ixgbe: Don't give VFs random MAC addresses

If the user has not assigned a MAC address to a VM, then don't give it a
random one. Instead, just give it zeros and let it figure out what to do
with them.
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c

@@ -661,13 +661,7 @@ int ixgbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask)
 	bool enable = ((event_mask & 0x10000000U) != 0);
 
 	if (enable) {
-		eth_random_addr(vf_mac_addr);
-		e_info(probe, "IOV: VF %d is enabled MAC %pM\n",
-		       vfn, vf_mac_addr);
-		/*
-		 * Store away the VF "permananet" MAC address, it will ask
-		 * for it later.
-		 */
+		eth_zero_addr(vf_mac_addr);
 		memcpy(adapter->vfinfo[vfn].vf_mac_addresses, vf_mac_addr, 6);
 	}
 
@@ -688,6 +682,7 @@ static int ixgbe_vf_reset_msg(struct ixgbe_adapter *adapter, u32 vf)
 	ixgbe_vf_reset_event(adapter, vf);
 
 	/* set vf mac address */
+	if (!is_zero_ether_addr(vf_mac))
 		ixgbe_set_vf_mac(adapter, vf, vf_mac);
 
 	vf_shift = vf % 32;
@@ -729,8 +724,16 @@ static int ixgbe_vf_reset_msg(struct ixgbe_adapter *adapter, u32 vf)
 	IXGBE_WRITE_REG(hw, IXGBE_VMECM(reg_offset), reg);
 
 	/* reply to reset with ack and vf mac address */
-	msgbuf[0] = IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_ACK;
+	msgbuf[0] = IXGBE_VF_RESET;
+	if (!is_zero_ether_addr(vf_mac)) {
+		msgbuf[0] |= IXGBE_VT_MSGTYPE_ACK;
 		memcpy(addr, vf_mac, ETH_ALEN);
+	} else {
+		msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK;
+		dev_warn(&adapter->pdev->dev,
+			 "VF %d has no MAC address assigned, you may have to assign one manually\n",
+			 vf);
+	}
 
 	/*
 	 * Piggyback the multicast filter type so VF can compute the