drm/ast: Cleanup analog init code path

Move the MMIO mangling to a separate routine and actually
disable the DVO output when using pure analog.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drivers/gpu/drm/ast/ast_dp501.c

@@ -379,11 +379,39 @@ static bool ast_init_dvo(struct drm_device *dev)
 	return true;
 }
 
+
+static void ast_init_analog(struct drm_device *dev)
+{
+	struct ast_private *ast = dev->dev_private;
+	u32 data;
+
+	/*
+	 * Set DAC source to VGA mode in SCU2C via the P2A
+	 * bridge. First configure the P2U to target the SCU
+	 * in case it isn't at this stage.
+	 */
+	ast_write32(ast, 0xf004, 0x1e6e0000);
+	ast_write32(ast, 0xf000, 0x1);
+
+	/* Then unlock the SCU with the magic password */
+	ast_write32(ast, 0x12000, 0x1688a8a8);
+	ast_write32(ast, 0x12000, 0x1688a8a8);
+	ast_write32(ast, 0x12000, 0x1688a8a8);
+
+	/* Finally, clear bits [17:16] of SCU2c */
+	data = ast_read32(ast, 0x1202c);
+	data &= 0xfffcffff;
+	ast_write32(ast, 0, data);
+
+	/* Disable DVO */
+	ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa3, 0xcf, 0x00);
+}
+
 void ast_init_3rdtx(struct drm_device *dev)
 {
 	struct ast_private *ast = dev->dev_private;
 	u8 jreg;
-	u32 data;
+
 	if (ast->chip == AST2300 || ast->chip == AST2400) {
 		jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, 0xff);
 		switch (jreg & 0x0e) {
@@ -399,23 +427,8 @@ void ast_init_3rdtx(struct drm_device *dev)
 		default:
 			if (ast->tx_chip_type == AST_TX_SIL164)
 				ast_init_dvo(dev);
-			else {
-				/*
-				 * Set DAC source to VGA mode in SCU2C via the P2A
-				 * bridge. First configure the P2U to target the SCU
-				 * in case it isn't at this stage.
-				 */
-				ast_write32(ast, 0xf004, 0x1e6e0000);
-				ast_write32(ast, 0xf000, 0x1);
-				/* Then unlock the SCU with the magic password */
-				ast_write32(ast, 0x12000, 0x1688a8a8);
-				ast_write32(ast, 0x12000, 0x1688a8a8);
-				ast_write32(ast, 0x12000, 0x1688a8a8);
-				/* Finally, clear bits [17:16] of SCU2c */
-				data = ast_read32(ast, 0x1202c);
-				data &= 0xfffcffff;
-				ast_write32(ast, 0, data);
-			}
+			else
+				ast_init_analog(dev);
 		}
 	}
 }