bnx2x: Removing CL73 code

This code is disabled, so removing it to avoid confusion
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/bnx2x_link.c

@@ -29,7 +29,6 @@
 #include "bnx2x.h"
 
 /********************************************************/
-#define SUPPORT_CL73 0 /* Currently no */
 #define ETH_HLEN			14
 #define ETH_OVREHEAD		(ETH_HLEN + 8)/* 8 for CRC + VLAN*/
 #define ETH_MIN_PACKET_SIZE		60
@@ -1208,62 +1207,9 @@ static void bnx2x_set_autoneg(struct link_params *params,
 			      MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL,
 			      reg_val);
 
-	/* Enable Clause 73 Aneg */
-	if ((vars->line_speed == SPEED_AUTO_NEG) &&
-	    (SUPPORT_CL73)) {
-		/* Enable BAM Station Manager */
-
-		CL45_WR_OVER_CL22(bp, params->port,
-				      params->phy_addr,
-				      MDIO_REG_BANK_CL73_USERB0,
-				      MDIO_CL73_USERB0_CL73_BAM_CTRL1,
-				   (MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN |
-			MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN |
-			MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN));
-
-		/* Merge CL73 and CL37 aneg resolution */
-		CL45_RD_OVER_CL22(bp, params->port,
-				      params->phy_addr,
-				      MDIO_REG_BANK_CL73_USERB0,
-				      MDIO_CL73_USERB0_CL73_BAM_CTRL3,
-				      &reg_val);
-
-		CL45_WR_OVER_CL22(bp, params->port,
-				      params->phy_addr,
-			MDIO_REG_BANK_CL73_USERB0,
-			MDIO_CL73_USERB0_CL73_BAM_CTRL3,
-			(reg_val |
-			MDIO_CL73_USERB0_CL73_BAM_CTRL3_USE_CL73_HCD_MR));
-
-		/* Set the CL73 AN speed */
-
-		CL45_RD_OVER_CL22(bp, params->port,
-				      params->phy_addr,
-				      MDIO_REG_BANK_CL73_IEEEB1,
-				      MDIO_CL73_IEEEB1_AN_ADV2, &reg_val);
-		/* In the SerDes we support only the 1G.
-		   In the XGXS we support the 10G KX4
-		   but we currently do not support the KR */
-		if (vars->phy_flags & PHY_XGXS_FLAG) {
-			DP(NETIF_MSG_LINK, "XGXS\n");
-			/* 10G KX4 */
-			reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4;
-		} else {
-			DP(NETIF_MSG_LINK, "SerDes\n");
-			/* 1000M KX */
-			reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX;
-		}
-		CL45_WR_OVER_CL22(bp, params->port,
-				      params->phy_addr,
-				      MDIO_REG_BANK_CL73_IEEEB1,
-				      MDIO_CL73_IEEEB1_AN_ADV2, reg_val);
-
-		/* CL73 Autoneg Enabled */
-		reg_val = MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN;
-	} else {
 	/* CL73 Autoneg Disabled */
 	reg_val = 0;
-	}
+
 	CL45_WR_OVER_CL22(bp, params->port,
 			      params->phy_addr,
 			      MDIO_REG_BANK_CL73_IEEEB0,
@@ -1396,27 +1342,9 @@ static void bnx2x_set_ieee_aneg_advertisment(struct link_params *params,
 static void bnx2x_restart_autoneg(struct link_params *params)
 {
 	struct bnx2x *bp = params->bp;
+	u16 mii_control;
 	DP(NETIF_MSG_LINK, "bnx2x_restart_autoneg\n");
-	if (SUPPORT_CL73) {
-		/* enable and restart clause 73 aneg */
-		u16 an_ctrl;
-
-		CL45_RD_OVER_CL22(bp, params->port,
-				      params->phy_addr,
-				      MDIO_REG_BANK_CL73_IEEEB0,
-				      MDIO_CL73_IEEEB0_CL73_AN_CONTROL,
-				  &an_ctrl);
-		CL45_WR_OVER_CL22(bp, params->port,
-				      params->phy_addr,
-				MDIO_REG_BANK_CL73_IEEEB0,
-				MDIO_CL73_IEEEB0_CL73_AN_CONTROL,
-				(an_ctrl |
-				MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN |
-				MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN));
-
-	} else {
 	/* Enable and restart BAM/CL37 aneg */
-		u16 mii_control;
 
 	CL45_RD_OVER_CL22(bp, params->port,
 			      params->phy_addr,
@@ -1433,7 +1361,6 @@ static void bnx2x_restart_autoneg(struct link_params *params)
 			      (mii_control |
 			       MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
 			       MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN));
-	}
 }
 
 static void bnx2x_initialize_sgmii_process(struct link_params *params,