USB: pl2303: remove 80-columns limit violations in pl2303 driver

Fixes several lines that overrun 80 columns in Prolific pl2303 driver
and cleans up some space usages in the function calls.
Signed-off-by: Thiago Galesi <thiagogalesi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/serial/pl2303.c

@@ -84,7 +84,7 @@ static struct usb_device_id id_table [] = {
 	{ }					/* Terminating entry */
 };
 
-MODULE_DEVICE_TABLE (usb, id_table);
+MODULE_DEVICE_TABLE(usb, id_table);
 
 static struct usb_driver pl2303_driver = {
 	.name =		"pl2303",
@@ -205,7 +205,7 @@ struct pl2303_private {
 };
 
 
-static int pl2303_startup (struct usb_serial *serial)
+static int pl2303_startup(struct usb_serial *serial)
 {
 	struct pl2303_private *priv;
 	enum pl2303_type type = type_0;
@@ -247,18 +247,19 @@ static int pl2303_startup (struct usb_serial *serial)
 	return -ENOMEM;
 }
 
-static int set_control_lines (struct usb_device *dev, u8 value)
+static int set_control_lines(struct usb_device *dev, u8 value)
 {
 	int retval;
 	
-	retval = usb_control_msg (dev, usb_sndctrlpipe (dev, 0),
+	retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 				 SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE,
 				 value, 0, NULL, 0, 100);
 	dbg("%s - value = %d, retval = %d", __FUNCTION__, value, retval);
 	return retval;
 }
 
-static int pl2303_write (struct usb_serial_port *port,  const unsigned char *buf, int count)
+static int pl2303_write(struct usb_serial_port *port, const unsigned char *buf,
+			int count)
 {
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
@@ -304,13 +305,15 @@ static void pl2303_send(struct usb_serial_port *port)
 
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, port->write_urb->transfer_buffer);
+	usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count,
+			      port->write_urb->transfer_buffer);
 
 	port->write_urb->transfer_buffer_length = count;
 	port->write_urb->dev = port->serial->dev;
-	result = usb_submit_urb (port->write_urb, GFP_ATOMIC);
+	result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 	if (result) {
-		dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__, result);
+		dev_err(&port->dev, "%s - failed submitting write urb,"
+			" error %d\n", __FUNCTION__, result);
 		priv->write_urb_in_use = 0;
 		// TODO: reschedule pl2303_send
 	}
@@ -350,7 +353,8 @@ static int pl2303_chars_in_buffer(struct usb_serial_port *port)
 	return chars;
 }
 
-static void pl2303_set_termios (struct usb_serial_port *port, struct termios *old_termios)
+static void pl2303_set_termios(struct usb_serial_port *port,
+			       struct termios *old_termios)
 {
 	struct usb_serial *serial = port->serial;
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
@@ -371,7 +375,8 @@ static void pl2303_set_termios (struct usb_serial_port *port, struct termios *ol
 	spin_lock_irqsave(&priv->lock, flags);
 	if (!priv->termios_initialized) {
 		*(port->tty->termios) = tty_std_termios;
-		port->tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+		port->tty->termios->c_cflag = B9600 | CS8 | CREAD |
+					      HUPCL | CLOCAL;
 		priv->termios_initialized = 1;
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);
@@ -380,25 +385,25 @@ static void pl2303_set_termios (struct usb_serial_port *port, struct termios *ol
 	/* check that they really want us to change something */
 	if (old_termios) {
 		if ((cflag == old_termios->c_cflag) &&
-		    (RELEVANT_IFLAG(port->tty->termios->c_iflag) == RELEVANT_IFLAG(old_termios->c_iflag))) {
+		    (RELEVANT_IFLAG(port->tty->termios->c_iflag) ==
+		     RELEVANT_IFLAG(old_termios->c_iflag))) {
 			dbg("%s - nothing to change...", __FUNCTION__);
 			return;
 		}
 	}
 
-	buf = kzalloc (7, GFP_KERNEL);
+	buf = kzalloc(7, GFP_KERNEL);
 	if (!buf) {
 		dev_err(&port->dev, "%s - out of memory.\n", __FUNCTION__);
 		return;
 	}
 
-	i = usb_control_msg (serial->dev, usb_rcvctrlpipe (serial->dev, 0),
+	i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 			    GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
 			    0, 0, buf, 7, 100);
-	dbg ("0xa1:0x21:0:0  %d - %x %x %x %x %x %x %x", i,
+	dbg("0xa1:0x21:0:0  %d - %x %x %x %x %x %x %x", i,
 	    buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
 
-
 	if (cflag & CSIZE) {
 		switch (cflag & CSIZE) {
 			case CS5:	buf[6] = 5;	break;
@@ -429,7 +434,8 @@ static void pl2303_set_termios (struct usb_serial_port *port, struct termios *ol
 		case B230400:	baud = 230400;	break;
 		case B460800:	baud = 460800;	break;
 		default:
-			dev_err(&port->dev, "pl2303 driver does not support the baudrate requested (fix it)\n");
+			dev_err(&port->dev, "pl2303 driver does not support"
+				" the baudrate requested (fix it)\n");
 			break;
 	}
 	dbg("%s - baud = %d", __FUNCTION__, baud);
@@ -469,10 +475,10 @@ static void pl2303_set_termios (struct usb_serial_port *port, struct termios *ol
 		dbg("%s - parity = none", __FUNCTION__);
 	}
 
-	i = usb_control_msg (serial->dev, usb_sndctrlpipe (serial->dev, 0),
+	i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 			    SET_LINE_REQUEST, SET_LINE_REQUEST_TYPE,
 			    0, 0, buf, 7, 100);
-	dbg ("0x21:0x20:0:0  %d", i);
+	dbg("0x21:0x20:0:0  %d", i);
 
 	/* change control lines if we are switching to or from B0 */
 	spin_lock_irqsave(&priv->lock, flags);
@@ -491,10 +497,10 @@ static void pl2303_set_termios (struct usb_serial_port *port, struct termios *ol
 
 	buf[0] = buf[1] = buf[2] = buf[3] = buf[4] = buf[5] = buf[6] = 0;
 
-	i = usb_control_msg (serial->dev, usb_rcvctrlpipe (serial->dev, 0),
+	i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 			    GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
 			    0, 0, buf, 7, 100);
-	dbg ("0xa1:0x21:0:0  %d - %x %x %x %x %x %x %x", i,
+	dbg("0xa1:0x21:0:0  %d - %x %x %x %x %x %x %x", i,
 	     buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
 
 	if (cflag & CRTSCTS) {
@@ -508,13 +514,13 @@ static void pl2303_set_termios (struct usb_serial_port *port, struct termios *ol
 				    VENDOR_WRITE_REQUEST,
 				    VENDOR_WRITE_REQUEST_TYPE,
 				    0x0, index, NULL, 0, 100);
-		dbg ("0x40:0x1:0x0:0x%x  %d", index, i);
+		dbg("0x40:0x1:0x0:0x%x  %d", index, i);
 	}
 
-	kfree (buf);
+	kfree(buf);
 }
 
-static int pl2303_open (struct usb_serial_port *port, struct file *filp)
+static int pl2303_open(struct usb_serial_port *port, struct file *filp)
 {
 	struct termios tmp_termios;
 	struct usb_serial *serial = port->serial;
@@ -568,33 +574,34 @@ static int pl2303_open (struct usb_serial_port *port, struct file *filp)
 
 	/* Setup termios */
 	if (port->tty) {
-		pl2303_set_termios (port, &tmp_termios);
+		pl2303_set_termios(port, &tmp_termios);
 	}
 
 	//FIXME: need to assert RTS and DTR if CRTSCTS off
 
 	dbg("%s - submitting read urb", __FUNCTION__);
 	port->read_urb->dev = serial->dev;
-	result = usb_submit_urb (port->read_urb, GFP_KERNEL);
+	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (result) {
-		dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result);
-		pl2303_close (port, NULL);
+		dev_err(&port->dev, "%s - failed submitting read urb,"
+			" error %d\n", __FUNCTION__, result);
+		pl2303_close(port, NULL);
 		return -EPROTO;
 	}
 
 	dbg("%s - submitting interrupt urb", __FUNCTION__);
 	port->interrupt_in_urb->dev = serial->dev;
-	result = usb_submit_urb (port->interrupt_in_urb, GFP_KERNEL);
+	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 	if (result) {
-		dev_err(&port->dev, "%s - failed submitting interrupt urb, error %d\n", __FUNCTION__, result);
-		pl2303_close (port, NULL);
+		dev_err(&port->dev, "%s - failed submitting interrupt urb,"
+			" error %d\n", __FUNCTION__, result);
+		pl2303_close(port, NULL);
 		return -EPROTO;
 	}
 	return 0;
 }
 
-
-static void pl2303_close (struct usb_serial_port *port, struct file *filp)
+static void pl2303_close(struct usb_serial_port *port, struct file *filp)
 {
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
@@ -612,9 +619,9 @@ static void pl2303_close (struct usb_serial_port *port, struct file *filp)
 	add_wait_queue(&port->tty->write_wait, &wait);
 	for (;;) {
 		set_current_state(TASK_INTERRUPTIBLE);
-		if (pl2303_buf_data_avail(priv->buf) == 0
-		|| timeout == 0 || signal_pending(current)
-		|| !usb_get_intfdata(port->serial->interface))	/* disconnect */
+		if (pl2303_buf_data_avail(priv->buf) == 0 ||
+		    timeout == 0 || signal_pending(current) ||
+		    !usb_get_intfdata(port->serial->interface))	/* disconnect */
 			break;
 		spin_unlock_irqrestore(&priv->lock, flags);
 		timeout = schedule_timeout(timeout);
@@ -652,13 +659,13 @@ static void pl2303_close (struct usb_serial_port *port, struct file *filp)
 			/* drop DTR and RTS */
 			spin_lock_irqsave(&priv->lock, flags);
 			priv->line_control = 0;
-			spin_unlock_irqrestore (&priv->lock, flags);
-			set_control_lines (port->serial->dev, 0);
+			spin_unlock_irqrestore(&priv->lock, flags);
+			set_control_lines(port->serial->dev, 0);
 		}
 	}
 }
 
-static int pl2303_tiocmset (struct usb_serial_port *port, struct file *file,
+static int pl2303_tiocmset(struct usb_serial_port *port, struct file *file,
 			   unsigned int set, unsigned int clear)
 {
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
@@ -668,7 +675,7 @@ static int pl2303_tiocmset (struct usb_serial_port *port, struct file *file,
 	if (!usb_get_intfdata(port->serial->interface))
 		return -ENODEV;
 
-	spin_lock_irqsave (&priv->lock, flags);
+	spin_lock_irqsave(&priv->lock, flags);
 	if (set & TIOCM_RTS)
 		priv->line_control |= CONTROL_RTS;
 	if (set & TIOCM_DTR)
@@ -678,12 +685,12 @@ static int pl2303_tiocmset (struct usb_serial_port *port, struct file *file,
 	if (clear & TIOCM_DTR)
 		priv->line_control &= ~CONTROL_DTR;
 	control = priv->line_control;
-	spin_unlock_irqrestore (&priv->lock, flags);
+	spin_unlock_irqrestore(&priv->lock, flags);
 
-	return set_control_lines (port->serial->dev, control);
+	return set_control_lines(port->serial->dev, control);
 }
 
-static int pl2303_tiocmget (struct usb_serial_port *port, struct file *file)
+static int pl2303_tiocmget(struct usb_serial_port *port, struct file *file)
 {
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
@@ -696,10 +703,10 @@ static int pl2303_tiocmget (struct usb_serial_port *port, struct file *file)
 	if (!usb_get_intfdata(port->serial->interface))
 		return -ENODEV;
 
-	spin_lock_irqsave (&priv->lock, flags);
+	spin_lock_irqsave(&priv->lock, flags);
 	mcr = priv->line_control;
 	status = priv->line_status;
-	spin_unlock_irqrestore (&priv->lock, flags);
+	spin_unlock_irqrestore(&priv->lock, flags);
 
 	result = ((mcr & CONTROL_DTR)		? TIOCM_DTR : 0)
 		  | ((mcr & CONTROL_RTS)	? TIOCM_RTS : 0)
@@ -721,9 +728,9 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 	unsigned int status;
 	unsigned int changed;
 
-	spin_lock_irqsave (&priv->lock, flags);
+	spin_lock_irqsave(&priv->lock, flags);
 	prevstatus = priv->line_status;
-	spin_unlock_irqrestore (&priv->lock, flags);
+	spin_unlock_irqrestore(&priv->lock, flags);
 
 	while (1) {
 		interruptible_sleep_on(&priv->delta_msr_wait);
@@ -731,9 +738,9 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 		if (signal_pending(current))
 			return -ERESTARTSYS;
 
-		spin_lock_irqsave (&priv->lock, flags);
+		spin_lock_irqsave(&priv->lock, flags);
 		status = priv->line_status;
-		spin_unlock_irqrestore (&priv->lock, flags);
+		spin_unlock_irqrestore(&priv->lock, flags);
 
 		changed=prevstatus^status;
 
@@ -749,7 +756,8 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 	return 0;
 }
 
-static int pl2303_ioctl (struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg)
+static int pl2303_ioctl(struct usb_serial_port *port, struct file *file,
+			unsigned int cmd, unsigned long arg)
 {
 	dbg("%s (%d) cmd = 0x%04x", __FUNCTION__, port->number, cmd);
 
@@ -766,7 +774,7 @@ static int pl2303_ioctl (struct usb_serial_port *port, struct file *file, unsign
 	return -ENOIOCTLCMD;
 }
 
-static void pl2303_break_ctl (struct usb_serial_port *port, int break_state)
+static void pl2303_break_ctl(struct usb_serial_port *port, int break_state)
 {
 	struct usb_serial *serial = port->serial;
 	u16 state;
@@ -780,15 +788,14 @@ static void pl2303_break_ctl (struct usb_serial_port *port, int break_state)
 		state = BREAK_ON;
 	dbg("%s - turning break %s", __FUNCTION__, state==BREAK_OFF ? "off" : "on");
 
-	result = usb_control_msg (serial->dev, usb_sndctrlpipe (serial->dev, 0),
+	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 				 BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
 				 0, NULL, 0, 100);
 	if (result)
 		dbg("%s - error sending break = %d", __FUNCTION__, result);
 }
 
-
-static void pl2303_shutdown (struct usb_serial *serial)
+static void pl2303_shutdown(struct usb_serial *serial)
 {
 	int i;
 	struct pl2303_private *priv;
@@ -830,10 +837,10 @@ static void pl2303_update_line_status(struct usb_serial_port *port,
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->line_status = data[status_idx];
 	spin_unlock_irqrestore(&priv->lock, flags);
-	wake_up_interruptible (&priv->delta_msr_wait);
+	wake_up_interruptible(&priv->delta_msr_wait);
 }
 
-static void pl2303_read_int_callback (struct urb *urb, struct pt_regs *regs)
+static void pl2303_read_int_callback(struct urb *urb, struct pt_regs *regs)
 {
 	struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
 	unsigned char *data = urb->transfer_buffer;
@@ -850,25 +857,29 @@ static void pl2303_read_int_callback (struct urb *urb, struct pt_regs *regs)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
+		dbg("%s - urb shutting down with status: %d", __FUNCTION__,
+		    urb->status);
 		return;
 	default:
-		dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
+		dbg("%s - nonzero urb status received: %d", __FUNCTION__,
+		    urb->status);
 		goto exit;
 	}
 
-	usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, urb->transfer_buffer);
+	usb_serial_debug_data(debug, &port->dev, __FUNCTION__,
+			      urb->actual_length, urb->transfer_buffer);
+
 	pl2303_update_line_status(port, data, actual_length);
 
 exit:
-	status = usb_submit_urb (urb, GFP_ATOMIC);
+	status = usb_submit_urb(urb, GFP_ATOMIC);
 	if (status)
-		dev_err(&urb->dev->dev, "%s - usb_submit_urb failed with result %d\n",
+		dev_err(&urb->dev->dev,
+			"%s - usb_submit_urb failed with result %d\n",
 			__FUNCTION__, status);
 }
 
-
-static void pl2303_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
+static void pl2303_read_bulk_callback(struct urb *urb, struct pt_regs *regs)
 {
 	struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
@@ -889,20 +900,25 @@ static void pl2303_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
 			return;
 		}
 		if (urb->status == -EPROTO) {
-			/* PL2303 mysteriously fails with -EPROTO reschedule the read */
-			dbg("%s - caught -EPROTO, resubmitting the urb", __FUNCTION__);
+			/* PL2303 mysteriously fails with -EPROTO reschedule
+			 * the read */
+			dbg("%s - caught -EPROTO, resubmitting the urb",
+			    __FUNCTION__);
 			urb->status = 0;
 			urb->dev = port->serial->dev;
 			result = usb_submit_urb(urb, GFP_ATOMIC);
 			if (result)
-				dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
+				dev_err(&urb->dev->dev, "%s - failed"
+					" resubmitting read urb, error %d\n",
+					__FUNCTION__, result);
 			return;
 		}
 		dbg("%s - unable to handle the error, exiting.", __FUNCTION__);
 		return;
 	}
 
-	usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
+	usb_serial_debug_data(debug, &port->dev, __FUNCTION__,
+			      urb->actual_length, data);
 
 	/* get tty_flag from status */
 	tty_flag = TTY_NORMAL;
@@ -911,7 +927,7 @@ static void pl2303_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
 	status = priv->line_status;
 	priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
 	spin_unlock_irqrestore(&priv->lock, flags);
-	wake_up_interruptible (&priv->delta_msr_wait);
+	wake_up_interruptible(&priv->delta_msr_wait);
 
 	/* break takes precedence over parity, */
 	/* which takes precedence over framing errors */
@@ -930,8 +946,8 @@ static void pl2303_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
 		if (status & UART_OVERRUN_ERROR)
 			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
 		for (i = 0; i < urb->actual_length; ++i)
-			tty_insert_flip_char (tty, data[i], tty_flag);
-		tty_flip_buffer_push (tty);
+			tty_insert_flip_char(tty, data[i], tty_flag);
+		tty_flip_buffer_push(tty);
 	}
 
 	/* Schedule the next read _if_ we are still open */
@@ -939,15 +955,14 @@ static void pl2303_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
 		urb->dev = port->serial->dev;
 		result = usb_submit_urb(urb, GFP_ATOMIC);
 		if (result)
-			dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
+			dev_err(&urb->dev->dev, "%s - failed resubmitting"
+				" read urb, error %d\n", __FUNCTION__, result);
 	}
 
 	return;
 }
 
-
-
-static void pl2303_write_bulk_callback (struct urb *urb, struct pt_regs *regs)
+static void pl2303_write_bulk_callback(struct urb *urb, struct pt_regs *regs)
 {
 	struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
@@ -963,18 +978,21 @@ static void pl2303_write_bulk_callback (struct urb *urb, struct pt_regs *regs)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
+		dbg("%s - urb shutting down with status: %d", __FUNCTION__,
+		    urb->status);
 		priv->write_urb_in_use = 0;
 		return;
 	default:
 		/* error in the urb, so we have to resubmit it */
 		dbg("%s - Overflow in write", __FUNCTION__);
-		dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
+		dbg("%s - nonzero write bulk status received: %d", __FUNCTION__,
+		    urb->status);
 		port->write_urb->transfer_buffer_length = 1;
 		port->write_urb->dev = port->serial->dev;
-		result = usb_submit_urb (port->write_urb, GFP_ATOMIC);
+		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 		if (result)
-			dev_err(&urb->dev->dev, "%s - failed resubmitting write urb, error %d\n", __FUNCTION__, result);
+			dev_err(&urb->dev->dev, "%s - failed resubmitting write"
+				" urb, error %d\n", __FUNCTION__, result);
 		else
 			return;
 	}
@@ -985,19 +1003,15 @@ static void pl2303_write_bulk_callback (struct urb *urb, struct pt_regs *regs)
 	pl2303_send(port);
 }
 
