Skip to content

L
linux
Commit 3d963f5b authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge refs/heads/upstream from master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

parents 5be1d85c e1393456
Expand all Show whitespace changes
Inline Side-by-side
Showing with 8104 additions and 3720 deletions
Documentation/networking/phy.txt 0 → 100644
View file @ 3d963f5b
This diff is collapsed.
drivers/net/Kconfig
View file @ 3d963f5b
......@@ -131,6 +131,8 @@ config NET_SB1000
source "drivers/net/arcnet/Kconfig"
source "drivers/net/phy/Kconfig"
#
# Ethernet
#
......
drivers/net/Makefile
View file @ 3d963f5b
......@@ -65,6 +65,7 @@ obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
#
obj-$(CONFIG_MII) += mii.o
obj-$(CONFIG_PHYLIB) += phy/
obj-$(CONFIG_SUNDANCE) += sundance.o
obj-$(CONFIG_HAMACHI) += hamachi.o
......
drivers/net/Space.c
View file @ 3d963f5b
......@@ -87,7 +87,6 @@ extern struct net_device *mvme147lance_probe(int unit);
extern struct net_device *tc515_probe(int unit);
extern struct net_device *lance_probe(int unit);
extern struct net_device *mace_probe(int unit);
extern struct net_device *macsonic_probe(int unit);
extern struct net_device *mac8390_probe(int unit);
extern struct net_device *mac89x0_probe(int unit);
extern struct net_device *mc32_probe(int unit);
......@@ -284,9 +283,6 @@ static struct devprobe2 m68k_probes[] __initdata = {
#ifdef CONFIG_MACMACE /* Mac 68k Quadra AV builtin Ethernet */
{mace_probe, 0},
#endif
#ifdef CONFIG_MACSONIC /* Mac SONIC-based Ethernet of all sorts */
{macsonic_probe, 0},
#endif
#ifdef CONFIG_MAC8390 /* NuBus NS8390-based cards */
{mac8390_probe, 0},
#endif
......@@ -318,17 +314,9 @@ static void __init ethif_probe2(int unit)
#ifdef CONFIG_TR
/* Token-ring device probe */
extern int ibmtr_probe_card(struct net_device *);
extern struct net_device *sk_isa_probe(int unit);
extern struct net_device *proteon_probe(int unit);
extern struct net_device *smctr_probe(int unit);
static struct devprobe2 tr_probes2[] __initdata = {
#ifdef CONFIG_SKISA
{sk_isa_probe, 0},
#endif
#ifdef CONFIG_PROTEON
{proteon_probe, 0},
#endif
#ifdef CONFIG_SMCTR
{smctr_probe, 0},
#endif
......
drivers/net/bonding/bond_alb.c
View file @ 3d963f5b
......@@ -1106,18 +1106,13 @@ static int alb_handle_addr_collision_on_attach(struct bonding *bond, struct slav
}
}
if (found) {
/* a slave was found that is using the mac address
* of the new slave
*/
printk(KERN_ERR DRV_NAME
": Error: the hw address of slave %s is not "
"unique - cannot enslave it!",
slave->dev->name);
return -EINVAL;
}
if (!found)
return 0;
/* Try setting slave mac to bond address and fall-through
to code handling that situation below... */
alb_set_slave_mac_addr(slave, bond->dev->dev_addr,
bond->alb_info.rlb_enabled);
}
/* The slave's address is equal to the address of the bond.
......
drivers/net/bonding/bond_main.c
View file @ 3d963f5b
......@@ -1604,6 +1604,44 @@ static int bond_sethwaddr(struct net_device *bond_dev, struct net_device *slave_
return 0;
}
#define BOND_INTERSECT_FEATURES \
(NETIF_F_SG|NETIF_F_IP_CSUM|NETIF_F_NO_CSUM|NETIF_F_HW_CSUM)
/*
* Compute the features available to the bonding device by
* intersection of all of the slave devices' BOND_INTERSECT_FEATURES.
* Call this after attaching or detaching a slave to update the
* bond's features.
*/
static int bond_compute_features(struct bonding *bond)
{
int i;
struct slave *slave;
struct net_device *bond_dev = bond->dev;
int features = bond->bond_features;
bond_for_each_slave(bond, slave, i) {
struct net_device * slave_dev = slave->dev;
if (i == 0) {
features |= BOND_INTERSECT_FEATURES;
}
features &=
~(~slave_dev->features & BOND_INTERSECT_FEATURES);
}
/* turn off NETIF_F_SG if we need a csum and h/w can't do it */
if ((features & NETIF_F_SG) &&
!(features & (NETIF_F_IP_CSUM |
NETIF_F_NO_CSUM |
NETIF_F_HW_CSUM))) {
features &= ~NETIF_F_SG;
}
bond_dev->features = features;
return 0;
}
/* enslave device <slave> to bond device <master> */
static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
{
......@@ -1811,6 +1849,8 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de
new_slave->delay = 0;
new_slave->link_failure_count = 0;
bond_compute_features(bond);
if (bond->params.miimon && !bond->params.use_carrier) {
link_reporting = bond_check_dev_link(bond, slave_dev, 1);
......@@ -2100,6 +2140,8 @@ static int bond_release(struct net_device *bond_dev, struct net_device *slave_de
/* release the slave from its bond */
bond_detach_slave(bond, slave);
bond_compute_features(bond);
if (bond->primary_slave == slave) {
bond->primary_slave = NULL;
}
......@@ -2243,6 +2285,8 @@ static int bond_release_all(struct net_device *bond_dev)
bond_alb_deinit_slave(bond, slave);
}
bond_compute_features(bond);
/* now that the slave is detached, unlock and perform
* all the undo steps that should not be called from
* within a lock.
......@@ -3588,6 +3632,7 @@ static int bond_master_netdev_event(unsigned long event, struct net_device *bond
static int bond_slave_netdev_event(unsigned long event, struct net_device *slave_dev)
{
struct net_device *bond_dev = slave_dev->master;
struct bonding *bond = bond_dev->priv;
switch (event) {
case NETDEV_UNREGISTER:
......@@ -3626,6 +3671,9 @@ static int bond_slave_netdev_event(unsigned long event, struct net_device *slave
* TODO: handle changing the primary's name
*/
break;
case NETDEV_FEAT_CHANGE:
bond_compute_features(bond);
break;
default:
break;
}
......@@ -4526,6 +4574,11 @@ static inline void bond_set_mode_ops(struct bonding *bond, int mode)
}
}
static struct ethtool_ops bond_ethtool_ops = {
.get_tx_csum = ethtool_op_get_tx_csum,
.get_sg = ethtool_op_get_sg,
};
/*
* Does not allocate but creates a /proc entry.
* Allowed to fail.
......@@ -4555,6 +4608,7 @@ static int __init bond_init(struct net_device *bond_dev, struct bond_params *par
bond_dev->stop = bond_close;
bond_dev->get_stats = bond_get_stats;
bond_dev->do_ioctl = bond_do_ioctl;
bond_dev->ethtool_ops = &bond_ethtool_ops;
bond_dev->set_multicast_list = bond_set_multicast_list;
bond_dev->change_mtu = bond_change_mtu;
bond_dev->set_mac_address = bond_set_mac_address;
......@@ -4591,6 +4645,8 @@ static int __init bond_init(struct net_device *bond_dev, struct bond_params *par
NETIF_F_HW_VLAN_RX |
NETIF_F_HW_VLAN_FILTER);
bond->bond_features = bond_dev->features;
#ifdef CONFIG_PROC_FS
bond_create_proc_entry(bond);
#endif
......
drivers/net/bonding/bonding.h
View file @ 3d963f5b
......@@ -211,6 +211,9 @@ struct bonding {
struct bond_params params;
struct list_head vlan_list;
struct vlan_group *vlgrp;
/* the features the bonding device supports, independently
* of any slaves */
int bond_features;
};
/**
......
drivers/net/e1000/e1000_main.c
View file @ 3d963f5b
......@@ -2767,7 +2767,7 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter)
" next_to_use <%x>\n"
" next_to_clean <%x>\n"
"buffer_info[next_to_clean]\n"
" dma <%zx>\n"
" dma <%llx>\n"
" time_stamp <%lx>\n"
" next_to_watch <%x>\n"
" jiffies <%lx>\n"
......@@ -2776,7 +2776,7 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter)
E1000_READ_REG(&adapter->hw, TDT),
tx_ring->next_to_use,
i,
tx_ring->buffer_info[i].dma,
(unsigned long long)tx_ring->buffer_info[i].dma,
tx_ring->buffer_info[i].time_stamp,
eop,
jiffies,
......
drivers/net/eepro100.c
View file @ 3d963f5b
......@@ -1263,7 +1263,7 @@ speedo_init_rx_ring(struct net_device *dev)
for (i = 0; i < RX_RING_SIZE; i++) {
struct sk_buff *skb;
skb = dev_alloc_skb(PKT_BUF_SZ + sizeof(struct RxFD));
/* XXX: do we really want to call this before the NULL check? --hch */
if (skb)
rx_align(skb); /* Align IP on 16 byte boundary */
sp->rx_skbuff[i] = skb;
if (skb == NULL)
......@@ -1654,7 +1654,7 @@ static inline struct RxFD *speedo_rx_alloc(struct net_device *dev, int entry)
struct sk_buff *skb;
/* Get a fresh skbuff to replace the consumed one. */
skb = dev_alloc_skb(PKT_BUF_SZ + sizeof(struct RxFD));
/* XXX: do we really want to call this before the NULL check? --hch */
if (skb)
rx_align(skb); /* Align IP on 16 byte boundary */
sp->rx_skbuff[entry] = skb;
if (skb == NULL) {
......
drivers/net/forcedeth.c
View file @ 3d963f5b
This diff is collapsed.
drivers/net/hamradio/Kconfig
View file @ 3d963f5b
config MKISS
tristate "Serial port KISS driver"
depends on AX25 && BROKEN_ON_SMP
depends on AX25
---help---
KISS is a protocol used for the exchange of data between a computer
and a Terminal Node Controller (a small embedded system commonly
......
drivers/net/hamradio/baycom_epp.c
View file @ 3d963f5b
......@@ -54,6 +54,7 @@
#include <linux/kmod.h>
#include <linux/hdlcdrv.h>
#include <linux/baycom.h>
#include <linux/jiffies.h>
#if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
/* prototypes for ax25_encapsulate and ax25_rebuild_header */
#include <net/ax25.h>
......@@ -287,7 +288,7 @@ static inline void baycom_int_freq(struct baycom_state *bc)
* measure the interrupt frequency
*/
bc->debug_vals.cur_intcnt++;
if ((cur_jiffies - bc->debug_vals.last_jiffies) >= HZ) {
if (time_after_eq(cur_jiffies, bc->debug_vals.last_jiffies + HZ)) {
bc->debug_vals.last_jiffies = cur_jiffies;
bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt;
bc->debug_vals.cur_intcnt = 0;
......
drivers/net/hamradio/baycom_par.c
View file @ 3d963f5b
......@@ -84,6 +84,7 @@
#include <linux/baycom.h>
#include <linux/parport.h>
#include <linux/bitops.h>
#include <linux/jiffies.h>
#include <asm/bug.h>
#include <asm/system.h>
......@@ -165,7 +166,7 @@ static void __inline__ baycom_int_freq(struct baycom_state *bc)
* measure the interrupt frequency
*/
bc->debug_vals.cur_intcnt++;
if ((cur_jiffies - bc->debug_vals.last_jiffies) >= HZ) {
if (time_after_eq(cur_jiffies, bc->debug_vals.last_jiffies + HZ)) {
bc->debug_vals.last_jiffies = cur_jiffies;
bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt;
bc->debug_vals.cur_intcnt = 0;
......
drivers/net/hamradio/baycom_ser_fdx.c
View file @ 3d963f5b
......@@ -79,6 +79,7 @@
#include <asm/io.h>
#include <linux/hdlcdrv.h>
#include <linux/baycom.h>
#include <linux/jiffies.h>
/* --------------------------------------------------------------------- */
......@@ -159,7 +160,7 @@ static inline void baycom_int_freq(struct baycom_state *bc)
* measure the interrupt frequency
*/
bc->debug_vals.cur_intcnt++;
if ((cur_jiffies - bc->debug_vals.last_jiffies) >= HZ) {
if (time_after_eq(cur_jiffies, bc->debug_vals.last_jiffies + HZ)) {
bc->debug_vals.last_jiffies = cur_jiffies;
bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt;
bc->debug_vals.cur_intcnt = 0;
......
drivers/net/hamradio/baycom_ser_hdx.c
View file @ 3d963f5b
......@@ -69,6 +69,7 @@
#include <asm/io.h>
#include <linux/hdlcdrv.h>
#include <linux/baycom.h>
#include <linux/jiffies.h>
/* --------------------------------------------------------------------- */
......@@ -150,7 +151,7 @@ static inline void baycom_int_freq(struct baycom_state *bc)
* measure the interrupt frequency
*/
bc->debug_vals.cur_intcnt++;
if ((cur_jiffies - bc->debug_vals.last_jiffies) >= HZ) {
if (time_after_eq(cur_jiffies, bc->debug_vals.last_jiffies + HZ)) {
bc->debug_vals.last_jiffies = cur_jiffies;
bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt;
bc->debug_vals.cur_intcnt = 0;
......
drivers/net/hamradio/mkiss.c
View file @ 3d963f5b
This diff is collapsed.
drivers/net/ixgb/ixgb.h
View file @ 3d963f5b
......@@ -119,7 +119,7 @@ struct ixgb_adapter;
* so a DMA handle can be stored along with the buffer */
struct ixgb_buffer {
struct sk_buff *skb;
uint64_t dma;
dma_addr_t dma;
unsigned long time_stamp;
uint16_t length;
uint16_t next_to_watch;
......
drivers/net/ixgb/ixgb_ee.c
View file @ 3d963f5b
......@@ -565,24 +565,6 @@ ixgb_get_ee_mac_addr(struct ixgb_hw *hw,
}
}
/******************************************************************************
* return the compatibility flags from EEPROM
*
* hw - Struct containing variables accessed by shared code
*
* Returns:
* compatibility flags if EEPROM contents are valid, 0 otherwise
******************************************************************************/
uint16_t
ixgb_get_ee_compatibility(struct ixgb_hw *hw)
{
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
return (le16_to_cpu(ee_map->compatibility));
return(0);
}
/******************************************************************************
* return the Printed Board Assembly number from EEPROM
......@@ -602,81 +584,6 @@ ixgb_get_ee_pba_number(struct ixgb_hw *hw)
return(0);
}
/******************************************************************************
* return the Initialization Control Word 1 from EEPROM
*
* hw - Struct containing variables accessed by shared code
*
* Returns:
* Initialization Control Word 1 if EEPROM contents are valid, 0 otherwise
******************************************************************************/
uint16_t
ixgb_get_ee_init_ctrl_reg_1(struct ixgb_hw *hw)
{
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
return (le16_to_cpu(ee_map->init_ctrl_reg_1));
return(0);
}
/******************************************************************************
* return the Initialization Control Word 2 from EEPROM
*
* hw - Struct containing variables accessed by shared code
*
* Returns:
* Initialization Control Word 2 if EEPROM contents are valid, 0 otherwise
******************************************************************************/
uint16_t
ixgb_get_ee_init_ctrl_reg_2(struct ixgb_hw *hw)
{
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
return (le16_to_cpu(ee_map->init_ctrl_reg_2));
return(0);
}
/******************************************************************************
* return the Subsystem Id from EEPROM
*
* hw - Struct containing variables accessed by shared code
*
* Returns:
* Subsystem Id if EEPROM contents are valid, 0 otherwise
******************************************************************************/
uint16_t
ixgb_get_ee_subsystem_id(struct ixgb_hw *hw)
{
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
return (le16_to_cpu(ee_map->subsystem_id));
return(0);
}
/******************************************************************************
* return the Sub Vendor Id from EEPROM
*
* hw - Struct containing variables accessed by shared code
*
* Returns:
* Sub Vendor Id if EEPROM contents are valid, 0 otherwise
******************************************************************************/
uint16_t
ixgb_get_ee_subvendor_id(struct ixgb_hw *hw)
{
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
return (le16_to_cpu(ee_map->subvendor_id));
return(0);
}
/******************************************************************************
* return the Device Id from EEPROM
......@@ -694,81 +601,6 @@ ixgb_get_ee_device_id(struct ixgb_hw *hw)
if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
return (le16_to_cpu(ee_map->device_id));
return(0);
}
/******************************************************************************
* return the Vendor Id from EEPROM
*
* hw - Struct containing variables accessed by shared code
*
* Returns:
* Device Id if EEPROM contents are valid, 0 otherwise
******************************************************************************/
uint16_t
ixgb_get_ee_vendor_id(struct ixgb_hw *hw)
{
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
return (le16_to_cpu(ee_map->vendor_id));
return(0);
}
/******************************************************************************
* return the Software Defined Pins Register from EEPROM
*
* hw - Struct containing variables accessed by shared code
*
* Returns:
* SDP Register if EEPROM contents are valid, 0 otherwise
******************************************************************************/
uint16_t
ixgb_get_ee_swdpins_reg(struct ixgb_hw *hw)
{
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
return (le16_to_cpu(ee_map->swdpins_reg));
return(0);
return (0);
}
/******************************************************************************
* return the D3 Power Management Bits from EEPROM
*
* hw - Struct containing variables accessed by shared code
*
* Returns:
* D3 Power Management Bits if EEPROM contents are valid, 0 otherwise
******************************************************************************/
uint8_t
ixgb_get_ee_d3_power(struct ixgb_hw *hw)
{
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
return (le16_to_cpu(ee_map->d3_power));
return(0);
}
/******************************************************************************
* return the D0 Power Management Bits from EEPROM
*
* hw - Struct containing variables accessed by shared code
*
* Returns:
* D0 Power Management Bits if EEPROM contents are valid, 0 otherwise
******************************************************************************/
uint8_t
ixgb_get_ee_d0_power(struct ixgb_hw *hw)
{
struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
return (le16_to_cpu(ee_map->d0_power));
return(0);
}
drivers/net/ixgb/ixgb_ethtool.c
View file @ 3d963f5b
......@@ -98,10 +98,10 @@ static struct ixgb_stats ixgb_gstrings_stats[] = {
static int
ixgb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
{
struct ixgb_adapter *adapter = netdev->priv;
struct ixgb_adapter *adapter = netdev_priv(netdev);
ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
ecmd->advertising = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
ecmd->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_FIBRE);
ecmd->port = PORT_FIBRE;
ecmd->transceiver = XCVR_EXTERNAL;
......@@ -120,7 +120,7 @@ ixgb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
static int
ixgb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
{
struct ixgb_adapter *adapter = netdev->priv;
struct ixgb_adapter *adapter = netdev_priv(netdev);
if(ecmd->autoneg == AUTONEG_ENABLE ||
ecmd->speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL)
......@@ -130,6 +130,12 @@ ixgb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
ixgb_down(adapter, TRUE);
ixgb_reset(adapter);
ixgb_up(adapter);
/* be optimistic about our link, since we were up before */
adapter->link_speed = 10000;
adapter->link_duplex = FULL_DUPLEX;
netif_carrier_on(netdev);
netif_wake_queue(netdev);
} else
ixgb_reset(adapter);
......@@ -140,7 +146,7 @@ static void
ixgb_get_pauseparam(struct net_device *netdev,
struct ethtool_pauseparam *pause)
{
struct ixgb_adapter *adapter = netdev->priv;
struct ixgb_adapter *adapter = netdev_priv(netdev);
struct ixgb_hw *hw = &adapter->hw;
pause->autoneg = AUTONEG_DISABLE;
......@@ -159,7 +165,7 @@ static int
ixgb_set_pauseparam(struct net_device *netdev,
struct ethtool_pauseparam *pause)
{
struct ixgb_adapter *adapter = netdev->priv;
struct ixgb_adapter *adapter = netdev_priv(netdev);
struct ixgb_hw *hw = &adapter->hw;
if(pause->autoneg == AUTONEG_ENABLE)
......@@ -177,6 +183,11 @@ ixgb_set_pauseparam(struct net_device *netdev,
if(netif_running(adapter->netdev)) {
ixgb_down(adapter, TRUE);
ixgb_up(adapter);
/* be optimistic about our link, since we were up before */
adapter->link_speed = 10000;
adapter->link_duplex = FULL_DUPLEX;
netif_carrier_on(netdev);
netif_wake_queue(netdev);
} else
ixgb_reset(adapter);
......@@ -186,19 +197,26 @@ ixgb_set_pauseparam(struct net_device *netdev,
static uint32_t
ixgb_get_rx_csum(struct net_device *netdev)
{
struct ixgb_adapter *adapter = netdev->priv;
struct ixgb_adapter *adapter = netdev_priv(netdev);
return adapter->rx_csum;
}
static int
ixgb_set_rx_csum(struct net_device *netdev, uint32_t data)
{
struct ixgb_adapter *adapter = netdev->priv;
struct ixgb_adapter *adapter = netdev_priv(netdev);
adapter->rx_csum = data;
if(netif_running(netdev)) {
ixgb_down(adapter,TRUE);
ixgb_up(adapter);
/* be optimistic about our link, since we were up before */
adapter->link_speed = 10000;
adapter->link_duplex = FULL_DUPLEX;
netif_carrier_on(netdev);
netif_wake_queue(netdev);
} else
ixgb_reset(adapter);
return 0;
......@@ -246,14 +264,15 @@ static void
ixgb_get_regs(struct net_device *netdev,
struct ethtool_regs *regs, void *p)
{
struct ixgb_adapter *adapter = netdev->priv;
struct ixgb_adapter *adapter = netdev_priv(netdev);
struct ixgb_hw *hw = &adapter->hw;
uint32_t *reg = p;
uint32_t *reg_start = reg;
uint8_t i;
/* the 1 (one) below indicates an attempt at versioning, if the
* interface in ethtool or the driver this 1 should be incremented */
* interface in ethtool or the driver changes, this 1 should be
* incremented */
regs->version = (1<<24) | hw->revision_id << 16 | hw->device_id;
/* General Registers */
......@@ -283,7 +302,8 @@ ixgb_get_regs(struct net_device *netdev,
*reg++ = IXGB_READ_REG(hw, RAIDC); /* 19 */
*reg++ = IXGB_READ_REG(hw, RXCSUM); /* 20 */
for (i = 0; i < IXGB_RAR_ENTRIES; i++) {
/* there are 16 RAR entries in hardware, we only use 3 */
for(i = 0; i < 16; i++) {
*reg++ = IXGB_READ_REG_ARRAY(hw, RAL, (i << 1)); /*21,...,51 */
*reg++ = IXGB_READ_REG_ARRAY(hw, RAH, (i << 1)); /*22,...,52 */
}
......@@ -391,7 +411,7 @@ static int
ixgb_get_eeprom(struct net_device *netdev,
struct ethtool_eeprom *eeprom, uint8_t *bytes)
{
struct ixgb_adapter *adapter = netdev->priv;
struct ixgb_adapter *adapter = netdev_priv(netdev);
struct ixgb_hw *hw = &adapter->hw;
uint16_t *eeprom_buff;
int i, max_len, first_word, last_word;
......@@ -439,7 +459,7 @@ static int
ixgb_set_eeprom(struct net_device *netdev,
struct ethtool_eeprom *eeprom, uint8_t *bytes)
{
struct ixgb_adapter *adapter = netdev->priv;
struct ixgb_adapter *adapter = netdev_priv(netdev);
struct ixgb_hw *hw = &adapter->hw;
uint16_t *eeprom_buff;
void *ptr;
......@@ -497,7 +517,7 @@ static void
ixgb_get_drvinfo(struct net_device *netdev,
struct ethtool_drvinfo *drvinfo)
{
struct ixgb_adapter *adapter = netdev->priv;
struct ixgb_adapter *adapter = netdev_priv(netdev);
strncpy(drvinfo->driver, ixgb_driver_name, 32);
strncpy(drvinfo->version, ixgb_driver_version, 32);
......@@ -512,7 +532,7 @@ static void
ixgb_get_ringparam(struct net_device *netdev,
struct ethtool_ringparam *ring)
{
struct ixgb_adapter *adapter = netdev->priv;
struct ixgb_adapter *adapter = netdev_priv(netdev);
struct ixgb_desc_ring *txdr = &adapter->tx_ring;
struct ixgb_desc_ring *rxdr = &adapter->rx_ring;
......@@ -530,7 +550,7 @@ static int
ixgb_set_ringparam(struct net_device *netdev,
struct ethtool_ringparam *ring)
{
struct ixgb_adapter *adapter = netdev->priv;
struct ixgb_adapter *adapter = netdev_priv(netdev);
struct ixgb_desc_ring *txdr = &adapter->tx_ring;
struct ixgb_desc_ring *rxdr = &adapter->rx_ring;
struct ixgb_desc_ring tx_old, tx_new, rx_old, rx_new;
......@@ -573,6 +593,11 @@ ixgb_set_ringparam(struct net_device *netdev,
adapter->tx_ring = tx_new;
if((err = ixgb_up(adapter)))
return err;
/* be optimistic about our link, since we were up before */
adapter->link_speed = 10000;
adapter->link_duplex = FULL_DUPLEX;
netif_carrier_on(netdev);
netif_wake_queue(netdev);
}
return 0;
......@@ -607,7 +632,7 @@ ixgb_led_blink_callback(unsigned long data)
static int
ixgb_phys_id(struct net_device *netdev, uint32_t data)
{
struct ixgb_adapter *adapter = netdev->priv;
struct ixgb_adapter *adapter = netdev_priv(netdev);
if(!data || data > (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ))
data = (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ);
......@@ -643,7 +668,7 @@ static void
ixgb_get_ethtool_stats(struct net_device *netdev,
struct ethtool_stats *stats, uint64_t *data)
{
struct ixgb_adapter *adapter = netdev->priv;
struct ixgb_adapter *adapter = netdev_priv(netdev);
int i;
ixgb_update_stats(adapter);
......
drivers/net/ixgb/ixgb_hw.h
View file @ 3d963f5b
......@@ -822,17 +822,8 @@ extern void ixgb_clear_vfta(struct ixgb_hw *hw);
/* Access functions to eeprom data */
void ixgb_get_ee_mac_addr(struct ixgb_hw *hw, uint8_t *mac_addr);
uint16_t ixgb_get_ee_compatibility(struct ixgb_hw *hw);
uint32_t ixgb_get_ee_pba_number(struct ixgb_hw *hw);
uint16_t ixgb_get_ee_init_ctrl_reg_1(struct ixgb_hw *hw);
uint16_t ixgb_get_ee_init_ctrl_reg_2(struct ixgb_hw *hw);
uint16_t ixgb_get_ee_subsystem_id(struct ixgb_hw *hw);
uint16_t ixgb_get_ee_subvendor_id(struct ixgb_hw *hw);
uint16_t ixgb_get_ee_device_id(struct ixgb_hw *hw);
uint16_t ixgb_get_ee_vendor_id(struct ixgb_hw *hw);
uint16_t ixgb_get_ee_swdpins_reg(struct ixgb_hw *hw);
uint8_t ixgb_get_ee_d3_power(struct ixgb_hw *hw);
uint8_t ixgb_get_ee_d0_power(struct ixgb_hw *hw);
boolean_t ixgb_get_eeprom_data(struct ixgb_hw *hw);
uint16_t ixgb_get_eeprom_word(struct ixgb_hw *hw, uint16_t index);
......
drivers/net/ixgb/ixgb_main.c
View file @ 3d963f5b
......@@ -29,6 +29,11 @@
#include "ixgb.h"
/* Change Log
* 1.0.96 04/19/05
* - Make needlessly global code static -- bunk@stusta.de
* - ethtool cleanup -- shemminger@osdl.org
* - Support for MODULE_VERSION -- linville@tuxdriver.com
* - add skb_header_cloned check to the tso path -- herbert@apana.org.au
* 1.0.88 01/05/05
* - include fix to the condition that determines when to quit NAPI - Robert Olsson
* - use netif_poll_{disable/enable} to synchronize between NAPI and i/f up/down
......@@ -47,10 +52,9 @@ char ixgb_driver_string[] = "Intel(R) PRO/10GbE Network Driver";
#else
#define DRIVERNAPI "-NAPI"
#endif
#define DRV_VERSION "1.0.95-k2"DRIVERNAPI
#define DRV_VERSION "1.0.100-k2"DRIVERNAPI
char ixgb_driver_version[] = DRV_VERSION;
char ixgb_copyright[] = "Copyright (c) 1999-2005 Intel Corporation.";
static char ixgb_copyright[] = "Copyright (c) 1999-2005 Intel Corporation.";
/* ixgb_pci_tbl - PCI Device ID Table
*
......@@ -145,10 +149,12 @@ MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
/* some defines for controlling descriptor fetches in h/w */
#define RXDCTL_PTHRESH_DEFAULT 128 /* chip considers prefech below this */
#define RXDCTL_HTHRESH_DEFAULT 16 /* chip will only prefetch if tail is
pushed this many descriptors from head */
#define RXDCTL_WTHRESH_DEFAULT 16 /* chip writes back at this many or RXT0 */
#define RXDCTL_PTHRESH_DEFAULT 0 /* chip considers prefech below
* this */
#define RXDCTL_HTHRESH_DEFAULT 0 /* chip will only prefetch if tail
* is pushed this many descriptors
* from head */
/**
* ixgb_init_module - Driver Registration Routine
......@@ -376,7 +382,7 @@ ixgb_probe(struct pci_dev *pdev,
SET_NETDEV_DEV(netdev, &pdev->dev);
pci_set_drvdata(pdev, netdev);
adapter = netdev->priv;
adapter = netdev_priv(netdev);
adapter->netdev = netdev;
adapter->pdev = pdev;
adapter->hw.back = adapter;
......@@ -512,7 +518,7 @@ static void __devexit
ixgb_remove(struct pci_dev *pdev)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct ixgb_adapter *adapter = netdev->priv;
struct ixgb_adapter *adapter = netdev_priv(netdev);
unregister_netdev(netdev);
......@@ -583,7 +589,7 @@ ixgb_sw_init(struct ixgb_adapter *adapter)
static int
ixgb_open(struct net_device *netdev)
{
struct ixgb_adapter *adapter = netdev->priv;
struct ixgb_adapter *adapter = netdev_priv(netdev);
int err;
/* allocate transmit descriptors */
......@@ -626,7 +632,7 @@ ixgb_open(struct net_device *netdev)
static int
ixgb_close(struct net_device *netdev)
{
struct ixgb_adapter *adapter = netdev->priv;
struct ixgb_adapter *adapter = netdev_priv(netdev);
ixgb_down(adapter, TRUE);
......@@ -1017,7 +1023,7 @@ ixgb_clean_rx_ring(struct ixgb_adapter *adapter)
static int
ixgb_set_mac(struct net_device *netdev, void *p)
{
struct ixgb_adapter *adapter = netdev->priv;
struct ixgb_adapter *adapter = netdev_priv(netdev);
struct sockaddr *addr = p;
if(!is_valid_ether_addr(addr->sa_data))
......@@ -1043,7 +1049,7 @@ ixgb_set_mac(struct net_device *netdev, void *p)
static void
ixgb_set_multi(struct net_device *netdev)
{
struct ixgb_adapter *adapter = netdev->priv;
struct ixgb_adapter *adapter = netdev_priv(netdev);
struct ixgb_hw *hw = &adapter->hw;
struct dev_mc_list *mc_ptr;
uint32_t rctl;
......@@ -1371,7 +1377,7 @@ ixgb_tx_queue(struct ixgb_adapter *adapter, int count, int vlan_id,int tx_flags)
static int
ixgb_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
{
struct ixgb_adapter *adapter = netdev->priv;
struct ixgb_adapter *adapter = netdev_priv(netdev);
unsigned int first;
unsigned int tx_flags = 0;
unsigned long flags;
......@@ -1425,7 +1431,7 @@ ixgb_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
static void
ixgb_tx_timeout(struct net_device *netdev)
{
struct ixgb_adapter *adapter = netdev->priv;
struct ixgb_adapter *adapter = netdev_priv(netdev);
/* Do the reset outside of interrupt context */
schedule_work(&adapter->tx_timeout_task);
......@@ -1434,7 +1440,7 @@ ixgb_tx_timeout(struct net_device *netdev)
static void
ixgb_tx_timeout_task(struct net_device *netdev)
{
struct ixgb_adapter *adapter = netdev->priv;
struct ixgb_adapter *adapter = netdev_priv(netdev);
ixgb_down(adapter, TRUE);
ixgb_up(adapter);
......@@ -1451,7 +1457,7 @@ ixgb_tx_timeout_task(struct net_device *netdev)
static struct net_device_stats *
ixgb_get_stats(struct net_device *netdev)
{
struct ixgb_adapter *adapter = netdev->priv;
struct ixgb_adapter *adapter = netdev_priv(netdev);
return &adapter->net_stats;
}
......@@ -1467,7 +1473,7 @@ ixgb_get_stats(struct net_device *netdev)
static int
ixgb_change_mtu(struct net_device *netdev, int new_mtu)
{
struct ixgb_adapter *adapter = netdev->priv;
struct ixgb_adapter *adapter = netdev_priv(netdev);
int max_frame = new_mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH;
int old_max_frame = netdev->mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH;
......@@ -1522,6 +1528,7 @@ ixgb_update_stats(struct ixgb_adapter *adapter)
multi |= ((u64)IXGB_READ_REG(&adapter->hw, MPRCH) << 32);
/* fix up multicast stats by removing broadcasts */
if(multi >= bcast)
multi -= bcast;
adapter->stats.mprcl += (multi & 0xFFFFFFFF);
......@@ -1641,7 +1648,7 @@ static irqreturn_t
ixgb_intr(int irq, void *data, struct pt_regs *regs)
{
struct net_device *netdev = data;
struct ixgb_adapter *adapter = netdev->priv;
struct ixgb_adapter *adapter = netdev_priv(netdev);
struct ixgb_hw *hw = &adapter->hw;
uint32_t icr = IXGB_READ_REG(hw, ICR);
#ifndef CONFIG_IXGB_NAPI
......@@ -1688,7 +1695,7 @@ ixgb_intr(int irq, void *data, struct pt_regs *regs)
static int
ixgb_clean(struct net_device *netdev, int *budget)
{
struct ixgb_adapter *adapter = netdev->priv;
struct ixgb_adapter *adapter = netdev_priv(netdev);
int work_to_do = min(*budget, netdev->quota);
int tx_cleaned;
int work_done = 0;
......@@ -2017,7 +2024,7 @@ ixgb_alloc_rx_buffers(struct ixgb_adapter *adapter)
static void
ixgb_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
{
struct ixgb_adapter *adapter = netdev->priv;
struct ixgb_adapter *adapter = netdev_priv(netdev);
uint32_t ctrl, rctl;
ixgb_irq_disable(adapter);
......@@ -2055,7 +2062,7 @@ ixgb_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
static void
ixgb_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid)
{
struct ixgb_adapter *adapter = netdev->priv;
struct ixgb_adapter *adapter = netdev_priv(netdev);
uint32_t vfta, index;
/* add VID to filter table */
......@@ -2069,7 +2076,7 @@ ixgb_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid)
static void
ixgb_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid)
{
struct ixgb_adapter *adapter = netdev->priv;
struct ixgb_adapter *adapter = netdev_priv(netdev);
uint32_t vfta, index;
ixgb_irq_disable(adapter);
......
drivers/net/jazzsonic.c
View file @ 3d963f5b
/*
* sonic.c
* jazzsonic.c
*
* (C) 2005 Finn Thain
*
* Converted to DMA API, and (from the mac68k project) introduced
* dhd's support for 16-bit cards.
*
* (C) 1996,1998 by Thomas Bogendoerfer (tsbogend@alpha.franken.de)
*
......@@ -28,8 +33,8 @@
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/bitops.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <asm/bootinfo.h>
#include <asm/system.h>
......@@ -44,22 +49,20 @@ static struct platform_device *jazz_sonic_device;
#define SONIC_MEM_SIZE 0x100
#define SREGS_PAD(n) u16 n;
#include "sonic.h"
/*
* Macros to access SONIC registers
*/
#define SONIC_READ(reg) (*((volatile unsigned int *)base_addr+reg))
#define SONIC_READ(reg) (*((volatile unsigned int *)dev->base_addr+reg))
#define SONIC_WRITE(reg,val) \
do { \
*((volatile unsigned int *)base_addr+(reg)) = (val); \
*((volatile unsigned int *)dev->base_addr+(reg)) = (val); \
} while (0)
/* use 0 for production, 1 for verification, >2 for debug */
/* use 0 for production, 1 for verification, >1 for debug */
#ifdef SONIC_DEBUG
static unsigned int sonic_debug = SONIC_DEBUG;
#else
......@@ -85,18 +88,18 @@ static unsigned short known_revisions[] =
0xffff /* end of list */
};
static int __init sonic_probe1(struct net_device *dev, unsigned long base_addr,
unsigned int irq)
static int __init sonic_probe1(struct net_device *dev)
{
static unsigned version_printed;
unsigned int silicon_revision;
unsigned int val;
struct sonic_local *lp;
struct sonic_local *lp = netdev_priv(dev);
int err = -ENODEV;
int i;
if (!request_mem_region(base_addr, SONIC_MEM_SIZE, jazz_sonic_string))
if (!request_mem_region(dev->base_addr, SONIC_MEM_SIZE, jazz_sonic_string))
return -EBUSY;
/*
* get the Silicon Revision ID. If this is one of the known
* one assume that we found a SONIC ethernet controller at
......@@ -120,11 +123,7 @@ static int __init sonic_probe1(struct net_device *dev, unsigned long base_addr,
if (sonic_debug && version_printed++ == 0)
printk(version);
printk("%s: Sonic ethernet found at 0x%08lx, ", dev->name, base_addr);
/* Fill in the 'dev' fields. */
dev->base_addr = base_addr;
dev->irq = irq;
printk(KERN_INFO "%s: Sonic ethernet found at 0x%08lx, ", lp->device->bus_id, dev->base_addr);
/*
* Put the sonic into software reset, then
......@@ -138,84 +137,44 @@ static int __init sonic_probe1(struct net_device *dev, unsigned long base_addr,
dev->dev_addr[i*2+1] = val >> 8;
}
printk("HW Address ");
for (i = 0; i < 6; i++) {
printk("%2.2x", dev->dev_addr[i]);
if (i<5)
printk(":");
}
printk(" IRQ %d\n", irq);
err = -ENOMEM;
/* Initialize the device structure. */
if (dev->priv == NULL) {
/*
* the memory be located in the same 64kb segment
*/
lp = NULL;
i = 0;
do {
lp = kmalloc(sizeof(*lp), GFP_KERNEL);
if ((unsigned long) lp >> 16
!= ((unsigned long)lp + sizeof(*lp) ) >> 16) {
/* FIXME, free the memory later */
kfree(lp);
lp = NULL;
}
} while (lp == NULL && i++ < 20);
if (lp == NULL) {
printk("%s: couldn't allocate memory for descriptors\n",
dev->name);
goto out;
}
memset(lp, 0, sizeof(struct sonic_local));
lp->dma_bitmode = SONIC_BITMODE32;
/* get the virtual dma address */
lp->cda_laddr = vdma_alloc(CPHYSADDR(lp),sizeof(*lp));
if (lp->cda_laddr == ~0UL) {
printk("%s: couldn't get DMA page entry for "
"descriptors\n", dev->name);
goto out1;
}
lp->tda_laddr = lp->cda_laddr + sizeof (lp->cda);
lp->rra_laddr = lp->tda_laddr + sizeof (lp->tda);
lp->rda_laddr = lp->rra_laddr + sizeof (lp->rra);
/* allocate receive buffer area */
/* FIXME, maybe we should use skbs */
lp->rba = kmalloc(SONIC_NUM_RRS * SONIC_RBSIZE, GFP_KERNEL);
if (!lp->rba) {
printk("%s: couldn't allocate receive buffers\n",
dev->name);
goto out2;
}
/* get virtual dma address */
lp->rba_laddr = vdma_alloc(CPHYSADDR(lp->rba),
SONIC_NUM_RRS * SONIC_RBSIZE);
if (lp->rba_laddr == ~0UL) {
printk("%s: couldn't get DMA page entry for receive "
"buffers\n",dev->name);
goto out3;
/* Allocate the entire chunk of memory for the descriptors.
Note that this cannot cross a 64K boundary. */
if ((lp->descriptors = dma_alloc_coherent(lp->device,
SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
&lp->descriptors_laddr, GFP_KERNEL)) == NULL) {
printk(KERN_ERR "%s: couldn't alloc DMA memory for descriptors.\n", lp->device->bus_id);
goto out;
}
/* now convert pointer to KSEG1 pointer */
lp->rba = (char *)KSEG1ADDR(lp->rba);
flush_cache_all();
dev->priv = (struct sonic_local *)KSEG1ADDR(lp);
}
/* Now set up the pointers to point to the appropriate places */
lp->cda = lp->descriptors;
lp->tda = lp->cda + (SIZEOF_SONIC_CDA
* SONIC_BUS_SCALE(lp->dma_bitmode));
lp->rda = lp->tda + (SIZEOF_SONIC_TD * SONIC_NUM_TDS
* SONIC_BUS_SCALE(lp->dma_bitmode));
lp->rra = lp->rda + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
* SONIC_BUS_SCALE(lp->dma_bitmode));
lp->cda_laddr = lp->descriptors_laddr;
lp->tda_laddr = lp->cda_laddr + (SIZEOF_SONIC_CDA
* SONIC_BUS_SCALE(lp->dma_bitmode));
lp->rda_laddr = lp->tda_laddr + (SIZEOF_SONIC_TD * SONIC_NUM_TDS
* SONIC_BUS_SCALE(lp->dma_bitmode));
lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
* SONIC_BUS_SCALE(lp->dma_bitmode));
lp = (struct sonic_local *)dev->priv;
dev->open = sonic_open;
dev->stop = sonic_close;
dev->hard_start_xmit = sonic_send_packet;
dev->get_stats = sonic_get_stats;
dev->set_multicast_list = &sonic_multicast_list;
dev->tx_timeout = sonic_tx_timeout;
dev->watchdog_timeo = TX_TIMEOUT;
/*
......@@ -226,14 +185,8 @@ static int __init sonic_probe1(struct net_device *dev, unsigned long base_addr,
SONIC_WRITE(SONIC_MPT,0xffff);
return 0;
out3:
kfree(lp->rba);
out2:
vdma_free(lp->cda_laddr);
out1:
kfree(lp);
out:
release_region(base_addr, SONIC_MEM_SIZE);
release_region(dev->base_addr, SONIC_MEM_SIZE);
return err;
}
......@@ -245,7 +198,6 @@ static int __init jazz_sonic_probe(struct device *device)
{
struct net_device *dev;
struct sonic_local *lp;
unsigned long base_addr;
int err = 0;
int i;
......@@ -255,21 +207,26 @@ static int __init jazz_sonic_probe(struct device *device)
if (mips_machgroup != MACH_GROUP_JAZZ)
return -ENODEV;
dev = alloc_etherdev(0);
dev = alloc_etherdev(sizeof(struct sonic_local));
if (!dev)
return -ENOMEM;
lp = netdev_priv(dev);
lp->device = device;
SET_NETDEV_DEV(dev, device);
SET_MODULE_OWNER(dev);
netdev_boot_setup_check(dev);
base_addr = dev->base_addr;
if (base_addr >= KSEG0) { /* Check a single specified location. */
err = sonic_probe1(dev, base_addr, dev->irq);
} else if (base_addr != 0) { /* Don't probe at all. */
if (dev->base_addr >= KSEG0) { /* Check a single specified location. */
err = sonic_probe1(dev);
} else if (dev->base_addr != 0) { /* Don't probe at all. */
err = -ENXIO;
} else {
for (i = 0; sonic_portlist[i].port; i++) {
int io = sonic_portlist[i].port;
if (sonic_probe1(dev, io, sonic_portlist[i].irq) == 0)
dev->base_addr = sonic_portlist[i].port;
dev->irq = sonic_portlist[i].irq;
if (sonic_probe1(dev) == 0)
break;
}
if (!sonic_portlist[i].port)
......@@ -281,14 +238,17 @@ static int __init jazz_sonic_probe(struct device *device)
if (err)
goto out1;
printk("%s: MAC ", dev->name);
for (i = 0; i < 6; i++) {
printk("%2.2x", dev->dev_addr[i]);
if (i < 5)
printk(":");
}
printk(" IRQ %d\n", dev->irq);
return 0;
out1:
lp = dev->priv;
vdma_free(lp->rba_laddr);
kfree(lp->rba);
vdma_free(lp->cda_laddr);
kfree(lp);
release_region(dev->base_addr, SONIC_MEM_SIZE);
out:
free_netdev(dev);
......@@ -296,21 +256,22 @@ static int __init jazz_sonic_probe(struct device *device)
return err;
}
/*
* SONIC uses a normal IRQ
*/
#define sonic_request_irq request_irq
#define sonic_free_irq free_irq
MODULE_DESCRIPTION("Jazz SONIC ethernet driver");
module_param(sonic_debug, int, 0);
MODULE_PARM_DESC(sonic_debug, "jazzsonic debug level (1-4)");
#define sonic_chiptomem(x) KSEG1ADDR(vdma_log2phys(x))
#define SONIC_IRQ_FLAG SA_INTERRUPT
#include "sonic.c"
static int __devexit jazz_sonic_device_remove (struct device *device)
{
struct net_device *dev = device->driver_data;
struct sonic_local* lp = netdev_priv(dev);
unregister_netdev (dev);
dma_free_coherent(lp->device, SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
lp->descriptors, lp->descriptors_laddr);
release_region (dev->base_addr, SONIC_MEM_SIZE);
free_netdev (dev);
......@@ -336,10 +297,11 @@ static void jazz_sonic_platform_release (struct device *device)
static int __init jazz_sonic_init_module(void)
{
struct platform_device *pldev;
int err;
if (driver_register(&jazz_sonic_driver)) {
if ((err = driver_register(&jazz_sonic_driver))) {
printk(KERN_ERR "Driver registration failed\n");
return -ENOMEM;
return err;
}
jazz_sonic_device = NULL;
......
drivers/net/loopback.c
View file @ 3d963f5b
......@@ -68,6 +68,7 @@ static DEFINE_PER_CPU(struct net_device_stats, loopback_stats);
* of largesending device modulo TCP checksum, which is ignored for loopback.
*/
#ifdef LOOPBACK_TSO
static void emulate_large_send_offload(struct sk_buff *skb)
{
struct iphdr *iph = skb->nh.iph;
......@@ -119,6 +120,7 @@ static void emulate_large_send_offload(struct sk_buff *skb)
dev_kfree_skb(skb);
}
#endif /* LOOPBACK_TSO */
/*
* The higher levels take care of making this non-reentrant (it's
......@@ -130,12 +132,13 @@ static int loopback_xmit(struct sk_buff *skb, struct net_device *dev)
skb_orphan(skb);
skb->protocol=eth_type_trans(skb,dev);
skb->dev=dev;
skb->protocol = eth_type_trans(skb,dev);
skb->dev = dev;
#ifndef LOOPBACK_MUST_CHECKSUM
skb->ip_summed = CHECKSUM_UNNECESSARY;
#endif
#ifdef LOOPBACK_TSO
if (skb_shinfo(skb)->tso_size) {
BUG_ON(skb->protocol != htons(ETH_P_IP));
BUG_ON(skb->nh.iph->protocol != IPPROTO_TCP);
......@@ -143,14 +146,14 @@ static int loopback_xmit(struct sk_buff *skb, struct net_device *dev)
emulate_large_send_offload(skb);
return 0;
}
#endif
dev->last_rx = jiffies;
lb_stats = &per_cpu(loopback_stats, get_cpu());
lb_stats->rx_bytes += skb->len;
lb_stats->tx_bytes += skb->len;
lb_stats->tx_bytes = lb_stats->rx_bytes;
lb_stats->rx_packets++;
lb_stats->tx_packets++;
lb_stats->tx_packets = lb_stats->rx_packets;
put_cpu();
netif_rx(skb);
......@@ -208,9 +211,12 @@ struct net_device loopback_dev = {
.type = ARPHRD_LOOPBACK, /* 0x0001*/
.rebuild_header = eth_rebuild_header,
.flags = IFF_LOOPBACK,
.features = NETIF_F_SG|NETIF_F_FRAGLIST
|NETIF_F_NO_CSUM|NETIF_F_HIGHDMA
|NETIF_F_LLTX,
.features = NETIF_F_SG | NETIF_F_FRAGLIST
#ifdef LOOPBACK_TSO
| NETIF_F_TSO
#endif
| NETIF_F_NO_CSUM | NETIF_F_HIGHDMA
| NETIF_F_LLTX,
.ethtool_ops = &loopback_ethtool_ops,
};
......
drivers/net/macsonic.c
View file @ 3d963f5b
This diff is collapsed.
drivers/net/mv643xx_eth.c
View file @ 3d963f5b
......@@ -1157,16 +1157,20 @@ static int mv643xx_eth_start_xmit(struct sk_buff *skb, struct net_device *dev)
if (!skb_shinfo(skb)->nr_frags) {
linear:
if (skb->ip_summed != CHECKSUM_HW) {
/* Errata BTS #50, IHL must be 5 if no HW checksum */
pkt_info.cmd_sts = ETH_TX_ENABLE_INTERRUPT |
ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC;
ETH_TX_FIRST_DESC |
ETH_TX_LAST_DESC |
5 << ETH_TX_IHL_SHIFT;
pkt_info.l4i_chk = 0;
} else {
u32 ipheader = skb->nh.iph->ihl << 11;
pkt_info.cmd_sts = ETH_TX_ENABLE_INTERRUPT |
ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC |
ETH_TX_FIRST_DESC |
ETH_TX_LAST_DESC |
ETH_GEN_TCP_UDP_CHECKSUM |
ETH_GEN_IP_V_4_CHECKSUM | ipheader;
ETH_GEN_IP_V_4_CHECKSUM |
skb->nh.iph->ihl << ETH_TX_IHL_SHIFT;
/* CPU already calculated pseudo header checksum. */
if (skb->nh.iph->protocol == IPPROTO_UDP) {
pkt_info.cmd_sts |= ETH_UDP_FRAME;
......@@ -1193,7 +1197,6 @@ static int mv643xx_eth_start_xmit(struct sk_buff *skb, struct net_device *dev)
stats->tx_bytes += pkt_info.byte_cnt;
} else {
unsigned int frag;
u32 ipheader;
/* Since hardware can't handle unaligned fragments smaller
* than 9 bytes, if we find any, we linearize the skb
......@@ -1222,12 +1225,16 @@ static int mv643xx_eth_start_xmit(struct sk_buff *skb, struct net_device *dev)
DMA_TO_DEVICE);
pkt_info.l4i_chk = 0;
pkt_info.return_info = 0;
pkt_info.cmd_sts = ETH_TX_FIRST_DESC;
if (skb->ip_summed == CHECKSUM_HW) {
ipheader = skb->nh.iph->ihl << 11;
pkt_info.cmd_sts |= ETH_GEN_TCP_UDP_CHECKSUM |
ETH_GEN_IP_V_4_CHECKSUM | ipheader;
if (skb->ip_summed != CHECKSUM_HW)
/* Errata BTS #50, IHL must be 5 if no HW checksum */
pkt_info.cmd_sts = ETH_TX_FIRST_DESC |
5 << ETH_TX_IHL_SHIFT;
else {
pkt_info.cmd_sts = ETH_TX_FIRST_DESC |
ETH_GEN_TCP_UDP_CHECKSUM |
ETH_GEN_IP_V_4_CHECKSUM |
skb->nh.iph->ihl << ETH_TX_IHL_SHIFT;
/* CPU already calculated pseudo header checksum. */
if (skb->nh.iph->protocol == IPPROTO_UDP) {
pkt_info.cmd_sts |= ETH_UDP_FRAME;
......
drivers/net/mv643xx_eth.h
View file @ 3d963f5b
......@@ -49,7 +49,7 @@
/* Checksum offload for Tx works for most packets, but
* fails if previous packet sent did not use hw csum
*/
#undef MV643XX_CHECKSUM_OFFLOAD_TX
#define MV643XX_CHECKSUM_OFFLOAD_TX
#define MV643XX_NAPI
#define MV643XX_TX_FAST_REFILL
#undef MV643XX_RX_QUEUE_FILL_ON_TASK /* Does not work, yet */
......@@ -217,6 +217,8 @@
#define ETH_TX_ENABLE_INTERRUPT (BIT23)
#define ETH_AUTO_MODE (BIT30)
#define ETH_TX_IHL_SHIFT 11
/* typedefs */
typedef enum _eth_func_ret_status {
......
drivers/net/pci-skeleton.c
View file @ 3d963f5b
......@@ -486,9 +486,9 @@ struct netdrv_private {
MODULE_AUTHOR ("Jeff Garzik <jgarzik@pobox.com>");
MODULE_DESCRIPTION ("Skeleton for a PCI Fast Ethernet driver");
MODULE_LICENSE("GPL");
MODULE_PARM (multicast_filter_limit, "i");
MODULE_PARM (max_interrupt_work, "i");
MODULE_PARM (media, "1-" __MODULE_STRING(8) "i");
module_param(multicast_filter_limit, int, 0);
module_param(max_interrupt_work, int, 0);
module_param_array(media, int, NULL, 0);
MODULE_PARM_DESC (multicast_filter_limit, "pci-skeleton maximum number of filtered multicast addresses");
MODULE_PARM_DESC (max_interrupt_work, "pci-skeleton maximum events handled per interrupt");
MODULE_PARM_DESC (media, "pci-skeleton: Bits 0-3: media type, bit 17: full duplex");
......
drivers/net/pcmcia/fmvj18x_cs.c
View file @ 3d963f5b
......@@ -134,7 +134,7 @@ typedef struct local_info_t {
u_char mc_filter[8];
} local_info_t;
#define MC_FILTERBREAK 64
#define MC_FILTERBREAK 8
/*====================================================================*/
/*
......@@ -1012,7 +1012,7 @@ static void fjn_reset(struct net_device *dev)
outb(BANK_1U, ioaddr + CONFIG_1);
/* set the multicast table to accept none. */
for (i = 0; i < 6; i++)
for (i = 0; i < 8; i++)
outb(0x00, ioaddr + MAR_ADR + i);
/* Switch to bank 2 (runtime mode) */
......@@ -1269,6 +1269,16 @@ static void set_rx_mode(struct net_device *dev)
u_long flags;
int i;
int saved_config_0 = inb(ioaddr + CONFIG_0);
local_irq_save(flags);
/* Disable Tx and Rx */
if (sram_config == 0)
outb(CONFIG0_RST, ioaddr + CONFIG_0);
else
outb(CONFIG0_RST_1, ioaddr + CONFIG_0);
if (dev->flags & IFF_PROMISC) {
/* Unconditionally log net taps. */
printk("%s: Promiscuous mode enabled.\n", dev->name);
......@@ -1290,20 +1300,23 @@ static void set_rx_mode(struct net_device *dev)
for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
i++, mclist = mclist->next) {
unsigned int bit =
ether_crc_le(ETH_ALEN, mclist->dmi_addr) & 0x3f;
mc_filter[bit >> 3] |= (1 << bit);
ether_crc_le(ETH_ALEN, mclist->dmi_addr) >> 26;
mc_filter[bit >> 3] |= (1 << (bit & 7));
}
outb(2, ioaddr + RX_MODE); /* Use normal mode. */
}
local_irq_save(flags);
if (memcmp(mc_filter, lp->mc_filter, sizeof(mc_filter))) {
int saved_bank = inb(ioaddr + CONFIG_1);
/* Switch to bank 1 and set the multicast table. */
outb(0xe4, ioaddr + CONFIG_1);
for (i = 0; i < 8; i++)
outb(mc_filter[i], ioaddr + 8 + i);
outb(mc_filter[i], ioaddr + MAR_ADR + i);
memcpy(lp->mc_filter, mc_filter, sizeof(mc_filter));
outb(saved_bank, ioaddr + CONFIG_1);
}
outb(saved_config_0, ioaddr + CONFIG_0);
local_irq_restore(flags);
}
drivers/net/phy/Kconfig 0 → 100644
View file @ 3d963f5b
#
# PHY Layer Configuration
#
menu "PHY device support"
config PHYLIB
tristate "PHY Device support and infrastructure"
depends on NET_ETHERNET
help
Ethernet controllers are usually attached to PHY
devices. This option provides infrastructure for
managing PHY devices.
config PHYCONTROL
bool " Support for automatically handling PHY state changes"
depends on PHYLIB
help
Adds code to perform all the work for keeping PHY link
state (speed/duplex/etc) up-to-date. Also handles
interrupts.
comment "MII PHY device drivers"
depends on PHYLIB
config MARVELL_PHY
tristate "Drivers for Marvell PHYs"
depends on PHYLIB
---help---
Currently has a driver for the 88E1011S
config DAVICOM_PHY
tristate "Drivers for Davicom PHYs"
depends on PHYLIB
---help---
Currently supports dm9161e and dm9131
config QSEMI_PHY
tristate "Drivers for Quality Semiconductor PHYs"
depends on PHYLIB
---help---
Currently supports the qs6612
config LXT_PHY
tristate "Drivers for the Intel LXT PHYs"
depends on PHYLIB
---help---
Currently supports the lxt970, lxt971
config CICADA_PHY
tristate "Drivers for the Cicada PHYs"
depends on PHYLIB
---help---
Currently supports the cis8204
endmenu
drivers/net/phy/Makefile 0 → 100644
View file @ 3d963f5b
# Makefile for Linux PHY drivers
libphy-objs := phy.o phy_device.o mdio_bus.o
obj-$(CONFIG_PHYLIB) += libphy.o
obj-$(CONFIG_MARVELL_PHY) += marvell.o
obj-$(CONFIG_DAVICOM_PHY) += davicom.o
obj-$(CONFIG_CICADA_PHY) += cicada.o
obj-$(CONFIG_LXT_PHY) += lxt.o
obj-$(CONFIG_QSEMI_PHY) += qsemi.o
drivers/net/phy/cicada.c 0 → 100644
View file @ 3d963f5b
/*
* drivers/net/phy/cicada.c
*
* Driver for Cicada PHYs
*
* Author: Andy Fleming
*
* Copyright (c) 2004 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/version.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/phy.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
/* Cicada Extended Control Register 1 */
#define MII_CIS8201_EXT_CON1 0x17
#define MII_CIS8201_EXTCON1_INIT 0x0000
/* Cicada Interrupt Mask Register */
#define MII_CIS8201_IMASK 0x19
#define MII_CIS8201_IMASK_IEN 0x8000
#define MII_CIS8201_IMASK_SPEED 0x4000
#define MII_CIS8201_IMASK_LINK 0x2000
#define MII_CIS8201_IMASK_DUPLEX 0x1000
#define MII_CIS8201_IMASK_MASK 0xf000
/* Cicada Interrupt Status Register */
#define MII_CIS8201_ISTAT 0x1a
#define MII_CIS8201_ISTAT_STATUS 0x8000
#define MII_CIS8201_ISTAT_SPEED 0x4000
#define MII_CIS8201_ISTAT_LINK 0x2000
#define MII_CIS8201_ISTAT_DUPLEX 0x1000
/* Cicada Auxiliary Control/Status Register */
#define MII_CIS8201_AUX_CONSTAT 0x1c
#define MII_CIS8201_AUXCONSTAT_INIT 0x0004
#define MII_CIS8201_AUXCONSTAT_DUPLEX 0x0020
#define MII_CIS8201_AUXCONSTAT_SPEED 0x0018
#define MII_CIS8201_AUXCONSTAT_GBIT 0x0010
#define MII_CIS8201_AUXCONSTAT_100 0x0008
MODULE_DESCRIPTION("Cicadia PHY driver");
MODULE_AUTHOR("Andy Fleming");
MODULE_LICENSE("GPL");
static int cis820x_config_init(struct phy_device *phydev)
{
int err;
err = phy_write(phydev, MII_CIS8201_AUX_CONSTAT,
MII_CIS8201_AUXCONSTAT_INIT);
if (err < 0)
return err;
err = phy_write(phydev, MII_CIS8201_EXT_CON1,
MII_CIS8201_EXTCON1_INIT);
return err;
}
static int cis820x_ack_interrupt(struct phy_device *phydev)
{
int err = phy_read(phydev, MII_CIS8201_ISTAT);
return (err < 0) ? err : 0;
}
static int cis820x_config_intr(struct phy_device *phydev)
{
int err;
if(phydev->interrupts == PHY_INTERRUPT_ENABLED)
err = phy_write(phydev, MII_CIS8201_IMASK,
MII_CIS8201_IMASK_MASK);
else
err = phy_write(phydev, MII_CIS8201_IMASK, 0);
return err;
}
/* Cicada 820x */
static struct phy_driver cis8204_driver = {
.phy_id = 0x000fc440,
.name = "Cicada Cis8204",
.phy_id_mask = 0x000fffc0,
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = &cis820x_config_init,
.config_aneg = &genphy_config_aneg,
.read_status = &genphy_read_status,
.ack_interrupt = &cis820x_ack_interrupt,
.config_intr = &cis820x_config_intr,
.driver = { .owner = THIS_MODULE,},
};
static int __init cis8204_init(void)
{
return phy_driver_register(&cis8204_driver);
}
static void __exit cis8204_exit(void)
{
phy_driver_unregister(&cis8204_driver);
}
module_init(cis8204_init);
module_exit(cis8204_exit);
drivers/net/phy/davicom.c 0 → 100644
View file @ 3d963f5b
/*
* drivers/net/phy/davicom.c
*
* Driver for Davicom PHYs
*
* Author: Andy Fleming
*
* Copyright (c) 2004 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/version.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/phy.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#define MII_DM9161_SCR 0x10
#define MII_DM9161_SCR_INIT 0x0610
/* DM9161 Interrupt Register */
#define MII_DM9161_INTR 0x15
#define MII_DM9161_INTR_PEND 0x8000
#define MII_DM9161_INTR_DPLX_MASK 0x0800
#define MII_DM9161_INTR_SPD_MASK 0x0400
#define MII_DM9161_INTR_LINK_MASK 0x0200
#define MII_DM9161_INTR_MASK 0x0100
#define MII_DM9161_INTR_DPLX_CHANGE 0x0010
#define MII_DM9161_INTR_SPD_CHANGE 0x0008
#define MII_DM9161_INTR_LINK_CHANGE 0x0004
#define MII_DM9161_INTR_INIT 0x0000
#define MII_DM9161_INTR_STOP \
(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \
| MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK)
/* DM9161 10BT Configuration/Status */
#define MII_DM9161_10BTCSR 0x12
#define MII_DM9161_10BTCSR_INIT 0x7800
MODULE_DESCRIPTION("Davicom PHY driver");
MODULE_AUTHOR("Andy Fleming");
MODULE_LICENSE("GPL");
#define DM9161_DELAY 1
static int dm9161_config_intr(struct phy_device *phydev)
{
int temp;
temp = phy_read(phydev, MII_DM9161_INTR);
if (temp < 0)
return temp;
if(PHY_INTERRUPT_ENABLED == phydev->interrupts )
temp &= ~(MII_DM9161_INTR_STOP);
else
temp |= MII_DM9161_INTR_STOP;
temp = phy_write(phydev, MII_DM9161_INTR, temp);
return temp;
}
static int dm9161_config_aneg(struct phy_device *phydev)
{
int err;
/* Isolate the PHY */
err = phy_write(phydev, MII_BMCR, BMCR_ISOLATE);
if (err < 0)
return err;
/* Configure the new settings */
err = genphy_config_aneg(phydev);
if (err < 0)
return err;
return 0;
}
static int dm9161_config_init(struct phy_device *phydev)
{
int err;
/* Isolate the PHY */
err = phy_write(phydev, MII_BMCR, BMCR_ISOLATE);
if (err < 0)
return err;
/* Do not bypass the scrambler/descrambler */
err = phy_write(phydev, MII_DM9161_SCR, MII_DM9161_SCR_INIT);
if (err < 0)
return err;
/* Clear 10BTCSR to default */
err = phy_write(phydev, MII_DM9161_10BTCSR, MII_DM9161_10BTCSR_INIT);
if (err < 0)
return err;
/* Reconnect the PHY, and enable Autonegotiation */
err = phy_write(phydev, MII_BMCR, BMCR_ANENABLE);
if (err < 0)
return err;
return 0;
}
static int dm9161_ack_interrupt(struct phy_device *phydev)
{
int err = phy_read(phydev, MII_DM9161_INTR);
return (err < 0) ? err : 0;
}
static struct phy_driver dm9161_driver = {
.phy_id = 0x0181b880,
.name = "Davicom DM9161E",
.phy_id_mask = 0x0ffffff0,
.features = PHY_BASIC_FEATURES,
.config_init = dm9161_config_init,
.config_aneg = dm9161_config_aneg,
.read_status = genphy_read_status,
.driver = { .owner = THIS_MODULE,},
};
static struct phy_driver dm9131_driver = {
.phy_id = 0x00181b80,
.name = "Davicom DM9131",
.phy_id_mask = 0x0ffffff0,
.features = PHY_BASIC_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = dm9161_ack_interrupt,
.config_intr = dm9161_config_intr,
.driver = { .owner = THIS_MODULE,},
};
static int __init davicom_init(void)
{
int ret;
ret = phy_driver_register(&dm9161_driver);
if (ret)
goto err1;
ret = phy_driver_register(&dm9131_driver);
if (ret)
goto err2;
return 0;
err2:
phy_driver_unregister(&dm9161_driver);
err1:
return ret;
}
static void __exit davicom_exit(void)
{
phy_driver_unregister(&dm9161_driver);
phy_driver_unregister(&dm9131_driver);
}
module_init(davicom_init);
module_exit(davicom_exit);
drivers/net/phy/lxt.c 0 → 100644
View file @ 3d963f5b
This diff is collapsed.
drivers/net/phy/marvell.c 0 → 100644
View file @ 3d963f5b
This diff is collapsed.
drivers/net/phy/mdio_bus.c 0 → 100644
View file @ 3d963f5b
This diff is collapsed.
drivers/net/phy/phy.c 0 → 100644
View file @ 3d963f5b
This diff is collapsed.
drivers/net/phy/phy_device.c 0 → 100644
View file @ 3d963f5b
This diff is collapsed.
drivers/net/phy/qsemi.c 0 → 100644
View file @ 3d963f5b
This diff is collapsed.
drivers/net/r8169.c
View file @ 3d963f5b
......@@ -187,6 +187,7 @@ static struct pci_device_id rtl8169_pci_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8169), },
{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4300), },
{ PCI_DEVICE(0x16ec, 0x0116), },
{ PCI_VENDOR_ID_LINKSYS, 0x1032, PCI_ANY_ID, 0x0024, },
{0,},
};
......
drivers/net/s2io-regs.h
View file @ 3d963f5b
This diff is collapsed.
drivers/net/s2io.c
View file @ 3d963f5b
This diff is collapsed.
drivers/net/s2io.h
View file @ 3d963f5b
This diff is collapsed.
drivers/net/skge.c
View file @ 3d963f5b
This diff is collapsed.
drivers/net/skge.h
View file @ 3d963f5b
......@@ -214,8 +214,6 @@ enum {
/* B2_IRQM_HWE_MSK 32 bit IRQ Moderation HW Error Mask */
enum {
IS_ERR_MSK = 0x00003fff,/* All Error bits */
IS_IRQ_TIST_OV = 1<<13, /* Time Stamp Timer Overflow (YUKON only) */
IS_IRQ_SENSOR = 1<<12, /* IRQ from Sensor (YUKON only) */
IS_IRQ_MST_ERR = 1<<11, /* IRQ master error detected */
......@@ -230,6 +228,12 @@ enum {
IS_M2_PAR_ERR = 1<<2, /* MAC 2 Parity Error */
IS_R1_PAR_ERR = 1<<1, /* Queue R1 Parity Error */
IS_R2_PAR_ERR = 1<<0, /* Queue R2 Parity Error */
IS_ERR_MSK = IS_IRQ_MST_ERR | IS_IRQ_STAT
| IS_NO_STAT_M1 | IS_NO_STAT_M2
| IS_RAM_RD_PAR | IS_RAM_WR_PAR
| IS_M1_PAR_ERR | IS_M2_PAR_ERR
| IS_R1_PAR_ERR | IS_R2_PAR_ERR,
};
/* B2_TST_CTRL1 8 bit Test Control Register 1 */
......@@ -2456,24 +2460,17 @@ struct skge_hw {
u8 chip_id;
u8 chip_rev;
u8 phy_type;
u8 pmd_type;
u16 phy_addr;
u8 copper;
u8 ports;
u32 ram_size;
u32 ram_offset;
u16 phy_addr;
struct tasklet_struct ext_tasklet;
spinlock_t phy_lock;
};
static inline int iscopper(const struct skge_hw *hw)
{
return (hw->pmd_type == 'T');
}
enum {
FLOW_MODE_NONE = 0, /* No Flow-Control */
FLOW_MODE_LOC_SEND = 1, /* Local station sends PAUSE */
......
drivers/net/sonic.c
View file @ 3d963f5b
This diff is collapsed.
drivers/net/sonic.h
View file @ 3d963f5b
This diff is collapsed.
drivers/net/tokenring/Kconfig
View file @ 3d963f5b
This diff is collapsed.
drivers/net/tokenring/abyss.c
View file @ 3d963f5b
......@@ -139,7 +139,7 @@ static int __devinit abyss_attach(struct pci_dev *pdev, const struct pci_device_
*/
dev->base_addr += 0x10;
ret = tmsdev_init(dev, PCI_MAX_ADDRESS, pdev);
ret = tmsdev_init(dev, &pdev->dev);
if (ret) {
printk("%s: unable to get memory for dev->priv.\n",
dev->name);
......
drivers/net/tokenring/madgemc.c
View file @ 3d963f5b
This diff is collapsed.
drivers/net/tokenring/proteon.c
View file @ 3d963f5b
This diff is collapsed.
drivers/net/tokenring/skisa.c
View file @ 3d963f5b
This diff is collapsed.
drivers/net/tokenring/tms380tr.c
View file @ 3d963f5b
This diff is collapsed.
drivers/net/tokenring/tms380tr.h
View file @ 3d963f5b
This diff is collapsed.
drivers/net/tokenring/tmspci.c
View file @ 3d963f5b
This diff is collapsed.
drivers/net/wan/cycx_drv.c
View file @ 3d963f5b
This diff is collapsed.
drivers/net/wireless/orinoco.c
View file @ 3d963f5b
This diff is collapsed.
include/linux/ethtool.h
View file @ 3d963f5b
This diff is collapsed.
include/linux/mii.h
View file @ 3d963f5b
This diff is collapsed.
include/linux/phy.h 0 → 100644
View file @ 3d963f5b
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7