media: staging: fix several typos

Use codespell to fix lots of typos over frontends.

Manually verified to avoid false-positives.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

drivers/staging/media/davinci_vpfe/dm365_ipipe_hw.c

@@ -781,7 +781,7 @@ ipipe_set_3d_lut_regs(void __iomem *base_addr, void __iomem *isp5_base_addr,
 	if (!lut_3d->en)
 		return;
 
-	/* valied table */
+	/* valid table */
 	tbl = lut_3d->table;
 	for (i = 0; i < VPFE_IPIPE_MAX_SIZE_3D_LUT; i++) {
 		/*

drivers/staging/media/davinci_vpfe/dm365_isif.c

@@ -675,7 +675,7 @@ static void isif_config_bclamp(struct vpfe_isif_device *isif,
 	val = (bc->bc_mode_color & ISIF_BC_MODE_COLOR_MASK) <<
 		ISIF_BC_MODE_COLOR_SHIFT;
 
-	/* Enable BC and horizontal clamp calculation paramaters */
+	/* Enable BC and horizontal clamp calculation parameters */
 	val = val | 1 | ((bc->horz.mode & ISIF_HORZ_BC_MODE_MASK) <<
 	      ISIF_HORZ_BC_MODE_SHIFT);
 
@@ -712,7 +712,7 @@ static void isif_config_bclamp(struct vpfe_isif_device *isif,
 		isif_write(isif->isif_cfg.base_addr, val, CLHWIN2);
 	}
 
-	/* vertical clamp calculation paramaters */
+	/* vertical clamp calculation parameters */
 	/* OB H Valid */
 	val = bc->vert.ob_h_sz_calc & ISIF_VERT_BC_OB_H_SZ_MASK;
 

drivers/staging/media/davinci_vpfe/dm365_resizer.c

@@ -1284,7 +1284,7 @@ static int resizer_set_stream(struct v4l2_subdev *sd, int enable)
  * @cfg: V4L2 subdev pad config
  * @pad: pad number.
  * @which: wanted subdev format.
- * Retun wanted mbus frame format.
+ * Return wanted mbus frame format.
  */
 static struct v4l2_mbus_framefmt *
 __resizer_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg,
@@ -1785,7 +1785,7 @@ void vpfe_resizer_unregister_entities(struct vpfe_resizer_device *vpfe_rsz)
 
 /*
  * vpfe_resizer_register_entities() - Register entity
- * @resizer - pointer to resizer devive.
+ * @resizer - pointer to resizer device.
  * @vdev: pointer to v4l2 device structure.
  */
 int vpfe_resizer_register_entities(struct vpfe_resizer_device *resizer,

drivers/staging/media/davinci_vpfe/vpfe_mc_capture.c

@@ -528,7 +528,7 @@ static void vpfe_cleanup_modules(struct vpfe_device *vpfe_dev,
  * @vpfe_dev - ptr to vpfe capture device
  * @pdev - pointer to platform device
  *
- * intialize all v4l2 subdevs and media entities
+ * initialize all v4l2 subdevs and media entities
  */
 static int vpfe_initialize_modules(struct vpfe_device *vpfe_dev,
 				   struct platform_device *pdev)

drivers/staging/media/ipu3/include/intel-ipu3.h

@@ -432,11 +432,11 @@ struct ipu3_uapi_awb_fr_raw_buffer {
  *
  * @grid_cfg:	grid config, default 16x16.
  * @bayer_coeff:	1D Filter 1x11 center symmetry/anti-symmetry.
- *			coeffcients defaults { 0, 0, 0, 0, 0, 128 }.
+ *			coefficients defaults { 0, 0, 0, 0, 0, 128 }.
  *			Applied on whole image for each Bayer channel separately
  *			by a weighted sum of its 11x1 neighbors.
  * @reserved1:	reserved
- * @bayer_sign:	sign of filter coeffcients, default 0.
+ * @bayer_sign:	sign of filter coefficients, default 0.
  * @bayer_nf:	normalization factor for the convolution coeffs, to make sure
  *		total memory needed is within pre-determined range.
  *		NF should be the log2 of the sum of the abs values of the

drivers/staging/media/ipu3/ipu3-abi.h

@@ -1510,7 +1510,7 @@ struct imgu_abi_blob_info {
 					/* offset wrt hdr in bytes */
 	u32 prog_name_offset;		/* offset wrt hdr in bytes */
 	u32 size;			/* Size of blob */
-	u32 padding_size;		/* total cummulative of bytes added
+	u32 padding_size;		/* total cumulative of bytes added
 					 * due to section alignment
 					 */
 	u32 icache_source;		/* Position of icache in blob */

drivers/staging/media/ipu3/ipu3.h

@@ -146,7 +146,7 @@ struct imgu_device {
 	 * vid_buf.list and css->queue
 	 */
 	struct mutex lock;
-	/* Forbit streaming and buffer queuing during system suspend. */
+	/* Forbid streaming and buffer queuing during system suspend. */
 	atomic_t qbuf_barrier;
 	/* Indicate if system suspend take place while imgu is streaming. */
 	bool suspend_in_stream;

drivers/staging/media/omap4iss/iss_csi2.c

@@ -712,7 +712,7 @@ static void csi2_isr_ctx(struct iss_csi2_device *csi2,
 
 	/* Skip interrupts until we reach the frame skip count. The CSI2 will be
 	 * automatically disabled, as the frame skip count has been programmed
-	 * in the CSI2_CTx_CTRL1::COUNT field, so reenable it.
+	 * in the CSI2_CTx_CTRL1::COUNT field, so re-enable it.
 	 *
 	 * It would have been nice to rely on the FRAME_NUMBER interrupt instead
 	 * but it turned out that the interrupt is only generated when the CSI2

drivers/staging/media/soc_camera/soc_camera.c

@@ -4,11 +4,11 @@
  * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
  *
  * This driver provides an interface between platform-specific camera
- * busses and camera devices. It should be used if the camera is
+ * buses and camera devices. It should be used if the camera is
  * connected not over a "proper" bus like PCI or USB, but over a
  * special bus, like, for example, the Quick Capture interface on PXA270
  * SoCs. Later it should also be used for i.MX31 SoCs from Freescale.
- * It can handle multiple cameras and / or multiple busses, which can
+ * It can handle multiple cameras and / or multiple buses, which can
  * be used, e.g., in stereo-vision applications.
  *
  * This program is free software; you can redistribute it and/or modify

drivers/staging/media/zoran/zoran_card.c

@@ -1470,7 +1470,7 @@ static int __init zoran_init(void)
 		v4l_nbufs = 2;
 	if (v4l_nbufs > VIDEO_MAX_FRAME)
 		v4l_nbufs = VIDEO_MAX_FRAME;
-	/* The user specfies the in KB, we want them in byte
+	/* The user specifies the in KB, we want them in byte
 	 * (and page aligned) */
 	v4l_bufsize = PAGE_ALIGN(v4l_bufsize * 1024);
 	if (v4l_bufsize < 32768)

drivers/staging/media/zoran/zoran_device.c

@@ -612,7 +612,7 @@ zr36057_set_memgrab (struct zoran *zr,
 		zr->v4l_memgrab_active = 0;
 		zr->v4l_grab_frame = NO_GRAB_ACTIVE;
 
-		/* reenable grabbing to screen if it was running */
+		/* re-enable grabbing to screen if it was running */
 		if (zr->v4l_overlay_active) {
 			zr36057_overlay(zr, 1);
 		} else {