crypto: amlogic - enable working on big endian kernel

On big endian kernel, the GXL crypto driver does not works.
This patch do the necessary modification to permit it to work on BE
kernel (removing bitfield and adds some cpu_to_le32).

Fixes: 48fe583f ("crypto: amlogic - Add crypto accelerator for amlogic GXL")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

drivers/crypto/amlogic/amlogic-gxl-cipher.c

@@ -101,6 +101,7 @@ static int meson_cipher(struct skcipher_request *areq)
 	unsigned int keyivlen, ivsize, offset, tloffset;
 	dma_addr_t phykeyiv;
 	void *backup_iv = NULL, *bkeyiv;
+	__le32 v;
 
 	algt = container_of(alg, struct meson_alg_template, alg.skcipher);
 
@@ -165,11 +166,11 @@ static int meson_cipher(struct skcipher_request *areq)
 		desc = &mc->chanlist[flow].tl[tloffset];
 		memset(desc, 0, sizeof(struct meson_desc));
 		todo = min(keyivlen - eat, 16u);
-		desc->t_src = phykeyiv + i * 16;
-		desc->t_dst = i * 16;
-		desc->len = 16;
-		desc->mode = MODE_KEY;
-		desc->owner = 1;
+		desc->t_src = cpu_to_le32(phykeyiv + i * 16);
+		desc->t_dst = cpu_to_le32(i * 16);
+		v = (MODE_KEY << 20) | DESC_OWN | 16;
+		desc->t_status = cpu_to_le32(v);
+
 		eat += todo;
 		i++;
 		tloffset++;
@@ -208,18 +209,17 @@ static int meson_cipher(struct skcipher_request *areq)
 		desc = &mc->chanlist[flow].tl[tloffset];
 		memset(desc, 0, sizeof(struct meson_desc));
 
-		desc->t_src = sg_dma_address(src_sg);
-		desc->t_dst = sg_dma_address(dst_sg);
+		desc->t_src = cpu_to_le32(sg_dma_address(src_sg));
+		desc->t_dst = cpu_to_le32(sg_dma_address(dst_sg));
 		todo = min(len, sg_dma_len(src_sg));
-		desc->owner = 1;
-		desc->len = todo;
-		desc->mode = op->keymode;
-		desc->op_mode = algt->blockmode;
-		desc->enc = rctx->op_dir;
+		v = (op->keymode << 20) | DESC_OWN | todo | (algt->blockmode << 26);
+		if (rctx->op_dir)
+			v |= DESC_ENCRYPTION;
 		len -= todo;
 
 		if (!sg_next(src_sg))
-			desc->eoc = 1;
+			v |= DESC_LAST;
+		desc->t_status = cpu_to_le32(v);
 		tloffset++;
 		src_sg = sg_next(src_sg);
 		dst_sg = sg_next(dst_sg);

drivers/crypto/amlogic/amlogic-gxl.h

@@ -26,43 +26,34 @@
 
 #define MAXDESC 64
 
+#define DESC_LAST BIT(18)
+#define DESC_ENCRYPTION BIT(28)
+#define DESC_OWN BIT(31)
+
 /*
  * struct meson_desc - Descriptor for DMA operations
  * Note that without datasheet, some are unknown
- * @len:	length of data to operate
- * @irq:	Ignored by hardware
- * @eoc:	End of descriptor
- * @loop:	Unknown
- * @mode:	Type of algorithm (AES, SHA)
- * @begin:	Unknown
- * @end:	Unknown
- * @op_mode:	Blockmode (CBC, ECB)
- * @block:	Unknown
- * @error:	Unknown
- * @owner:	owner of the descriptor, 1 own by HW
+ * @t_status:	Descriptor of the cipher operation (see description below)
  * @t_src:	Physical address of data to read
  * @t_dst:	Physical address of data to write
+ * t_status is segmented like this:
+ * @len:	0-16	length of data to operate
+ * @irq:	17	Ignored by hardware
+ * @eoc:	18	End means the descriptor is the last
+ * @loop:	19	Unknown
+ * @mode:	20-23	Type of algorithm (AES, SHA)
+ * @begin:	24	Unknown
+ * @end:	25	Unknown
+ * @op_mode:	26-27	Blockmode (CBC, ECB)
+ * @enc:	28	0 means decryption, 1 is for encryption
+ * @block:	29	Unknown
+ * @error:	30	Unknown
+ * @owner:	31	owner of the descriptor, 1 own by HW
  */
 struct meson_desc {
-	union {
-		u32 t_status;
-		struct {
-			u32 len:17;
-			u32 irq:1;
-			u32 eoc:1;
-			u32 loop:1;
-			u32 mode:4;
-			u32 begin:1;
-			u32 end:1;
-			u32 op_mode:2;
-			u32 enc:1;
-			u32 block:1;
-			u32 error:1;
-			u32 owner:1;
-		};
-	};
-	u32 t_src;
-	u32 t_dst;
+	__le32 t_status;
+	__le32 t_src;
+	__le32 t_dst;
 };
 
 /*