Skip to content

L
linux
Commit 305e0b2a authored by Roger Shimizu's avatar Roger Shimizu Committed by Gregory CLEMENT
Browse files
Options

ARM: dts: orion5x: split linkstation lswtgl into common and device parts 

In order to support more linkstation devices, common part of current
.dts file goes into .dtsi file. Some .dtsi start with "mvebu-" prefix
because other kirkwood based linkstation devices are similar, and
will be migrated to use these .dtsi some time later.
  - orion5x-linkstation.dtsi
  - mvebu-linkstation-fan.dtsi
  - mvebu-linkstation-gpio-simple.dtsi
while all rest part remains in device specific .dts file:
  - orion5x-linkstation-lswtgl.dts
Signed-off-by: default avatarRoger Shimizu <rogershimizu@gmail.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
parent 34d48290
Show whitespace changes
Inline Side-by-side
Showing with 402 additions and 198 deletions
arch/arm/boot/dts/mvebu-linkstation-fan.dtsi 0 → 100644
View file @ 305e0b2a
/*
* Device Tree common file for gpio-fan on Buffalo Linkstation
*
* Copyright (C) 2015, 2016
* Roger Shimizu <rogershimizu@gmail.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/ {
gpio_fan {
compatible = "gpio-fan";
pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
pinctrl-names = "default";
gpio-fan,speed-map =
<0 3
1500 2
3250 1
5000 0>;
};
};
&pinctrl {
pmx_fan_low: pmx-fan-low {
marvell,function = "gpio";
};
pmx_fan_high: pmx-fan-high {
marvell,function = "gpio";
};
pmx_fan_lock: pmx-fan-lock {
marvell,function = "gpio";
};
};
arch/arm/boot/dts/mvebu-linkstation-gpio-simple.dtsi 0 → 100644
View file @ 305e0b2a
/*
* Device Tree common file for gpio-{keys,leds} on Buffalo Linkstation
*
* Copyright (C) 2015, 2016
* Roger Shimizu <rogershimizu@gmail.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/input/input.h>
/ {
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_power_switch>;
pinctrl-names = "default";
power-on-switch {
label = "Power-on Switch";
linux,code = <KEY_RESERVED>;
linux,input-type = <5>;
};
power-auto-switch {
label = "Power-auto Switch";
linux,code = <KEY_ESC>;
linux,input-type = <5>;
};
};
gpio_leds {
compatible = "gpio-leds";
pinctrl-0 = <&pmx_led_power &pmx_led_alarm &pmx_led_info>;
pinctrl-names = "default";
blue-power-led {
label = "linkstation:blue:power";
default-state = "keep";
};
red-alarm-led {
label = "linkstation:red:alarm";
};
amber-info-led {
label = "linkstation:amber:info";
};
};
};
&pinctrl {
pmx_power_switch: pmx-power-switch {
marvell,function = "gpio";
};
pmx_led_power: pmx-leds {
marvell,function = "gpio";
};
pmx_led_alarm: pmx-leds {
marvell,function = "gpio";
};
pmx_led_info: pmx-leds {
marvell,function = "gpio";
};
};
arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
View file @ 305e0b2a
...@@ -45,9 +45,10 @@ ...@@ -45,9 +45,10 @@
/dts-v1/; /dts-v1/;
#include "orion5x-linkstation.dtsi"
#include "mvebu-linkstation-gpio-simple.dtsi"
#include "mvebu-linkstation-fan.dtsi"
#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "orion5x-mv88f5182.dtsi"
/ { / {
model = "Buffalo Linkstation LS-WTGL"; model = "Buffalo Linkstation LS-WTGL";
...@@ -58,247 +59,93 @@ memory { /* 64 MB */ ...@@ -58,247 +59,93 @@ memory { /* 64 MB */
reg = <0x00000000 0x4000000>; reg = <0x00000000 0x4000000>;
}; };
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
linux,stdout-path = &uart0;
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
<MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
<MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>;
internal-regs {
pinctrl: pinctrl@10000 {
pinctrl-names = "default";
pmx_led_power: pmx-leds {
marvell,pins = "mpp0";
marvell,function = "gpio";
};
pmx_led_alarm: pmx-leds {
marvell,pins = "mpp2";
marvell,function = "gpio";
};
pmx_led_info: pmx-leds {
marvell,pins = "mpp3";
marvell,function = "gpio";
};
pmx_power_hdd: pmx-power-hdd {
marvell,pins = "mpp1";
marvell,function = "gpio";
};
pmx_usb_power: pmx-usb-power {
marvell,pins = "mpp9";
marvell,function = "gpio";
};
pmx_sata0: pmx-sata0 {
marvell,pins = "mpp12";
marvell,function = "sata0";
};
pmx_sata1: pmx-sata1 {
marvell,pins = "mpp13";
marvell,function = "sata1";
};
pmx_fan_high: pmx-fan-high {
marvell,pins = "mpp14";
marvell,function = "gpio";
};
pmx_fan_low: pmx-fan-low {
marvell,pins = "mpp17";
marvell,function = "gpio";
};
pmx_fan_lock: pmx-fan-lock {
marvell,pins = "mpp6";
marvell,function = "gpio";
};
pmx_power_switch: pmx-power-switch {
marvell,pins = "mpp8", "mpp10";
marvell,function = "gpio";
};
};
};
};
gpio_keys { gpio_keys {
compatible = "gpio-keys"; power-on-switch {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_power_switch>;
pinctrl-names = "default";
button@1 {
label = "Power-on Switch";
linux,code = <KEY_RESERVED>;
linux,input-type = <5>;
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
}; };
button@2 { power-auto-switch {
label = "Power-auto Switch";
linux,code = <KEY_ESC>;
linux,input-type = <5>;
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
}; };
}; };
gpio_leds { gpio_leds {
compatible = "gpio-leds"; blue-power-led {
pinctrl-0 = <&pmx_led_power &pmx_led_alarm
&pmx_led_info>;
pinctrl-names = "default";
led@1 {
label = "lswtgl:blue:power";
gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
default-state = "keep";
}; };
led@2 { red-alarm-led {
label = "lswtgl:red:alarm";
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
}; };
led@3 { amber-info-led {
label = "lswtgl:amber:info";
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
}; };
}; };
gpio_fan { gpio_fan {
compatible = "gpio-fan";
pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
pinctrl-names = "default";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW gpios = <&gpio0 14 GPIO_ACTIVE_LOW
&gpio0 17 GPIO_ACTIVE_LOW>; &gpio0 17 GPIO_ACTIVE_LOW>;
gpio-fan,speed-map = <0 3
1500 2
3250 1
5000 0>;
alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
}; };
};
restart_poweroff { &pinctrl {
compatible = "restart-poweroff"; pmx_led_power: pmx-leds {
marvell,pins = "mpp0";
marvell,function = "gpio";
}; };
regulators { pmx_power_hdd: pmx-power-hdd {
compatible = "simple-bus"; marvell,pins = "mpp1";
#address-cells = <1>; marvell,function = "gpio";
#size-cells = <0>;
pinctrl-0 = <&pmx_power_hdd &pmx_usb_power>;
pinctrl-names = "default";
usb_power: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "USB Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
}; };
hdd_power: regulator@2 { pmx_led_alarm: pmx-leds {
compatible = "regulator-fixed"; marvell,pins = "mpp2";
reg = <2>; marvell,function = "gpio";
regulator-name = "HDD Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
};
}; };
};
&devbus_bootcs {
status = "okay";
devbus,keep-config;
flash@0 { pmx_led_info: pmx-leds {
compatible = "jedec-flash"; marvell,pins = "mpp3";
reg = <0 0x40000>; marvell,function = "gpio";
bank-width = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
header@0 {
reg = <0 0x30000>;
read-only;
}; };
uboot@30000 { pmx_fan_lock: pmx-fan-lock {
reg = <0x30000 0xF000>; marvell,pins = "mpp6";
read-only; marvell,function = "gpio";
}; };
uboot_env@3F000 { pmx_power_switch: pmx-power-switch {
reg = <0x3F000 0x1000>; marvell,pins = "mpp8", "mpp10";
}; marvell,function = "gpio";
};
}; };
};
&mdio {
status = "okay";
ethphy: ethernet-phy { pmx_power_usb: pmx-power-usb {
reg = <8>; marvell,pins = "mpp9";
marvell,function = "gpio";
}; };
};
&eth {
status = "okay";
ethernet-port@0 { pmx_fan_high: pmx-fan-high {
phy-handle = <&ethphy>; marvell,pins = "mpp14";
marvell,function = "gpio";
}; };
};
&ehci0 { pmx_fan_low: pmx-fan-low {
status = "okay"; marvell,pins = "mpp17";
marvell,function = "gpio";
};
}; };
&i2c { &hdd_power {
status = "okay"; gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
rtc {
compatible = "ricoh,rs5c372a";
reg = <0x32>;
};
}; };
&wdt { &usb_power {
status = "disabled"; gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
}; };
&sata { &sata {
pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
pinctrl-names = "default";
status = "okay";
nr-ports = <2>; nr-ports = <2>;
}; };
&uart0 {
status = "okay";
};
arch/arm/boot/dts/orion5x-linkstation.dtsi 0 → 100644
View file @ 305e0b2a
/*
* Device Tree common file for orion5x based Buffalo Linkstation
*
* Copyright (C) 2015, 2016
* Roger Shimizu <rogershimizu@gmail.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "orion5x-mv88f5182.dtsi"
/ {
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
linux,stdout-path = &uart0;
};
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
<MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
<MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>;
};
restart_poweroff {
compatible = "restart-poweroff";
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_power_usb &pmx_power_hdd>;
pinctrl-names = "default";
usb_power: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "USB Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
};
hdd_power: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "HDD Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
};
};
};
&pinctrl {
pmx_power_hdd: pmx-power-hdd {
marvell,function = "gpio";
};
pmx_power_usb: pmx-power-usb {
marvell,function = "gpio";
};
};
&devbus_bootcs {
status = "okay";
devbus,keep-config;
flash@0 {
compatible = "jedec-flash";
reg = <0 0x40000>;
bank-width = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
header@0 {
reg = <0 0x30000>;
read-only;
};
uboot@30000 {
reg = <0x30000 0xF000>;
read-only;
};
uboot_env@3F000 {
reg = <0x3F000 0x1000>;
};
};
};
};
&mdio {
status = "okay";
ethphy: ethernet-phy {
reg = <8>;
};
};
&eth {
status = "okay";
ethernet-port@0 {
phy-handle = <&ethphy>;
};
};
&ehci0 {
status = "okay";
};
&i2c {
status = "okay";
rtc {
compatible = "ricoh,rs5c372a";
reg = <0x32>;
};
};
&wdt {
status = "disabled";
};
&sata {
status = "okay";
nr-ports = <1>;
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7