_IMSG_THRD << MV_XOR_V2_DMA_IMSG_THRD_SHIFT);
+	reg |= MV_XOR_V2_DMA_IMSG_TIMER_EN;
+	writel(reg, xor_dev->dma_base + MV_XOR_V2_DMA_IMSG_THRD_OFF);
+
+	/* Configure Timer Threshold */
+	reg = readl(xor_dev->dma_base + MV_XOR_V2_DMA_IMSG_TMOT);
+	reg &= (~MV_XOR_V2_DMA_IMSG_TIMER_THRD_MASK <<
+		MV_XOR_V2_DMA_IMSG_TIMER_THRD_SHIFT);
+	reg |= (MV_XOR_V2_TIMER_THRD << MV_XOR_V2_DMA_IMSG_TIMER_THRD_SHIFT);
+	writel(reg, xor_dev->dma_base + MV_XOR_V2_DMA_IMSG_TMOT);
+}
+
 static irqreturn_t mv_xor_v2_interrupt_handler(int irq, void *data)
 {
 	struct mv_xor_v2_device *xor_dev = data;
@@ -501,9 +535,6 @@ static void mv_xor_v2_issue_pending(struct dma_chan *chan)
 	mv_xor_v2_add_desc_to_desq(xor_dev, xor_dev->npendings);
 	xor_dev->npendings = 0;
 
-	/* Activate the channel */
-	writel(0, xor_dev->dma_base + MV_XOR_V2_DMA_DESQ_STOP_OFF);
-
 	spin_unlock_bh(&xor_dev->lock);
 }
 
@@ -665,6 +696,27 @@ static int mv_xor_v2_descq_init(struct mv_xor_v2_device *xor_dev)
 	return 0;
 }
 
+static int mv_xor_v2_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct mv_xor_v2_device *xor_dev = platform_get_drvdata(dev);
+
+	/* Set this bit to disable to stop the XOR unit. */
+	writel(0x1, xor_dev->dma_base + MV_XOR_V2_DMA_DESQ_STOP_OFF);
+
+	return 0;
+}
+
+static int mv_xor_v2_resume(struct platform_device *dev)
+{
+	struct mv_xor_v2_device *xor_dev = platform_get_drvdata(dev);
+
+	mv_xor_v2_set_desc_size(xor_dev);
+	mv_xor_v2_enable_imsg_thrd(xor_dev);
+	mv_xor_v2_descq_init(xor_dev);
+
+	return 0;
+}
+
 static int mv_xor_v2_probe(struct platform_device *pdev)
 {
 	struct mv_xor_v2_device *xor_dev;
@@ -795,6 +847,8 @@ static int mv_xor_v2_probe(struct platform_device *pdev)
 	list_add_tail(&xor_dev->dmachan.device_node,
 		      &dma_dev->channels);
 
+	mv_xor_v2_enable_imsg_thrd(xor_dev);
+
 	mv_xor_v2_descq_init(xor_dev);
 
 	ret = dma_async_device_register(dma_dev);
@@ -844,6 +898,8 @@ MODULE_DEVICE_TABLE(of, mv_xor_v2_dt_ids);
 
 static struct platform_driver mv_xor_v2_driver = {
 	.probe		= mv_xor_v2_probe,
+	.suspend	= mv_xor_v2_suspend,
+	.resume		= mv_xor_v2_resume,
 	.remove		= mv_xor_v2_remove,
 	.driver		= {
 		.name	= "mv_xor_v2",

drivers/dma/mxs-dma.c

@@ -617,7 +617,7 @@ static struct dma_async_tx_descriptor *mxs_dma_prep_dma_cyclic(
 
 	if (period_len > MAX_XFER_BYTES) {
 		dev_err(mxs_dma->dma_device.dev,
-				"maximum period size exceeded: %d > %d\n",
+				"maximum period size exceeded: %zu > %d\n",
 				period_len, MAX_XFER_BYTES);
 		goto err_out;
 	}

drivers/dma/pl330.c

@@ -443,7 +443,10 @@ struct dma_pl330_chan {
 	/* For D-to-M and M-to-D channels */
 	int burst_sz; /* the peripheral fifo width */
 	int burst_len; /* the number of burst */
-	dma_addr_t fifo_addr;
+	phys_addr_t fifo_addr;
+	/* DMA-mapped view of the FIFO; may differ if an IOMMU is present */
+	dma_addr_t fifo_dma;
+	enum dma_data_direction dir;
 
 	/* for cyclic capability */
 	bool cyclic;
@@ -538,11 +541,6 @@ struct _xfer_spec {
 	struct dma_pl330_desc *desc;
 };
 
-static inline bool _queue_empty(struct pl330_thread *thrd)
-{
-	return thrd->req[0].desc == NULL && thrd->req[1].desc == NULL;
-}
-
 static inline bool _queue_full(struct pl330_thread *thrd)
 {
 	return thrd->req[0].desc != NULL && thrd->req[1].desc != NULL;
@@ -564,23 +562,6 @@ static inline u32 get_revision(u32 periph_id)
 	return (periph_id >> PERIPH_REV_SHIFT) & PERIPH_REV_MASK;
 }
 
-static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[],
-		enum pl330_dst da, u16 val)
-{
-	if (dry_run)
-		return SZ_DMAADDH;
-
-	buf[0] = CMD_DMAADDH;
-	buf[0] |= (da << 1);
-	buf[1] = val;
-	buf[2] = val >> 8;
-
-	PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n",
-		da == 1 ? "DA" : "SA", val);
-
-	return SZ_DMAADDH;
-}
-
 static inline u32 _emit_END(unsigned dry_run, u8 buf[])
 {
 	if (dry_run)
@@ -738,18 +719,6 @@ static inline u32 _emit_MOV(unsigned dry_run, u8 buf[],
 	return SZ_DMAMOV;
 }
 
-static inline u32 _emit_NOP(unsigned dry_run, u8 buf[])
-{
-	if (dry_run)
-		return SZ_DMANOP;
-
-	buf[0] = CMD_DMANOP;
-
-	PL330_DBGCMD_DUMP(SZ_DMANOP, "\tDMANOP\n");
-
-	return SZ_DMANOP;
-}
-
 static inline u32 _emit_RMB(unsigned dry_run, u8 buf[])
 {
 	if (dry_run)
@@ -817,39 +786,6 @@ static inline u32 _emit_STP(unsigned dry_run, u8 buf[],
 	return SZ_DMASTP;
 }
 
-static inline u32 _emit_STZ(unsigned dry_run, u8 buf[])
-{
-	if (dry_run)
-		return SZ_DMASTZ;
-
-	buf[0] = CMD_DMASTZ;
-
-	PL330_DBGCMD_DUMP(SZ_DMASTZ, "\tDMASTZ\n");
-
-	return SZ_DMASTZ;
-}
-
-static inline u32 _emit_WFE(unsigned dry_run, u8 buf[], u8 ev,
-		unsigned invalidate)
-{
-	if (dry_run)
-		return SZ_DMAWFE;
-
-	buf[0] = CMD_DMAWFE;
-
-	ev &= 0x1f;
-	ev <<= 3;
-	buf[1] = ev;
-
-	if (invalidate)
-		buf[1] |= (1 << 1);
-
-	PL330_DBGCMD_DUMP(SZ_DMAWFE, "\tDMAWFE %u%s\n",
-		ev >> 3, invalidate ? ", I" : "");
-
-	return SZ_DMAWFE;
-}
-
 static inline u32 _emit_WFP(unsigned dry_run, u8 buf[],
 		enum pl330_cond cond, u8 peri)
 {
@@ -2120,11 +2056,60 @@ static int pl330_alloc_chan_resources(struct dma_chan *chan)
 	return 1;
 }
 
+/*
+ * We need the data direction between the DMAC (the dma-mapping "device") and
+ * the FIFO (the dmaengine "dev"), from the FIFO's point of view. Confusing!
+ */
+static enum dma_data_direction
+pl330_dma_slave_map_dir(enum dma_transfer_direction dir)
+{
+	switch (dir) {
+	case DMA_MEM_TO_DEV:
+		return DMA_FROM_DEVICE;
+	case DMA_DEV_TO_MEM:
+		return DMA_TO_DEVICE;
+	case DMA_DEV_TO_DEV:
+		return DMA_BIDIRECTIONAL;
+	default:
+		return DMA_NONE;
+	}
+}
+
+static void pl330_unprep_slave_fifo(struct dma_pl330_chan *pch)
+{
+	if (pch->dir != DMA_NONE)
+		dma_unmap_resource(pch->chan.device->dev, pch->fifo_dma,
+				   1 << pch->burst_sz, pch->dir, 0);
+	pch->dir = DMA_NONE;
+}
+
+
+static bool pl330_prep_slave_fifo(struct dma_pl330_chan *pch,
+				  enum dma_transfer_direction dir)
+{
+	struct device *dev = pch->chan.device->dev;
+	enum dma_data_direction dma_dir = pl330_dma_slave_map_dir(dir);
+
+	/* Already mapped for this config? */
+	if (pch->dir == dma_dir)
+		return true;
+
+	pl330_unprep_slave_fifo(pch);
+	pch->fifo_dma = dma_map_resource(dev, pch->fifo_addr,
+					 1 << pch->burst_sz, dma_dir, 0);
+	if (dma_mapping_error(dev, pch->fifo_dma))
+		return false;
+
+	pch->dir = dma_dir;
+	return true;
+}
+
 static int pl330_config(struct dma_chan *chan,
 			struct dma_slave_config *slave_config)
 {
 	struct dma_pl330_chan *pch = to_pchan(chan);
 
+	pl330_unprep_slave_fifo(pch);
 	if (slave_config->direction == DMA_MEM_TO_DEV) {
 		if (slave_config->dst_addr)
 			pch->fifo_addr = slave_config->dst_addr;
@@ -2235,6 +2220,7 @@ static void pl330_free_chan_resources(struct dma_chan *chan)
 	spin_unlock_irqrestore(&pl330->lock, flags);
 	pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
 	pm_runtime_put_autosuspend(pch->dmac->ddma.dev);
+	pl330_unprep_slave_fifo(pch);
 }
 
 static int pl330_get_current_xferred_count(struct dma_pl330_chan *pch,
@@ -2564,6 +2550,9 @@ static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
 		return NULL;
 	}
 
+	if (!pl330_prep_slave_fifo(pch, direction))
+		return NULL;
+
 	for (i = 0; i < len / period_len; i++) {
 		desc = pl330_get_desc(pch);
 		if (!desc) {
@@ -2593,12 +2582,12 @@ static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
 			desc->rqcfg.src_inc = 1;
 			desc->rqcfg.dst_inc = 0;
 			src = dma_addr;
-			dst = pch->fifo_addr;
+			dst = pch->fifo_dma;
 			break;
 		case DMA_DEV_TO_MEM:
 			desc->rqcfg.src_inc = 0;
 			desc->rqcfg.dst_inc = 1;
-			src = pch->fifo_addr;
+			src = pch->fifo_dma;
 			dst = dma_addr;
 			break;
 		default:
@@ -2711,12 +2700,12 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 	struct dma_pl330_chan *pch = to_pchan(chan);
 	struct scatterlist *sg;
 	int i;
-	dma_addr_t addr;
 
 	if (unlikely(!pch || !sgl || !sg_len))
 		return NULL;
 
-	addr = pch->fifo_addr;
+	if (!pl330_prep_slave_fifo(pch, direction))
+		return NULL;
 
 	first = NULL;
 
@@ -2742,13 +2731,13 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 		if (direction == DMA_MEM_TO_DEV) {
 			desc->rqcfg.src_inc = 1;
 			desc->rqcfg.dst_inc = 0;
-			fill_px(&desc->px,
-				addr, sg_dma_address(sg), sg_dma_len(sg));
+			fill_px(&desc->px, pch->fifo_dma, sg_dma_address(sg),
+				sg_dma_len(sg));
 		} else {
 			desc->rqcfg.src_inc = 0;
 			desc->rqcfg.dst_inc = 1;
-			fill_px(&desc->px,
-				sg_dma_address(sg), addr, sg_dma_len(sg));
+			fill_px(&desc->px, sg_dma_address(sg), pch->fifo_dma,
+				sg_dma_len(sg));
 		}
 
 		desc->rqcfg.brst_size = pch->burst_sz;
@@ -2906,6 +2895,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
 		pch->thread = NULL;
 		pch->chan.device = pd;
 		pch->dmac = pl330;
+		pch->dir = DMA_NONE;
 
 		/* Add the channel to the DMAC list */
 		list_add_tail(&pch->chan.device_node, &pd->channels);

drivers/dma/qcom/hidma.c

 /*
  * Qualcomm Technologies HIDMA DMA engine interface
  *
- * Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2015-2017, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -210,6 +210,7 @@ static int hidma_chan_init(struct hidma_dev *dmadev, u32 dma_sig)
 	INIT_LIST_HEAD(&mchan->prepared);
 	INIT_LIST_HEAD(&mchan->active);
 	INIT_LIST_HEAD(&mchan->completed);
+	INIT_LIST_HEAD(&mchan->queued);
 
 	spin_lock_init(&mchan->lock);
 	list_add_tail(&mchan->chan.device_node, &ddev->channels);
@@ -230,9 +231,15 @@ static void hidma_issue_pending(struct dma_chan *dmach)
 	struct hidma_chan *mchan = to_hidma_chan(dmach);
 	struct hidma_dev *dmadev = mchan->dmadev;
 	unsigned long flags;
+	struct hidma_desc *qdesc, *next;
 	int status;
 
 	spin_lock_irqsave(&mchan->lock, flags);
+	list_for_each_entry_safe(qdesc, next, &mchan->queued, node) {
+		hidma_ll_queue_request(dmadev->lldev, qdesc->tre_ch);
+		list_move_tail(&qdesc->node, &mchan->active);
+	}
+
 	if (!mchan->running) {
 		struct hidma_desc *desc = list_first_entry(&mchan->active,
 							   struct hidma_desc,
@@ -315,17 +322,18 @@ static dma_cookie_t hidma_tx_submit(struct dma_async_tx_descriptor *txd)
 		pm_runtime_put_autosuspend(dmadev->ddev.dev);
 		return -ENODEV;
 	}
+	pm_runtime_mark_last_busy(dmadev->ddev.dev);
+	pm_runtime_put_autosuspend(dmadev->ddev.dev);
 
 	mdesc = container_of(txd, struct hidma_desc, desc);
 	spin_lock_irqsave(&mchan->lock, irqflags);
 
-	/* Move descriptor to active */
-	list_move_tail(&mdesc->node, &mchan->active);
+	/* Move descriptor to queued */
+	list_move_tail(&mdesc->node, &mchan->queued);
 
 	/* Update cookie */
 	cookie = dma_cookie_assign(txd);
 
-	hidma_ll_queue_request(dmadev->lldev, mdesc->tre_ch);
 	spin_unlock_irqrestore(&mchan->lock, irqflags);
 
 	return cookie;
@@ -431,6 +439,7 @@ static int hidma_terminate_channel(struct dma_chan *chan)
 	list_splice_init(&mchan->active, &list);
 	list_splice_init(&mchan->prepared, &list);
 	list_splice_init(&mchan->completed, &list);
+	list_splice_init(&mchan->queued, &list);
 	spin_unlock_irqrestore(&mchan->lock, irqflags);
 
 	/* this suspends the existing transfer */
@@ -795,8 +804,11 @@ static int hidma_probe(struct platform_device *pdev)
 	device_property_read_u32(&pdev->dev, "desc-count",
 				 &dmadev->nr_descriptors);
 
-	if (!dmadev->nr_descriptors && nr_desc_prm)
+	if (nr_desc_prm) {
+		dev_info(&pdev->dev, "overriding number of descriptors as %d\n",
+			 nr_desc_prm);
 		dmadev->nr_descriptors = nr_desc_prm;
+	}
 
 	if (!dmadev->nr_descriptors)
 		dmadev->nr_descriptors = HIDMA_NR_DEFAULT_DESC;

drivers/dma/qcom/hidma.h

@@ -104,6 +104,7 @@ struct hidma_chan {
 	struct dma_chan			chan;
 	struct list_head		free;
 	struct list_head		prepared;
+	struct list_head		queued;
 	struct list_head		active;
 	struct list_head		completed;
 

drivers/dma/qcom/hidma_mgmt.c

 /*
  * Qualcomm Technologies HIDMA DMA engine Management interface
  *
- * Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2015-2017, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -49,6 +49,26 @@
 #define HIDMA_AUTOSUSPEND_TIMEOUT	2000
 #define HIDMA_MAX_CHANNEL_WEIGHT	15
 
+static unsigned int max_write_request;
+module_param(max_write_request, uint, 0644);
+MODULE_PARM_DESC(max_write_request,
+		"maximum write burst (default: ACPI/DT value)");
+
+static unsigned int max_read_request;
+module_param(max_read_request, uint, 0644);
+MODULE_PARM_DESC(max_read_request,
+		"maximum read burst (default: ACPI/DT value)");
+
+static unsigned int max_wr_xactions;
+module_param(max_wr_xactions, uint, 0644);
+MODULE_PARM_DESC(max_wr_xactions,
+	"maximum number of write transactions (default: ACPI/DT value)");
+
+static unsigned int max_rd_xactions;
+module_param(max_rd_xactions, uint, 0644);
+MODULE_PARM_DESC(max_rd_xactions,
+	"maximum number of read transactions (default: ACPI/DT value)");
+
 int hidma_mgmt_setup(struct hidma_mgmt_dev *mgmtdev)
 {
 	unsigned int i;
@@ -207,12 +227,25 @@ static int hidma_mgmt_probe(struct platform_device *pdev)
 		goto out;
 	}
 
+	if (max_write_request) {
+		dev_info(&pdev->dev, "overriding max-write-burst-bytes: %d\n",
+			max_write_request);
+		mgmtdev->max_write_request = max_write_request;
+	} else
+		max_write_request = mgmtdev->max_write_request;
+
 	rc = device_property_read_u32(&pdev->dev, "max-read-burst-bytes",
 				      &mgmtdev->max_read_request);
 	if (rc) {
 		dev_err(&pdev->dev, "max-read-burst-bytes missing\n");
 		goto out;
 	}
+	if (max_read_request) {
+		dev_info(&pdev->dev, "overriding max-read-burst-bytes: %d\n",
+			max_read_request);
+		mgmtdev->max_read_request = max_read_request;
+	} else
+		max_read_request = mgmtdev->max_read_request;
 
 	rc = device_property_read_u32(&pdev->dev, "max-write-transactions",
 				      &mgmtdev->max_wr_xactions);
@@ -220,6 +253,12 @@ static int hidma_mgmt_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "max-write-transactions missing\n");
 		goto out;
 	}
+	if (max_wr_xactions) {
+		dev_info(&pdev->dev, "overriding max-write-transactions: %d\n",
+			max_wr_xactions);
+		mgmtdev->max_wr_xactions = max_wr_xactions;
+	} else
+		max_wr_xactions = mgmtdev->max_wr_xactions;
 
 	rc = device_property_read_u32(&pdev->dev, "max-read-transactions",
 				      &mgmtdev->max_rd_xactions);
@@ -227,6 +266,12 @@ static int hidma_mgmt_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "max-read-transactions missing\n");
 		goto out;
 	}
+	if (max_rd_xactions) {
+		dev_info(&pdev->dev, "overriding max-read-transactions: %d\n",
+			max_rd_xactions);
+		mgmtdev->max_rd_xactions = max_rd_xactions;
+	} else
+		max_rd_xactions = mgmtdev->max_rd_xactions;
 
 	mgmtdev->priority = devm_kcalloc(&pdev->dev,
 					 mgmtdev->dma_channels,

drivers/dma/sh/rcar-dmac.c

@@ -144,6 +144,7 @@ struct rcar_dmac_chan_map {
  * @chan: base DMA channel object
  * @iomem: channel I/O memory base
  * @index: index of this channel in the controller
+ * @irq: channel IRQ
  * @src: slave memory address and size on the source side
  * @dst: slave memory address and size on the destination side
  * @mid_rid: hardware MID/RID for the DMA client using this channel
@@ -161,6 +162,7 @@ struct rcar_dmac_chan {
 	struct dma_chan chan;
 	void __iomem *iomem;
 	unsigned int index;
+	int irq;
 
 	struct rcar_dmac_chan_slave src;
 	struct rcar_dmac_chan_slave dst;
@@ -1008,7 +1010,11 @@ static void rcar_dmac_free_chan_resources(struct dma_chan *chan)
 	rcar_dmac_chan_halt(rchan);
 	spin_unlock_irq(&rchan->lock);
 
-	/* Now no new interrupts will occur */
+	/*
+	 * Now no new interrupts will occur, but one might already be
+	 * running. Wait for it to finish before freeing resources.
+	 */
+	synchronize_irq(rchan->irq);
 
 	if (rchan->mid_rid >= 0) {
 		/* The caller is holding dma_list_mutex */
@@ -1366,6 +1372,13 @@ static void rcar_dmac_issue_pending(struct dma_chan *chan)
 	spin_unlock_irqrestore(&rchan->lock, flags);
 }
 
+static void rcar_dmac_device_synchronize(struct dma_chan *chan)
+{
+	struct rcar_dmac_chan *rchan = to_rcar_dmac_chan(chan);
+
+	synchronize_irq(rchan->irq);
+}
+
 /* -----------------------------------------------------------------------------
  * IRQ handling
  */
@@ -1650,7 +1663,6 @@ static int rcar_dmac_chan_probe(struct rcar_dmac *dmac,
 	struct dma_chan *chan = &rchan->chan;
 	char pdev_irqname[5];
 	char *irqname;
-	int irq;
 	int ret;
 
 	rchan->index = index;
@@ -1667,8 +1679,8 @@ static int rcar_dmac_chan_probe(struct rcar_dmac *dmac,
 
 	/* Request the channel interrupt. */
 	sprintf(pdev_irqname, "ch%u", index);
-	irq = platform_get_irq_byname(pdev, pdev_irqname);
-	if (irq < 0) {
+	rchan->irq = platform_get_irq_byname(pdev, pdev_irqname);
+	if (rchan->irq < 0) {
 		dev_err(dmac->dev, "no IRQ specified for channel %u\n", index);
 		return -ENODEV;
 	}
@@ -1678,11 +1690,13 @@ static int rcar_dmac_chan_probe(struct rcar_dmac *dmac,
 	if (!irqname)
 		return -ENOMEM;
 
-	ret = devm_request_threaded_irq(dmac->dev, irq, rcar_dmac_isr_channel,
+	ret = devm_request_threaded_irq(dmac->dev, rchan->irq,
+					rcar_dmac_isr_channel,
 					rcar_dmac_isr_channel_thread, 0,
 					irqname, rchan);
 	if (ret) {
-		dev_err(dmac->dev, "failed to request IRQ %u (%d)\n", irq, ret);
+		dev_err(dmac->dev, "failed to request IRQ %u (%d)\n",
+			rchan->irq, ret);
 		return ret;
 	}
 
@@ -1846,6 +1860,7 @@ static int rcar_dmac_probe(struct platform_device *pdev)
 	engine->device_terminate_all = rcar_dmac_chan_terminate_all;
 	engine->device_tx_status = rcar_dmac_tx_status;
 	engine->device_issue_pending = rcar_dmac_issue_pending;
+	engine->device_synchronize = rcar_dmac_device_synchronize;
 
 	ret = dma_async_device_register(engine);
 	if (ret < 0)

drivers/dma/ste_dma40.c

@@ -2528,10 +2528,7 @@ dma40_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t dma_addr,
 		dma_addr += period_len;
 	}
 
-	sg[periods].offset = 0;
-	sg_dma_len(&sg[periods]) = 0;
-	sg[periods].page_link =
-		((unsigned long)sg | 0x01) & ~0x02;
+	sg_chain(sg, periods + 1, sg);
 
 	txd = d40_prep_sg(chan, sg, sg, periods, direction,
 			  DMA_PREP_INTERRUPT);

drivers/dma/tegra20-apb-dma.c

@@ -1492,37 +1492,9 @@ static int tegra_dma_remove(struct platform_device *pdev)
 }
 
 static int tegra_dma_runtime_suspend(struct device *dev)
-{
-	struct tegra_dma *tdma = dev_get_drvdata(dev);
-
-	clk_disable_unprepare(tdma->dma_clk);
-	return 0;
-}
-
-static int tegra_dma_runtime_resume(struct device *dev)
-{
-	struct tegra_dma *tdma = dev_get_drvdata(dev);
-	int ret;
-
-	ret = clk_prepare_enable(tdma->dma_clk);
-	if (ret < 0) {
-		dev_err(dev, "clk_enable failed: %d\n", ret);
-		return ret;
-	}
-	return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int tegra_dma_pm_suspend(struct device *dev)
 {
 	struct tegra_dma *tdma = dev_get_drvdata(dev);
 	int i;
-	int ret;
-
-	/* Enable clock before accessing register */
-	ret = pm_runtime_get_sync(dev);
-	if (ret < 0)
-		return ret;
 
 	tdma->reg_gen = tdma_read(tdma, TEGRA_APBDMA_GENERAL);
 	for (i = 0; i < tdma->chip_data->nr_channels; i++) {
@@ -1543,21 +1515,21 @@ static int tegra_dma_pm_suspend(struct device *dev)
 						  TEGRA_APBDMA_CHAN_WCOUNT);
 	}
 
-	/* Disable clock */
-	pm_runtime_put(dev);
+	clk_disable_unprepare(tdma->dma_clk);
+
 	return 0;
 }
 
-static int tegra_dma_pm_resume(struct device *dev)
+static int tegra_dma_runtime_resume(struct device *dev)
 {
 	struct tegra_dma *tdma = dev_get_drvdata(dev);
-	int i;
-	int ret;
+	int i, ret;
 
-	/* Enable clock before accessing register */
-	ret = pm_runtime_get_sync(dev);
-	if (ret < 0)
+	ret = clk_prepare_enable(tdma->dma_clk);
+	if (ret < 0) {
+		dev_err(dev, "clk_enable failed: %d\n", ret);
 		return ret;
+	}
 
 	tdma_write(tdma, TEGRA_APBDMA_GENERAL, tdma->reg_gen);
 	tdma_write(tdma, TEGRA_APBDMA_CONTROL, 0);
@@ -1582,16 +1554,14 @@ static int tegra_dma_pm_resume(struct device *dev)
 			(ch_reg->csr & ~TEGRA_APBDMA_CSR_ENB));
 	}
 
-	/* Disable clock */
-	pm_runtime_put(dev);
 	return 0;
 }
-#endif
 
 static const struct dev_pm_ops tegra_dma_dev_pm_ops = {
 	SET_RUNTIME_PM_OPS(tegra_dma_runtime_suspend, tegra_dma_runtime_resume,
 			   NULL)
-	SET_SYSTEM_SLEEP_PM_OPS(tegra_dma_pm_suspend, tegra_dma_pm_resume)
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
 };
 
 static const struct of_device_id tegra_dma_of_match[] = {

drivers/dma/xilinx/zynqmp_dma.c

@@ -794,9 +794,6 @@ static struct dma_async_tx_descriptor *zynqmp_dma_prep_memcpy(
 
 	chan = to_chan(dchan);
 
-	if (len > ZYNQMP_DMA_MAX_TRANS_LEN)
-		return NULL;
-
 	desc_cnt = DIV_ROUND_UP(len, ZYNQMP_DMA_MAX_TRANS_LEN);
 
 	spin_lock_bh(&chan->lock);

include/linux/amba/pl080.h

@@ -44,7 +44,14 @@
 
 #define PL080_SYNC				(0x34)
 
-/* Per channel configuration registers */
+/* The Faraday Technology FTDMAC020 variant registers */
+#define FTDMAC020_CH_BUSY			(0x20)
+/* Identical to PL080_CONFIG */
+#define FTDMAC020_CSR				(0x24)
+/* Identical to PL080_SYNC */
+#define FTDMAC020_SYNC				(0x2C)
+#define FTDMAC020_REVISION			(0x30)
+#define FTDMAC020_FEATURE			(0x34)
 
 /* Per channel configuration registers */
 #define PL080_Cx_BASE(x)			((0x100 + (x * 0x20)))
@@ -55,13 +62,20 @@
 #define PL080_CH_CONFIG				(0x10)
 #define PL080S_CH_CONTROL2			(0x10)
 #define PL080S_CH_CONFIG			(0x14)
-
-#define PL080_LLI_ADDR_MASK			(0x3fffffff << 2)
+/* The Faraday FTDMAC020 derivative shuffles the registers around */
+#define FTDMAC020_CH_CSR			(0x00)
+#define FTDMAC020_CH_CFG			(0x04)
+#define FTDMAC020_CH_SRC_ADDR			(0x08)
+#define FTDMAC020_CH_DST_ADDR			(0x0C)
+#define FTDMAC020_CH_LLP			(0x10)
+#define FTDMAC020_CH_SIZE			(0x14)
+
+#define PL080_LLI_ADDR_MASK			GENMASK(31, 2)
 #define PL080_LLI_ADDR_SHIFT			(2)
 #define PL080_LLI_LM_AHB2			BIT(0)
 
 #define PL080_CONTROL_TC_IRQ_EN			BIT(31)
-#define PL080_CONTROL_PROT_MASK			(0x7 << 28)
+#define PL080_CONTROL_PROT_MASK			GENMASK(30, 28)
 #define PL080_CONTROL_PROT_SHIFT		(28)
 #define PL080_CONTROL_PROT_CACHE		BIT(30)
 #define PL080_CONTROL_PROT_BUFF			BIT(29)
@@ -70,16 +84,16 @@
 #define PL080_CONTROL_SRC_INCR			BIT(26)
 #define PL080_CONTROL_DST_AHB2			BIT(25)
 #define PL080_CONTROL_SRC_AHB2			BIT(24)
-#define PL080_CONTROL_DWIDTH_MASK		(0x7 << 21)
+#define PL080_CONTROL_DWIDTH_MASK		GENMASK(23, 21)
 #define PL080_CONTROL_DWIDTH_SHIFT		(21)
-#define PL080_CONTROL_SWIDTH_MASK		(0x7 << 18)
+#define PL080_CONTROL_SWIDTH_MASK		GENMASK(20, 18)
 #define PL080_CONTROL_SWIDTH_SHIFT		(18)
-#define PL080_CONTROL_DB_SIZE_MASK		(0x7 << 15)
+#define PL080_CONTROL_DB_SIZE_MASK		GENMASK(17, 15)
 #define PL080_CONTROL_DB_SIZE_SHIFT		(15)
-#define PL080_CONTROL_SB_SIZE_MASK		(0x7 << 12)
+#define PL080_CONTROL_SB_SIZE_MASK		GENMASK(14, 12)
 #define PL080_CONTROL_SB_SIZE_SHIFT		(12)
-#define PL080_CONTROL_TRANSFER_SIZE_MASK	(0xfff << 0)
-#define PL080S_CONTROL_TRANSFER_SIZE_MASK	(0x1ffffff << 0)
+#define PL080_CONTROL_TRANSFER_SIZE_MASK	GENMASK(11, 0)
+#define PL080S_CONTROL_TRANSFER_SIZE_MASK	GENMASK(24, 0)
 #define PL080_CONTROL_TRANSFER_SIZE_SHIFT	(0)
 
