Commit 2e194583 authored by Benjamin Herrenschmidt's avatar Benjamin Herrenschmidt Committed by Paul Mackerras

[POWERPC] Cell interrupt rework

This patch reworks the cell iic interrupt handling so that:

 - Node ID is back in the interrupt number (only one IRQ host is created
for all nodes). This allows interrupts from sources on another node to
be routed non-locally. This will allow possibly one day to fix maxcpus=1
or 2 and still get interrupts from devices on BE 1. (A bit more fixing
is needed for that) and it will allow us to implement actual affinity
control of external interrupts.

 - Added handling of the IO exceptions interrupts (badly named, but I
re-used the name initially used by STI). Those are the interrupts
exposed by IIC_ISR and IIC_IRR, such as the IOC translation exception,
performance monitor, etc... Those get their special numbers in the IRQ
number space and are internally implemented as a cascade on unit 0xe,
class 1 of each node.
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: default avatarArnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: default avatarPaul Mackerras <paulus@samba.org>
parent f3c87a89
......@@ -21,6 +21,12 @@
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* TODO:
* - Fix various assumptions related to HW CPU numbers vs. linux CPU numbers
* vs node numbers in the setup code
* - Implement proper handling of maxcpus=1/2 (that is, routing of irqs from
* a non-active node to the active node)
*/
#include <linux/interrupt.h>
......@@ -44,24 +50,25 @@ struct iic {
u8 target_id;
u8 eoi_stack[16];
int eoi_ptr;
struct irq_host *host;
struct device_node *node;
};
static DEFINE_PER_CPU(struct iic, iic);
#define IIC_NODE_COUNT 2
static struct irq_host *iic_hosts[IIC_NODE_COUNT];
static struct irq_host *iic_host;
/* Convert between "pending" bits and hw irq number */
static irq_hw_number_t iic_pending_to_hwnum(struct cbe_iic_pending_bits bits)
{
unsigned char unit = bits.source & 0xf;
unsigned char node = bits.source >> 4;
unsigned char class = bits.class & 3;
/* Decode IPIs */
if (bits.flags & CBE_IIC_IRQ_IPI)
return IIC_IRQ_IPI0 | (bits.prio >> 4);
else if (bits.class <= 3)
return (bits.class << 4) | unit;
return IIC_IRQ_TYPE_IPI | (bits.prio >> 4);
else
return IIC_IRQ_INVALID;
return (node << IIC_IRQ_NODE_SHIFT) | (class << 4) | unit;
}
static void iic_mask(unsigned int irq)
......@@ -86,21 +93,70 @@ static struct irq_chip iic_chip = {
.eoi = iic_eoi,
};
static void iic_ioexc_eoi(unsigned int irq)
{
}
static void iic_ioexc_cascade(unsigned int irq, struct irq_desc *desc,
struct pt_regs *regs)
{
struct cbe_iic_regs *node_iic = desc->handler_data;
unsigned int base = (irq & 0xffffff00) | IIC_IRQ_TYPE_IOEXC;
unsigned long bits, ack;
int cascade;
for (;;) {
bits = in_be64(&node_iic->iic_is);
if (bits == 0)
break;
/* pre-ack edge interrupts */
ack = bits & IIC_ISR_EDGE_MASK;
if (ack)
out_be64(&node_iic->iic_is, ack);
/* handle them */
for (cascade = 63; cascade >= 0; cascade--)
if (bits & (0x8000000000000000UL >> cascade)) {
unsigned int cirq =
irq_linear_revmap(iic_host,
base | cascade);
if (cirq != NO_IRQ)
generic_handle_irq(cirq, regs);
}
/* post-ack level interrupts */
ack = bits & ~IIC_ISR_EDGE_MASK;
if (ack)
out_be64(&node_iic->iic_is, ack);
}
desc->chip->eoi(irq);
}
static struct irq_chip iic_ioexc_chip = {
.typename = " CELL-IOEX",
.mask = iic_mask,
.unmask = iic_unmask,
.eoi = iic_ioexc_eoi,
};
/* Get an IRQ number from the pending state register of the IIC */
static unsigned int iic_get_irq(struct pt_regs *regs)
{
struct cbe_iic_pending_bits pending;
struct iic *iic;
unsigned int virq;
iic = &__get_cpu_var(iic);
*(unsigned long *) &pending =
in_be64((unsigned long __iomem *) &iic->regs->pending_destr);
if (!(pending.flags & CBE_IIC_IRQ_VALID))
return NO_IRQ;
virq = irq_linear_revmap(iic_host, iic_pending_to_hwnum(pending));
if (virq == NO_IRQ)
return NO_IRQ;
iic->eoi_stack[++iic->eoi_ptr] = pending.prio;
BUG_ON(iic->eoi_ptr > 15);
if (pending.flags & CBE_IIC_IRQ_VALID)
return irq_linear_revmap(iic->host,
iic_pending_to_hwnum(pending));
return NO_IRQ;
return virq;
}
#ifdef CONFIG_SMP
......@@ -108,12 +164,7 @@ static unsigned int iic_get_irq(struct pt_regs *regs)
/* Use the highest interrupt priorities for IPI */
static inline int iic_ipi_to_irq(int ipi)
{
return IIC_IRQ_IPI0 + IIC_NUM_IPIS - 1 - ipi;
}
static inline int iic_irq_to_ipi(int irq)
{
return IIC_NUM_IPIS - 1 - (irq - IIC_IRQ_IPI0);
return IIC_IRQ_TYPE_IPI + 0xf - ipi;
}
void iic_setup_cpu(void)
......@@ -123,7 +174,7 @@ void iic_setup_cpu(void)
void iic_cause_IPI(int cpu, int mesg)
{
out_be64(&per_cpu(iic, cpu).regs->generate, (IIC_NUM_IPIS - 1 - mesg) << 4);
out_be64(&per_cpu(iic, cpu).regs->generate, (0xf - mesg) << 4);
}
u8 iic_get_target_id(int cpu)
......@@ -134,9 +185,7 @@ EXPORT_SYMBOL_GPL(iic_get_target_id);
struct irq_host *iic_get_irq_host(int node)
{
if (node < 0 || node >= IIC_NODE_COUNT)
return NULL;
return iic_hosts[node];
return iic_host;
}
EXPORT_SYMBOL_GPL(iic_get_irq_host);
......@@ -149,34 +198,20 @@ static irqreturn_t iic_ipi_action(int irq, void *dev_id, struct pt_regs *regs)
return IRQ_HANDLED;
}
static void iic_request_ipi(int ipi, const char *name)
{
int node, virq;
int virq;
for (node = 0; node < IIC_NODE_COUNT; node++) {
char *rname;
if (iic_hosts[node] == NULL)
continue;
virq = irq_create_mapping(iic_hosts[node],
iic_ipi_to_irq(ipi));
virq = irq_create_mapping(iic_host, iic_ipi_to_irq(ipi));
if (virq == NO_IRQ) {
printk(KERN_ERR
"iic: failed to map IPI %s on node %d\n",
name, node);
continue;
"iic: failed to map IPI %s\n", name);
return;
}
rname = kzalloc(strlen(name) + 16, GFP_KERNEL);
if (rname)
sprintf(rname, "%s node %d", name, node);
else
rname = (char *)name;
if (request_irq(virq, iic_ipi_action, IRQF_DISABLED,
rname, (void *)(long)ipi))
if (request_irq(virq, iic_ipi_action, IRQF_DISABLED, name,
(void *)(long)ipi))
printk(KERN_ERR
"iic: failed to request IPI %s on node %d\n",
name, node);
}
"iic: failed to request IPI %s\n", name);
}
void iic_request_IPIs(void)
......@@ -193,16 +228,24 @@ void iic_request_IPIs(void)
static int iic_host_match(struct irq_host *h, struct device_node *node)
{
return h->host_data != NULL && node == h->host_data;
return device_is_compatible(node,
"IBM,CBEA-Internal-Interrupt-Controller");
}
static int iic_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
if (hw < IIC_IRQ_IPI0)
set_irq_chip_and_handler(virq, &iic_chip, handle_fasteoi_irq);
else
switch (hw & IIC_IRQ_TYPE_MASK) {
case IIC_IRQ_TYPE_IPI:
set_irq_chip_and_handler(virq, &iic_chip, handle_percpu_irq);
break;
case IIC_IRQ_TYPE_IOEXC:
set_irq_chip_and_handler(virq, &iic_ioexc_chip,
handle_fasteoi_irq);
break;
default:
set_irq_chip_and_handler(virq, &iic_chip, handle_fasteoi_irq);
}
return 0;
}
......@@ -211,11 +254,39 @@ static int iic_host_xlate(struct irq_host *h, struct device_node *ct,
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
{
/* Currently, we don't translate anything. That needs to be fixed as
* we get better defined device-trees. iic interrupts have to be
* explicitely mapped by whoever needs them
*/
unsigned int node, ext, unit, class;
const u32 *val;
if (!device_is_compatible(ct,
"IBM,CBEA-Internal-Interrupt-Controller"))
return -ENODEV;
if (intsize != 1)
return -ENODEV;
val = get_property(ct, "#interrupt-cells", NULL);
if (val == NULL || *val != 1)
return -ENODEV;
node = intspec[0] >> 24;
ext = (intspec[0] >> 16) & 0xff;
class = (intspec[0] >> 8) & 0xff;
unit = intspec[0] & 0xff;
/* Check if node is in supported range */
if (node > 1)
return -EINVAL;
/* Build up interrupt number, special case for IO exceptions */
*out_hwirq = (node << IIC_IRQ_NODE_SHIFT);
if (unit == IIC_UNIT_IIC && class == 1)
*out_hwirq |= IIC_IRQ_TYPE_IOEXC | ext;
else
*out_hwirq |= IIC_IRQ_TYPE_NORMAL |
(class << IIC_IRQ_CLASS_SHIFT) | unit;
/* Dummy flags, ignored by iic code */
*out_flags = IRQ_TYPE_EDGE_RISING;
return 0;
}
static struct irq_host_ops iic_host_ops = {
......@@ -225,7 +296,7 @@ static struct irq_host_ops iic_host_ops = {
};
static void __init init_one_iic(unsigned int hw_cpu, unsigned long addr,
struct irq_host *host)
struct device_node *node)
{
/* XXX FIXME: should locate the linux CPU number from the HW cpu
* number properly. We are lucky for now
......@@ -237,19 +308,19 @@ static void __init init_one_iic(unsigned int hw_cpu, unsigned long addr,
iic->target_id = ((hw_cpu & 2) << 3) | ((hw_cpu & 1) ? 0xf : 0xe);
iic->eoi_stack[0] = 0xff;
iic->host = host;
iic->node = of_node_get(node);
out_be64(&iic->regs->prio, 0);
printk(KERN_INFO "IIC for CPU %d at %lx mapped to %p, target id 0x%x\n",
hw_cpu, addr, iic->regs, iic->target_id);
printk(KERN_INFO "IIC for CPU %d target id 0x%x : %s\n",
hw_cpu, iic->target_id, node->full_name);
}
static int __init setup_iic(void)
{
struct device_node *dn;
struct resource r0, r1;
struct irq_host *host;
int found = 0;
unsigned int node, cascade, found = 0;
struct cbe_iic_regs *node_iic;
const u32 *np;
for (dn = NULL;
......@@ -269,19 +340,33 @@ static int __init setup_iic(void)
of_node_put(dn);
return -ENODEV;
}
host = NULL;
if (found < IIC_NODE_COUNT) {
host = irq_alloc_host(IRQ_HOST_MAP_LINEAR,
IIC_SOURCE_COUNT,
&iic_host_ops,
IIC_IRQ_INVALID);
iic_hosts[found] = host;
BUG_ON(iic_hosts[found] == NULL);
iic_hosts[found]->host_data = of_node_get(dn);
found++;
}
init_one_iic(np[0], r0.start, host);
init_one_iic(np[1], r1.start, host);
init_one_iic(np[0], r0.start, dn);
init_one_iic(np[1], r1.start, dn);
/* Setup cascade for IO exceptions. XXX cleanup tricks to get
* node vs CPU etc...
* Note that we configure the IIC_IRR here with a hard coded
* priority of 1. We might want to improve that later.
*/
node = np[0] >> 1;
node_iic = cbe_get_cpu_iic_regs(np[0]);
cascade = node << IIC_IRQ_NODE_SHIFT;
cascade |= 1 << IIC_IRQ_CLASS_SHIFT;
cascade |= IIC_UNIT_IIC;
cascade = irq_create_mapping(iic_host, cascade);
if (cascade == NO_IRQ)
continue;
set_irq_data(cascade, node_iic);
set_irq_chained_handler(cascade , iic_ioexc_cascade);
out_be64(&node_iic->iic_ir,
(1 << 12) /* priority */ |
(node << 4) /* dest node */ |
IIC_UNIT_THREAD_0 /* route them to thread 0 */);
/* Flush pending (make sure it triggers if there is
* anything pending
*/
out_be64(&node_iic->iic_is, 0xfffffffffffffffful);
}
if (found)
......@@ -292,6 +377,12 @@ static int __init setup_iic(void)
void __init iic_init_IRQ(void)
{
/* Setup an irq host data structure */
iic_host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, IIC_SOURCE_COUNT,
&iic_host_ops, IIC_IRQ_INVALID);
BUG_ON(iic_host == NULL);
irq_set_default_host(iic_host);
/* Discover and initialize iics */
if (setup_iic() < 0)
panic("IIC: Failed to initialize !\n");
......
