Merge git://git.kernel.org/pub/scm/linux/kernel/git/bcollins/linux1394-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bcollins/linux1394-2.6: (28 commits)
  eth1394: replace __constant_htons by htons
  ieee1394: adjust code formatting in highlevel.c
  ieee1394: hl_irqs_lock is taken in hardware interrupt context
  ieee1394_core: switch to kthread API
  ieee1394: sbp2: Kconfig fix
  ieee1394: add preprocessor constant for invalid csr address
  sbp2: fix deregistration of status fifo address space
  [PATCH] eth1394: endian fixes
  Fix broken suspend/resume in ohci1394
  sbp2: use __attribute__((packed)) for on-the-wire structures
  sbp2: provide helptext for CONFIG_IEEE1394_SBP2_PHYS_DMA and mark it experimental
  Update feature removal of obsolete raw1394 ISO requests.
  sbp2: fix S800 transfers if phys_dma is off
  sbp2: remove ohci1394 specific constant
  ohci1394: make phys_dma parameter read-only
  ohci1394: set address range properties
  ieee1394: extend lowlevel API for address range properties
  sbp2: log number of supported concurrent logins
  sbp2: remove manipulation of inquiry response
  ieee1394: save RAM by using a single tlabel for broadcast transactions
  ...

Documentation/feature-removal-schedule.txt

@@ -49,11 +49,11 @@ Who:	Paul E. McKenney <paulmck@us.ibm.com>
 ---------------------------
 
 What:	raw1394: requests of type RAW1394_REQ_ISO_SEND, RAW1394_REQ_ISO_LISTEN
-When:	November 2005
+When:	November 2006
 Why:	Deprecated in favour of the new ioctl-based rawiso interface, which is
 	more efficient.  You should really be using libraw1394 for raw1394
 	access anyway.
-Who:	Jody McIntyre <scjody@steamballoon.com>
+Who:	Jody McIntyre <scjody@modernduck.com>
 
 ---------------------------
 

drivers/ieee1394/Kconfig

@@ -128,8 +128,17 @@ config IEEE1394_SBP2
 	  1394 bus.  SBP-2 devices include harddrives and DVD devices.
 
 config IEEE1394_SBP2_PHYS_DMA
-	bool "Enable Phys DMA support for SBP2 (Debug)"
-	depends on IEEE1394 && IEEE1394_SBP2
+	bool "Enable replacement for physical DMA in SBP2"
+	depends on IEEE1394 && IEEE1394_SBP2 && EXPERIMENTAL && (X86_32 || PPC_32)
+	help
+	  This builds sbp2 for use with non-OHCI host adapters which do not
+	  support physical DMA or for when ohci1394 is run with phys_dma=0.
+	  Physical DMA is data movement without assistence of the drivers'
+	  interrupt handlers.  This option includes the interrupt handlers
+	  that are required in absence of this hardware feature.
+
+	  This option is buggy and currently broken on some architectures.
+	  If unsure, say N.
 
 config IEEE1394_ETH1394
 	tristate "Ethernet over 1394"

drivers/ieee1394/csr1212.c

@@ -779,7 +779,7 @@ static int csr1212_append_new_cache(struct csr1212_csr *csr, size_t romsize)
 	romsize = (romsize + (csr->max_rom - 1)) & ~(csr->max_rom - 1);
 
 	csr_addr = csr->ops->allocate_addr_range(romsize, csr->max_rom, csr->private);
-	if (csr_addr == ~0ULL) {
+	if (csr_addr == CSR1212_INVALID_ADDR_SPACE) {
 		return CSR1212_ENOMEM;
 	}
 	if (csr_addr < CSR1212_REGISTER_SPACE_BASE) {

drivers/ieee1394/csr1212.h

@@ -192,6 +192,7 @@
 
 #define  CSR1212_EXTENDED_ROM_SIZE		(0x10000 * sizeof(u_int32_t))
 
+#define  CSR1212_INVALID_ADDR_SPACE		-1
 
 /* Config ROM image structures */
 struct csr1212_bus_info_block_img {

drivers/ieee1394/dma.c

@@ -145,12 +145,12 @@ void dma_region_free(struct dma_region *dma)
 /* find the scatterlist index and remaining offset corresponding to a
    given offset from the beginning of the buffer */
 static inline int dma_region_find(struct dma_region *dma, unsigned long offset,
-				  unsigned long *rem)
+				  unsigned int start, unsigned long *rem)
 {
 	int i;
 	unsigned long off = offset;
 
-	for (i = 0; i < dma->n_dma_pages; i++) {
+	for (i = start; i < dma->n_dma_pages; i++) {
 		if (off < sg_dma_len(&dma->sglist[i])) {
 			*rem = off;
 			break;
@@ -170,7 +170,7 @@ dma_addr_t dma_region_offset_to_bus(struct dma_region * dma,
 	unsigned long rem = 0;
 
 	struct scatterlist *sg =
-	    &dma->sglist[dma_region_find(dma, offset, &rem)];
+	    &dma->sglist[dma_region_find(dma, offset, 0, &rem)];
 	return sg_dma_address(sg) + rem;
 }
 
@@ -178,13 +178,13 @@ void dma_region_sync_for_cpu(struct dma_region *dma, unsigned long offset,
 			     unsigned long len)
 {
 	int first, last;
-	unsigned long rem;
+	unsigned long rem = 0;
 
 	if (!len)
 		len = 1;
 
-	first = dma_region_find(dma, offset, &rem);
-	last = dma_region_find(dma, offset + len - 1, &rem);
+	first = dma_region_find(dma, offset, 0, &rem);
+	last = dma_region_find(dma, rem + len - 1, first, &rem);
 
 	pci_dma_sync_sg_for_cpu(dma->dev, &dma->sglist[first], last - first + 1,
 				dma->direction);
@@ -194,13 +194,13 @@ void dma_region_sync_for_device(struct dma_region *dma, unsigned long offset,
 				unsigned long len)
 {
 	int first, last;
-	unsigned long rem;
+	unsigned long rem = 0;
 
 	if (!len)
 		len = 1;
 
