Commit 3d66c6ba authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'pm+acpi-4.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more power management and ACPI updates from Rafael Wysocki:
 "The second batch of power management and ACPI updates for v4.6.

  Included are fixups on top of the previous PM/ACPI pull request and
  other material that didn't make into it but still should go into 4.6.

  Among other things, there's a fix for an intel_pstate driver issue
  uncovered by recent cpufreq changes, a workaround for a boot hang on
  Skylake-H related to the handling of deep C-states by the platform and
  a PCI/ACPI fix for the handling of IO port resources on non-x86
  architectures plus some new device IDs and similar.

  Specifics:

   - Fix for an intel_pstate driver issue related to the handling of MSR
     updates uncovered by the recent cpufreq rework (Rafael Wysocki).

   - cpufreq core cleanups related to starting governors and frequency
     synchronization during resume from system suspend and a locking fix
     for cpufreq_quick_get() (Rafael Wysocki, Richard Cochran).

   - acpi-cpufreq and powernv cpufreq driver updates (Jisheng Zhang,
     Michael Neuling, Richard Cochran, Shilpasri Bhat).

   - intel_idle driver update preventing some Skylake-H systems from
     hanging during initialization by disabling deep C-states mishandled
     by the platform in the problematic configurations (Len Brown).

   - Intel Xeon Phi Processor x200 support for intel_idle
     (Dasaratharaman Chandramouli).

   - cpuidle menu governor updates to make it always honor PM QoS
     latency constraints (and prevent C1 from being used as the fallback
     C-state on x86 when they are set below its exit latency) and to
     restore the previous behavior to fall back to C1 if the next timer
     event is set far enough in the future that was changed in 4.4 which
     led to an energy consumption regression (Rik van Riel, Rafael
     Wysocki).

   - New device ID for a future AMD UART controller in the ACPI driver
     for AMD SoCs (Wang Hongcheng).

   - Rockchip rk3399 support for the rockchip-io-domain adaptive voltage
     scaling (AVS) driver (David Wu).

   - ACPI PCI resources management fix for the handling of IO space
     resources on architectures where the IO space is memory mapped
     (IA64 and ARM64) broken by the introduction of common ACPI
     resources parsing for PCI host bridges in 4.4 (Lorenzo Pieralisi).

   - Fix for the ACPI backend of the generic device properties API to
     make it parse non-device (data node only) children of an ACPI
     device correctly (Irina Tirdea).

   - Fixes for the handling of global suspend flags (introduced in 4.4)
     during hibernation and resume from it (Lukas Wunner).

   - Support for obtaining configuration information from Device Trees
     in the PM clocks framework (Jon Hunter).

   - ACPI _DSM helper code and devfreq framework cleanups (Colin Ian
     King, Geert Uytterhoeven)"

* tag 'pm+acpi-4.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
  PM / AVS: rockchip-io: add io selectors and supplies for rk3399
  intel_idle: Support for Intel Xeon Phi Processor x200 Product Family
  intel_idle: prevent SKL-H boot failure when C8+C9+C10 enabled
  ACPI / PM: Runtime resume devices when waking from hibernate
  PM / sleep: Clear pm_suspend_global_flags upon hibernate
  cpufreq: governor: Always schedule work on the CPU running update
  cpufreq: Always update current frequency before startig governor
  cpufreq: Introduce cpufreq_update_current_freq()
  cpufreq: Introduce cpufreq_start_governor()
  cpufreq: powernv: Add sysfs attributes to show throttle stats
  cpufreq: acpi-cpufreq: make Intel/AMD MSR access, io port access static
  PCI: ACPI: IA64: fix IO port generic range check
  ACPI / util: cast data to u64 before shifting to fix sign extension
  cpufreq: powernv: Define per_cpu chip pointer to optimize hot-path
  cpuidle: menu: Fall back to polling if next timer event is near
  cpufreq: acpi-cpufreq: Clean up hot plug notifier callback
  intel_pstate: Do not call wrmsrl_on_cpu() with disabled interrupts
  cpufreq: Make cpufreq_quick_get() safe to call
  ACPI / property: fix data node parsing in acpi_get_next_subnode()
  ACPI / APD: Add device HID for future AMD UART controller
  ...
parents 8407ef46 ee0140dc
......@@ -271,3 +271,72 @@ Description: Parameters for the CPU cache attributes
- WriteBack: data is written only to the cache line and
the modified cache line is written to main
memory only when it is replaced
What: /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats
/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/turbo_stat
/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/sub_turbo_stat
/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/unthrottle
/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/powercap
/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/overtemp
/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/supply_fault
/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/overcurrent
/sys/devices/system/cpu/cpuX/cpufreq/throttle_stats/occ_reset
Date: March 2016
Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
Description: POWERNV CPUFreq driver's frequency throttle stats directory and
attributes
'cpuX/cpufreq/throttle_stats' directory contains the CPU frequency
throttle stat attributes for the chip. The throttle stats of a cpu
is common across all the cpus belonging to a chip. Below are the
throttle attributes exported in the 'throttle_stats' directory:
- turbo_stat : This file gives the total number of times the max
frequency is throttled to lower frequency in turbo (at and above
nominal frequency) range of frequencies.
- sub_turbo_stat : This file gives the total number of times the
max frequency is throttled to lower frequency in sub-turbo(below
nominal frequency) range of frequencies.
- unthrottle : This file gives the total number of times the max
frequency is unthrottled after being throttled.
- powercap : This file gives the total number of times the max
frequency is throttled due to 'Power Capping'.
- overtemp : This file gives the total number of times the max
frequency is throttled due to 'CPU Over Temperature'.
- supply_fault : This file gives the total number of times the
max frequency is throttled due to 'Power Supply Failure'.
- overcurrent : This file gives the total number of times the
max frequency is throttled due to 'Overcurrent'.
- occ_reset : This file gives the total number of times the max
frequency is throttled due to 'OCC Reset'.
The sysfs attributes representing different throttle reasons like
powercap, overtemp, supply_fault, overcurrent and occ_reset map to
the reasons provided by OCC firmware for throttling the frequency.
What: /sys/devices/system/cpu/cpufreq/policyX/throttle_stats
/sys/devices/system/cpu/cpufreq/policyX/throttle_stats/turbo_stat
/sys/devices/system/cpu/cpufreq/policyX/throttle_stats/sub_turbo_stat
/sys/devices/system/cpu/cpufreq/policyX/throttle_stats/unthrottle
/sys/devices/system/cpu/cpufreq/policyX/throttle_stats/powercap
/sys/devices/system/cpu/cpufreq/policyX/throttle_stats/overtemp
/sys/devices/system/cpu/cpufreq/policyX/throttle_stats/supply_fault
/sys/devices/system/cpu/cpufreq/policyX/throttle_stats/overcurrent
/sys/devices/system/cpu/cpufreq/policyX/throttle_stats/occ_reset
Date: March 2016
Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
Linux for PowerPC mailing list <linuxppc-dev@ozlabs.org>
Description: POWERNV CPUFreq driver's frequency throttle stats directory and
attributes
'policyX/throttle_stats' directory and all the attributes are same as
the /sys/devices/system/cpu/cpuX/cpufreq/throttle_stats directory and
attributes which give the frequency throttle information of the chip.
......@@ -35,6 +35,8 @@ Required properties:
- "rockchip,rk3288-io-voltage-domain" for rk3288
- "rockchip,rk3368-io-voltage-domain" for rk3368
- "rockchip,rk3368-pmu-io-voltage-domain" for rk3368 pmu-domains
- "rockchip,rk3399-io-voltage-domain" for rk3399
- "rockchip,rk3399-pmu-io-voltage-domain" for rk3399 pmu-domains
- rockchip,grf: phandle to the syscon managing the "general register files"
......@@ -79,6 +81,15 @@ Possible supplies for rk3368 pmu-domains:
- pmu-supply: The supply connected to PMUIO_VDD.
- vop-supply: The supply connected to LCDC_VDD.
Possible supplies for rk3399:
- bt656-supply: The supply connected to APIO2_VDD.
- audio-supply: The supply connected to APIO5_VDD.
- sdmmc-supply: The supply connected to SDMMC0_VDD.
- gpio1830 The supply connected to APIO4_VDD.
Possible supplies for rk3399 pmu-domains:
- pmu1830-supply:The supply connected to PMUIO2_VDD.
Example:
io-domains {
......
......@@ -145,6 +145,7 @@ static const struct acpi_device_id acpi_apd_device_ids[] = {
{ "AMD0010", APD_ADDR(cz_i2c_desc) },
{ "AMDI0010", APD_ADDR(cz_i2c_desc) },
{ "AMD0020", APD_ADDR(cz_uart_desc) },
{ "AMDI0020", APD_ADDR(cz_uart_desc) },
{ "AMD0030", },
#endif
#ifdef CONFIG_ARM64
......
......@@ -816,6 +816,7 @@ struct fwnode_handle *acpi_get_next_subnode(struct device *dev,
next = adev->node.next;
if (next == head) {
child = NULL;
adev = ACPI_COMPANION(dev);
goto nondev;
}
adev = list_entry(next, struct acpi_device, node);
......
......@@ -27,8 +27,20 @@
#ifdef CONFIG_X86
#define valid_IRQ(i) (((i) != 0) && ((i) != 2))
static inline bool acpi_iospace_resource_valid(struct resource *res)
{
/* On X86 IO space is limited to the [0 - 64K] IO port range */
return res->end < 0x10003;
}
#else
#define valid_IRQ(i) (true)
/*
* ACPI IO descriptors on arches other than X86 contain MMIO CPU physical
* addresses mapping IO space in CPU physical address space, IO space
* resources can be placed anywhere in the 64-bit physical address space.
*/
static inline bool
acpi_iospace_resource_valid(struct resource *res) { return true; }
#endif
static bool acpi_dev_resource_len_valid(u64 start, u64 end, u64 len, bool io)
......@@ -127,7 +139,7 @@ static void acpi_dev_ioresource_flags(struct resource *res, u64 len,
if (!acpi_dev_resource_len_valid(res->start, res->end, len, true))
res->flags |= IORESOURCE_DISABLED | IORESOURCE_UNSET;
if (res->end >= 0x10003)
if (!acpi_iospace_resource_valid(res))
res->flags |= IORESOURCE_DISABLED | IORESOURCE_UNSET;
if (io_decode == ACPI_DECODE_16)
......
......@@ -748,6 +748,7 @@ static int acpi_hibernation_enter(void)
static void acpi_hibernation_leave(void)
{
pm_set_resume_via_firmware();
/*
* If ACPI is not enabled by the BIOS and the boot kernel, we need to
* enable it here.
......
......@@ -692,7 +692,7 @@ bool acpi_check_dsm(acpi_handle handle, const u8 *uuid, int rev, u64 funcs)
mask = obj->integer.value;
else if (obj->type == ACPI_TYPE_BUFFER)
for (i = 0; i < obj->buffer.length && i < 8; i++)
mask |= (((u8)obj->buffer.pointer[i]) << (i * 8));
mask |= (((u64)obj->buffer.pointer[i]) << (i * 8));
ACPI_FREE(obj);
/*
......
......@@ -137,6 +137,62 @@ int pm_clk_add_clk(struct device *dev, struct clk *clk)
return __pm_clk_add(dev, NULL, clk);
}
/**
* of_pm_clk_add_clks - Start using device clock(s) for power management.
* @dev: Device whose clock(s) is going to be used for power management.
*
* Add a series of clocks described in the 'clocks' device-tree node for
* a device to the list of clocks used for the power management of @dev.
* On success, returns the number of clocks added. Returns a negative
* error code if there are no clocks in the device node for the device
* or if adding a clock fails.
*/
int of_pm_clk_add_clks(struct device *dev)
{
struct clk **clks;
unsigned int i, count;
int ret;
if (!dev || !dev->of_node)
return -EINVAL;
count = of_count_phandle_with_args(dev->of_node, "clocks",
"#clock-cells");
if (count == 0)
return -ENODEV;
clks = kcalloc(count, sizeof(*clks), GFP_KERNEL);
if (!clks)
return -ENOMEM;
for (i = 0; i < count; i++) {
clks[i] = of_clk_get(dev->of_node, i);
if (IS_ERR(clks[i])) {
ret = PTR_ERR(clks[i]);
goto error;
}
ret = pm_clk_add_clk(dev, clks[i]);
if (ret) {
clk_put(clks[i]);
goto error;
}
}
kfree(clks);
return i;
error:
while (i--)
pm_clk_remove_clk(dev, clks[i]);
kfree(clks);
return ret;
}
/**
* __pm_clk_remove - Destroy PM clock entry.
* @ce: PM clock entry to destroy.
......@@ -197,6 +253,39 @@ void pm_clk_remove(struct device *dev, const char *con_id)
__pm_clk_remove(ce);
}
/**
* pm_clk_remove_clk - Stop using a device clock for power management.
* @dev: Device whose clock should not be used for PM any more.
* @clk: Clock pointer
*
* Remove the clock pointed to by @clk from the list of clocks used for
* the power management of @dev.
*/
void pm_clk_remove_clk(struct device *dev, struct clk *clk)
{
struct pm_subsys_data *psd = dev_to_psd(dev);
struct pm_clock_entry *ce;
if (!psd || !clk)
return;
spin_lock_irq(&psd->lock);
list_for_each_entry(ce, &psd->clock_list, node) {
if (clk == ce->clk)
goto remove;
}
spin_unlock_irq(&psd->lock);
return;
remove:
list_del(&ce->node);
spin_unlock_irq(&psd->lock);
__pm_clk_remove(ce);
}
/**
* pm_clk_init - Initialize a device's list of power management clocks.
* @dev: Device to initialize the list of PM clocks for.
......
......@@ -245,7 +245,7 @@ static unsigned extract_freq(u32 val, struct acpi_cpufreq_data *data)
}
}
u32 cpu_freq_read_intel(struct acpi_pct_register *not_used)
static u32 cpu_freq_read_intel(struct acpi_pct_register *not_used)
{
u32 val, dummy;
......@@ -253,7 +253,7 @@ u32 cpu_freq_read_intel(struct acpi_pct_register *not_used)
return val;
}
void cpu_freq_write_intel(struct acpi_pct_register *not_used, u32 val)
static void cpu_freq_write_intel(struct acpi_pct_register *not_used, u32 val)
{
u32 lo, hi;
......@@ -262,7 +262,7 @@ void cpu_freq_write_intel(struct acpi_pct_register *not_used, u32 val)
wrmsr(MSR_IA32_PERF_CTL, lo, hi);
}
u32 cpu_freq_read_amd(struct acpi_pct_register *not_used)
static u32 cpu_freq_read_amd(struct acpi_pct_register *not_used)
{
u32 val, dummy;
......@@ -270,12 +270,12 @@ u32 cpu_freq_read_amd(struct acpi_pct_register *not_used)
return val;
}
void cpu_freq_write_amd(struct acpi_pct_register *not_used, u32 val)
static void cpu_freq_write_amd(struct acpi_pct_register *not_used, u32 val)
{
wrmsr(MSR_AMD_PERF_CTL, val, 0);
}
u32 cpu_freq_read_io(struct acpi_pct_register *reg)
static u32 cpu_freq_read_io(struct acpi_pct_register *reg)
{
u32 val;
......@@ -283,7 +283,7 @@ u32 cpu_freq_read_io(struct acpi_pct_register *reg)
return val;
}
void cpu_freq_write_io(struct acpi_pct_register *reg, u32 val)
static void cpu_freq_write_io(struct acpi_pct_register *reg, u32 val)
{
acpi_os_write_port(reg->address, val, reg->bit_width);
}
......@@ -514,8 +514,10 @@ static int boost_notify(struct notifier_block *nb, unsigned long action,
*/
switch (action) {
case CPU_UP_PREPARE:
case CPU_UP_PREPARE_FROZEN:
case CPU_DOWN_FAILED:
case CPU_DOWN_FAILED_FROZEN:
case CPU_ONLINE:
case CPU_ONLINE_FROZEN:
boost_set_msrs(acpi_cpufreq_driver.boost_enabled, cpumask);
break;
......
......@@ -76,6 +76,7 @@ static inline bool has_target(void)
/* internal prototypes */
static int cpufreq_governor(struct cpufreq_policy *policy, unsigned int event);
static unsigned int __cpufreq_get(struct cpufreq_policy *policy);
static int cpufreq_start_governor(struct cpufreq_policy *policy);
/**
* Two notifier lists: the "policy" list is involved in the
......@@ -964,10 +965,7 @@ static int cpufreq_add_policy_cpu(struct cpufreq_policy *policy, unsigned int cp
cpumask_set_cpu(cpu, policy->cpus);
if (has_target()) {
ret = cpufreq_governor(policy, CPUFREQ_GOV_START);
if (!ret)
ret = cpufreq_governor(policy, CPUFREQ_GOV_LIMITS);
ret = cpufreq_start_governor(policy);
if (ret)
pr_err("%s: Failed to start governor\n", __func__);
}
......@@ -1308,10 +1306,7 @@ static void cpufreq_offline(unsigned int cpu)
/* Start governor again for active policy */
if (!policy_is_inactive(policy)) {
if (has_target()) {
ret = cpufreq_governor(policy, CPUFREQ_GOV_START);
if (!ret)
ret = cpufreq_governor(policy, CPUFREQ_GOV_LIMITS);
ret = cpufreq_start_governor(policy);
if (ret)
pr_err("%s: Failed to start governor\n", __func__);
}
......@@ -1401,9 +1396,17 @@ unsigned int cpufreq_quick_get(unsigned int cpu)
{
struct cpufreq_policy *policy;
unsigned int ret_freq = 0;
unsigned long flags;
if (cpufreq_driver && cpufreq_driver->setpolicy && cpufreq_driver->get)
return cpufreq_driver->get(cpu);
read_lock_irqsave(&cpufreq_driver_lock, flags);
if (cpufreq_driver && cpufreq_driver->setpolicy && cpufreq_driver->get) {
ret_freq = cpufreq_driver->get(cpu);
read_unlock_irqrestore(&cpufreq_driver_lock, flags);
return ret_freq;
}
read_unlock_irqrestore(&cpufreq_driver_lock, flags);
policy = cpufreq_cpu_get(cpu);
if (policy) {
......@@ -1484,6 +1487,24 @@ unsigned int cpufreq_get(unsigned int cpu)
}
EXPORT_SYMBOL(cpufreq_get);
static unsigned int cpufreq_update_current_freq(struct cpufreq_policy *policy)
{
unsigned int new_freq;
new_freq = cpufreq_driver->get(policy->cpu);
if (!new_freq)
return 0;
if (!policy->cur) {
pr_debug("cpufreq: Driver did not initialize current freq\n");
policy->cur = new_freq;
} else if (policy->cur != new_freq && has_target()) {
cpufreq_out_of_sync(policy, new_freq);
}
return new_freq;
}
static struct subsys_interface cpufreq_interface = {
.name = "cpufreq",
.subsys = &cpu_subsys,
......@@ -1583,9 +1604,7 @@ void cpufreq_resume(void)
policy);
} else {
down_write(&policy->rwsem);
ret = cpufreq_governor(policy, CPUFREQ_GOV_START);
if (!ret)
cpufreq_governor(policy, CPUFREQ_GOV_LIMITS);
ret = cpufreq_start_governor(policy);
up_write(&policy->rwsem);
if (ret)
......@@ -1593,17 +1612,6 @@ void cpufreq_resume(void)
__func__, policy);
}
}
/*
* schedule call cpufreq_update_policy() for first-online CPU, as that
* wouldn't be hotplugged-out on suspend. It will verify that the
* current freq is in sync with what we believe it to be.
*/
policy = cpufreq_cpu_get_raw(cpumask_first(cpu_online_mask));
if (WARN_ON(!policy))
return;
schedule_work(&policy->update);
}
/**
......@@ -1927,6 +1935,17 @@ static int cpufreq_governor(struct cpufreq_policy *policy, unsigned int event)
return ret;
}
static int cpufreq_start_governor(struct cpufreq_policy *policy)
{
int ret;
if (cpufreq_driver->get && !cpufreq_driver->setpolicy)
cpufreq_update_current_freq(policy);
ret = cpufreq_governor(policy, CPUFREQ_GOV_START);
return ret ? ret : cpufreq_governor(policy, CPUFREQ_GOV_LIMITS);
}
int cpufreq_register_governor(struct cpufreq_governor *governor)
{
int err;
......@@ -2063,8 +2082,10 @@ static int cpufreq_set_policy(struct cpufreq_policy *policy,
return cpufreq_driver->setpolicy(new_policy);
}
if (new_policy->governor == policy->governor)
goto out;
if (new_policy->governor == policy->governor) {
pr_debug("cpufreq: governor limits update\n");
return cpufreq_governor(policy, CPUFREQ_GOV_LIMITS);
}
pr_debug("governor switch\n");
......@@ -2092,10 +2113,11 @@ static int cpufreq_set_policy(struct cpufreq_policy *policy,
policy->governor = new_policy->governor;
ret = cpufreq_governor(policy, CPUFREQ_GOV_POLICY_INIT);
if (!ret) {
ret = cpufreq_governor(policy, CPUFREQ_GOV_START);
if (!ret)
goto out;
ret = cpufreq_start_governor(policy);
if (!ret) {
pr_debug("cpufreq: governor change\n");
return 0;
}
cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT);
}
......@@ -2106,14 +2128,10 @@ static int cpufreq_set_policy(struct cpufreq_policy *policy,
if (cpufreq_governor(policy, CPUFREQ_GOV_POLICY_INIT))
policy->governor = NULL;
else
cpufreq_governor(policy, CPUFREQ_GOV_START);
cpufreq_start_governor(policy);
}
return ret;
out:
pr_debug("governor: change or update limits\n");
return cpufreq_governor(policy, CPUFREQ_GOV_LIMITS);
}
/**
......@@ -2144,19 +2162,11 @@ int cpufreq_update_policy(unsigned int cpu)
* -> ask driver for current freq and notify governors about a change
*/
if (cpufreq_driver->get && !cpufreq_driver->setpolicy) {
new_policy.cur = cpufreq_driver->get(cpu);
new_policy.cur = cpufreq_update_current_freq(policy);
if (WARN_ON(!new_policy.cur)) {
ret = -EIO;
goto unlock;
}
if (!policy->cur) {
pr_debug("Driver did not initialize current freq\n");
policy->cur = new_policy.cur;
} else {
if (policy->cur != new_policy.cur && has_target())
cpufreq_out_of_sync(policy, new_policy.cur);
}
}
ret = cpufreq_set_policy(policy, &new_policy);
......
......@@ -329,7 +329,7 @@ static void dbs_irq_work(struct irq_work *irq_work)
struct policy_dbs_info *policy_dbs;
policy_dbs = container_of(irq_work, struct policy_dbs_info, irq_work);
schedule_work(&policy_dbs->work);
schedule_work_on(smp_processor_id(), &policy_dbs->work);
}
static void dbs_update_util_handler(struct update_util_data *data, u64 time,
......
......@@ -134,7 +134,7 @@ struct pstate_funcs {
int (*get_min)(void);
int (*get_turbo)(void);
int (*get_scaling)(void);
void (*set)(struct cpudata*, int pstate);
u64 (*get_val)(struct cpudata*, int pstate);
void (*get_vid)(struct cpudata *);
int32_t (*get_target_pstate)(struct cpudata *);
};
......@@ -565,7 +565,7 @@ static int atom_get_turbo_pstate(void)
return value & 0x7F;
}
static void atom_set_pstate(struct cpudata *cpudata, int pstate)
static u64 atom_get_val(struct cpudata *cpudata, int pstate)
{
u64 val;
int32_t vid_fp;
......@@ -585,9 +585,7 @@ static void atom_set_pstate(struct cpudata *cpudata, int pstate)
if (pstate > cpudata->pstate.max_pstate)
vid = cpudata->vid.turbo;
val |= vid;
wrmsrl_on_cpu(cpudata->cpu, MSR_IA32_PERF_CTL, val);
return val | vid;
}
static int silvermont_get_scaling(void)
......@@ -711,7 +709,7 @@ static inline int core_get_scaling(void)
return 100000;
}
static void core_set_pstate(struct cpudata *cpudata, int pstate)
static u64 core_get_val(struct cpudata *cpudata, int pstate)
{
u64 val;
......@@ -719,7 +717,7 @@ static void core_set_pstate(struct cpudata *cpudata, int pstate)
if (limits->no_turbo && !limits->turbo_disabled)
val |= (u64)1 << 32;
wrmsrl(MSR_IA32_PERF_CTL, val);
return val;
}
static int knl_get_turbo_pstate(void)
......@@ -750,7 +748,7 @@ static struct cpu_defaults core_params = {
.get_min = core_get_min_pstate,
.get_turbo = core_get_turbo_pstate,
.get_scaling = core_get_scaling,
.set = core_set_pstate,
.get_val = core_get_val,
.get_target_pstate = get_target_pstate_use_performance,
},
};
......@@ -769,7 +767,7 @@ static struct cpu_defaults silvermont_params = {
.get_max_physical = atom_get_max_pstate,
.get_min = atom_get_min_pstate,
.get_turbo = atom_get_turbo_pstate,
.set = atom_set_pstate,
.get_val = atom_get_val,
.get_scaling = silvermont_get_scaling,
.get_vid = atom_get_vid,
.get_target_pstate = get_target_pstate_use_cpu_load,
......@@ -790,7 +788,7 @@ static struct cpu_defaults airmont_params = {
.get_max_physical = atom_get_max_pstate,
.get_min = atom_get_min_pstate,
.get_turbo = atom_get_turbo_pstate,
.set = atom_set_pstate,
.get_val = atom_get_val,
.get_scaling = airmont_get_scaling,
.get_vid = atom_get_vid,
.get_target_pstate = get_target_pstate_use_cpu_load,
......@@ -812,7 +810,7 @@ static struct cpu_defaults knl_params = {
.get_min = core_get_min_pstate,
.get_turbo = knl_get_turbo_pstate,
.get_scaling = core_get_scaling,
.set = core_set_pstate,
.get_val = core_get_val,
.get_target_pstate = get_target_pstate_use_performance,
},
};
......@@ -839,25 +837,24 @@ static void intel_pstate_get_min_max(struct cpudata *cpu, int *min, int *max)
*min = clamp_t(int, min_perf, cpu->pstate.min_pstate, max_perf);
}
static void intel_pstate_set_pstate(struct cpudata *cpu, int pstate, bool force)
static inline void intel_pstate_record_pstate(struct cpudata *cpu, int pstate)
{
int max_perf, min_perf;
if (force) {
update_turbo_state();
intel_pstate_get_min_max(cpu, &min_perf, &max_perf);
pstate = clamp_t(int, pstate, min_perf, max_perf);
if (pstate == cpu->pstate.current_pstate)
return;
}
trace_cpu_frequency(pstate * cpu->pstate.scaling, cpu->cpu);
cpu->pstate.current_pstate = pstate;
}
static void intel_pstate_set_min_pstate(struct cpudata *cpu)
{
int pstate = cpu->pstate.min_pstate;
pstate_funcs.set(cpu, pstate);
intel_pstate_record_pstate(cpu, pstate);
/*
* Generally, there is no guarantee that this code will always run on
* the CPU being updated, so force the register update to run on the
* right CPU.
*/
wrmsrl_on_cpu(cpu->cpu, MSR_IA32_PERF_CTL,
pstate_funcs.get_val(cpu, pstate));
}
static void intel_pstate_get_cpu_pstates(struct cpudata *cpu)
......@@ -870,7 +867,8 @@ static void intel_pstate_get_cpu_pstates(struct cpudata *cpu)
if (pstate_funcs.get_vid)
pstate_funcs.get_vid(cpu);
intel_pstate_set_pstate(cpu, cpu->pstate.min_pstate, false);
intel_pstate_set_min_pstate(cpu);
}
static inline void intel_pstate_calc_busy(struct cpudata *cpu)
......@@ -997,6 +995,21 @@ static inline int32_t get_target_pstate_use_performance(struct cpudata *cpu)
return cpu->pstate.current_pstate - pid_calc(&cpu->pid, core_busy);
}
static inline void intel_pstate_update_pstate(struct cpudata *cpu, int pstate)
{
int max_perf, min_perf;
update_turbo_state();
intel_pstate_get_min_max(cpu, &min_perf, &max_perf);
pstate = clamp_t(int, pstate, min_perf, max_perf);
if (pstate == cpu->pstate.current_pstate)
return;
intel_pstate_record_pstate(cpu, pstate);
wrmsrl(MSR_IA32_PERF_CTL, pstate_funcs.get_val(cpu, pstate));
}
static inline void intel_pstate_adjust_busy_pstate(struct cpudata *cpu)
{
int from, target_pstate;
......@@ -1006,7 +1019,7 @@ static inline void intel_pstate_adjust_busy_pstate(struct cpudata *cpu)
target_pstate = pstate_funcs.get_target_pstate(cpu);
intel_pstate_set_pstate(cpu, target_pstate, true);
intel_pstate_update_pstate(cpu, target_pstate);
sample = &cpu->sample;
trace_pstate_sample(fp_toint(sample->core_pct_busy),
......@@ -1180,7 +1193,7 @@ static void intel_pstate_stop_cpu(struct cpufreq_policy *policy)
if (hwp_active)
return;
intel_pstate_set_pstate(cpu, cpu->pstate.min_pstate, false);
intel_pstate_set_min_pstate(cpu);
}
static int intel_pstate_cpu_init(struct cpufreq_policy *policy)
......@@ -1255,7 +1268,7 @@ static void copy_cpu_funcs(struct pstate_funcs *funcs)
pstate_funcs.get_min = funcs->get_min;
pstate_funcs.get_turbo = funcs->get_turbo;
pstate_funcs.get_scaling = funcs->get_scaling;
pstate_funcs.set = funcs->set;
pstate_funcs.get_val = funcs->get_val;
pstate_funcs.get_vid = funcs->get_vid;
pstate_funcs.get_target_pstate = funcs->get_target_pstate;
......
......@@ -44,7 +44,6 @@
static struct cpufreq_frequency_table powernv_freqs[POWERNV_MAX_PSTATES+1];
static bool rebooting, throttled, occ_reset;
static unsigned int *core_to_chip_map;
static const char * const throttle_reason[] = {
"No throttling",
......@@ -55,6 +54,16 @@ static const char * const throttle_reason[] = {
"OCC Reset"
};
enum throttle_reason_type {
NO_THROTTLE = 0,
POWERCAP,
CPU_OVERTEMP,
POWER_SUPPLY_FAILURE,
OVERCURRENT,
OCC_RESET_THROTTLE,
OCC_MAX_REASON
};
static struct chip {
unsigned int id;
bool throttled;
......@@ -62,9 +71,13 @@ static struct chip {
u8 throttle_reason;
cpumask_t mask;
struct work_struct throttle;
int throttle_turbo;
int throttle_sub_turbo;
int reason[OCC_MAX_REASON];
} *chips;
static int nr_chips;
static DEFINE_PER_CPU(struct chip *, chip_info);
/*
* Note: The set of pstates consists of contiguous integers, the
......@@ -196,6 +209,42 @@ static struct freq_attr *powernv_cpu_freq_attr[] = {
NULL,
};
#define throttle_attr(name, member) \
static ssize_t name##_show(struct cpufreq_policy *policy, char *buf) \
{ \
struct chip *chip = per_cpu(chip_info, policy->cpu); \
\
return sprintf(buf, "%u\n", chip->member); \
} \
\
static struct freq_attr throttle_attr_##name = __ATTR_RO(name) \
throttle_attr(unthrottle, reason[NO_THROTTLE]);
throttle_attr(powercap, reason[POWERCAP]);
throttle_attr(overtemp, reason[CPU_OVERTEMP]);
throttle_attr(supply_fault, reason[POWER_SUPPLY_FAILURE]);
throttle_attr(overcurrent, reason[OVERCURRENT]);
throttle_attr(occ_reset, reason[OCC_RESET_THROTTLE]);
throttle_attr(turbo_stat, throttle_turbo);
throttle_attr(sub_turbo_stat, throttle_sub_turbo);
static struct attribute *throttle_attrs[] = {
&throttle_attr_unthrottle.attr,
&throttle_attr_powercap.attr,
&throttle_attr_overtemp.attr,
&throttle_attr_supply_fault.attr,
&throttle_attr_overcurrent.attr,
&throttle_attr_occ_reset.attr,
&throttle_attr_turbo_stat.attr,
&throttle_attr_sub_turbo_stat.attr,
NULL,
};
static const struct attribute_group throttle_attr_grp = {
.name = "throttle_stats",
.attrs = throttle_attrs,
};
/* Helper routines */
/* Access helpers to power mgt SPR */
......@@ -324,34 +373,35 @@ static inline unsigned int get_nominal_index(void)
static void powernv_cpufreq_throttle_check(void *data)
{
struct chip *chip;
unsigned int cpu = smp_processor_id();
unsigned int chip_id = core_to_chip_map[cpu_core_index_of_thread(cpu)];
unsigned long pmsr;
int pmsr_pmax, i;
int pmsr_pmax;
pmsr = get_pmspr(SPRN_PMSR);
for (i = 0; i < nr_chips; i++)
if (chips[i].id == chip_id)
break;
chip = this_cpu_read(chip_info);
/* Check for Pmax Capping */
pmsr_pmax = (s8)PMSR_MAX(pmsr);
if (pmsr_pmax != powernv_pstate_info.max) {
if (chips[i].throttled)
if (chip->throttled)
goto next;
chips[i].throttled = true;
if (pmsr_pmax < powernv_pstate_info.nominal)
chip->throttled = true;
if (pmsr_pmax < powernv_pstate_info.nominal) {
pr_warn_once("CPU %d on Chip %u has Pmax reduced below nominal frequency (%d < %d)\n",
cpu, chips[i].id, pmsr_pmax,
cpu, chip->id, pmsr_pmax,
powernv_pstate_info.nominal);
trace_powernv_throttle(chips[i].id,
throttle_reason[chips[i].throttle_reason],
chip->throttle_sub_turbo++;
} else {
chip->throttle_turbo++;
}
trace_powernv_throttle(chip->id,
throttle_reason[chip->throttle_reason],
pmsr_pmax);
} else if (chips[i].throttled) {
chips[i].throttled = false;
trace_powernv_throttle(chips[i].id,
throttle_reason[chips[i].throttle_reason],
} else if (chip->throttled) {
chip->throttled = false;
trace_powernv_throttle(chip->id,
throttle_reason[chip->throttle_reason],
pmsr_pmax);
}
......@@ -411,6 +461,21 @@ static int powernv_cpufreq_cpu_init(struct cpufreq_policy *policy)
for (i = 0; i < threads_per_core; i++)
cpumask_set_cpu(base + i, policy->cpus);
if (!policy->driver_data) {
int ret;
ret = sysfs_create_group(&policy->kobj, &throttle_attr_grp);
if (ret) {
pr_info("Failed to create throttle stats directory for cpu %d\n",
policy->cpu);
return ret;
}
/*
* policy->driver_data is used as a flag for one-time
* creation of throttle sysfs files.
*/
policy->driver_data = policy;
}
return cpufreq_table_validate_and_show(policy, powernv_freqs);
}
......@@ -517,8 +582,10 @@ static int powernv_cpufreq_occ_msg(struct notifier_block *nb,
break;
if (omsg.throttle_status >= 0 &&
omsg.throttle_status <= OCC_MAX_THROTTLE_STATUS)
omsg.throttle_status <= OCC_MAX_THROTTLE_STATUS) {
chips[i].throttle_reason = omsg.throttle_status;
chips[i].reason[omsg.throttle_status]++;
}
if (!omsg.throttle_status)
chips[i].restore = true;
......@@ -558,47 +625,34 @@ static int init_chip_info(void)
unsigned int chip[256];
unsigned int cpu, i;
unsigned int prev_chip_id = UINT_MAX;
cpumask_t cpu_mask;
int ret = -ENOMEM;
core_to_chip_map = kcalloc(cpu_nr_cores(), sizeof(unsigned int),
GFP_KERNEL);
if (!core_to_chip_map)
goto out;
cpumask_copy(&cpu_mask, cpu_possible_mask);
for_each_cpu(cpu, &cpu_mask) {
for_each_possible_cpu(cpu) {
unsigned int id = cpu_to_chip_id(cpu);
if (prev_chip_id != id) {
prev_chip_id = id;
chip[nr_chips++] = id;
}
core_to_chip_map[cpu_core_index_of_thread(cpu)] = id;
cpumask_andnot(&cpu_mask, &cpu_mask, cpu_sibling_mask(cpu));
}
chips = kcalloc(nr_chips, sizeof(struct chip), GFP_KERNEL);
if (!chips)
goto free_chip_map;
return -ENOMEM;
for (i = 0; i < nr_chips; i++) {
chips[i].id = chip[i];
cpumask_copy(&chips[i].mask, cpumask_of_node(chip[i]));
INIT_WORK(&chips[i].throttle, powernv_cpufreq_work_fn);
for_each_cpu(cpu, &chips[i].mask)
per_cpu(chip_info, cpu) = &chips[i];
}
return 0;
free_chip_map:
kfree(core_to_chip_map);
out:
return ret;
}
static inline void clean_chip_info(void)
{
kfree(chips);
kfree(core_to_chip_map);
}
static inline void unregister_all_notifiers(void)
......
......@@ -196,7 +196,7 @@ static void menu_update(struct cpuidle_driver *drv, struct cpuidle_device *dev);
* of points is below a threshold. If it is... then use the
* average of these 8 points as the estimated value.
*/
static void get_typical_interval(struct menu_device *data)
static unsigned int get_typical_interval(struct menu_device *data)
{
int i, divisor;
unsigned int max, thresh, avg;
......@@ -253,9 +253,7 @@ static void get_typical_interval(struct menu_device *data)
if (likely(variance <= U64_MAX/36)) {
if ((((u64)avg*avg > variance*36) && (divisor * 4 >= INTERVALS * 3))
|| variance <= 400) {
if (data->next_timer_us > avg)
data->predicted_us = avg;
return;
return avg;
}
}
......@@ -269,7 +267,7 @@ static void get_typical_interval(struct menu_device *data)
* with sporadic activity with a bunch of short pauses.
*/
if ((divisor * 4) <= INTERVALS * 3)
return;
return UINT_MAX;
thresh = max - 1;
goto again;
......@@ -286,6 +284,7 @@ static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev)
int latency_req = pm_qos_request(PM_QOS_CPU_DMA_LATENCY);
int i;
unsigned int interactivity_req;
unsigned int expected_interval;
unsigned long nr_iowaiters, cpu_load;
if (data->needs_update) {
......@@ -312,31 +311,42 @@ static int menu_select(struct cpuidle_driver *drv, struct cpuidle_device *dev)
data->correction_factor[data->bucket],
RESOLUTION * DECAY);
get_typical_interval(data);
/*
* Performance multiplier defines a minimum predicted idle
* duration / latency ratio. Adjust the latency limit if
* necessary.
*/
interactivity_req = data->predicted_us / performance_multiplier(nr_iowaiters, cpu_load);
if (latency_req > interactivity_req)
latency_req = interactivity_req;
expected_interval = get_typical_interval(data);
expected_interval = min(expected_interval, data->next_timer_us);
if (CPUIDLE_DRIVER_STATE_START > 0) {
data->last_state_idx = CPUIDLE_DRIVER_STATE_START - 1;
struct cpuidle_state *s = &drv->states[CPUIDLE_DRIVER_STATE_START];
unsigned int polling_threshold;
/*
* We want to default to C1 (hlt), not to busy polling
* unless the timer is happening really really soon.
* unless the timer is happening really really soon, or
* C1's exit latency exceeds the user configured limit.
*/
if (interactivity_req > 20 &&
!drv->states[CPUIDLE_DRIVER_STATE_START].disabled &&
dev->states_usage[CPUIDLE_DRIVER_STATE_START].disable == 0)
polling_threshold = max_t(unsigned int, 20, s->target_residency);
if (data->next_timer_us > polling_threshold &&
latency_req > s->exit_latency && !s->disabled &&
!dev->states_usage[CPUIDLE_DRIVER_STATE_START].disable)
data->last_state_idx = CPUIDLE_DRIVER_STATE_START;
else
data->last_state_idx = CPUIDLE_DRIVER_STATE_START - 1;
} else {
data->last_state_idx = CPUIDLE_DRIVER_STATE_START;
}
/*
* Use the lowest expected idle interval to pick the idle state.
*/
data->predicted_us = min(data->predicted_us, expected_interval);
/*
* Use the performance multiplier and the user-configurable
* latency_req to determine the maximum exit latency.
*/
interactivity_req = data->predicted_us / performance_multiplier(nr_iowaiters, cpu_load);
if (latency_req > interactivity_req)
latency_req = interactivity_req;
/*
* Find the idle state with the lowest power while satisfying
* our constraints.
......
......@@ -61,7 +61,7 @@ config DEVFREQ_GOV_USERSPACE
Sets the frequency at the user specified one.
This governor returns the user configured frequency if there
has been an input to /sys/devices/.../power/devfreq_set_freq.
Otherwise, the governor does not change the frequnecy
Otherwise, the governor does not change the frequency
given at the initialization.
comment "DEVFREQ Drivers"
......
......@@ -65,7 +65,7 @@
#include <asm/mwait.h>
#include <asm/msr.h>
#define INTEL_IDLE_VERSION "0.4"
#define INTEL_IDLE_VERSION "0.4.1"
#define PREFIX "intel_idle: "
static struct cpuidle_driver intel_idle_driver = {
......@@ -716,6 +716,26 @@ static struct cpuidle_state avn_cstates[] = {
{
.enter = NULL }
};
static struct cpuidle_state knl_cstates[] = {
{
.name = "C1-KNL",
.desc = "MWAIT 0x00",
.flags = MWAIT2flg(0x00),
.exit_latency = 1,
.target_residency = 2,
.enter = &intel_idle,
.enter_freeze = intel_idle_freeze },
{
.name = "C6-KNL",
.desc = "MWAIT 0x10",
.flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 120,
.target_residency = 500,
.enter = &intel_idle,
.enter_freeze = intel_idle_freeze },
{
.enter = NULL }
};
/**
* intel_idle
......@@ -890,6 +910,10 @@ static const struct idle_cpu idle_cpu_avn = {
.disable_promotion_to_c1e = true,
};
static const struct idle_cpu idle_cpu_knl = {
.state_table = knl_cstates,
};
#define ICPU(model, cpu) \
{ X86_VENDOR_INTEL, 6, model, X86_FEATURE_MWAIT, (unsigned long)&cpu }
......@@ -921,6 +945,7 @@ static const struct x86_cpu_id intel_idle_ids[] __initconst = {
ICPU(0x56, idle_cpu_bdw),
ICPU(0x4e, idle_cpu_skl),
ICPU(0x5e, idle_cpu_skl),
ICPU(0x57, idle_cpu_knl),
{}
};
MODULE_DEVICE_TABLE(x86cpu, intel_idle_ids);
......@@ -994,17 +1019,14 @@ static void intel_idle_cpuidle_devices_uninit(void)
}
/*
* intel_idle_state_table_update()
* ivt_idle_state_table_update(void)
*
* Update the default state_table for this CPU-id
*
* Currently used to access tuned IVT multi-socket targets
* Tune IVT multi-socket targets
* Assumption: num_sockets == (max_package_num + 1)
*/
void intel_idle_state_table_update(void)
static void ivt_idle_state_table_update(void)
{
/* IVT uses a different table for 1-2, 3-4, and > 4 sockets */
if (boot_cpu_data.x86_model == 0x3e) { /* IVT */
int cpu, package_num, num_sockets = 1;
for_each_online_cpu(cpu) {
......@@ -1021,9 +1043,68 @@ void intel_idle_state_table_update(void)
if (num_sockets > 2)
cpuidle_state_table = ivt_cstates_4s;
/* else, 1 and 2 socket systems use default ivt_cstates */
}
}
/*
* sklh_idle_state_table_update(void)
*
* On SKL-H (model 0x5e) disable C8 and C9 if:
* C10 is enabled and SGX disabled
*/
static void sklh_idle_state_table_update(void)
{
unsigned long long msr;
unsigned int eax, ebx, ecx, edx;
/* if PC10 disabled via cmdline intel_idle.max_cstate=7 or shallower */
if (max_cstate <= 7)
return;
/* if PC10 not present in CPUID.MWAIT.EDX */
if ((mwait_substates & (0xF << 28)) == 0)
return;
rdmsrl(MSR_NHM_SNB_PKG_CST_CFG_CTL, msr);
/* PC10 is not enabled in PKG C-state limit */
if ((msr & 0xF) != 8)
return;
ecx = 0;
cpuid(7, &eax, &ebx, &ecx, &edx);
/* if SGX is present */
if (ebx & (1 << 2)) {
rdmsrl(MSR_IA32_FEATURE_CONTROL, msr);
/* if SGX is enabled */
if (msr & (1 << 18))
return;
}
skl_cstates[5].disabled = 1; /* C8-SKL */
skl_cstates[6].disabled = 1; /* C9-SKL */
}
/*
* intel_idle_state_table_update()
*
* Update the default state_table for this CPU-id
*/
static void intel_idle_state_table_update(void)
{
switch (boot_cpu_data.x86_model) {
case 0x3e: /* IVT */
ivt_idle_state_table_update();
break;
case 0x5e: /* SKL-H */
sklh_idle_state_table_update();
break;
}
}
/*
......@@ -1063,6 +1144,14 @@ static int __init intel_idle_cpuidle_driver_init(void)
if (num_substates == 0)
continue;
/* if state marked as disabled, skip it */
if (cpuidle_state_table[cstate].disabled != 0) {
pr_debug(PREFIX "state %s is disabled",
cpuidle_state_table[cstate].name);
continue;
}
if (((mwait_cstate + 1) > 2) &&
!boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
mark_tsc_unstable("TSC halts in idle"
......
......@@ -47,6 +47,10 @@
#define RK3368_SOC_CON15_FLASH0 BIT(14)
#define RK3368_SOC_FLASH_SUPPLY_NUM 2
#define RK3399_PMUGRF_CON0 0x180
#define RK3399_PMUGRF_CON0_VSEL BIT(8)
#define RK3399_PMUGRF_VSEL_SUPPLY_NUM 9
struct rockchip_iodomain;
/**
......@@ -181,6 +185,25 @@ static void rk3368_iodomain_init(struct rockchip_iodomain *iod)
dev_warn(iod->dev, "couldn't update flash0 ctrl\n");
}
static void rk3399_pmu_iodomain_init(struct rockchip_iodomain *iod)
{
int ret;
u32 val;
/* if no pmu io supply we should leave things alone */
if (!iod->supplies[RK3399_PMUGRF_VSEL_SUPPLY_NUM].reg)
return;
/*
* set pmu io iodomain to also use this framework
* instead of a special gpio.
*/
val = RK3399_PMUGRF_CON0_VSEL | (RK3399_PMUGRF_CON0_VSEL << 16);
ret = regmap_write(iod->grf, RK3399_PMUGRF_CON0, val);
if (ret < 0)
dev_warn(iod->dev, "couldn't update pmu io iodomain ctrl\n");
}
/*
* On the rk3188 the io-domains are handled by a shared register with the
* lower 8 bits being still being continuing drive-strength settings.
......@@ -252,6 +275,33 @@ static const struct rockchip_iodomain_soc_data soc_data_rk3368_pmu = {
},
};
static const struct rockchip_iodomain_soc_data soc_data_rk3399 = {
.grf_offset = 0xe640,
.supply_names = {
"bt656", /* APIO2_VDD */
"audio", /* APIO5_VDD */
"sdmmc", /* SDMMC0_VDD */
"gpio1830", /* APIO4_VDD */
},
};
static const struct rockchip_iodomain_soc_data soc_data_rk3399_pmu = {
.grf_offset = 0x180,
.supply_names = {
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
"pmu1830", /* PMUIO2_VDD */
},
.init = rk3399_pmu_iodomain_init,
};
static const struct of_device_id rockchip_iodomain_match[] = {
{
.compatible = "rockchip,rk3188-io-voltage-domain",
......@@ -269,6 +319,14 @@ static const struct of_device_id rockchip_iodomain_match[] = {
.compatible = "rockchip,rk3368-pmu-io-voltage-domain",
.data = (void *)&soc_data_rk3368_pmu
},
{
.compatible = "rockchip,rk3399-io-voltage-domain",
.data = (void *)&soc_data_rk3399
},
{
.compatible = "rockchip,rk3399-pmu-io-voltage-domain",
.data = (void *)&soc_data_rk3399_pmu
},
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, rockchip_iodomain_match);
......
......@@ -42,7 +42,9 @@ extern int pm_clk_create(struct device *dev);
extern void pm_clk_destroy(struct device *dev);
extern int pm_clk_add(struct device *dev, const char *con_id);
extern int pm_clk_add_clk(struct device *dev, struct clk *clk);
extern int of_pm_clk_add_clks(struct device *dev);
extern void pm_clk_remove(struct device *dev, const char *con_id);
extern void pm_clk_remove_clk(struct device *dev, struct clk *clk);
extern int pm_clk_suspend(struct device *dev);
extern int pm_clk_resume(struct device *dev);
#else
......@@ -69,11 +71,18 @@ static inline int pm_clk_add_clk(struct device *dev, struct clk *clk)
{
return -EINVAL;
}
static inline int of_pm_clk_add_clks(struct device *dev)
{
return -EINVAL;
}
static inline void pm_clk_remove(struct device *dev, const char *con_id)
{
}
#define pm_clk_suspend NULL
#define pm_clk_resume NULL
static inline void pm_clk_remove_clk(struct device *dev, struct clk *clk)
{
}
#endif
#ifdef CONFIG_HAVE_CLK
......
......@@ -339,6 +339,7 @@ int hibernation_snapshot(int platform_mode)
pm_message_t msg;
int error;
pm_suspend_clear_flags();
error = platform_begin(platform_mode);
if (error)
goto Close;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment