misc/mei/hdcp: Fill transcoder index in port info

For gen12+ platform we need to pass the transcoder info
as part of the port info into ME FW.

This change fills the payload for ME FW from hdcp_port_data.

v2:
  Doc is enhanced for physical_port and attached_transcoder [Tomas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828164216.405-5-ramalingam.c@intel.com

drivers/misc/mei/hdcp/mei_hdcp.c

@@ -58,6 +58,7 @@ mei_hdcp_initiate_session(struct device *dev, struct hdcp_port_data *data,
 
 	session_init_in.port.integrated_port_type = data->port_type;
 	session_init_in.port.physical_port = (u8)data->fw_ddi;
+	session_init_in.port.attached_transcoder = (u8)data->fw_tc;
 	session_init_in.protocol = data->protocol;
 
 	byte = mei_cldev_send(cldev, (u8 *)&session_init_in,
@@ -127,6 +128,7 @@ mei_hdcp_verify_receiver_cert_prepare_km(struct device *dev,
 
 	verify_rxcert_in.port.integrated_port_type = data->port_type;
 	verify_rxcert_in.port.physical_port = (u8)data->fw_ddi;
+	verify_rxcert_in.port.attached_transcoder = (u8)data->fw_tc;
 
 	verify_rxcert_in.cert_rx = rx_cert->cert_rx;
 	memcpy(verify_rxcert_in.r_rx, &rx_cert->r_rx, HDCP_2_2_RRX_LEN);
@@ -197,6 +199,7 @@ mei_hdcp_verify_hprime(struct device *dev, struct hdcp_port_data *data,
 
 	send_hprime_in.port.integrated_port_type = data->port_type;
 	send_hprime_in.port.physical_port = (u8)data->fw_ddi;
+	send_hprime_in.port.attached_transcoder = (u8)data->fw_tc;
 
 	memcpy(send_hprime_in.h_prime, rx_hprime->h_prime,
 	       HDCP_2_2_H_PRIME_LEN);
@@ -254,6 +257,7 @@ mei_hdcp_store_pairing_info(struct device *dev, struct hdcp_port_data *data,
 
 	pairing_info_in.port.integrated_port_type = data->port_type;
 	pairing_info_in.port.physical_port = (u8)data->fw_ddi;
+	pairing_info_in.port.attached_transcoder = (u8)data->fw_tc;
 
 	memcpy(pairing_info_in.e_kh_km, pairing_info->e_kh_km,
 	       HDCP_2_2_E_KH_KM_LEN);
@@ -312,6 +316,7 @@ mei_hdcp_initiate_locality_check(struct device *dev,
 
 	lc_init_in.port.integrated_port_type = data->port_type;
 	lc_init_in.port.physical_port = (u8)data->fw_ddi;
+	lc_init_in.port.attached_transcoder = (u8)data->fw_tc;
 
 	byte = mei_cldev_send(cldev, (u8 *)&lc_init_in, sizeof(lc_init_in));
 	if (byte < 0) {
@@ -367,6 +372,7 @@ mei_hdcp_verify_lprime(struct device *dev, struct hdcp_port_data *data,
 
 	verify_lprime_in.port.integrated_port_type = data->port_type;
 	verify_lprime_in.port.physical_port = (u8)data->fw_ddi;
+	verify_lprime_in.port.attached_transcoder = (u8)data->fw_tc;
 
 	memcpy(verify_lprime_in.l_prime, rx_lprime->l_prime,
 	       HDCP_2_2_L_PRIME_LEN);
@@ -424,6 +430,7 @@ static int mei_hdcp_get_session_key(struct device *dev,
 
 	get_skey_in.port.integrated_port_type = data->port_type;
 	get_skey_in.port.physical_port = (u8)data->fw_ddi;
+	get_skey_in.port.attached_transcoder = (u8)data->fw_tc;
 
 	byte = mei_cldev_send(cldev, (u8 *)&get_skey_in, sizeof(get_skey_in));
 	if (byte < 0) {
@@ -488,6 +495,7 @@ mei_hdcp_repeater_check_flow_prepare_ack(struct device *dev,
 
 	verify_repeater_in.port.integrated_port_type = data->port_type;
 	verify_repeater_in.port.physical_port = (u8)data->fw_ddi;
+	verify_repeater_in.port.attached_transcoder = (u8)data->fw_tc;
 
 	memcpy(verify_repeater_in.rx_info, rep_topology->rx_info,
 	       HDCP_2_2_RXINFO_LEN);
@@ -558,6 +566,7 @@ static int mei_hdcp_verify_mprime(struct device *dev,
 
 	verify_mprime_in.port.integrated_port_type = data->port_type;
 	verify_mprime_in.port.physical_port = (u8)data->fw_ddi;
+	verify_mprime_in.port.attached_transcoder = (u8)data->fw_tc;
 
 	memcpy(verify_mprime_in.m_prime, stream_ready->m_prime,
 	       HDCP_2_2_MPRIME_LEN);
@@ -619,6 +628,7 @@ static int mei_hdcp_enable_authentication(struct device *dev,
 
 	enable_auth_in.port.integrated_port_type = data->port_type;
 	enable_auth_in.port.physical_port = (u8)data->fw_ddi;
+	enable_auth_in.port.attached_transcoder = (u8)data->fw_tc;
 	enable_auth_in.stream_type = data->streams[0].stream_type;
 
 	byte = mei_cldev_send(cldev, (u8 *)&enable_auth_in,
@@ -673,6 +683,7 @@ mei_hdcp_close_session(struct device *dev, struct hdcp_port_data *data)
 
 	session_close_in.port.integrated_port_type = data->port_type;
 	session_close_in.port.physical_port = (u8)data->fw_ddi;
+	session_close_in.port.attached_transcoder = (u8)data->fw_tc;
 
 	byte = mei_cldev_send(cldev, (u8 *)&session_close_in,
 			      sizeof(session_close_in));

drivers/misc/mei/hdcp/mei_hdcp.h

@@ -184,8 +184,11 @@ struct hdcp_cmd_no_data {
 /* Uniquely identifies the hdcp port being addressed for a given command. */
 struct hdcp_port_id {
 	u8	integrated_port_type;
+	/* physical_port is used until Gen11.5. Must be zero for Gen11.5+ */
 	u8	physical_port;
-	u16	reserved;
+	/* attached_transcoder is for Gen11.5+. Set to zero for <Gen11.5 */
+	u8	attached_transcoder;
+	u8	reserved;
 } __packed;
 
 /*