-	first = dma_region_find(dma, offset, &rem);
-	last = dma_region_find(dma, offset + len - 1, &rem);
+	first = dma_region_find(dma, offset, 0, &rem);
+	last = dma_region_find(dma, rem + len - 1, first, &rem);
 
 	pci_dma_sync_sg_for_device(dma->dev, &dma->sglist[first],
 				   last - first + 1, dma->direction);

drivers/ieee1394/eth1394.c

@@ -367,7 +367,7 @@ static int eth1394_probe(struct device *dev)
 	spin_lock_init(&node_info->pdg.lock);
 	INIT_LIST_HEAD(&node_info->pdg.list);
 	node_info->pdg.sz = 0;
-	node_info->fifo = ETHER1394_INVALID_ADDR;
+	node_info->fifo = CSR1212_INVALID_ADDR_SPACE;
 
 	ud->device.driver_data = node_info;
 	new_node->ud = ud;
@@ -502,10 +502,8 @@ static void ether1394_reset_priv (struct net_device *dev, int set_mtu)
 
 	/* Determine speed limit */
 	for (i = 0; i < host->node_count; i++)
-		if (max_speed > host->speed_map[NODEID_TO_NODE(host->node_id) *
-						64 + i])
-			max_speed = host->speed_map[NODEID_TO_NODE(host->node_id) *
-						    64 + i];
+		if (max_speed > host->speed[i])
+			max_speed = host->speed[i];
 	priv->bc_sspd = max_speed;
 
 	/* We'll use our maxpayload as the default mtu */
@@ -568,13 +566,11 @@ static void ether1394_add_host (struct hpsb_host *host)
 	if (!(host->config_roms & HPSB_CONFIG_ROM_ENTRY_IP1394))
 		return;
 
-	fifo_addr = hpsb_allocate_and_register_addrspace(&eth1394_highlevel,
-							 host,
-							 &addr_ops,
-							 ETHER1394_REGION_ADDR_LEN,
-							 ETHER1394_REGION_ADDR_LEN,
-							 -1, -1);
-	if (fifo_addr == ~0ULL)
+	fifo_addr = hpsb_allocate_and_register_addrspace(
+			&eth1394_highlevel, host, &addr_ops,
+			ETHER1394_REGION_ADDR_LEN, ETHER1394_REGION_ADDR_LEN,
+			CSR1212_INVALID_ADDR_SPACE, CSR1212_INVALID_ADDR_SPACE);
+	if (fifo_addr == CSR1212_INVALID_ADDR_SPACE)
 		goto out;
 
 	/* We should really have our own alloc_hpsbdev() function in
@@ -774,7 +770,7 @@ static int ether1394_rebuild_header(struct sk_buff *skb)
 	default:
 		ETH1394_PRINT(KERN_DEBUG, dev->name,
 			      "unable to resolve type %04x addresses.\n",
-			      eth->h_proto);
+			      ntohs(eth->h_proto));
 		break;
 	}
 
@@ -796,9 +792,8 @@ static int ether1394_header_cache(struct neighbour *neigh, struct hh_cache *hh)
 						      (16 - ETH1394_HLEN));
 	struct net_device *dev = neigh->dev;
 
-	if (type == __constant_htons(ETH_P_802_3)) {
+	if (type == htons(ETH_P_802_3))
 		return -1;
-	}
 
 	eth->h_proto = type;
 	memcpy(eth->h_dest, neigh->ha, dev->addr_len);
@@ -887,7 +882,7 @@ static inline u16 ether1394_parse_encap(struct sk_buff *skb,
 	/* If this is an ARP packet, convert it. First, we want to make
 	 * use of some of the fields, since they tell us a little bit
 	 * about the sending machine.  */
-	if (ether_type == __constant_htons (ETH_P_ARP)) {
+	if (ether_type == htons(ETH_P_ARP)) {
 		struct eth1394_arp *arp1394 = (struct eth1394_arp*)skb->data;
 		struct arphdr *arp = (struct arphdr *)skb->data;
 		unsigned char *arp_ptr = (unsigned char *)(arp + 1);
@@ -935,7 +930,7 @@ static inline u16 ether1394_parse_encap(struct sk_buff *skb,
 		*(u32*)arp_ptr = arp1394->sip;	/* move sender IP addr */
 		arp_ptr += arp->ar_pln;		/* skip over sender IP addr */
 
-		if (arp->ar_op == 1)
+		if (arp->ar_op == htons(ARPOP_REQUEST))
 			/* just set ARP req target unique ID to 0 */
 			*((u64*)arp_ptr) = 0;
 		else
@@ -943,8 +938,8 @@ static inline u16 ether1394_parse_encap(struct sk_buff *skb,
 	}
 
 	/* Now add the ethernet header. */
-	if (dev->hard_header (skb, dev, __constant_ntohs (ether_type),
-			      &dest_hw, NULL, skb->len) >= 0)
+	if (dev->hard_header(skb, dev, ntohs(ether_type), &dest_hw, NULL,
+			     skb->len) >= 0)
 		ret = ether1394_type_trans(skb, dev);
 
 	return ret;
@@ -1395,7 +1390,7 @@ static inline void ether1394_arp_to_1394arp(struct sk_buff *skb,
 /* We need to encapsulate the standard header with our own. We use the
  * ethernet header's proto for our own. */
 static inline unsigned int ether1394_encapsulate_prep(unsigned int max_payload,
-						      int proto,
+						      __be16 proto,
 						      union eth1394_hdr *hdr,
 						      u16 dg_size, u16 dgl)
 {
@@ -1514,7 +1509,7 @@ static inline void ether1394_prep_gasp_packet(struct hpsb_packet *p,
 	p->data = ((quadlet_t*)skb->data) - 2;
 	p->data[0] = cpu_to_be32((priv->host->node_id << 16) |
 				 ETHER1394_GASP_SPECIFIER_ID_HI);
-	p->data[1] = __constant_cpu_to_be32((ETHER1394_GASP_SPECIFIER_ID_LO << 24) |
+	p->data[1] = cpu_to_be32((ETHER1394_GASP_SPECIFIER_ID_LO << 24) |
 				 ETHER1394_GASP_VERSION);
 
 	/* Setting the node id to ALL_NODES (not LOCAL_BUS | ALL_NODES)
@@ -1626,7 +1621,7 @@ static int ether1394_tx (struct sk_buff *skb, struct net_device *dev)
 	gfp_t kmflags = in_interrupt() ? GFP_ATOMIC : GFP_KERNEL;
 	struct eth1394hdr *eth;
 	struct eth1394_priv *priv = netdev_priv(dev);
-	int proto;
+	__be16 proto;
 	unsigned long flags;
 	nodeid_t dest_node;
 	eth1394_tx_type tx_type;
@@ -1670,9 +1665,9 @@ static int ether1394_tx (struct sk_buff *skb, struct net_device *dev)
 	/* Set the transmission type for the packet.  ARP packets and IP
 	 * broadcast packets are sent via GASP. */
 	if (memcmp(eth->h_dest, dev->broadcast, ETH1394_ALEN) == 0 ||
-	    proto == __constant_htons(ETH_P_ARP) ||
-	    (proto == __constant_htons(ETH_P_IP) &&
-	     IN_MULTICAST(__constant_ntohl(skb->nh.iph->daddr)))) {
+	    proto == htons(ETH_P_ARP) ||
+	    (proto == htons(ETH_P_IP) &&
+	     IN_MULTICAST(ntohl(skb->nh.iph->daddr)))) {
 		tx_type = ETH1394_GASP;
 		dest_node = LOCAL_BUS | ALL_NODES;
 		max_payload = priv->bc_maxpayload - ETHER1394_GASP_OVERHEAD;
@@ -1688,7 +1683,7 @@ static int ether1394_tx (struct sk_buff *skb, struct net_device *dev)
 			goto fail;
 		}
 		node_info = (struct eth1394_node_info*)node->ud->device.driver_data;
-		if (node_info->fifo == ETHER1394_INVALID_ADDR) {
+		if (node_info->fifo == CSR1212_INVALID_ADDR_SPACE) {
 			ret = -EAGAIN;
 			goto fail;
 		}
@@ -1704,7 +1699,7 @@ static int ether1394_tx (struct sk_buff *skb, struct net_device *dev)
 	}
 
 	/* If this is an ARP packet, convert it */
-	if (proto == __constant_htons (ETH_P_ARP))
+	if (proto == htons(ETH_P_ARP))
 		ether1394_arp_to_1394arp (skb, dev);
 
 	ptask->hdr.words.word1 = 0;

drivers/ieee1394/eth1394.h

@@ -32,8 +32,6 @@
  * S3200 (per Table 16-3 of IEEE 1394b-2002). */
 #define ETHER1394_REGION_ADDR_LEN	4096
 
-#define ETHER1394_INVALID_ADDR		~0ULL
-
 /* GASP identifier numbers for IPv4 over IEEE 1394 */
 #define ETHER1394_GASP_SPECIFIER_ID	0x00005E
 #define ETHER1394_GASP_SPECIFIER_ID_HI	((ETHER1394_GASP_SPECIFIER_ID >> 8) & 0xffff)

drivers/ieee1394/hosts.c

@@ -19,6 +19,7 @@
 #include <linux/pci.h>
 #include <linux/timer.h>
 #include <linux/jiffies.h>
+#include <linux/mutex.h>
 
 #include "csr1212.h"
 #include "ieee1394.h"
@@ -105,7 +106,7 @@ static int alloc_hostnum_cb(struct hpsb_host *host, void *__data)
  * Return Value: a pointer to the &hpsb_host if succesful, %NULL if
  * no memory was available.
  */
-static DECLARE_MUTEX(host_num_alloc);
+static DEFINE_MUTEX(host_num_alloc);
 
 struct hpsb_host *hpsb_alloc_host(struct hpsb_host_driver *drv, size_t extra,
 				  struct device *dev)
@@ -148,7 +149,7 @@ struct hpsb_host *hpsb_alloc_host(struct hpsb_host_driver *drv, size_t extra,
 	h->topology_map = h->csr.topology_map + 3;
 	h->speed_map = (u8 *)(h->csr.speed_map + 2);
 
-	down(&host_num_alloc);
+	mutex_lock(&host_num_alloc);
 
 	while (nodemgr_for_each_host(&hostnum, alloc_hostnum_cb))
 		hostnum++;
@@ -167,7 +168,7 @@ struct hpsb_host *hpsb_alloc_host(struct hpsb_host_driver *drv, size_t extra,
 	class_device_register(&h->class_dev);
 	get_device(&h->device);
 
-	up(&host_num_alloc);
+	mutex_unlock(&host_num_alloc);
 
 	return h;
 }

drivers/ieee1394/hosts.h

@@ -32,7 +32,8 @@ struct hpsb_host {
 
 	int node_count;      /* number of identified nodes on this bus */
 	int selfid_count;    /* total number of SelfIDs received */
-	int nodes_active; /* number of nodes that are actually active */
+	int nodes_active;    /* number of nodes with active link layer */
+	u8 speed[ALL_NODES]; /* speed between each node and local node */
 
 	nodeid_t node_id;    /* node ID of this host */
 	nodeid_t irm_id;     /* ID of this bus' isochronous resource manager */
@@ -55,7 +56,7 @@ struct hpsb_host {
 	struct csr_control csr;
 
 	/* Per node tlabel pool allocation */
-	struct hpsb_tlabel_pool tpool[64];
+	struct hpsb_tlabel_pool tpool[ALL_NODES];
 
 	struct hpsb_host_driver *driver;
 
@@ -72,6 +73,8 @@ struct hpsb_host {
 	unsigned int config_roms;
 
 	struct list_head addr_space;
+	u64 low_addr_space;	/* upper bound of physical DMA area */
+	u64 middle_addr_space;	/* upper bound of posted write area */
 };
 
 

drivers/ieee1394/ieee1394_core.c

@@ -33,6 +33,7 @@
 #include <linux/kdev_t.h>
 #include <linux/skbuff.h>
 #include <linux/suspend.h>
+#include <linux/kthread.h>
 
 #include <asm/byteorder.h>
 #include <asm/semaphore.h>
@@ -285,9 +286,9 @@ static int check_selfids(struct hpsb_host *host)
 
 static void build_speed_map(struct hpsb_host *host, int nodecount)
 {
-	u8 speedcap[nodecount];
 	u8 cldcnt[nodecount];
 	u8 *map = host->speed_map;
+	u8 *speedcap = host->speed;
 	struct selfid *sid;
 	struct ext_selfid *esid;
 	int i, j, n;
@@ -354,6 +355,11 @@ static void build_speed_map(struct hpsb_host *host, int nodecount)
 			}
 		}
 	}
+
+	/* assume maximum speed for 1394b PHYs, nodemgr will correct it */
+	for (n = 0; n < nodecount; n++)
+		if (speedcap[n] == 3)
+			speedcap[n] = IEEE1394_SPEED_MAX;
 }
 
 
@@ -554,11 +560,10 @@ int hpsb_send_packet(struct hpsb_packet *packet)
 		return 0;
 	}
 
-	if (packet->type == hpsb_async && packet->node_id != ALL_NODES) {
+	if (packet->type == hpsb_async &&
+	    NODEID_TO_NODE(packet->node_id) != ALL_NODES)
 		packet->speed_code =
-			host->speed_map[NODEID_TO_NODE(host->node_id) * 64
-				       + NODEID_TO_NODE(packet->node_id)];
-	}
+			host->speed[NODEID_TO_NODE(packet->node_id)];
 
 	dump_packet("send packet", packet->header, packet->header_size, packet->speed_code);
 
@@ -997,11 +1002,8 @@ void abort_timedouts(unsigned long __opaque)
  * packets that have a "complete" function are sent here. This way, the
  * completion is run out of kernel context, and doesn't block the rest of
  * the stack. */
-static int khpsbpkt_pid = -1, khpsbpkt_kill;
-static DECLARE_COMPLETION(khpsbpkt_complete);
+static struct task_struct *khpsbpkt_thread;
 static struct sk_buff_head hpsbpkt_queue;
-static DECLARE_MUTEX_LOCKED(khpsbpkt_sig);
-
 
 static void queue_packet_complete(struct hpsb_packet *packet)
 {
@@ -1011,9 +1013,7 @@ static void queue_packet_complete(struct hpsb_packet *packet)
 	}
 	if (packet->complete_routine != NULL) {
 		skb_queue_tail(&hpsbpkt_queue, packet->skb);
-
-		/* Signal the kernel thread to handle this */
-		up(&khpsbpkt_sig);
+		wake_up_process(khpsbpkt_thread);
 	}
 	return;
 }
@@ -1025,19 +1025,9 @@ static int hpsbpkt_thread(void *__hi)
 	void (*complete_routine)(void*);
 	void *complete_data;
 
-	daemonize("khpsbpkt");
-
 	current->flags |= PF_NOFREEZE;
 
-	while (1) {
-		if (down_interruptible(&khpsbpkt_sig)) {
-			printk("khpsbpkt: received unexpected signal?!\n" );
-			break;
-		}
-
-		if (khpsbpkt_kill)
-			break;
-
+	while (!kthread_should_stop()) {
 		while ((skb = skb_dequeue(&hpsbpkt_queue)) != NULL) {
 			packet = (struct hpsb_packet *)skb->data;
 
@@ -1048,9 +1038,13 @@ static int hpsbpkt_thread(void *__hi)
 
 			complete_routine(complete_data);
 		}
-	}
 
-	complete_and_exit(&khpsbpkt_complete, 0);
+		set_current_state(TASK_INTERRUPTIBLE);
+		if (!skb_peek(&hpsbpkt_queue))
+			schedule();
+		__set_current_state(TASK_RUNNING);
+	}
+	return 0;
 }
 
 static int __init ieee1394_init(void)
@@ -1065,10 +1059,10 @@ static int __init ieee1394_init(void)
 		HPSB_ERR("Some features may not be available\n");
 	}
 
-	khpsbpkt_pid = kernel_thread(hpsbpkt_thread, NULL, CLONE_KERNEL);
-	if (khpsbpkt_pid < 0) {
+	khpsbpkt_thread = kthread_run(hpsbpkt_thread, NULL, "khpsbpkt");
+	if (IS_ERR(khpsbpkt_thread)) {
 		HPSB_ERR("Failed to start hpsbpkt thread!\n");
-		ret = -ENOMEM;
+		ret = PTR_ERR(khpsbpkt_thread);
 		goto exit_cleanup_config_roms;
 	}
 
@@ -1148,10 +1142,7 @@ static int __init ieee1394_init(void)
 release_chrdev:
 	unregister_chrdev_region(IEEE1394_CORE_DEV, 256);
 exit_release_kernel_thread:
-	if (khpsbpkt_pid >= 0) {
-		kill_proc(khpsbpkt_pid, SIGTERM, 1);
-		wait_for_completion(&khpsbpkt_complete);
-	}
+	kthread_stop(khpsbpkt_thread);
 exit_cleanup_config_roms:
 	hpsb_cleanup_config_roms();
 	return ret;
@@ -1172,12 +1163,7 @@ static void __exit ieee1394_cleanup(void)
 		bus_remove_file(&ieee1394_bus_type, fw_bus_attrs[i]);
 	bus_unregister(&ieee1394_bus_type);
 
-	if (khpsbpkt_pid >= 0) {
-		khpsbpkt_kill = 1;
-		mb();
-		up(&khpsbpkt_sig);
-		wait_for_completion(&khpsbpkt_complete);
-	}
+	kthread_stop(khpsbpkt_thread);
 
 	hpsb_cleanup_config_roms();
 

drivers/ieee1394/ieee1394_transactions.c

@@ -136,8 +136,11 @@ int hpsb_get_tlabel(struct hpsb_packet *packet)
 {
 	unsigned long flags;
 	struct hpsb_tlabel_pool *tp;
+	int n = NODEID_TO_NODE(packet->node_id);
 
-	tp = &packet->host->tpool[packet->node_id & NODE_MASK];
+	if (unlikely(n == ALL_NODES))
+		return 0;
+	tp = &packet->host->tpool[n];
 
 	if (irqs_disabled() || in_atomic()) {
 		if (down_trylock(&tp->count))
@@ -175,8 +178,11 @@ void hpsb_free_tlabel(struct hpsb_packet *packet)
 {
 	unsigned long flags;
 	struct hpsb_tlabel_pool *tp;
+	int n = NODEID_TO_NODE(packet->node_id);
 
-	tp = &packet->host->tpool[packet->node_id & NODE_MASK];
+	if (unlikely(n == ALL_NODES))
+		return;
+	tp = &packet->host->tpool[n];
 
 	BUG_ON(packet->tlabel > 63 || packet->tlabel < 0);
 

drivers/ieee1394/nodemgr.c

@@ -38,6 +38,7 @@ struct nodemgr_csr_info {
 	struct hpsb_host *host;
 	nodeid_t nodeid;
 	unsigned int generation;
+	unsigned int speed_unverified:1;
 };
 
 
@@ -57,23 +58,75 @@ static char *nodemgr_find_oui_name(int oui)
 	return NULL;
 }
 
+/*
+ * Correct the speed map entry.  This is necessary
+ *  - for nodes with link speed < phy speed,
+ *  - for 1394b nodes with negotiated phy port speed < IEEE1394_SPEED_MAX.
+ * A possible speed is determined by trial and error, using quadlet reads.
+ */
+static int nodemgr_check_speed(struct nodemgr_csr_info *ci, u64 addr,
+			       quadlet_t *buffer)
+{
+	quadlet_t q;
+	u8 i, *speed, old_speed, good_speed;
+	int ret;
+
+	speed = ci->host->speed + NODEID_TO_NODE(ci->nodeid);
+	old_speed = *speed;
+	good_speed = IEEE1394_SPEED_MAX + 1;
+
+	/* Try every speed from S100 to old_speed.
+	 * If we did it the other way around, a too low speed could be caught
+	 * if the retry succeeded for some other reason, e.g. because the link
+	 * just finished its initialization. */
+	for (i = IEEE1394_SPEED_100; i <= old_speed; i++) {
+		*speed = i;
+		ret = hpsb_read(ci->host, ci->nodeid, ci->generation, addr,
+				&q, sizeof(quadlet_t));
+		if (ret)
+			break;
+		*buffer = q;
+		good_speed = i;
+	}
+	if (good_speed <= IEEE1394_SPEED_MAX) {
+		HPSB_DEBUG("Speed probe of node " NODE_BUS_FMT " yields %s",
+			   NODE_BUS_ARGS(ci->host, ci->nodeid),
+			   hpsb_speedto_str[good_speed]);
+		*speed = good_speed;
+		ci->speed_unverified = 0;
+		return 0;
+	}
+	*speed = old_speed;
+	return ret;
+}
 
 static int nodemgr_bus_read(struct csr1212_csr *csr, u64 addr, u16 length,
                             void *buffer, void *__ci)
 {
 	struct nodemgr_csr_info *ci = (struct nodemgr_csr_info*)__ci;
-	int i, ret = 0;
+	int i, ret;
 
 	for (i = 1; ; i++) {
 		ret = hpsb_read(ci->host, ci->nodeid, ci->generation, addr,
 				buffer, length);
-		if (!ret || i == 3)
+		if (!ret) {
+			ci->speed_unverified = 0;
+			break;
+		}
+		/* Give up after 3rd failure. */
+		if (i == 3)
 			break;
 
+		/* The ieee1394_core guessed the node's speed capability from
+		 * the self ID.  Check whether a lower speed works. */
+		if (ci->speed_unverified && length == sizeof(quadlet_t)) {
+			ret = nodemgr_check_speed(ci, addr, buffer);
+			if (!ret)
+				break;
+		}
 		if (msleep_interruptible(334))
 			return -EINTR;
 	}
-
 	return ret;
 }
 
@@ -1204,6 +1257,8 @@ static void nodemgr_node_scan_one(struct host_info *hi,
 	ci->host = host;
 	ci->nodeid = nodeid;
 	ci->generation = generation;
+	ci->speed_unverified =
+		host->speed[NODEID_TO_NODE(nodeid)] > IEEE1394_SPEED_100;
 
 	/* We need to detect when the ConfigROM's generation has changed,
 	 * so we only update the node's info when it needs to be.  */

drivers/ieee1394/ohci1394.c

@@ -163,7 +163,7 @@ printk(level "%s: fw-host%d: " fmt "\n" , OHCI1394_DRIVER_NAME, ohci->host->id ,
 
 /* Module Parameters */
 static int phys_dma = 1;
-module_param(phys_dma, int, 0644);
+module_param(phys_dma, int, 0444);
 MODULE_PARM_DESC(phys_dma, "Enable physical dma (default = 1).");
 
 static void dma_trm_tasklet(unsigned long data);
@@ -553,7 +553,8 @@ static void ohci_initialize(struct ti_ohci *ohci)
 	 * register content.
 	 * To actually enable physical responses is the job of our interrupt
 	 * handler which programs the physical request filter. */
-	reg_write(ohci, OHCI1394_PhyUpperBound, 0x01000000);
+	reg_write(ohci, OHCI1394_PhyUpperBound,
+		  OHCI1394_PHYS_UPPER_BOUND_PROGRAMMED >> 16);
 
 	DBGMSG("physUpperBoundOffset=%08x",
 	       reg_read(ohci, OHCI1394_PhyUpperBound));
@@ -580,6 +581,7 @@ static void ohci_initialize(struct ti_ohci *ohci)
 		  OHCI1394_isochRx |
 		  OHCI1394_isochTx |
 		  OHCI1394_postedWriteErr |
+		  OHCI1394_cycleTooLong |
 		  OHCI1394_cycleInconsistent);
 
 	/* Enable link */
@@ -2382,6 +2384,15 @@ static irqreturn_t ohci_irq_handler(int irq, void *dev_id,
 		PRINT(KERN_ERR, "physical posted write error");
 		/* no recovery strategy yet, had to involve protocol drivers */
 	}
+	if (event & OHCI1394_cycleTooLong) {
+		if(printk_ratelimit())
+			PRINT(KERN_WARNING, "isochronous cycle too long");
+		else
+			DBGMSG("OHCI1394_cycleTooLong");
+		reg_write(ohci, OHCI1394_LinkControlSet,
+			  OHCI1394_LinkControl_CycleMaster);
+		event &= ~OHCI1394_cycleTooLong;
+	}
 	if (event & OHCI1394_cycleInconsistent) {
 		/* We subscribe to the cycleInconsistent event only to
 		 * clear the corresponding event bit... otherwise,
@@ -3400,6 +3411,14 @@ static int __devinit ohci1394_pci_probe(struct pci_dev *dev,
 	host->csr.max_rec = (reg_read(ohci, OHCI1394_BusOptions) >> 12) & 0xf;
 	host->csr.lnk_spd = reg_read(ohci, OHCI1394_BusOptions) & 0x7;
 
+	if (phys_dma) {
+		host->low_addr_space =
+			(u64) reg_read(ohci, OHCI1394_PhyUpperBound) << 16;
+		if (!host->low_addr_space)
+			host->low_addr_space = OHCI1394_PHYS_UPPER_BOUND_FIXED;
+	}
+	host->middle_addr_space = OHCI1394_MIDDLE_ADDRESS_SPACE;
+
 	/* Tell the highlevel this host is ready */
 	if (hpsb_add_host(host))
 		FAIL(-ENOMEM, "Failed to register host with highlevel");
@@ -3458,24 +3477,13 @@ static void ohci1394_pci_remove(struct pci_dev *pdev)
 	case OHCI_INIT_HAVE_TXRX_BUFFERS__MAYBE:
 		/* The ohci_soft_reset() stops all DMA contexts, so we
 		 * dont need to do this.  */
-		/* Free AR dma */
 		free_dma_rcv_ctx(&ohci->ar_req_context);
 		free_dma_rcv_ctx(&ohci->ar_resp_context);
-
-		/* Free AT dma */
 		free_dma_trm_ctx(&ohci->at_req_context);
 		free_dma_trm_ctx(&ohci->at_resp_context);
-
-		/* Free IR dma */
 		free_dma_rcv_ctx(&ohci->ir_legacy_context);
-
-		/* Free IT dma */
 		free_dma_trm_ctx(&ohci->it_legacy_context);
 
-		/* Free IR legacy dma */
-		free_dma_rcv_ctx(&ohci->ir_legacy_context);
-
-
 	case OHCI_INIT_HAVE_SELFID_BUFFER:
 		pci_free_consistent(ohci->dev, OHCI1394_SI_DMA_BUF_SIZE,
 				    ohci->selfid_buf_cpu,
@@ -3535,6 +3543,7 @@ static int ohci1394_pci_resume (struct pci_dev *pdev)
 	}
 #endif /* CONFIG_PPC_PMAC */
 
+	pci_restore_state(pdev);
 	pci_enable_device(pdev);
 
 	return 0;
@@ -3554,6 +3563,8 @@ static int ohci1394_pci_suspend (struct pci_dev *pdev, pm_message_t state)
 	}
 #endif
 
+	pci_save_state(pdev);
+
 	return 0;
 }
 

drivers/ieee1394/ohci1394.h

@@ -443,6 +443,16 @@ static inline u32 reg_read(const struct ti_ohci *ohci, int offset)
 
 #define OHCI1394_TCODE_PHY               0xE
 
+/* Node offset map (phys DMA area, posted write area).
+ * The value of OHCI1394_PHYS_UPPER_BOUND_PROGRAMMED may be modified but must
+ * be lower than OHCI1394_MIDDLE_ADDRESS_SPACE.
+ * OHCI1394_PHYS_UPPER_BOUND_FIXED and OHCI1394_MIDDLE_ADDRESS_SPACE are
+ * constants given by the OHCI spec.
+ */
+#define OHCI1394_PHYS_UPPER_BOUND_FIXED		0x000100000000ULL /* 4 GB */
+#define OHCI1394_PHYS_UPPER_BOUND_PROGRAMMED	0x010000000000ULL /* 1 TB */
+#define OHCI1394_MIDDLE_ADDRESS_SPACE		0xffff00000000ULL
+
 void ohci1394_init_iso_tasklet(struct ohci1394_iso_tasklet *tasklet,
 			       int type,
 			       void (*func)(unsigned long),

drivers/ieee1394/raw1394.c

@@ -447,7 +447,7 @@ static int
 raw1394_compat_read(const char __user *buf, struct raw1394_request *r)
 {
 	struct compat_raw1394_req __user *cr = (typeof(cr)) r;
-	if (!access_ok(VERIFY_WRITE,cr,sizeof(struct compat_raw1394_req)) ||
+	if (!access_ok(VERIFY_WRITE, cr, sizeof(struct compat_raw1394_req)) ||
 	    P(type) ||
 	    P(error) ||
 	    P(misc) ||
@@ -516,7 +516,6 @@ static ssize_t raw1394_read(struct file *file, char __user * buffer,
    	    sizeof(struct compat_raw1394_req) !=
 			sizeof(struct raw1394_request)) {
 		ret = raw1394_compat_read(buffer, &req->req);
-
 	} else
 #endif
 	{
@@ -2348,7 +2347,6 @@ static int state_connected(struct file_info *fi, struct pending_request *req)
 	return handle_async_request(fi, req, node);
 }
 
-
 static ssize_t raw1394_write(struct file *file, const char __user * buffer,
 			     size_t count, loff_t * offset_is_ignored)
 {

drivers/ieee1394/sbp2.c

@@ -127,10 +127,12 @@ MODULE_PARM_DESC(max_sectors, "Change max sectors per I/O supported (default = "
  * talking to a single sbp2 device at the same time (filesystem coherency,
  * etc.). If you're running an sbp2 device that supports multiple logins,
  * and you're either running read-only filesystems or some sort of special
- * filesystem supporting multiple hosts (one such filesystem is OpenGFS,
- * see opengfs.sourceforge.net for more info), then set exclusive_login
- * to zero. Note: The Oxsemi OXFW911 sbp2 chipset supports up to four
- * concurrent logins.
+ * filesystem supporting multiple hosts, e.g. OpenGFS, Oracle Cluster
+ * File System, or Lustre, then set exclusive_login to zero.
+ *
+ * So far only bridges from Oxford Semiconductor are known to support
+ * concurrent logins. Depending on firmware, four or two concurrent logins
+ * are possible on OXFW911 and newer Oxsemi bridges.
  */
 static int exclusive_login = 1;
 module_param(exclusive_login, int, 0644);
@@ -306,8 +308,9 @@ static const struct {
 	u32 model_id;
 	unsigned workarounds;
 } sbp2_workarounds_table[] = {
-	/* TSB42AA9 */ {
+	/* DViCO Momobay CX-1 with TSB42AA9 bridge */ {
 		.firmware_revision	= 0x002800,
+		.model_id		= 0x001010,
 		.workarounds		= SBP2_WORKAROUND_INQUIRY_36 |
 					  SBP2_WORKAROUND_MODE_SENSE_8,
 	},
@@ -791,12 +794,12 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud
 	scsi_id->ud = ud;
 	scsi_id->speed_code = IEEE1394_SPEED_100;
 	scsi_id->max_payload_size = sbp2_speedto_max_payload[IEEE1394_SPEED_100];
+	scsi_id->status_fifo_addr = CSR1212_INVALID_ADDR_SPACE;
 	atomic_set(&scsi_id->sbp2_login_complete, 0);
 	INIT_LIST_HEAD(&scsi_id->sbp2_command_orb_inuse);
 	INIT_LIST_HEAD(&scsi_id->sbp2_command_orb_completed);
 	INIT_LIST_HEAD(&scsi_id->scsi_list);
 	spin_lock_init(&scsi_id->sbp2_command_orb_lock);
-	scsi_id->sbp2_lun = 0;
 
 	ud->device.driver_data = scsi_id;
 
@@ -844,8 +847,8 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud
 	scsi_id->status_fifo_addr = hpsb_allocate_and_register_addrspace(
 			&sbp2_highlevel, ud->ne->host, &sbp2_ops,
 			sizeof(struct sbp2_status_block), sizeof(quadlet_t),
-			0x010000000000ULL, CSR1212_ALL_SPACE_END);
-	if (scsi_id->status_fifo_addr == ~0ULL) {
+			ud->ne->host->low_addr_space, CSR1212_ALL_SPACE_END);
+	if (scsi_id->status_fifo_addr == CSR1212_INVALID_ADDR_SPACE) {
 		SBP2_ERR("failed to allocate status FIFO address range");
 		goto failed_alloc;
 	}
@@ -1087,7 +1090,7 @@ static void sbp2_remove_device(struct scsi_id_instance_data *scsi_id)
 		SBP2_DMA_FREE("single query logins data");
 	}
 
-	if (scsi_id->status_fifo_addr)
+	if (scsi_id->status_fifo_addr != CSR1212_INVALID_ADDR_SPACE)
 		hpsb_unregister_addrspace(&sbp2_highlevel, hi->host,
 					  scsi_id->status_fifo_addr);
 
@@ -1213,13 +1216,11 @@ static int sbp2_query_logins(struct scsi_id_instance_data *scsi_id)
 	SBP2_DEBUG("length_max_logins = %x",
 		   (unsigned int)scsi_id->query_logins_response->length_max_logins);
 
-	SBP2_DEBUG("Query logins to SBP-2 device successful");
-
 	max_logins = RESPONSE_GET_MAX_LOGINS(scsi_id->query_logins_response->length_max_logins);
-	SBP2_DEBUG("Maximum concurrent logins supported: %d", max_logins);
+	SBP2_INFO("Maximum concurrent logins supported: %d", max_logins);
 
 	active_logins = RESPONSE_GET_ACTIVE_LOGINS(scsi_id->query_logins_response->length_max_logins);
-	SBP2_DEBUG("Number of active logins: %d", active_logins);
+	SBP2_INFO("Number of active logins: %d", active_logins);
 
 	if (active_logins >= max_logins) {
 		return -EIO;
@@ -1648,6 +1649,8 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
 	}
 }
 
+#define SBP2_PAYLOAD_TO_BYTES(p) (1 << ((p) + 2))
+
 /*
  * This function is called in order to determine the max speed and packet
  * size we can use in our ORBs. Note, that we (the driver and host) only
@@ -1660,13 +1663,12 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
 static int sbp2_max_speed_and_size(struct scsi_id_instance_data *scsi_id)
 {
 	struct sbp2scsi_host_info *hi = scsi_id->hi;
+	u8 payload;
 
 	SBP2_DEBUG_ENTER();
 
-	/* Initial setting comes from the hosts speed map */
 	scsi_id->speed_code =
-	    hi->host->speed_map[NODEID_TO_NODE(hi->host->node_id) * 64 +
-				NODEID_TO_NODE(scsi_id->ne->nodeid)];
+	    hi->host->speed[NODEID_TO_NODE(scsi_id->ne->nodeid)];
 
 	/* Bump down our speed if the user requested it */
 	if (scsi_id->speed_code > max_speed) {
@@ -1677,15 +1679,22 @@ static int sbp2_max_speed_and_size(struct scsi_id_instance_data *scsi_id)
 
 	/* Payload size is the lesser of what our speed supports and what
 	 * our host supports.  */
-	scsi_id->max_payload_size =
-	    min(sbp2_speedto_max_payload[scsi_id->speed_code],
+	payload = min(sbp2_speedto_max_payload[scsi_id->speed_code],
 		      (u8) (hi->host->csr.max_rec - 1));
 
+	/* If physical DMA is off, work around limitation in ohci1394:
+	 * packet size must not exceed PAGE_SIZE */
+	if (scsi_id->ne->host->low_addr_space < (1ULL << 32))
+		while (SBP2_PAYLOAD_TO_BYTES(payload) + 24 > PAGE_SIZE &&
+		       payload)
+			payload--;
+
 	HPSB_DEBUG("Node " NODE_BUS_FMT ": Max speed [%s] - Max payload [%u]",
 		   NODE_BUS_ARGS(hi->host, scsi_id->ne->nodeid),
 		   hpsb_speedto_str[scsi_id->speed_code],
-		   1 << ((u32) scsi_id->max_payload_size + 2));
+		   SBP2_PAYLOAD_TO_BYTES(payload));
 
+	scsi_id->max_payload_size = payload;
 	return 0;
 }
 
@@ -2112,33 +2121,6 @@ static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, unchar *sense
 	return sbp2_status[8] & 0x3f;	/* return scsi status */
 }
 
-/*
- * This function is called after a command is completed, in order to do any necessary SBP-2
- * response data translations for the SCSI stack
- */
-static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id,
-				     struct scsi_cmnd *SCpnt)
-{
-	u8 *scsi_buf = SCpnt->request_buffer;
-
-	SBP2_DEBUG_ENTER();
-
-	if (SCpnt->cmnd[0] == INQUIRY && (SCpnt->cmnd[1] & 3) == 0) {
-		/*
-		 * Make sure data length is ok. Minimum length is 36 bytes
-		 */
-		if (scsi_buf[4] == 0) {
-			scsi_buf[4] = 36 - 5;
-		}
-
-		/*
-		 * Fix ansi revision and response data format
-		 */
-		scsi_buf[2] |= 2;
-		scsi_buf[3] = (scsi_buf[3] & 0xf0) | 2;
-	}
-}
-
 /*
  * This function deals with status writes from the SBP-2 device
  */
@@ -2477,13 +2459,6 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id,
 		SCpnt->result = DID_ERROR << 16;
 	}
 
-	/*
-	 * Take care of any sbp2 response data mucking here (RBC stuff, etc.)
-	 */
-	if (SCpnt->result == DID_OK << 16) {
-		sbp2_check_sbp2_response(scsi_id, SCpnt);
-	}
-
 	/*
 	 * If a bus reset is in progress and there was an error, complete
 	 * the command as busy so that it will get retried.

drivers/ieee1394/sbp2.h

@@ -52,7 +52,7 @@ struct sbp2_command_orb {
 	u32 data_descriptor_lo;
 	u32 misc;
 	u8 cdb[12];
-};
+} __attribute__((packed));
 
 #define SBP2_LOGIN_REQUEST		0x0
 #define SBP2_QUERY_LOGINS_REQUEST	0x1
@@ -80,7 +80,7 @@ struct sbp2_login_orb {
 	u32 passwd_resp_lengths;
 	u32 status_fifo_hi;
 	u32 status_fifo_lo;
-};
+} __attribute__((packed));
 
 #define RESPONSE_GET_LOGIN_ID(value)            (value & 0xffff)
 #define RESPONSE_GET_LENGTH(value)              ((value >> 16) & 0xffff)
@@ -91,7 +91,7 @@ struct sbp2_login_response {
 	u32 command_block_agent_hi;
 	u32 command_block_agent_lo;
 	u32 reconnect_hold;
-};
+} __attribute__((packed));
 
 #define ORB_SET_LOGIN_ID(value)                 (value & 0xffff)
 
@@ -106,7 +106,7 @@ struct sbp2_query_logins_orb {
 	u32 reserved_resp_length;
 	u32 status_fifo_hi;
 	u32 status_fifo_lo;
-};
+} __attribute__((packed));
 
 #define RESPONSE_GET_MAX_LOGINS(value)          (value & 0xffff)
 #define RESPONSE_GET_ACTIVE_LOGINS(value)       ((RESPONSE_GET_LENGTH(value) - 4) / 12)
@@ -116,7 +116,7 @@ struct sbp2_query_logins_response {
 	u32 misc_IDs;
 	u32 initiator_misc_hi;
 	u32 initiator_misc_lo;
-};
+} __attribute__((packed));
 
 struct sbp2_reconnect_orb {
 	u32 reserved1;
@@ -127,7 +127,7 @@ struct sbp2_reconnect_orb {
 	u32 reserved5;
 	u32 status_fifo_hi;
 	u32 status_fifo_lo;
-};
+} __attribute__((packed));
 
 struct sbp2_logout_orb {
 	u32 reserved1;
@@ -138,7 +138,7 @@ struct sbp2_logout_orb {
 	u32 reserved5;
 	u32 status_fifo_hi;
 	u32 status_fifo_lo;
-};
+} __attribute__((packed));
 
 #define PAGE_TABLE_SET_SEGMENT_BASE_HI(value)   (value & 0xffff)
 #define PAGE_TABLE_SET_SEGMENT_LENGTH(value)    ((value & 0xffff) << 16)
@@ -146,7 +146,7 @@ struct sbp2_logout_orb {
 struct sbp2_unrestricted_page_table {
 	u32 length_segment_base_hi;
 	u32 segment_base_lo;
-};
+} __attribute__((packed));
 
 #define RESP_STATUS_REQUEST_COMPLETE		0x0
 #define RESP_STATUS_TRANSPORT_FAILURE		0x1
@@ -191,7 +191,7 @@ struct sbp2_status_block {
 	u32 ORB_offset_hi_misc;
 	u32 ORB_offset_lo;
 	u8 command_set_dependent[24];
-};
+} __attribute__((packed));
 
 /*
  * Miscellaneous SBP2 related config rom defines
@@ -395,9 +395,8 @@ static int sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id,
 static int sbp2_send_command(struct scsi_id_instance_data *scsi_id,
 			     struct scsi_cmnd *SCpnt,
 			     void (*done)(struct scsi_cmnd *));
-static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, unchar *sense_data);
-static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id,
-				     struct scsi_cmnd *SCpnt);
+static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status,
+					      unchar *sense_data);
 static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
 				      struct unit_directory *ud);
 static int sbp2_set_busy_timeout(struct scsi_id_instance_data *scsi_id);

drivers/ieee1394/video1394.c

@@ -331,7 +331,7 @@ alloc_dma_iso_ctx(struct ti_ohci *ohci, int type, int num_desc,
 
         spin_lock_init(&d->lock);
 
-	PRINT(KERN_INFO, ohci->host->id, "Iso %s DMA: %d buffers "
+	DBGMSG(ohci->host->id, "Iso %s DMA: %d buffers "
 	      "of size %d allocated for a frame size %d, each with %d prgs",
 	      (type == OHCI_ISO_RECEIVE) ? "receive" : "transmit",
 	      d->num_desc - 1, d->buf_size, d->frame_size, d->nb_cmd);
@@ -759,7 +759,7 @@ static int __video1394_ioctl(struct file *file,
 		} else {
 			mask = (u64)0x1<<v.channel;
 		}
-		PRINT(KERN_INFO, ohci->host->id, "mask: %08X%08X usage: %08X%08X\n",
+		DBGMSG(ohci->host->id, "mask: %08X%08X usage: %08X%08X\n",
 			(u32)(mask>>32),(u32)(mask&0xffffffff),
 			(u32)(ohci->ISO_channel_usage>>32),
 			(u32)(ohci->ISO_channel_usage&0xffffffff));
@@ -805,7 +805,7 @@ static int __video1394_ioctl(struct file *file,
 			v.buf_size = d->buf_size;
 			list_add_tail(&d->link, &ctx->context_list);
 
-			PRINT(KERN_INFO, ohci->host->id,
+			DBGMSG(ohci->host->id,
 			      "iso context %d listen on channel %d",
 			      d->ctx, v.channel);
 		}
@@ -828,7 +828,7 @@ static int __video1394_ioctl(struct file *file,
 
 			list_add_tail(&d->link, &ctx->context_list);
 
-			PRINT(KERN_INFO, ohci->host->id,
+			DBGMSG(ohci->host->id,
 			      "Iso context %d talk on channel %d", d->ctx,
 			      v.channel);
 		}
@@ -873,7 +873,7 @@ static int __video1394_ioctl(struct file *file,
 			d = find_ctx(&ctx->context_list, OHCI_ISO_TRANSMIT, channel);
 
 		if (d == NULL) return -ESRCH;
-		PRINT(KERN_INFO, ohci->host->id, "Iso context %d "
+		DBGMSG(ohci->host->id, "Iso context %d "
 		      "stop talking on channel %d", d->ctx, channel);
 		free_dma_iso_ctx(d);
 
@@ -935,7 +935,7 @@ static int __video1394_ioctl(struct file *file,
 		else {
 			/* Wake up dma context if necessary */
 			if (!(reg_read(ohci, d->ctrlSet) & 0x400)) {
-				PRINT(KERN_INFO, ohci->host->id,
+				DBGMSG(ohci->host->id,
 				      "Waking up iso dma ctx=%d", d->ctx);
 				reg_write(ohci, d->ctrlSet, 0x1000);
 			}
@@ -1106,7 +1106,7 @@ static int __video1394_ioctl(struct file *file,
 		else {
 			/* Wake up dma context if necessary */
 			if (!(reg_read(ohci, d->ctrlSet) & 0x400)) {
-				PRINT(KERN_INFO, ohci->host->id,
+				DBGMSG(ohci->host->id,
 				      "Waking up iso transmit dma ctx=%d",
 				      d->ctx);
 				put_timestamp(ohci, d, d->last_buffer);
@@ -1232,7 +1232,7 @@ static int video1394_release(struct inode *inode, struct file *file)
 			      "is not being used", d->channel);
 		else
 			ohci->ISO_channel_usage &= ~mask;
-		PRINT(KERN_INFO, ohci->host->id, "On release: Iso %s context "
+		DBGMSG(ohci->host->id, "On release: Iso %s context "
 		      "%d stop listening on channel %d",
 		      d->type == OHCI_ISO_RECEIVE ? "receive" : "transmit",
 		      d->ctx, d->channel);