 #define PL080_BSIZE_1				(0x0)
@@ -102,11 +116,11 @@
 #define PL080_CONFIG_LOCK			BIT(16)
 #define PL080_CONFIG_TC_IRQ_MASK		BIT(15)
 #define PL080_CONFIG_ERR_IRQ_MASK		BIT(14)
-#define PL080_CONFIG_FLOW_CONTROL_MASK		(0x7 << 11)
+#define PL080_CONFIG_FLOW_CONTROL_MASK		GENMASK(13, 11)
 #define PL080_CONFIG_FLOW_CONTROL_SHIFT		(11)
-#define PL080_CONFIG_DST_SEL_MASK		(0xf << 6)
+#define PL080_CONFIG_DST_SEL_MASK		GENMASK(9, 6)
 #define PL080_CONFIG_DST_SEL_SHIFT		(6)
-#define PL080_CONFIG_SRC_SEL_MASK		(0xf << 1)
+#define PL080_CONFIG_SRC_SEL_MASK		GENMASK(4, 1)
 #define PL080_CONFIG_SRC_SEL_SHIFT		(1)
 #define PL080_CONFIG_ENABLE			BIT(0)
 
@@ -119,6 +133,73 @@
 #define PL080_FLOW_PER2MEM_PER			(0x6)
 #define PL080_FLOW_SRC2DST_SRC			(0x7)
 
+#define FTDMAC020_CH_CSR_TC_MSK			BIT(31)
+/* Later versions have a threshold in bits 24..26,  */
+#define FTDMAC020_CH_CSR_FIFOTH_MSK		GENMASK(26, 24)
+#define FTDMAC020_CH_CSR_FIFOTH_SHIFT		(24)
+#define FTDMAC020_CH_CSR_CHPR1_MSK		GENMASK(23, 22)
+#define FTDMAC020_CH_CSR_PROT3			BIT(21)
+#define FTDMAC020_CH_CSR_PROT2			BIT(20)
+#define FTDMAC020_CH_CSR_PROT1			BIT(19)
+#define FTDMAC020_CH_CSR_SRC_SIZE_MSK		GENMASK(18, 16)
+#define FTDMAC020_CH_CSR_SRC_SIZE_SHIFT		(16)
+#define FTDMAC020_CH_CSR_ABT			BIT(15)
+#define FTDMAC020_CH_CSR_SRC_WIDTH_MSK		GENMASK(13, 11)
+#define FTDMAC020_CH_CSR_SRC_WIDTH_SHIFT	(11)
+#define FTDMAC020_CH_CSR_DST_WIDTH_MSK		GENMASK(10, 8)
+#define FTDMAC020_CH_CSR_DST_WIDTH_SHIFT	(8)
+#define FTDMAC020_CH_CSR_MODE			BIT(7)
+/* 00 = increase, 01 = decrease, 10 = fix */
+#define FTDMAC020_CH_CSR_SRCAD_CTL_MSK		GENMASK(6, 5)
+#define FTDMAC020_CH_CSR_SRCAD_CTL_SHIFT	(5)
+#define FTDMAC020_CH_CSR_DSTAD_CTL_MSK		GENMASK(4, 3)
+#define FTDMAC020_CH_CSR_DSTAD_CTL_SHIFT	(3)
+#define FTDMAC020_CH_CSR_SRC_SEL		BIT(2)
+#define FTDMAC020_CH_CSR_DST_SEL		BIT(1)
+#define FTDMAC020_CH_CSR_EN			BIT(0)
+
+/* FIFO threshold setting */
+#define FTDMAC020_CH_CSR_FIFOTH_1		(0x0)
+#define FTDMAC020_CH_CSR_FIFOTH_2		(0x1)
+#define FTDMAC020_CH_CSR_FIFOTH_4		(0x2)
+#define FTDMAC020_CH_CSR_FIFOTH_8		(0x3)
+#define FTDMAC020_CH_CSR_FIFOTH_16		(0x4)
+/* The FTDMAC020 supports 64bit wide transfers */
+#define FTDMAC020_WIDTH_64BIT			(0x3)
+/* Address can be increased, decreased or fixed */
+#define FTDMAC020_CH_CSR_SRCAD_CTL_INC		(0x0)
+#define FTDMAC020_CH_CSR_SRCAD_CTL_DEC		(0x1)
+#define FTDMAC020_CH_CSR_SRCAD_CTL_FIXED	(0x2)
+
+#define FTDMAC020_CH_CFG_LLP_CNT_MASK		GENMASK(19, 16)
+#define FTDMAC020_CH_CFG_LLP_CNT_SHIFT		(16)
+#define FTDMAC020_CH_CFG_BUSY			BIT(8)
+#define FTDMAC020_CH_CFG_INT_ABT_MASK		BIT(2)
+#define FTDMAC020_CH_CFG_INT_ERR_MASK		BIT(1)
+#define FTDMAC020_CH_CFG_INT_TC_MASK		BIT(0)
+
+/* Inside the LLIs, the applicable CSR fields are mapped differently */
+#define FTDMAC020_LLI_TC_MSK			BIT(28)
+#define FTDMAC020_LLI_SRC_WIDTH_MSK		GENMASK(27, 25)
+#define FTDMAC020_LLI_SRC_WIDTH_SHIFT		(25)
+#define FTDMAC020_LLI_DST_WIDTH_MSK		GENMASK(24, 22)
+#define FTDMAC020_LLI_DST_WIDTH_SHIFT		(22)
+#define FTDMAC020_LLI_SRCAD_CTL_MSK		GENMASK(21, 20)
+#define FTDMAC020_LLI_SRCAD_CTL_SHIFT		(20)
+#define FTDMAC020_LLI_DSTAD_CTL_MSK		GENMASK(19, 18)
+#define FTDMAC020_LLI_DSTAD_CTL_SHIFT		(18)
+#define FTDMAC020_LLI_SRC_SEL			BIT(17)
+#define FTDMAC020_LLI_DST_SEL			BIT(16)
+#define FTDMAC020_LLI_TRANSFER_SIZE_MASK	GENMASK(11, 0)
+#define FTDMAC020_LLI_TRANSFER_SIZE_SHIFT	(0)
+
+#define FTDMAC020_CFG_LLP_CNT_MASK		GENMASK(19, 16)
+#define FTDMAC020_CFG_LLP_CNT_SHIFT		(16)
+#define FTDMAC020_CFG_BUSY			BIT(8)
+#define FTDMAC020_CFG_INT_ABT_MSK		BIT(2)
+#define FTDMAC020_CFG_INT_ERR_MSK		BIT(1)
+#define FTDMAC020_CFG_INT_TC_MSK		BIT(0)
+
 /* DMA linked list chain structure */
 
 struct pl080_lli {

include/linux/amba/pl08x.h

@@ -47,8 +47,6 @@ enum {
  * devices with static assignments
  * @muxval: a number usually used to poke into some mux regiser to
  * mux in the signal to this channel
- * @cctl_memcpy: options for the channel control register for memcpy
- *  *** not used for slave channels ***
  * @addr: source/target address in physical memory for this DMA channel,
  * can be the address of a FIFO register for burst requests for example.
  * This can be left undefined if the PrimeCell API is used for configuring
@@ -63,12 +61,28 @@ struct pl08x_channel_data {
 	int min_signal;
 	int max_signal;
 	u32 muxval;
-	u32 cctl_memcpy;
 	dma_addr_t addr;
 	bool single;
 	u8 periph_buses;
 };
 
+enum pl08x_burst_size {
+	PL08X_BURST_SZ_1,
+	PL08X_BURST_SZ_4,
+	PL08X_BURST_SZ_8,
+	PL08X_BURST_SZ_16,
+	PL08X_BURST_SZ_32,
+	PL08X_BURST_SZ_64,
+	PL08X_BURST_SZ_128,
+	PL08X_BURST_SZ_256,
+};
+
+enum pl08x_bus_width {
+	PL08X_BUS_WIDTH_8_BITS,
+	PL08X_BUS_WIDTH_16_BITS,
+	PL08X_BUS_WIDTH_32_BITS,
+};
+
 /**
  * struct pl08x_platform_data - the platform configuration for the PL08x
  * PrimeCells.
@@ -76,6 +90,11 @@ struct pl08x_channel_data {
  * platform, all inclusive, including multiplexed channels. The available
  * physical channels will be multiplexed around these signals as they are
  * requested, just enumerate all possible channels.
+ * @num_slave_channels: number of elements in the slave channel array
+ * @memcpy_burst_size: the appropriate burst size for memcpy operations
+ * @memcpy_bus_width: memory bus width
+ * @memcpy_prot_buff: whether memcpy DMA is bufferable
+ * @memcpy_prot_cache: whether memcpy DMA is cacheable
  * @get_xfer_signal: request a physical signal to be used for a DMA transfer
  * immediately: if there is some multiplexing or similar blocking the use
  * of the channel the transfer can be denied by returning less than zero,
@@ -90,7 +109,10 @@ struct pl08x_channel_data {
 struct pl08x_platform_data {
 	struct pl08x_channel_data *slave_channels;
 	unsigned int num_slave_channels;
-	struct pl08x_channel_data memcpy_channel;
+	enum pl08x_burst_size memcpy_burst_size;
+	enum pl08x_bus_width memcpy_bus_width;
+	bool memcpy_prot_buff;
+	bool memcpy_prot_cache;
 	int (*get_xfer_signal)(const struct pl08x_channel_data *);
 	void (*put_xfer_signal)(const struct pl08x_channel_data *, int);
 	u8 lli_buses;

include/linux/raid/pq.h

@@ -142,6 +142,7 @@ int raid6_select_algo(void);
 extern const u8 raid6_gfmul[256][256] __attribute__((aligned(256)));
 extern const u8 raid6_vgfmul[256][32] __attribute__((aligned(256)));
 extern const u8 raid6_gfexp[256]      __attribute__((aligned(256)));
+extern const u8 raid6_gflog[256]      __attribute__((aligned(256)));
 extern const u8 raid6_gfinv[256]      __attribute__((aligned(256)));
 extern const u8 raid6_gfexi[256]      __attribute__((aligned(256)));
 

lib/raid6/mktables.c

@@ -125,6 +125,26 @@ int main(int argc, char *argv[])
 	printf("EXPORT_SYMBOL(raid6_gfexp);\n");
 	printf("#endif\n");
 
+	/* Compute log-of-2 table */
+	printf("\nconst u8 __attribute__((aligned(256)))\n"
+	       "raid6_gflog[256] =\n" "{\n");
+	for (i = 0; i < 256; i += 8) {
+		printf("\t");
+		for (j = 0; j < 8; j++) {
+			v = 255;
+			for (k = 0; k < 256; k++)
+				if (exptbl[k] == (i + j)) {
+					v = k;
+					break;
+				}
+			printf("0x%02x,%c", v, (j == 7) ? '\n' : ' ');
+		}
+	}
+	printf("};\n");
+	printf("#ifdef __KERNEL__\n");
+	printf("EXPORT_SYMBOL(raid6_gflog);\n");
+	printf("#endif\n");
+
 	/* Compute inverse table x^-1 == x^254 */
 	printf("\nconst u8 __attribute__((aligned(256)))\n"
 	       "raid6_gfinv[256] =\n" "{\n");