Merge http://jfs.bkbits.net/linux-2.5

into home.osdl.org:/home/torvalds/v2.5/linux

arch/i386/kernel/cpu/cpufreq/gx-suspmod.c

@@ -28,30 +28,34 @@
  *	with 'Suspend Modulation OFF Count Register'
  *	and 'Suspend Modulation ON Count Register'.
  *	These registers are 8bit counters that represent the number of 
- *	32us intervals which the SUSP# pin is asserted/de-asserted to the 
- *	processor.
+ *	32us intervals which the SUSP# pin is asserted(ON)/de-asserted(OFF)
+ *	to the processor.
  *
  *	These counters define a ratio which is the effective frequency 
  * 	of operation of the system.
  *
- *			       On Count
+ *			       OFF Count
  *	F_eff = Fgx * ----------------------
- *	                On Count + Off Count
+ *	                OFF Count + ON Count
  *
  *	0 <= On Count, Off Count <= 255
  *
  *	From these limits, we can get register values 
  *
- *	on_duration + off_duration <= MAX_DURATION
- *	off_duration = on_duration * (stock_freq - freq) / freq
+ *	off_duration + on_duration <= MAX_DURATION
+ *	on_duration = off_duration * (stock_freq - freq) / freq
  *
- *      on_duration  =  (freq * DURATION) / stock_freq 
- *      off_duration = DURATION - on_duration 
+ *      off_duration  =  (freq * DURATION) / stock_freq 
+ *      on_duration = DURATION - off_duration 
  *
  *
  *---------------------------------------------------------------------------
  *
  * ChangeLog:
+ *  	Dec. 12, 2003	Hiroshi Miura <miura@da-cha.org>
+ *  		- fix on/off register mistake
+ *  		- fix cpu_khz calc when it stops cpu modulation.
+ *
  *	Dec. 11, 2002 	Hiroshi Miura <miura@da-cha.org>
  *		- rewrite for Cyrix MediaGX Cx5510/5520 and 
  *		  NatSemi Geode Cs5530(A).
@@ -233,13 +237,13 @@ static unsigned int gx_validate_speed(unsigned int khz, u8 *on_duration, u8 *off
 	int old_tmp_freq = stock_freq;
 	int tmp_freq;
 
-	*on_duration=1;
-	*off_duration=0;
+	*off_duration=1;
+	*on_duration=0;
 
 	for (i=max_duration; i>0; i--) {
-		tmp_on = ((khz * i) / stock_freq) & 0xff; 
-		tmp_off = i - tmp_on;
-		tmp_freq = (stock_freq * tmp_on) / i;
+		tmp_off = ((khz * i) / stock_freq) & 0xff; 
+		tmp_on = i - tmp_off;
+		tmp_freq = (stock_freq * tmp_off) / i;
 		/* if this relation is closer to khz, use this. If it's equal,
 		 * prefer it, too - lower latency */
 		if (abs(tmp_freq - khz) <= abs(old_tmp_freq - khz)) {
@@ -273,20 +277,10 @@ static void gx_set_cpuspeed(unsigned int khz)
 
 	freqs.new = new_khz;
 
-	if (new_khz == stock_freq) {  /* if new khz == 100% of CPU speed, it is special case */
-		local_irq_save(flags);
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-		pci_write_config_byte(gx_params->cs55x0, PCI_SUSCFG, (gx_params->pci_suscfg & ~(SUSMOD)));
-		pci_read_config_byte(gx_params->cs55x0, PCI_SUSCFG, &(gx_params->pci_suscfg));
-		local_irq_restore(flags);
-		dprintk("suspend modulation disabled: cpu runs 100 percent speed.\n");
-		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-		return;
-	}
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
 	local_irq_save(flags);
+
+	if (new_khz != stock_freq) {  /* if new khz == 100% of CPU speed, it is special case */
 		switch (gx_params->cs55x0->device) {
 		case PCI_DEVICE_ID_CYRIX_5530_LEGACY:
 			pmer1 = gx_params->pci_pmer1 | IRQ_SPDUP | VID_SPDUP;
@@ -304,12 +298,17 @@ static void gx_set_cpuspeed(unsigned int khz)
 		case PCI_DEVICE_ID_CYRIX_5520:
 		case PCI_DEVICE_ID_CYRIX_5510:
 			suscfg = gx_params->pci_suscfg | SUSMOD;
-		break;
 		default:
 			local_irq_restore(flags);
 			dprintk("fatal: try to set unknown chipset.\n");
 			return;
 		}
+	} else {
+		suscfg = gx_params->pci_suscfg & ~(SUSMOD);
+		gx_params->off_duration = 0;
+		gx_params->on_duration = 0;
+		dprintk("suspend modulation disabled: cpu runs 100 percent speed.\n");
+	}
 
 	pci_write_config_byte(gx_params->cs55x0, PCI_MODOFF, gx_params->off_duration);
 	pci_write_config_byte(gx_params->cs55x0, PCI_MODON, gx_params->on_duration);

arch/i386/kernel/cpu/cpufreq/p4-clockmod.c

@@ -246,7 +246,7 @@ static int cpufreq_p4_cpu_init(struct cpufreq_policy *policy)
 static int cpufreq_p4_cpu_exit(struct cpufreq_policy *policy)
 {
 	cpufreq_frequency_table_put_attr(policy->cpu);    
-	return cpufreq_p4_setdc(policy->cpu, DC_DISABLE);
+	return 0;
 }
 
 static struct freq_attr* p4clockmod_attr[] = {

arch/i386/kernel/cpu/cpufreq/powernow-k7.c

@@ -91,18 +91,13 @@ static int check_powernow(void)
 	struct cpuinfo_x86 *c = cpu_data;
 	unsigned int maxei, eax, ebx, ecx, edx;
 
-	if (c->x86_vendor != X86_VENDOR_AMD) {
-		printk (KERN_INFO PFX "AMD processor not detected.\n");
-		return 0;
-	}
-
-	if (c->x86 !=6) {
+	if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 !=6)) {
+#ifdef MODULE
 		printk (KERN_INFO PFX "This module only works with AMD K7 CPUs\n");
+#endif
 		return 0;
 	}
 
-	printk (KERN_INFO PFX "AMD K7 CPU detected.\n");
-
 	if ((c->x86_model == 6) && (c->x86_mask == 0)) {
 		printk (KERN_INFO PFX "K7 660[A0] core detected, enabling errata workarounds\n");
 		have_a0 = 1;

arch/i386/kernel/cpu/cpufreq/powernow-k8.h

@@ -120,7 +120,3 @@ struct pst_s {
 static inline int core_voltage_pre_transition(u32 reqvid);
 static inline int core_voltage_post_transition(u32 reqvid);
 static inline int core_frequency_transition(u32 reqfid);
-static int powernowk8_verify(struct cpufreq_policy *pol);
-static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq,
-		      unsigned relation);
-static int __init powernowk8_cpu_init(struct cpufreq_policy *pol);

arch/i386/kernel/cpu/cpufreq/speedstep-lib.c

@@ -207,17 +207,55 @@ unsigned int speedstep_detect_processor (void)
 		if (c->x86_model != 2)
 			return 0;
 
-		if ((c->x86_mask != 4) && /* B-stepping [M-P4-M] */
-			(c->x86_mask != 7) && /* C-stepping [M-P4-M] */
-			(c->x86_mask != 9))   /* D-stepping [M-P4-M or M-P4/533] */
-			return 0;
-
 		ebx = cpuid_ebx(0x00000001);
 		ebx &= 0x000000FF;
-		if ((ebx != 0x0e) && (ebx != 0x0f))
-			return 0;
 
+		dprintk(KERN_INFO "ebx value is %x, x86_mask is %x\n", ebx, c->86_mask);
+
+		switch (c->x86_mask) {
+		case 4: 
+			/*
+			 * B-stepping [M-P4-M] 
+			 * sample has ebx = 0x0f, production has 0x0e.
+			 */
+			if ((ebx == 0x0e) || (ebx == 0x0f))
+				return SPEEDSTEP_PROCESSOR_P4M;
+			break;
+		case 7: 
+			/*
+			 * C-stepping [M-P4-M]
+			 * needs to have ebx=0x0e, else it's a celeron:
+			 * cf. 25130917.pdf / page 7, footnote 5 even
+			 * though 25072120.pdf / page 7 doesn't say
+			 * samples are only of B-stepping...
+			 */
+			if (ebx == 0x0e)
 				return SPEEDSTEP_PROCESSOR_P4M;
+			break;
+		case 9:
+			/*
+			 * D-stepping [M-P4-M or M-P4/533]
+			 *
+			 * this is totally strange: CPUID 0x0F29 is
+			 * used by M-P4-M, M-P4/533 and(!) Celeron CPUs.
+			 * The latter need to be sorted out as they don't
+			 * support speedstep.
+			 * Celerons with CPUID 0x0F29 may have either
+			 * ebx=0x8 or 0xf -- 25130917.pdf doesn't say anything
+			 * specific.
+			 * M-P4-Ms may have either ebx=0xe or 0xf [see above]
+			 * M-P4/533 have either ebx=0xe or 0xf. [25317607.pdf]
+			 * So, how to distinguish all those processors with
+			 * ebx=0xf? I don't know. Sort them out, and wait
+			 * for someone to complain.
+			 */
+			if (ebx == 0x0e)
+				return SPEEDSTEP_PROCESSOR_P4M;
+			break;
+		default:
+			break;
+		}
+		return 0;
 	}
 
 	switch (c->x86_model) {

arch/i386/kernel/cpu/intel.c

@@ -296,12 +296,8 @@ static void __init init_intel(struct cpuinfo_x86 *c)
 		} else if (smp_num_siblings > 1 ) {
 			index_lsb = 0;
 			index_msb = 31;
-			/*
-			 * At this point we only support two siblings per
-			 * processor package.
-			 */
-#define NR_SIBLINGS	2
-			if (smp_num_siblings != NR_SIBLINGS) {
+
+			if (smp_num_siblings > NR_CPUS) {
 				printk(KERN_WARNING "CPU: Unsupported number of the siblings %d", smp_num_siblings);
 				smp_num_siblings = 1;
 				goto too_many_siblings;

drivers/cpufreq/cpufreq_userspace.c

@@ -2,7 +2,7 @@
  *  linux/drivers/cpufreq/cpufreq_userspace.c
  *
  *  Copyright (C)  2001 Russell King
- *            (C)  2002 - 2003 Dominik Brodowski <linux@brodo.de>
+ *            (C)  2002 - 2004 Dominik Brodowski <linux@brodo.de>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -112,7 +112,14 @@ int cpufreq_set(unsigned int freq, unsigned int cpu)
 	if (freq > cpu_max_freq[cpu])
 		freq = cpu_max_freq[cpu];
 
-	ret = cpufreq_driver_target(&current_policy[cpu], freq, 
+	/*
+	 * We're safe from concurrent calls to ->target() here
+	 * as we hold the userspace_sem lock. If we were calling
+	 * cpufreq_driver_target, a deadlock situation might occur:
+	 * A: cpufreq_set (lock userspace_sem) -> cpufreq_driver_target(lock policy->lock)
+	 * B: cpufreq_set_policy(lock policy->lock) -> __cpufreq_governor -> cpufreq_governor_userspace (lock userspace_sem)
+	 */
+	ret = __cpufreq_driver_target(&current_policy[cpu], freq, 
 	      CPUFREQ_RELATION_L);
 
  err:

fs/xfs/linux/xfs_iops.c

@@ -82,9 +82,14 @@ validate_fields(
 
 	va.va_mask = XFS_AT_NLINK|XFS_AT_SIZE|XFS_AT_NBLOCKS;
 	VOP_GETATTR(vp, &va, ATTR_LAZY, NULL, error);
+	if (likely(!error)) {
 		ip->i_nlink = va.va_nlink;
-	ip->i_size = va.va_size;
 		ip->i_blocks = va.va_nblocks;
+
+		/* we're under i_sem so i_size can't change under us */
+		if (i_size_read(ip) != va.va_size)
+			i_size_write(ip, va.va_size);
+	}
 }
 
 /*
@@ -536,6 +541,7 @@ linvfs_setattr(
 	if (error)
 		return(-error);	/* Positive error up from XFS */
 	if (ia_valid & ATTR_SIZE) {
+		i_size_write(inode, vattr.va_size);
 		error = vmtruncate(inode, attr->ia_size);
 	}
 

fs/xfs/linux/xfs_vnode.c

@@ -213,7 +213,6 @@ vn_revalidate(
 		inode->i_mtime	    = va.va_mtime;
 		inode->i_ctime	    = va.va_ctime;
 		inode->i_atime	    = va.va_atime;
-		i_size_write(inode, va.va_size);
 		if (va.va_xflags & XFS_XFLAG_IMMUTABLE)
 			inode->i_flags |= S_IMMUTABLE;
 		else