Commit 383586b1 authored by Jean Delvare's avatar Jean Delvare Committed by Jean Delvare

hwmon: (f71882fg) Add support for the F81865F

Add support for the Fintek F81865F. It's essentially compatible with
the F71882FG, but has fewer inputs: 7 voltage, 2 temperature and 2 fan
inputs only.
Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
Acked-by: default avatarHans de Goede <hdegoede@redhat.com>
Acked-by: default avatarGuenter Roeck <guenter.roeck@ericsson.com>
parent 5d7f77bf
......@@ -41,6 +41,10 @@ Supported chips:
Note: This is the 64-pin variant of the F71889FG, they have the
same device ID and are fully compatible as far as hardware
monitoring is concerned.
* Fintek F81865F
Prefix: 'f81865f'
Addresses scanned: none, address read from Super I/O config space
Datasheet: Available from the Fintek website
Author: Hans de Goede <hdegoede@redhat.com>
......
......@@ -330,6 +330,7 @@ config SENSORS_F71882FG
F71889FG/ED
F8000
F81801U
F81865F
This driver can also be built as a module. If so, the module
will be called f71882fg.
......
......@@ -55,6 +55,7 @@
#define SIO_F71889_ID 0x0723 /* Chipset ID */
#define SIO_F71889E_ID 0x0909 /* Chipset ID */
#define SIO_F8000_ID 0x0581 /* Chipset ID */
#define SIO_F81865_ID 0x0704 /* Chipset ID */
#define REGION_LENGTH 8
#define ADDR_REG_OFFSET 5
......@@ -106,7 +107,7 @@ module_param(force_id, ushort, 0);
MODULE_PARM_DESC(force_id, "Override the detected device ID");
enum chips { f71808e, f71858fg, f71862fg, f71869, f71882fg, f71889fg,
f71889ed, f8000 };
f71889ed, f8000, f81865f };
static const char *f71882fg_names[] = {
"f71808e",
......@@ -117,6 +118,7 @@ static const char *f71882fg_names[] = {
"f71889fg", /* f81801u too, same id */
"f71889ed",
"f8000",
"f81865f",
};
static const char f71882fg_has_in[][F71882FG_MAX_INS] = {
......@@ -128,6 +130,7 @@ static const char f71882fg_has_in[][F71882FG_MAX_INS] = {
[f71889fg] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
[f71889ed] = { 1, 1, 1, 1, 1, 1, 1, 1, 1 },
[f8000] = { 1, 1, 1, 0, 0, 0, 0, 0, 0 },
[f81865f] = { 1, 1, 1, 1, 1, 1, 1, 0, 0 },
};
static const char f71882fg_has_in1_alarm[] = {
......@@ -139,6 +142,7 @@ static const char f71882fg_has_in1_alarm[] = {
[f71889fg] = 1,
[f71889ed] = 1,
[f8000] = 0,
[f81865f] = 1,
};
static const char f71882fg_has_beep[] = {
......@@ -150,6 +154,7 @@ static const char f71882fg_has_beep[] = {
[f71889fg] = 1,
[f71889ed] = 1,
[f8000] = 0,
[f81865f] = 1,
};
static const char f71882fg_nr_fans[] = {
......@@ -161,6 +166,7 @@ static const char f71882fg_nr_fans[] = {
[f71889fg] = 3,
[f71889ed] = 3,
[f8000] = 3,
[f81865f] = 2,
};
static const char f71882fg_nr_temps[] = {
......@@ -172,6 +178,7 @@ static const char f71882fg_nr_temps[] = {
[f71889fg] = 3,
[f71889ed] = 3,
[f8000] = 3,
[f81865f] = 2,
};
static struct platform_device *f71882fg_pdev;
......@@ -2186,16 +2193,12 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
case f71862fg:
err = (data->pwm_enable & 0x15) != 0x15;
break;
case f71808e:
case f71869:
case f71882fg:
case f71889fg:
case f71889ed:
err = 0;
break;
case f8000:
err = data->pwm_enable & 0x20;
break;
default:
err = 0;
break;
}
if (err) {
dev_err(&pdev->dev,
......@@ -2433,6 +2436,9 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
case SIO_F8000_ID:
sio_data->type = f8000;
break;
case SIO_F81865_ID:
sio_data->type = f81865f;
break;
default:
pr_info("Unsupported Fintek device: %04x\n",
(unsigned int)devid);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment