staging: comedi: addi_apci_1516: remove use of devpriv->s_EeParameters

This driver no longer reads the eeprom to find the board specific data,
all the necessary data is in the boardinfo. Use the boardinfo directly
instead of passing through devpriv->s_EeParameters.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/addi_apci_1516.c

@@ -87,21 +87,6 @@ static int __devinit apci1516_auto_attach(struct comedi_device *dev,
 	dev->iobase = pci_resource_start(pcidev, 1);
 	devpriv->i_IobaseAddon = pci_resource_start(pcidev, 2);
 
-	/* Initialize parameters that can be overridden in EEPROM */
-	devpriv->s_EeParameters.i_NbrAiChannel = this_board->i_NbrAiChannel;
-	devpriv->s_EeParameters.i_NbrAoChannel = this_board->i_NbrAoChannel;
-	devpriv->s_EeParameters.i_AiMaxdata = this_board->i_AiMaxdata;
-	devpriv->s_EeParameters.i_AoMaxdata = this_board->i_AoMaxdata;
-	devpriv->s_EeParameters.i_NbrDiChannel = this_board->i_NbrDiChannel;
-	devpriv->s_EeParameters.i_NbrDoChannel = this_board->i_NbrDoChannel;
-	devpriv->s_EeParameters.i_DoMaxdata = this_board->i_DoMaxdata;
-	devpriv->s_EeParameters.i_Dma = this_board->i_Dma;
-	devpriv->s_EeParameters.i_Timer = this_board->i_Timer;
-	devpriv->s_EeParameters.ui_MinAcquisitiontimeNs =
-		this_board->ui_MinAcquisitiontimeNs;
-	devpriv->s_EeParameters.ui_MinDelaytimeNs =
-		this_board->ui_MinDelaytimeNs;
-
 	n_subdevices = 7;
 	ret = comedi_alloc_subdevices(dev, n_subdevices);
 	if (ret)
@@ -117,13 +102,12 @@ static int __devinit apci1516_auto_attach(struct comedi_device *dev,
 
 	/*  Allocate and Initialise DI Subdevice Structures */
 	s = &dev->subdevices[2];
-	if (devpriv->s_EeParameters.i_NbrDiChannel) {
+	if (this_board->i_NbrDiChannel) {
 		s->type = COMEDI_SUBD_DI;
 		s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_COMMON;
-		s->n_chan = devpriv->s_EeParameters.i_NbrDiChannel;
+		s->n_chan = this_board->i_NbrDiChannel;
 		s->maxdata = 1;
-		s->len_chanlist =
-			devpriv->s_EeParameters.i_NbrDiChannel;
+		s->len_chanlist = this_board->i_NbrDiChannel;
 		s->range_table = &range_digital;
 		s->io_bits = 0;	/* all bits input */
 		s->insn_bits = apci1516_di_insn_bits;
@@ -132,14 +116,13 @@ static int __devinit apci1516_auto_attach(struct comedi_device *dev,
 	}
 	/*  Allocate and Initialise DO Subdevice Structures */
 	s = &dev->subdevices[3];
-	if (devpriv->s_EeParameters.i_NbrDoChannel) {
+	if (this_board->i_NbrDoChannel) {
 		s->type = COMEDI_SUBD_DO;
 		s->subdev_flags =
 			SDF_READABLE | SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
-		s->n_chan = devpriv->s_EeParameters.i_NbrDoChannel;
-		s->maxdata = devpriv->s_EeParameters.i_DoMaxdata;
-		s->len_chanlist =
-			devpriv->s_EeParameters.i_NbrDoChannel;
+		s->n_chan = this_board->i_NbrDoChannel;
+		s->maxdata = 1;
+		s->len_chanlist = this_board->i_NbrDoChannel;
 		s->range_table = &range_digital;
 		s->io_bits = 0xf;	/* all bits output */
 		s->insn_bits = apci1516_do_insn_bits;
@@ -149,7 +132,7 @@ static int __devinit apci1516_auto_attach(struct comedi_device *dev,
 
 	/*  Allocate and Initialise Timer Subdevice Structures */
 	s = &dev->subdevices[4];
-	if (devpriv->s_EeParameters.i_Timer) {
+	if (this_board->i_Timer) {
 		s->type = COMEDI_SUBD_TIMER;
 		s->subdev_flags = SDF_WRITEABLE | SDF_GROUND | SDF_COMMON;
 		s->n_chan = 1;