Skip to content

L
linux
Commit 41984bac authored by Andrew Morton's avatar Andrew Morton Committed by Linus Torvalds
Browse files
Options

[PATCH] mips: remove dz driver 

From: Ralf Baechle <ralf@linux-mips.org>

This driver has been obsoleted by drivers/serial/dz.c.
parent 303165e9
Show whitespace changes
Inline Side-by-side
Showing with 0 additions and 1771 deletions
drivers/char/Makefile
View file @ 41984bac
...@@ -70,7 +70,6 @@ obj-$(CONFIG_QIC02_TAPE) += tpqic02.o ...@@ -70,7 +70,6 @@ obj-$(CONFIG_QIC02_TAPE) += tpqic02.o
obj-$(CONFIG_FTAPE) += ftape/ obj-$(CONFIG_FTAPE) += ftape/
obj-$(CONFIG_H8) += h8.o obj-$(CONFIG_H8) += h8.o
obj-$(CONFIG_PPDEV) += ppdev.o obj-$(CONFIG_PPDEV) += ppdev.o
obj-$(CONFIG_DZ) += dz.o
obj-$(CONFIG_NWBUTTON) += nwbutton.o obj-$(CONFIG_NWBUTTON) += nwbutton.o
obj-$(CONFIG_NWFLASH) += nwflash.o obj-$(CONFIG_NWFLASH) += nwflash.o
obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o
......
drivers/char/dz.c deleted 100644 → 0
View file @ 303165e9
/*
* dz.c: Serial port driver for DECStations equiped
* with the DZ chipset.
*
* Copyright (C) 1998 Olivier A. D. Lebaillif
*
* Email: olivier.lebaillif@ifrsys.com
*
* [31-AUG-98] triemer
* Changed IRQ to use Harald's dec internals interrupts.h
* removed base_addr code - moving address assignment to setup.c
* Changed name of dz_init to rs_init to be consistent with tc code
* [13-NOV-98] triemer fixed code to receive characters
* after patches by harald to irq code.
* [09-JAN-99] triemer minor fix for schedule - due to removal of timeout
* field from "current" - somewhere between 2.1.121 and 2.1.131
Qua Jun 27 15:02:26 BRT 2001
* [27-JUN-2001] Arnaldo Carvalho de Melo <acme@conectiva.com.br> - cleanups
*
* Parts (C) 1999 David Airlie, airlied@linux.ie
* [07-SEP-99] Bugfixes
*/
/* #define DEBUG_DZ 1 */
#include <linux/module.h>
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/major.h>
#include <linux/param.h>
#include <linux/interrupt.h>
#include <linux/serial.h>
#include <linux/serialP.h>
#include <asm-mips/wbflush.h>
#include <asm/dec/interrupts.h> /* for definition of SERIAL */
/* for definition of struct console */
#ifdef CONFIG_SERIAL_CONSOLE
#define CONSOLE_LINE (3)
#endif /* ifdef CONFIG_SERIAL_CONSOLE */
#if defined(CONFIG_SERIAL_CONSOLE) || defined(DEBUG_DZ)
#include <linux/console.h>
#endif /* if defined(CONFIG_SERIAL_CONSOLE) || defined(DEBUG_DZ) */
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <asm/uaccess.h>
#include <asm/irq.h>
#include <asm/dec/machtype.h>
#include <asm/dec/kn01.h>
#include <asm/dec/kn02.h>
#ifdef DEBUG_DZ
#include <linux/ptrace.h>
#include <linux/fs.h>
#include <asm/bootinfo.h>
extern int (*prom_printf) (char *,...);
#endif
#include "dz.h"
#define DZ_INTR_DEBUG 1
DECLARE_TASK_QUEUE(tq_serial);
static struct dz_serial *lines[4];
static unsigned char tmp_buffer[256];
#ifdef DEBUG_DZ
/*
* debugging code to send out chars via prom
*/
static void debug_console( const char *s,int count)
{
unsigned i;
for (i = 0; i < count; i++) {
if (*s == 10)
prom_printf("%c", 13);
prom_printf("%c", *s++);
}
}
#endif
/*
* ------------------------------------------------------------
* dz_in () and dz_out ()
*
* These routines are used to access the registers of the DZ
* chip, hiding relocation differences between implementation.
* ------------------------------------------------------------
*/
static inline unsigned short dz_in (struct dz_serial *info, unsigned offset)
{
volatile u16 *addr = (volatile u16 *)(info->port + offset);
return *addr;
}
static inline void dz_out (struct dz_serial *info, unsigned offset,
unsigned short value)
{
volatile u16 *addr = (volatile u16 *)(info->port + offset);
*addr = value;
}
/*
* ------------------------------------------------------------
* rs_stop () and rs_start ()
*
* These routines are called before setting or resetting
* tty->stopped. They enable or disable transmitter interrupts,
* as necessary.
* ------------------------------------------------------------
*/
static void dz_stop (struct tty_struct *tty)
{
struct dz_serial *info;
unsigned short mask, tmp;
if (!tty)
return;
info = (struct dz_serial *)tty->driver_data;
mask = 1 << info->line;
tmp = dz_in (info, DZ_TCR); /* read the TX flag */
tmp &= ~mask; /* clear the TX flag */
dz_out (info, DZ_TCR, tmp);
}
static void dz_start (struct tty_struct *tty)
{
struct dz_serial *info = (struct dz_serial *)tty->driver_data;
unsigned short mask, tmp;
mask = 1 << info->line;
tmp = dz_in (info, DZ_TCR); /* read the TX flag */
tmp |= mask; /* set the TX flag */
dz_out (info, DZ_TCR, tmp);
}
/*
* ------------------------------------------------------------
* Here starts the interrupt handling routines. All of the
* following subroutines are declared as inline and are folded
* into dz_interrupt. They were separated out for readability's
* sake.
*
* Note: rs_interrupt() is a "fast" interrupt, which means that it
* runs with interrupts turned off. People who may want to modify
* rs_interrupt() should try to keep the interrupt handler as fast as
* possible. After you are done making modifications, it is not a bad
* idea to do:
*
* gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer dz.c
*
* and look at the resulting assemble code in serial.s.
*
* ------------------------------------------------------------
*/
/*
* ------------------------------------------------------------
* dz_sched_event ()
*
* This routine is used by the interrupt handler to schedule
* processing in the software interrupt portion of the driver.
* ------------------------------------------------------------
*/
static inline void dz_sched_event (struct dz_serial *info, int event)
{
info->event |= 1 << event;
queue_task(&info->tqueue, &tq_serial);
mark_bh(SERIAL_BH);
}
/*
* ------------------------------------------------------------
* receive_char ()
*
* This routine deals with inputs from any lines.
* ------------------------------------------------------------
*/
static inline void receive_chars (struct dz_serial *info_in)
{
struct dz_serial *info;
struct tty_struct *tty = 0;
struct async_icount *icount;
int ignore = 0;
unsigned short status, tmp;
unsigned char ch;
/*
* This code is going to be a problem... the call to tty_flip_buffer
* is going to need to be rethought...
*/
do {
status = dz_in (info_in, DZ_RBUF);
info = lines[LINE(status)];
/* punt so we don't get duplicate characters */
if (!(status & DZ_DVAL))
goto ignore_char;
ch = UCHAR(status); /* grab the char */
#if 0
if (info->is_console) {
if (ch == 0)
return; /* it's a break ... */
}
#endif
tty = info->tty; /* now tty points to the proper dev */
icount = &info->icount;
if (!tty)
break;
if (tty->flip.count >= TTY_FLIPBUF_SIZE) break;
*tty->flip.char_buf_ptr = ch;
*tty->flip.flag_buf_ptr = 0;
icount->rx++;
/* keep track of the statistics */
if (status & (DZ_OERR | DZ_FERR | DZ_PERR)) {
if (status & DZ_PERR) /* parity error */
icount->parity++;
else if (status & DZ_FERR) /* frame error */
icount->frame++;
if (status & DZ_OERR) /* overrun error */
icount->overrun++;
/*
* Check to see if we should ignore the character and
* mask off conditions that should be ignored
*/
if (status & info->ignore_status_mask) {
if (++ignore > 100)
break;
goto ignore_char;
}
/* mask off the error conditions we want to ignore */
tmp = status & info->read_status_mask;
if (tmp & DZ_PERR) {
*tty->flip.flag_buf_ptr = TTY_PARITY;
#ifdef DEBUG_DZ
debug_console("PERR\n",5);
#endif /* DEBUG_DZ */
} else if (tmp & DZ_FERR) {
*tty->flip.flag_buf_ptr = TTY_FRAME;
#ifdef DEBUG_DZ
debug_console("FERR\n",5);
#endif /* DEBUG_DZ */
} if (tmp & DZ_OERR) {
#ifdef DEBUG_DZ
debug_console("OERR\n",5);
#endif /* DEBUG_DZ */
if (tty->flip.count < TTY_FLIPBUF_SIZE) {
tty->flip.count++;
tty->flip.flag_buf_ptr++;
tty->flip.char_buf_ptr++;
*tty->flip.flag_buf_ptr = TTY_OVERRUN;
}
}
}
tty->flip.flag_buf_ptr++;
tty->flip.char_buf_ptr++;
tty->flip.count++;
ignore_char:
;
} while (status & DZ_DVAL);
if (tty)
tty_flip_buffer_push(tty);
}
/*
* ------------------------------------------------------------
* transmit_char ()
*
* This routine deals with outputs to any lines.
* ------------------------------------------------------------
*/
static inline void transmit_chars (struct dz_serial *info)
{
unsigned char tmp;
if (info->x_char) { /* XON/XOFF chars */
dz_out(info, DZ_TDR, info->x_char);
info->icount.tx++;
info->x_char = 0;
return;
}
/* if nothing to do or stopped or hardware stopped */
if ((info->xmit_cnt <= 0) || info->tty->stopped ||
info->tty->hw_stopped) {
dz_stop(info->tty);
return;
}
/*
* If something to do ... (rember the dz has no output fifo so we go
* one char at a time :-<
*/
tmp = (unsigned short) info->xmit_buf[info->xmit_tail++];
dz_out(info, DZ_TDR, tmp);
info->xmit_tail = info->xmit_tail & (DZ_XMIT_SIZE - 1);
info->icount.tx++;
if (--info->xmit_cnt < WAKEUP_CHARS)
dz_sched_event(info, DZ_EVENT_WRITE_WAKEUP);
/* Are we done */
if (info->xmit_cnt <= 0)
dz_stop(info->tty);
}
/*
* ------------------------------------------------------------
* check_modem_status ()
*
* Only valid for the MODEM line duh !
* ------------------------------------------------------------
*/
static inline void check_modem_status (struct dz_serial *info)
{
unsigned short status;
/* if not ne modem line just return */
if (info->line != DZ_MODEM)
return;
status = dz_in(info, DZ_MSR);
/* it's easy, since DSR2 is the only bit in the register */
if (status)
info->icount.dsr++;
}
/*
* ------------------------------------------------------------
* dz_interrupt ()
*
* this is the main interrupt routine for the DZ chip.
* It deals with the multiple ports.
* ------------------------------------------------------------
*/
static void dz_interrupt (int irq, void *dev, struct pt_regs *regs)
{
struct dz_serial *info;
unsigned short status;
/* get the reason why we just got an irq */
status = dz_in((struct dz_serial *)dev, DZ_CSR);
info = lines[LINE(status)]; /* re-arrange info the proper port */
if (status & DZ_RDONE)
receive_chars(info); /* the receive function */
if (status & DZ_TRDY)
transmit_chars (info);
}
/*
* -------------------------------------------------------------------
* Here ends the DZ interrupt routines.
* -------------------------------------------------------------------
*/
/*
* This routine is used to handle the "bottom half" processing for the
* serial driver, known also the "software interrupt" processing.
* This processing is done at the kernel interrupt level, after the
* rs_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This
* is where time-consuming activities which can not be done in the
* interrupt driver proper are done; the interrupt driver schedules
* them using rs_sched_event(), and they get done here.
*/
static void do_serial_bh (void)
{
run_task_queue (&tq_serial);
}
static void do_softint (void *private_data)
{
struct dz_serial *info = (struct dz_serial *) private_data;
struct tty_struct *tty = info->tty;
if (!tty)
return;
if (test_and_clear_bit(DZ_EVENT_WRITE_WAKEUP, &info->event)) {
if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
tty->ldisc.write_wakeup)
(tty->ldisc.write_wakeup) (tty);
wake_up_interruptible (&tty->write_wait);
}
}
/*
* -------------------------------------------------------------------
* This routine is called from the scheduler tqueue when the interrupt
* routine has signalled that a hangup has occurred. The path of
* hangup processing is:
*
* serial interrupt routine -> (scheduler tqueue) ->
* do_serial_hangup() -> tty->hangup() -> rs_hangup()
* -------------------------------------------------------------------
*/
static void do_serial_hangup (void *private_data)
{
struct dz_serial *info = (struct dz_serial *) private_data;
struct tty_struct *tty = info->tty;
if (!tty)
return;
tty_hangup(tty);
}
/*
* -------------------------------------------------------------------
* startup ()
*
* various initialization tasks
* -------------------------------------------------------------------
*/
static int startup (struct dz_serial *info)
{
unsigned long page, flags;
unsigned short tmp;
if (info->is_initialized)
return 0;
save_and_cli(flags);
if (!info->port) {
if (info->tty) set_bit(TTY_IO_ERROR, &info->tty->flags);
restore_flags(flags);
return -ENODEV;
}
if (!info->xmit_buf) {
page = get_zeroed_page(GFP_KERNEL);
if (!page) {
restore_flags (flags);
return -ENOMEM;
}
info->xmit_buf = (unsigned char *)page;
}
if (info->tty)
clear_bit(TTY_IO_ERROR, &info->tty->flags);
/* enable the interrupt and the scanning */
tmp = dz_in(info, DZ_CSR);
tmp |= (DZ_RIE | DZ_TIE | DZ_MSE);
dz_out(info, DZ_CSR, tmp);
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
change_speed(info); /* set up the speed */
/*
* Clear the line transmitter buffer I can't figure out why I need to
* do this - but its necessary - in order for the console portion and
* the interrupt portion to live happily side by side.
*/
info->is_initialized = 1;
restore_flags(flags);
return 0;
}
/*
* -------------------------------------------------------------------
* shutdown ()
*
* This routine will shutdown a serial port; interrupts are disabled, and
* DTR is dropped if the hangup on close termio flag is on.
* -------------------------------------------------------------------
*/
static void shutdown (struct dz_serial *info)
{
unsigned long flags;
unsigned short tmp;
if (!info->is_initialized)
return;
save_and_cli(flags);
dz_stop (info->tty);
info->cflags &= ~DZ_CREAD; /* turn off receive enable flag */
dz_out(info, DZ_LPR, info->cflags);
if (info->xmit_buf) { /* free Tx buffer */
free_page((unsigned long)info->xmit_buf);
info->xmit_buf = 0;
}
if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) {
tmp = dz_in(info, DZ_TCR);
if (tmp & DZ_MODEM_DTR) {
tmp &= ~DZ_MODEM_DTR;
dz_out(info, DZ_TCR, tmp);
}
}
if (info->tty)
set_bit (TTY_IO_ERROR, &info->tty->flags);
info->is_initialized = 0;
restore_flags (flags);
}
/*
* -------------------------------------------------------------------
* change_speed ()
*
* set the baud rate.
* -------------------------------------------------------------------
*/
static void change_speed (struct dz_serial *info)
{
unsigned long flags;
unsigned cflag;
int baud;
if (!info->tty || !info->tty->termios)
return;
save_and_cli(flags);
info->cflags = info->line;
cflag = info->tty->termios->c_cflag;
switch (cflag & CSIZE) {
case CS5:
info->cflags |= DZ_CS5;
break;
case CS6:
info->cflags |= DZ_CS6;
break;
case CS7:
info->cflags |= DZ_CS7;
break;
case CS8:
default:
info->cflags |= DZ_CS8;
}
if (cflag & CSTOPB)
info->cflags |= DZ_CSTOPB;
if (cflag & PARENB)
info->cflags |= DZ_PARENB;
if (cflag & PARODD)
info->cflags |= DZ_PARODD;
baud = tty_get_baud_rate(info->tty);
switch (baud) {
case 50:
info->cflags |= DZ_B50;
break;
case 75:
info->cflags |= DZ_B75;
break;
case 110:
info->cflags |= DZ_B110;
break;
case 134:
info->cflags |= DZ_B134;
break;
case 150:
info->cflags |= DZ_B150;
break;
case 300:
info->cflags |= DZ_B300;
break;
case 600:
info->cflags |= DZ_B600;
break;
case 1200:
info->cflags |= DZ_B1200;
break;
case 1800:
info->cflags |= DZ_B1800;
break;
case 2000:
info->cflags |= DZ_B2000;
break;
case 2400:
info->cflags |= DZ_B2400;
break;
case 3600:
info->cflags |= DZ_B3600;
break;
case 4800:
info->cflags |= DZ_B4800;
break;
case 7200:
info->cflags |= DZ_B7200;
break;
case 9600:
default:
info->cflags |= DZ_B9600;
}
info->cflags |= DZ_RXENAB;
dz_out(info, DZ_LPR, info->cflags);
/* setup accept flag */
info->read_status_mask = DZ_OERR;
if (I_INPCK(info->tty))
info->read_status_mask |= (DZ_FERR | DZ_PERR);
/* characters to ignore */
info->ignore_status_mask = 0;
if (I_IGNPAR(info->tty))
info->ignore_status_mask |= (DZ_FERR | DZ_PERR);
restore_flags(flags);
}
/*
* -------------------------------------------------------------------
* dz_flush_char ()
*
* Flush the buffer.
* -------------------------------------------------------------------
*/
static void dz_flush_chars (struct tty_struct *tty)
{
struct dz_serial *info = (struct dz_serial *)tty->driver_data;
unsigned long flags;
if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped ||
!info->xmit_buf)
return;
save_and_cli(flags);
dz_start (info->tty);
restore_flags(flags);
}
/*
* -------------------------------------------------------------------
* dz_write ()
*
* main output routine.
* -------------------------------------------------------------------
*/
static int dz_write (struct tty_struct *tty, int from_user,
const unsigned char *buf, int count)
{
struct dz_serial *info = (struct dz_serial *)tty->driver_data;
unsigned long flags;
int c, ret = 0;
if (!tty )
return ret;
if (!info->xmit_buf)
return ret;
if (!tmp_buf)
tmp_buf = tmp_buffer;
if (from_user) {
down (&tmp_buf_sem);
while (1) {
c = MIN(count, MIN(DZ_XMIT_SIZE - info->xmit_cnt - 1,
DZ_XMIT_SIZE - info->xmit_head));
if (c <= 0)
break;
c -= copy_from_user (tmp_buf, buf, c);
if (!c) {
if (!ret)
ret = -EFAULT;
break;
}
save_and_cli(flags);
c = MIN(c, MIN(DZ_XMIT_SIZE - info->xmit_cnt - 1,
DZ_XMIT_SIZE - info->xmit_head));
memcpy(info->xmit_buf + info->xmit_head, tmp_buf, c);
info->xmit_head = ((info->xmit_head + c) &
(DZ_XMIT_SIZE - 1));
info->xmit_cnt += c;
restore_flags(flags);
buf += c;
count -= c;
ret += c;
}
up(&tmp_buf_sem);
} else {
while (1) {
save_and_cli(flags);
c = MIN(count, MIN(DZ_XMIT_SIZE - info->xmit_cnt - 1,
DZ_XMIT_SIZE - info->xmit_head));
if (c <= 0) {
restore_flags (flags);
break;
}
memcpy(info->xmit_buf + info->xmit_head, buf, c);
info->xmit_head = ((info->xmit_head + c) &
(DZ_XMIT_SIZE-1));
info->xmit_cnt += c;
restore_flags(flags);
buf += c;
count -= c;
ret += c;
}
}
if (info->xmit_cnt) {
if (!tty->stopped) {
if (!tty->hw_stopped) {
dz_start (info->tty);
}
}
}
return ret;
}
/*
* -------------------------------------------------------------------
* dz_write_room ()
*
* compute the amount of space available for writing.
* -------------------------------------------------------------------
*/
static int dz_write_room (struct tty_struct *tty)
{
struct dz_serial *info = (struct dz_serial *)tty->driver_data;
int ret;
ret = DZ_XMIT_SIZE - info->xmit_cnt - 1;
if (ret < 0)
ret = 0;
return ret;
}
/*
* -------------------------------------------------------------------
* dz_chars_in_buffer ()
*
* compute the amount of char left to be transmitted
* -------------------------------------------------------------------
*/
static int dz_chars_in_buffer (struct tty_struct *tty)
{
struct dz_serial *info = (struct dz_serial *)tty->driver_data;
return info->xmit_cnt;
}
/*
* -------------------------------------------------------------------
* dz_flush_buffer ()
*
* Empty the output buffer
* -------------------------------------------------------------------
*/
static void dz_flush_buffer (struct tty_struct *tty)
{
struct dz_serial *info = (struct dz_serial *)tty->driver_data;
cli();
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
sti();
wake_up_interruptible (&tty->write_wait);
if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
tty->ldisc.write_wakeup)
tty->ldisc.write_wakeup(tty);
}
/*
* ------------------------------------------------------------
* dz_throttle () and dz_unthrottle ()
*
* This routine is called by the upper-layer tty layer to signal that
* incoming characters should be throttled (or not).
* ------------------------------------------------------------
*/
static void dz_throttle (struct tty_struct *tty)
{
struct dz_serial *info = (struct dz_serial *)tty->driver_data;
if (I_IXOFF(tty))
info->x_char = STOP_CHAR(tty);
}
static void dz_unthrottle (struct tty_struct *tty)
{
struct dz_serial *info = (struct dz_serial *)tty->driver_data;
if (I_IXOFF(tty)) {
if (info->x_char)
info->x_char = 0;
else
info->x_char = START_CHAR(tty);
}
}
static void dz_send_xchar (struct tty_struct *tty, char ch)
{
struct dz_serial *info = (struct dz_serial *)tty->driver_data;
info->x_char = ch;
if (ch)
dz_start(info->tty);
}
/*
* ------------------------------------------------------------
* rs_ioctl () and friends
* ------------------------------------------------------------
*/
static int get_serial_info(struct dz_serial *info,
struct serial_struct *retinfo)
{
struct serial_struct tmp;
if (!retinfo)
return -EFAULT;
memset (&tmp, 0, sizeof(tmp));
tmp.type = info->type;
tmp.line = info->line;
tmp.port = info->port;
tmp.irq = SERIAL;
tmp.flags = info->flags;
tmp.baud_base = info->baud_base;
tmp.close_delay = info->close_delay;
tmp.closing_wait = info->closing_wait;
return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0;
}
static int set_serial_info (struct dz_serial *info,
struct serial_struct *new_info)
{
struct serial_struct new_serial;
struct dz_serial old_info;
int retval = 0;
if (!new_info)
return -EFAULT;
if (copy_from_user(&new_serial, new_info, sizeof(new_serial)))
return -EFAULT;
old_info = *info;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
if (info->count > 1)
return -EBUSY;
/*
* OK, past this point, all the error checking has been done.
* At this point, we start making changes.....
*/
info->baud_base = new_serial.baud_base;
info->type = new_serial.type;
info->close_delay = new_serial.close_delay;
info->closing_wait = new_serial.closing_wait;
retval = startup(info);
return retval;
}
/*
* get_lsr_info - get line status register info
*
* Purpose: Let user call ioctl() to get info when the UART physically
* is emptied. On bus types like RS485, the transmitter must
* release the bus after transmitting. This must be done when
* the transmit shift register is empty, not be done when the
* transmit holding register is empty. This functionality
* allows an RS485 driver to be written in user space.
*/
static int get_lsr_info (struct dz_serial *info, unsigned int *value)
{
unsigned short status = dz_in (info, DZ_LPR);
return put_user (status, value);
}
/*
* This routine sends a break character out the serial port.
