Skip to content

L
linux
Commit 36a23fc8 authored by Paul Mackerras's avatar Paul Mackerras
Browse files
Options

Merge branch 'powerpc-next' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc

parents 23386fe5 fc215fe7
Show whitespace changes
Inline Side-by-side
Showing with 9 additions and 3514 deletions
arch/powerpc/kernel/cpu_setup_6xx.S
View file @ 36a23fc8
...@@ -17,7 +17,13 @@ ...@@ -17,7 +17,13 @@
#include <asm/cache.h> #include <asm/cache.h>
_GLOBAL(__setup_cpu_603) _GLOBAL(__setup_cpu_603)
b setup_common_caches mflr r4
BEGIN_FTR_SECTION
bl __init_fpu_registers
END_FTR_SECTION_IFCLR(CPU_FTR_FPU_UNAVAILABLE)
bl setup_common_caches
mtlr r4
blr
_GLOBAL(__setup_cpu_604) _GLOBAL(__setup_cpu_604)
mflr r4 mflr r4
bl setup_common_caches bl setup_common_caches
......
arch/ppc/8260_io/fcc_enet.c
View file @ 36a23fc8
...@@ -165,9 +165,6 @@ static int fcc_enet_set_mac_address(struct net_device *dev, void *addr); ...@@ -165,9 +165,6 @@ static int fcc_enet_set_mac_address(struct net_device *dev, void *addr);
#ifdef CONFIG_SBC82xx #ifdef CONFIG_SBC82xx
#define F1_RXCLK 9 #define F1_RXCLK 9
#define F1_TXCLK 10 #define F1_TXCLK 10
#elif defined(CONFIG_ADS8272)
#define F1_RXCLK 11
#define F1_TXCLK 10
#else #else
#define F1_RXCLK 12 #define F1_RXCLK 12
#define F1_TXCLK 11 #define F1_TXCLK 11
...@@ -175,13 +172,8 @@ static int fcc_enet_set_mac_address(struct net_device *dev, void *addr); ...@@ -175,13 +172,8 @@ static int fcc_enet_set_mac_address(struct net_device *dev, void *addr);
/* FCC2 Clock Source Configuration. There are board specific. /* FCC2 Clock Source Configuration. There are board specific.
Can only choose from CLK13-16 */ Can only choose from CLK13-16 */
#ifdef CONFIG_ADS8272
#define F2_RXCLK 15
#define F2_TXCLK 16
#else
#define F2_RXCLK 13 #define F2_RXCLK 13
#define F2_TXCLK 14 #define F2_TXCLK 14
#endif
/* FCC3 Clock Source Configuration. There are board specific. /* FCC3 Clock Source Configuration. There are board specific.
Can only choose from CLK13-16 */ Can only choose from CLK13-16 */
...@@ -289,10 +281,7 @@ static int fcc_enet_set_mac_address(struct net_device *dev, void *addr); ...@@ -289,10 +281,7 @@ static int fcc_enet_set_mac_address(struct net_device *dev, void *addr);
/* TQM8260 has MDIO and MDCK on PC30 and PC31 respectively */ /* TQM8260 has MDIO and MDCK on PC30 and PC31 respectively */
#define PC_MDIO ((uint)0x00000002) #define PC_MDIO ((uint)0x00000002)
#define PC_MDCK ((uint)0x00000001) #define PC_MDCK ((uint)0x00000001)
#elif defined(CONFIG_ADS8272) #elif defined(CONFIG_EST8260) || defined(CONFIG_ADS8260)
#define PC_MDIO ((uint)0x00002000)
#define PC_MDCK ((uint)0x00001000)
#elif defined(CONFIG_EST8260) || defined(CONFIG_ADS8260) || defined(CONFIG_PQ2FADS)
#define PC_MDIO ((uint)0x00400000) #define PC_MDIO ((uint)0x00400000)
#define PC_MDCK ((uint)0x00200000) #define PC_MDCK ((uint)0x00200000)
#else #else
...@@ -2118,11 +2107,6 @@ init_fcc_startup(fcc_info_t *fip, struct net_device *dev) ...@@ -2118,11 +2107,6 @@ init_fcc_startup(fcc_info_t *fip, struct net_device *dev)
printk("Can't get FCC IRQ %d\n", fip->fc_interrupt); printk("Can't get FCC IRQ %d\n", fip->fc_interrupt);
#ifdef PHY_INTERRUPT #ifdef PHY_INTERRUPT
#ifdef CONFIG_ADS8272
if (request_irq(PHY_INTERRUPT, mii_link_interrupt, IRQF_SHARED,
"mii", dev) < 0)
printk(KERN_CRIT "Can't get MII IRQ %d\n", PHY_INTERRUPT);
#else
/* Make IRQn edge triggered. This does not work if PHY_INTERRUPT is /* Make IRQn edge triggered. This does not work if PHY_INTERRUPT is
* on Port C. * on Port C.
*/ */
...@@ -2132,7 +2116,6 @@ init_fcc_startup(fcc_info_t *fip, struct net_device *dev) ...@@ -2132,7 +2116,6 @@ init_fcc_startup(fcc_info_t *fip, struct net_device *dev)
if (request_irq(PHY_INTERRUPT, mii_link_interrupt, 0, if (request_irq(PHY_INTERRUPT, mii_link_interrupt, 0,
"mii", dev) < 0) "mii", dev) < 0)
printk(KERN_CRIT "Can't get MII IRQ %d\n", PHY_INTERRUPT); printk(KERN_CRIT "Can't get MII IRQ %d\n", PHY_INTERRUPT);
#endif
#endif /* PHY_INTERRUPT */ #endif /* PHY_INTERRUPT */
/* Set GFMR to enable Ethernet operating mode. /* Set GFMR to enable Ethernet operating mode.
......
arch/ppc/8xx_io/enet.c
View file @ 36a23fc8
...@@ -946,29 +946,6 @@ static int __init scc_enet_init(void) ...@@ -946,29 +946,6 @@ static int __init scc_enet_init(void)
*((volatile uint *)BCSR1) &= ~BCSR1_ETHEN; *((volatile uint *)BCSR1) &= ~BCSR1_ETHEN;
#endif #endif
#ifdef CONFIG_MPC885ADS
/* Deassert PHY reset and enable the PHY.
*/
{
volatile uint __iomem *bcsr = ioremap(BCSR_ADDR, BCSR_SIZE);
uint tmp;
tmp = in_be32(bcsr + 1 /* BCSR1 */);
tmp |= BCSR1_ETHEN;
out_be32(bcsr + 1, tmp);
tmp = in_be32(bcsr + 4 /* BCSR4 */);
tmp |= BCSR4_ETH10_RST;
out_be32(bcsr + 4, tmp);
iounmap(bcsr);
}
/* On MPC885ADS SCC ethernet PHY defaults to the full duplex mode
* upon reset. SCC is set to half duplex by default. So this
* inconsistency should be better fixed by the software.
*/
#endif
dev->base_addr = (unsigned long)ep; dev->base_addr = (unsigned long)ep;
#if 0 #if 0
dev->name = "CPM_ENET"; dev->name = "CPM_ENET";
......
arch/ppc/Kconfig
View file @ 36a23fc8
...@@ -372,22 +372,6 @@ config MPC8XXFADS ...@@ -372,22 +372,6 @@ config MPC8XXFADS
bool "FADS" bool "FADS"
select FADS select FADS
config MPC86XADS
bool "MPC86XADS"
help
MPC86x Application Development System by Freescale Semiconductor.
The MPC86xADS is meant to serve as a platform for s/w and h/w
development around the MPC86X processor families.
select FADS
config MPC885ADS
bool "MPC885ADS"
help
Freescale Semiconductor MPC885 Application Development System (ADS).
Also known as DUET.
The MPC885ADS is meant to serve as a platform for s/w and h/w
development around the MPC885 processor family.
config TQM823L config TQM823L
bool "TQM823L" bool "TQM823L"
help help
...@@ -479,53 +463,6 @@ config WINCEPT ...@@ -479,53 +463,6 @@ config WINCEPT
endchoice endchoice
menu "Freescale Ethernet driver platform-specific options"
depends on FS_ENET
config MPC8xx_SECOND_ETH
bool "Second Ethernet channel"
depends on (MPC885ADS || MPC86XADS)
default y
help
This enables support for second Ethernet on MPC885ADS and MPC86xADS boards.
The latter will use SCC1, for 885ADS you can select it below.
choice
prompt "Second Ethernet channel"
depends on MPC8xx_SECOND_ETH
default MPC8xx_SECOND_ETH_FEC2
config MPC8xx_SECOND_ETH_FEC2
bool "FEC2"
depends on MPC885ADS
help
Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2
(often 2-nd UART) will not work if this is enabled.
config MPC8xx_SECOND_ETH_SCC1
bool "SCC1"
depends on MPC86XADS
select MPC8xx_SCC_ENET_FIXED
help
Enable SCC1 to serve as 2-nd Ethernet channel. Note that SMC1
(often 1-nd UART) will not work if this is enabled.
config MPC8xx_SECOND_ETH_SCC3
bool "SCC3"
depends on MPC885ADS
help
Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1
(often 1-nd UART) will not work if this is enabled.
endchoice
config MPC8xx_SCC_ENET_FIXED
depends on MPC8xx_SECOND_ETH_SCC
default n
bool "Use fixed MII-less mode for SCC Ethernet"
endmenu
choice choice
prompt "Machine Type" prompt "Machine Type"
depends on 6xx depends on 6xx
...@@ -666,9 +603,6 @@ config TQM8260 ...@@ -666,9 +603,6 @@ config TQM8260
End of Life: not yet :-) End of Life: not yet :-)
URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf> URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf>
config ADS8272
bool "ADS8272"
config PQ2FADS config PQ2FADS
bool "Freescale-PQ2FADS" bool "Freescale-PQ2FADS"
help help
...@@ -698,11 +632,6 @@ config EV64360 ...@@ -698,11 +632,6 @@ config EV64360
platform. platform.
endchoice endchoice
config PQ2ADS
bool
depends on ADS8272
default y
config TQM8xxL config TQM8xxL
bool bool
depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L) depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L)
...@@ -725,15 +654,6 @@ config 8260 ...@@ -725,15 +654,6 @@ config 8260
this option means that you wish to build a kernel for a machine with this option means that you wish to build a kernel for a machine with
an 8260 class CPU. an 8260 class CPU.
config 8272
bool
depends on 6xx
default y if ADS8272
select 8260
help
The MPC8272 CPM has a different internal dpram setup than other CPM2
devices
config CPM1 config CPM1
bool bool
depends on 8xx depends on 8xx
...@@ -1069,7 +989,7 @@ config PCI_8260 ...@@ -1069,7 +989,7 @@ config PCI_8260
config 8260_PCI9 config 8260_PCI9
bool "Enable workaround for MPC826x erratum PCI 9" bool "Enable workaround for MPC826x erratum PCI 9"
depends on PCI_8260 && !ADS8272 depends on PCI_8260
default y default y
choice choice
......
arch/ppc/configs/ads8272_defconfig deleted 100644 → 0
View file @ 23386fe5
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.21-rc5
# Wed Apr 4 20:55:16 2007
#
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_GENERIC_NVRAM=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_BUG=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor
#
CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_8xx is not set
# CONFIG_E200 is not set
# CONFIG_E500 is not set
CONFIG_PPC_FPU=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_KEXEC is not set
# CONFIG_CPU_FREQ is not set
# CONFIG_WANT_EARLY_SERIAL is not set
CONFIG_EMBEDDEDBOOT=y
CONFIG_PPC_STD_MMU=y
#
# Platform options
#
#
# Freescale Ethernet driver platform-specific options
#
# CONFIG_PPC_PREP is not set
# CONFIG_APUS is not set
# CONFIG_KATANA is not set
# CONFIG_WILLOW is not set
# CONFIG_CPCI690 is not set
# CONFIG_POWERPMC250 is not set
# CONFIG_CHESTNUT is not set
# CONFIG_SPRUCE is not set
# CONFIG_HDPU is not set
# CONFIG_EV64260 is not set
# CONFIG_LOPEC is not set
# CONFIG_MVME5100 is not set
# CONFIG_PPLUS is not set
# CONFIG_PRPMC750 is not set
# CONFIG_PRPMC800 is not set
# CONFIG_SANDPOINT is not set
# CONFIG_RADSTONE_PPC7D is not set
# CONFIG_PAL4 is not set
# CONFIG_EST8260 is not set
# CONFIG_SBC82xx is not set
# CONFIG_SBS8260 is not set
# CONFIG_RPX8260 is not set
# CONFIG_TQM8260 is not set
CONFIG_ADS8272=y
# CONFIG_PQ2FADS is not set
# CONFIG_LITE5200 is not set
# CONFIG_MPC834x_SYS is not set
# CONFIG_EV64360 is not set
CONFIG_PQ2ADS=y
CONFIG_8260=y
CONFIG_8272=y
CONFIG_CPM2=y
# CONFIG_PC_KEYBOARD is not set
# CONFIG_SMP is not set
# CONFIG_HIGHMEM is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
# CONFIG_PPC_I8259 is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_8260=y
#
# PCCARD (PCMCIA/CardBus) support
#
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_BOOT_LOAD=0x00400000
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNPACPI is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_NETLINK is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_WINDFARM is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
CONFIG_DAVICOM_PHY=y
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_FIXED_PHY is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
CONFIG_FS_ENET=y
# CONFIG_FS_ENET_HAS_SCC is not set
CONFIG_FS_ENET_HAS_FCC=y
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
CONFIG_SERIAL_CPM_SCC1=y
# CONFIG_SERIAL_CPM_SCC2 is not set
# CONFIG_SERIAL_CPM_SCC3 is not set
CONFIG_SERIAL_CPM_SCC4=y
# CONFIG_SERIAL_CPM_SMC1 is not set
# CONFIG_SERIAL_CPM_SMC2 is not set
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
# CONFIG_FB is not set
# CONFIG_FB_IBM_GXT4500 is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# HID Devices
#
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# Auxiliary Display support
#
#
# Virtualization
#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
# CONFIG_MSDOS_PARTITION is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
# CONFIG_NLS is not set
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
# CONFIG_SCC_ENET is not set
# CONFIG_FEC_ENET is not set
#
# CPM2 Options
#
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_KGDB_CONSOLE is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
#
# Hardware crypto devices
#
arch/ppc/configs/mpc86x_ads_defconfig deleted 100644 → 0
View file @ 23386fe5
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12-rc4
# Tue Jun 14 13:36:35 2005
#
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
# CONFIG_KALLSYMS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_SHMEM is not set
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=1
#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
#
# Processor
#
# CONFIG_6xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_POWER3 is not set
# CONFIG_POWER4 is not set
CONFIG_8xx=y
# CONFIG_E500 is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_CPU_FREQ is not set
CONFIG_EMBEDDEDBOOT=y
# CONFIG_PM is not set
CONFIG_NOT_COHERENT_CACHE=y
#
# Platform options
#
CONFIG_FADS=y
# CONFIG_RPXLITE is not set
# CONFIG_RPXCLASSIC is not set
# CONFIG_BSEIP is not set
# CONFIG_MPC8XXFADS is not set
CONFIG_MPC86XADS=y
# CONFIG_TQM823L is not set
# CONFIG_TQM850L is not set
# CONFIG_TQM855L is not set
# CONFIG_TQM860L is not set
# CONFIG_FPS850L is not set
# CONFIG_SPD823TS is not set
# CONFIG_IVMS8 is not set
# CONFIG_IVML24 is not set
# CONFIG_SM850 is not set
# CONFIG_HERMES_PRO is not set
# CONFIG_IP860 is not set
# CONFIG_LWMON is not set
# CONFIG_PCU_E is not set
# CONFIG_CCM is not set
# CONFIG_LANTEC is not set
# CONFIG_MBX is not set
# CONFIG_WINCEPT is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_HIGHMEM is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ISA_DMA_API=y
#
# Bus options
#
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_QSPAN is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_BOOT_LOAD=0x00400000
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
#
# Macintosh device drivers
#
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_OAKNET is not set
#
# Ethernet (1000 Mbit)
#
#
# Ethernet (10000 Mbit)
#
#
# Token Ring devices
#
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
# CONFIG_INPUT is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_CPM_SCC1 is not set
# CONFIG_SERIAL_CPM_SCC2 is not set
# CONFIG_SERIAL_CPM_SCC3 is not set
# CONFIG_SERIAL_CPM_SCC4 is not set
CONFIG_SERIAL_CPM_SMC1=y
# CONFIG_SERIAL_CPM_SMC2 is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
#
# I2C support
#
# CONFIG_I2C is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Misc devices
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
# CONFIG_NLS is not set
#
# MPC8xx CPM Options
#
CONFIG_SCC_ENET=y
CONFIG_SCC1_ENET=y
# CONFIG_SCC2_ENET is not set
# CONFIG_SCC3_ENET is not set
# CONFIG_FEC_ENET is not set
# CONFIG_ENET_BIG_BUFFERS is not set
#
# Generic MPC8xx Options
#
# CONFIG_8xx_COPYBACK is not set
# CONFIG_8xx_CPU6 is not set
CONFIG_NO_UCODE_PATCH=y
# CONFIG_USB_SOF_UCODE_PATCH is not set
# CONFIG_I2C_SPI_UCODE_PATCH is not set
# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
arch/ppc/configs/mpc885ads_defconfig deleted 100644 → 0
View file @ 23386fe5
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12-rc6
# Thu Jun 9 21:17:29 2005
#
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
# CONFIG_KALLSYMS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
# CONFIG_MODULES is not set
#
# Processor
#
# CONFIG_6xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_POWER3 is not set
# CONFIG_POWER4 is not set
CONFIG_8xx=y
# CONFIG_E500 is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_CPU_FREQ is not set
CONFIG_EMBEDDEDBOOT=y
# CONFIG_PM is not set
CONFIG_NOT_COHERENT_CACHE=y
#
# Platform options
#
# CONFIG_RPXLITE is not set
# CONFIG_RPXCLASSIC is not set
# CONFIG_BSEIP is not set
# CONFIG_FADS is not set
CONFIG_MPC885ADS=y
# CONFIG_TQM823L is not set
# CONFIG_TQM850L is not set
# CONFIG_TQM855L is not set
# CONFIG_TQM860L is not set
# CONFIG_FPS850L is not set
# CONFIG_SPD823TS is not set
# CONFIG_IVMS8 is not set
# CONFIG_IVML24 is not set
# CONFIG_SM850 is not set
# CONFIG_HERMES_PRO is not set
# CONFIG_IP860 is not set
# CONFIG_LWMON is not set
# CONFIG_PCU_E is not set
# CONFIG_CCM is not set
# CONFIG_LANTEC is not set
# CONFIG_MBX is not set
# CONFIG_WINCEPT is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_HIGHMEM is not set
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ISA_DMA_API=y
#
# Bus options
#
# CONFIG_PCI is not set
# CONFIG_PCI_DOMAINS is not set
# CONFIG_PCI_QSPAN is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_CONSISTENT_START=0xff100000
CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_BOOT_LOAD=0x00400000
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
#
# Macintosh device drivers
#
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_OAKNET is not set
#
# Ethernet (1000 Mbit)
#
#
# Ethernet (10000 Mbit)
#
#
# Token Ring devices
#
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_PPP_DEFLATE=y
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
# CONFIG_INPUT is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_CPM=y
CONFIG_SERIAL_CPM_CONSOLE=y
# CONFIG_SERIAL_CPM_SCC1 is not set
# CONFIG_SERIAL_CPM_SCC2 is not set
# CONFIG_SERIAL_CPM_SCC3 is not set
# CONFIG_SERIAL_CPM_SCC4 is not set
CONFIG_SERIAL_CPM_SMC1=y
CONFIG_SERIAL_CPM_SMC2=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
#
# I2C support
#
# CONFIG_I2C is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Misc devices
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
# CONFIG_NLS is not set
#
# MPC8xx CPM Options
#
CONFIG_SCC_ENET=y
# CONFIG_SCC1_ENET is not set
# CONFIG_SCC2_ENET is not set
CONFIG_SCC3_ENET=y
# CONFIG_FEC_ENET is not set
# CONFIG_ENET_BIG_BUFFERS is not set
#
# Generic MPC8xx Options
#
CONFIG_8xx_COPYBACK=y
CONFIG_8xx_CPU6=y
CONFIG_NO_UCODE_PATCH=y
# CONFIG_USB_SOF_UCODE_PATCH is not set
# CONFIG_I2C_SPI_UCODE_PATCH is not set
# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
#
# Library routines
#
CONFIG_CRC_CCITT=y
# CONFIG_CRC32 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
arch/ppc/platforms/Makefile
View file @ 36a23fc8
...@@ -4,7 +4,6 @@ ...@@ -4,7 +4,6 @@
obj-$(CONFIG_PPC_PREP) += prep_pci.o prep_setup.o obj-$(CONFIG_PPC_PREP) += prep_pci.o prep_setup.o
obj-$(CONFIG_PREP_RESIDUAL) += residual.o obj-$(CONFIG_PREP_RESIDUAL) += residual.o
obj-$(CONFIG_PQ2ADS) += pq2ads.o
obj-$(CONFIG_TQM8260) += tqm8260_setup.o obj-$(CONFIG_TQM8260) += tqm8260_setup.o
obj-$(CONFIG_CPCI690) += cpci690.o obj-$(CONFIG_CPCI690) += cpci690.o
obj-$(CONFIG_EV64260) += ev64260.o obj-$(CONFIG_EV64260) += ev64260.o
...@@ -24,6 +23,3 @@ obj-$(CONFIG_SBC82xx) += sbc82xx.o ...@@ -24,6 +23,3 @@ obj-$(CONFIG_SBC82xx) += sbc82xx.o
obj-$(CONFIG_SPRUCE) += spruce.o obj-$(CONFIG_SPRUCE) += spruce.o
obj-$(CONFIG_LITE5200) += lite5200.o obj-$(CONFIG_LITE5200) += lite5200.o
obj-$(CONFIG_EV64360) += ev64360.o obj-$(CONFIG_EV64360) += ev64360.o
obj-$(CONFIG_MPC86XADS) += mpc866ads_setup.o
obj-$(CONFIG_MPC885ADS) += mpc885ads_setup.o
obj-$(CONFIG_ADS8272) += mpc8272ads_setup.o
arch/ppc/platforms/fads.h
View file @ 36a23fc8
...@@ -22,29 +22,6 @@ ...@@ -22,29 +22,6 @@
#include <asm/ppcboot.h> #include <asm/ppcboot.h>
#if defined(CONFIG_MPC86XADS)
#define BOARD_CHIP_NAME "MPC86X"
/* U-Boot maps BCSR to 0xff080000 */
#define BCSR_ADDR ((uint)0xff080000)
/* MPC86XADS has one more CPLD and an additional BCSR.
*/
#define CFG_PHYDEV_ADDR ((uint)0xff0a0000)
#define BCSR5 ((uint)(CFG_PHYDEV_ADDR + 0x300))
#define BCSR5_T1_RST 0x10
#define BCSR5_ATM155_RST 0x08
#define BCSR5_ATM25_RST 0x04
#define BCSR5_MII1_EN 0x02
#define BCSR5_MII1_RST 0x01
/* There is no PHY link change interrupt */
#define PHY_INTERRUPT (-1)
#else /* FADS */
/* Memory map is configured by the PROM startup. /* Memory map is configured by the PROM startup.
* I tried to follow the FADS manual, although the startup PROM * I tried to follow the FADS manual, although the startup PROM
* dictates this and we simply have to move some of the physical * dictates this and we simply have to move some of the physical
...@@ -55,8 +32,6 @@ ...@@ -55,8 +32,6 @@
/* PHY link change interrupt */ /* PHY link change interrupt */
#define PHY_INTERRUPT SIU_IRQ2 #define PHY_INTERRUPT SIU_IRQ2
#endif /* CONFIG_MPC86XADS */
#define BCSR_SIZE ((uint)(64 * 1024)) #define BCSR_SIZE ((uint)(64 * 1024))
#define BCSR0 ((uint)(BCSR_ADDR + 0x00)) #define BCSR0 ((uint)(BCSR_ADDR + 0x00))
#define BCSR1 ((uint)(BCSR_ADDR + 0x04)) #define BCSR1 ((uint)(BCSR_ADDR + 0x04))
......
arch/ppc/platforms/mpc8272ads_setup.c deleted 100644 → 0
View file @ 23386fe5
/*
* arch/ppc/platforms/mpc8272ads_setup.c
*
* MPC82xx Board-specific PlatformDevice descriptions
*
* 2005 (c) MontaVista Software, Inc.
* Vitaly Bordug <vbordug@ru.mvista.com>
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/ioport.h>
#include <linux/fs_enet_pd.h>
#include <linux/platform_device.h>
#include <linux/phy.h>
#include <asm/io.h>
#include <asm/mpc8260.h>
#include <asm/cpm2.h>
#include <asm/immap_cpm2.h>
#include <asm/irq.h>
#include <asm/ppc_sys.h>
#include <asm/ppcboot.h>
#include <linux/fs_uart_pd.h>
#include "pq2ads_pd.h"
static void init_fcc1_ioports(struct fs_platform_info*);
static void init_fcc2_ioports(struct fs_platform_info*);
static void init_scc1_uart_ioports(struct fs_uart_platform_info*);
static void init_scc4_uart_ioports(struct fs_uart_platform_info*);
static struct fs_uart_platform_info mpc8272_uart_pdata[] = {
[fsid_scc1_uart] = {
.init_ioports = init_scc1_uart_ioports,
.fs_no = fsid_scc1_uart,
.brg = 1,
.tx_num_fifo = 4,
.tx_buf_size = 32,
.rx_num_fifo = 4,
.rx_buf_size = 32,
},
[fsid_scc4_uart] = {
.init_ioports = init_scc4_uart_ioports,
.fs_no = fsid_scc4_uart,
.brg = 4,
.tx_num_fifo = 4,
.tx_buf_size = 32,
.rx_num_fifo = 4,
.rx_buf_size = 32,
},
};
static struct fs_mii_bb_platform_info m82xx_mii_bb_pdata = {
.mdio_dat.bit = 18,
.mdio_dir.bit = 18,
.mdc_dat.bit = 19,
.delay = 1,
};
static struct fs_platform_info mpc82xx_enet_pdata[] = {
[fsid_fcc1] = {
.fs_no = fsid_fcc1,
.cp_page = CPM_CR_FCC1_PAGE,
.cp_block = CPM_CR_FCC1_SBLOCK,
.clk_trx = (PC_F1RXCLK | PC_F1TXCLK),
.clk_route = CMX1_CLK_ROUTE,
.clk_mask = CMX1_CLK_MASK,
.init_ioports = init_fcc1_ioports,
.mem_offset = FCC1_MEM_OFFSET,
.rx_ring = 32,
.tx_ring = 32,
.rx_copybreak = 240,
.use_napi = 0,
.napi_weight = 17,
.bus_id = "0:00",
},
[fsid_fcc2] = {
.fs_no = fsid_fcc2,
.cp_page = CPM_CR_FCC2_PAGE,
.cp_block = CPM_CR_FCC2_SBLOCK,
.clk_trx = (PC_F2RXCLK | PC_F2TXCLK),
.clk_route = CMX2_CLK_ROUTE,
.clk_mask = CMX2_CLK_MASK,
.init_ioports = init_fcc2_ioports,
.mem_offset = FCC2_MEM_OFFSET,
.rx_ring = 32,
.tx_ring = 32,
.rx_copybreak = 240,
.use_napi = 0,
.napi_weight = 17,
.bus_id = "0:03",
},
};
static void init_fcc1_ioports(struct fs_platform_info* pdata)
{
struct io_port *io;
u32 tempval;
cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
u32 *bcsr = ioremap(BCSR_ADDR+4, sizeof(u32));
io = &immap->im_ioport;
/* Enable the PHY */
clrbits32(bcsr, BCSR1_FETHIEN);
setbits32(bcsr, BCSR1_FETH_RST);
/* FCC1 pins are on port A/C. */
/* Configure port A and C pins for FCC1 Ethernet. */
tempval = in_be32(&io->iop_pdira);
tempval &= ~PA1_DIRA0;
tempval |= PA1_DIRA1;
out_be32(&io->iop_pdira, tempval);
tempval = in_be32(&io->iop_psora);
tempval &= ~PA1_PSORA0;
tempval |= PA1_PSORA1;
out_be32(&io->iop_psora, tempval);
setbits32(&io->iop_ppara,PA1_DIRA0 | PA1_DIRA1);
/* Alter clocks */
tempval = PC_F1TXCLK|PC_F1RXCLK;
clrbits32(&io->iop_psorc, tempval);
clrbits32(&io->iop_pdirc, tempval);
setbits32(&io->iop_pparc, tempval);
clrbits32(&immap->im_cpmux.cmx_fcr, CMX1_CLK_MASK);
setbits32(&immap->im_cpmux.cmx_fcr, CMX1_CLK_ROUTE);
iounmap(bcsr);
iounmap(immap);
}
static void init_fcc2_ioports(struct fs_platform_info* pdata)
{
cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
u32 *bcsr = ioremap(BCSR_ADDR+12, sizeof(u32));
struct io_port *io;
u32 tempval;
immap = cpm2_immr;
io = &immap->im_ioport;
/* Enable the PHY */
clrbits32(bcsr, BCSR3_FETHIEN2);
setbits32(bcsr, BCSR3_FETH2_RST);
/* FCC2 are port B/C. */
/* Configure port A and C pins for FCC2 Ethernet. */
tempval = in_be32(&io->iop_pdirb);
tempval &= ~PB2_DIRB0;
tempval |= PB2_DIRB1;
out_be32(&io->iop_pdirb, tempval);
tempval = in_be32(&io->iop_psorb);
tempval &= ~PB2_PSORB0;
tempval |= PB2_PSORB1;
out_be32(&io->iop_psorb, tempval);
setbits32(&io->iop_pparb,PB2_DIRB0 | PB2_DIRB1);
tempval = PC_F2RXCLK|PC_F2TXCLK;
/* Alter clocks */
clrbits32(&io->iop_psorc,tempval);
clrbits32(&io->iop_pdirc,tempval);
setbits32(&io->iop_pparc,tempval);
clrbits32(&immap->im_cpmux.cmx_fcr, CMX2_CLK_MASK);
setbits32(&immap->im_cpmux.cmx_fcr, CMX2_CLK_ROUTE);
iounmap(bcsr);
iounmap(immap);
}
static void __init mpc8272ads_fixup_enet_pdata(struct platform_device *pdev,
int idx)
{
bd_t* bi = (void*)__res;
int fs_no = fsid_fcc1+pdev->id-1;
if(fs_no >= ARRAY_SIZE(mpc82xx_enet_pdata)) {
return;
}
mpc82xx_enet_pdata[fs_no].dpram_offset=
(u32)cpm2_immr->im_dprambase;
mpc82xx_enet_pdata[fs_no].fcc_regs_c =
(u32)cpm2_immr->im_fcc_c;
memcpy(&mpc82xx_enet_pdata[fs_no].macaddr,bi->bi_enetaddr,6);
/* prevent dup mac */
if(fs_no == fsid_fcc2)
mpc82xx_enet_pdata[fs_no].macaddr[5] ^= 1;
pdev->dev.platform_data = &mpc82xx_enet_pdata[fs_no];
}
static void mpc8272ads_fixup_uart_pdata(struct platform_device *pdev,
int idx)
{
bd_t *bd = (bd_t *) __res;
struct fs_uart_platform_info *pinfo;
int num = ARRAY_SIZE(mpc8272_uart_pdata);
int id = fs_uart_id_scc2fsid(idx);
/* no need to alter anything if console */
if ((id < num) && (!pdev->dev.platform_data)) {
pinfo = &mpc8272_uart_pdata[id];
pinfo->uart_clk = bd->bi_intfreq;
pdev->dev.platform_data = pinfo;
}
}
static void init_scc1_uart_ioports(struct fs_uart_platform_info* pdata)
{
cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
/* SCC1 is only on port D */
setbits32(&immap->im_ioport.iop_ppard,0x00000003);
clrbits32(&immap->im_ioport.iop_psord,0x00000001);
setbits32(&immap->im_ioport.iop_psord,0x00000002);
clrbits32(&immap->im_ioport.iop_pdird,0x00000001);
setbits32(&immap->im_ioport.iop_pdird,0x00000002);
/* Wire BRG1 to SCC1 */
clrbits32(&immap->im_cpmux.cmx_scr,0x00ffffff);
iounmap(immap);
}
static void init_scc4_uart_ioports(struct fs_uart_platform_info* pdata)
{
cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
setbits32(&immap->im_ioport.iop_ppard,0x00000600);
clrbits32(&immap->im_ioport.iop_psord,0x00000600);
clrbits32(&immap->im_ioport.iop_pdird,0x00000200);
setbits32(&immap->im_ioport.iop_pdird,0x00000400);
/* Wire BRG4 to SCC4 */
clrbits32(&immap->im_cpmux.cmx_scr,0x000000ff);
setbits32(&immap->im_cpmux.cmx_scr,0x0000001b);
iounmap(immap);
}
static void __init mpc8272ads_fixup_mdio_pdata(struct platform_device *pdev,
int idx)
{
m82xx_mii_bb_pdata.irq[0] = PHY_INTERRUPT;
m82xx_mii_bb_pdata.irq[1] = PHY_POLL;
m82xx_mii_bb_pdata.irq[2] = PHY_POLL;
m82xx_mii_bb_pdata.irq[3] = PHY_INTERRUPT;
m82xx_mii_bb_pdata.irq[31] = PHY_POLL;
m82xx_mii_bb_pdata.mdio_dat.offset =
(u32)&cpm2_immr->im_ioport.iop_pdatc;
m82xx_mii_bb_pdata.mdio_dir.offset =
(u32)&cpm2_immr->im_ioport.iop_pdirc;
m82xx_mii_bb_pdata.mdc_dat.offset =
(u32)&cpm2_immr->im_ioport.iop_pdatc;
pdev->dev.platform_data = &m82xx_mii_bb_pdata;
}
static int mpc8272ads_platform_notify(struct device *dev)
{
static const struct platform_notify_dev_map dev_map[] = {
{
.bus_id = "fsl-cpm-fcc",
.rtn = mpc8272ads_fixup_enet_pdata,
},
{
.bus_id = "fsl-cpm-scc:uart",
.rtn = mpc8272ads_fixup_uart_pdata,
},
{
.bus_id = "fsl-bb-mdio",
.rtn = mpc8272ads_fixup_mdio_pdata,
},
{
.bus_id = NULL
}
};
platform_notify_map(dev_map,dev);
return 0;
}
int __init mpc8272ads_init(void)
{
printk(KERN_NOTICE "mpc8272ads: Init\n");
platform_notify = mpc8272ads_platform_notify;
ppc_sys_device_initfunc();
ppc_sys_device_disable_all();
ppc_sys_device_enable(MPC82xx_CPM_FCC1);
ppc_sys_device_enable(MPC82xx_CPM_FCC2);
/* to be ready for console, let's attach pdata here */
#ifdef CONFIG_SERIAL_CPM_SCC1
ppc_sys_device_setfunc(MPC82xx_CPM_SCC1, PPC_SYS_FUNC_UART);
ppc_sys_device_enable(MPC82xx_CPM_SCC1);
#endif
#ifdef CONFIG_SERIAL_CPM_SCC4
ppc_sys_device_setfunc(MPC82xx_CPM_SCC4, PPC_SYS_FUNC_UART);
ppc_sys_device_enable(MPC82xx_CPM_SCC4);
#endif
ppc_sys_device_enable(MPC82xx_MDIO_BB);
return 0;
}
/*
To prevent confusion, console selection is gross:
by 0 assumed SCC1 and by 1 assumed SCC4
*/
struct platform_device* early_uart_get_pdev(int index)
{
bd_t *bd = (bd_t *) __res;
struct fs_uart_platform_info *pinfo;
struct platform_device* pdev = NULL;
if(index) { /*assume SCC4 here*/
pdev = &ppc_sys_platform_devices[MPC82xx_CPM_SCC4];
pinfo = &mpc8272_uart_pdata[fsid_scc4_uart];
} else { /*over SCC1*/
pdev = &ppc_sys_platform_devices[MPC82xx_CPM_SCC1];
pinfo = &mpc8272_uart_pdata[fsid_scc1_uart];
}
pinfo->uart_clk = bd->bi_intfreq;
pdev->dev.platform_data = pinfo;
ppc_sys_fixup_mem_resource(pdev, CPM_MAP_ADDR);
return NULL;
}
arch_initcall(mpc8272ads_init);
arch/ppc/platforms/mpc885ads.h deleted 100644 → 0
View file @ 23386fe5
/*
* A collection of structures, addresses, and values associated with
* the Freescale MPC885ADS board.
* Copied from the FADS stuff.
*
* Author: MontaVista Software, Inc.
* source@mvista.com
*
* 2005 (c) MontaVista Software, Inc. This file is licensed under the
* terms of the GNU General Public License version 2. This program is licensed
* "as is" without any warranty of any kind, whether express or implied.
*/
#ifdef __KERNEL__
#ifndef __ASM_MPC885ADS_H__
#define __ASM_MPC885ADS_H__
#include <asm/ppcboot.h>
/* U-Boot maps BCSR to 0xff080000 */
#define BCSR_ADDR ((uint)0xff080000)
#define BCSR_SIZE ((uint)32)
#define BCSR0 ((uint)(BCSR_ADDR + 0x00))
#define BCSR1 ((uint)(BCSR_ADDR + 0x04))
#define BCSR2 ((uint)(BCSR_ADDR + 0x08))
#define BCSR3 ((uint)(BCSR_ADDR + 0x0c))
#define BCSR4 ((uint)(BCSR_ADDR + 0x10))
#define CFG_PHYDEV_ADDR ((uint)0xff0a0000)
#define BCSR5 ((uint)(CFG_PHYDEV_ADDR + 0x300))
#define IMAP_ADDR ((uint)0xff000000)
#define IMAP_SIZE ((uint)(64 * 1024))
#define PCMCIA_MEM_ADDR ((uint)0xff020000)
#define PCMCIA_MEM_SIZE ((uint)(64 * 1024))
/* Bits of interest in the BCSRs.
*/
#define BCSR1_ETHEN ((uint)0x20000000)
#define BCSR1_IRDAEN ((uint)0x10000000)
#define BCSR1_RS232EN_1 ((uint)0x01000000)
#define BCSR1_PCCEN ((uint)0x00800000)
#define BCSR1_PCCVCC0 ((uint)0x00400000)
#define BCSR1_PCCVPP0 ((uint)0x00200000)
#define BCSR1_PCCVPP1 ((uint)0x00100000)
#define BCSR1_PCCVPP_MASK (BCSR1_PCCVPP0 | BCSR1_PCCVPP1)
#define BCSR1_RS232EN_2 ((uint)0x00040000)
#define BCSR1_PCCVCC1 ((uint)0x00010000)
#define BCSR1_PCCVCC_MASK (BCSR1_PCCVCC0 | BCSR1_PCCVCC1)
#define BCSR4_ETH10_RST ((uint)0x80000000) /* 10Base-T PHY reset*/
#define BCSR4_USB_LO_SPD ((uint)0x04000000)
#define BCSR4_USB_VCC ((uint)0x02000000)
#define BCSR4_USB_FULL_SPD ((uint)0x00040000)
#define BCSR4_USB_EN ((uint)0x00020000)
#define BCSR5_MII2_EN 0x40
#define BCSR5_MII2_RST 0x20
#define BCSR5_T1_RST 0x10
#define BCSR5_ATM155_RST 0x08
#define BCSR5_ATM25_RST 0x04
#define BCSR5_MII1_EN 0x02
#define BCSR5_MII1_RST 0x01
/* Interrupt level assignments */
#define PHY_INTERRUPT SIU_IRQ7 /* PHY link change interrupt */
#define SIU_INT_FEC1 SIU_LEVEL1 /* FEC1 interrupt */
#define SIU_INT_FEC2 SIU_LEVEL3 /* FEC2 interrupt */
#define FEC_INTERRUPT SIU_INT_FEC1 /* FEC interrupt */
/* We don't use the 8259 */
#define NR_8259_INTS 0
/* CPM Ethernet through SCC3 */
#define PA_ENET_RXD ((ushort)0x0040)
#define PA_ENET_TXD ((ushort)0x0080)
#define PE_ENET_TCLK ((uint)0x00004000)
#define PE_ENET_RCLK ((uint)0x00008000)
#define PE_ENET_TENA ((uint)0x00000010)
#define PC_ENET_CLSN ((ushort)0x0400)
#define PC_ENET_RENA ((ushort)0x0800)
/* Control bits in the SICR to route TCLK (CLK5) and RCLK (CLK6) to
* SCC3. Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero */
#define SICR_ENET_MASK ((uint)0x00ff0000)
#define SICR_ENET_CLKRT ((uint)0x002c0000)
#define BOARD_CHIP_NAME "MPC885"
#endif /* __ASM_MPC885ADS_H__ */
#endif /* __KERNEL__ */
arch/ppc/platforms/mpc885ads_setup.c deleted 100644 → 0
View file @ 23386fe5
/*arch/ppc/platforms/mpc885ads_setup.c
*
* Platform setup for the Freescale mpc885ads board
*
* Vitaly Bordug <vbordug@ru.mvista.com>
*
* Copyright 2005 MontaVista Software Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/ioport.h>
#include <linux/device.h>
#include <linux/fs_enet_pd.h>
#include <linux/fs_uart_pd.h>
#include <linux/mii.h>
#include <asm/delay.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/page.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/time.h>
#include <asm/ppcboot.h>
#include <asm/8xx_immap.h>
#include <asm/cpm1.h>
#include <asm/ppc_sys.h>
extern unsigned char __res[];
static void setup_smc1_ioports(struct fs_uart_platform_info*);
static void setup_smc2_ioports(struct fs_uart_platform_info*);
static struct fs_mii_fec_platform_info mpc8xx_mdio_fec_pdata;
static void setup_fec1_ioports(struct fs_platform_info*);
static void setup_fec2_ioports(struct fs_platform_info*);
static void setup_scc3_ioports(struct fs_platform_info*);
static struct fs_uart_platform_info mpc885_uart_pdata[] = {
[fsid_smc1_uart] = {
.brg = 1,
.fs_no = fsid_smc1_uart,
.init_ioports = setup_smc1_ioports,
.tx_num_fifo = 4,
.tx_buf_size = 32,
.rx_num_fifo = 4,
.rx_buf_size = 32,
},
[fsid_smc2_uart] = {
.brg = 2,
.fs_no = fsid_smc2_uart,
.init_ioports = setup_smc2_ioports,
.tx_num_fifo = 4,
.tx_buf_size = 32,
.rx_num_fifo = 4,
.rx_buf_size = 32,
},
};
static struct fs_platform_info mpc8xx_enet_pdata[] = {
[fsid_fec1] = {
.rx_ring = 128,
.tx_ring = 16,
.rx_copybreak = 240,
.use_napi = 1,
.napi_weight = 17,
.init_ioports = setup_fec1_ioports,
.bus_id = "0:00",
.has_phy = 1,
},
[fsid_fec2] = {
.rx_ring = 128,
.tx_ring = 16,
.rx_copybreak = 240,
.use_napi = 1,
.napi_weight = 17,
.init_ioports = setup_fec2_ioports,
.bus_id = "0:01",
.has_phy = 1,
},
[fsid_scc3] = {
.rx_ring = 64,
.tx_ring = 8,
.rx_copybreak = 240,
.use_napi = 1,
.napi_weight = 17,
.init_ioports = setup_scc3_ioports,
#ifdef CONFIG_FIXED_MII_10_FDX
.bus_id = "fixed@100:1",
#else
.bus_id = "0:02",
#endif
},
};
void __init board_init(void)
{
cpm8xx_t *cp = cpmp;
unsigned int *bcsr_io;
#ifdef CONFIG_FS_ENET
immap_t *immap = (immap_t *) IMAP_ADDR;
#endif
bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
if (bcsr_io == NULL) {
printk(KERN_CRIT "Could not remap BCSR\n");
return;
}
#ifdef CONFIG_SERIAL_CPM_SMC1
cp->cp_simode &= ~(0xe0000000 >> 17); /* brg1 */
clrbits32(bcsr_io, BCSR1_RS232EN_1);
cp->cp_smc[0].smc_smcm |= (SMCM_RX | SMCM_TX);
cp->cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
#else
setbits32(bcsr_io,BCSR1_RS232EN_1);
cp->cp_smc[0].smc_smcmr = 0;
cp->cp_smc[0].smc_smce = 0;
#endif
#ifdef CONFIG_SERIAL_CPM_SMC2
cp->cp_simode &= ~(0xe0000000 >> 1);
cp->cp_simode |= (0x20000000 >> 1); /* brg2 */
clrbits32(bcsr_io,BCSR1_RS232EN_2);
cp->cp_smc[1].smc_smcm |= (SMCM_RX | SMCM_TX);
cp->cp_smc[1].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
#else
setbits32(bcsr_io,BCSR1_RS232EN_2);
cp->cp_smc[1].smc_smcmr = 0;
cp->cp_smc[1].smc_smce = 0;
#endif
iounmap(bcsr_io);
#ifdef CONFIG_FS_ENET
/* use MDC for MII (common) */
setbits16(&immap->im_ioport.iop_pdpar, 0x0080);
clrbits16(&immap->im_ioport.iop_pddir, 0x0080);
bcsr_io = ioremap(BCSR5, sizeof(unsigned long));
clrbits32(bcsr_io,BCSR5_MII1_EN);
clrbits32(bcsr_io,BCSR5_MII1_RST);
#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
clrbits32(bcsr_io,BCSR5_MII2_EN);
clrbits32(bcsr_io,BCSR5_MII2_RST);
#endif
iounmap(bcsr_io);
#endif
}
static void setup_fec1_ioports(struct fs_platform_info* pdata)
{
immap_t *immap = (immap_t *) IMAP_ADDR;
/* configure FEC1 pins */
setbits16(&immap->im_ioport.iop_papar, 0xf830);
setbits16(&immap->im_ioport.iop_padir, 0x0830);
clrbits16(&immap->im_ioport.iop_padir, 0xf000);
setbits32(&immap->im_cpm.cp_pbpar, 0x00001001);
clrbits32(&immap->im_cpm.cp_pbdir, 0x00001001);
setbits16(&immap->im_ioport.iop_pcpar, 0x000c);
clrbits16(&immap->im_ioport.iop_pcdir, 0x000c);
setbits32(&immap->im_cpm.cp_pepar, 0x00000003);
setbits32(&immap->im_cpm.cp_pedir, 0x00000003);
clrbits32(&immap->im_cpm.cp_peso, 0x00000003);
clrbits32(&immap->im_cpm.cp_cptr, 0x00000100);
}
static void setup_fec2_ioports(struct fs_platform_info* pdata)
{
immap_t *immap = (immap_t *) IMAP_ADDR;
/* configure FEC2 pins */
setbits32(&immap->im_cpm.cp_pepar, 0x0003fffc);
setbits32(&immap->im_cpm.cp_pedir, 0x0003fffc);
clrbits32(&immap->im_cpm.cp_peso, 0x000087fc);
setbits32(&immap->im_cpm.cp_peso, 0x00037800);
clrbits32(&immap->im_cpm.cp_cptr, 0x00000080);
}
static void setup_scc3_ioports(struct fs_platform_info* pdata)
{
immap_t *immap = (immap_t *) IMAP_ADDR;
unsigned *bcsr_io;
bcsr_io = ioremap(BCSR_ADDR, BCSR_SIZE);
if (bcsr_io == NULL) {
printk(KERN_CRIT "Could not remap BCSR\n");
return;
}
/* Enable the PHY.
*/
clrbits32(bcsr_io+4, BCSR4_ETH10_RST);
udelay(1000);
setbits32(bcsr_io+4, BCSR4_ETH10_RST);
/* Configure port A pins for Txd and Rxd.
*/
setbits16(&immap->im_ioport.iop_papar, PA_ENET_RXD | PA_ENET_TXD);
clrbits16(&immap->im_ioport.iop_padir, PA_ENET_RXD | PA_ENET_TXD);
/* Configure port C pins to enable CLSN and RENA.
*/
clrbits16(&immap->im_ioport.iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA);
clrbits16(&immap->im_ioport.iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA);
setbits16(&immap->im_ioport.iop_pcso, PC_ENET_CLSN | PC_ENET_RENA);
/* Configure port E for TCLK and RCLK.
*/
setbits32(&immap->im_cpm.cp_pepar, PE_ENET_TCLK | PE_ENET_RCLK);
clrbits32(&immap->im_cpm.cp_pepar, PE_ENET_TENA);
clrbits32(&immap->im_cpm.cp_pedir,
PE_ENET_TCLK | PE_ENET_RCLK | PE_ENET_TENA);
clrbits32(&immap->im_cpm.cp_peso, PE_ENET_TCLK | PE_ENET_RCLK);
setbits32(&immap->im_cpm.cp_peso, PE_ENET_TENA);
/* Configure Serial Interface clock routing.
* First, clear all SCC bits to zero, then set the ones we want.
*/
clrbits32(&immap->im_cpm.cp_sicr, SICR_ENET_MASK);
setbits32(&immap->im_cpm.cp_sicr, SICR_ENET_CLKRT);
/* Disable Rx and Tx. SMC1 sshould be stopped if SCC3 eternet are used.
*/
immap->im_cpm.cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
/* On the MPC885ADS SCC ethernet PHY is initialized in the full duplex mode
* by H/W setting after reset. SCC ethernet controller support only half duplex.
* This discrepancy of modes causes a lot of carrier lost errors.
*/
/* In the original SCC enet driver the following code is placed at
the end of the initialization */
setbits32(&immap->im_cpm.cp_pepar, PE_ENET_TENA);
clrbits32(&immap->im_cpm.cp_pedir, PE_ENET_TENA);
setbits32(&immap->im_cpm.cp_peso, PE_ENET_TENA);
setbits32(bcsr_io+4, BCSR1_ETHEN);
iounmap(bcsr_io);
}
static int mac_count = 0;
static void mpc885ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no)
{
struct fs_platform_info *fpi;
bd_t *bd = (bd_t *) __res;
char *e;
int i;
if(fs_no >= ARRAY_SIZE(mpc8xx_enet_pdata)) {
printk(KERN_ERR"No network-suitable #%d device on bus", fs_no);
return;
}
fpi = &mpc8xx_enet_pdata[fs_no];
switch (fs_no) {
case fsid_fec1:
fpi->init_ioports = &setup_fec1_ioports;
break;
case fsid_fec2:
fpi->init_ioports = &setup_fec2_ioports;
break;
case fsid_scc3:
fpi->init_ioports = &setup_scc3_ioports;
break;
default:
printk(KERN_WARNING "Device %s is not supported!\n", pdev->name);
return;
}
pdev->dev.platform_data = fpi;
fpi->fs_no = fs_no;
e = (unsigned char *)&bd->bi_enetaddr;
for (i = 0; i < 6; i++)
fpi->macaddr[i] = *e++;
fpi->macaddr[5] += mac_count++;
}
static void mpc885ads_fixup_fec_enet_pdata(struct platform_device *pdev,
int idx)
{
/* This is for FEC devices only */
if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-fec")))
return;
mpc885ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1);
}
static void __init mpc885ads_fixup_scc_enet_pdata(struct platform_device *pdev,
int idx)
{
/* This is for SCC devices only */
if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-scc")))
return;
mpc885ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1);
}
static void setup_smc1_ioports(struct fs_uart_platform_info* pdata)
{
immap_t *immap = (immap_t *) IMAP_ADDR;
unsigned *bcsr_io;
unsigned int iobits = 0x000000c0;
bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
if (bcsr_io == NULL) {
printk(KERN_CRIT "Could not remap BCSR1\n");
return;
}
clrbits32(bcsr_io,BCSR1_RS232EN_1);
iounmap(bcsr_io);
setbits32(&immap->im_cpm.cp_pbpar, iobits);
clrbits32(&immap->im_cpm.cp_pbdir, iobits);
clrbits16(&immap->im_cpm.cp_pbodr, iobits);
}
static void setup_smc2_ioports(struct fs_uart_platform_info* pdata)
{
immap_t *immap = (immap_t *) IMAP_ADDR;
unsigned *bcsr_io;
unsigned int iobits = 0x00000c00;
bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
if (bcsr_io == NULL) {
printk(KERN_CRIT "Could not remap BCSR1\n");
return;
}
clrbits32(bcsr_io,BCSR1_RS232EN_2);
iounmap(bcsr_io);
#ifndef CONFIG_SERIAL_CPM_ALT_SMC2
setbits32(&immap->im_cpm.cp_pbpar, iobits);
clrbits32(&immap->im_cpm.cp_pbdir, iobits);
clrbits16(&immap->im_cpm.cp_pbodr, iobits);
#else
setbits16(&immap->im_ioport.iop_papar, iobits);
clrbits16(&immap->im_ioport.iop_padir, iobits);
clrbits16(&immap->im_ioport.iop_paodr, iobits);
#endif
}
static void __init mpc885ads_fixup_uart_pdata(struct platform_device *pdev,
int idx)
{
bd_t *bd = (bd_t *) __res;
struct fs_uart_platform_info *pinfo;
int num = ARRAY_SIZE(mpc885_uart_pdata);
int id = fs_uart_id_smc2fsid(idx);
/* no need to alter anything if console */
if ((id < num) && (!pdev->dev.platform_data)) {
pinfo = &mpc885_uart_pdata[id];
pinfo->uart_clk = bd->bi_intfreq;
pdev->dev.platform_data = pinfo;
}
}
static int mpc885ads_platform_notify(struct device *dev)
{
static const struct platform_notify_dev_map dev_map[] = {
{
.bus_id = "fsl-cpm-fec",
.rtn = mpc885ads_fixup_fec_enet_pdata,
},
{
.bus_id = "fsl-cpm-scc",
.rtn = mpc885ads_fixup_scc_enet_pdata,
},
{
.bus_id = "fsl-cpm-smc:uart",
.rtn = mpc885ads_fixup_uart_pdata
},
{
.bus_id = NULL
}
};
platform_notify_map(dev_map,dev);
return 0;
}
int __init mpc885ads_init(void)
{
struct fs_mii_fec_platform_info* fmpi;
bd_t *bd = (bd_t *) __res;
printk(KERN_NOTICE "mpc885ads: Init\n");
platform_notify = mpc885ads_platform_notify;
ppc_sys_device_initfunc();
ppc_sys_device_disable_all();
ppc_sys_device_enable(MPC8xx_CPM_FEC1);
ppc_sys_device_enable(MPC8xx_MDIO_FEC);
fmpi = ppc_sys_platform_devices[MPC8xx_MDIO_FEC].dev.platform_data =
&mpc8xx_mdio_fec_pdata;
fmpi->mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1;
/* No PHY interrupt line here */
fmpi->irq[0xf] = SIU_IRQ7;
#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
ppc_sys_device_enable(MPC8xx_CPM_SCC3);
#endif
#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
ppc_sys_device_enable(MPC8xx_CPM_FEC2);
#endif
#ifdef CONFIG_SERIAL_CPM_SMC1
ppc_sys_device_enable(MPC8xx_CPM_SMC1);
ppc_sys_device_setfunc(MPC8xx_CPM_SMC1, PPC_SYS_FUNC_UART);
#endif
#ifdef CONFIG_SERIAL_CPM_SMC2
ppc_sys_device_enable(MPC8xx_CPM_SMC2);
ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART);
#endif
return 0;
}
arch_initcall(mpc885ads_init);
/*
To prevent confusion, console selection is gross:
by 0 assumed SMC1 and by 1 assumed SMC2
*/
struct platform_device* early_uart_get_pdev(int index)
{
bd_t *bd = (bd_t *) __res;
struct fs_uart_platform_info *pinfo;
struct platform_device* pdev = NULL;
if(index) { /*assume SMC2 here*/
pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC2];
pinfo = &mpc885_uart_pdata[1];
} else { /*over SMC1*/
pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC1];
pinfo = &mpc885_uart_pdata[0];
}
pinfo->uart_clk = bd->bi_intfreq;
pdev->dev.platform_data = pinfo;
ppc_sys_fixup_mem_resource(pdev, IMAP_ADDR);
return NULL;
}
arch/ppc/platforms/pq2ads.c deleted 100644 → 0
View file @ 23386fe5
/*
* PQ2ADS platform support
*
* Author: Kumar Gala <galak@kernel.crashing.org>
* Derived from: est8260_setup.c by Allen Curtis
*
* Copyright 2004 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/init.h>
#include <asm/io.h>
#include <asm/mpc8260.h>
#include <asm/cpm2.h>
#include <asm/immap_cpm2.h>
void __init
m82xx_board_setup(void)
{
cpm2_map_t* immap = ioremap(CPM_MAP_ADDR, sizeof(cpm2_map_t));
u32 *bcsr = ioremap(BCSR_ADDR+4, sizeof(u32));
/* Enable the 2nd UART port */
clrbits32(bcsr, BCSR1_RS232_EN2);
#ifdef CONFIG_SERIAL_CPM_SCC1
clrbits32((u32*)&immap->im_scc[0].scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
clrbits32((u32*)&immap->im_scc[0].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
#endif
#ifdef CONFIG_SERIAL_CPM_SCC2
clrbits32((u32*)&immap->im_scc[1].scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
clrbits32((u32*)&immap->im_scc[1].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
#endif
#ifdef CONFIG_SERIAL_CPM_SCC3
clrbits32((u32*)&immap->im_scc[2].scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
clrbits32((u32*)&immap->im_scc[2].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
#endif
#ifdef CONFIG_SERIAL_CPM_SCC4
clrbits32((u32*)&immap->im_scc[3].scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
clrbits32((u32*)&immap->im_scc[3].scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
#endif
iounmap(bcsr);
iounmap(immap);
}
arch/ppc/platforms/pq2ads.h deleted 100644 → 0
View file @ 23386fe5
/*
* A collection of structures, addresses, and values associated with
* the Motorola MPC8260ADS/MPC8266ADS-PCI boards.
* Copied from the RPX-Classic and SBS8260 stuff.
*
* Copyright (c) 2001 Dan Malek (dan@mvista.com)
*/
#ifdef __KERNEL__
#ifndef __MACH_ADS8260_DEFS
#define __MACH_ADS8260_DEFS
#include <asm/ppcboot.h>
#if defined(CONFIG_ADS8272)
#define BOARD_CHIP_NAME "8272"
#endif
/* Memory map is configured by the PROM startup.
* We just map a few things we need. The CSR is actually 4 byte-wide
* registers that can be accessed as 8-, 16-, or 32-bit values.
*/
#define CPM_MAP_ADDR ((uint)0xf0000000)
#define BCSR_ADDR ((uint)0xf4500000)
#define BCSR_SIZE ((uint)(32 * 1024))
#define BOOTROM_RESTART_ADDR ((uint)0xff000104)
/* For our show_cpuinfo hooks. */
#define CPUINFO_VENDOR "Motorola"
#define CPUINFO_MACHINE "PQ2 ADS PowerPC"
/* The ADS8260 has 16, 32-bit wide control/status registers, accessed
* only on word boundaries.
* Not all are used (yet), or are interesting to us (yet).
*/
/* Things of interest in the CSR.
*/
#define BCSR0_LED0 ((uint)0x02000000) /* 0 == on */
#define BCSR0_LED1 ((uint)0x01000000) /* 0 == on */
#define BCSR1_FETHIEN ((uint)0x08000000) /* 0 == enable */
#define BCSR1_FETH_RST ((uint)0x04000000) /* 0 == reset */
#define BCSR1_RS232_EN1 ((uint)0x02000000) /* 0 == enable */
#define BCSR1_RS232_EN2 ((uint)0x01000000) /* 0 == enable */
#define BCSR3_FETHIEN2 ((uint)0x10000000) /* 0 == enable */
#define BCSR3_FETH2_RST ((uint)0x80000000) /* 0 == reset */
#define PHY_INTERRUPT SIU_INT_IRQ7
#ifdef CONFIG_PCI
/* PCI interrupt controller */
#define PCI_INT_STAT_REG 0xF8200000
#define PCI_INT_MASK_REG 0xF8200004
#define PIRQA (NR_CPM_INTS + 0)
#define PIRQB (NR_CPM_INTS + 1)
#define PIRQC (NR_CPM_INTS + 2)
#define PIRQD (NR_CPM_INTS + 3)
/*
* PCI memory map definitions for MPC8266ADS-PCI.
*
* processor view
* local address PCI address target
* 0x80000000-0x9FFFFFFF 0x80000000-0x9FFFFFFF PCI mem with prefetch
* 0xA0000000-0xBFFFFFFF 0xA0000000-0xBFFFFFFF PCI mem w/o prefetch
* 0xF4000000-0xF7FFFFFF 0x00000000-0x03FFFFFF PCI IO
*
* PCI master view
* local address PCI address target
* 0x00000000-0x1FFFFFFF 0x00000000-0x1FFFFFFF MPC8266 local memory
*/
/* All the other PCI memory map definitions reside at syslib/m82xx_pci.h
Here we should redefine what is unique for this board */
#define M82xx_PCI_SLAVE_MEM_LOCAL 0x00000000 /* Local base */
#define M82xx_PCI_SLAVE_MEM_BUS 0x00000000 /* PCI base */
#define M82xx_PCI_SLAVE_MEM_SIZE 0x10000000 /* 256 Mb */
#define M82xx_PCI_SLAVE_SEC_WND_SIZE ~(0x40000000 - 1U) /* 2 x 512Mb */
#define M82xx_PCI_SLAVE_SEC_WND_BASE 0x80000000 /* PCI Memory base */
#if defined(CONFIG_ADS8272)
#define PCI_INT_TO_SIU SIU_INT_IRQ2
#elif defined(CONFIG_PQ2FADS)
#define PCI_INT_TO_SIU SIU_INT_IRQ6
#else
#warning PCI Bridge will be without interrupts support
#endif
#endif /* CONFIG_PCI */
#endif /* __MACH_ADS8260_DEFS */
#endif /* __KERNEL__ */
arch/ppc/platforms/pq2ads_pd.h deleted 100644 → 0
View file @ 23386fe5
#ifndef __PQ2ADS_PD_H
#define __PQ2ADS_PD_H
/*
* arch/ppc/platforms/82xx/pq2ads_pd.h
*
* Some defines for MPC82xx board-specific PlatformDevice descriptions
*
* 2005 (c) MontaVista Software, Inc.
* Vitaly Bordug <vbordug@ru.mvista.com>
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/* FCC1 Clock Source Configuration. These can be redefined in the board specific file.
Can only choose from CLK9-12 */
#define F1_RXCLK 11
#define F1_TXCLK 10
/* FCC2 Clock Source Configuration. These can be redefined in the board specific file.
Can only choose from CLK13-16 */
#define F2_RXCLK 15
#define F2_TXCLK 16
/* FCC3 Clock Source Configuration. These can be redefined in the board specific file.
Can only choose from CLK13-16 */
#define F3_RXCLK 13
#define F3_TXCLK 14
#endif
arch/ppc/syslib/m8260_setup.c
View file @ 36a23fc8
...@@ -175,12 +175,6 @@ m8260_init_IRQ(void) ...@@ -175,12 +175,6 @@ m8260_init_IRQ(void)
* in case the boot rom changed something on us. * in case the boot rom changed something on us.
*/ */
cpm2_immr->im_intctl.ic_siprr = 0x05309770; cpm2_immr->im_intctl.ic_siprr = 0x05309770;
#if defined(CONFIG_PCI) && (defined(CONFIG_ADS8272) || defined(CONFIG_PQ2FADS))
/* Initialize stuff for the 82xx CPLD IC and install demux */
pq2pci_init_irq();
#endif
} }
/* /*
......
arch/ppc/syslib/m82xx_pci.c
View file @ 36a23fc8
...@@ -150,14 +150,6 @@ pq2pci_init_irq(void) ...@@ -150,14 +150,6 @@ pq2pci_init_irq(void)
{ {
int irq; int irq;
volatile cpm2_map_t *immap = cpm2_immr; volatile cpm2_map_t *immap = cpm2_immr;
#if defined CONFIG_ADS8272
/* configure chip select for PCI interrupt controller */
immap->im_memctl.memc_br3 = PCI_INT_STAT_REG | 0x00001801;
immap->im_memctl.memc_or3 = 0xffff8010;
#elif defined CONFIG_PQ2FADS
immap->im_memctl.memc_br8 = PCI_INT_STAT_REG | 0x00001801;
immap->im_memctl.memc_or8 = 0xffff8010;
#endif
for (irq = NR_CPM_INTS; irq < NR_CPM_INTS + 4; irq++) for (irq = NR_CPM_INTS; irq < NR_CPM_INTS + 4; irq++)
irq_desc[irq].chip = &pq2pci_ic; irq_desc[irq].chip = &pq2pci_ic;
...@@ -222,26 +214,6 @@ pq2ads_setup_pci(struct pci_controller *hose) ...@@ -222,26 +214,6 @@ pq2ads_setup_pci(struct pci_controller *hose)
immap->im_memctl.memc_pcibr1 = M82xx_PCI_SEC_WND_BASE | PCIBR_ENABLE; immap->im_memctl.memc_pcibr1 = M82xx_PCI_SEC_WND_BASE | PCIBR_ENABLE;
#endif #endif
#if defined CONFIG_ADS8272
immap->im_siu_conf.siu_82xx.sc_siumcr =
(immap->im_siu_conf.siu_82xx.sc_siumcr &
~(SIUMCR_BBD | SIUMCR_ESE | SIUMCR_PBSE |
SIUMCR_CDIS | SIUMCR_DPPC11 | SIUMCR_L2CPC11 |
SIUMCR_LBPC11 | SIUMCR_APPC11 |
SIUMCR_CS10PC11 | SIUMCR_BCTLC11 | SIUMCR_MMR11)) |
SIUMCR_DPPC11 | SIUMCR_L2CPC01 | SIUMCR_LBPC00 |
SIUMCR_APPC10 | SIUMCR_CS10PC00 |
SIUMCR_BCTLC00 | SIUMCR_MMR11 ;
#elif defined CONFIG_PQ2FADS
/*
* Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
* and local bus for PCI (SIUMCR [LBPC]).
*/
immap->im_siu_conf.siu_82xx.sc_siumcr = (immap->im_siu_conf.siu_82xx.sc_siumcr &
~(SIUMCR_L2CPC11 | SIUMCR_LBPC11 | SIUMCR_CS10PC11 | SIUMCR_APPC11) |
SIUMCR_BBD | SIUMCR_LBPC01 | SIUMCR_DPPC11 | SIUMCR_APPC10);
#endif
/* Enable PCI */ /* Enable PCI */
immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN); immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN);
...@@ -284,12 +256,6 @@ pq2ads_setup_pci(struct pci_controller *hose) ...@@ -284,12 +256,6 @@ pq2ads_setup_pci(struct pci_controller *hose)
immap->im_pci.pci_pibar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_BUS >> PITA_ADDR_SHIFT); immap->im_pci.pci_pibar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_BUS >> PITA_ADDR_SHIFT);
immap->im_pci.pci_pitar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_LOCAL>> PITA_ADDR_SHIFT); immap->im_pci.pci_pitar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_LOCAL>> PITA_ADDR_SHIFT);
#if defined CONFIG_ADS8272
/* PCI int highest prio */
immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x01236745;
#elif defined CONFIG_PQ2FADS
immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x03124567;
#endif
/* park bus on PCI */ /* park bus on PCI */
immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI; immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
...@@ -320,10 +286,6 @@ void __init pq2_find_bridges(void) ...@@ -320,10 +286,6 @@ void __init pq2_find_bridges(void)
hose->bus_offset = 0; hose->bus_offset = 0;
hose->last_busno = 0xff; hose->last_busno = 0xff;
#ifdef CONFIG_ADS8272
hose->set_cfg_type = 1;
#endif
setup_m8260_indirect_pci(hose, setup_m8260_indirect_pci(hose,
(unsigned long)&cpm2_immr->im_pci.pci_cfg_addr, (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr,
(unsigned long)&cpm2_immr->im_pci.pci_cfg_data); (unsigned long)&cpm2_immr->im_pci.pci_cfg_data);
......
arch/ppc/syslib/m8xx_setup.c
View file @ 36a23fc8
...@@ -139,16 +139,6 @@ m8xx_setup_arch(void) ...@@ -139,16 +139,6 @@ m8xx_setup_arch(void)
} }
} }
#endif #endif
#endif
#if defined (CONFIG_MPC86XADS) || defined (CONFIG_MPC885ADS)
#if defined(CONFIG_MTD_PHYSMAP)
physmap_configure(binfo->bi_flashstart, binfo->bi_flashsize,
MPC8xxADS_BANK_WIDTH, NULL);
#ifdef CONFIG_MTD_PARTITIONS
physmap_set_partitions(mpc8xxads_partitions, mpc8xxads_part_num);
#endif /* CONFIG_MTD_PARTITIONS */
#endif /* CONFIG_MTD_PHYSMAP */
#endif #endif
board_init(); board_init();
......
include/asm-ppc/mpc8260.h
View file @ 36a23fc8
...@@ -35,10 +35,6 @@ ...@@ -35,10 +35,6 @@
#include <platforms/tqm8260.h> #include <platforms/tqm8260.h>
#endif #endif
#if defined(CONFIG_PQ2ADS) || defined (CONFIG_PQ2FADS)
#include <platforms/pq2ads.h>
#endif
#ifdef CONFIG_PCI_8260 #ifdef CONFIG_PCI_8260
#include <syslib/m82xx_pci.h> #include <syslib/m82xx_pci.h>
#endif #endif
......
include/asm-ppc/mpc8xx.h
View file @ 36a23fc8
...@@ -63,10 +63,6 @@ ...@@ -63,10 +63,6 @@
#include <platforms/lantec.h> #include <platforms/lantec.h>
#endif #endif
#if defined(CONFIG_MPC885ADS)
#include <platforms/mpc885ads.h>
#endif
/* Currently, all 8xx boards that support a processor to PCI/ISA bridge /* Currently, all 8xx boards that support a processor to PCI/ISA bridge
* use the same memory map. * use the same memory map.
*/ */
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7