Skip to content

L
linux
Commit 36b8659f authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge master.kernel.org:/home/rmk/linux-2.6-arm 

* master.kernel.org:/home/rmk/linux-2.6-arm: (30 commits)
  ARM: 5639/1: arm: clkdev.c should include <linux/clk.h>
  ARM: 5638/1: arch/arm/kernel/signal.c: use correct address space for CRUNCH
  ARM: 5637/1: [KS8695] Don't reference CLOCK_TICK_RATE in drivers
  ARM: S3C64XX: serial: Fix section mismatch warning
  ARM: S3C24XX: serial: Fix section mismatch warnings
  ARM: S3C: PWM fix for low duty cycle
  ARM: 5597/1: [PCI] reset all internal hardware prior PCI initialization
  ARM: 5627/1: Fix restoring of lr at the end of mcount
  ARM: 5624/1: Document cache aliasing region
  S3C64XX: Fix ARMCLK configuration
  S3C64XX: Fix get_rate() for ARMCLK
  S3C24XX: GPIO: Fix pin range check in s3c_gpiolib_getchip
  mx3 defconfig update
  mx27 defconfig update
  ARM: 5623/1: Treo680: ir shutdown typo fix
  ARM: includecheck fix: plat-stmp3xxx/pinmux.c
  ARM: includecheck fix: plat-s3c64xx/pm.c
  ARM: includecheck fix: mach-omap2/mcbsp.c
  ARM: includecheck fix: mach-omap1/mcbsp.c
  ARM: includecheck fix: board-sffsdr.c
  ...
parents cba8784a c0c60c4b
Hide whitespace changes
Inline Side-by-side
Showing with 372 additions and 191 deletions
Documentation/arm/memory.txt
View file @ 36b8659f
......@@ -21,6 +21,8 @@ ffff8000 ffffffff copy_user_page / clear_user_page use.
For SA11xx and Xscale, this is used to
setup a minicache mapping.
ffff4000 ffffffff cache aliasing on ARMv6 and later CPUs.
ffff1000 ffff7fff Reserved.
Platforms must not use this address range.
......
arch/arm/boot/compressed/misc.c
View file @ 36b8659f
......@@ -29,7 +29,6 @@ unsigned int __machine_arch_type;
static void putstr(const char *ptr);
#include <linux/compiler.h>
#include <mach/uncompress.h>
#ifdef CONFIG_DEBUG_ICEDCC
......
arch/arm/common/clkdev.c
View file @ 36b8659f
......@@ -17,6 +17,7 @@
#include <linux/err.h>
#include <linux/string.h>
#include <linux/mutex.h>
#include <linux/clk.h>
#include <asm/clkdev.h>
#include <mach/clkdev.h>
......
arch/arm/configs/mx27_defconfig
View file @ 36b8659f
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.30-rc1
# Wed Apr 8 10:18:06 2009
# Linux kernel version: 2.6.31-rc4
# Fri Jul 24 16:08:06 2009
#
CONFIG_ARM=y
CONFIG_HAVE_PWM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
......@@ -18,14 +18,13 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
......@@ -85,7 +84,12 @@ CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
#
# Performance Counters
#
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
......@@ -99,6 +103,12 @@ CONFIG_KPROBES=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_CLK=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
......@@ -111,7 +121,7 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
......@@ -138,13 +148,14 @@ CONFIG_FREEZER=y
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
CONFIG_ARCH_MXC=y
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
......@@ -153,25 +164,25 @@ CONFIG_FREEZER=y
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
CONFIG_ARCH_MXC=y
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_W90X900 is not set
#
# Freescale MXC Implementations
......@@ -188,6 +199,8 @@ CONFIG_MACH_MX27=y
CONFIG_MACH_MX27ADS=y
CONFIG_MACH_PCM038=y
CONFIG_MACH_PCM970_BASEBOARD=y
CONFIG_MACH_MX27_3DS=y
CONFIG_MACH_MX27LITE=y
CONFIG_MXC_IRQ_PRIOR=y
CONFIG_MXC_PWM=y
......@@ -213,7 +226,6 @@ CONFIG_ARM_THUMB=y
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
# CONFIG_OUTER_CACHE is not set
CONFIG_COMMON_CLKDEV=y
#
......@@ -238,7 +250,6 @@ CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
......@@ -253,10 +264,11 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
......@@ -361,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
......@@ -474,7 +487,16 @@ CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_NAND is not set
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_NAND_MXC=y
# CONFIG_MTD_ONENAND is not set
#
......@@ -485,7 +507,15 @@ CONFIG_MTD_PHYSMAP=y
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
# CONFIG_MTD_UBI_GLUEBI is not set
#
# UBI debugging options
#
# CONFIG_MTD_UBI_DEBUG is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
......@@ -494,7 +524,21 @@ CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_MG_DISK is not set
CONFIG_MISC_DEVICES=y
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
......@@ -508,7 +552,6 @@ CONFIG_HAVE_IDE=y
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
......@@ -534,6 +577,8 @@ CONFIG_NET_ETHERNET=y
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
CONFIG_FEC=y
# CONFIG_FEC2 is not set
# CONFIG_NETDEV_1000 is not set
......@@ -580,6 +625,11 @@ CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
......@@ -592,6 +642,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_INPUT_MISC is not set
#
......@@ -644,6 +695,7 @@ CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_IMX=y
# CONFIG_I2C_OCORES is not set
......@@ -668,7 +720,6 @@ CONFIG_I2C_IMX=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
......@@ -719,6 +770,7 @@ CONFIG_W1=y
#
# CONFIG_W1_MASTER_DS2482 is not set
CONFIG_W1_MASTER_MXC=y
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set
#
......@@ -753,54 +805,16 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_COMMON=y
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_MEDIA=y
#
# Multimedia drivers
#
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=y
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_SOC_CAMERA is not set
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
......@@ -917,6 +931,7 @@ CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
......@@ -962,12 +977,15 @@ CONFIG_RTC_DRV_PCF8563=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
......@@ -1021,6 +1039,12 @@ CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_UBIFS_FS=y
# CONFIG_UBIFS_FS_XATTR is not set
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
......@@ -1119,25 +1143,11 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
......@@ -1151,16 +1161,104 @@ CONFIG_ARM_UNWIND=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
......@@ -1168,6 +1266,8 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
......
arch/arm/configs/mx3_defconfig
View file @ 36b8659f
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.30-rc1
# Wed Apr 8 11:06:37 2009
# Linux kernel version: 2.6.31-rc4
# Tue Jul 28 14:11:34 2009
#
CONFIG_ARM=y
CONFIG_HAVE_PWM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
......@@ -18,14 +18,13 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
......@@ -86,7 +85,12 @@ CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
#
# Performance Counters
#
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
......@@ -97,6 +101,11 @@ CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_CLK=y
#
# GCOV-based kernel profiling
#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
......@@ -109,7 +118,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
......@@ -136,13 +145,14 @@ CONFIG_FREEZER=y
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
CONFIG_ARCH_MXC=y
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
......@@ -151,25 +161,25 @@ CONFIG_FREEZER=y
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
CONFIG_ARCH_MXC=y
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_W90X900 is not set
#
# Freescale MXC Implementations
......@@ -178,6 +188,7 @@ CONFIG_ARCH_MXC=y
# CONFIG_ARCH_MX2 is not set
CONFIG_ARCH_MX3=y
CONFIG_ARCH_MX31=y
CONFIG_ARCH_MX35=y
#
# MX3 platforms:
......@@ -185,12 +196,19 @@ CONFIG_ARCH_MX31=y
CONFIG_MACH_MX31ADS=y
CONFIG_MACH_MX31ADS_WM1133_EV1=y
CONFIG_MACH_PCM037=y
CONFIG_MACH_PCM037_EET=y
CONFIG_MACH_MX31LITE=y
CONFIG_MACH_MX31_3DS=y
CONFIG_MACH_MX31MOBOARD=y
CONFIG_MACH_MX31LILLY=y
CONFIG_MACH_QONG=y
CONFIG_MACH_PCM043=y
CONFIG_MACH_ARMADILLO5X0=y
CONFIG_MACH_MX35_3DS=y
CONFIG_MXC_IRQ_PRIOR=y
CONFIG_MXC_PWM=y
CONFIG_ARCH_HAS_RNGA=y
CONFIG_ARCH_MXC_IOMUX_V3=y
#
# Processor Type
......@@ -218,6 +236,7 @@ CONFIG_ARM_THUMB=y
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_OUTER_CACHE=y
CONFIG_CACHE_L2X0=y
# CONFIG_ARM_ERRATA_411920 is not set
CONFIG_COMMON_CLKDEV=y
#
......@@ -242,7 +261,6 @@ CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
......@@ -257,10 +275,11 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
......@@ -362,6 +381,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
......@@ -465,7 +485,16 @@ CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_NAND is not set
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
CONFIG_MTD_NAND_MXC=y
# CONFIG_MTD_ONENAND is not set
#
......@@ -476,10 +505,30 @@ CONFIG_MTD_PHYSMAP=y
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
# CONFIG_MTD_UBI_GLUEBI is not set
#
# UBI debugging options
#
# CONFIG_MTD_UBI_DEBUG is not set
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_MISC_DEVICES=y
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
......@@ -493,7 +542,6 @@ CONFIG_HAVE_IDE=y
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
......@@ -528,7 +576,7 @@ CONFIG_MII=y
# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
CONFIG_SMSC911X=y
# CONFIG_DNET is not set
CONFIG_DNET=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
......@@ -537,8 +585,10 @@ CONFIG_SMSC911X=y
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_CS89x0=y
CONFIG_CS89x0_NONISA_IRQ=y
# CONFIG_CS89x0 is not set
# CONFIG_KS8842 is not set
CONFIG_FEC=y
# CONFIG_FEC2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
......@@ -609,6 +659,7 @@ CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_IMX=y
# CONFIG_I2C_OCORES is not set
......@@ -633,7 +684,6 @@ CONFIG_I2C_IMX=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
......@@ -669,6 +719,7 @@ CONFIG_W1=y
#
# CONFIG_W1_MASTER_DS2482 is not set
CONFIG_W1_MASTER_MXC=y
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set
#
......@@ -703,6 +754,8 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
......@@ -711,10 +764,8 @@ CONFIG_MFD_WM8350_CONFIG_MODE_0=y
CONFIG_MFD_WM8352_CONFIG_MODE_0=y
CONFIG_MFD_WM8350_I2C=y
# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
#
# CONFIG_AB3100_CORE is not set
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
......@@ -758,8 +809,10 @@ CONFIG_SOC_CAMERA_MT9T031=y
CONFIG_SOC_CAMERA_MT9V022=y
CONFIG_SOC_CAMERA_TW9910=y
# CONFIG_SOC_CAMERA_PLATFORM is not set
# CONFIG_SOC_CAMERA_OV772X is not set
CONFIG_SOC_CAMERA_OV772X=y
CONFIG_MX3_VIDEO=y
CONFIG_VIDEO_MX3=y
# CONFIG_VIDEO_SH_MOBILE_CEU is not set
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set
......@@ -847,8 +900,11 @@ CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_WM8350=y
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
......@@ -861,10 +917,12 @@ CONFIG_REGULATOR_WM8350=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
......@@ -921,6 +979,12 @@ CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_UBIFS_FS=y
# CONFIG_UBIFS_FS_XATTR is not set
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
......@@ -937,6 +1001,7 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
......@@ -979,22 +1044,7 @@ CONFIG_FRAME_WARN=1024
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_ARM_UNWIND=y
......@@ -1094,9 +1144,9 @@ CONFIG_CRYPTO_DES=y
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
......@@ -1109,9 +1159,10 @@ CONFIG_CRYPTO_HW=y
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
......@@ -1119,6 +1170,8 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
......
arch/arm/include/asm/atomic.h
View file @ 36b8659f
......@@ -159,8 +159,6 @@ static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
#else /* ARM_ARCH_6 */
#include <asm/system.h>
#ifdef CONFIG_SMP
#error SMP not supported on pre-ARMv6 CPUs
#endif
......
arch/arm/kernel/entry-common.S
View file @ 36b8659f
......@@ -148,7 +148,7 @@ trace:
sub r0, r0, #MCOUNT_INSN_SIZE
mov lr, pc
mov pc, r2
mov lr, r1 @ restore lr
ldr lr, [fp, #-4] @ restore lr
ldmia sp!, {r0-r3, pc}
#endif /* CONFIG_DYNAMIC_FTRACE */
......
arch/arm/kernel/signal.c
View file @ 36b8659f
......@@ -133,7 +133,7 @@ sys_sigaction(int sig, const struct old_sigaction __user *act,
}
#ifdef CONFIG_CRUNCH
static int preserve_crunch_context(struct crunch_sigframe *frame)
static int preserve_crunch_context(struct crunch_sigframe __user *frame)
{
char kbuf[sizeof(*frame) + 8];
struct crunch_sigframe *kframe;
......@@ -146,7 +146,7 @@ static int preserve_crunch_context(struct crunch_sigframe *frame)
return __copy_to_user(frame, kframe, sizeof(*frame));
}
static int restore_crunch_context(struct crunch_sigframe *frame)
static int restore_crunch_context(struct crunch_sigframe __user *frame)
{
char kbuf[sizeof(*frame) + 8];
struct crunch_sigframe *kframe;
......
arch/arm/mach-davinci/board-dm355-evm.c
View file @ 36b8659f
......@@ -37,7 +37,6 @@
#include <mach/serial.h>
#include <mach/nand.h>
#include <mach/mmc.h>
#include <mach/common.h>
#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000
#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
......
arch/arm/mach-davinci/board-dm355-leopard.c
View file @ 36b8659f
......@@ -36,7 +36,6 @@
#include <mach/serial.h>
#include <mach/nand.h>
#include <mach/mmc.h>
#include <mach/common.h>
#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000
#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
......
arch/arm/mach-davinci/board-dm644x-evm.c
View file @ 36b8659f
......@@ -45,7 +45,6 @@
#include <mach/nand.h>
#include <mach/mmc.h>
#include <mach/emac.h>
#include <mach/common.h>
#define DM644X_EVM_PHY_MASK (0x2)
#define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
......
arch/arm/mach-davinci/board-dm646x-evm.c
View file @ 36b8659f
......@@ -47,7 +47,6 @@
#include <mach/i2c.h>
#include <mach/mmc.h>
#include <mach/emac.h>
#include <mach/common.h>
#define DM646X_EVM_PHY_MASK (0x2)
#define DM646X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
......
arch/arm/mach-davinci/board-sffsdr.c
View file @ 36b8659f
......@@ -52,7 +52,6 @@
#include <mach/serial.h>
#include <mach/psc.h>
#include <mach/mux.h>
#include <mach/common.h>
#define SFFSDR_PHY_MASK (0x2)
#define SFFSDR_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
......
arch/arm/mach-ep93xx/include/mach/ts72xx.h
View file @ 36b8659f
......@@ -41,9 +41,6 @@
#define TS72XX_OPTIONS2_TS9420_BOOT 0x02
#define TS72XX_NOR_PHYS_BASE 0x60000000
#define TS72XX_NOR2_PHYS_BASE 0x62000000
#define TS72XX_NAND1_DATA_PHYS_BASE 0x60000000
#define TS72XX_NAND2_DATA_PHYS_BASE 0x70000000
#define TS72XX_NAND_DATA_VIRT_BASE 0xfebfc000
......
arch/arm/mach-ep93xx/ts72xx.c
View file @ 36b8659f
......@@ -112,13 +112,16 @@ static void __init ts72xx_map_io(void)
}
}
/*************************************************************************
* NOR flash (TS-7200 only)
*************************************************************************/
static struct physmap_flash_data ts72xx_flash_data = {
.width = 1,
.width = 2,
};
static struct resource ts72xx_flash_resource = {
.start = TS72XX_NOR_PHYS_BASE,
.end = TS72XX_NOR_PHYS_BASE + SZ_16M - 1,
.start = EP93XX_CS6_PHYS_BASE,
.end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
.flags = IORESOURCE_MEM,
};
......@@ -132,6 +135,12 @@ static struct platform_device ts72xx_flash = {
.resource = &ts72xx_flash_resource,
};
static void __init ts72xx_register_flash(void)
{
if (board_is_ts7200())
platform_device_register(&ts72xx_flash);
}
static unsigned char ts72xx_rtc_readbyte(unsigned long addr)
{
__raw_writeb(addr, TS72XX_RTC_INDEX_VIRT_BASE);
......@@ -165,8 +174,7 @@ static struct ep93xx_eth_data ts72xx_eth_data = {
static void __init ts72xx_init_machine(void)
{
ep93xx_init_devices();
if (board_is_ts7200())
platform_device_register(&ts72xx_flash);
ts72xx_register_flash();
platform_device_register(&ts72xx_rtc_device);
ep93xx_register_eth(&ts72xx_eth_data, 1);
......
arch/arm/mach-ks8695/include/mach/hardware.h
View file @ 36b8659f
......@@ -16,6 +16,11 @@
#include <asm/sizes.h>
/*
* Clocks are derived from MCLK, which is 25Mhz
*/
#define KS8695_CLOCK_RATE 25000000
/*
* Physical RAM address.
*/
......
arch/arm/mach-ks8695/include/mach/timex.h
View file @ 36b8659f
......@@ -14,7 +14,8 @@
#ifndef __ASM_ARCH_TIMEX_H
#define __ASM_ARCH_TIMEX_H
/* timers are derived from MCLK, which is 25MHz */
#define CLOCK_TICK_RATE 25000000
#include <mach/hardware.h>
#define CLOCK_TICK_RATE KS8695_CLOCK_RATE
#endif
arch/arm/mach-ks8695/pci.c
View file @ 36b8659f
......@@ -245,6 +245,9 @@ static int ks8695_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs
static void __init ks8695_pci_preinit(void)
{
/* make software reset to avoid freeze if PCI bus was messed up */
__raw_writel(0x80000000, KS8695_PCI_VA + KS8695_PBCS);
/* stage 1 initialization, subid, subdevice = 0x0001 */
__raw_writel(0x00010001, KS8695_PCI_VA + KS8695_CRCSID);
......
arch/arm/mach-omap1/mcbsp.c
View file @ 36b8659f
......@@ -19,7 +19,6 @@
#include <mach/irqs.h>
#include <mach/dma.h>
#include <mach/irqs.h>
#include <mach/mux.h>
#include <mach/cpu.h>
#include <mach/mcbsp.h>
......
arch/arm/mach-omap2/mcbsp.c
View file @ 36b8659f
......@@ -19,7 +19,6 @@
#include <mach/irqs.h>
#include <mach/dma.h>
#include <mach/irqs.h>
#include <mach/mux.h>
#include <mach/cpu.h>
#include <mach/mcbsp.h>
......
arch/arm/mach-pxa/em-x270.c
View file @ 36b8659f
......@@ -1141,12 +1141,16 @@ struct power_supply_info em_x270_psy_info = {
static void em_x270_battery_low(void)
{
#if defined(CONFIG_APM_EMULATION)
apm_queue_event(APM_LOW_BATTERY);
#endif
}
static void em_x270_battery_critical(void)
{
#if defined(CONFIG_APM_EMULATION)
apm_queue_event(APM_CRITICAL_SUSPEND);
#endif
}
struct da9030_battery_info em_x270_batterty_info = {
......
arch/arm/mach-pxa/palmld.c
View file @ 36b8659f
......@@ -128,6 +128,10 @@ static unsigned long palmld_pin_config[] __initdata = {
GPIO38_GPIO, /* wifi ready */
GPIO81_GPIO, /* wifi reset */
/* FFUART */
GPIO34_FFUART_RXD,
GPIO39_FFUART_TXD,
/* HDD */
GPIO98_GPIO, /* HDD reset */
GPIO115_GPIO, /* HDD power */
......
arch/arm/mach-pxa/palmt5.c
View file @ 36b8659f
......@@ -111,6 +111,10 @@ static unsigned long palmt5_pin_config[] __initdata = {
/* PWM */
GPIO16_PWM0_OUT,
/* FFUART */
GPIO34_FFUART_RXD,
GPIO39_FFUART_TXD,
/* MISC */
GPIO10_GPIO, /* hotsync button */
GPIO90_GPIO, /* power detect */
......
arch/arm/mach-pxa/palmtx.c
View file @ 36b8659f
......@@ -127,6 +127,10 @@ static unsigned long palmtx_pin_config[] __initdata = {
GPIO76_LCD_PCLK,
GPIO77_LCD_BIAS,
/* FFUART */
GPIO34_FFUART_RXD,
GPIO39_FFUART_TXD,
/* MISC. */
GPIO10_GPIO, /* hotsync button */
GPIO12_GPIO, /* power detect */
......
arch/arm/mach-pxa/treo680.c
View file @ 36b8659f
......@@ -409,7 +409,7 @@ static int treo680_irda_startup(struct device *dev)
static void treo680_irda_shutdown(struct device *dev)
{
gpio_free(GPIO_NR_TREO680_AMP_EN);
gpio_free(GPIO_NR_TREO680_IR_EN);
}
static struct pxaficp_platform_data treo680_ficp_info = {
......
arch/arm/mach-pxa/zylonite_pxa300.c
View file @ 36b8659f
......@@ -197,10 +197,12 @@ static void __init zylonite_detect_lcd_panel(void)
for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
id = id << 1;
gpio = mfp_to_gpio(lcd_detect_pins[i]);
gpio_request(gpio, "LCD_ID_PINS");
gpio_direction_input(gpio);
if (gpio_get_value(gpio))
id = id | 0x1;
gpio_free(gpio);
}
/* lcd id, flush out bit 1 */
......
arch/arm/mach-pxa/zylonite_pxa320.c
View file @ 36b8659f
......@@ -176,10 +176,12 @@ static void __init zylonite_detect_lcd_panel(void)
for (i = 0; i < NUM_LCD_DETECT_PINS; i++) {
id = id << 1;
gpio = mfp_to_gpio(lcd_detect_pins[i]);
gpio_request(gpio, "LCD_ID_PINS");
gpio_direction_input(gpio);
if (gpio_get_value(gpio))
id = id | 0x1;
gpio_free(gpio);
}
/* lcd id, flush out bit 1 */
......
arch/arm/mach-s3c2410/include/mach/gpio-core.h
View file @ 36b8659f
......@@ -28,7 +28,7 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
return NULL;
chip = &s3c24xx_gpios[pin/32];
return (S3C2410_GPIO_OFFSET(pin) > chip->chip.ngpio) ? chip : NULL;
return (S3C2410_GPIO_OFFSET(pin) < chip->chip.ngpio) ? chip : NULL;
}
#endif /* __ASM_ARCH_GPIO_CORE_H */
arch/arm/plat-s3c24xx/pwm.c
View file @ 36b8659f
......@@ -246,6 +246,10 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
tcmp = duty_ns / tin_ns;
tcmp = tcnt - tcmp;
/* the pwm hw only checks the compare register after a decrement,
so the pin never toggles if tcmp = tcnt */
if (tcmp == tcnt)
tcmp--;
pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt);
......
arch/arm/plat-s3c64xx/pm.c
View file @ 36b8659f
......@@ -117,8 +117,6 @@ void s3c_pm_save_core(void)
* this.
*/
#include <plat/regs-gpio.h>
static void s3c64xx_cpu_suspend(void)
{
unsigned long tmp;
......
arch/arm/plat-s3c64xx/s3c6400-clock.c
View file @ 36b8659f
......@@ -153,7 +153,7 @@ static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
u32 div;
if (parent < rate)
return rate;
return parent;
div = (parent / rate) - 1;
if (div > armclk_mask)
......@@ -175,7 +175,7 @@ static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
div = clk_get_rate(clk->parent) / rate;
val = __raw_readl(S3C_CLK_DIV0);
val &= armclk_mask;
val &= ~armclk_mask;
val |= (div - 1);
__raw_writel(val, S3C_CLK_DIV0);
......
arch/arm/plat-stmp3xxx/pinmux.c
View file @ 36b8659f
......@@ -22,7 +22,6 @@
#include <linux/sysdev.h>
#include <linux/string.h>
#include <linux/bitops.h>
#include <linux/sysdev.h>
#include <linux/irq.h>
#include <mach/hardware.h>
......
drivers/serial/s3c2400.c
View file @ 36b8659f
......@@ -76,7 +76,7 @@ static int s3c2400_serial_probe(struct platform_device *dev)
return s3c24xx_serial_probe(dev, &s3c2400_uart_inf);
}
static struct platform_driver s3c2400_serial_drv = {
static struct platform_driver s3c2400_serial_driver = {
.probe = s3c2400_serial_probe,
.remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
......@@ -85,16 +85,16 @@ static struct platform_driver s3c2400_serial_drv = {
},
};
s3c24xx_console_init(&s3c2400_serial_drv, &s3c2400_uart_inf);
s3c24xx_console_init(&s3c2400_serial_driver, &s3c2400_uart_inf);
static inline int s3c2400_serial_init(void)
{
return s3c24xx_serial_init(&s3c2400_serial_drv, &s3c2400_uart_inf);
return s3c24xx_serial_init(&s3c2400_serial_driver, &s3c2400_uart_inf);
}
static inline void s3c2400_serial_exit(void)
{
platform_driver_unregister(&s3c2400_serial_drv);
platform_driver_unregister(&s3c2400_serial_driver);
}
module_init(s3c2400_serial_init);
......
drivers/serial/s3c2410.c
View file @ 36b8659f
......@@ -88,7 +88,7 @@ static int s3c2410_serial_probe(struct platform_device *dev)
return s3c24xx_serial_probe(dev, &s3c2410_uart_inf);
}
static struct platform_driver s3c2410_serial_drv = {
static struct platform_driver s3c2410_serial_driver = {
.probe = s3c2410_serial_probe,
.remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
......@@ -97,16 +97,16 @@ static struct platform_driver s3c2410_serial_drv = {
},
};
s3c24xx_console_init(&s3c2410_serial_drv, &s3c2410_uart_inf);
s3c24xx_console_init(&s3c2410_serial_driver, &s3c2410_uart_inf);
static int __init s3c2410_serial_init(void)
{
return s3c24xx_serial_init(&s3c2410_serial_drv, &s3c2410_uart_inf);
return s3c24xx_serial_init(&s3c2410_serial_driver, &s3c2410_uart_inf);
}
static void __exit s3c2410_serial_exit(void)
{
platform_driver_unregister(&s3c2410_serial_drv);
platform_driver_unregister(&s3c2410_serial_driver);
}
module_init(s3c2410_serial_init);
......
drivers/serial/s3c2412.c
View file @ 36b8659f
......@@ -121,7 +121,7 @@ static int s3c2412_serial_probe(struct platform_device *dev)
return s3c24xx_serial_probe(dev, &s3c2412_uart_inf);
}
static struct platform_driver s3c2412_serial_drv = {
static struct platform_driver s3c2412_serial_driver = {
.probe = s3c2412_serial_probe,
.remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
......@@ -130,16 +130,16 @@ static struct platform_driver s3c2412_serial_drv = {
},
};
s3c24xx_console_init(&s3c2412_serial_drv, &s3c2412_uart_inf);
s3c24xx_console_init(&s3c2412_serial_driver, &s3c2412_uart_inf);
static inline int s3c2412_serial_init(void)
{
return s3c24xx_serial_init(&s3c2412_serial_drv, &s3c2412_uart_inf);
return s3c24xx_serial_init(&s3c2412_serial_driver, &s3c2412_uart_inf);
}
static inline void s3c2412_serial_exit(void)
{
platform_driver_unregister(&s3c2412_serial_drv);
platform_driver_unregister(&s3c2412_serial_driver);
}
module_init(s3c2412_serial_init);
......
drivers/serial/s3c2440.c
View file @ 36b8659f
......@@ -151,7 +151,7 @@ static int s3c2440_serial_probe(struct platform_device *dev)
return s3c24xx_serial_probe(dev, &s3c2440_uart_inf);
}
static struct platform_driver s3c2440_serial_drv = {
static struct platform_driver s3c2440_serial_driver = {
.probe = s3c2440_serial_probe,
.remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
......@@ -160,16 +160,16 @@ static struct platform_driver s3c2440_serial_drv = {
},
};
s3c24xx_console_init(&s3c2440_serial_drv, &s3c2440_uart_inf);
s3c24xx_console_init(&s3c2440_serial_driver, &s3c2440_uart_inf);
static int __init s3c2440_serial_init(void)
{
return s3c24xx_serial_init(&s3c2440_serial_drv, &s3c2440_uart_inf);
return s3c24xx_serial_init(&s3c2440_serial_driver, &s3c2440_uart_inf);
}
static void __exit s3c2440_serial_exit(void)
{
platform_driver_unregister(&s3c2440_serial_drv);
platform_driver_unregister(&s3c2440_serial_driver);
}
module_init(s3c2440_serial_init);
......