......@@ -2,48 +2,76 @@
#define ASM_CELL_PIC_H
#ifdef __KERNEL__
/*
* Mapping of IIC pending bits into per-node
* interrupt numbers.
* Mapping of IIC pending bits into per-node interrupt numbers.
*
* IRQ FF CC SS PP FF CC SS PP Description
* Interrupt numbers are in the range 0...0x1ff where the top bit
* (0x100) represent the source node. Only 2 nodes are supported with
* the current code though it's trivial to extend that if necessary using
* higher level bits
*
* 00-3f 80 02 +0 00 - 80 02 +0 3f South Bridge
* 00-3f 80 02 +b 00 - 80 02 +b 3f South Bridge
* 41-4a 80 00 +1 ** - 80 00 +a ** SPU Class 0
* 51-5a 80 01 +1 ** - 80 01 +a ** SPU Class 1
* 61-6a 80 02 +1 ** - 80 02 +a ** SPU Class 2
* 70-7f C0 ** ** 00 - C0 ** ** 0f IPI
* The bottom 8 bits are split into 2 type bits and 6 data bits that
* depend on the type:
*
* F flags
* C class
* S source
* P Priority
* + node number
* * don't care
* 00 (0x00 | data) : normal interrupt. data is (class << 4) | source
* 01 (0x40 | data) : IO exception. data is the exception number as
* defined by bit numbers in IIC_SR
* 10 (0x80 | data) : IPI. data is the IPI number (obtained from the priority)
* and node is always 0 (IPIs are per-cpu, their source is
* not relevant)
* 11 (0xc0 | data) : reserved
*
* A node consists of a Cell Broadband Engine and an optional
* south bridge device providing a maximum of 64 IRQs.
* The south bridge may be connected to either IOIF0
* or IOIF1.
* Each SPE is represented as three IRQ lines, one per
* interrupt class.
* 16 IRQ numbers are reserved for inter processor
* interruptions, although these are only used in the
* range of the first node.
* In addition, interrupt number 0x80000000 is defined as always invalid
* (that is the node field is expected to never extend to move than 23 bits)
*
* This scheme needs 128 IRQ numbers per BIF node ID,
* which means that with the total of 512 lines
* available, we can have a maximum of four nodes.
*/
enum {
IIC_IRQ_INVALID = 0xff,
IIC_IRQ_MAX = 0x3f,
IIC_IRQ_EXT_IOIF0 = 0x20,
IIC_IRQ_EXT_IOIF1 = 0x2b,
IIC_IRQ_IPI0 = 0x40,
IIC_NUM_IPIS = 0x10, /* IRQs reserved for IPI */
IIC_SOURCE_COUNT = 0x50,
IIC_IRQ_INVALID = 0x80000000u,
IIC_IRQ_NODE_MASK = 0x100,
IIC_IRQ_NODE_SHIFT = 8,
IIC_IRQ_MAX = 0x1ff,
IIC_IRQ_TYPE_MASK = 0xc0,
IIC_IRQ_TYPE_NORMAL = 0x00,
IIC_IRQ_TYPE_IOEXC = 0x40,
IIC_IRQ_TYPE_IPI = 0x80,
IIC_IRQ_CLASS_SHIFT = 4,
IIC_IRQ_CLASS_0 = 0x00,
IIC_IRQ_CLASS_1 = 0x10,
IIC_IRQ_CLASS_2 = 0x20,
IIC_SOURCE_COUNT = 0x200,
/* Here are defined the various source/dest units. Avoid using those
* definitions if you can, they are mostly here for reference
*/
IIC_UNIT_SPU_0 = 0x4,
IIC_UNIT_SPU_1 = 0x7,
IIC_UNIT_SPU_2 = 0x3,
IIC_UNIT_SPU_3 = 0x8,
IIC_UNIT_SPU_4 = 0x2,
IIC_UNIT_SPU_5 = 0x9,
IIC_UNIT_SPU_6 = 0x1,
IIC_UNIT_SPU_7 = 0xa,
IIC_UNIT_IOC_0 = 0x0,
IIC_UNIT_IOC_1 = 0xb,
IIC_UNIT_THREAD_0 = 0xe, /* target only */
IIC_UNIT_THREAD_1 = 0xf, /* target only */
IIC_UNIT_IIC = 0xe, /* source only (IO exceptions) */
/* Base numbers for the external interrupts */
IIC_IRQ_EXT_IOIF0 =
IIC_IRQ_TYPE_NORMAL | IIC_IRQ_CLASS_2 | IIC_UNIT_IOC_0,
IIC_IRQ_EXT_IOIF1 =
IIC_IRQ_TYPE_NORMAL | IIC_IRQ_CLASS_2 | IIC_UNIT_IOC_1,
/* Base numbers for the IIC_ISR interrupts */
IIC_IRQ_IOEX_TMI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 63,
IIC_IRQ_IOEX_PMI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 62,
IIC_IRQ_IOEX_ATI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 61,
IIC_IRQ_IOEX_MATBFI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 60,
IIC_IRQ_IOEX_ELDI = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 59,
/* Which bits in IIC_ISR are edge sensitive */
IIC_ISR_EDGE_MASK = 0x4ul,
};
extern void iic_init_IRQ(void);
......@@ -52,7 +80,6 @@ extern void iic_request_IPIs(void);
extern void iic_setup_cpu(void);
extern u8 iic_get_target_id(int cpu);
extern struct irq_host *iic_get_irq_host(int node);
extern void spider_init_IRQ(void);
......
......@@ -243,7 +243,6 @@ static unsigned int __init spider_find_cascade_and_node(struct spider_pic *pic)
const u32 *imap, *tmp;
int imaplen, intsize, unit;
struct device_node *iic;
struct irq_host *iic_host;
#if 0 /* Enable that when we have a way to retreive the node as well */
/* First, we check wether we have a real "interrupts" in the device
......@@ -289,11 +288,11 @@ static unsigned int __init spider_find_cascade_and_node(struct spider_pic *pic)
* the iic host from the iic OF node, but that way I'm still compatible
* with really really old old firmwares for which we don't have a node
*/
iic_host = iic_get_irq_host(pic->node_id);
if (iic_host == NULL)
return NO_IRQ;
/* Manufacture an IIC interrupt number of class 2 */
virq = irq_create_mapping(iic_host, 0x20 | unit);
virq = irq_create_mapping(NULL,
(pic->node_id << IIC_IRQ_NODE_SHIFT) |
(2 << IIC_IRQ_CLASS_SHIFT) |
unit);
if (virq == NO_IRQ)
printk(KERN_ERR "spider_pic: failed to map cascade !");
return virq;
......
......@@ -568,24 +568,23 @@ static void spu_unmap(struct spu *spu)
/* This function shall be abstracted for HV platforms */
static int __init spu_map_interrupts(struct spu *spu, struct device_node *np)
{
struct irq_host *host;
unsigned int isrc;
const u32 *tmp;
host = iic_get_irq_host(spu->node);
if (host == NULL)
return -ENODEV;
/* Get the interrupt source from the device-tree */
/* Get the interrupt source unit from the device-tree */
tmp = get_property(np, "isrc", NULL);
if (!tmp)
return -ENODEV;
spu->isrc = isrc = tmp[0];
isrc = tmp[0];
/* Add the node number */
isrc |= spu->node << IIC_IRQ_NODE_SHIFT;
spu->isrc = isrc;
/* Now map interrupts of all 3 classes */
spu->irqs[0] = irq_create_mapping(host, 0x00 | isrc);
spu->irqs[1] = irq_create_mapping(host, 0x10 | isrc);
spu->irqs[2] = irq_create_mapping(host, 0x20 | isrc);
spu->irqs[0] = irq_create_mapping(NULL, IIC_IRQ_CLASS_0 | isrc);
spu->irqs[1] = irq_create_mapping(NULL, IIC_IRQ_CLASS_1 | isrc);
spu->irqs[2] = irq_create_mapping(NULL, IIC_IRQ_CLASS_2 | isrc);
/* Right now, we only fail if class 2 failed */
return spu->irqs[2] == NO_IRQ ? -EINVAL : 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment