Commit 34fe2784 authored by Ondrej Zary's avatar Ondrej Zary Committed by Mauro Carvalho Chehab

[media] saa7134: Add AverMedia A706 AverTV Satellite Hybrid+FM

Add AverMedia AverTV Satellite Hybrid+FM (A706) card to saa7134 driver.
Working: analog inputs, TV, FM radio and IR remote control.
Untested: DVB-S.
Signed-off-by: default avatarOndrej Zary <linux@rainbow-software.org>
Signed-off-by: default avatarMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent cdcd141c
......@@ -230,7 +230,7 @@ static int get_key_avermedia_cardbus(struct IR_i2c *ir,
return 0;
dprintk(1, "read key 0x%02x/0x%02x\n", key, keygroup);
if (keygroup < 2 || keygroup > 3) {
if (keygroup < 2 || keygroup > 4) {
/* Only a warning */
dprintk(1, "warning: invalid key group 0x%02x for key 0x%02x\n",
keygroup, key);
......@@ -239,6 +239,10 @@ static int get_key_avermedia_cardbus(struct IR_i2c *ir,
*ir_key = key;
*ir_raw = key;
if (!strcmp(ir->ir_codes, RC_MAP_AVERMEDIA_M733A_RM_K6)) {
*ir_key |= keygroup << 8;
*ir_raw |= keygroup << 8;
}
return 1;
}
......@@ -332,6 +336,13 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
rc_type = RC_BIT_OTHER;
ir_codes = RC_MAP_AVERMEDIA_CARDBUS;
break;
case 0x41:
name = "AVerMedia EM78P153";
ir->get_key = get_key_avermedia_cardbus;
rc_type = RC_BIT_OTHER;
/* RM-KV remote, seems to be same as RM-K6 */
ir_codes = RC_MAP_AVERMEDIA_M733A_RM_K6;
break;
case 0x71:
name = "Hauppauge/Zilog Z8";
ir->get_key = get_key_haup_xvr;
......
......@@ -50,6 +50,11 @@ static char name_svideo[] = "S-Video";
/* ------------------------------------------------------------------ */
/* board config info */
static struct tda18271_std_map aver_a706_std_map = {
.fm_radio = { .if_freq = 5500, .fm_rfn = 0, .agc_mode = 3, .std = 0,
.if_lvl = 0, .rfagc_top = 0x2c, },
};
/* If radio_type !=UNSET, radio_addr should be specified
*/
......@@ -5790,6 +5795,37 @@ struct saa7134_board saa7134_boards[] = {
.gpio = 0x6010000,
} },
},
[SAA7134_BOARD_AVERMEDIA_A706] = {
.name = "AverMedia AverTV Satellite Hybrid+FM A706",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_TDA8290,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tda829x_conf = { .lna_cfg = 0, .no_i2c_gate = 1,
.tda18271_std_map = &aver_a706_std_map },
.gpiomask = 1 << 11,
.mpeg = SAA7134_MPEG_DVB,
.inputs = {{
.name = name_tv,
.vmux = 1,
.amux = TV,
.tv = 1,
}, {
.name = name_comp,
.vmux = 4,
.amux = LINE1,
}, {
.name = name_svideo,
.vmux = 8,
.amux = LINE1,
} },
.radio = {
.name = name_radio,
.amux = TV,
.gpio = 0x0000800,
},
},
};
......@@ -7036,6 +7072,12 @@ struct pci_device_id saa7134_pci_tbl[] = {
.subvendor = 0x6000,
.subdevice = 0x0911,
.driver_data = SAA7134_BOARD_SENSORAY811_911,
}, {
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x1461, /* Avermedia Technologies Inc */
.subdevice = 0x2055, /* AverTV Satellite Hybrid+FM A706 */
.driver_data = SAA7134_BOARD_AVERMEDIA_A706,
}, {
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
......@@ -7585,6 +7627,17 @@ int saa7134_board_init1(struct saa7134_dev *dev)
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x80040100, 0x80040100);
saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x80040100, 0x00040100);
break;
case SAA7134_BOARD_AVERMEDIA_A706:
/* radio antenna select: tristate both as in Windows driver */
saa7134_set_gpio(dev, 12, 3); /* TV antenna */
saa7134_set_gpio(dev, 13, 3); /* FM antenna */
dev->has_remote = SAA7134_REMOTE_I2C;
/*
* Disable CE5039 DVB-S tuner now (SLEEP pin high) to prevent
* it from interfering with analog tuner detection
*/
saa7134_set_gpio(dev, 23, 1);
break;
case SAA7134_BOARD_VIDEOMATE_S350:
dev->has_remote = SAA7134_REMOTE_GPIO;
saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x0000C000, 0x0000C000);
......
......@@ -1073,6 +1073,10 @@ static struct mt312_config zl10313_compro_s350_config = {
.demod_address = 0x0e,
};
static struct mt312_config zl10313_avermedia_a706_config = {
.demod_address = 0x0e,
};
static struct lgdt3305_config hcw_lgdt3305_config = {
.i2c_addr = 0x0e,
.mpeg_mode = LGDT3305_MPEG_SERIAL,
......@@ -1822,6 +1826,25 @@ static int dvb_init(struct saa7134_dev *dev)
&prohdtv_pro2_tda18271_config);
}
break;
case SAA7134_BOARD_AVERMEDIA_A706:
/* Enable all DVB-S devices now */
/* CE5039 DVB-S tuner SLEEP pin low */
saa7134_set_gpio(dev, 23, 0);
/* CE6313 DVB-S demod SLEEP pin low */
saa7134_set_gpio(dev, 9, 0);
/* CE6313 DVB-S demod RESET# pin high */
saa7134_set_gpio(dev, 25, 1);
msleep(1);
fe0->dvb.frontend = dvb_attach(mt312_attach,
&zl10313_avermedia_a706_config, &dev->i2c_adap);
if (fe0->dvb.frontend) {
fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL;
if (dvb_attach(zl10039_attach, fe0->dvb.frontend,
0x60, &dev->i2c_adap) == NULL)
wprintk("%s: No zl10039 found!\n",
__func__);
}
break;
default:
wprintk("Huh? unknown DVB card?\n");
break;
......
......@@ -256,6 +256,7 @@ static int saa7134_i2c_xfer(struct i2c_adapter *i2c_adap,
addr |= 1;
if (i > 0 && msgs[i].flags &
I2C_M_RD && msgs[i].addr != 0x40 &&
msgs[i].addr != 0x41 &&
msgs[i].addr != 0x19) {
/* workaround for a saa7134 i2c bug
* needed to talk to the mt352 demux
......
......@@ -997,6 +997,9 @@ void saa7134_probe_i2c_ir(struct saa7134_dev *dev)
case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
info.addr = 0x40;
break;
case SAA7134_BOARD_AVERMEDIA_A706:
info.addr = 0x41;
break;
case SAA7134_BOARD_FLYDVB_TRIO:
dev->init_data.name = "FlyDVB Trio";
dev->init_data.get_key = get_key_flydvb_trio;
......
......@@ -796,6 +796,7 @@ static int tvaudio_thread_ddep(void *data)
dprintk("FM Radio\n");
if (dev->tuner_type == TUNER_PHILIPS_TDA8290) {
norms = (0x11 << 2) | 0x01;
/* set IF frequency to 5.5 MHz */
saa_dsp_writel(dev, 0x42c >> 2, 0x729555);
} else {
norms = (0x0f << 2) | 0x01;
......
......@@ -335,6 +335,7 @@ struct saa7134_card_ir {
#define SAA7134_BOARD_KWORLD_PC150U 189
#define SAA7134_BOARD_ASUSTeK_PS3_100 190
#define SAA7134_BOARD_HAWELL_HW_9004V1 191
#define SAA7134_BOARD_AVERMEDIA_A706 192
#define SAA7134_MAXBOARDS 32
#define SAA7134_INPUT_MAX 8
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment