Merge tag 'backlight-next-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight

Pull backlight updates from Lee Jones:
 "New Functionality:
   - Add support for an enable GPIO; lm3630a_bl
   - Add support for short circuit handling; qcom-wled
   - Add support for automatic string detection; qcom-wled

  Fix-ups:
   - Update Device Tree bindings; lm3630a-backlight, led-backlight,
     qcom-wled
   - Constify; ipaq_micro_bl
   - Optimise for CPU cycles; pwm_bl
   - Coding style fix-ups; pwm_bl
   - Trivial fix-ups (white space, comments, renaming); pwm_bl,
     gpio_backlight, qcom-wled
   - Kconfig dependency hacking; LCD_HP700
   - Rename, refactor and add peripherals; pm8941-wled => qcom-wled
   - Make use of GPIO look-up tables; tosa_bl, tosa_lcd
   - Remove superfluous code; gpio_backlight
   - Adapt GPIO direction handling; gpio_backlight
   - Remove legacy use of platform data; gpio_backlight

  Bug Fixes:
   - Provide modules aliases; lm3630a_bl"

* tag 'backlight-next-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (32 commits)
  backlight: qcom-wled: Fix spelling mistake "trigged" -> "triggered"
  backlight: gpio: Pull gpio_backlight_initial_power_state() into probe
  backlight: gpio: Use a helper variable for &pdev->dev
  backlight: gpio: Remove unused fields from platform data
  sh: ecovec24: don't set unused fields in platform data
  backlight: gpio: Simplify the platform data handling
  sh: ecovec24: add additional properties to the backlight device
  backlight: gpio: Explicitly set the direction of the GPIO
  backlight: gpio: Remove stray newline
  backlight: gpio: Remove unneeded include
  video: backlight: tosa: Use GPIO lookup table
  backlight: qcom-wled: Add auto string detection logic
  backlight: qcom-wled: Add support for short circuit handling
  backlight: qcom-wled: Add support for WLED4 peripheral
  backlight: qcom-wled: Restructure the driver for WLED3
  backlight: qcom-wled: Rename PM8941* to WLED3
  backlight: qcom-wled: Add new properties for PMI8998
  backlight: qcom-wled: Restructure the qcom-wled bindings
  backlight: qcom-wled: Rename pm8941-wled.c to qcom-wled.c
  dt-bindings: backlight: lm3630a: Fix missing include
  ...

Documentation/devicetree/bindings/leds/backlight/led-backlight.txt

+led-backlight bindings
+
+This binding is used to describe a basic backlight device made of LEDs.
+It can also be used to describe a backlight device controlled by the output of
+a LED driver.
+
+Required properties:
+  - compatible: "led-backlight"
+  - leds: a list of LEDs
+
+Optional properties:
+  - brightness-levels: Array of distinct brightness levels. The levels must be
+                       in the range accepted by the underlying LED devices.
+                       This is used to translate a backlight brightness level
+                       into a LED brightness level. If it is not provided, the
+                       identity mapping is used.
+
+  - default-brightness-level: The default brightness level.
+
+Example:
+
+	backlight {
+		compatible = "led-backlight";
+
+		leds = <&led1>, <&led2>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};

Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml

@@ -29,6 +29,10 @@ properties:
   '#size-cells':
     const: 0
 
+  enable-gpios:
+    description: GPIO to use to enable/disable the backlight (HWEN pin).
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -89,6 +93,7 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
@@ -96,6 +101,7 @@ examples:
         led-controller@38 {
                 compatible = "ti,lm3630a";
                 reg = <0x38>;
+                enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
 
                 #address-cells = <1>;
                 #size-cells = <0>;

Documentation/devicetree/bindings/leds/backlight/pm8941-wled.txt

-Binding for Qualcomm PM8941 WLED driver
-
-Required properties:
-- compatible: should be "qcom,pm8941-wled"
-- reg: slave address
-
-Optional properties:
-- default-brightness: brightness value on boot, value from: 0-4095
-	default: 2048
-- label: The name of the backlight device
-- qcom,cs-out: bool; enable current sink output
-- qcom,cabc: bool; enable content adaptive backlight control
-- qcom,ext-gen: bool; use externally generated modulator signal to dim
-- qcom,current-limit: mA; per-string current limit; value from 0 to 25
-	default: 20mA
-- qcom,current-boost-limit: mA; boost current limit; one of:
-	105, 385, 525, 805, 980, 1260, 1400, 1680
-	default: 805mA
-- qcom,switching-freq: kHz; switching frequency; one of:
-	600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371,
-	1600, 1920, 2400, 3200, 4800, 9600,
-	default: 1600kHz
-- qcom,ovp: V; Over-voltage protection limit; one of:
-	27, 29, 32, 35
-	default: 29V
-- qcom,num-strings: #; number of led strings attached; value from 1 to 3
-	default: 2
-
-Example:
-
-pm8941-wled@d800 {
-	compatible = "qcom,pm8941-wled";
-	reg = <0xd800>;
-	label = "backlight";
-
-	qcom,cs-out;
-	qcom,current-limit = <20>;
-	qcom,current-boost-limit = <805>;
-	qcom,switching-freq = <1600>;
-	qcom,ovp = <29>;
-	qcom,num-strings = <2>;
-};

Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt

+Binding for Qualcomm Technologies, Inc. WLED driver
+
+WLED (White Light Emitting Diode) driver is used for controlling display
+backlight that is part of PMIC on Qualcomm Technologies, Inc. reference
+platforms. The PMIC is connected to the host processor via SPMI bus.
+
+- compatible
+	Usage:        required
+	Value type:   <string>
+	Definition:   should be one of:
+			"qcom,pm8941-wled"
+			"qcom,pmi8998-wled"
+			"qcom,pm660l-wled"
+
+- reg
+	Usage:        required
+	Value type:   <prop encoded array>
+	Definition:   Base address of the WLED modules.
+
+- default-brightness
+	Usage:        optional
+	Value type:   <u32>
+	Definition:   brightness value on boot, value from: 0-4095.
+		      Default: 2048
+
+- label
+	Usage:        required
+	Value type:   <string>
+	Definition:   The name of the backlight device
+
+- qcom,cs-out
+	Usage:        optional
+	Value type:   <bool>
+	Definition:   enable current sink output.
+		      This property is supported only for PM8941.
+
+- qcom,cabc
+	Usage:        optional
+	Value type:   <bool>
+	Definition:   enable content adaptive backlight control.
+
+- qcom,ext-gen
+	Usage:        optional
+	Value type:   <bool>
+	Definition:   use externally generated modulator signal to dim.
+		      This property is supported only for PM8941.
+
+- qcom,current-limit
+	Usage:        optional
+	Value type:   <u32>
+	Definition:   mA; per-string current limit; value from 0 to 25 with
+		      1 mA step. Default 20 mA.
+		      This property is supported only for pm8941.
+
+- qcom,current-limit-microamp
+	Usage:        optional
+	Value type:   <u32>
+	Definition:   uA; per-string current limit; value from 0 to 30000 with
+		      2500 uA step. Default 25 mA.
+
+- qcom,current-boost-limit
+	Usage:        optional
+	Value type:   <u32>
+	Definition:   mA; boost current limit.
+		      For pm8941: one of: 105, 385, 525, 805, 980, 1260, 1400,
+		      1680. Default: 805 mA.
+		      For pmi8998: one of: 105, 280, 450, 620, 970, 1150, 1300,
+		      1500. Default: 970 mA.
+
+- qcom,switching-freq
+	Usage:        optional
+	Value type:   <u32>
+	 Definition:   kHz; switching frequency; one of: 600, 640, 685, 738,
+		       800, 872, 960, 1066, 1200, 1371, 1600, 1920, 2400, 3200,
+		       4800, 9600.
+		       Default: for pm8941: 1600 kHz
+				for pmi8998: 800 kHz
+
+- qcom,ovp
+	Usage:        optional
+	Value type:   <u32>
+	Definition:   V; Over-voltage protection limit; one of:
+		      27, 29, 32, 35. Default: 29V
+		      This property is supported only for PM8941.
+
+- qcom,ovp-millivolt
+	Usage:        optional
+	Value type:   <u32>
+	Definition:   mV; Over-voltage protection limit;
+		      For pmi8998: one of 18100, 19600, 29600, 31100.
+		      Default 29600 mV.
+		      If this property is not specified for PM8941, it
+		      falls back to "qcom,ovp" property.
+
+- qcom,num-strings
+	Usage:        optional
+	Value type:   <u32>
+	Definition:   #; number of led strings attached;
+		      value: For PM8941 from 1 to 3. Default: 2
+			     For PMI8998 from 1 to 4.
+
+- interrupts
+	Usage:        optional
+	Value type:   <prop encoded array>
+	Definition:   Interrupts associated with WLED. This should be
+		      "short" and "ovp" interrupts. Interrupts can be
+		      specified as per the encoding listed under
+		      Documentation/devicetree/bindings/spmi/
+		      qcom,spmi-pmic-arb.txt.
+
+- interrupt-names
+	Usage:        optional
+	Value type:   <string>
+	Definition:   Interrupt names associated with the interrupts.
+		      Must be "short" and "ovp". The short circuit detection
+		      is not supported for PM8941.
+
+- qcom,enabled-strings
+	Usage:        optional
+	Value tyoe:   <u32 array>
+	Definition:   Array of the WLED strings numbered from 0 to 3. Each
+		      string of leds are operated individually. Specify the
+		      list of strings used by the device. Any combination of
+		      led strings can be used.
+
+- qcom,external-pfet
+	Usage:        optional
+	Value type:   <bool>
+	Definition:   Specify if external PFET control for short circuit
+		      protection is used. This property is supported only
+		      for PMI8998.
+
+- qcom,auto-string-detection
+	Usage:        optional
+	Value type:   <bool>
+	Definition:   Enables auto-detection of the WLED string configuration.
+		      This feature is not supported for PM8941.
+
+
+Example:
+
+pm8941-wled@d800 {
+	compatible = "qcom,pm8941-wled";
+	reg = <0xd800>;
+	label = "backlight";
+
+	qcom,cs-out;
+	qcom,current-limit = <20>;
+	qcom,current-boost-limit = <805>;
+	qcom,switching-freq = <1600>;
+	qcom,ovp = <29>;
+	qcom,num-strings = <2>;
+	qcom,enabled-strings = <0 1>;
+};

arch/arm/mach-pxa/include/mach/tosa.h

@@ -72,18 +72,6 @@
 #define TOSA_GPIO_BAT0_TH_ON		(TOSA_TC6393XB_GPIO_BASE + 14)
 #define TOSA_GPIO_BAT1_TH_ON		(TOSA_TC6393XB_GPIO_BASE + 15)
 
-/*
- * Timing Generator
- */
-#define TG_PNLCTL 			0x00
-#define TG_TPOSCTL 			0x01
-#define TG_DUTYCTL 			0x02
-#define TG_GPOSR 			0x03
-#define TG_GPODR1 			0x04
-#define TG_GPODR2 			0x05
-#define TG_PINICTL 			0x06
-#define TG_HPOSCTL 			0x07
-
 /*
  * PXA GPIOs
  */
@@ -192,7 +180,4 @@
 #define TOSA_KEY_MAIL		KEY_MAIL
 #endif
 
-struct spi_device;
-extern int tosa_bl_enable(struct spi_device *spi, int enable);
-
 #endif /* _ASM_ARCH_TOSA_H_ */

arch/arm/mach-pxa/tosa.c

@@ -813,6 +813,26 @@ static struct pxa2xx_spi_controller pxa_ssp_master_info = {
 	.num_chipselect	= 1,
 };
 
+static struct gpiod_lookup_table tosa_lcd_gpio_table = {
+	.dev_id = "spi2.0",
+	.table = {
+		GPIO_LOOKUP("tc6393xb",
+			    TOSA_GPIO_TG_ON - TOSA_TC6393XB_GPIO_BASE,
+			    "tg #pwr", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table tosa_lcd_bl_gpio_table = {
+	.dev_id = "i2c-tosa-bl",
+	.table = {
+		GPIO_LOOKUP("tc6393xb",
+			    TOSA_GPIO_BL_C20MA - TOSA_TC6393XB_GPIO_BASE,
+			    "backlight", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct spi_board_info spi_board_info[] __initdata = {
 	{
 		.modalias	= "tosa-lcd",
@@ -923,6 +943,8 @@ static void __init tosa_init(void)
 	platform_scoop_config = &tosa_pcmcia_config;
 
 	pxa2xx_set_spi_info(2, &pxa_ssp_master_info);
+	gpiod_add_lookup_table(&tosa_lcd_gpio_table);
+	gpiod_add_lookup_table(&tosa_lcd_bl_gpio_table);
 	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 
 	clk_add_alias("CLK_CK3P6MI", tc6393xb_device.name, "GPIO11_CLK", NULL);

arch/sh/boards/mach-ecovec24/setup.c

@@ -371,20 +371,32 @@ static struct platform_device lcdc_device = {
 	},
 };
 
+static struct gpiod_lookup_table gpio_backlight_lookup = {
+	.dev_id		= "gpio-backlight.0",
+	.table = {
+		GPIO_LOOKUP("sh7724_pfc", GPIO_PTR1, NULL, GPIO_ACTIVE_HIGH),
+		{ }
+	},
+};
+
+static struct property_entry gpio_backlight_props[] = {
+	PROPERTY_ENTRY_BOOL("default-on"),
+	{ }
+};
+
 static struct gpio_backlight_platform_data gpio_backlight_data = {
 	.fbdev = &lcdc_device.dev,
-	.gpio = GPIO_PTR1,
-	.def_value = 1,
-	.name = "backlight",
 };
 
-static struct platform_device gpio_backlight_device = {
+static const struct platform_device_info gpio_backlight_device_info = {
 	.name = "gpio-backlight",
-	.dev = {
-		.platform_data = &gpio_backlight_data,
-	},
+	.data = &gpio_backlight_data,
+	.size_data = sizeof(gpio_backlight_data),
+	.properties = gpio_backlight_props,
 };
 
+static struct platform_device *gpio_backlight_device;
+
 /* CEU0 */
 static struct ceu_platform_data ceu0_pdata = {
 	.num_subdevs			= 2,
@@ -1006,7 +1018,6 @@ static struct platform_device *ecovec_devices[] __initdata = {
 	&usb1_common_device,
 	&usbhs_device,
 	&lcdc_device,
-	&gpio_backlight_device,
 	&keysc_device,
 	&cn12_power,
 #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
@@ -1462,6 +1473,12 @@ static int __init arch_setup(void)
 #endif
 #endif
 
+	gpiod_add_lookup_table(&gpio_backlight_lookup);
+	gpio_backlight_device = platform_device_register_full(
+					&gpio_backlight_device_info);
+	if (IS_ERR(gpio_backlight_device))
+		return PTR_ERR(gpio_backlight_device);
+
 	return platform_add_devices(ecovec_devices,
 				    ARRAY_SIZE(ecovec_devices));
 }

drivers/video/backlight/Kconfig

@@ -99,7 +99,7 @@ config LCD_TOSA
 
 config LCD_HP700
 	tristate "HP Jornada 700 series LCD Driver"
-	depends on SA1100_JORNADA720_SSP && !PREEMPT
+	depends on SA1100_JORNADA720_SSP && !PREEMPTION
 	default y
 	help
 	  If you have an HP Jornada 700 series handheld (710/720/728)
@@ -228,7 +228,7 @@ config BACKLIGHT_HP680
 
 config BACKLIGHT_HP700
 	tristate "HP Jornada 700 series Backlight Driver"
-	depends on SA1100_JORNADA720_SSP && !PREEMPT
+	depends on SA1100_JORNADA720_SSP && !PREEMPTION
 	default y
 	help
 	  If you have an HP Jornada 700 series,
@@ -282,12 +282,12 @@ config BACKLIGHT_TOSA
 	  If you have an Sharp SL-6000 Zaurus say Y to enable a driver
 	  for its backlight
 
-config BACKLIGHT_PM8941_WLED
-	tristate "Qualcomm PM8941 WLED Driver"
+config BACKLIGHT_QCOM_WLED
+	tristate "Qualcomm PMIC WLED Driver"
 	select REGMAP
 	help
-	  If you have the Qualcomm PM8941, say Y to enable a driver for the
-	  WLED block.
+	  If you have the Qualcomm PMIC, say Y to enable a driver for the
+	  WLED block. Currently it supports PM8941 and PMI8998.
 
 config BACKLIGHT_SAHARA
 	tristate "Tabletkiosk Sahara Touch-iT Backlight Driver"

drivers/video/backlight/Makefile

@@ -48,8 +48,8 @@ obj-$(CONFIG_BACKLIGHT_OMAP1)		+= omap1_bl.o
 obj-$(CONFIG_BACKLIGHT_OT200)		+= ot200_bl.o
 obj-$(CONFIG_BACKLIGHT_PANDORA)		+= pandora_bl.o
 obj-$(CONFIG_BACKLIGHT_PCF50633)	+= pcf50633-backlight.o
-obj-$(CONFIG_BACKLIGHT_PM8941_WLED)	+= pm8941-wled.o
 obj-$(CONFIG_BACKLIGHT_PWM)		+= pwm_bl.o
+obj-$(CONFIG_BACKLIGHT_QCOM_WLED)	+= qcom-wled.o
 obj-$(CONFIG_BACKLIGHT_SAHARA)		+= kb3886_bl.o
 obj-$(CONFIG_BACKLIGHT_SKY81452)	+= sky81452-backlight.o
 obj-$(CONFIG_BACKLIGHT_TOSA)		+= tosa_bl.o

drivers/video/backlight/gpio_backlight.c

@@ -6,29 +6,23 @@
 #include <linux/backlight.h>
 #include <linux/err.h>
 #include <linux/fb.h>
-#include <linux/gpio.h> /* Only for legacy support */
 #include <linux/gpio/consumer.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 #include <linux/platform_data/gpio_backlight.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
 #include <linux/slab.h>
 
 struct gpio_backlight {
-	struct device *dev;
 	struct device *fbdev;
-
 	struct gpio_desc *gpiod;
-	int def_value;
 };
 
-static int gpio_backlight_update_status(struct backlight_device *bl)
+static int gpio_backlight_get_next_brightness(struct backlight_device *bl)
 {
-	struct gpio_backlight *gbl = bl_get_data(bl);
 	int brightness = bl->props.brightness;
 
 	if (bl->props.power != FB_BLANK_UNBLANK ||
@@ -36,6 +30,14 @@ static int gpio_backlight_update_status(struct backlight_device *bl)
 	    bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK))
 		brightness = 0;
 
+	return brightness;
+}
+
+static int gpio_backlight_update_status(struct backlight_device *bl)
+{
+	struct gpio_backlight *gbl = bl_get_data(bl);
+	int brightness = gpio_backlight_get_next_brightness(bl);
+
 	gpiod_set_value_cansleep(gbl->gpiod, brightness);
 
 	return 0;
@@ -55,105 +57,63 @@ static const struct backlight_ops gpio_backlight_ops = {
 	.check_fb	= gpio_backlight_check_fb,
 };
 
-static int gpio_backlight_probe_dt(struct platform_device *pdev,
-				   struct gpio_backlight *gbl)
-{
-	struct device *dev = &pdev->dev;
-	int ret;
-
-	gbl->def_value = device_property_read_bool(dev, "default-on");
-
-	gbl->gpiod = devm_gpiod_get(dev, NULL, GPIOD_ASIS);
-	if (IS_ERR(gbl->gpiod)) {
-		ret = PTR_ERR(gbl->gpiod);
-
-		if (ret != -EPROBE_DEFER) {
-			dev_err(dev,
-				"Error: The gpios parameter is missing or invalid.\n");
-		}
-		return ret;
-	}
-
-	return 0;
-}
-
-static int gpio_backlight_initial_power_state(struct gpio_backlight *gbl)
-{
-	struct device_node *node = gbl->dev->of_node;
-
-	/* Not booted with device tree or no phandle link to the node */
-	if (!node || !node->phandle)
-		return gbl->def_value ? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN;
-
-	/* if the enable GPIO is disabled, do not enable the backlight */
-	if (gpiod_get_value_cansleep(gbl->gpiod) == 0)
-		return FB_BLANK_POWERDOWN;
-
-	return FB_BLANK_UNBLANK;
-}
-
-
 static int gpio_backlight_probe(struct platform_device *pdev)
 {
-	struct gpio_backlight_platform_data *pdata =
-		dev_get_platdata(&pdev->dev);
+	struct device *dev = &pdev->dev;
+	struct gpio_backlight_platform_data *pdata = dev_get_platdata(dev);
+	struct device_node *of_node = dev->of_node;
 	struct backlight_properties props;
 	struct backlight_device *bl;
 	struct gpio_backlight *gbl;
-	int ret;
+	int ret, init_brightness, def_value;
 
-	gbl = devm_kzalloc(&pdev->dev, sizeof(*gbl), GFP_KERNEL);
+	gbl = devm_kzalloc(dev, sizeof(*gbl), GFP_KERNEL);
 	if (gbl == NULL)
 		return -ENOMEM;
 
-	gbl->dev = &pdev->dev;
+	if (pdata)
+		gbl->fbdev = pdata->fbdev;
 
-	if (pdev->dev.fwnode) {
-		ret = gpio_backlight_probe_dt(pdev, gbl);
-		if (ret)
-			return ret;
-	} else if (pdata) {
-		/*
-		 * Legacy platform data GPIO retrieveal. Do not expand
-		 * the use of this code path, currently only used by one
-		 * SH board.
-		 */
-		unsigned long flags = GPIOF_DIR_OUT;
+	def_value = device_property_read_bool(dev, "default-on");
 
-		gbl->fbdev = pdata->fbdev;
-		gbl->def_value = pdata->def_value;
-		flags |= gbl->def_value ? GPIOF_INIT_HIGH : GPIOF_INIT_LOW;
-
-		ret = devm_gpio_request_one(gbl->dev, pdata->gpio, flags,
-					    pdata ? pdata->name : "backlight");
-		if (ret < 0) {
-			dev_err(&pdev->dev, "unable to request GPIO\n");
-			return ret;
-		}
-		gbl->gpiod = gpio_to_desc(pdata->gpio);
-		if (!gbl->gpiod)
-			return -EINVAL;
-	} else {
-		dev_err(&pdev->dev,
-			"failed to find platform data or device tree node.\n");
-		return -ENODEV;
+	gbl->gpiod = devm_gpiod_get(dev, NULL, GPIOD_ASIS);
+	if (IS_ERR(gbl->gpiod)) {
+		ret = PTR_ERR(gbl->gpiod);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev,
+				"Error: The gpios parameter is missing or invalid.\n");
+		return ret;
 	}
 
 	memset(&props, 0, sizeof(props));
 	props.type = BACKLIGHT_RAW;
 	props.max_brightness = 1;
-	bl = devm_backlight_device_register(&pdev->dev, dev_name(&pdev->dev),
-					&pdev->dev, gbl, &gpio_backlight_ops,
-					&props);
+	bl = devm_backlight_device_register(dev, dev_name(dev), dev, gbl,
+					    &gpio_backlight_ops, &props);
 	if (IS_ERR(bl)) {
-		dev_err(&pdev->dev, "failed to register backlight\n");
+		dev_err(dev, "failed to register backlight\n");
 		return PTR_ERR(bl);
 	}
 
-	bl->props.power = gpio_backlight_initial_power_state(gbl);
+	/* Set the initial power state */
+	if (!of_node || !of_node->phandle)
+		/* Not booted with device tree or no phandle link to the node */
+		bl->props.power = def_value ? FB_BLANK_UNBLANK
+					    : FB_BLANK_POWERDOWN;
+	else if (gpiod_get_direction(gbl->gpiod) == 0 &&
+		 gpiod_get_value_cansleep(gbl->gpiod) == 0)
+		bl->props.power = FB_BLANK_POWERDOWN;
+	else
+		bl->props.power = FB_BLANK_UNBLANK;
+
 	bl->props.brightness = 1;
 
-	backlight_update_status(bl);
+	init_brightness = gpio_backlight_get_next_brightness(bl);
+	ret = gpiod_direction_output(gbl->gpiod, init_brightness);
+	if (ret) {
+		dev_err(dev, "failed to set initial brightness\n");
+		return ret;
+	}
 
 	platform_set_drvdata(pdev, bl);
 	return 0;

drivers/video/backlight/ipaq_micro_bl.c

@@ -44,7 +44,7 @@ static const struct backlight_ops micro_bl_ops = {
 	.update_status  = micro_bl_update_status,
 };
 
-static struct backlight_properties micro_bl_props = {
+static const struct backlight_properties micro_bl_props = {
 	.type = BACKLIGHT_RAW,
 	.max_brightness = 255,
 	.power = FB_BLANK_UNBLANK,

drivers/video/backlight/lm3630a_bl.c

@@ -12,6 +12,7 @@
 #include <linux/uaccess.h>
 #include <linux/interrupt.h>
 #include <linux/regmap.h>
+#include <linux/gpio/consumer.h>
 #include <linux/pwm.h>
 #include <linux/platform_data/lm3630a_bl.h>
 
@@ -48,6 +49,7 @@ struct lm3630a_chip {
 	struct lm3630a_platform_data *pdata;
 	struct backlight_device *bleda;
 	struct backlight_device *bledb;
+	struct gpio_desc *enable_gpio;
 	struct regmap *regmap;
 	struct pwm_device *pwmd;
 };
@@ -534,6 +536,13 @@ static int lm3630a_probe(struct i2c_client *client,
 	}
 	pchip->pdata = pdata;
 
+	pchip->enable_gpio = devm_gpiod_get_optional(&client->dev, "enable",
+						GPIOD_OUT_HIGH);
+	if (IS_ERR(pchip->enable_gpio)) {
+		rval = PTR_ERR(pchip->enable_gpio);
+		return rval;
+	}
+
 	/* chip initialize */
 	rval = lm3630a_chip_init(pchip);
 	if (rval < 0) {
@@ -598,12 +607,14 @@ static const struct i2c_device_id lm3630a_id[] = {
 	{}
 };
 
+MODULE_DEVICE_TABLE(i2c, lm3630a_id);
+
 static const struct of_device_id lm3630a_match_table[] = {
 	{ .compatible = "ti,lm3630a", },
 	{ },
 };
 
-MODULE_DEVICE_TABLE(i2c, lm3630a_id);
+MODULE_DEVICE_TABLE(of, lm3630a_match_table);
 
 static struct i2c_driver lm3630a_i2c_driver = {
 	.driver = {

drivers/video/backlight/pm8941-wled.c

-// SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) 2015, Sony Mobile Communications, AB.
- */
-
-#include <linux/kernel.h>
-#include <linux/backlight.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/regmap.h>
-
-/* From DT binding */
-#define PM8941_WLED_DEFAULT_BRIGHTNESS		2048
-
-#define PM8941_WLED_REG_VAL_BASE		0x40
-#define  PM8941_WLED_REG_VAL_MAX		0xFFF
-
-#define PM8941_WLED_REG_MOD_EN			0x46
-#define  PM8941_WLED_REG_MOD_EN_BIT		BIT(7)
-#define  PM8941_WLED_REG_MOD_EN_MASK		BIT(7)
-
-#define PM8941_WLED_REG_SYNC			0x47
-#define  PM8941_WLED_REG_SYNC_MASK		0x07
-#define  PM8941_WLED_REG_SYNC_LED1		BIT(0)
-#define  PM8941_WLED_REG_SYNC_LED2		BIT(1)
-#define  PM8941_WLED_REG_SYNC_LED3		BIT(2)
-#define  PM8941_WLED_REG_SYNC_ALL		0x07
-#define  PM8941_WLED_REG_SYNC_CLEAR		0x00
-
-#define PM8941_WLED_REG_FREQ			0x4c
-#define  PM8941_WLED_REG_FREQ_MASK		0x0f
-
-#define PM8941_WLED_REG_OVP			0x4d
-#define  PM8941_WLED_REG_OVP_MASK		0x03
-
-#define PM8941_WLED_REG_BOOST			0x4e
-#define  PM8941_WLED_REG_BOOST_MASK		0x07
-
-#define PM8941_WLED_REG_SINK			0x4f
-#define  PM8941_WLED_REG_SINK_MASK		0xe0
-#define  PM8941_WLED_REG_SINK_SHFT		0x05
-
-/* Per-'string' registers below */
-#define PM8941_WLED_REG_STR_OFFSET		0x10
-
-#define PM8941_WLED_REG_STR_MOD_EN_BASE		0x60
-#define  PM8941_WLED_REG_STR_MOD_MASK		BIT(7)
-#define  PM8941_WLED_REG_STR_MOD_EN		BIT(7)
-
-#define PM8941_WLED_REG_STR_SCALE_BASE		0x62
-#define  PM8941_WLED_REG_STR_SCALE_MASK		0x1f
-
-#define PM8941_WLED_REG_STR_MOD_SRC_BASE	0x63
-#define  PM8941_WLED_REG_STR_MOD_SRC_MASK	0x01
-#define  PM8941_WLED_REG_STR_MOD_SRC_INT	0x00
-#define  PM8941_WLED_REG_STR_MOD_SRC_EXT	0x01
-
-#define PM8941_WLED_REG_STR_CABC_BASE		0x66
-#define  PM8941_WLED_REG_STR_CABC_MASK		BIT(7)
-#define  PM8941_WLED_REG_STR_CABC_EN		BIT(7)
-
-struct pm8941_wled_config {
-	u32 i_boost_limit;
-	u32 ovp;
-	u32 switch_freq;
-	u32 num_strings;
-	u32 i_limit;
-	bool cs_out_en;
-	bool ext_gen;
-	bool cabc_en;
-};
-
-struct pm8941_wled {
-	const char *name;
-	struct regmap *regmap;
-	u16 addr;
-
-	struct pm8941_wled_config cfg;
-};
-
-static int pm8941_wled_update_status(struct backlight_device *bl)
-{
-	struct pm8941_wled *wled = bl_get_data(bl);
-	u16 val = bl->props.brightness;
-	u8 ctrl = 0;
-	int rc;
-	int i;
-
-	if (bl->props.power != FB_BLANK_UNBLANK ||
-	    bl->props.fb_blank != FB_BLANK_UNBLANK ||
-	    bl->props.state & BL_CORE_FBBLANK)
-		val = 0;
-
-	if (val != 0)
-		ctrl = PM8941_WLED_REG_MOD_EN_BIT;
-
-	rc = regmap_update_bits(wled->regmap,
-			wled->addr + PM8941_WLED_REG_MOD_EN,
-			PM8941_WLED_REG_MOD_EN_MASK, ctrl);
-	if (rc)
-		return rc;
-
-	for (i = 0; i < wled->cfg.num_strings; ++i) {
-		u8 v[2] = { val & 0xff, (val >> 8) & 0xf };
-
-		rc = regmap_bulk_write(wled->regmap,
-				wled->addr + PM8941_WLED_REG_VAL_BASE + 2 * i,
-				v, 2);
-		if (rc)
-			return rc;
-	}
-
-	rc = regmap_update_bits(wled->regmap,
-			wled->addr + PM8941_WLED_REG_SYNC,
-			PM8941_WLED_REG_SYNC_MASK, PM8941_WLED_REG_SYNC_ALL);
-	if (rc)
-		return rc;
-
-	rc = regmap_update_bits(wled->regmap,
-			wled->addr + PM8941_WLED_REG_SYNC,
-			PM8941_WLED_REG_SYNC_MASK, PM8941_WLED_REG_SYNC_CLEAR);
-	return rc;
-}
-
-static int pm8941_wled_setup(struct pm8941_wled *wled)
-{
-	int rc;
-	int i;
-
-	rc = regmap_update_bits(wled->regmap,
-			wled->addr + PM8941_WLED_REG_OVP,
-			PM8941_WLED_REG_OVP_MASK, wled->cfg.ovp);
-	if (rc)
-		return rc;
-
-	rc = regmap_update_bits(wled->regmap,
-			wled->addr + PM8941_WLED_REG_BOOST,
-			PM8941_WLED_REG_BOOST_MASK, wled->cfg.i_boost_limit);
-	if (rc)
-		return rc;
-
-	rc = regmap_update_bits(wled->regmap,
-			wled->addr + PM8941_WLED_REG_FREQ,
-			PM8941_WLED_REG_FREQ_MASK, wled->cfg.switch_freq);
-	if (rc)
-		return rc;
-
-	if (wled->cfg.cs_out_en) {
-		u8 all = (BIT(wled->cfg.num_strings) - 1)
-				<< PM8941_WLED_REG_SINK_SHFT;
-
-		rc = regmap_update_bits(wled->regmap,
-				wled->addr + PM8941_WLED_REG_SINK,
-				PM8941_WLED_REG_SINK_MASK, all);
-		if (rc)
-			return rc;
-	}
-
-	for (i = 0; i < wled->cfg.num_strings; ++i) {
-		u16 addr = wled->addr + PM8941_WLED_REG_STR_OFFSET * i;
-
-		rc = regmap_update_bits(wled->regmap,
-				addr + PM8941_WLED_REG_STR_MOD_EN_BASE,
-				PM8941_WLED_REG_STR_MOD_MASK,
-				PM8941_WLED_REG_STR_MOD_EN);
-		if (rc)
-			return rc;
-
-		if (wled->cfg.ext_gen) {
-			rc = regmap_update_bits(wled->regmap,
-					addr + PM8941_WLED_REG_STR_MOD_SRC_BASE,
-					PM8941_WLED_REG_STR_MOD_SRC_MASK,
-					PM8941_WLED_REG_STR_MOD_SRC_EXT);
-			if (rc)
-				return rc;
-		}
-
-		rc = regmap_update_bits(wled->regmap,
-				addr + PM8941_WLED_REG_STR_SCALE_BASE,
-				PM8941_WLED_REG_STR_SCALE_MASK,
-				wled->cfg.i_limit);
-		if (rc)
-			return rc;
-
-		rc = regmap_update_bits(wled->regmap,
-				addr + PM8941_WLED_REG_STR_CABC_BASE,
-				PM8941_WLED_REG_STR_CABC_MASK,
-				wled->cfg.cabc_en ?
-					PM8941_WLED_REG_STR_CABC_EN : 0);
-		if (rc)
-			return rc;
-	}
-
-	return 0;
-}
-
-static const struct pm8941_wled_config pm8941_wled_config_defaults = {
-	.i_boost_limit = 3,
-	.i_limit = 20,
-	.ovp = 2,
-	.switch_freq = 5,
-	.num_strings = 0,
-	.cs_out_en = false,
-	.ext_gen = false,
-	.cabc_en = false,
-};
-
-struct pm8941_wled_var_cfg {
-	const u32 *values;
-	u32 (*fn)(u32);
-	int size;
-};
-
-static const u32 pm8941_wled_i_boost_limit_values[] = {
-	105, 385, 525, 805, 980, 1260, 1400, 1680,
-};
-
-static const struct pm8941_wled_var_cfg pm8941_wled_i_boost_limit_cfg = {
-	.values = pm8941_wled_i_boost_limit_values,
-	.size = ARRAY_SIZE(pm8941_wled_i_boost_limit_values),
-};
-
-static const u32 pm8941_wled_ovp_values[] = {
-	35, 32, 29, 27,
-};
-
-static const struct pm8941_wled_var_cfg pm8941_wled_ovp_cfg = {
-	.values = pm8941_wled_ovp_values,
-	.size = ARRAY_SIZE(pm8941_wled_ovp_values),
-};
-
-static u32 pm8941_wled_num_strings_values_fn(u32 idx)
-{
-	return idx + 1;
-}
-
-static const struct pm8941_wled_var_cfg pm8941_wled_num_strings_cfg = {
-	.fn = pm8941_wled_num_strings_values_fn,
-	.size = 3,
-};
-
-static u32 pm8941_wled_switch_freq_values_fn(u32 idx)
-{
-	return 19200 / (2 * (1 + idx));
-}
-
-static const struct pm8941_wled_var_cfg pm8941_wled_switch_freq_cfg = {
-	.fn = pm8941_wled_switch_freq_values_fn,
-	.size = 16,
-};
-
-static const struct pm8941_wled_var_cfg pm8941_wled_i_limit_cfg = {
-	.size = 26,
-};
-
-static u32 pm8941_wled_values(const struct pm8941_wled_var_cfg *cfg, u32 idx)
-{
-	if (idx >= cfg->size)
-		return UINT_MAX;
-	if (cfg->fn)
-		return cfg->fn(idx);
-	if (cfg->values)
-		return cfg->values[idx];
-	return idx;
-}
-
-static int pm8941_wled_configure(struct pm8941_wled *wled, struct device *dev)
-{
-	struct pm8941_wled_config *cfg = &wled->cfg;
-	u32 val;
-	int rc;
-	u32 c;
-	int i;
-	int j;
-
-	const struct {
-		const char *name;
-		u32 *val_ptr;
-		const struct pm8941_wled_var_cfg *cfg;
-	} u32_opts[] = {
-		{
-			"qcom,current-boost-limit",
-			&cfg->i_boost_limit,
-			.cfg = &pm8941_wled_i_boost_limit_cfg,
-		},
-		{
-			"qcom,current-limit",
-			&cfg->i_limit,
-			.cfg = &pm8941_wled_i_limit_cfg,
-		},
-		{
-			"qcom,ovp",
-			&cfg->ovp,
-			.cfg = &pm8941_wled_ovp_cfg,
-		},
-		{
-			"qcom,switching-freq",
-			&cfg->switch_freq,
-			.cfg = &pm8941_wled_switch_freq_cfg,
-		},
-		{
-			"qcom,num-strings",
-			&cfg->num_strings,
-			.cfg = &pm8941_wled_num_strings_cfg,
-		},
-	};
-	const struct {
-		const char *name;
-		bool *val_ptr;
-	} bool_opts[] = {
-		{ "qcom,cs-out", &cfg->cs_out_en, },
-		{ "qcom,ext-gen", &cfg->ext_gen, },
-		{ "qcom,cabc", &cfg->cabc_en, },
-	};
-
-	rc = of_property_read_u32(dev->of_node, "reg", &val);
-	if (rc || val > 0xffff) {
-		dev_err(dev, "invalid IO resources\n");
-		return rc ? rc : -EINVAL;
-	}
-	wled->addr = val;
-
-	rc = of_property_read_string(dev->of_node, "label", &wled->name);
-	if (rc)
-		wled->name = devm_kasprintf(dev, GFP_KERNEL, "%pOFn", dev->of_node);
-
-	*cfg = pm8941_wled_config_defaults;
-	for (i = 0; i < ARRAY_SIZE(u32_opts); ++i) {
-		rc = of_property_read_u32(dev->of_node, u32_opts[i].name, &val);
-		if (rc == -EINVAL) {
-			continue;
-		} else if (rc) {
-			dev_err(dev, "error reading '%s'\n", u32_opts[i].name);
-			return rc;
-		}
-
-		c = UINT_MAX;
-		for (j = 0; c != val; j++) {
-			c = pm8941_wled_values(u32_opts[i].cfg, j);
-			if (c == UINT_MAX) {
-				dev_err(dev, "invalid value for '%s'\n",
-					u32_opts[i].name);
-				return -EINVAL;
-			}
-		}
-
-		dev_dbg(dev, "'%s' = %u\n", u32_opts[i].name, c);
-		*u32_opts[i].val_ptr = j;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(bool_opts); ++i) {
-		if (of_property_read_bool(dev->of_node, bool_opts[i].name))
-			*bool_opts[i].val_ptr = true;
-	}
-
-	cfg->num_strings = cfg->num_strings + 1;
-
-	return 0;
-}
-
-static const struct backlight_ops pm8941_wled_ops = {
-	.update_status = pm8941_wled_update_status,
-};
-
-static int pm8941_wled_probe(struct platform_device *pdev)
-{
-	struct backlight_properties props;
-	struct backlight_device *bl;
-	struct pm8941_wled *wled;
-	struct regmap *regmap;
-	u32 val;
-	int rc;
-
-	regmap = dev_get_regmap(pdev->dev.parent, NULL);
-	if (!regmap) {
-		dev_err(&pdev->dev, "Unable to get regmap\n");
-		return -EINVAL;
-	}
-
-	wled = devm_kzalloc(&pdev->dev, sizeof(*wled), GFP_KERNEL);
-	if (!wled)
-		return -ENOMEM;
-
-	wled->regmap = regmap;
-
-	rc = pm8941_wled_configure(wled, &pdev->dev);
-	if (rc)
-		return rc;
-
-	rc = pm8941_wled_setup(wled);
-	if (rc)
-		return rc;
-
-	val = PM8941_WLED_DEFAULT_BRIGHTNESS;
-	of_property_read_u32(pdev->dev.of_node, "default-brightness", &val);
-
-	memset(&props, 0, sizeof(struct backlight_properties));
-	props.type = BACKLIGHT_RAW;
-	props.brightness = val;
-	props.max_brightness = PM8941_WLED_REG_VAL_MAX;
-	bl = devm_backlight_device_register(&pdev->dev, wled->name,
-					    &pdev->dev, wled,
-					    &pm8941_wled_ops, &props);
-	return PTR_ERR_OR_ZERO(bl);
-};
-
-static const struct of_device_id pm8941_wled_match_table[] = {
-	{ .compatible = "qcom,pm8941-wled" },
-	{}
-};
-MODULE_DEVICE_TABLE(of, pm8941_wled_match_table);
-
-static struct platform_driver pm8941_wled_driver = {
-	.probe = pm8941_wled_probe,
-	.driver	= {
-		.name = "pm8941-wled",
-		.of_match_table	= pm8941_wled_match_table,
-	},
-};
-
-module_platform_driver(pm8941_wled_driver);
-
-MODULE_DESCRIPTION("pm8941 wled driver");
-MODULE_LICENSE("GPL v2");

drivers/video/backlight/pwm_bl.c

@@ -125,8 +125,9 @@ static int pwm_backlight_update_status(struct backlight_device *bl)
 		state.duty_cycle = compute_duty_cycle(pb, brightness);
 		pwm_apply_state(pb->pwm, &state);
 		pwm_backlight_power_on(pb);
-	} else
+	} else {
 		pwm_backlight_power_off(pb);
+	}
 
 	if (pb->notify_after)
 		pb->notify_after(pb->dev, brightness);
@@ -148,15 +149,16 @@ static const struct backlight_ops pwm_backlight_ops = {
 };
 
 #ifdef CONFIG_OF
-#define PWM_LUMINANCE_SCALE	10000 /* luminance scale */
+#define PWM_LUMINANCE_SHIFT	16
+#define PWM_LUMINANCE_SCALE	(1 << PWM_LUMINANCE_SHIFT) /* luminance scale */
 
 /*
  * CIE lightness to PWM conversion.
  *
  * The CIE 1931 lightness formula is what actually describes how we perceive
  * light:
- *          Y = (L* / 902.3)           if L* ≤ 0.08856
- *          Y = ((L* + 16) / 116)^3    if L* > 0.08856
+ *          Y = (L* / 903.3)           if L* ≤ 8
+ *          Y = ((L* + 16) / 116)^3    if L* > 8
  *
  * Where Y is the luminance, the amount of light coming out of the screen, and
  * is a number between 0.0 and 1.0; and L* is the lightness, how bright a human
@@ -165,16 +167,25 @@ static const struct backlight_ops pwm_backlight_ops = {
  * The following function does the fixed point maths needed to implement the
  * above formula.
  */
-static u64 cie1931(unsigned int lightness, unsigned int scale)
+static u64 cie1931(unsigned int lightness)
 {
 	u64 retval;
 
+	/*
+	 * @lightness is given as a number between 0 and 1, expressed
+	 * as a fixed-point number in scale
+	 * PWM_LUMINANCE_SCALE. Convert to a percentage, still
+	 * expressed as a fixed-point number, so the above formulas
+	 * can be applied.
+	 */
 	lightness *= 100;
-	if (lightness <= (8 * scale)) {
-		retval = DIV_ROUND_CLOSEST_ULL(lightness * 10, 9023);
+	if (lightness <= (8 * PWM_LUMINANCE_SCALE)) {
+		retval = DIV_ROUND_CLOSEST(lightness * 10, 9033);
 	} else {
-		retval = int_pow((lightness + (16 * scale)) / 116, 3);
-		retval = DIV_ROUND_CLOSEST_ULL(retval, (scale * scale));
+		retval = (lightness + (16 * PWM_LUMINANCE_SCALE)) / 116;
+		retval *= retval * retval;
+		retval += 1ULL << (2*PWM_LUMINANCE_SHIFT - 1);
+		retval >>= 2*PWM_LUMINANCE_SHIFT;
 	}
 
 	return retval;
@@ -208,8 +219,7 @@ int pwm_backlight_brightness_default(struct device *dev,
 	/* Fill the table using the cie1931 algorithm */
 	for (i = 0; i < data->max_brightness; i++) {
 		retval = cie1931((i * PWM_LUMINANCE_SCALE) /
-				 data->max_brightness, PWM_LUMINANCE_SCALE) *
-				 period;
+				 data->max_brightness) * period;
 		retval = DIV_ROUND_CLOSEST_ULL(retval, PWM_LUMINANCE_SCALE);
 		if (retval > UINT_MAX)
 			return -EINVAL;
@@ -564,18 +574,17 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 	memset(&props, 0, sizeof(struct backlight_properties));
 
 	if (data->levels) {
+		pb->levels = data->levels;
+
 		/*
 		 * For the DT case, only when brightness levels is defined
 		 * data->levels is filled. For the non-DT case, data->levels
 		 * can come from platform data, however is not usual.
 		 */
-		for (i = 0; i <= data->max_brightness; i++) {
+		for (i = 0; i <= data->max_brightness; i++)
 			if (data->levels[i] > pb->scale)
 				pb->scale = data->levels[i];
 
-			pb->levels = data->levels;
-		}
-
 		if (pwm_backlight_is_linear(data))
 			props.scale = BACKLIGHT_SCALE_LINEAR;
 		else

drivers/video/backlight/qcom-wled.c

+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (c) 2015, Sony Mobile Communications, AB.
+ */
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/ktime.h>
+#include <linux/kernel.h>
+#include <linux/backlight.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+
+/* From DT binding */
+#define WLED_MAX_STRINGS				4
+
+#define WLED_DEFAULT_BRIGHTNESS				2048
+#define WLED_SOFT_START_DLY_US				10000
+#define WLED3_SINK_REG_BRIGHT_MAX			0xFFF
+
+/* WLED3/WLED4 control registers */
+#define WLED3_CTRL_REG_FAULT_STATUS			0x08
+#define  WLED3_CTRL_REG_ILIM_FAULT_BIT			BIT(0)
+#define  WLED3_CTRL_REG_OVP_FAULT_BIT			BIT(1)
+#define  WLED4_CTRL_REG_SC_FAULT_BIT			BIT(2)
+
+#define WLED3_CTRL_REG_INT_RT_STS			0x10
+#define  WLED3_CTRL_REG_OVP_FAULT_STATUS		BIT(1)
+
+#define WLED3_CTRL_REG_MOD_EN				0x46
+#define  WLED3_CTRL_REG_MOD_EN_MASK			BIT(7)
+#define  WLED3_CTRL_REG_MOD_EN_SHIFT			7
+
+#define WLED3_CTRL_REG_FEEDBACK_CONTROL			0x48
+
+#define WLED3_CTRL_REG_FREQ				0x4c
+#define  WLED3_CTRL_REG_FREQ_MASK			GENMASK(3, 0)
+
+#define WLED3_CTRL_REG_OVP				0x4d
+#define  WLED3_CTRL_REG_OVP_MASK			GENMASK(1, 0)
+
+#define WLED3_CTRL_REG_ILIMIT				0x4e
+#define  WLED3_CTRL_REG_ILIMIT_MASK			GENMASK(2, 0)
+
+/* WLED3/WLED4 sink registers */
+#define WLED3_SINK_REG_SYNC				0x47
+#define  WLED3_SINK_REG_SYNC_CLEAR			0x00
+
+#define WLED3_SINK_REG_CURR_SINK			0x4f
+#define  WLED3_SINK_REG_CURR_SINK_MASK			GENMASK(7, 5)
+#define  WLED3_SINK_REG_CURR_SINK_SHFT			5
+
+/* WLED3 specific per-'string' registers below */
+#define WLED3_SINK_REG_BRIGHT(n)			(0x40 + n)
+
+#define WLED3_SINK_REG_STR_MOD_EN(n)			(0x60 + (n * 0x10))
+#define  WLED3_SINK_REG_STR_MOD_MASK			BIT(7)
+
+#define WLED3_SINK_REG_STR_FULL_SCALE_CURR(n)		(0x62 + (n * 0x10))
+#define  WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK	GENMASK(4, 0)
+
+#define WLED3_SINK_REG_STR_MOD_SRC(n)			(0x63 + (n * 0x10))
+#define  WLED3_SINK_REG_STR_MOD_SRC_MASK		BIT(0)
+#define  WLED3_SINK_REG_STR_MOD_SRC_INT			0x00
+#define  WLED3_SINK_REG_STR_MOD_SRC_EXT			0x01
+
+#define WLED3_SINK_REG_STR_CABC(n)			(0x66 + (n * 0x10))
+#define  WLED3_SINK_REG_STR_CABC_MASK			BIT(7)
+
+/* WLED4 specific control registers */
+#define WLED4_CTRL_REG_SHORT_PROTECT			0x5e
+#define  WLED4_CTRL_REG_SHORT_EN_MASK			BIT(7)
+
+#define WLED4_CTRL_REG_SEC_ACCESS			0xd0
+#define  WLED4_CTRL_REG_SEC_UNLOCK			0xa5
+
+#define WLED4_CTRL_REG_TEST1				0xe2
+#define  WLED4_CTRL_REG_TEST1_EXT_FET_DTEST2		0x09
+
+/* WLED4 specific sink registers */
+#define WLED4_SINK_REG_CURR_SINK			0x46
+#define  WLED4_SINK_REG_CURR_SINK_MASK			GENMASK(7, 4)
+#define  WLED4_SINK_REG_CURR_SINK_SHFT			4
+
+/* WLED4 specific per-'string' registers below */
+#define WLED4_SINK_REG_STR_MOD_EN(n)			(0x50 + (n * 0x10))
+#define  WLED4_SINK_REG_STR_MOD_MASK			BIT(7)
+
+#define WLED4_SINK_REG_STR_FULL_SCALE_CURR(n)		(0x52 + (n * 0x10))
+#define  WLED4_SINK_REG_STR_FULL_SCALE_CURR_MASK	GENMASK(3, 0)
+
+#define WLED4_SINK_REG_STR_MOD_SRC(n)			(0x53 + (n * 0x10))
+#define  WLED4_SINK_REG_STR_MOD_SRC_MASK		BIT(0)
+#define  WLED4_SINK_REG_STR_MOD_SRC_INT			0x00
+#define  WLED4_SINK_REG_STR_MOD_SRC_EXT			0x01
+
+#define WLED4_SINK_REG_STR_CABC(n)			(0x56 + (n * 0x10))
+#define  WLED4_SINK_REG_STR_CABC_MASK			BIT(7)
+
+#define WLED4_SINK_REG_BRIGHT(n)			(0x57 + (n * 0x10))
+
+struct wled_var_cfg {
+	const u32 *values;
+	u32 (*fn)(u32);
+	int size;
+};
+
+struct wled_u32_opts {
+	const char *name;
+	u32 *val_ptr;
+	const struct wled_var_cfg *cfg;
+};
+
+struct wled_bool_opts {
+	const char *name;
+	bool *val_ptr;
+};
+
+struct wled_config {
+	u32 boost_i_limit;
+	u32 ovp;
+	u32 switch_freq;
+	u32 num_strings;
+	u32 string_i_limit;
+	u32 enabled_strings[WLED_MAX_STRINGS];
+	bool cs_out_en;
+	bool ext_gen;
+	bool cabc;
+	bool external_pfet;
+	bool auto_detection_enabled;
+};
+
+struct wled {
+	const char *name;
+	struct device *dev;
+	struct regmap *regmap;
+	struct mutex lock;	/* Lock to avoid race from thread irq handler */
+	ktime_t last_short_event;
+	ktime_t start_ovp_fault_time;
+	u16 ctrl_addr;
+	u16 sink_addr;
+	u16 max_string_count;
+	u16 auto_detection_ovp_count;
+	u32 brightness;
+	u32 max_brightness;
+	u32 short_count;
+	u32 auto_detect_count;
+	bool disabled_by_short;
+	bool has_short_detect;
+	int short_irq;
+	int ovp_irq;
+
+	struct wled_config cfg;
+	struct delayed_work ovp_work;
+	int (*wled_set_brightness)(struct wled *wled, u16 brightness);
+};
+
+static int wled3_set_brightness(struct wled *wled, u16 brightness)
+{
+	int rc, i;
+	u8 v[2];
+
+	v[0] = brightness & 0xff;
+	v[1] = (brightness >> 8) & 0xf;
+
+	for (i = 0;  i < wled->cfg.num_strings; ++i) {
+		rc = regmap_bulk_write(wled->regmap, wled->ctrl_addr +
+				       WLED3_SINK_REG_BRIGHT(i), v, 2);
+		if (rc < 0)
+			return rc;
+	}
+
+	return 0;
+}
+
+static int wled4_set_brightness(struct wled *wled, u16 brightness)
+{
+	int rc, i;
+	u16 low_limit = wled->max_brightness * 4 / 1000;
+	u8 v[2];
+
+	/* WLED4's lower limit of operation is 0.4% */
+	if (brightness > 0 && brightness < low_limit)
+		brightness = low_limit;
+
+	v[0] = brightness & 0xff;
+	v[1] = (brightness >> 8) & 0xf;
+
+	for (i = 0;  i < wled->cfg.num_strings; ++i) {
+		rc = regmap_bulk_write(wled->regmap, wled->sink_addr +
+				       WLED4_SINK_REG_BRIGHT(i), v, 2);
+		if (rc < 0)
+			return rc;
+	}
+
+	return 0;
+}
+
+static void wled_ovp_work(struct work_struct *work)
+{
+	struct wled *wled = container_of(work,
+					 struct wled, ovp_work.work);
+	enable_irq(wled->ovp_irq);
+}
+
+static int wled_module_enable(struct wled *wled, int val)
+{
+	int rc;
+
+	if (wled->disabled_by_short)
+		return -ENXIO;
+
+	rc = regmap_update_bits(wled->regmap, wled->ctrl_addr +
+				WLED3_CTRL_REG_MOD_EN,
+				WLED3_CTRL_REG_MOD_EN_MASK,
+				val << WLED3_CTRL_REG_MOD_EN_SHIFT);
+	if (rc < 0)
+		return rc;
+
+	if (wled->ovp_irq > 0) {
+		if (val) {
+			/*
+			 * The hardware generates a storm of spurious OVP
+			 * interrupts during soft start operations. So defer
+			 * enabling the IRQ for 10ms to ensure that the
+			 * soft start is complete.
+			 */
+			schedule_delayed_work(&wled->ovp_work, HZ / 100);
+		} else {
+			if (!cancel_delayed_work_sync(&wled->ovp_work))
+				disable_irq(wled->ovp_irq);
+		}
+	}
+
+	return 0;
+}
+
+static int wled_sync_toggle(struct wled *wled)
+{
+	int rc;
+	unsigned int mask = GENMASK(wled->max_string_count - 1, 0);
+
+	rc = regmap_update_bits(wled->regmap,
+				wled->ctrl_addr + WLED3_SINK_REG_SYNC,
+				mask, mask);
+	if (rc < 0)
+		return rc;
+
+	rc = regmap_update_bits(wled->regmap,
+				wled->ctrl_addr + WLED3_SINK_REG_SYNC,
+				mask, WLED3_SINK_REG_SYNC_CLEAR);
+
+	return rc;
+}
+
+static int wled_update_status(struct backlight_device *bl)
+{
+	struct wled *wled = bl_get_data(bl);
+	u16 brightness = bl->props.brightness;
+	int rc = 0;
+
+	if (bl->props.power != FB_BLANK_UNBLANK ||
+	    bl->props.fb_blank != FB_BLANK_UNBLANK ||
+	    bl->props.state & BL_CORE_FBBLANK)
+		brightness = 0;
+
+	mutex_lock(&wled->lock);
+	if (brightness) {
+		rc = wled->wled_set_brightness(wled, brightness);
+		if (rc < 0) {
+			dev_err(wled->dev, "wled failed to set brightness rc:%d\n",
+				rc);
+			goto unlock_mutex;
+		}
+
+		rc = wled_sync_toggle(wled);
+		if (rc < 0) {
+			dev_err(wled->dev, "wled sync failed rc:%d\n", rc);
+			goto unlock_mutex;
+		}
+	}
+
+	if (!!brightness != !!wled->brightness) {
+		rc = wled_module_enable(wled, !!brightness);
+		if (rc < 0) {
+			dev_err(wled->dev, "wled enable failed rc:%d\n", rc);
+			goto unlock_mutex;
+		}
+	}
+
+	wled->brightness = brightness;
+
+unlock_mutex:
+	mutex_unlock(&wled->lock);
+
+	return rc;
+}
+
+#define WLED_SHORT_DLY_MS			20
+#define WLED_SHORT_CNT_MAX			5
+#define WLED_SHORT_RESET_CNT_DLY_US		USEC_PER_SEC
+
+static irqreturn_t wled_short_irq_handler(int irq, void *_wled)
+{
+	struct wled *wled = _wled;
+	int rc;
+	s64 elapsed_time;
+
+	wled->short_count++;
+	mutex_lock(&wled->lock);
+	rc = wled_module_enable(wled, false);
+	if (rc < 0) {
+		dev_err(wled->dev, "wled disable failed rc:%d\n", rc);
+		goto unlock_mutex;
+	}
+
+	elapsed_time = ktime_us_delta(ktime_get(),
+				      wled->last_short_event);
+	if (elapsed_time > WLED_SHORT_RESET_CNT_DLY_US)
+		wled->short_count = 1;
+
+	if (wled->short_count > WLED_SHORT_CNT_MAX) {
+		dev_err(wled->dev, "Short triggered %d times, disabling WLED forever!\n",
+			wled->short_count);
+		wled->disabled_by_short = true;
+		goto unlock_mutex;
+	}
+
+	wled->last_short_event = ktime_get();
+
+	msleep(WLED_SHORT_DLY_MS);
+	rc = wled_module_enable(wled, true);
+	if (rc < 0)
+		dev_err(wled->dev, "wled enable failed rc:%d\n", rc);
+
+unlock_mutex:
+	mutex_unlock(&wled->lock);
+
+	return IRQ_HANDLED;
+}
+
+#define AUTO_DETECT_BRIGHTNESS		200
+
+static void wled_auto_string_detection(struct wled *wled)
+{
+	int rc = 0, i;
+	u32 sink_config = 0, int_sts;
+	u8 sink_test = 0, sink_valid = 0, val;
+
+	/* Read configured sink configuration */
+	rc = regmap_read(wled->regmap, wled->sink_addr +
+			 WLED4_SINK_REG_CURR_SINK, &sink_config);
+	if (rc < 0) {
+		dev_err(wled->dev, "Failed to read SINK configuration rc=%d\n",
+			rc);
+		goto failed_detect;
+	}
+
+	/* Disable the module before starting detection */
+	rc = regmap_update_bits(wled->regmap,
+				wled->ctrl_addr + WLED3_CTRL_REG_MOD_EN,
+				WLED3_CTRL_REG_MOD_EN_MASK, 0);
+	if (rc < 0) {
+		dev_err(wled->dev, "Failed to disable WLED module rc=%d\n", rc);
+		goto failed_detect;
+	}
+
+	/* Set low brightness across all sinks */
+	rc = wled4_set_brightness(wled, AUTO_DETECT_BRIGHTNESS);
+	if (rc < 0) {
+		dev_err(wled->dev, "Failed to set brightness for auto detection rc=%d\n",
+			rc);
+		goto failed_detect;
+	}
+
+	if (wled->cfg.cabc) {
+		for (i = 0; i < wled->cfg.num_strings; i++) {
+			rc = regmap_update_bits(wled->regmap, wled->sink_addr +
+						WLED4_SINK_REG_STR_CABC(i),
+						WLED4_SINK_REG_STR_CABC_MASK,
+						0);
+			if (rc < 0)
+				goto failed_detect;
+		}
+	}
+
+	/* Disable all sinks */
+	rc = regmap_write(wled->regmap,
+			  wled->sink_addr + WLED4_SINK_REG_CURR_SINK, 0);
+	if (rc < 0) {
+		dev_err(wled->dev, "Failed to disable all sinks rc=%d\n", rc);
+		goto failed_detect;
+	}
+
+	/* Iterate through the strings one by one */
+	for (i = 0; i < wled->cfg.num_strings; i++) {
+		sink_test = BIT((WLED4_SINK_REG_CURR_SINK_SHFT + i));
+
+		/* Enable feedback control */
+		rc = regmap_write(wled->regmap, wled->ctrl_addr +
+				  WLED3_CTRL_REG_FEEDBACK_CONTROL, i + 1);
+		if (rc < 0) {
+			dev_err(wled->dev, "Failed to enable feedback for SINK %d rc = %d\n",
+				i + 1, rc);
+			goto failed_detect;
+		}
+
+		/* Enable the sink */
+		rc = regmap_write(wled->regmap, wled->sink_addr +
+				  WLED4_SINK_REG_CURR_SINK, sink_test);
+		if (rc < 0) {
+			dev_err(wled->dev, "Failed to configure SINK %d rc=%d\n",
+				i + 1, rc);
+			goto failed_detect;
+		}
+
+		/* Enable the module */
+		rc = regmap_update_bits(wled->regmap, wled->ctrl_addr +
+					WLED3_CTRL_REG_MOD_EN,
+					WLED3_CTRL_REG_MOD_EN_MASK,
+					WLED3_CTRL_REG_MOD_EN_MASK);
+		if (rc < 0) {
+			dev_err(wled->dev, "Failed to enable WLED module rc=%d\n",
+				rc);
+			goto failed_detect;
+		}
+
+		usleep_range(WLED_SOFT_START_DLY_US,
+			     WLED_SOFT_START_DLY_US + 1000);
+
+		rc = regmap_read(wled->regmap, wled->ctrl_addr +
+				 WLED3_CTRL_REG_INT_RT_STS, &int_sts);
+		if (rc < 0) {
+			dev_err(wled->dev, "Error in reading WLED3_CTRL_INT_RT_STS rc=%d\n",
+				rc);
+			goto failed_detect;
+		}
+
+		if (int_sts & WLED3_CTRL_REG_OVP_FAULT_STATUS)
+			dev_dbg(wled->dev, "WLED OVP fault detected with SINK %d\n",
+				i + 1);
+		else
+			sink_valid |= sink_test;
+
+		/* Disable the module */
+		rc = regmap_update_bits(wled->regmap,
+					wled->ctrl_addr + WLED3_CTRL_REG_MOD_EN,
+					WLED3_CTRL_REG_MOD_EN_MASK, 0);
+		if (rc < 0) {
+			dev_err(wled->dev, "Failed to disable WLED module rc=%d\n",
+				rc);
+			goto failed_detect;
+		}
+	}
+
+	if (!sink_valid) {
+		dev_err(wled->dev, "No valid WLED sinks found\n");
+		wled->disabled_by_short = true;
+		goto failed_detect;
+	}
+
+	if (sink_valid != sink_config) {
+		dev_warn(wled->dev, "%x is not a valid sink configuration - using %x instead\n",
+			 sink_config, sink_valid);
+		sink_config = sink_valid;
+	}
+
+	/* Write the new sink configuration */
+	rc = regmap_write(wled->regmap,
+			  wled->sink_addr + WLED4_SINK_REG_CURR_SINK,
+			  sink_config);
+	if (rc < 0) {
+		dev_err(wled->dev, "Failed to reconfigure the default sink rc=%d\n",
+			rc);
+		goto failed_detect;
+	}
+
+	/* Enable valid sinks */
+	for (i = 0; i < wled->cfg.num_strings; i++) {
+		if (wled->cfg.cabc) {
+			rc = regmap_update_bits(wled->regmap, wled->sink_addr +
+						WLED4_SINK_REG_STR_CABC(i),
+						WLED4_SINK_REG_STR_CABC_MASK,
+						WLED4_SINK_REG_STR_CABC_MASK);
+			if (rc < 0)
+				goto failed_detect;
+		}
+
+		if (sink_config & BIT(WLED4_SINK_REG_CURR_SINK_SHFT + i))
+			val = WLED4_SINK_REG_STR_MOD_MASK;
+		else
+			val = 0x0; /* Disable modulator_en for unused sink */
+
+		rc = regmap_write(wled->regmap, wled->sink_addr +
+				  WLED4_SINK_REG_STR_MOD_EN(i), val);
+		if (rc < 0) {
+			dev_err(wled->dev, "Failed to configure MODULATOR_EN rc=%d\n",
+				rc);
+			goto failed_detect;
+		}
+	}
+
+	/* Restore the feedback setting */
+	rc = regmap_write(wled->regmap,
+			  wled->ctrl_addr + WLED3_CTRL_REG_FEEDBACK_CONTROL, 0);
+	if (rc < 0) {
+		dev_err(wled->dev, "Failed to restore feedback setting rc=%d\n",
+			rc);
+		goto failed_detect;
+	}
+
+	/* Restore brightness */
+	rc = wled4_set_brightness(wled, wled->brightness);
+	if (rc < 0) {
+		dev_err(wled->dev, "Failed to set brightness after auto detection rc=%d\n",
+			rc);
+		goto failed_detect;
+	}
+
+	rc = regmap_update_bits(wled->regmap,
+				wled->ctrl_addr + WLED3_CTRL_REG_MOD_EN,
+				WLED3_CTRL_REG_MOD_EN_MASK,
+				WLED3_CTRL_REG_MOD_EN_MASK);
+	if (rc < 0) {
+		dev_err(wled->dev, "Failed to enable WLED module rc=%d\n", rc);
+		goto failed_detect;
+	}
+
+failed_detect:
+	return;
+}
+
+#define WLED_AUTO_DETECT_OVP_COUNT		5
+#define WLED_AUTO_DETECT_CNT_DLY_US		USEC_PER_SEC
+static bool wled_auto_detection_required(struct wled *wled)
+{
+	s64 elapsed_time_us;
+
+	if (!wled->cfg.auto_detection_enabled)
+		return false;
+
+	/*
+	 * Check if the OVP fault was an occasional one
+	 * or if it's firing continuously, the latter qualifies
+	 * for an auto-detection check.
+	 */
+	if (!wled->auto_detection_ovp_count) {
+		wled->start_ovp_fault_time = ktime_get();
+		wled->auto_detection_ovp_count++;
+	} else {
+		elapsed_time_us = ktime_us_delta(ktime_get(),
+						 wled->start_ovp_fault_time);
+		if (elapsed_time_us > WLED_AUTO_DETECT_CNT_DLY_US)
+			wled->auto_detection_ovp_count = 0;
+		else
+			wled->auto_detection_ovp_count++;
+
+		if (wled->auto_detection_ovp_count >=
+				WLED_AUTO_DETECT_OVP_COUNT) {
+			wled->auto_detection_ovp_count = 0;
+			return true;
+		}
+	}
+
+	return false;
+}
+
+static int wled_auto_detection_at_init(struct wled *wled)
+{
+	int rc;
+	u32 fault_status, rt_status;
+
+	if (!wled->cfg.auto_detection_enabled)
+		return 0;
+
+	rc = regmap_read(wled->regmap,
+			 wled->ctrl_addr + WLED3_CTRL_REG_INT_RT_STS,
+			 &rt_status);
+	if (rc < 0) {
+		dev_err(wled->dev, "Failed to read RT status rc=%d\n", rc);
+		return rc;
+	}
+
+	rc = regmap_read(wled->regmap,
+			 wled->ctrl_addr + WLED3_CTRL_REG_FAULT_STATUS,
+			 &fault_status);
+	if (rc < 0) {
+		dev_err(wled->dev, "Failed to read fault status rc=%d\n", rc);
+		return rc;
+	}
+
+	if ((rt_status & WLED3_CTRL_REG_OVP_FAULT_STATUS) ||
+	    (fault_status & WLED3_CTRL_REG_OVP_FAULT_BIT)) {
+		mutex_lock(&wled->lock);
+		wled_auto_string_detection(wled);
+		mutex_unlock(&wled->lock);
+	}
+
+	return rc;
+}
+
+static irqreturn_t wled_ovp_irq_handler(int irq, void *_wled)
+{
+	struct wled *wled = _wled;
+	int rc;
+	u32 int_sts, fault_sts;
+
+	rc = regmap_read(wled->regmap,
+			 wled->ctrl_addr + WLED3_CTRL_REG_INT_RT_STS, &int_sts);
+	if (rc < 0) {
+		dev_err(wled->dev, "Error in reading WLED3_INT_RT_STS rc=%d\n",
+			rc);
+		return IRQ_HANDLED;
+	}
+
+	rc = regmap_read(wled->regmap, wled->ctrl_addr +
+			 WLED3_CTRL_REG_FAULT_STATUS, &fault_sts);
+	if (rc < 0) {
+		dev_err(wled->dev, "Error in reading WLED_FAULT_STATUS rc=%d\n",
+			rc);
+		return IRQ_HANDLED;
+	}
+
+	if (fault_sts & (WLED3_CTRL_REG_OVP_FAULT_BIT |
+		WLED3_CTRL_REG_ILIM_FAULT_BIT))
+		dev_dbg(wled->dev, "WLED OVP fault detected, int_sts=%x fault_sts= %x\n",
+			int_sts, fault_sts);
+
+	if (fault_sts & WLED3_CTRL_REG_OVP_FAULT_BIT) {
+		if (wled_auto_detection_required(wled)) {
+			mutex_lock(&wled->lock);
+			wled_auto_string_detection(wled);
+			mutex_unlock(&wled->lock);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int wled3_setup(struct wled *wled)
+{
+	u16 addr;
+	u8 sink_en = 0;
+	int rc, i, j;
+
+	rc = regmap_update_bits(wled->regmap,
+				wled->ctrl_addr + WLED3_CTRL_REG_OVP,
+				WLED3_CTRL_REG_OVP_MASK, wled->cfg.ovp);
+	if (rc)
+		return rc;
+
+	rc = regmap_update_bits(wled->regmap,
+				wled->ctrl_addr + WLED3_CTRL_REG_ILIMIT,
+				WLED3_CTRL_REG_ILIMIT_MASK,
+				wled->cfg.boost_i_limit);
+	if (rc)
+		return rc;
+
+	rc = regmap_update_bits(wled->regmap,
+				wled->ctrl_addr + WLED3_CTRL_REG_FREQ,
+				WLED3_CTRL_REG_FREQ_MASK,
+				wled->cfg.switch_freq);
+	if (rc)
+		return rc;
+
+	for (i = 0; i < wled->cfg.num_strings; ++i) {
+		j = wled->cfg.enabled_strings[i];
+		addr = wled->ctrl_addr + WLED3_SINK_REG_STR_MOD_EN(j);
+		rc = regmap_update_bits(wled->regmap, addr,
+					WLED3_SINK_REG_STR_MOD_MASK,
+					WLED3_SINK_REG_STR_MOD_MASK);
+		if (rc)
+			return rc;
+
+		if (wled->cfg.ext_gen) {
+			addr = wled->ctrl_addr + WLED3_SINK_REG_STR_MOD_SRC(j);
+			rc = regmap_update_bits(wled->regmap, addr,
+						WLED3_SINK_REG_STR_MOD_SRC_MASK,
+						WLED3_SINK_REG_STR_MOD_SRC_EXT);
+			if (rc)
+				return rc;
+		}
+
+		addr = wled->ctrl_addr + WLED3_SINK_REG_STR_FULL_SCALE_CURR(j);
+		rc = regmap_update_bits(wled->regmap, addr,
+					WLED3_SINK_REG_STR_FULL_SCALE_CURR_MASK,
+					wled->cfg.string_i_limit);
+		if (rc)
+			return rc;
+
+		addr = wled->ctrl_addr + WLED3_SINK_REG_STR_CABC(j);
+		rc = regmap_update_bits(wled->regmap, addr,
+					WLED3_SINK_REG_STR_CABC_MASK,
+					wled->cfg.cabc ?
+					WLED3_SINK_REG_STR_CABC_MASK : 0);
+		if (rc)
+			return rc;
+
+		sink_en |= BIT(j + WLED3_SINK_REG_CURR_SINK_SHFT);
+	}
+
+	rc = regmap_update_bits(wled->regmap,
+				wled->ctrl_addr + WLED3_SINK_REG_CURR_SINK,
+				WLED3_SINK_REG_CURR_SINK_MASK, sink_en);
+	if (rc)
+		return rc;
+
+	return 0;
+}
+
+static const struct wled_config wled3_config_defaults = {
+	.boost_i_limit = 3,
+	.string_i_limit = 20,
+	.ovp = 2,
+	.num_strings = 3,
+	.switch_freq = 5,
+	.cs_out_en = false,
+	.ext_gen = false,
+	.cabc = false,
+	.enabled_strings = {0, 1, 2, 3},
+};
+
+static int wled4_setup(struct wled *wled)
+{
+	int rc, temp, i, j;
+	u16 addr;
+	u8 sink_en = 0;
+	u32 sink_cfg;
+
+	rc = regmap_update_bits(wled->regmap,
+				wled->ctrl_addr + WLED3_CTRL_REG_OVP,
+				WLED3_CTRL_REG_OVP_MASK, wled->cfg.ovp);
+	if (rc < 0)
+		return rc;
+
+	rc = regmap_update_bits(wled->regmap,
+				wled->ctrl_addr + WLED3_CTRL_REG_ILIMIT,
+				WLED3_CTRL_REG_ILIMIT_MASK,
+				wled->cfg.boost_i_limit);
+	if (rc < 0)
+		return rc;
+
+	rc = regmap_update_bits(wled->regmap,
+				wled->ctrl_addr + WLED3_CTRL_REG_FREQ,
+				WLED3_CTRL_REG_FREQ_MASK,
+				wled->cfg.switch_freq);
+	if (rc < 0)
+		return rc;
+
+	if (wled->cfg.external_pfet) {
+		/* Unlock the secure register access */
+		rc = regmap_write(wled->regmap, wled->ctrl_addr +
+				  WLED4_CTRL_REG_SEC_ACCESS,
+				  WLED4_CTRL_REG_SEC_UNLOCK);
+		if (rc < 0)
+			return rc;
+
+		rc = regmap_write(wled->regmap,
+				  wled->ctrl_addr + WLED4_CTRL_REG_TEST1,
+				  WLED4_CTRL_REG_TEST1_EXT_FET_DTEST2);
+		if (rc < 0)
+			return rc;
+	}
+
+	rc = regmap_read(wled->regmap, wled->sink_addr +
+			 WLED4_SINK_REG_CURR_SINK, &sink_cfg);
+	if (rc < 0)
+		return rc;
+
+	for (i = 0; i < wled->cfg.num_strings; i++) {
+		j = wled->cfg.enabled_strings[i];
+		temp = j + WLED4_SINK_REG_CURR_SINK_SHFT;
+		sink_en |= 1 << temp;
+	}
+
+	if (sink_cfg == sink_en) {
+		rc = wled_auto_detection_at_init(wled);
+		return rc;
+	}
+
+	rc = regmap_update_bits(wled->regmap,
+				wled->sink_addr + WLED4_SINK_REG_CURR_SINK,
+				WLED4_SINK_REG_CURR_SINK_MASK, 0);
+	if (rc < 0)
+		return rc;
+
+	rc = regmap_update_bits(wled->regmap, wled->ctrl_addr +
+				WLED3_CTRL_REG_MOD_EN,
+				WLED3_CTRL_REG_MOD_EN_MASK, 0);
+	if (rc < 0)
+		return rc;
+
+	/* Per sink/string configuration */
+	for (i = 0; i < wled->cfg.num_strings; i++) {
+		j = wled->cfg.enabled_strings[i];
+
+		addr = wled->sink_addr +
+				WLED4_SINK_REG_STR_MOD_EN(j);
+		rc = regmap_update_bits(wled->regmap, addr,
+					WLED4_SINK_REG_STR_MOD_MASK,
+					WLED4_SINK_REG_STR_MOD_MASK);
+		if (rc < 0)
+			return rc;
+
+		addr = wled->sink_addr +
+				WLED4_SINK_REG_STR_FULL_SCALE_CURR(j);
+		rc = regmap_update_bits(wled->regmap, addr,
+					WLED4_SINK_REG_STR_FULL_SCALE_CURR_MASK,
+					wled->cfg.string_i_limit);
+		if (rc < 0)
+			return rc;
+
+		addr = wled->sink_addr +
+				WLED4_SINK_REG_STR_CABC(j);
+		rc = regmap_update_bits(wled->regmap, addr,
+					WLED4_SINK_REG_STR_CABC_MASK,
+					wled->cfg.cabc ?
+					WLED4_SINK_REG_STR_CABC_MASK : 0);
+		if (rc < 0)
+			return rc;
+	}
+
+	rc = regmap_update_bits(wled->regmap, wled->ctrl_addr +
+				WLED3_CTRL_REG_MOD_EN,
+				WLED3_CTRL_REG_MOD_EN_MASK,
+				WLED3_CTRL_REG_MOD_EN_MASK);
+	if (rc < 0)
+		return rc;
+
+	rc = regmap_update_bits(wled->regmap,
+				wled->sink_addr + WLED4_SINK_REG_CURR_SINK,
+				WLED4_SINK_REG_CURR_SINK_MASK, sink_en);
+	if (rc < 0)
+		return rc;
+
+	rc = wled_sync_toggle(wled);
+	if (rc < 0) {
+		dev_err(wled->dev, "Failed to toggle sync reg rc:%d\n", rc);
+		return rc;
+	}
+
+	rc = wled_auto_detection_at_init(wled);
+
+	return rc;
+}
+
+static const struct wled_config wled4_config_defaults = {
+	.boost_i_limit = 4,
+	.string_i_limit = 10,
+	.ovp = 1,
+	.num_strings = 4,
+	.switch_freq = 11,
+	.cabc = false,
+	.external_pfet = false,
+	.auto_detection_enabled = false,
+};
+
+static const u32 wled3_boost_i_limit_values[] = {
+	105, 385, 525, 805, 980, 1260, 1400, 1680,
+};
+
+static const struct wled_var_cfg wled3_boost_i_limit_cfg = {
+	.values = wled3_boost_i_limit_values,
+	.size = ARRAY_SIZE(wled3_boost_i_limit_values),
+};
+
+static const u32 wled4_boost_i_limit_values[] = {
+	105, 280, 450, 620, 970, 1150, 1300, 1500,
+};
+
+static const struct wled_var_cfg wled4_boost_i_limit_cfg = {
+	.values = wled4_boost_i_limit_values,
+	.size = ARRAY_SIZE(wled4_boost_i_limit_values),
+};
+
+static const u32 wled3_ovp_values[] = {
+	35, 32, 29, 27,
+};
+
+static const struct wled_var_cfg wled3_ovp_cfg = {
+	.values = wled3_ovp_values,
+	.size = ARRAY_SIZE(wled3_ovp_values),
+};
+
+static const u32 wled4_ovp_values[] = {
+	31100, 29600, 19600, 18100,
+};
+
+static const struct wled_var_cfg wled4_ovp_cfg = {
+	.values = wled4_ovp_values,
+	.size = ARRAY_SIZE(wled4_ovp_values),
+};
+
+static u32 wled3_num_strings_values_fn(u32 idx)
+{
+	return idx + 1;
+}
+
+static const struct wled_var_cfg wled3_num_strings_cfg = {
+	.fn = wled3_num_strings_values_fn,
+	.size = 3,
+};
+
+static const struct wled_var_cfg wled4_num_strings_cfg = {
+	.fn = wled3_num_strings_values_fn,
+	.size = 4,
+};
+
+static u32 wled3_switch_freq_values_fn(u32 idx)
+{
+	return 19200 / (2 * (1 + idx));
+}
+
+static const struct wled_var_cfg wled3_switch_freq_cfg = {
+	.fn = wled3_switch_freq_values_fn,
+	.size = 16,
+};
+
+static const struct wled_var_cfg wled3_string_i_limit_cfg = {
+	.size = 26,
+};
+
+static const u32 wled4_string_i_limit_values[] = {
+	0, 2500, 5000, 7500, 10000, 12500, 15000, 17500, 20000,
+	22500, 25000, 27500, 30000,
+};
+
+static const struct wled_var_cfg wled4_string_i_limit_cfg = {
+	.values = wled4_string_i_limit_values,
+	.size = ARRAY_SIZE(wled4_string_i_limit_values),
+};
+
+static const struct wled_var_cfg wled3_string_cfg = {
+	.size = 8,
+};
+
+static const struct wled_var_cfg wled4_string_cfg = {
+	.size = 16,
+};
+
+static u32 wled_values(const struct wled_var_cfg *cfg, u32 idx)
+{
+	if (idx >= cfg->size)
+		return UINT_MAX;
+	if (cfg->fn)
+		return cfg->fn(idx);
+	if (cfg->values)
+		return cfg->values[idx];
+	return idx;
+}
+
+static int wled_configure(struct wled *wled, int version)
+{
+	struct wled_config *cfg = &wled->cfg;
+	struct device *dev = wled->dev;
+	const __be32 *prop_addr;
+	u32 size, val, c, string_len;
+	int rc, i, j;
+
+	const struct wled_u32_opts *u32_opts = NULL;
+	const struct wled_u32_opts wled3_opts[] = {
+		{
+			.name = "qcom,current-boost-limit",
+			.val_ptr = &cfg->boost_i_limit,
+			.cfg = &wled3_boost_i_limit_cfg,
+		},
+		{
+			.name = "qcom,current-limit",
+			.val_ptr = &cfg->string_i_limit,
+			.cfg = &wled3_string_i_limit_cfg,
+		},
+		{
+			.name = "qcom,ovp",
+			.val_ptr = &cfg->ovp,
+			.cfg = &wled3_ovp_cfg,
+		},
+		{
+			.name = "qcom,switching-freq",
+			.val_ptr = &cfg->switch_freq,
+			.cfg = &wled3_switch_freq_cfg,
+		},
+		{
+			.name = "qcom,num-strings",
+			.val_ptr = &cfg->num_strings,
+			.cfg = &wled3_num_strings_cfg,
+		},
+	};
+
+	const struct wled_u32_opts wled4_opts[] = {
+		{
+			.name = "qcom,current-boost-limit",
+			.val_ptr = &cfg->boost_i_limit,
+			.cfg = &wled4_boost_i_limit_cfg,
+		},
+		{
+			.name = "qcom,current-limit-microamp",
+			.val_ptr = &cfg->string_i_limit,
+			.cfg = &wled4_string_i_limit_cfg,
+		},
+		{
+			.name = "qcom,ovp-millivolt",
+			.val_ptr = &cfg->ovp,
+			.cfg = &wled4_ovp_cfg,
+		},
+		{
+			.name = "qcom,switching-freq",
+			.val_ptr = &cfg->switch_freq,
+			.cfg = &wled3_switch_freq_cfg,
+		},
+		{
+			.name = "qcom,num-strings",
+			.val_ptr = &cfg->num_strings,
+			.cfg = &wled4_num_strings_cfg,
+		},
+	};
+
+	const struct wled_bool_opts bool_opts[] = {
+		{ "qcom,cs-out", &cfg->cs_out_en, },
+		{ "qcom,ext-gen", &cfg->ext_gen, },
+		{ "qcom,cabc", &cfg->cabc, },
+		{ "qcom,external-pfet", &cfg->external_pfet, },
+		{ "qcom,auto-string-detection", &cfg->auto_detection_enabled, },
+	};
+
+	prop_addr = of_get_address(dev->of_node, 0, NULL, NULL);
+	if (!prop_addr) {
+		dev_err(wled->dev, "invalid IO resources\n");
+		return -EINVAL;
+	}
+	wled->ctrl_addr = be32_to_cpu(*prop_addr);
+
+	rc = of_property_read_string(dev->of_node, "label", &wled->name);
+	if (rc)
+		wled->name = devm_kasprintf(dev, GFP_KERNEL, "%pOFn", dev->of_node);
+
+	switch (version) {
+	case 3:
+		u32_opts = wled3_opts;
+		size = ARRAY_SIZE(wled3_opts);
+		*cfg = wled3_config_defaults;
+		wled->wled_set_brightness = wled3_set_brightness;
+		wled->max_string_count = 3;
+		wled->sink_addr = wled->ctrl_addr;
+		break;
+
+	case 4:
+		u32_opts = wled4_opts;
+		size = ARRAY_SIZE(wled4_opts);
+		*cfg = wled4_config_defaults;
+		wled->wled_set_brightness = wled4_set_brightness;
+		wled->max_string_count = 4;
+
+		prop_addr = of_get_address(dev->of_node, 1, NULL, NULL);
+		if (!prop_addr) {
+			dev_err(wled->dev, "invalid IO resources\n");
+			return -EINVAL;
+		}
+		wled->sink_addr = be32_to_cpu(*prop_addr);
+		break;
+
+	default:
+		dev_err(wled->dev, "Invalid WLED version\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < size; ++i) {
+		rc = of_property_read_u32(dev->of_node, u32_opts[i].name, &val);
+		if (rc == -EINVAL) {
+			continue;
+		} else if (rc) {
+			dev_err(dev, "error reading '%s'\n", u32_opts[i].name);
+			return rc;
+		}
+
+		c = UINT_MAX;
+		for (j = 0; c != val; j++) {
+			c = wled_values(u32_opts[i].cfg, j);
+			if (c == UINT_MAX) {
+				dev_err(dev, "invalid value for '%s'\n",
+					u32_opts[i].name);
+				return -EINVAL;
+			}
+
+			if (c == val)
+				break;
+		}
+
+		dev_dbg(dev, "'%s' = %u\n", u32_opts[i].name, c);
+		*u32_opts[i].val_ptr = j;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(bool_opts); ++i) {
+		if (of_property_read_bool(dev->of_node, bool_opts[i].name))
+			*bool_opts[i].val_ptr = true;
+	}
+
+	cfg->num_strings = cfg->num_strings + 1;
+
+	string_len = of_property_count_elems_of_size(dev->of_node,
+						     "qcom,enabled-strings",
+						     sizeof(u32));
+	if (string_len > 0)
+		of_property_read_u32_array(dev->of_node,
+						"qcom,enabled-strings",
+						wled->cfg.enabled_strings,
+						sizeof(u32));
+
+	return 0;
+}
+
+static int wled_configure_short_irq(struct wled *wled,
+				    struct platform_device *pdev)
+{
+	int rc;
+
+	if (!wled->has_short_detect)
+		return 0;
+
+	rc = regmap_update_bits(wled->regmap, wled->ctrl_addr +
+				WLED4_CTRL_REG_SHORT_PROTECT,
+				WLED4_CTRL_REG_SHORT_EN_MASK,
+				WLED4_CTRL_REG_SHORT_EN_MASK);
+	if (rc < 0)
+		return rc;
+
+	wled->short_irq = platform_get_irq_byname(pdev, "short");
+	if (wled->short_irq < 0) {
+		dev_dbg(&pdev->dev, "short irq is not used\n");
+		return 0;
+	}
+
+	rc = devm_request_threaded_irq(wled->dev, wled->short_irq,
+				       NULL, wled_short_irq_handler,
+				       IRQF_ONESHOT,
+				       "wled_short_irq", wled);
+	if (rc < 0)
+		dev_err(wled->dev, "Unable to request short_irq (err:%d)\n",
+			rc);
+
+	return rc;
+}
+
+static int wled_configure_ovp_irq(struct wled *wled,
+				  struct platform_device *pdev)
+{
+	int rc;
+	u32 val;
+
+	wled->ovp_irq = platform_get_irq_byname(pdev, "ovp");
+	if (wled->ovp_irq < 0) {
+		dev_dbg(&pdev->dev, "OVP IRQ not found - disabling automatic string detection\n");
+		return 0;
+	}
+
+	rc = devm_request_threaded_irq(wled->dev, wled->ovp_irq, NULL,
+				       wled_ovp_irq_handler, IRQF_ONESHOT,
+				       "wled_ovp_irq", wled);
+	if (rc < 0) {
+		dev_err(wled->dev, "Unable to request ovp_irq (err:%d)\n",
+			rc);
+		wled->ovp_irq = 0;
+		return 0;
+	}
+
+	rc = regmap_read(wled->regmap, wled->ctrl_addr +
+			 WLED3_CTRL_REG_MOD_EN, &val);
+	if (rc < 0)
+		return rc;
+
+	/* Keep OVP irq disabled until module is enabled */
+	if (!(val & WLED3_CTRL_REG_MOD_EN_MASK))
+		disable_irq(wled->ovp_irq);
+
+	return 0;
+}
+
+static const struct backlight_ops wled_ops = {
+	.update_status = wled_update_status,
+};
+
+static int wled_probe(struct platform_device *pdev)
+{
+	struct backlight_properties props;
+	struct backlight_device *bl;
+	struct wled *wled;
+	struct regmap *regmap;
+	int version;
+	u32 val;
+	int rc;
+
+	regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!regmap) {
+		dev_err(&pdev->dev, "Unable to get regmap\n");
+		return -EINVAL;
+	}
+
+	wled = devm_kzalloc(&pdev->dev, sizeof(*wled), GFP_KERNEL);
+	if (!wled)
+		return -ENOMEM;
+
+	wled->regmap = regmap;
+	wled->dev = &pdev->dev;
+
+	version = (uintptr_t)of_device_get_match_data(&pdev->dev);
+	if (!version) {
+		dev_err(&pdev->dev, "Unknown device version\n");
+		return -ENODEV;
+	}
+
+	mutex_init(&wled->lock);
+	rc = wled_configure(wled, version);
+	if (rc)
+		return rc;
+
+	switch (version) {
+	case 3:
+		wled->cfg.auto_detection_enabled = false;
+		rc = wled3_setup(wled);
+		if (rc) {
+			dev_err(&pdev->dev, "wled3_setup failed\n");
+			return rc;
+		}
+		break;
+
+	case 4:
+		wled->has_short_detect = true;
+		rc = wled4_setup(wled);
+		if (rc) {
+			dev_err(&pdev->dev, "wled4_setup failed\n");
+			return rc;
+		}
+		break;
+
+	default:
+		dev_err(wled->dev, "Invalid WLED version\n");
+		break;
+	}
+
+	INIT_DELAYED_WORK(&wled->ovp_work, wled_ovp_work);
+
+	rc = wled_configure_short_irq(wled, pdev);
+	if (rc < 0)
+		return rc;
+
+	rc = wled_configure_ovp_irq(wled, pdev);
+	if (rc < 0)
+		return rc;
+
+	val = WLED_DEFAULT_BRIGHTNESS;
+	of_property_read_u32(pdev->dev.of_node, "default-brightness", &val);
+
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.type = BACKLIGHT_RAW;
+	props.brightness = val;
+	props.max_brightness = WLED3_SINK_REG_BRIGHT_MAX;
+	bl = devm_backlight_device_register(&pdev->dev, wled->name,
+					    &pdev->dev, wled,
+					    &wled_ops, &props);
+	return PTR_ERR_OR_ZERO(bl);
+};
+
+static int wled_remove(struct platform_device *pdev)
+{
+	struct wled *wled = dev_get_drvdata(&pdev->dev);
+
+	mutex_destroy(&wled->lock);
+	cancel_delayed_work_sync(&wled->ovp_work);
+	disable_irq(wled->short_irq);
+	disable_irq(wled->ovp_irq);
+
+	return 0;
+}
+
+static const struct of_device_id wled_match_table[] = {
+	{ .compatible = "qcom,pm8941-wled", .data = (void *)3 },
+	{ .compatible = "qcom,pmi8998-wled", .data = (void *)4 },
+	{ .compatible = "qcom,pm660l-wled", .data = (void *)4 },
+	{}
+};
+MODULE_DEVICE_TABLE(of, wled_match_table);
+
+static struct platform_driver wled_driver = {
+	.probe = wled_probe,
+	.remove = wled_remove,
+	.driver	= {
+		.name = "qcom,wled",
+		.of_match_table	= wled_match_table,
+	},
+};
+
+module_platform_driver(wled_driver);
+
+MODULE_DESCRIPTION("Qualcomm WLED driver");
+MODULE_LICENSE("GPL v2");

drivers/video/backlight/tosa_bl.c

@@ -18,7 +18,7 @@
 
 #include <asm/mach/sharpsl_param.h>
 
-#include <mach/tosa.h>
+#include "tosa_bl.h"
 
 #define COMADJ_DEFAULT	97
 
@@ -28,6 +28,7 @@
 struct tosa_bl_data {
 	struct i2c_client *i2c;
 	struct backlight_device *bl;
+	struct gpio_desc *gpio;
 
 	int comadj;
 };
@@ -42,7 +43,7 @@ static void tosa_bl_set_backlight(struct tosa_bl_data *data, int brightness)
 	i2c_smbus_write_byte_data(data->i2c, DAC_CH2, (u8)(brightness & 0xff));
 
 	/* SetBacklightVR */
-	gpio_set_value(TOSA_GPIO_BL_C20MA, brightness & 0x100);
+	gpiod_set_value(data->gpio, brightness & 0x100);
 
 	tosa_bl_enable(spi, brightness);
 }
@@ -87,9 +88,8 @@ static int tosa_bl_probe(struct i2c_client *client,
 		return -ENOMEM;
 
 	data->comadj = sharpsl_param.comadj == -1 ? COMADJ_DEFAULT : sharpsl_param.comadj;
-
-	ret = devm_gpio_request_one(&client->dev, TOSA_GPIO_BL_C20MA,
-				GPIOF_OUT_INIT_LOW, "backlight");
+	data->gpio = devm_gpiod_get(&client->dev, "backlight", GPIOD_OUT_LOW);
+	ret = PTR_ERR_OR_ZERO(data->gpio);
 	if (ret) {
 		dev_dbg(&data->bl->dev, "Unable to request gpio!\n");
 		return ret;

drivers/video/backlight/tosa_bl.h

+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _TOSA_BL_H
+#define _TOSA_BL_H
+
+struct spi_device;
+extern int tosa_bl_enable(struct spi_device *spi, int enable);
+
+#endif

drivers/video/backlight/tosa_lcd.c

@@ -19,7 +19,7 @@
 
 #include <asm/mach/sharpsl_param.h>
 
-#include <mach/tosa.h>
+#include "tosa_bl.h"
 
 #define POWER_IS_ON(pwr)	((pwr) <= FB_BLANK_NORMAL)
 
@@ -28,12 +28,26 @@
 #define TG_REG0_UD	0x0004
 #define TG_REG0_LR	0x0008
 
+/*
+ * Timing Generator
+ */
+#define TG_PNLCTL 	0x00
+#define TG_TPOSCTL 	0x01
+#define TG_DUTYCTL 	0x02
+#define TG_GPOSR 	0x03
+#define TG_GPODR1 	0x04
+#define TG_GPODR2 	0x05
+#define TG_PINICTL 	0x06
+#define TG_HPOSCTL 	0x07
+
+
 #define	DAC_BASE	0x4e
 
 struct tosa_lcd_data {
 	struct spi_device *spi;
 	struct lcd_device *lcd;
 	struct i2c_client *i2c;
+	struct gpio_desc *gpiod_tg;
 
 	int lcd_power;
 	bool is_vga;
@@ -66,7 +80,7 @@ EXPORT_SYMBOL(tosa_bl_enable);
 static void tosa_lcd_tg_init(struct tosa_lcd_data *data)
 {
 	/* TG on */
-	gpio_set_value(TOSA_GPIO_TG_ON, 0);
+	gpiod_set_value(data->gpiod_tg, 0);
 
 	mdelay(60);
 
@@ -100,6 +114,7 @@ static void tosa_lcd_tg_on(struct tosa_lcd_data *data)
 		 */
 		struct i2c_adapter *adap = i2c_get_adapter(0);
 		struct i2c_board_info info = {
+			.dev_name = "tosa-bl",
 			.type	= "tosa-bl",
 			.addr	= DAC_BASE,
 			.platform_data = data->spi,
@@ -121,7 +136,7 @@ static void tosa_lcd_tg_off(struct tosa_lcd_data *data)
 	mdelay(50);
 
 	/* TG Off */
-	gpio_set_value(TOSA_GPIO_TG_ON, 1);
+	gpiod_set_value(data->gpiod_tg, 1);
 	mdelay(100);
 }
 
@@ -191,10 +206,9 @@ static int tosa_lcd_probe(struct spi_device *spi)
 	data->spi = spi;
 	spi_set_drvdata(spi, data);
 
-	ret = devm_gpio_request_one(&spi->dev, TOSA_GPIO_TG_ON,
-				GPIOF_OUT_INIT_LOW, "tg #pwr");
-	if (ret < 0)
-		return ret;
+	data->gpiod_tg = devm_gpiod_get(&spi->dev, "tg #pwr", GPIOD_OUT_LOW);
+	if (IS_ERR(data->gpiod_tg))
+		return PTR_ERR(data->gpiod_tg);
 
 	mdelay(60);
 

include/linux/platform_data/gpio_backlight.h

@@ -9,9 +9,6 @@ struct device;
 
 struct gpio_backlight_platform_data {
 	struct device *fbdev;
-	int gpio;
-	int def_value;
-	const char *name;
 };
 
 #endif