[ARM] 4973/1: Tosa: use leds-gpio driver.

Now as the scoop pins are covered by the generic gpio API,
we can use leds-gpio driver instead of special leds-tosa.
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-pxa/tosa.c

@@ -421,9 +421,30 @@ static struct platform_device tosa_gpio_keys_device = {
 /*
  * Tosa LEDs
  */
+struct gpio_led tosa_gpio_leds[] = {
+	{
+		.name			= "tosa:amber:charge",
+		.default_trigger	= "main-battery-charging",
+		.gpio			= TOSA_GPIO_CHRG_ERR_LED,
+	},
+	{
+		.name			= "tosa:green:mail",
+		.default_trigger	= "nand-disk",
+		.gpio			= TOSA_GPIO_NOTE_LED,
+	},
+};
+
+struct gpio_led_platform_data tosa_gpio_leds_platform_data = {
+	.leds		= tosa_gpio_leds,
+	.num_leds	= ARRAY_SIZE(tosa_gpio_leds),
+};
+
 static struct platform_device tosaled_device = {
-    .name   = "tosa-led",
+	.name	= "leds-gpio",
 	.id	= -1,
+	.dev	= {
+		.platform_data	= &tosa_gpio_leds_platform_data,
+	},
 };
 
 static struct platform_device *devices[] __initdata = {

include/asm-arm/arch-pxa/tosa.h

@@ -46,8 +46,8 @@
  */
 #define TOSA_SCOOP_JC_GPIO_BASE		(NR_BUILTIN_GPIO + 12)
 #define TOSA_SCOOP_JC_BT_LED		SCOOP_GPCR_PA11
-#define TOSA_SCOOP_JC_NOTE_LED		SCOOP_GPCR_PA12
-#define TOSA_SCOOP_JC_CHRG_ERR_LED	SCOOP_GPCR_PA13
+#define TOSA_GPIO_NOTE_LED		(TOSA_SCOOP_JC_GPIO_BASE + 1)
+#define TOSA_GPIO_CHRG_ERR_LED		(TOSA_SCOOP_JC_GPIO_BASE + 2)
 #define TOSA_GPIO_USB_PULLUP		(TOSA_SCOOP_JC_GPIO_BASE + 3)
 #define TOSA_SCOOP_JC_TC6393_SUSPEND	SCOOP_GPCR_PA15
 #define TOSA_SCOOP_JC_TC3693_L3V_ON	SCOOP_GPCR_PA16
@@ -56,8 +56,7 @@
 #define TOSA_SCOOP_JC_CARD_LIMIT_SEL	SCOOP_GPCR_PA19
 
 /* GPIO Direction   1 : output mode / 0:input mode */
-#define TOSA_SCOOP_JC_IO_DIR ( TOSA_SCOOP_JC_BT_LED | TOSA_SCOOP_JC_NOTE_LED | \
-		TOSA_SCOOP_JC_CHRG_ERR_LED | \
+#define TOSA_SCOOP_JC_IO_DIR ( TOSA_SCOOP_JC_BT_LED | \
 		TOSA_SCOOP_JC_TC6393_SUSPEND | TOSA_SCOOP_JC_TC3693_L3V_ON | \
 		TOSA_SCOOP_JC_WLAN_LED | TOSA_SCOOP_JC_CARD_LIMIT_SEL )