drivers/serial/s3c24a0.c
View file @ 36b8659f
......@@ -92,7 +92,7 @@ static int s3c24a0_serial_probe(struct platform_device *dev)
return s3c24xx_serial_probe(dev, &s3c24a0_uart_inf);
}
static struct platform_driver s3c24a0_serial_drv = {
static struct platform_driver s3c24a0_serial_driver = {
.probe = s3c24a0_serial_probe,
.remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
......@@ -101,16 +101,16 @@ static struct platform_driver s3c24a0_serial_drv = {
},
};
s3c24xx_console_init(&s3c24a0_serial_drv, &s3c24a0_uart_inf);
s3c24xx_console_init(&s3c24a0_serial_driver, &s3c24a0_uart_inf);
static int __init s3c24a0_serial_init(void)
{
return s3c24xx_serial_init(&s3c24a0_serial_drv, &s3c24a0_uart_inf);
return s3c24xx_serial_init(&s3c24a0_serial_driver, &s3c24a0_uart_inf);
}
static void __exit s3c24a0_serial_exit(void)
{
platform_driver_unregister(&s3c24a0_serial_drv);
platform_driver_unregister(&s3c24a0_serial_driver);
}
module_init(s3c24a0_serial_init);
......
drivers/serial/s3c6400.c
View file @ 36b8659f
......@@ -122,7 +122,7 @@ static int s3c6400_serial_probe(struct platform_device *dev)
return s3c24xx_serial_probe(dev, &s3c6400_uart_inf);
}
static struct platform_driver s3c6400_serial_drv = {
static struct platform_driver s3c6400_serial_driver = {
.probe = s3c6400_serial_probe,
.remove = __devexit_p(s3c24xx_serial_remove),
.driver = {
......@@ -131,16 +131,16 @@ static struct platform_driver s3c6400_serial_drv = {
},
};
s3c24xx_console_init(&s3c6400_serial_drv, &s3c6400_uart_inf);
s3c24xx_console_init(&s3c6400_serial_driver, &s3c6400_uart_inf);
static int __init s3c6400_serial_init(void)
{
return s3c24xx_serial_init(&s3c6400_serial_drv, &s3c6400_uart_inf);
return s3c24xx_serial_init(&s3c6400_serial_driver, &s3c6400_uart_inf);
}
static void __exit s3c6400_serial_exit(void)
{
platform_driver_unregister(&s3c6400_serial_drv);
platform_driver_unregister(&s3c6400_serial_driver);
}
module_init(s3c6400_serial_init);
......
drivers/serial/serial_ks8695.c
View file @ 36b8659f
......@@ -549,7 +549,7 @@ static struct uart_port ks8695uart_ports[SERIAL_KS8695_NR] = {
.mapbase = KS8695_UART_VA,
.iotype = SERIAL_IO_MEM,
.irq = KS8695_IRQ_UART_TX,
.uartclk = CLOCK_TICK_RATE * 16,
.uartclk = KS8695_CLOCK_RATE * 16,
.fifosize = 16,
.ops = &ks8695uart_pops,
.flags = ASYNC_BOOT_AUTOCONF,
......
drivers/watchdog/ks8695_wdt.c
View file @ 36b8659f
......@@ -66,7 +66,7 @@ static inline void ks8695_wdt_stop(void)
static inline void ks8695_wdt_start(void)
{
unsigned long tmcon;
unsigned long tval = wdt_time * CLOCK_TICK_RATE;
unsigned long tval = wdt_time * KS8695_CLOCK_RATE;
spin_lock(&ks8695_lock);
/* disable timer0 */
......@@ -103,7 +103,7 @@ static inline void ks8695_wdt_reload(void)
static int ks8695_wdt_settimeout(int new_time)
{
/*
* All counting occurs at SLOW_CLOCK / 128 = 0.256 Hz
* All counting occurs at KS8695_CLOCK_RATE / 128 = 0.256 Hz
*
* Since WDV is a 16-bit counter, the maximum period is
* 65536 / 0.256 = 256 seconds.
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7