USB: remove staging quatech_usb2 driver

Now that we have a "real" driver for the quatech devices, we can remove
the drivers/staging/quatech_usb2/ driver as it is no longer needed.

Thanks to Bill Pemberton for writing the new driver.

Cc: Richard Ash <richard@audacityteam.org>
Cc: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/Kconfig

@@ -68,8 +68,6 @@ source "drivers/staging/octeon/Kconfig"
 
 source "drivers/staging/serqt_usb2/Kconfig"
 
-source "drivers/staging/quatech_usb2/Kconfig"
-
 source "drivers/staging/vt6655/Kconfig"
 
 source "drivers/staging/vt6656/Kconfig"

drivers/staging/Makefile

@@ -25,7 +25,6 @@ obj-$(CONFIG_TRANZPORT)		+= frontier/
 obj-$(CONFIG_IDE_PHISON)	+= phison/
 obj-$(CONFIG_LINE6_USB)		+= line6/
 obj-$(CONFIG_USB_SERIAL_QUATECH2)	+= serqt_usb2/
-obj-$(CONFIG_USB_SERIAL_QUATECH_USB2)	+= quatech_usb2/
 obj-$(CONFIG_OCTEON_ETHERNET)	+= octeon/
 obj-$(CONFIG_VT6655)		+= vt6655/
 obj-$(CONFIG_VT6656)		+= vt6656/

drivers/staging/quatech_usb2/Kconfig

-config USB_SERIAL_QUATECH_USB2
-	tristate "USB Quatech xSU2-[14]00 USB Serial Driver"
-	depends on USB_SERIAL
-	help
-	  Say Y here if you want to use a Quatech USB2.0 to serial adaptor. This
-	  driver supports the SSU2-100, DSU2-100, DSU2-400, QSU2-100, QSU2-400,
-	  ESU2-400 and ESU2-100 USB2.0 to RS232 / 485 / 422 serial adaptors.
-
-	  Some hardware has an incorrect product string and announces itself as
-	  ESU-100 (which uses the serqt driver) even though it is an ESU2-100.
-	  Check the label on the bottom of your device.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called quatech_usb2 .
-

drivers/staging/quatech_usb2/Makefile

-obj-$(CONFIG_USB_SERIAL_QUATECH_USB2)		+= quatech_usb2.o

drivers/staging/quatech_usb2/TODO

-Incomplete list of things that this driver does not yet implement completely or
-at all. some of these may not be possible to implement because the hardware
-support does not exist. Others may be possible, but the magic control codes to
-make them happen are unknown, and some may just need the driver support to
-implement them writing.
-
-* Mark/Space parity is not implemented (reported back correctly)
-* IXANY flow control mode is not implemented (flag ignored completely)