Skip to content

L
linux
Commit 34fbd2b1 authored by Geert Uytterhoeven's avatar Geert Uytterhoeven Committed by Simon Horman
Browse files
Options

ARM: dts: r8a7790: Add reset control properties 

Add properties to describe the reset topology for on-SoC devices:
  - Add the "#reset-cells" property to the CPG/MSSR device node,
  - Add resets and reset-names properties to the various device nodes.

This allows to reset SoC devices using the Reset Controller API.

Note that resets usually match the corresponding module clocks.
Exceptions are:
  - The audio module has resets for the Serial Sound Interfaces only,
  - The display module has only a single reset for all DU channels, but
    adding reset properties for the display is postponed.
Signed-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
parent f523405f
Hide whitespace changes
Inline Side-by-side
Showing with 76 additions and 0 deletions
arch/arm/boot/dts/r8a7790.dtsi
View file @ 34fbd2b1
......@@ -188,6 +188,7 @@ gic: interrupt-controller@f1001000 {
clocks = <&cpg CPG_MOD 408>;
clock-names = "clk";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 408>;
};
gpio0: gpio@e6050000 {
......@@ -201,6 +202,7 @@ gpio0: gpio@e6050000 {
interrupt-controller;
clocks = <&cpg CPG_MOD 912>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 912>;
};
gpio1: gpio@e6051000 {
......@@ -214,6 +216,7 @@ gpio1: gpio@e6051000 {
interrupt-controller;
clocks = <&cpg CPG_MOD 911>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 911>;
};
gpio2: gpio@e6052000 {
......@@ -227,6 +230,7 @@ gpio2: gpio@e6052000 {
interrupt-controller;
clocks = <&cpg CPG_MOD 910>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 910>;
};
gpio3: gpio@e6053000 {
......@@ -240,6 +244,7 @@ gpio3: gpio@e6053000 {
interrupt-controller;
clocks = <&cpg CPG_MOD 909>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 909>;
};
gpio4: gpio@e6054000 {
......@@ -253,6 +258,7 @@ gpio4: gpio@e6054000 {
interrupt-controller;
clocks = <&cpg CPG_MOD 908>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 908>;
};
gpio5: gpio@e6055000 {
......@@ -266,6 +272,7 @@ gpio5: gpio@e6055000 {
interrupt-controller;
clocks = <&cpg CPG_MOD 907>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 907>;
};
thermal: thermal@e61f0000 {
......@@ -276,6 +283,7 @@ thermal: thermal@e61f0000 {
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 522>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 522>;
#thermal-sensor-cells = <0>;
};
......@@ -295,6 +303,7 @@ cmt0: timer@ffca0000 {
clocks = <&cpg CPG_MOD 124>;
clock-names = "fck";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 124>;
renesas,channels-mask = <0x60>;
......@@ -315,6 +324,7 @@ cmt1: timer@e6130000 {
clocks = <&cpg CPG_MOD 329>;
clock-names = "fck";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 329>;
renesas,channels-mask = <0xff>;
......@@ -332,6 +342,7 @@ irqc0: interrupt-controller@e61c0000 {
<GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 407>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 407>;
};
dmac0: dma-controller@e6700000 {
......@@ -361,6 +372,7 @@ GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
clocks = <&cpg CPG_MOD 219>;
clock-names = "fck";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 219>;
#dma-cells = <1>;
dma-channels = <15>;
};
......@@ -392,6 +404,7 @@ GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
clocks = <&cpg CPG_MOD 218>;
clock-names = "fck";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <15>;
};
......@@ -421,6 +434,7 @@ GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
clocks = <&cpg CPG_MOD 502>;
clock-names = "fck";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 502>;
#dma-cells = <1>;
dma-channels = <13>;
};
......@@ -450,6 +464,7 @@ GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
clocks = <&cpg CPG_MOD 501>;
clock-names = "fck";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 501>;
#dma-cells = <1>;
dma-channels = <13>;
};
......@@ -462,6 +477,7 @@ usb_dmac0: dma-controller@e65a0000 {
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 330>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 330>;
#dma-cells = <1>;
dma-channels = <2>;
};
......@@ -474,6 +490,7 @@ usb_dmac1: dma-controller@e65b0000 {
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 331>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 331>;
#dma-cells = <1>;
dma-channels = <2>;
};
......@@ -486,6 +503,7 @@ i2c0: i2c@e6508000 {
interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 931>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 931>;
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
......@@ -498,6 +516,7 @@ i2c1: i2c@e6518000 {
interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 930>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 930>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
......@@ -510,6 +529,7 @@ i2c2: i2c@e6530000 {
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 929>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 929>;
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
};
......@@ -522,6 +542,7 @@ i2c3: i2c@e6540000 {
interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 928>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 928>;
i2c-scl-internal-delay-ns = <110>;
status = "disabled";
};
......@@ -538,6 +559,7 @@ iic0: i2c@e6500000 {
<&dmac1 0x61>, <&dmac1 0x62>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 318>;
status = "disabled";
};
......@@ -553,6 +575,7 @@ iic1: i2c@e6510000 {
<&dmac1 0x65>, <&dmac1 0x66>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 323>;
status = "disabled";
};
......@@ -568,6 +591,7 @@ iic2: i2c@e6520000 {
<&dmac1 0x69>, <&dmac1 0x6a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 300>;
status = "disabled";
};
......@@ -583,6 +607,7 @@ iic3: i2c@e60b0000 {
<&dmac1 0x77>, <&dmac1 0x78>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 926>;
status = "disabled";
};
......@@ -595,6 +620,7 @@ mmcif0: mmc@ee200000 {
<&dmac1 0xd1>, <&dmac1 0xd2>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 315>;
reg-io-width = <4>;
status = "disabled";
max-frequency = <97500000>;
......@@ -609,6 +635,7 @@ mmcif1: mmc@ee220000 {
<&dmac1 0xe1>, <&dmac1 0xe2>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 305>;
reg-io-width = <4>;
status = "disabled";
max-frequency = <97500000>;
......@@ -629,6 +656,7 @@ sdhi0: sd@ee100000 {
dma-names = "tx", "rx", "tx", "rx";
max-frequency = <195000000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 314>;
status = "disabled";
};
......@@ -642,6 +670,7 @@ sdhi1: sd@ee120000 {
dma-names = "tx", "rx", "tx", "rx";
max-frequency = <195000000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 313>;
status = "disabled";
};
......@@ -655,6 +684,7 @@ sdhi2: sd@ee140000 {
dma-names = "tx", "rx", "tx", "rx";
max-frequency = <97500000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 312>;
status = "disabled";
};
......@@ -668,6 +698,7 @@ sdhi3: sd@ee160000 {
dma-names = "tx", "rx", "tx", "rx";
max-frequency = <97500000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 311>;
status = "disabled";
};
......@@ -682,6 +713,7 @@ scifa0: serial@e6c40000 {
<&dmac1 0x21>, <&dmac1 0x22>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 204>;
status = "disabled";
};
......@@ -696,6 +728,7 @@ scifa1: serial@e6c50000 {
<&dmac1 0x25>, <&dmac1 0x26>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 203>;
status = "disabled";
};
......@@ -710,6 +743,7 @@ scifa2: serial@e6c60000 {
<&dmac1 0x27>, <&dmac1 0x28>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 202>;
status = "disabled";
};
......@@ -724,6 +758,7 @@ scifb0: serial@e6c20000 {
<&dmac1 0x3d>, <&dmac1 0x3e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 206>;
status = "disabled";
};
......@@ -738,6 +773,7 @@ scifb1: serial@e6c30000 {
<&dmac1 0x19>, <&dmac1 0x1a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 207>;
status = "disabled";
};
......@@ -752,6 +788,7 @@ scifb2: serial@e6ce0000 {
<&dmac1 0x1d>, <&dmac1 0x1e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 216>;
status = "disabled";
};
......@@ -767,6 +804,7 @@ scif0: serial@e6e60000 {
<&dmac1 0x29>, <&dmac1 0x2a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 721>;
status = "disabled";
};
......@@ -782,6 +820,7 @@ scif1: serial@e6e68000 {
<&dmac1 0x2d>, <&dmac1 0x2e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 720>;
status = "disabled";
};
......@@ -797,6 +836,7 @@ scif2: serial@e6e56000 {
<&dmac1 0x2b>, <&dmac1 0x2c>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 310>;
status = "disabled";
};
......@@ -812,6 +852,7 @@ hscif0: serial@e62c0000 {
<&dmac1 0x39>, <&dmac1 0x3a>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 717>;
status = "disabled";
};
......@@ -827,6 +868,7 @@ hscif1: serial@e62c8000 {
<&dmac1 0x4d>, <&dmac1 0x4e>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 716>;
status = "disabled";
};
......@@ -854,6 +896,7 @@ ether: ethernet@ee700000 {
interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 813>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 813>;
phy-mode = "rmii";
#address-cells = <1>;
#size-cells = <0>;
......@@ -867,6 +910,7 @@ avb: ethernet@e6800000 {
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 812>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 812>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
......@@ -878,6 +922,7 @@ sata0: sata@ee300000 {
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 815>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 815>;
status = "disabled";
};
......@@ -887,6 +932,7 @@ sata1: sata@ee500000 {
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 814>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 814>;
status = "disabled";
};
......@@ -899,6 +945,7 @@ hsusb: usb@e6590000 {
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 704>;
renesas,buswait = <4>;
phys = <&usb0 1>;
phy-names = "usb";
......@@ -914,6 +961,7 @@ usbphy: usb-phy@e6590100 {
clocks = <&cpg CPG_MOD 704>;
clock-names = "usbhs";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 704>;
status = "disabled";
usb0: usb-channel@0 {
......@@ -932,6 +980,7 @@ vin0: video@e6ef0000 {
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 811>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 811>;
status = "disabled";
};
......@@ -941,6 +990,7 @@ vin1: video@e6ef1000 {
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 810>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 810>;
status = "disabled";
};
......@@ -950,6 +1000,7 @@ vin2: video@e6ef2000 {
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 809>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 809>;
status = "disabled";
};
......@@ -959,6 +1010,7 @@ vin3: video@e6ef3000 {
interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 808>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 808>;
status = "disabled";
};
......@@ -968,6 +1020,7 @@ vsp1@fe920000 {
interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 130>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 130>;
};
vsp1@fe928000 {
......@@ -976,6 +1029,7 @@ vsp1@fe928000 {
interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 131>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 131>;
};
vsp1@fe930000 {
......@@ -984,6 +1038,7 @@ vsp1@fe930000 {
interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 128>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 128>;
};
vsp1@fe938000 {
......@@ -992,6 +1047,7 @@ vsp1@fe938000 {
interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 127>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 127>;
};
du: display@feb00000 {
......@@ -1039,6 +1095,7 @@ can0: can@e6e80000 {
<&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 916>;
status = "disabled";
};
......@@ -1050,6 +1107,7 @@ can1: can@e6e88000 {
<&can_clk>;
clock-names = "clkp1", "clkp2", "can_clk";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 915>;
status = "disabled";
};
......@@ -1059,6 +1117,7 @@ jpu: jpeg-codec@fe980000 {
interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 106>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 106>;
};
/* External root clock */
......@@ -1154,6 +1213,7 @@ qspi: spi@e6b10000 {
<&dmac1 0x17>, <&dmac1 0x18>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 917>;
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
......@@ -1170,6 +1230,7 @@ msiof0: spi@e6e20000 {
<&dmac1 0x51>, <&dmac1 0x52>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 0>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
......@@ -1185,6 +1246,7 @@ msiof1: spi@e6e10000 {
<&dmac1 0x55>, <&dmac1 0x56>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 208>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
......@@ -1200,6 +1262,7 @@ msiof2: spi@e6e00000 {
<&dmac1 0x41>, <&dmac1 0x42>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 205>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
......@@ -1215,6 +1278,7 @@ msiof3: spi@e6c90000 {
<&dmac1 0x45>, <&dmac1 0x46>;
dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 215>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
......@@ -1226,6 +1290,7 @@ xhci: usb@ee000000 {
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 328>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 328>;
phys = <&usb2 1>;
phy-names = "usb";
status = "disabled";
......@@ -1239,6 +1304,7 @@ pci0: pci@ee090000 {
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 703>;
status = "disabled";
bus-range = <0 0>;
......@@ -1272,6 +1338,7 @@ pci1: pci@ee0b0000 {
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 703>;
status = "disabled";
bus-range = <1 1>;
......@@ -1290,6 +1357,7 @@ pci2: pci@ee0d0000 {
device_type = "pci";
clocks = <&cpg CPG_MOD 703>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 703>;
reg = <0 0xee0d0000 0 0xc00>,
<0 0xee0c0000 0 0x1100>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
......@@ -1341,6 +1409,7 @@ pciec: pcie@fe000000 {
clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
clock-names = "pcie", "pcie_bus";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 319>;
status = "disabled";
};
......@@ -1385,6 +1454,13 @@ rcar_sound: sound@ec500000 {
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 1005>,
<&cpg 1006>, <&cpg 1007>, <&cpg 1008>, <&cpg 1009>,
<&cpg 1010>, <&cpg 1011>, <&cpg 1012>, <&cpg 1013>,
<&cpg 1014>, <&cpg 1015>;
reset-names = "ssi-all",
"ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
"ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0";
status = "disabled";
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7