ASoC: jive: Automatically disconnect non-connected pins

All DAPM input and output pins of the wm8750 are either used in the card's
DAPM routing table or are marked as not connected.

Set the fully_routed flag of the card instead of manually marking the unused
inputs and outputs as not connected. This makes the code a bit shorter and
cleaner.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

sound/soc/samsung/jive_wm8750.c

@@ -83,22 +83,6 @@ static struct snd_soc_ops jive_ops = {
 	.hw_params	= jive_hw_params,
 };
 
-static int jive_wm8750_init(struct snd_soc_pcm_runtime *rtd)
-{
-	struct snd_soc_codec *codec = rtd->codec;
-	struct snd_soc_dapm_context *dapm = &codec->dapm;
-
-	/* These endpoints are not being used. */
-	snd_soc_dapm_nc_pin(dapm, "LINPUT2");
-	snd_soc_dapm_nc_pin(dapm, "RINPUT2");
-	snd_soc_dapm_nc_pin(dapm, "LINPUT3");
-	snd_soc_dapm_nc_pin(dapm, "RINPUT3");
-	snd_soc_dapm_nc_pin(dapm, "OUT3");
-	snd_soc_dapm_nc_pin(dapm, "MONO");
-
-	return 0;
-}
-
 static struct snd_soc_dai_link jive_dai = {
 	.name		= "wm8750",
 	.stream_name	= "WM8750",
@@ -106,7 +90,6 @@ static struct snd_soc_dai_link jive_dai = {
 	.codec_dai_name = "wm8750-hifi",
 	.platform_name	= "s3c2412-i2s",
 	.codec_name	= "wm8750.0-001a",
-	.init		= jive_wm8750_init,
 	.dai_fmt	= SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
 			  SND_SOC_DAIFMT_CBS_CFS,
 	.ops		= &jive_ops,
@@ -123,6 +106,7 @@ static struct snd_soc_card snd_soc_machine_jive = {
 	.num_dapm_widgets = ARRAY_SIZE(wm8750_dapm_widgets),
 	.dapm_routes	= audio_map,
 	.num_dapm_routes = ARRAY_SIZE(audio_map),
+	.fully_routed	= true,
 };
 
 static struct platform_device *jive_snd_device;