Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pyll hwmon fixes from Guenter Roeck:
 "Two patches: Fix build warning in ads1015 driver, and fix bogus power
  values with current BIOSes in fam15h_power driver."

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (ads1015) Fix build warning
  hwmon: fam15h_power: fix bogus values with current BIOSes

drivers/hwmon/ads1015.c

@@ -59,14 +59,11 @@ struct ads1015_data {
 	struct ads1015_channel_data channel_data[ADS1015_CHANNELS];
 };
 
-static int ads1015_read_value(struct i2c_client *client, unsigned int channel,
-			      int *value)
+static int ads1015_read_adc(struct i2c_client *client, unsigned int channel)
 {
 	u16 config;
-	s16 conversion;
 	struct ads1015_data *data = i2c_get_clientdata(client);
 	unsigned int pga = data->channel_data[channel].pga;
-	int fullscale;
 	unsigned int data_rate = data->channel_data[channel].data_rate;
 	unsigned int conversion_time_ms;
 	int res;
@@ -78,7 +75,6 @@ static int ads1015_read_value(struct i2c_client *client, unsigned int channel,
 	if (res < 0)
 		goto err_unlock;
 	config = res;
-	fullscale = fullscale_table[pga];
 	conversion_time_ms = DIV_ROUND_UP(1000, data_rate_table[data_rate]);
 
 	/* setup and start single conversion */
@@ -105,33 +101,36 @@ static int ads1015_read_value(struct i2c_client *client, unsigned int channel,
 	}
 
 	res = i2c_smbus_read_word_swapped(client, ADS1015_CONVERSION);
-	if (res < 0)
-		goto err_unlock;
-	conversion = res;
-
-	mutex_unlock(&data->update_lock);
-
-	*value = DIV_ROUND_CLOSEST(conversion * fullscale, 0x7ff0);
-
-	return 0;
 
 err_unlock:
 	mutex_unlock(&data->update_lock);
 	return res;
 }
 
+static int ads1015_reg_to_mv(struct i2c_client *client, unsigned int channel,
+			     s16 reg)
+{
+	struct ads1015_data *data = i2c_get_clientdata(client);
+	unsigned int pga = data->channel_data[channel].pga;
+	int fullscale = fullscale_table[pga];
+
+	return DIV_ROUND_CLOSEST(reg * fullscale, 0x7ff0);
+}
+
 /* sysfs callback function */
 static ssize_t show_in(struct device *dev, struct device_attribute *da,
 	char *buf)
 {
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 	struct i2c_client *client = to_i2c_client(dev);
-	int in;
 	int res;
+	int index = attr->index;
 
-	res = ads1015_read_value(client, attr->index, &in);
+	res = ads1015_read_adc(client, index);
+	if (res < 0)
+		return res;
 
-	return (res < 0) ? res : sprintf(buf, "%d\n", in);
+	return sprintf(buf, "%d\n", ads1015_reg_to_mv(client, index, res));
 }
 
 static const struct sensor_device_attribute ads1015_in[] = {

drivers/hwmon/fam15h_power.c

@@ -122,6 +122,38 @@ static bool __devinit fam15h_power_is_internal_node0(struct pci_dev *f4)
 	return true;
 }
 
+/*
+ * Newer BKDG versions have an updated recommendation on how to properly
+ * initialize the running average range (was: 0xE, now: 0x9). This avoids
+ * counter saturations resulting in bogus power readings.
+ * We correct this value ourselves to cope with older BIOSes.
+ */
+static void __devinit tweak_runavg_range(struct pci_dev *pdev)
+{
+	u32 val;
+	const struct pci_device_id affected_device = {
+		PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) };
+
+	/*
+	 * let this quirk apply only to the current version of the
+	 * northbridge, since future versions may change the behavior
+	 */
+	if (!pci_match_id(&affected_device, pdev))
+		return;
+
+	pci_bus_read_config_dword(pdev->bus,
+		PCI_DEVFN(PCI_SLOT(pdev->devfn), 5),
+		REG_TDP_RUNNING_AVERAGE, &val);
+	if ((val & 0xf) != 0xe)
+		return;
+
+	val &= ~0xf;
+	val |=  0x9;
+	pci_bus_write_config_dword(pdev->bus,
+		PCI_DEVFN(PCI_SLOT(pdev->devfn), 5),
+		REG_TDP_RUNNING_AVERAGE, val);
+}
+
 static void __devinit fam15h_power_init_data(struct pci_dev *f4,
 					     struct fam15h_power_data *data)
 {
@@ -155,6 +187,13 @@ static int __devinit fam15h_power_probe(struct pci_dev *pdev,
 	struct device *dev;
 	int err;
 
+	/*
+	 * though we ignore every other northbridge, we still have to
+	 * do the tweaking on _each_ node in MCM processors as the counters
+	 * are working hand-in-hand
+	 */
+	tweak_runavg_range(pdev);
+
 	if (!fam15h_power_is_internal_node0(pdev)) {
 		err = -ENODEV;
 		goto exit;