Merge nuts.ninka.net:/disk1/davem/BK/network-2.5

into nuts.ninka.net:/disk1/davem/BK/net-2.5

arch/i386/pci/irq.c

@@ -44,6 +44,11 @@ struct irq_router {
 	int (*set)(struct pci_dev *router, struct pci_dev *dev, int pirq, int new);
 };
 
+struct irq_router_handler {
+	u16 vendor;
+	int (*probe)(struct irq_router *r, struct pci_dev *router, u16 device);
+};
+
 int (*pcibios_enable_irq)(struct pci_dev *dev) = NULL;
 
 /*
@@ -258,111 +263,220 @@ static int pirq_cyrix_set(struct pci_dev *router, struct pci_dev *dev, int pirq,
 }
 
 /*
- *	PIRQ routing for SiS 85C503 router used in several SiS chipsets
- *	According to the SiS 5595 datasheet (preliminary V1.0, 12/24/1997)
- *	the related registers work as follows:
- *	
- *	general: one byte per re-routable IRQ,
+ *	PIRQ routing for SiS 85C503 router used in several SiS chipsets.
+ *	We have to deal with the following issues here:
+ *	- vendors have different ideas about the meaning of link values
+ *	- some onboard devices (integrated in the chipset) have special
+ *	  links and are thus routed differently (i.e. not via PCI INTA-INTD)
+ *	- different revision of the router have a different layout for
+ *	  the routing registers, particularly for the onchip devices
+ *
+ *	For all routing registers the common thing is we have one byte
+ *	per routeable link which is defined as:
  *		 bit 7      IRQ mapping enabled (0) or disabled (1)
- *		 bits [6:4] reserved
+ *		 bits [6:4] reserved (sometimes used for onchip devices)
  *		 bits [3:0] IRQ to map to
  *		     allowed: 3-7, 9-12, 14-15
  *		     reserved: 0, 1, 2, 8, 13
  *
- *	individual registers in device config space:
+ *	The config-space registers located at 0x41/0x42/0x43/0x44 are
+ *	always used to route the normal PCI INT A/B/C/D respectively.
+ *	Apparently there are systems implementing PCI routing table using
+ *	link values 0x01-0x04 and others using 0x41-0x44 for PCI INTA..D.
+ *	We try our best to handle both link mappings.
+ *	
+ *	Currently (2003-05-21) it appears most SiS chipsets follow the
+ *	definition of routing registers from the SiS-5595 southbridge.
+ *	According to the SiS 5595 datasheets the revision id's of the
+ *	router (ISA-bridge) should be 0x01 or 0xb0.
  *
- *	0x41/0x42/0x43/0x44:	PCI INT A/B/C/D - bits as in general case
+ *	Furthermore we've also seen lspci dumps with revision 0x00 and 0xb1.
+ *	Looks like these are used in a number of SiS 5xx/6xx/7xx chipsets.
+ *	They seem to work with the current routing code. However there is
+ *	some concern because of the two USB-OHCI HCs (original SiS 5595
+ *	had only one). YMMV.
  *
- *	0x61:			IDEIRQ: bits as in general case - but:
- *				bits [6:5] must be written 01
- *				bit 4 channel-select primary (0), secondary (1)
+ *	Onchip routing for router rev-id 0x01/0xb0 and probably 0x00/0xb1:
  *
- *	0x62:			USBIRQ: bits as in general case - but:
- *				bit 4 OHCI function disabled (0), enabled (1)
+ *	0x61:	IDEIRQ:
+ *		bits [6:5] must be written 01
+ *		bit 4 channel-select primary (0), secondary (1)
+ *
+ *	0x62:	USBIRQ:
+ *		bit 6 OHCI function disabled (0), enabled (1)
  *	
- *	0x6a:			ACPI/SCI IRQ - bits as in general case
+ *	0x6a:	ACPI/SCI IRQ: bits 4-6 reserved
+ *
+ *	0x7e:	Data Acq. Module IRQ - bits 4-6 reserved
+ *
+ *	We support USBIRQ (in addition to INTA-INTD) and keep the
+ *	IDE, ACPI and DAQ routing untouched as set by the BIOS.
+ *
+ *	Currently the only reported exception is the new SiS 65x chipset
+ *	which includes the SiS 69x southbridge. Here we have the 85C503
+ *	router revision 0x04 and there are changes in the register layout
+ *	mostly related to the different USB HCs with USB 2.0 support.
  *
- *	0x7e:			Data Acq. Module IRQ - bits as in general case
+ *	Onchip routing for router rev-id 0x04 (try-and-error observation)
  *
- *	Apparently there are systems implementing PCI routing table using both
- *	link values 0x01-0x04 and 0x41-0x44 for PCI INTA..D, but register offsets
- *	like 0x62 as link values for USBIRQ e.g. So there is no simple
- *	"register = offset + pirq" relation.
- *	Currently we support PCI INTA..D and USBIRQ and try our best to handle
- *	both link mappings.
- *	IDE/ACPI/DAQ mapping is currently unsupported (left untouched as set by BIOS).
+ *	0x60/0x61/0x62/0x63:	1xEHCI and 3xOHCI (companion) USB-HCs
+ *				bit 6-4 are probably unused, not like 5595
  */
 
-static int pirq_sis_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
+#define PIRQ_SIS_IRQ_MASK	0x0f
+#define PIRQ_SIS_IRQ_DISABLE	0x80
+#define PIRQ_SIS_USB_ENABLE	0x40
+
+/* return value:
+ * -1 on error
+ * 0 for PCI INTA-INTD
+ * 0 or enable bit mask to check or set for onchip functions
+ */
+static inline int pirq_sis5595_onchip(int pirq, int *reg)
 {
-	u8 x;
-	int reg = pirq;
+	int ret = -1;
 
+	*reg = pirq;
 	switch(pirq) {
-		case 0x01:
-		case 0x02:
-		case 0x03:
-		case 0x04:
-			reg += 0x40;
-		case 0x41:
-		case 0x42:
-		case 0x43:
-		case 0x44:
-		case 0x62:
-			pci_read_config_byte(router, reg, &x);
-			if (reg != 0x62)
-				break;
-			if (!(x & 0x40))
-				return 0;
-			break;
-		case 0x61:
-		case 0x6a:
-		case 0x7e:
-			printk(KERN_INFO "SiS pirq: advanced IDE/ACPI/DAQ mapping not yet implemented\n");
-			return 0;
-		default:			
-			printk(KERN_INFO "SiS router pirq escape (%d)\n", pirq);
-			return 0;
+	case 0x01:
+	case 0x02:
+	case 0x03:
+	case 0x04:
+		*reg += 0x40;
+	case 0x41:
+	case 0x42:
+	case 0x43:
+	case 0x44:
+		ret = 0;
+		break;
+
+	case 0x62:
+		ret = PIRQ_SIS_USB_ENABLE;	/* documented for 5595 */
+		break;
+
+	case 0x61:
+	case 0x6a:
+	case 0x7e:
+		printk(KERN_INFO "SiS pirq: IDE/ACPI/DAQ mapping not implemented: (%u)\n",
+		       (unsigned) pirq);
+		/* fall thru */
+	default:
+		printk(KERN_INFO "SiS router unknown request: (%u)\n",
+		       (unsigned) pirq);
+		break;
 	}
-	return (x & 0x80) ? 0 : (x & 0x0f);
-}
+	return ret;
+}		
 
-static int pirq_sis_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+/* return value:
+ * -1 on error
+ * 0 for PCI INTA-INTD
+ * 0 or enable bit mask to check or set for onchip functions
+ */
+static inline int pirq_sis96x_onchip(int pirq, int *reg)
 {
-	u8 x;
-	int reg = pirq;
+	int ret = -1;
 
+	*reg = pirq;
 	switch(pirq) {
-		case 0x01:
-		case 0x02:
-		case 0x03:
-		case 0x04:
-			reg += 0x40;
-		case 0x41:
-		case 0x42:
-		case 0x43:
-		case 0x44:
-		case 0x62:
-			x = (irq&0x0f) ? (irq&0x0f) : 0x80;
-			if (reg != 0x62)
-				break;
-			/* always mark OHCI enabled, as nothing else knows about this */
-			x |= 0x40;
-			break;
-		case 0x61:
-		case 0x6a:
-		case 0x7e:
-			printk(KERN_INFO "advanced SiS pirq mapping not yet implemented\n");
-			return 0;
-		default:			
-			printk(KERN_INFO "SiS router pirq escape (%d)\n", pirq);
-			return 0;
+	case 0x01:
+	case 0x02:
+	case 0x03:
+	case 0x04:
+		*reg += 0x40;
+	case 0x41:
+	case 0x42:
+	case 0x43:
+	case 0x44:
+	case 0x60:
+	case 0x61:
+	case 0x62:
+	case 0x63:
+		ret = 0;
+		break;
+
+	default:
+		printk(KERN_INFO "SiS router unknown request: (%u)\n",
+		       (unsigned) pirq);
+		break;
 	}
+	return ret;
+}		
+
+
+static int pirq_sis5595_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
+{
+	u8 x;
+	int reg, check;
+
+	check = pirq_sis5595_onchip(pirq, &reg);
+	if (check < 0)
+		return 0;
+
+	pci_read_config_byte(router, reg, &x);
+	if (check != 0  &&  !(x & check))
+		return 0;
+
+	return (x & PIRQ_SIS_IRQ_DISABLE) ? 0 : (x & PIRQ_SIS_IRQ_MASK);
+}
+
+static int pirq_sis96x_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
+{
+	u8 x;
+	int reg, check;
+
+	check = pirq_sis96x_onchip(pirq, &reg);
+	if (check < 0)
+		return 0;
+
+	pci_read_config_byte(router, reg, &x);
+	if (check != 0  &&  !(x & check))
+		return 0;
+
+	return (x & PIRQ_SIS_IRQ_DISABLE) ? 0 : (x & PIRQ_SIS_IRQ_MASK);
+}
+
+static int pirq_sis5595_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+{
+	u8 x;
+	int reg, set;
+
+	set = pirq_sis5595_onchip(pirq, &reg);
+	if (set < 0)
+		return 0;
+
+	x = (irq & PIRQ_SIS_IRQ_MASK);
+	if (x == 0)
+		x = PIRQ_SIS_IRQ_DISABLE;
+	else
+		x |= set;
+
 	pci_write_config_byte(router, reg, x);
 
 	return 1;
 }
 
+static int pirq_sis96x_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+{
+	u8 x;
+	int reg, set;
+
+	set = pirq_sis96x_onchip(pirq, &reg);
+	if (set < 0)
+		return 0;
+
+	x = (irq & PIRQ_SIS_IRQ_MASK);
+	if (x == 0)
+		x = PIRQ_SIS_IRQ_DISABLE;
+	else
+		x |= set;
+
+	pci_write_config_byte(router, reg, x);
+
+	return 1;
+}
+
+
 /*
  * VLSI: nibble offset 0x74 - educated guess due to routing table and
  *       config space of VLSI 82C534 PCI-bridge/router (1004:0102)
@@ -455,96 +569,252 @@ static int pirq_bios_set(struct pci_dev *router, struct pci_dev *dev, int pirq,
 	return pcibios_set_irq_routing(bridge, pin, irq);
 }
 
-static struct irq_router pirq_bios_router =
-	{ "BIOS", 0, 0, NULL, pirq_bios_set };
+#endif
+
 
+static __init int intel_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+{
+#if 0 /* Let's see what chip this is supposed to be ... */
+	/* We must not touch 440GX even if we have tables. 440GX has
+	   different IRQ routing weirdness */
+	if (pci_find_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82440GX, NULL))
+		return 0;
 #endif
 
-static struct irq_router pirq_routers[] = {
-	{ "PIIX", PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371FB_0, pirq_piix_get, pirq_piix_set },
-	{ "PIIX", PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, pirq_piix_get, pirq_piix_set },
-	{ "PIIX", PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0, pirq_piix_get, pirq_piix_set },
-	{ "PIIX", PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371MX,   pirq_piix_get, pirq_piix_set },
-	{ "PIIX", PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_0, pirq_piix_get, pirq_piix_set },
-	{ "PIIX", PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, pirq_piix_get, pirq_piix_set },
-	{ "PIIX", PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, pirq_piix_get, pirq_piix_set },
-	{ "PIIX", PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, pirq_piix_get, pirq_piix_set },
-	{ "PIIX", PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10, pirq_piix_get, pirq_piix_set },
-	{ "PIIX", PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, pirq_piix_get, pirq_piix_set },
-	{ "PIIX", PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, pirq_piix_get, pirq_piix_set },
-	{ "PIIX", PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, pirq_piix_get, pirq_piix_set },
-	{ "PIIX", PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801E_0, pirq_piix_get, pirq_piix_set },
-	{ "PIIX", PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, pirq_piix_get, pirq_piix_set },
-	{ "PIIX", PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_0, pirq_piix_get, pirq_piix_set },
-
-	{ "ALI", PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, pirq_ali_get, pirq_ali_set },
-
-	{ "ITE", PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_IT8330G_0, pirq_ite_get, pirq_ite_set },
-
-	{ "VIA", PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, pirq_via_get, pirq_via_set },
-	{ "VIA", PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596, pirq_via_get, pirq_via_set },
-	{ "VIA", PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, pirq_via_get, pirq_via_set },
-
-	{ "OPTI", PCI_VENDOR_ID_OPTI, PCI_DEVICE_ID_OPTI_82C700, pirq_opti_get, pirq_opti_set },
-
-	{ "NatSemi", PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, pirq_cyrix_get, pirq_cyrix_set },
-	{ "SIS", PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, pirq_sis_get, pirq_sis_set },
-	{ "VLSI 82C534", PCI_VENDOR_ID_VLSI, PCI_DEVICE_ID_VLSI_82C534, pirq_vlsi_get, pirq_vlsi_set },
-	{ "ServerWorks", PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4,
-	  pirq_serverworks_get, pirq_serverworks_set },
-	{ "ServerWorks", PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5,
-	  pirq_serverworks_get, pirq_serverworks_set },
-	{ "AMD756 VIPER", PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_740B,
-		pirq_amd756_get, pirq_amd756_set },
-	{ "AMD766", PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7413,
-		pirq_amd756_get, pirq_amd756_set },
-	{ "AMD768", PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_OPUS_7443,
-		pirq_amd756_get, pirq_amd756_set },
-
-	{ "default", 0, 0, NULL, NULL }
-};
+	switch(device)
+	{
+		case PCI_DEVICE_ID_INTEL_82371FB_0:
+		case PCI_DEVICE_ID_INTEL_82371SB_0:
+		case PCI_DEVICE_ID_INTEL_82371AB_0:
+		case PCI_DEVICE_ID_INTEL_82371MX:
+		case PCI_DEVICE_ID_INTEL_82443MX_0:
+		case PCI_DEVICE_ID_INTEL_82801AA_0:
+		case PCI_DEVICE_ID_INTEL_82801AB_0:
+		case PCI_DEVICE_ID_INTEL_82801BA_0:
+		case PCI_DEVICE_ID_INTEL_82801BA_10:
+		case PCI_DEVICE_ID_INTEL_82801CA_0:
+		case PCI_DEVICE_ID_INTEL_82801CA_12:
+		case PCI_DEVICE_ID_INTEL_82801DB_0:
+		case PCI_DEVICE_ID_INTEL_82801E_0:
+		case PCI_DEVICE_ID_INTEL_82801EB_0:
+		case PCI_DEVICE_ID_INTEL_ESB_0:
+			r->name = "PIIX/ICH";
+			r->get = pirq_piix_get;
+			r->set = pirq_piix_set;
+			return 1;
+	}
+	return 0;
+}
 
-static struct irq_router *pirq_router;
+static __init int via_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+{
+	/* FIXME: We should move some of the quirk fixup stuff here */
+	switch(device)
+	{
+		case PCI_DEVICE_ID_VIA_82C586_0:
+		case PCI_DEVICE_ID_VIA_82C596:
+		case PCI_DEVICE_ID_VIA_82C686:
+		case PCI_DEVICE_ID_VIA_8231:
+		/* FIXME: add new ones for 8233/5 */
+			r->name = "VIA";
+			r->get = pirq_via_get;
+			r->set = pirq_via_set;
+			return 1;
+	}
+	return 0;
+}
+
+static __init int vlsi_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+{
+	switch(device)
+	{
+		case PCI_DEVICE_ID_VLSI_82C534:
+			r->name = "VLSI 82C534";
+			r->get = pirq_vlsi_get;
+			r->set = pirq_vlsi_set;
+			return 1;
+	}
+	return 0;
+}
+
+
+static __init int serverworks_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+{
+	switch(device)
+	{
+		case PCI_DEVICE_ID_SERVERWORKS_OSB4:
+		case PCI_DEVICE_ID_SERVERWORKS_CSB5:
+			r->name = "ServerWorks";
+			r->get = pirq_serverworks_get;
+			r->set = pirq_serverworks_set;
+			return 1;
+	}
+	return 0;
+}
+
+static __init int sis_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+{
+	if (device != PCI_DEVICE_ID_SI_503)
+		return 0;
+		
+	/*
+	 * In case of SiS south bridge, we need to detect the two
+	 * kinds of routing tables we have seen so far (5595 and 96x). 
+	 *
+	 * The 96x tends to still come with routing tables that claim
+	 * to be 503's.. Silly thing. Check the actual router chip.
+	 */
+	if ((router->device & 0xfff0) == 0x0960) {
+		r->name = "SIS96x";
+		r->get = pirq_sis96x_get;
+		r->set = pirq_sis96x_set;
+		DBG("PCI: Detecting SiS router at %02x:%02x : SiS096x detected\n",
+		    rt->rtr_bus, rt->rtr_devfn);
+	} else {
+		r->name = "SIS5595";
+		r->get = pirq_sis5595_get;
+		r->set = pirq_sis5595_set;
+		DBG("PCI: Detecting SiS router at %02x:%02x : SiS5595 detected\n",
+		    rt->rtr_bus, rt->rtr_devfn);
+	}
+	return 1;
+}
+
+static __init int cyrix_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+{
+	switch(device)
+	{
+		case PCI_DEVICE_ID_CYRIX_5520:
+			r->name = "NatSemi";
+			r->get = pirq_cyrix_get;
+			r->set = pirq_cyrix_set;
+			return 1;
+	}
+	return 0;
+}
+
+static __init int opti_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+{
+	switch(device)
+	{
+		case PCI_DEVICE_ID_OPTI_82C700:
+			r->name = "OPTI";
+			r->get = pirq_opti_get;
+			r->set = pirq_opti_set;
+			return 1;
+	}
+	return 0;
+}
+
+static __init int ite_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+{
+	switch(device)
+	{
+		case PCI_DEVICE_ID_ITE_IT8330G_0:
+			r->name = "ITE";
+			r->get = pirq_ite_get;
+			r->set = pirq_ite_set;
+			return 1;
+	}
+	return 0;
+}
+
+static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+{
+	switch(device)
+	{
+		case PCI_DEVICE_ID_AL_M1533:
+			r->name = "ALI";
+			r->get = pirq_ali_get;
+			r->set = pirq_ali_set;
+			return 1;
+		/* Should add 156x some day */
+	}
+	return 0;
+}
+
+static __init int amd_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+{
+	switch(device)
+	{
+		case PCI_DEVICE_ID_AMD_VIPER_740B:
+			r->name = "AMD756";
+			break;
+		case PCI_DEVICE_ID_AMD_VIPER_7413:
+			r->name = "AMD766";
+			break;
+		case PCI_DEVICE_ID_AMD_VIPER_7443:
+			r->name = "AMD768";
+			break;
+		default:
+			return 0;
+	}
+	r->get = pirq_amd756_get;
+	r->set = pirq_amd756_set;
+	return 1;
+}
+		
+static __initdata struct irq_router_handler pirq_routers[] = {
+	{ PCI_VENDOR_ID_INTEL, intel_router_probe },
+	{ PCI_VENDOR_ID_AL, ali_router_probe },
+	{ PCI_VENDOR_ID_ITE, ite_router_probe },
+	{ PCI_VENDOR_ID_VIA, via_router_probe },
+	{ PCI_VENDOR_ID_OPTI, opti_router_probe },
+	{ PCI_VENDOR_ID_SI, sis_router_probe },
+	{ PCI_VENDOR_ID_CYRIX, cyrix_router_probe },
+	{ PCI_VENDOR_ID_VLSI, vlsi_router_probe },
+	{ PCI_VENDOR_ID_SERVERWORKS, serverworks_router_probe },
+	{ PCI_VENDOR_ID_AMD, amd_router_probe },
+	/* Someone with docs needs to add the ATI Radeon IGP */
+	{ 0, NULL }
+};
+static struct irq_router pirq_router;
 static struct pci_dev *pirq_router_dev;
 
-static void __init pirq_find_router(void)
+
+/*
+ *	FIXME: should we have an option to say "generic for
+ *	chipset" ?
+ */
+ 
+static void __init pirq_find_router(struct irq_router *r)
 {
 	struct irq_routing_table *rt = pirq_table;
-	struct irq_router *r;
+	struct irq_router_handler *h;
 
 #ifdef CONFIG_PCI_BIOS
 	if (!rt->signature) {
 		printk(KERN_INFO "PCI: Using BIOS for IRQ routing\n");
-		pirq_router = &pirq_bios_router;
+		r->set = pirq_bios_set;
+		r->name = "BIOS";
 		return;
 	}
 #endif
 
+	/* Default unless a driver reloads it */
+	r->name = "default";
+	r->get = NULL;
+	r->set = NULL;
+	
 	DBG("PCI: Attempting to find IRQ router for %04x:%04x\n",
 	    rt->rtr_vendor, rt->rtr_device);
 
-	/* fall back to default router if nothing else found */
-	pirq_router = &pirq_routers[ARRAY_SIZE(pirq_routers) - 1];
-
 	pirq_router_dev = pci_find_slot(rt->rtr_bus, rt->rtr_devfn);
 	if (!pirq_router_dev) {
 		DBG("PCI: Interrupt router not found at %02x:%02x\n", rt->rtr_bus, rt->rtr_devfn);
 		return;
 	}
 
-	for(r=pirq_routers; r->vendor; r++) {
-		/* Exact match against router table entry? Use it! */
-		if (r->vendor == rt->rtr_vendor && r->device == rt->rtr_device) {
-			pirq_router = r;
+	for( h = pirq_routers; h->vendor; h++) {
+		/* First look for a router match */
+		if (rt->rtr_vendor == h->vendor && h->probe(r, pirq_router_dev, rt->rtr_device))
+			break;
+		/* Fall back to a device match */
+		if (pirq_router_dev->vendor == h->vendor && h->probe(r, pirq_router_dev, pirq_router_dev->device))
 			break;
-		}
-		/* Match against router device entry? Use it as a fallback */
-		if (r->vendor == pirq_router_dev->vendor && r->device == pirq_router_dev->device) {
-			pirq_router = r;
-		}
 	}
 	printk(KERN_INFO "PCI: Using IRQ router %s [%04x/%04x] at %s\n",
-		pirq_router->name,
+		pirq_router.name,
 		pirq_router_dev->vendor,
 		pirq_router_dev->device,
 		pci_name(pirq_router_dev));
@@ -574,7 +844,7 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 	int i, pirq, newirq;
 	int irq = 0;
 	u32 mask;
-	struct irq_router *r = pirq_router;
+	struct irq_router *r = &pirq_router;
 	struct pci_dev *dev2 = NULL;
 	char *msg = NULL;
 
@@ -775,7 +1045,7 @@ static int __init pcibios_irq_init(void)
 #endif
 	if (pirq_table) {
 		pirq_peer_trick();
-		pirq_find_router();
+		pirq_find_router(&pirq_router);
 		if (pirq_table->exclusive_irqs) {
 			int i;
 			for (i=0; i<16; i++)

drivers/ide/pci/amd74xx.c

 /*
- * Version 2.11
+ * Version 2.13
  *
- * AMD 755/756/766/8111 and nVidia nForce IDE driver for Linux.
+ * AMD 755/756/766/8111 and nVidia nForce/2/2s/3/3s IDE driver for Linux.
  *
  * Copyright (c) 2000-2002 Vojtech Pavlik
  *
@@ -40,9 +40,11 @@
 #define AMD_UDMA_33		0x01
 #define AMD_UDMA_66		0x02
 #define AMD_UDMA_100		0x03
+#define AMD_UDMA_133		0x04
 #define AMD_CHECK_SWDMA		0x08
 #define AMD_BAD_SWDMA		0x10
 #define AMD_BAD_FIFO		0x20
+#define AMD_CHECK_SERENADE	0x40
 
 /*
  * AMD SouthBridge chips.
@@ -50,27 +52,33 @@
 
 static struct amd_ide_chip {
 	unsigned short id;
-	unsigned char rev;
 	unsigned long base;
 	unsigned char flags;
 } amd_ide_chips[] = {
-	{ PCI_DEVICE_ID_AMD_COBRA_7401, 0x00, 0x40, AMD_UDMA_33 | AMD_BAD_SWDMA },	/* AMD-755 Cobra */
-	{ PCI_DEVICE_ID_AMD_VIPER_7409, 0x00, 0x40, AMD_UDMA_66 | AMD_CHECK_SWDMA },	/* AMD-756 Viper */
-	{ PCI_DEVICE_ID_AMD_VIPER_7411, 0x00, 0x40, AMD_UDMA_100 | AMD_BAD_FIFO },	/* AMD-766 Viper */
-	{ PCI_DEVICE_ID_AMD_OPUS_7441, 0x00, 0x40, AMD_UDMA_100 },			/* AMD-768 Opus */
-	{ PCI_DEVICE_ID_AMD_8111_IDE,  0x00, 0x40, AMD_UDMA_100 },			/* AMD-8111 */
-        { PCI_DEVICE_ID_NVIDIA_NFORCE_IDE, 0x00, 0x50, AMD_UDMA_100 },                  /* nVidia nForce */
-	{ PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE, 0x00, 0x50, AMD_UDMA_100 },			/* nVidia nForce 2 */
+	{ PCI_DEVICE_ID_AMD_COBRA_7401,		0x40, AMD_UDMA_33 | AMD_BAD_SWDMA },
+	{ PCI_DEVICE_ID_AMD_VIPER_7409,		0x40, AMD_UDMA_66 | AMD_CHECK_SWDMA },
+	{ PCI_DEVICE_ID_AMD_VIPER_7411,		0x40, AMD_UDMA_100 | AMD_BAD_FIFO },
+	{ PCI_DEVICE_ID_AMD_OPUS_7441,		0x40, AMD_UDMA_100 },
+	{ PCI_DEVICE_ID_AMD_8111_IDE,		0x40, AMD_UDMA_133 | AMD_CHECK_SERENADE },
+	{ PCI_DEVICE_ID_NVIDIA_NFORCE_IDE,	0x50, AMD_UDMA_100 },
+	{ PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE,	0x50, AMD_UDMA_133 },
+	{ PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE,	0x50, AMD_UDMA_133 },
+	{ PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA,	0x50, AMD_UDMA_133 },
+	{ PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE,	0x50, AMD_UDMA_133 },
+	{ PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE,	0x50, AMD_UDMA_133 },
+	{ PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA,	0x50, AMD_UDMA_133 },
+	{ PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2,	0x50, AMD_UDMA_133 },
 	{ 0 }
 };
 
 static struct amd_ide_chip *amd_config;
+static ide_pci_device_t *amd_chipset;
 static unsigned int amd_80w;
 static unsigned int amd_clock;
 
-static unsigned char amd_cyc2udma[] = { 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3 };
-static unsigned char amd_udma2cyc[] = { 4, 6, 8, 10, 3, 2, 1, 1 };
-static char *amd_dma[] = { "MWDMA16", "UDMA33", "UDMA66", "UDMA100" };
+static unsigned char amd_cyc2udma[] = { 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3, 3, 3, 3, 3, 7 };
+static unsigned char amd_udma2cyc[] = { 4, 6, 8, 10, 3, 2, 1, 15 };
+static char *amd_dma[] = { "MWDMA16", "UDMA33", "UDMA66", "UDMA100", "UDMA133" };
 
 /*
  * AMD /proc entry.
@@ -102,7 +110,7 @@ static int amd74xx_get_info(char *buffer, char **addr, off_t offset, int count)
 
 	amd_print("----------AMD BusMastering IDE Configuration----------------");
 
-	amd_print("Driver Version:                     2.11");
+	amd_print("Driver Version:                     2.13");
 	amd_print("South Bridge:                       %s", pci_name(bmide_dev));
 
 	pci_read_config_byte(dev, PCI_REVISION_ID, &t);
@@ -153,6 +161,12 @@ static int amd74xx_get_info(char *buffer, char **addr, off_t offset, int count)
 			continue;
 		}
 
+		if (den[i] && uen[i] && udma[i] == 15) {
+			speed[i] = amd_clock * 4;
+			cycle[i] = 500000 / amd_clock;
+			continue;
+		}
+
 		speed[i] = 4 * amd_clock / ((den[i] && uen[i]) ? udma[i] : (active[i] + recover[i]) * 2);
 		cycle[i] = 1000000 * ((den[i] && uen[i]) ? udma[i] : (active[i] + recover[i]) * 2) / amd_clock / 2;
 	}
@@ -198,6 +212,7 @@ static void amd_set_speed(struct pci_dev *dev, unsigned char dn, struct ide_timi
 		case AMD_UDMA_33:  t = timing->udma ? (0xc0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break;
 		case AMD_UDMA_66:  t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 2, 10)]) : 0x03; break;
 		case AMD_UDMA_100: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 10)]) : 0x03; break;
+		case AMD_UDMA_133: t = timing->udma ? (0xc0 | amd_cyc2udma[FIT(timing->udma, 1, 15)]) : 0x03; break;
 		default: return;
 	}
 
@@ -232,6 +247,7 @@ static int amd_set_drive(ide_drive_t *drive, u8 speed)
 	}
 
 	if (speed == XFER_UDMA_5 && amd_clock <= 33333) t.udma = 1;
+	if (speed == XFER_UDMA_6 && amd_clock <= 33333) t.udma = 15;
 
 	amd_set_speed(HWIF(drive)->pci_dev, drive->dn, &t);
 
@@ -271,7 +287,8 @@ static int amd74xx_ide_dma_check(ide_drive_t *drive)
 		XFER_PIO | XFER_EPIO | XFER_MWDMA | XFER_UDMA |
 		((amd_config->flags & AMD_BAD_SWDMA) ? 0 : XFER_SWDMA) |
 		(w80 && (amd_config->flags & AMD_UDMA) >= AMD_UDMA_66 ? XFER_UDMA_66 : 0) |
-		(w80 && (amd_config->flags & AMD_UDMA) >= AMD_UDMA_100 ? XFER_UDMA_100 : 0));
+		(w80 && (amd_config->flags & AMD_UDMA) >= AMD_UDMA_100 ? XFER_UDMA_100 : 0) |
+		(w80 && (amd_config->flags & AMD_UDMA) >= AMD_UDMA_133 ? XFER_UDMA_133 : 0));
 
 	amd_set_drive(drive, speed);
 
@@ -307,13 +324,15 @@ static unsigned int __init init_chipset_amd74xx(struct pci_dev *dev, const char
 
 	switch (amd_config->flags & AMD_UDMA) {
 
+		case AMD_UDMA_133:
 		case AMD_UDMA_100:
 			pci_read_config_byte(dev, AMD_CABLE_DETECT, &t);
 			pci_read_config_dword(dev, AMD_UDMA_TIMING, &u);
 			amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0);
 			for (i = 24; i >= 0; i -= 8)
 				if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) {
-					printk(KERN_WARNING "AMD_IDE: Bios didn't set cable bits correctly. Enabling workaround.\n");
+					printk(KERN_WARNING "%s: BIOS didn't set cable bits correctly. Enabling workaround.\n",
+						amd_chipset->name);
 					amd_80w |= (1 << (1 - (i >> 4)));
 				}
 			break;
@@ -334,6 +353,15 @@ static unsigned int __init init_chipset_amd74xx(struct pci_dev *dev, const char
 	pci_write_config_byte(dev, AMD_IDE_CONFIG,
 		(amd_config->flags & AMD_BAD_FIFO) ? (t & 0x0f) : (t | 0xf0));
 
+/*
+ * Take care of incorrectly wired Serenade mainboards.
+ */
+
+	if ((amd_config->flags & AMD_CHECK_SERENADE) &&
+		dev->subsystem_vendor == PCI_VENDOR_ID_AMD &&
+		dev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE)
+			amd_config->flags = AMD_UDMA_100;
+
 /*
  * Determine the system bus clock.
  */
@@ -347,8 +375,10 @@ static unsigned int __init init_chipset_amd74xx(struct pci_dev *dev, const char
 	}
 
 	if (amd_clock < 20000 || amd_clock > 50000) {
-		printk(KERN_WARNING "AMD_IDE: User given PCI clock speed impossible (%d), using 33 MHz instead.\n", amd_clock);
-		printk(KERN_WARNING "AMD_IDE: Use ide0=ata66 if you want to assume 80-wire cable\n");
+		printk(KERN_WARNING "%s: User given PCI clock speed impossible (%d), using 33 MHz instead.\n",
+			amd_chipset->name, amd_clock);
+		printk(KERN_WARNING "%s: Use ide0=ata66 if you want to assume 80-wire cable\n",
+			amd_chipset->name);
 		amd_clock = 33333;
 	}
 
@@ -357,8 +387,8 @@ static unsigned int __init init_chipset_amd74xx(struct pci_dev *dev, const char
  */
 
 	pci_read_config_byte(dev, PCI_REVISION_ID, &t);
-	printk(KERN_INFO "AMD_IDE: %s (rev %02x) %s controller on pci%s\n",
-		pci_name(dev), t, amd_dma[amd_config->flags & AMD_UDMA], pci_name(dev));
+	printk(KERN_INFO "%s: %s (rev %02x) %s controller\n",
+		amd_chipset->name, pci_name(dev), t, amd_dma[amd_config->flags & AMD_UDMA]);
 
 /*
  * Register /proc/ide/amd74xx entry
@@ -373,8 +403,7 @@ static unsigned int __init init_chipset_amd74xx(struct pci_dev *dev, const char
         }
 #endif /* DISPLAY_AMD_TIMINGS && CONFIG_PROC_FS */
 
-
-	return 0;
+	return dev->irq;
 }
 
 static void __init init_hwif_amd74xx(ide_hwif_t *hwif)
@@ -414,23 +443,29 @@ extern void ide_setup_pci_device(struct pci_dev *, ide_pci_device_t *);
 
 static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	ide_pci_device_t *d = amd74xx_chipsets + id->driver_data;
+	amd_chipset = amd74xx_chipsets + id->driver_data;
 	amd_config = amd_ide_chips + id->driver_data;
-	if (dev->device != d->device) BUG();
+	if (dev->device != amd_chipset->device) BUG();
 	if (dev->device != amd_config->id) BUG();
-	ide_setup_pci_device(dev, d);
+	ide_setup_pci_device(dev, amd_chipset);
 	MOD_INC_USE_COUNT;
 	return 0;
 }
 
 static struct pci_device_id amd74xx_pci_tbl[] = {
-	{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_COBRA_7401,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-	{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7409,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
-	{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7411,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
-	{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_OPUS_7441,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3},
-	{ PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_IDE, 	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
-	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5},
-	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6},
+	{ PCI_VENDOR_ID_AMD,	PCI_DEVICE_ID_AMD_COBRA_7401,		PCI_ANY_ID, PCI_ANY_ID, 0, 0,  0 },
+	{ PCI_VENDOR_ID_AMD,	PCI_DEVICE_ID_AMD_VIPER_7409,		PCI_ANY_ID, PCI_ANY_ID, 0, 0,  1 },
+	{ PCI_VENDOR_ID_AMD,	PCI_DEVICE_ID_AMD_VIPER_7411,		PCI_ANY_ID, PCI_ANY_ID, 0, 0,  2 },
+	{ PCI_VENDOR_ID_AMD,	PCI_DEVICE_ID_AMD_OPUS_7441,		PCI_ANY_ID, PCI_ANY_ID, 0, 0,  3 },
+	{ PCI_VENDOR_ID_AMD,	PCI_DEVICE_ID_AMD_8111_IDE,		PCI_ANY_ID, PCI_ANY_ID, 0, 0,  4 },
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0,  5 },
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0,  6 },
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0,  7 },
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA,	PCI_ANY_ID, PCI_ANY_ID, 0, 0,  8 },
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0,  9 },
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 10 },
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 11 },
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12 },
 	{ 0, },
 };
 

drivers/ide/pci/amd74xx.h

@@ -109,6 +109,72 @@ static ide_pci_device_t amd74xx_chipsets[] __devinitdata = {
 		.bootable	= ON_BOARD,
 		.extra		= 0,
 	},
+	{	/* 7 */
+		.vendor		= PCI_VENDOR_ID_NVIDIA,
+		.device		= PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE,
+		.name		= "NFORCE2S",
+		.init_chipset	= init_chipset_amd74xx,
+		.init_hwif	= init_hwif_amd74xx,
+		.channels	= 2,
+		.autodma	= AUTODMA,
+		.enablebits	= {{0x50,0x02,0x02}, {0x50,0x01,0x01}},
+		.bootable	= ON_BOARD,
+	},
+	{	/* 8 */
+		.vendor		= PCI_VENDOR_ID_NVIDIA,
+		.device		= PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA,
+		.name		= "NFORCE2S-SATA",
+		.init_chipset	= init_chipset_amd74xx,
+		.init_hwif	= init_hwif_amd74xx,
+		.channels	= 2,
+		.autodma	= AUTODMA,
+		.enablebits	= {{0x50,0x02,0x02}, {0x50,0x01,0x01}},
+		.bootable	= ON_BOARD,
+	},
+	{	/* 9 */
+		.vendor		= PCI_VENDOR_ID_NVIDIA,
+		.device		= PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE,
+		.name		= "NFORCE3",
+		.init_chipset	= init_chipset_amd74xx,
+		.init_hwif	= init_hwif_amd74xx,
+		.channels	= 2,
+		.autodma	= AUTODMA,
+		.enablebits	= {{0x50,0x02,0x02}, {0x50,0x01,0x01}},
+		.bootable	= ON_BOARD,
+	},
+	{	/* 10 */
+		.vendor		= PCI_VENDOR_ID_NVIDIA,
+		.device		= PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE,
+		.name		= "NFORCE3S",
+		.init_chipset	= init_chipset_amd74xx,
+		.init_hwif	= init_hwif_amd74xx,
+		.channels	= 2,
+		.autodma	= AUTODMA,
+		.enablebits	= {{0x50,0x02,0x02}, {0x50,0x01,0x01}},
+		.bootable	= ON_BOARD,
+	},
+	{	/* 11 */
+		.vendor		= PCI_VENDOR_ID_NVIDIA,
+		.device		= PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA,
+		.name		= "NFORCE3S-SATA",
+		.init_chipset	= init_chipset_amd74xx,
+		.init_hwif	= init_hwif_amd74xx,
+		.channels	= 2,
+		.autodma	= AUTODMA,
+		.enablebits	= {{0x50,0x02,0x02}, {0x50,0x01,0x01}},
+		.bootable	= ON_BOARD,
+	},
+	{	/* 12 */
+		.vendor		= PCI_VENDOR_ID_NVIDIA,
+		.device		= PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2,
+		.name		= "NFORCE3S-SATA2",
+		.init_chipset	= init_chipset_amd74xx,
+		.init_hwif	= init_hwif_amd74xx,
+		.channels	= 2,
+		.autodma	= AUTODMA,
+		.enablebits	= {{0x50,0x02,0x02}, {0x50,0x01,0x01}},
+		.bootable	= ON_BOARD,
+	},
 	{
 		.vendor		= 0,
 		.device		= 0,

include/linux/pci_ids.h

@@ -440,6 +440,7 @@
 #define PCI_DEVICE_ID_AMD_LANCE		0x2000
 #define PCI_DEVICE_ID_AMD_LANCE_HOME	0x2001
 #define PCI_DEVICE_ID_AMD_SCSI		0x2020
+#define PCI_DEVICE_ID_AMD_SERENADE	0x36c0
 #define PCI_DEVICE_ID_AMD_FE_GATE_7006	0x7006
 #define PCI_DEVICE_ID_AMD_FE_GATE_7007	0x7007
 #define PCI_DEVICE_ID_AMD_FE_GATE_700C	0x700C
@@ -1023,7 +1024,13 @@
 #define PCI_DEVICE_ID_NVIDIA_VTNT2		0x002C
 #define PCI_DEVICE_ID_NVIDIA_UVTNT2		0x002D
 #define PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE	0x0065
+#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE	0x0085
+#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA	0x008e
 #define PCI_DEVICE_ID_NVIDIA_ITNT2		0x00A0
+#define PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE	0x00d5
+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA	0x00e3
+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE	0x00e5
+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2	0x00ee
 #define PCI_DEVICE_ID_NVIDIA_GEFORCE_SDR	0x0100
 #define PCI_DEVICE_ID_NVIDIA_GEFORCE_DDR	0x0101
 #define PCI_DEVICE_ID_NVIDIA_QUADRO		0x0103