powerpc/fsl-booke: Handle L1 D-cache parity error correctly on e500mc

If the L1 D-Cache is in write shadow mode the HW will auto-recover the
error.  However we might still log the error and cause a machine check
(if L1CSR0[CPE] - Cache error checking enable).  We should only treat
the non-write shadow case as non-recoverable.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

arch/powerpc/include/asm/reg_booke.h

@@ -548,6 +548,9 @@
 #define L1CSR1_ICFI	0x00000002	/* Instr Cache Flash Invalidate */
 #define L1CSR1_ICE	0x00000001	/* Instr Cache Enable */
 
+/* Bit definitions for L1CSR2. */
+#define L1CSR2_DCWS	0x40000000	/* Data Cache write shadow */
+
 /* Bit definitions for L2CSR0. */
 #define L2CSR0_L2E	0x80000000	/* L2 Cache Enable */
 #define L2CSR0_L2PE	0x40000000	/* L2 Cache Parity/ECC Enable */

arch/powerpc/kernel/traps.c

@@ -457,6 +457,13 @@ int machine_check_e500mc(struct pt_regs *regs)
 
 	if (reason & MCSR_DCPERR_MC) {
 		printk("Data Cache Parity Error\n");
+
+		/*
+		 * In write shadow mode we auto-recover from the error, but it
+		 * may still get logged and cause a machine check.  We should
+		 * only treat the non-write shadow case as non-recoverable.
+		 */
+		if (!(mfspr(SPRN_L1CSR2) & L1CSR2_DCWS))
 			recoverable = 0;
 	}