tcm_loop: bump max_sectors

There is not reason to artifically limit max_sectors in tcm_loop, set
it to UINT_MAX to allow stressing the large I/O handling in the target
core using the loopback driver.  Also remove various superflous defines
hiding the values set in the host template.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

drivers/target/loopback/tcm_loop.c

@@ -416,11 +416,11 @@ static struct scsi_host_template tcm_loop_driver_template = {
 	.queuecommand		= tcm_loop_queuecommand,
 	.change_queue_depth	= tcm_loop_change_queue_depth,
 	.eh_device_reset_handler = tcm_loop_device_reset,
-	.can_queue		= TL_SCSI_CAN_QUEUE,
+	.can_queue		= 1024,
 	.this_id		= -1,
-	.sg_tablesize		= TL_SCSI_SG_TABLESIZE,
-	.cmd_per_lun		= TL_SCSI_CMD_PER_LUN,
-	.max_sectors		= TL_SCSI_MAX_SECTORS,
+	.sg_tablesize		= 256,
+	.cmd_per_lun		= 1024,
+	.max_sectors		= 0xFFFF,
 	.use_clustering		= DISABLE_CLUSTERING,
 	.slave_alloc		= tcm_loop_slave_alloc,
 	.slave_configure	= tcm_loop_slave_configure,

drivers/target/loopback/tcm_loop.h

 #define TCM_LOOP_VERSION		"v2.1-rc1"
 #define TL_WWN_ADDR_LEN			256
 #define TL_TPGS_PER_HBA			32
-/*
- * Defaults for struct scsi_host_template tcm_loop_driver_template
- *
- * We use large can_queue and cmd_per_lun here and let TCM enforce
- * the underlying se_device_t->queue_depth.
- */
-#define TL_SCSI_CAN_QUEUE		1024
-#define TL_SCSI_CMD_PER_LUN		1024
-#define TL_SCSI_MAX_SECTORS		1024
-#define TL_SCSI_SG_TABLESIZE		256
+
 /*
  * Used in tcm_loop_driver_probe() for struct Scsi_Host->max_cmd_len
  */