Commit 3ced0a88 authored by Shahed Shaikh's avatar Shahed Shaikh Committed by David S. Miller

qlcnic: Add support to run firmware POST

This patch adds support to run Power On Self Test (POST) for 83xx adapters.
POST can be run in 3 different speed modes :
	i)  Fast mode (takes about 690 ms)
	ii) Medium mode (takes about 2930 ms)
	iii) Slow mode (takes about 7500 ms)

To run POST, firmware file with name "83xx_post_fw.bin" should be present under
/lib/firmware directory. load_fw_file module parameter is used to specify
POST operation and its speed mode.
load_fw_file = 2 : Fast mode
load_fw_file = 3 : Medium mode
load_fw_file = 4 : Slow mode
Signed-off-by: default avatarShahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent c1b2037f
......@@ -540,6 +540,8 @@ struct qlcnic_hardware_context {
u8 lb_mode;
u16 vxlan_port;
struct device *hwmon_dev;
u32 post_mode;
bool run_post;
};
struct qlcnic_adapter_stats {
......
......@@ -83,6 +83,7 @@
/* Firmware image definitions */
#define QLC_83XX_BOOTLOADER_FLASH_ADDR 0x10000
#define QLC_83XX_FW_FILE_NAME "83xx_fw.bin"
#define QLC_83XX_POST_FW_FILE_NAME "83xx_post_fw.bin"
#define QLC_84XX_FW_FILE_NAME "84xx_fw.bin"
#define QLC_83XX_BOOT_FROM_FLASH 0
#define QLC_83XX_BOOT_FROM_FILE 0x12345678
......
......@@ -2075,6 +2075,121 @@ static void qlcnic_83xx_init_hw(struct qlcnic_adapter *p_dev)
dev_err(&p_dev->pdev->dev, "%s: failed\n", __func__);
}
/* POST FW related definations*/
#define QLC_83XX_POST_SIGNATURE_REG 0x41602014
#define QLC_83XX_POST_MODE_REG 0x41602018
#define QLC_83XX_POST_FAST_MODE 0
#define QLC_83XX_POST_MEDIUM_MODE 1
#define QLC_83XX_POST_SLOW_MODE 2
/* POST Timeout values in milliseconds */
#define QLC_83XX_POST_FAST_MODE_TIMEOUT 690
#define QLC_83XX_POST_MED_MODE_TIMEOUT 2930
#define QLC_83XX_POST_SLOW_MODE_TIMEOUT 7500
/* POST result values */
#define QLC_83XX_POST_PASS 0xfffffff0
#define QLC_83XX_POST_ASIC_STRESS_TEST_FAIL 0xffffffff
#define QLC_83XX_POST_DDR_TEST_FAIL 0xfffffffe
#define QLC_83XX_POST_ASIC_MEMORY_TEST_FAIL 0xfffffffc
#define QLC_83XX_POST_FLASH_TEST_FAIL 0xfffffff8
static int qlcnic_83xx_run_post(struct qlcnic_adapter *adapter)
{
struct qlc_83xx_fw_info *fw_info = adapter->ahw->fw_info;
struct device *dev = &adapter->pdev->dev;
int timeout, count, ret = 0;
u32 signature;
/* Set timeout values with extra 2 seconds of buffer */
switch (adapter->ahw->post_mode) {
case QLC_83XX_POST_FAST_MODE:
timeout = QLC_83XX_POST_FAST_MODE_TIMEOUT + 2000;
break;
case QLC_83XX_POST_MEDIUM_MODE:
timeout = QLC_83XX_POST_MED_MODE_TIMEOUT + 2000;
break;
case QLC_83XX_POST_SLOW_MODE:
timeout = QLC_83XX_POST_SLOW_MODE_TIMEOUT + 2000;
break;
default:
return -EINVAL;
}
strncpy(fw_info->fw_file_name, QLC_83XX_POST_FW_FILE_NAME,
QLC_FW_FILE_NAME_LEN);
ret = request_firmware(&fw_info->fw, fw_info->fw_file_name, dev);
if (ret) {
dev_err(dev, "POST firmware can not be loaded, skipping POST\n");
return 0;
}
ret = qlcnic_83xx_copy_fw_file(adapter);
if (ret)
return ret;
/* clear QLC_83XX_POST_SIGNATURE_REG register */
qlcnic_ind_wr(adapter, QLC_83XX_POST_SIGNATURE_REG, 0);
/* Set POST mode */
qlcnic_ind_wr(adapter, QLC_83XX_POST_MODE_REG,
adapter->ahw->post_mode);
QLC_SHARED_REG_WR32(adapter, QLCNIC_FW_IMG_VALID,
QLC_83XX_BOOT_FROM_FILE);
qlcnic_83xx_start_hw(adapter);
count = 0;
do {
msleep(100);
count += 100;
signature = qlcnic_ind_rd(adapter, QLC_83XX_POST_SIGNATURE_REG);
if (signature == QLC_83XX_POST_PASS)
break;
} while (timeout > count);
if (timeout <= count) {
dev_err(dev, "POST timed out, signature = 0x%08x\n", signature);
return -EIO;
}
switch (signature) {
case QLC_83XX_POST_PASS:
dev_info(dev, "POST passed, Signature = 0x%08x\n", signature);
break;
case QLC_83XX_POST_ASIC_STRESS_TEST_FAIL:
dev_err(dev, "POST failed, Test case : ASIC STRESS TEST, Signature = 0x%08x\n",
signature);
ret = -EIO;
break;
case QLC_83XX_POST_DDR_TEST_FAIL:
dev_err(dev, "POST failed, Test case : DDT TEST, Signature = 0x%08x\n",
signature);
ret = -EIO;
break;
case QLC_83XX_POST_ASIC_MEMORY_TEST_FAIL:
dev_err(dev, "POST failed, Test case : ASIC MEMORY TEST, Signature = 0x%08x\n",
signature);
ret = -EIO;
break;
case QLC_83XX_POST_FLASH_TEST_FAIL:
dev_err(dev, "POST failed, Test case : FLASH TEST, Signature = 0x%08x\n",
signature);
ret = -EIO;
break;
default:
dev_err(dev, "POST failed, Test case : INVALID, Signature = 0x%08x\n",
signature);
ret = -EIO;
break;
}
return ret;
}
static int qlcnic_83xx_load_fw_image_from_host(struct qlcnic_adapter *adapter)
{
struct qlc_83xx_fw_info *fw_info = adapter->ahw->fw_info;
......@@ -2119,8 +2234,27 @@ static int qlcnic_83xx_restart_hw(struct qlcnic_adapter *adapter)
if (qlcnic_83xx_copy_bootloader(adapter))
return err;
/* Check if POST needs to be run */
if (adapter->ahw->run_post) {
err = qlcnic_83xx_run_post(adapter);
if (err)
return err;
/* No need to run POST in next reset sequence */
adapter->ahw->run_post = false;
/* Again reset the adapter to load regular firmware */
qlcnic_83xx_stop_hw(adapter);
qlcnic_83xx_init_hw(adapter);
err = qlcnic_83xx_copy_bootloader(adapter);
if (err)
return err;
}
/* Boot either flash image or firmware image from host file system */
if (qlcnic_load_fw_file) {
if (qlcnic_load_fw_file == 1) {
if (qlcnic_83xx_load_fw_image_from_host(adapter))
return err;
} else {
......@@ -2329,6 +2463,25 @@ int qlcnic_83xx_init(struct qlcnic_adapter *adapter, int pci_using_dac)
adapter->rx_mac_learn = false;
ahw->msix_supported = !!qlcnic_use_msi_x;
/* Check if POST needs to be run */
switch (qlcnic_load_fw_file) {
case 2:
ahw->post_mode = QLC_83XX_POST_FAST_MODE;
ahw->run_post = true;
break;
case 3:
ahw->post_mode = QLC_83XX_POST_MEDIUM_MODE;
ahw->run_post = true;
break;
case 4:
ahw->post_mode = QLC_83XX_POST_SLOW_MODE;
ahw->run_post = true;
break;
default:
ahw->run_post = false;
break;
}
qlcnic_83xx_init_rings(adapter);
err = qlcnic_83xx_init_mailbox_work(adapter);
......
......@@ -52,7 +52,7 @@ MODULE_PARM_DESC(auto_fw_reset, "Auto firmware reset (0=disabled, 1=enabled)");
module_param_named(auto_fw_reset, qlcnic_auto_fw_reset, int, 0644);
int qlcnic_load_fw_file;
MODULE_PARM_DESC(load_fw_file, "Load firmware from (0=flash, 1=file)");
MODULE_PARM_DESC(load_fw_file, "Load firmware from (0=flash, 1=file, 2=POST in fast mode, 3= POST in medium mode, 4=POST in slow mode)");
module_param_named(load_fw_file, qlcnic_load_fw_file, int, 0444);
static int qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment