Commit 394671e7 authored by Andy Shevchenko's avatar Andy Shevchenko Committed by Samuel Ortiz

NFC: st21nfca: Add GPIO ACPI mapping table

In order to make GPIO ACPI library stricter prepare users of
gpiod_get_index() to correctly behave when there no mapping is
provided by firmware.

Here we add explicit mapping between _CRS GpioIo() resources and
their names used in the driver.
Signed-off-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: default avatarSamuel Ortiz <sameo@linux.intel.com>
parent 99f2064e
......@@ -501,14 +501,25 @@ static struct nfc_phy_ops i2c_phy_ops = {
.disable = st21nfca_hci_i2c_disable,
};
static const struct acpi_gpio_params enable_gpios = { 1, 0, false };
static const struct acpi_gpio_mapping acpi_st21nfca_gpios[] = {
{ "enable-gpios", &enable_gpios, 1 },
{},
};
static int st21nfca_hci_i2c_acpi_request_resources(struct i2c_client *client)
{
struct st21nfca_i2c_phy *phy = i2c_get_clientdata(client);
struct device *dev = &client->dev;
int ret;
ret = devm_acpi_dev_add_driver_gpios(dev, acpi_st21nfca_gpios);
if (ret)
return ret;
/* Get EN GPIO from ACPI */
phy->gpiod_ena = devm_gpiod_get_index(dev, ST21NFCA_GPIO_NAME_EN, 1,
GPIOD_OUT_LOW);
phy->gpiod_ena = devm_gpiod_get(dev, ST21NFCA_GPIO_NAME_EN, GPIOD_OUT_LOW);
if (IS_ERR(phy->gpiod_ena)) {
nfc_err(dev, "Unable to get ENABLE GPIO\n");
return PTR_ERR(phy->gpiod_ena);
......@@ -523,8 +534,7 @@ static int st21nfca_hci_i2c_of_request_resources(struct i2c_client *client)
struct device *dev = &client->dev;
/* Get GPIO from device tree */
phy->gpiod_ena = devm_gpiod_get_index(dev, ST21NFCA_GPIO_NAME_EN, 0,
GPIOD_OUT_HIGH);
phy->gpiod_ena = devm_gpiod_get(dev, ST21NFCA_GPIO_NAME_EN, GPIOD_OUT_HIGH);
if (IS_ERR(phy->gpiod_ena)) {
nfc_err(dev, "Failed to request enable pin\n");
return PTR_ERR(phy->gpiod_ena);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment