Commit 3a0eb192 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'for-5.7/libata-2020-03-29' of git://git.kernel.dk/linux-block

Pull libata updates from Jens Axboe:

 - Series from Bart, making the libata code smaller on PATA only setups.
   This is useful for smaller/embedded use cases, and will help us move
   some of those off drivers/ide.

 - Kill unused BPRINTK() (Hannes)

 - Add various Comet Lake ahci PCI ids (Kai-Heng, Mika)

 - Fix for a double scsi_host_put() in error handling (John)

 - Use scnprintf (Takashi)

 - Assign OF node to the SCSI device (Linus Walleij)

* tag 'for-5.7/libata-2020-03-29' of git://git.kernel.dk/linux-block: (36 commits)
  ata: make "libata.force" kernel parameter optional
  ata: move ata_eh_analyze_ncq_error() & co. to libata-sata.c
  ata: start separating SATA specific code from libata-eh.c
  ata: move ata_sas_*() to libata-sata.c
  ata: start separating SATA specific code from libata-scsi.c
  ata: move sata_deb_timing_*() to libata-sata.c
  ata: move ata_qc_complete_multiple() to libata-sata.c
  ata: move sata_link_hardreset() to libata-sata.c
  ata: move sata_link_{debounce,resume}() to libata-sata.c
  ata: move *sata_set_spd*() to libata-sata.c
  ata: move sata_scr_*() to libata-sata.c
  ata: start separating SATA specific code from libata-core.c
  ata: let compiler optimize out ata_eh_set_lpm() on non-SATA hosts
  ata: let compiler optimize out ata_dev_config_ncq() on non-SATA hosts
  ata: add CONFIG_SATA_HOST=n version of ata_ncq_enabled()
  ata: separate PATA timings code from libata-core.c
  ata: fix CodingStyle issues in PATA timings code
  ata: remove EXPORT_SYMBOL_GPL()s not used by modules
  ata: move EXPORT_SYMBOL_GPL()s close to exported code
  ata: optimize ata_scsi_rbuf[] size
  ...
parents c03cb664 bf89b0bf
This diff is collapsed.
......@@ -123,7 +123,9 @@ obj-$(CONFIG_PATA_LEGACY) += pata_legacy.o
libata-y := libata-core.o libata-scsi.o libata-eh.o \
libata-transport.o libata-trace.o
libata-$(CONFIG_SATA_HOST) += libata-sata.o
libata-$(CONFIG_ATA_SFF) += libata-sff.o
libata-$(CONFIG_SATA_PMP) += libata-pmp.o
libata-$(CONFIG_ATA_ACPI) += libata-acpi.o
libata-$(CONFIG_SATA_ZPODD) += libata-zpodd.o
libata-$(CONFIG_PATA_TIMINGS) += libata-pata-timings.o
......@@ -40,6 +40,7 @@
enum {
AHCI_PCI_BAR_STA2X11 = 0,
AHCI_PCI_BAR_CAVIUM = 0,
AHCI_PCI_BAR_LOONGSON = 0,
AHCI_PCI_BAR_ENMOTUS = 2,
AHCI_PCI_BAR_CAVIUM_GEN5 = 4,
AHCI_PCI_BAR_STANDARD = 5,
......@@ -245,6 +246,7 @@ static const struct ata_port_info ahci_port_info[] = {
static const struct pci_device_id ahci_pci_tbl[] = {
/* Intel */
{ PCI_VDEVICE(INTEL, 0x06d6), board_ahci }, /* Comet Lake PCH-H RAID */
{ PCI_VDEVICE(INTEL, 0x2652), board_ahci }, /* ICH6 */
{ PCI_VDEVICE(INTEL, 0x2653), board_ahci }, /* ICH6M */
{ PCI_VDEVICE(INTEL, 0x27c1), board_ahci }, /* ICH7 */
......@@ -401,6 +403,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, 0xa252), board_ahci }, /* Lewisburg RAID*/
{ PCI_VDEVICE(INTEL, 0xa256), board_ahci }, /* Lewisburg RAID*/
{ PCI_VDEVICE(INTEL, 0xa356), board_ahci }, /* Cannon Lake PCH-H RAID */
{ PCI_VDEVICE(INTEL, 0x06d7), board_ahci }, /* Comet Lake-H RAID */
{ PCI_VDEVICE(INTEL, 0xa386), board_ahci }, /* Comet Lake PCH-V RAID */
{ PCI_VDEVICE(INTEL, 0x0f22), board_ahci_mobile }, /* Bay Trail AHCI */
{ PCI_VDEVICE(INTEL, 0x0f23), board_ahci_mobile }, /* Bay Trail AHCI */
{ PCI_VDEVICE(INTEL, 0x22a3), board_ahci_mobile }, /* Cherry Tr. AHCI */
......@@ -589,6 +593,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
/* Enmotus */
{ PCI_DEVICE(0x1c44, 0x8000), board_ahci },
/* Loongson */
{ PCI_VDEVICE(LOONGSON, 0x7a08), board_ahci },
/* Generic, PCI class code for AHCI */
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },
......@@ -1680,6 +1687,9 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
ahci_pci_bar = AHCI_PCI_BAR_CAVIUM;
if (pdev->device == 0xa084)
ahci_pci_bar = AHCI_PCI_BAR_CAVIUM_GEN5;
} else if (pdev->vendor == PCI_VENDOR_ID_LOONGSON) {
if (pdev->device == 0x7a08)
ahci_pci_bar = AHCI_PCI_BAR_LOONGSON;
}
/* acquire resources */
......
This diff is collapsed.
......@@ -2,10 +2,6 @@
/*
* libata-eh.c - libata error handling
*
* Maintained by: Tejun Heo <tj@kernel.org>
* Please ALWAYS copy linux-ide@vger.kernel.org
* on emails.
*
* Copyright 2006 Tejun Heo <htejun@gmail.com>
*
* libata documentation is available via 'make {ps|pdf}docs',
......@@ -184,6 +180,7 @@ void __ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...)
__ata_ehi_pushv_desc(ehi, fmt, args);
va_end(args);
}
EXPORT_SYMBOL_GPL(__ata_ehi_push_desc);
/**
* ata_ehi_push_desc - push error description with separator
......@@ -207,6 +204,7 @@ void ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...)
__ata_ehi_pushv_desc(ehi, fmt, args);
va_end(args);
}
EXPORT_SYMBOL_GPL(ata_ehi_push_desc);
/**
* ata_ehi_clear_desc - clean error description
......@@ -222,6 +220,7 @@ void ata_ehi_clear_desc(struct ata_eh_info *ehi)
ehi->desc[0] = '\0';
ehi->desc_len = 0;
}
EXPORT_SYMBOL_GPL(ata_ehi_clear_desc);
/**
* ata_port_desc - append port description
......@@ -249,9 +248,9 @@ void ata_port_desc(struct ata_port *ap, const char *fmt, ...)
__ata_ehi_pushv_desc(&ap->link.eh_info, fmt, args);
va_end(args);
}
EXPORT_SYMBOL_GPL(ata_port_desc);
#ifdef CONFIG_PCI
/**
* ata_port_pbar_desc - append PCI BAR description
* @ap: target ATA port
......@@ -288,7 +287,7 @@ void ata_port_pbar_desc(struct ata_port *ap, int bar, ssize_t offset,
ata_port_desc(ap, "%s 0x%llx", name,
start + (unsigned long long)offset);
}
EXPORT_SYMBOL_GPL(ata_port_pbar_desc);
#endif /* CONFIG_PCI */
static int ata_lookup_timeout_table(u8 cmd)
......@@ -973,6 +972,7 @@ void ata_port_schedule_eh(struct ata_port *ap)
/* see: ata_std_sched_eh, unless you know better */
ap->ops->sched_eh(ap);
}
EXPORT_SYMBOL_GPL(ata_port_schedule_eh);
static int ata_do_link_abort(struct ata_port *ap, struct ata_link *link)
{
......@@ -1015,6 +1015,7 @@ int ata_link_abort(struct ata_link *link)
{
return ata_do_link_abort(link->ap, link);
}
EXPORT_SYMBOL_GPL(ata_link_abort);
/**
* ata_port_abort - abort all qc's on the port
......@@ -1032,6 +1033,7 @@ int ata_port_abort(struct ata_port *ap)
{
return ata_do_link_abort(ap, NULL);
}
EXPORT_SYMBOL_GPL(ata_port_abort);
/**
* __ata_port_freeze - freeze port
......@@ -1088,79 +1090,7 @@ int ata_port_freeze(struct ata_port *ap)
return nr_aborted;
}
/**
* sata_async_notification - SATA async notification handler
* @ap: ATA port where async notification is received
*
* Handler to be called when async notification via SDB FIS is
* received. This function schedules EH if necessary.
*
* LOCKING:
* spin_lock_irqsave(host lock)
*
* RETURNS:
* 1 if EH is scheduled, 0 otherwise.
*/
int sata_async_notification(struct ata_port *ap)
{
u32 sntf;
int rc;
if (!(ap->flags & ATA_FLAG_AN))
return 0;
rc = sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf);
if (rc == 0)
sata_scr_write(&ap->link, SCR_NOTIFICATION, sntf);
if (!sata_pmp_attached(ap) || rc) {
/* PMP is not attached or SNTF is not available */
if (!sata_pmp_attached(ap)) {
/* PMP is not attached. Check whether ATAPI
* AN is configured. If so, notify media
* change.
*/
struct ata_device *dev = ap->link.device;
if ((dev->class == ATA_DEV_ATAPI) &&
(dev->flags & ATA_DFLAG_AN))
ata_scsi_media_change_notify(dev);
return 0;
} else {
/* PMP is attached but SNTF is not available.
* ATAPI async media change notification is
* not used. The PMP must be reporting PHY
* status change, schedule EH.
*/
ata_port_schedule_eh(ap);
return 1;
}
} else {
/* PMP is attached and SNTF is available */
struct ata_link *link;
/* check and notify ATAPI AN */
ata_for_each_link(link, ap, EDGE) {
if (!(sntf & (1 << link->pmp)))
continue;
if ((link->device->class == ATA_DEV_ATAPI) &&
(link->device->flags & ATA_DFLAG_AN))
ata_scsi_media_change_notify(link->device);
}
/* If PMP is reporting that PHY status of some
* downstream ports has changed, schedule EH.
*/
if (sntf & (1 << SATA_PMP_CTRL_PORT)) {
ata_port_schedule_eh(ap);
return 1;
}
return 0;
}
}
EXPORT_SYMBOL_GPL(ata_port_freeze);
/**
* ata_eh_freeze_port - EH helper to freeze port
......@@ -1182,6 +1112,7 @@ void ata_eh_freeze_port(struct ata_port *ap)
__ata_port_freeze(ap);
spin_unlock_irqrestore(ap->lock, flags);
}
EXPORT_SYMBOL_GPL(ata_eh_freeze_port);
/**
* ata_port_thaw_port - EH helper to thaw port
......@@ -1289,6 +1220,7 @@ void ata_dev_disable(struct ata_device *dev)
*/
ata_ering_clear(&dev->ering);
}
EXPORT_SYMBOL_GPL(ata_dev_disable);
/**
* ata_eh_detach_dev - detach ATA device
......@@ -1419,62 +1351,6 @@ static const char *ata_err_string(unsigned int err_mask)
return "unknown error";
}
/**
* ata_eh_read_log_10h - Read log page 10h for NCQ error details
* @dev: Device to read log page 10h from
* @tag: Resulting tag of the failed command
* @tf: Resulting taskfile registers of the failed command
*
* Read log page 10h to obtain NCQ error details and clear error
* condition.
*
* LOCKING:
* Kernel thread context (may sleep).
*
* RETURNS:
* 0 on success, -errno otherwise.
*/
static int ata_eh_read_log_10h(struct ata_device *dev,
int *tag, struct ata_taskfile *tf)
{
u8 *buf = dev->link->ap->sector_buf;
unsigned int err_mask;
u8 csum;
int i;
err_mask = ata_read_log_page(dev, ATA_LOG_SATA_NCQ, 0, buf, 1);
if (err_mask)
return -EIO;
csum = 0;
for (i = 0; i < ATA_SECT_SIZE; i++)
csum += buf[i];
if (csum)
ata_dev_warn(dev, "invalid checksum 0x%x on log page 10h\n",
csum);
if (buf[0] & 0x80)
return -ENOENT;
*tag = buf[0] & 0x1f;
tf->command = buf[2];
tf->feature = buf[3];
tf->lbal = buf[4];
tf->lbam = buf[5];
tf->lbah = buf[6];
tf->device = buf[7];
tf->hob_lbal = buf[8];
tf->hob_lbam = buf[9];
tf->hob_lbah = buf[10];
tf->nsect = buf[12];
tf->hob_nsect = buf[13];
if (dev->class == ATA_DEV_ZAC && ata_id_has_ncq_autosense(dev->id))
tf->auxiliary = buf[14] << 16 | buf[15] << 8 | buf[16];
return 0;
}
/**
* atapi_eh_tur - perform ATAPI TEST_UNIT_READY
* @dev: target ATAPI device
......@@ -1658,80 +1534,6 @@ static void ata_eh_analyze_serror(struct ata_link *link)
ehc->i.action |= action;
}
/**
* ata_eh_analyze_ncq_error - analyze NCQ error
* @link: ATA link to analyze NCQ error for
*
* Read log page 10h, determine the offending qc and acquire
* error status TF. For NCQ device errors, all LLDDs have to do
* is setting AC_ERR_DEV in ehi->err_mask. This function takes
* care of the rest.
*
* LOCKING:
* Kernel thread context (may sleep).
*/
void ata_eh_analyze_ncq_error(struct ata_link *link)
{
struct ata_port *ap = link->ap;
struct ata_eh_context *ehc = &link->eh_context;
struct ata_device *dev = link->device;
struct ata_queued_cmd *qc;
struct ata_taskfile tf;
int tag, rc;
/* if frozen, we can't do much */
if (ap->pflags & ATA_PFLAG_FROZEN)
return;
/* is it NCQ device error? */
if (!link->sactive || !(ehc->i.err_mask & AC_ERR_DEV))
return;
/* has LLDD analyzed already? */
ata_qc_for_each_raw(ap, qc, tag) {
if (!(qc->flags & ATA_QCFLAG_FAILED))
continue;
if (qc->err_mask)
return;
}
/* okay, this error is ours */
memset(&tf, 0, sizeof(tf));
rc = ata_eh_read_log_10h(dev, &tag, &tf);
if (rc) {
ata_link_err(link, "failed to read log page 10h (errno=%d)\n",
rc);
return;
}
if (!(link->sactive & (1 << tag))) {
ata_link_err(link, "log page 10h reported inactive tag %d\n",
tag);
return;
}
/* we've got the perpetrator, condemn it */
qc = __ata_qc_from_tag(ap, tag);
memcpy(&qc->result_tf, &tf, sizeof(tf));
qc->result_tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
qc->err_mask |= AC_ERR_DEV | AC_ERR_NCQ;
if (dev->class == ATA_DEV_ZAC &&
((qc->result_tf.command & ATA_SENSE) || qc->result_tf.auxiliary)) {
char sense_key, asc, ascq;
sense_key = (qc->result_tf.auxiliary >> 16) & 0xff;
asc = (qc->result_tf.auxiliary >> 8) & 0xff;
ascq = qc->result_tf.auxiliary & 0xff;
ata_scsi_set_sense(dev, qc->scsicmd, sense_key, asc, ascq);
ata_scsi_set_sense_information(dev, qc->scsicmd,
&qc->result_tf);
qc->flags |= ATA_QCFLAG_SENSE_VALID;
}
ehc->i.err_mask &= ~AC_ERR_DEV;
}
/**
* ata_eh_analyze_tf - analyze taskfile of a failed qc
* @qc: qc to analyze
......@@ -3436,7 +3238,8 @@ static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
int rc;
/* if the link or host doesn't do LPM, noop */
if ((link->flags & ATA_LFLAG_NO_LPM) || (ap && !ap->ops->set_lpm))
if (!IS_ENABLED(CONFIG_SATA_HOST) ||
(link->flags & ATA_LFLAG_NO_LPM) || (ap && !ap->ops->set_lpm))
return 0;
/*
......@@ -4052,6 +3855,7 @@ void ata_std_error_handler(struct ata_port *ap)
ata_do_eh(ap, ops->prereset, ops->softreset, hardreset, ops->postreset);
}
EXPORT_SYMBOL_GPL(ata_std_error_handler);
#ifdef CONFIG_PM
/**
......
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Helper library for PATA timings
*
* Copyright 2003-2004 Red Hat, Inc. All rights reserved.
* Copyright 2003-2004 Jeff Garzik
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/libata.h>
/*
* This mode timing computation functionality is ported over from
* drivers/ide/ide-timing.h and was originally written by Vojtech Pavlik
*/
/*
* PIO 0-4, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds).
* These were taken from ATA/ATAPI-6 standard, rev 0a, except
* for UDMA6, which is currently supported only by Maxtor drives.
*
* For PIO 5/6 MWDMA 3/4 see the CFA specification 3.0.
*/
static const struct ata_timing ata_timing[] = {
/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 0, 960, 0 }, */
{ XFER_PIO_0, 70, 290, 240, 600, 165, 150, 0, 600, 0 },
{ XFER_PIO_1, 50, 290, 93, 383, 125, 100, 0, 383, 0 },
{ XFER_PIO_2, 30, 290, 40, 330, 100, 90, 0, 240, 0 },
{ XFER_PIO_3, 30, 80, 70, 180, 80, 70, 0, 180, 0 },
{ XFER_PIO_4, 25, 70, 25, 120, 70, 25, 0, 120, 0 },
{ XFER_PIO_5, 15, 65, 25, 100, 65, 25, 0, 100, 0 },
{ XFER_PIO_6, 10, 55, 20, 80, 55, 20, 0, 80, 0 },
{ XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 50, 960, 0 },
{ XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 30, 480, 0 },
{ XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 20, 240, 0 },
{ XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 20, 480, 0 },
{ XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 5, 150, 0 },
{ XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 5, 120, 0 },
{ XFER_MW_DMA_3, 25, 0, 0, 0, 65, 25, 5, 100, 0 },
{ XFER_MW_DMA_4, 25, 0, 0, 0, 55, 20, 5, 80, 0 },
/* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 0, 150 }, */
{ XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 0, 120 },
{ XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 0, 80 },
{ XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 0, 60 },
{ XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 0, 45 },
{ XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 0, 30 },
{ XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 0, 20 },
{ XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 0, 15 },
{ 0xFF }
};
#define ENOUGH(v, unit) (((v)-1)/(unit)+1)
#define EZ(v, unit) ((v)?ENOUGH(((v) * 1000), unit):0)
static void ata_timing_quantize(const struct ata_timing *t,
struct ata_timing *q, int T, int UT)
{
q->setup = EZ(t->setup, T);
q->act8b = EZ(t->act8b, T);
q->rec8b = EZ(t->rec8b, T);
q->cyc8b = EZ(t->cyc8b, T);
q->active = EZ(t->active, T);
q->recover = EZ(t->recover, T);
q->dmack_hold = EZ(t->dmack_hold, T);
q->cycle = EZ(t->cycle, T);
q->udma = EZ(t->udma, UT);
}
void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b,
struct ata_timing *m, unsigned int what)
{
if (what & ATA_TIMING_SETUP)
m->setup = max(a->setup, b->setup);
if (what & ATA_TIMING_ACT8B)
m->act8b = max(a->act8b, b->act8b);
if (what & ATA_TIMING_REC8B)
m->rec8b = max(a->rec8b, b->rec8b);
if (what & ATA_TIMING_CYC8B)
m->cyc8b = max(a->cyc8b, b->cyc8b);
if (what & ATA_TIMING_ACTIVE)
m->active = max(a->active, b->active);
if (what & ATA_TIMING_RECOVER)
m->recover = max(a->recover, b->recover);
if (what & ATA_TIMING_DMACK_HOLD)
m->dmack_hold = max(a->dmack_hold, b->dmack_hold);
if (what & ATA_TIMING_CYCLE)
m->cycle = max(a->cycle, b->cycle);
if (what & ATA_TIMING_UDMA)
m->udma = max(a->udma, b->udma);
}
EXPORT_SYMBOL_GPL(ata_timing_merge);
const struct ata_timing *ata_timing_find_mode(u8 xfer_mode)
{
const struct ata_timing *t = ata_timing;
while (xfer_mode > t->mode)
t++;
if (xfer_mode == t->mode)
return t;
WARN_ONCE(true, "%s: unable to find timing for xfer_mode 0x%x\n",
__func__, xfer_mode);
return NULL;
}
EXPORT_SYMBOL_GPL(ata_timing_find_mode);
int ata_timing_compute(struct ata_device *adev, unsigned short speed,
struct ata_timing *t, int T, int UT)
{
const u16 *id = adev->id;
const struct ata_timing *s;
struct ata_timing p;
/*
* Find the mode.
*/
s = ata_timing_find_mode(speed);
if (!s)
return -EINVAL;
memcpy(t, s, sizeof(*s));
/*
* If the drive is an EIDE drive, it can tell us it needs extended
* PIO/MW_DMA cycle timing.
*/
if (id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */
memset(&p, 0, sizeof(p));
if (speed >= XFER_PIO_0 && speed < XFER_SW_DMA_0) {
if (speed <= XFER_PIO_2)
p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO];
else if ((speed <= XFER_PIO_4) ||
(speed == XFER_PIO_5 && !ata_id_is_cfa(id)))
p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO_IORDY];
} else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
p.cycle = id[ATA_ID_EIDE_DMA_MIN];
ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B);
}
/*
* Convert the timing to bus clock counts.
*/
ata_timing_quantize(t, t, T, UT);
/*
* Even in DMA/UDMA modes we still use PIO access for IDENTIFY,
* S.M.A.R.T * and some other commands. We have to ensure that the
* DMA cycle timing is slower/equal than the fastest PIO timing.
*/
if (speed > XFER_PIO_6) {
ata_timing_compute(adev, adev->pio_mode, &p, T, UT);
ata_timing_merge(&p, t, t, ATA_TIMING_ALL);
}
/*
* Lengthen active & recovery time so that cycle time is correct.
*/
if (t->act8b + t->rec8b < t->cyc8b) {
t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2;
t->rec8b = t->cyc8b - t->act8b;
}
if (t->active + t->recover < t->cycle) {
t->active += (t->cycle - (t->active + t->recover)) / 2;
t->recover = t->cycle - t->active;
}
/*
* In a few cases quantisation may produce enough errors to
* leave t->cycle too low for the sum of active and recovery
* if so we must correct this.
*/
if (t->active + t->recover > t->cycle)
t->cycle = t->active + t->recover;
return 0;
}
EXPORT_SYMBOL_GPL(ata_timing_compute);
This diff is collapsed.
This diff is collapsed.
......@@ -2,10 +2,6 @@
/*
* libata-sff.c - helper library for PCI IDE BMDMA
*
* Maintained by: Tejun Heo <tj@kernel.org>
* Please ALWAYS copy linux-ide@vger.kernel.org
* on emails.
*
* Copyright 2003-2006 Red Hat, Inc. All rights reserved.
* Copyright 2003-2006 Jeff Garzik
*
......
......@@ -208,7 +208,7 @@ show_ata_port_##name(struct device *dev, \
{ \
struct ata_port *ap = transport_class_to_port(dev); \
\
return snprintf(buf, 20, format_string, cast ap->field); \
return scnprintf(buf, 20, format_string, cast ap->field); \
}
#define ata_port_simple_attr(field, name, format_string, type) \
......@@ -479,7 +479,7 @@ show_ata_dev_##field(struct device *dev, \
{ \
struct ata_device *ata_dev = transport_class_to_dev(dev); \
\
return snprintf(buf, 20, format_string, cast ata_dev->field); \
return scnprintf(buf, 20, format_string, cast ata_dev->field); \
}
#define ata_dev_simple_attr(field, format_string, type) \
......@@ -533,7 +533,7 @@ show_ata_dev_id(struct device *dev,
if (ata_dev->class == ATA_DEV_PMP)
return 0;
for(i=0;i<ATA_ID_WORDS;i++) {
written += snprintf(buf+written, 20, "%04x%c",
written += scnprintf(buf+written, 20, "%04x%c",
ata_dev->id[i],
((i+1) & 7) ? ' ' : '\n');
}
......@@ -552,7 +552,7 @@ show_ata_dev_gscr(struct device *dev,
if (ata_dev->class != ATA_DEV_PMP)
return 0;
for(i=0;i<SATA_PMP_GSCR_DWORDS;i++) {
written += snprintf(buf+written, 20, "%08x%c",
written += scnprintf(buf+written, 20, "%08x%c",
ata_dev->gscr[i],
((i+1) & 3) ? ' ' : '\n');
}
......@@ -581,7 +581,7 @@ show_ata_dev_trim(struct device *dev,
else
mode = "unqueued";
return snprintf(buf, 20, "%s\n", mode);
return scnprintf(buf, 20, "%s\n", mode);
}
static DEVICE_ATTR(trim, S_IRUGO, show_ata_dev_trim, NULL);
......
......@@ -37,7 +37,11 @@ extern int libata_noacpi;
extern int libata_allow_tpm;
extern const struct device_type ata_port_type;
extern struct ata_link *ata_dev_phys_link(struct ata_device *dev);
#ifdef CONFIG_ATA_FORCE
extern void ata_force_cbl(struct ata_port *ap);
#else
static inline void ata_force_cbl(struct ata_port *ap) { }
#endif
extern u64 ata_tf_to_lba(const struct ata_taskfile *tf);
extern u64 ata_tf_to_lba48(const struct ata_taskfile *tf);
extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag);
......@@ -87,6 +91,18 @@ extern unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
#define to_ata_port(d) container_of(d, struct ata_port, tdev)
/* libata-sata.c */
#ifdef CONFIG_SATA_HOST
int ata_sas_allocate_tag(struct ata_port *ap);
void ata_sas_free_tag(unsigned int tag, struct ata_port *ap);
#else
static inline int ata_sas_allocate_tag(struct ata_port *ap)
{
return -EOPNOTSUPP;
}
static inline void ata_sas_free_tag(unsigned int tag, struct ata_port *ap) { }
#endif
/* libata-acpi.c */
#ifdef CONFIG_ATA_ACPI
extern unsigned int ata_acpi_gtf_filter;
......@@ -112,6 +128,8 @@ static inline void ata_acpi_bind_dev(struct ata_device *dev) {}
#endif
/* libata-scsi.c */
extern struct ata_device *ata_scsi_find_dev(struct ata_port *ap,
const struct scsi_device *scsidev);
extern int ata_scsi_add_hosts(struct ata_host *host,
struct scsi_host_template *sht);
extern void ata_scsi_scan_host(struct ata_port *ap, int sync);
......@@ -128,9 +146,10 @@ extern void ata_scsi_dev_rescan(struct work_struct *work);
extern int ata_bus_probe(struct ata_port *ap);
extern int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel,
unsigned int id, u64 lun);
int ata_sas_allocate_tag(struct ata_port *ap);
void ata_sas_free_tag(unsigned int tag, struct ata_port *ap);
void ata_scsi_sdev_config(struct scsi_device *sdev);
int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev);
void ata_scsi_dump_cdb(struct ata_port *ap, struct scsi_cmnd *cmd);
int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, struct ata_device *dev);
/* libata-eh.c */
extern unsigned long ata_internal_cmd_timeout(struct ata_device *dev, u8 cmd);
......
......@@ -157,7 +157,6 @@ static int pdc_sata_hardreset(struct ata_link *link, unsigned int *class,
static void pdc_error_handler(struct ata_port *ap);
static void pdc_post_internal_cmd(struct ata_queued_cmd *qc);
static int pdc_pata_cable_detect(struct ata_port *ap);
static int pdc_sata_cable_detect(struct ata_port *ap);
static struct scsi_host_template pdc_ata_sht = {
ATA_BASE_SHT(DRV_NAME),
......@@ -183,7 +182,7 @@ static const struct ata_port_operations pdc_common_ops = {
static struct ata_port_operations pdc_sata_ops = {
.inherits = &pdc_common_ops,
.cable_detect = pdc_sata_cable_detect,
.cable_detect = ata_cable_sata,
.freeze = pdc_sata_freeze,
.thaw = pdc_sata_thaw,
.scr_read = pdc_sata_scr_read,
......@@ -459,11 +458,6 @@ static int pdc_pata_cable_detect(struct ata_port *ap)
return ATA_CBL_PATA80;
}
static int pdc_sata_cable_detect(struct ata_port *ap)
{
return ATA_CBL_SATA;
}
static int pdc_sata_scr_read(struct ata_link *link,
unsigned int sc_reg, u32 *val)
{
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment