Documentation/serial: Delete obsolete driver documentation

These serial drivers were removed in kernel v3.1, so we can drop their
documentation files and references to their magic numbers and
parameters.

There are still references to these old drivers in
Documentation/devices.txt but I'm afraid they can't be removed.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Rob Landley <rob@landley.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/kernel-parameters.txt

@@ -804,13 +804,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	dhash_entries=	[KNL]
 			Set number of hash buckets for dentry cache.
 
-	digi=		[HW,SERIAL]
-			IO parameters + enable/disable command.
-
-	digiepca=	[HW,SERIAL]
-			See drivers/char/README.epca and
-			Documentation/serial/digiepca.txt.
-
 	disable=	[IPV6]
 			See Documentation/networking/ipv6.txt.
 
@@ -2939,9 +2932,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	rhash_entries=	[KNL,NET]
 			Set number of hash buckets for route cache
 
-	riscom8=	[HW,SERIAL]
-			Format: <io_board1>[,<io_board2>[,...<io_boardN>]]
-
 	ro		[KNL] Mount root device read-only on boot
 
 	root=		[KNL] Root filesystem
@@ -3083,9 +3073,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	sonypi.*=	[HW] Sony Programmable I/O Control Device driver
 			See Documentation/laptops/sonypi.txt
 
-	specialix=	[HW,SERIAL] Specialix multi-serial port adapter
-			See Documentation/serial/specialix.txt.
-
 	spia_io_base=	[HW,MTD]
 	spia_fio_base=
 	spia_pedr=

Documentation/magic-number.txt

@@ -63,8 +63,6 @@ Magic Name            Number      Structure            File
 PG_MAGIC              'P'         pg_{read,write}_hdr include/linux/pg.h
 CMAGIC                0x0111      user              include/linux/a.out.h
 MKISS_DRIVER_MAGIC    0x04bf      mkiss_channel     drivers/net/mkiss.h
-RISCOM8_MAGIC         0x0907      riscom_port       drivers/char/riscom8.h
-SPECIALIX_MAGIC       0x0907      specialix_port    drivers/char/specialix_io8.h
 HDLC_MAGIC            0x239e      n_hdlc            drivers/char/n_hdlc.c
 APM_BIOS_MAGIC        0x4101      apm_user          arch/x86/kernel/apm_32.c
 CYCLADES_MAGIC        0x4359      cyclades_port     include/linux/cyclades.h
@@ -82,7 +80,6 @@ STRIP_MAGIC           0x5303      strip             drivers/net/strip.c
 X25_ASY_MAGIC         0x5303      x25_asy           drivers/net/x25_asy.h
 SIXPACK_MAGIC         0x5304      sixpack           drivers/net/hamradio/6pack.h
 AX25_MAGIC            0x5316      ax_disp           drivers/net/mkiss.h
-ESP_MAGIC             0x53ee      esp_struct        drivers/char/esp.h
 TTY_MAGIC             0x5401      tty_struct        include/linux/tty.h
 MGSL_MAGIC            0x5401      mgsl_info         drivers/char/synclink.c
 TTY_DRIVER_MAGIC      0x5402      tty_driver        include/linux/tty_driver.h
@@ -94,13 +91,10 @@ USB_BLUETOOTH_MAGIC   0x6d02      usb_bluetooth     drivers/usb/class/bluetty.c
 RFCOMM_TTY_MAGIC      0x6d02                        net/bluetooth/rfcomm/tty.c
 USB_SERIAL_PORT_MAGIC 0x7301      usb_serial_port   drivers/usb/serial/usb-serial.h
 CG_MAGIC              0x00090255  ufs_cylinder_group include/linux/ufs_fs.h
-A2232_MAGIC           0x000a2232  gs_port           drivers/char/ser_a2232.h
 RPORT_MAGIC           0x00525001  r_port            drivers/char/rocket_int.h
 LSEMAGIC              0x05091998  lse               drivers/fc4/fc.c
 GDTIOCTL_MAGIC        0x06030f07  gdth_iowr_str     drivers/scsi/gdth_ioctl.h
 RIEBL_MAGIC           0x09051990                    drivers/net/atarilance.c
-RIO_MAGIC             0x12345678  gs_port           drivers/char/rio/rio_linux.c
-SX_MAGIC              0x12345678  gs_port           drivers/char/sx.h
 NBD_REQUEST_MAGIC     0x12560953  nbd_request       include/linux/nbd.h
 RED_MAGIC2            0x170fc2a5  (any)             mm/slab.c
 BAYCOM_MAGIC          0x19730510  baycom_state      drivers/net/baycom_epp.c
@@ -116,7 +110,6 @@ ISDN_ASYNC_MAGIC      0x49344C01  modem_info        include/linux/isdn.h
 CTC_ASYNC_MAGIC       0x49344C01  ctc_tty_info      drivers/s390/net/ctctty.c
 ISDN_NET_MAGIC        0x49344C02  isdn_net_local_s  drivers/isdn/i4l/isdn_net_lib.h
 SAVEKMSG_MAGIC2       0x4B4D5347  savekmsg          arch/*/amiga/config.c
-STLI_BOARDMAGIC       0x4bc6c825  stlibrd           include/linux/istallion.h
 CS_STATE_MAGIC        0x4c4f4749  cs_state          sound/oss/cs46xx.c
 SLAB_C_MAGIC          0x4f17a36d  kmem_cache        mm/slab.c
 COW_MAGIC             0x4f4f4f4d  cow_header_v1     arch/um/drivers/ubd_user.c
@@ -127,10 +120,8 @@ SCC_MAGIC             0x52696368  gs_port           drivers/char/scc.h
 SAVEKMSG_MAGIC1       0x53415645  savekmsg          arch/*/amiga/config.c
 GDA_MAGIC             0x58464552  gda               arch/mips/include/asm/sn/gda.h
 RED_MAGIC1            0x5a2cf071  (any)             mm/slab.c
-STL_PORTMAGIC         0x5a7182c9  stlport           include/linux/stallion.h
 EEPROM_MAGIC_VALUE    0x5ab478d2  lanai_dev         drivers/atm/lanai.c
 HDLCDRV_MAGIC         0x5ac6e778  hdlcdrv_state     include/linux/hdlcdrv.h
-EPCA_MAGIC            0x5c6df104  channel           include/linux/epca.h
 PCXX_MAGIC            0x5c6df104  channel           drivers/char/pcxx.h
 KV_MAGIC              0x5f4b565f  kernel_vars_s     arch/mips/include/asm/sn/klkernvars.h
 I810_STATE_MAGIC      0x63657373  i810_state        sound/oss/i810_audio.c
@@ -142,17 +133,14 @@ SLOT_MAGIC            0x67267322  slot              drivers/hotplug/acpiphp.h
 LO_MAGIC              0x68797548  nbd_device        include/linux/nbd.h
 OPROFILE_MAGIC        0x6f70726f  super_block       drivers/oprofile/oprofilefs.h
 M3_STATE_MAGIC        0x734d724d  m3_state          sound/oss/maestro3.c
-STL_PANELMAGIC        0x7ef621a1  stlpanel          include/linux/stallion.h
 VMALLOC_MAGIC         0x87654320  snd_alloc_track   sound/core/memory.c
 KMALLOC_MAGIC         0x87654321  snd_alloc_track   sound/core/memory.c
 PWC_MAGIC             0x89DC10AB  pwc_device        drivers/usb/media/pwc.h
 NBD_REPLY_MAGIC       0x96744668  nbd_reply         include/linux/nbd.h
-STL_BOARDMAGIC        0xa2267f52  stlbrd            include/linux/stallion.h
 ENI155_MAGIC          0xa54b872d  midway_eprom	    drivers/atm/eni.h
 SCI_MAGIC             0xbabeface  gs_port           drivers/char/sh-sci.h
 CODA_MAGIC            0xC0DAC0DA  coda_file_info    fs/coda/coda_fs_i.h
 DPMEM_MAGIC           0xc0ffee11  gdt_pci_sram      drivers/scsi/gdth.h
-STLI_PORTMAGIC        0xe671c7a1  stliport          include/linux/istallion.h
 YAM_MAGIC             0xF10A7654  yam_port          drivers/net/hamradio/yam.c
 CCB_MAGIC             0xf2691ad2  ccb               drivers/scsi/ncr53c8xx.c
 QUEUE_MAGIC_FREE      0xf7e1c9a3  queue_entry       drivers/scsi/arm/queue.c

Documentation/serial/00-INDEX

@@ -2,23 +2,15 @@
 	- this file.
 README.cycladesZ
 	- info on Cyclades-Z firmware loading.
-digiepca.txt
-	- info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards.
 driver
 	- intro to the low level serial driver.
 moxa-smartio
 	- file with info on installing/using Moxa multiport serial driver.
 n_gsm.txt
 	- GSM 0710 tty multiplexer howto.
-riscom8.txt
-	- notes on using the RISCom/8 multi-port serial driver.
 rocket.txt
 	- info on the Comtrol RocketPort multiport serial driver.
 serial-rs485.txt
 	- info about RS485 structures and support in the kernel.
-specialix.txt
-	- info on hardware/driver for specialix IO8+ multiport serial card.
-sx.txt
-	- info on the Specialix SX/SI multiport serial driver.
 tty.txt
 	- guide to the locking policies of the tty layer.

Documentation/serial/digiepca.txt

-NOTE:  This driver is obsolete.  Digi provides a 2.6 driver (dgdm) at
-http://www.digi.com for PCI cards.  They no longer maintain this driver,
-and have no 2.6 driver for ISA cards.
-
-This driver requires a number of user-space tools.  They can be acquired from
-http://www.digi.com, but only works with 2.4 kernels.
-
-
-The Digi Intl. epca driver. 
-----------------------------
-The Digi Intl. epca driver for Linux supports the following boards:
-
-Digi PC/Xem, PC/Xr, PC/Xe, PC/Xi, PC/Xeve 
-Digi EISA/Xem, PCI/Xem, PCI/Xr 
-
-Limitations:
-------------
-Currently the driver only autoprobes for supported PCI boards. 
-
-The Linux MAKEDEV command does not support generating the Digiboard
-Devices.  Users executing digiConfig to setup EISA and PC series cards
-will have their device nodes automatically constructed (cud?? for ~CLOCAL,
-and ttyD?? for CLOCAL).  Users wishing to boot their board from the LILO
-prompt, or those users booting PCI cards may use buildDIGI to construct 
-the necessary nodes. 
-
-Notes:
-------
-This driver may be configured via LILO.  For users who have already configured
-their driver using digiConfig, configuring from LILO will override previous 
-settings.  Multiple boards may be configured by issuing multiple LILO command 
-lines.  For examples see the bottom of this document.
-
-Device names start at 0 and continue up.  Beware of this as previous Digi 
-drivers started device names with 1.
-
-PCI boards are auto-detected and configured by the driver.  PCI boards will
-be allocated device numbers (internally) beginning with the lowest PCI slot
-first.  In other words a PCI card in slot 3 will always have higher device
-nodes than a PCI card in slot 1. 
-
-LILO config examples:
----------------------
-Using LILO's APPEND command, a string of comma separated identifiers or 
-integers can be used to configure supported boards.  The six values in order 
-are:
-
-   Enable/Disable this card or Override,
-   Type of card: PC/Xe (AccelePort) (0), PC/Xeve (1), PC/Xem or PC/Xr (2), 
-                 EISA/Xem (3), PC/64Xe (4), PC/Xi (5), 
-   Enable/Disable alternate pin arrangement,
-   Number of ports on this card,
-   I/O Port where card is configured (in HEX if using string identifiers),
-   Base of memory window (in HEX if using string identifiers), 
-
-NOTE : PCI boards are auto-detected and configured.  Do not attempt to 
-configure PCI boards with the LILO append command.  If you wish to override
-previous configuration data (As set by digiConfig), but you do not wish to
-configure any specific card (Example if there are PCI cards in the system) 
-the following override command will accomplish this:
--> append="digi=2"
-
-Samples:
-   append="digiepca=E,PC/Xe,D,16,200,D0000"
-                  or
-   append="digi=1,0,0,16,512,851968"
-
-Supporting Tools:
------------------
-Supporting tools include digiDload, digiConfig, buildPCI, and ditty.  See
-drivers/char/README.epca for more details.  Note,
-this driver REQUIRES that digiDload be executed prior to it being used. 
-Failure to do this will result in an ENODEV error.
-
-Documentation:
---------------
-Complete documentation for this product may be found in the tool package. 
-
-Sources of information and support:
------------------------------------
-Digi Intl. support site for this product:
-
-->  http://www.digi.com
-
-Acknowledgments:
-----------------
-Much of this work (And even text) was derived from a similar document 
-supporting the original public domain DigiBoard driver Copyright (C)
-1994,1995 Troy De Jongh.  Many thanks to Christoph Lameter 
-(christoph@lameter.com) and Mike McLagan (mike.mclagan@linux.org) who authored 
-and contributed to the original document. 
-
-Changelog:
-----------
-10-29-04:	Update status of driver, remove dead links in document
-		James Nelson <james4765@gmail.com>
-
-2000 (?)	Original Document

Documentation/serial/riscom8.txt

-* NOTE - this is an unmaintained driver.  The original author cannot be located.
-
-SDL Communications is now SBS Technologies, and does not have any
-information on these ancient ISA cards on their website.
-
-James Nelson <james4765@gmail.com> - 12-12-2004
-
-	This is the README for RISCom/8 multi-port serial driver
-	(C) 1994-1996 D.Gorodchanin
-	See file LICENSE for terms and conditions.
-
-NOTE: English is not my native language. 
-      I'm sorry for any mistakes in this text.
-
-Misc. notes for RISCom/8 serial driver, in no particular order :)
-
-1) This driver can support up to 4 boards at time.
-   Use string "riscom8=0xXXX,0xXXX,0xXXX,0xXXX" at LILO prompt, for
-   setting I/O base addresses for boards. If you compile driver
-   as module use modprobe options "iobase=0xXXX iobase1=0xXXX iobase2=..."
-
-2) The driver partially supports famous 'setserial' program, you can use almost
-   any of its options, excluding port & irq settings.
-
-3) There are some misc. defines at the beginning of riscom8.c, please read the 
-   comments and try to change some of them in case of problems.
-
-4) I consider the current state of the driver as BETA.
-
-5) SDL Communications WWW page is http://www.sdlcomm.com.
-
-6) You can use the MAKEDEV program to create RISCom/8 /dev/ttyL* entries.
-
-7) Minor numbers for first board are 0-7, for second 8-15, etc.
-
-22 Apr 1996.

Documentation/zh_CN/magic-number.txt

@@ -63,8 +63,6 @@ struct tty_ldisc {
 PG_MAGIC              'P'         pg_{read,write}_hdr include/linux/pg.h
 CMAGIC                0x0111      user              include/linux/a.out.h
 MKISS_DRIVER_MAGIC    0x04bf      mkiss_channel     drivers/net/mkiss.h
-RISCOM8_MAGIC         0x0907      riscom_port       drivers/char/riscom8.h
-SPECIALIX_MAGIC       0x0907      specialix_port    drivers/char/specialix_io8.h
 HDLC_MAGIC            0x239e      n_hdlc            drivers/char/n_hdlc.c
 APM_BIOS_MAGIC        0x4101      apm_user          arch/x86/kernel/apm_32.c
 CYCLADES_MAGIC        0x4359      cyclades_port     include/linux/cyclades.h
@@ -82,7 +80,6 @@ STRIP_MAGIC           0x5303      strip             drivers/net/strip.c
 X25_ASY_MAGIC         0x5303      x25_asy           drivers/net/x25_asy.h
 SIXPACK_MAGIC         0x5304      sixpack           drivers/net/hamradio/6pack.h
 AX25_MAGIC            0x5316      ax_disp           drivers/net/mkiss.h
-ESP_MAGIC             0x53ee      esp_struct        drivers/char/esp.h
 TTY_MAGIC             0x5401      tty_struct        include/linux/tty.h
 MGSL_MAGIC            0x5401      mgsl_info         drivers/char/synclink.c
 TTY_DRIVER_MAGIC      0x5402      tty_driver        include/linux/tty_driver.h
@@ -94,13 +91,10 @@ USB_BLUETOOTH_MAGIC   0x6d02      usb_bluetooth     drivers/usb/class/bluetty.c
 RFCOMM_TTY_MAGIC      0x6d02                        net/bluetooth/rfcomm/tty.c
 USB_SERIAL_PORT_MAGIC 0x7301      usb_serial_port   drivers/usb/serial/usb-serial.h
 CG_MAGIC              0x00090255  ufs_cylinder_group include/linux/ufs_fs.h
-A2232_MAGIC           0x000a2232  gs_port           drivers/char/ser_a2232.h
 RPORT_MAGIC           0x00525001  r_port            drivers/char/rocket_int.h
 LSEMAGIC              0x05091998  lse               drivers/fc4/fc.c
 GDTIOCTL_MAGIC        0x06030f07  gdth_iowr_str     drivers/scsi/gdth_ioctl.h
 RIEBL_MAGIC           0x09051990                    drivers/net/atarilance.c
-RIO_MAGIC             0x12345678  gs_port           drivers/char/rio/rio_linux.c
-SX_MAGIC              0x12345678  gs_port           drivers/char/sx.h
 NBD_REQUEST_MAGIC     0x12560953  nbd_request       include/linux/nbd.h
 RED_MAGIC2            0x170fc2a5  (any)             mm/slab.c
 BAYCOM_MAGIC          0x19730510  baycom_state      drivers/net/baycom_epp.c
@@ -116,7 +110,6 @@ ISDN_ASYNC_MAGIC      0x49344C01  modem_info        include/linux/isdn.h
 CTC_ASYNC_MAGIC       0x49344C01  ctc_tty_info      drivers/s390/net/ctctty.c
 ISDN_NET_MAGIC        0x49344C02  isdn_net_local_s  drivers/isdn/i4l/isdn_net_lib.h
 SAVEKMSG_MAGIC2       0x4B4D5347  savekmsg          arch/*/amiga/config.c
-STLI_BOARDMAGIC       0x4bc6c825  stlibrd           include/linux/istallion.h
 CS_STATE_MAGIC        0x4c4f4749  cs_state          sound/oss/cs46xx.c
 SLAB_C_MAGIC          0x4f17a36d  kmem_cache        mm/slab.c
 COW_MAGIC             0x4f4f4f4d  cow_header_v1     arch/um/drivers/ubd_user.c
@@ -127,10 +120,8 @@ SCC_MAGIC             0x52696368  gs_port           drivers/char/scc.h
 SAVEKMSG_MAGIC1       0x53415645  savekmsg          arch/*/amiga/config.c
 GDA_MAGIC             0x58464552  gda               arch/mips/include/asm/sn/gda.h
 RED_MAGIC1            0x5a2cf071  (any)             mm/slab.c
-STL_PORTMAGIC         0x5a7182c9  stlport           include/linux/stallion.h
 EEPROM_MAGIC_VALUE    0x5ab478d2  lanai_dev         drivers/atm/lanai.c
 HDLCDRV_MAGIC         0x5ac6e778  hdlcdrv_state     include/linux/hdlcdrv.h
-EPCA_MAGIC            0x5c6df104  channel           include/linux/epca.h
 PCXX_MAGIC            0x5c6df104  channel           drivers/char/pcxx.h
 KV_MAGIC              0x5f4b565f  kernel_vars_s     arch/mips/include/asm/sn/klkernvars.h
 I810_STATE_MAGIC      0x63657373  i810_state        sound/oss/i810_audio.c
@@ -142,17 +133,14 @@ SLOT_MAGIC            0x67267322  slot              drivers/hotplug/acpiphp.h
 LO_MAGIC              0x68797548  nbd_device        include/linux/nbd.h
 OPROFILE_MAGIC        0x6f70726f  super_block       drivers/oprofile/oprofilefs.h
 M3_STATE_MAGIC        0x734d724d  m3_state          sound/oss/maestro3.c
-STL_PANELMAGIC        0x7ef621a1  stlpanel          include/linux/stallion.h
 VMALLOC_MAGIC         0x87654320  snd_alloc_track   sound/core/memory.c
 KMALLOC_MAGIC         0x87654321  snd_alloc_track   sound/core/memory.c
 PWC_MAGIC             0x89DC10AB  pwc_device        drivers/usb/media/pwc.h
 NBD_REPLY_MAGIC       0x96744668  nbd_reply         include/linux/nbd.h
-STL_BOARDMAGIC        0xa2267f52  stlbrd            include/linux/stallion.h
 ENI155_MAGIC          0xa54b872d  midway_eprom	    drivers/atm/eni.h
 SCI_MAGIC             0xbabeface  gs_port           drivers/char/sh-sci.h
 CODA_MAGIC            0xC0DAC0DA  coda_file_info    include/linux/coda_fs_i.h
 DPMEM_MAGIC           0xc0ffee11  gdt_pci_sram      drivers/scsi/gdth.h
-STLI_PORTMAGIC        0xe671c7a1  stliport          include/linux/istallion.h
 YAM_MAGIC             0xF10A7654  yam_port          drivers/net/hamradio/yam.c
 CCB_MAGIC             0xf2691ad2  ccb               drivers/scsi/ncr53c8xx.c
 QUEUE_MAGIC_FREE      0xf7e1c9a3  queue_entry       drivers/scsi/arm/queue.c

firmware/WHENCE

@@ -273,16 +273,6 @@ Converted from Intel HEX files, used in our binary representation of ihex.
 
 --------------------------------------------------------------------------
 
-Driver: ip2 -- Computone IntelliPort Plus serial device
-
-File: intelliport2.bin
-
-Licence: Unknown
-
-Found in hex form in kernel source.
-
---------------------------------------------------------------------------
-
 Driver: CPiA2 -- cameras based on Vision's CPiA2
 
 File: cpia2/stv0672_vp4.bin