-
 /*
  * pl2303_buf_alloc
  *
  * Allocate a circular buffer and all associated memory.
  */
-
 static struct pl2303_buf *pl2303_buf_alloc(unsigned int size)
 {
-
 	struct pl2303_buf *pb;
 
-
 	if (size == 0)
 		return NULL;
 
@@ -1015,16 +1029,13 @@ static struct pl2303_buf *pl2303_buf_alloc(unsigned int size)
 	pb->buf_get = pb->buf_put = pb->buf_buf;
 
 	return pb;
-
 }
 
-
 /*
  * pl2303_buf_free
  *
  * Free the buffer and all associated memory.
  */
-
 static void pl2303_buf_free(struct pl2303_buf *pb)
 {
 	if (pb) {
@@ -1033,13 +1044,11 @@ static void pl2303_buf_free(struct pl2303_buf *pb)
 	}
 }
 
-
 /*
  * pl2303_buf_clear
  *
  * Clear out all data in the circular buffer.
  */
-
 static void pl2303_buf_clear(struct pl2303_buf *pb)
 {
 	if (pb != NULL)
@@ -1047,14 +1056,12 @@ static void pl2303_buf_clear(struct pl2303_buf *pb)
 		/* equivalent to a get of all data available */
 }
 
-
 /*
  * pl2303_buf_data_avail
  *
  * Return the number of bytes of data available in the circular
  * buffer.
  */
-
 static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb)
 {
 	if (pb != NULL)
@@ -1063,14 +1070,12 @@ static unsigned int pl2303_buf_data_avail(struct pl2303_buf *pb)
 		return 0;
 }
 
-
 /*
  * pl2303_buf_space_avail
  *
  * Return the number of bytes of space available in the circular
  * buffer.
  */
-
 static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb)
 {
 	if (pb != NULL)
@@ -1079,7 +1084,6 @@ static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb)
 		return 0;
 }
 
-
 /*
  * pl2303_buf_put
  *
@@ -1088,14 +1092,11 @@ static unsigned int pl2303_buf_space_avail(struct pl2303_buf *pb)
  *
  * Return the number of bytes copied.
  */
-
 static unsigned int pl2303_buf_put(struct pl2303_buf *pb, const char *buf,
 				   unsigned int count)
 {
-
 	unsigned int len;
 
-
 	if (pb == NULL)
 		return 0;
 
@@ -1120,10 +1121,8 @@ static unsigned int pl2303_buf_put(struct pl2303_buf *pb, const char *buf,
 	}
 
 	return count;
-
 }
 
-
 /*
  * pl2303_buf_get
  *
@@ -1132,14 +1131,11 @@ static unsigned int pl2303_buf_put(struct pl2303_buf *pb, const char *buf,
  *
  * Return the number of bytes copied.
  */
-
 static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf,
 				   unsigned int count)
 {
-
 	unsigned int len;
 
-
 	if (pb == NULL)
 		return 0;
 
@@ -1164,12 +1160,12 @@ static unsigned int pl2303_buf_get(struct pl2303_buf *pb, char *buf,
 	}
 
 	return count;
-
 }
 
-static int __init pl2303_init (void)
+static int __init pl2303_init(void)
 {
 	int retval;
+
 	retval = usb_serial_register(&pl2303_device);
 	if (retval)
 		goto failed_usb_serial_register;
@@ -1184,14 +1180,12 @@ static int __init pl2303_init (void)
 	return retval;
 }
 
-
-static void __exit pl2303_exit (void)
+static void __exit pl2303_exit(void)
 {
-	usb_deregister (&pl2303_driver);
-	usb_serial_deregister (&pl2303_device);
+	usb_deregister(&pl2303_driver);
+	usb_serial_deregister(&pl2303_device);
 }
 
-
 module_init(pl2303_init);
 module_exit(pl2303_exit);