*/
static void send_break (struct dz_serial *info, int duration)
{
unsigned long flags;
unsigned short tmp, mask;
if (!info->port)
return;
mask = 1 << info->line;
tmp = dz_in (info, DZ_TCR);
tmp |= mask;
current->state = TASK_INTERRUPTIBLE;
save_and_cli(flags);
dz_out(info, DZ_TCR, tmp);
schedule_timeout(duration);
tmp &= ~mask;
dz_out(info, DZ_TCR, tmp);
restore_flags(flags);
}
static int dz_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
int error;
struct dz_serial * info = (struct dz_serial *)tty->driver_data;
int retval;
if (cmd != TIOCGSERIAL && cmd != TIOCSSERIAL &&
cmd != TIOCSERCONFIG && cmd != TIOCSERGWILD &&
cmd != TIOCSERSWILD && cmd != TIOCSERGSTRUCT) {
if (tty->flags & (1 << TTY_IO_ERROR))
return -EIO;
}
switch (cmd) {
case TCSBRK: /* SVID version: non-zero arg --> no break */
retval = tty_check_change(tty);
if (retval)
return retval;
tty_wait_until_sent(tty, 0);
if (!arg)
send_break(info, HZ/4); /* 1/4 second */
return 0;
case TCSBRKP: /* support for POSIX tcsendbreak() */
retval = tty_check_change(tty);
if (retval)
return retval;
tty_wait_until_sent(tty, 0);
send_break(info, arg ? arg*(HZ/10) : HZ/4);
return 0;
case TIOCGSOFTCAR:
return put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long *)arg);
case TIOCSSOFTCAR:
if (get_user (arg, (unsigned long *)arg))
return -EFAULT;
tty->termios->c_cflag = (tty->termios->c_cflag & ~CLOCAL) |
(arg ? CLOCAL : 0);
return 0;
case TIOCGSERIAL:
return get_serial_info(info, (struct serial_struct *)arg);
case TIOCSSERIAL:
return set_serial_info(info, (struct serial_struct *) arg);
case TIOCSERGETLSR: /* Get line status register */
return get_lsr_info (info, (unsigned int *)arg);
case TIOCSERGSTRUCT:
return copy_to_user((struct dz_serial *)arg, info,
sizeof(struct dz_serial)) ? -EFAULT : 0;
default:
return -ENOIOCTLCMD;
}
return 0;
}
static void dz_set_termios (struct tty_struct *tty,
struct termios *old_termios)
{
struct dz_serial *info = (struct dz_serial *)tty->driver_data;
if (tty->termios->c_cflag == old_termios->c_cflag)
return;
change_speed (info);
if ((old_termios->c_cflag & CRTSCTS) &&
!(tty->termios->c_cflag & CRTSCTS)) {
tty->hw_stopped = 0;
dz_start(tty);
}
}
/*
* ------------------------------------------------------------
* dz_close()
*
* This routine is called when the serial port gets closed. First, we
* wait for the last remaining data to be sent. Then, we turn off
* the transmit enable and receive enable flags.
* ------------------------------------------------------------
*/
static void dz_close(struct tty_struct *tty, struct file *filp)
{
struct dz_serial * info = (struct dz_serial *)tty->driver_data;
unsigned long flags;
if (!info)
return;
save_and_cli(flags);
if (tty_hung_up_p(filp)) {
restore_flags(flags);
return;
}
if ((tty->count == 1) && (info->count != 1)) {
/*
* Uh, oh. tty->count is 1, which means that the tty structure
* will be freed. Info->count should always be one in these
* conditions. If it's greater than one, we've got real
* problems, since it means the serial port won't be shutdown.
*/
printk("dz_close: bad serial port count; tty->count is 1, "
"info->count is %d\n", info->count);
info->count = 1;
}
if (--info->count < 0) {
printk("ds_close: bad serial port count for ttyS%02d: %d\n",
info->line, info->count);
info->count = 0;
}
if (info->count) {
restore_flags(flags);
return;
}
info->flags |= DZ_CLOSING;
/*
* Now we wait for the transmit buffer to clear; and we notify the line
* discipline to only process XON/XOFF characters.
*/
tty->closing = 1;
if (info->closing_wait != DZ_CLOSING_WAIT_NONE)
tty_wait_until_sent(tty, info->closing_wait);
/*
* At this point we stop accepting input. To do this, we disable the
* receive line status interrupts.
*/
shutdown(info);
if (tty->driver->flush_buffer)
tty->driver->flush_buffer (tty);
if (tty->ldisc.flush_buffer)
tty->ldisc.flush_buffer (tty);
tty->closing = 0;
info->event = 0;
info->tty = 0;
if (tty->ldisc.num != ldiscs[N_TTY].num) {
if (tty->ldisc.close)
tty->ldisc.close(tty);
tty->ldisc = ldiscs[N_TTY];
tty->termios->c_line = N_TTY;
if (tty->ldisc.open)
tty->ldisc.open(tty);
}
if (info->blocked_open) {
if (info->close_delay) {
current->state = TASK_INTERRUPTIBLE;
schedule_timeout(info->close_delay);
}
wake_up_interruptible(&info->open_wait);
}
info->flags &= ~(DZ_NORMAL_ACTIVE | DZ_CLOSING);
wake_up_interruptible(&info->close_wait);
restore_flags(flags);
}
/*
* dz_hangup () --- called by tty_hangup() when a hangup is signaled.
*/
static void dz_hangup (struct tty_struct *tty)
{
struct dz_serial *info = (struct dz_serial *) tty->driver_data;
dz_flush_buffer(tty);
shutdown(info);
info->event = 0;
info->count = 0;
info->flags &= ~DZ_NORMAL_ACTIVE;
info->tty = 0;
wake_up_interruptible(&info->open_wait);
}
/*
* ------------------------------------------------------------
* rs_open() and friends
* ------------------------------------------------------------
*/
static int block_til_ready(struct tty_struct *tty, struct file *filp,
struct dz_serial *info)
{
DECLARE_WAITQUEUE(wait, current);
int retval;
int do_clocal = 0;
/*
* If the device is in the middle of being closed, then block
* until it's done, and then try again.
*/
if (info->flags & DZ_CLOSING) {
interruptible_sleep_on(&info->close_wait);
return -EAGAIN;
}
/*
* If non-blocking mode is set, or the port is not enabled, then make
* the check up front and then exit.
*/
if ((filp->f_flags & O_NONBLOCK) ||
(tty->flags & (1 << TTY_IO_ERROR))) {
info->flags |= DZ_NORMAL_ACTIVE;
return 0;
}
if (tty->termios->c_cflag & CLOCAL)
do_clocal = 1;
/*
* Block waiting for the carrier detect and the line to become free
* (i.e., not in use by the callout). While we are in this loop,
* info->count is dropped by one, so that dz_close() knows when to free
* things. We restore it upon exit, either normal or abnormal.
*/
retval = 0;
add_wait_queue(&info->open_wait, &wait);
info->count--;
info->blocked_open++;
while (1) {
set_current_state(TASK_INTERRUPTIBLE);
if (tty_hung_up_p (filp) || !(info->is_initialized)) {
retval = -EAGAIN;
break;
}
if (!(info->flags & DZ_CLOSING) && do_clocal)
break;
if (signal_pending(current)) {
retval = -ERESTARTSYS;
break;
}
schedule();
}
current->state = TASK_RUNNING;
remove_wait_queue (&info->open_wait, &wait);
if (!tty_hung_up_p(filp))
info->count++;
info->blocked_open--;
if (retval)
return retval;
info->flags |= DZ_NORMAL_ACTIVE;
return 0;
}
/*
* This routine is called whenever a serial port is opened. It
* enables interrupts for a serial port. It also performs the
* serial-specific initialization for the tty structure.
*/
static int dz_open (struct tty_struct *tty, struct file *filp)
{
struct dz_serial *info;
int retval, line;
line = tty->index;
/*
* The dz lines for the mouse/keyboard must be opened using their
* respective drivers.
*/
if ((line < 0) || (line >= DZ_NB_PORT))
return -ENODEV;
if ((line == DZ_KEYBOARD) || (line == DZ_MOUSE))
return -ENODEV;
info = lines[line];
info->count++;
tty->driver_data = info;
info->tty = tty;
/*
* Start up serial port
*/
retval = startup (info);
if (retval)
return retval;
retval = block_til_ready (tty, filp, info);
if (retval)
return retval;
return 0;
}
static void show_serial_version (void)
{
printk("%s%s\n", dz_name, dz_version);
}
static struct tty_driver *serial_driver;
static struct tty_operations serial_ops = {
.open = dz_open,
.close = dz_close,
.write = dz_write,
.flush_chars = dz_flush_chars,
.write_room = dz_write_room,
.chars_in_buffer = dz_chars_in_buffer,
.flush_buffer = dz_flush_buffer,
.ioctl = dz_ioctl,
.throttle = dz_throttle,
.unthrottle = dz_unthrottle,
.send_xchar = dz_send_xchar,
.set_termios = dz_set_termios,
.stop = dz_stop,
.start = dz_start,
.hangup = dz_hangup,
};
int __init dz_init(void)
{
int i, flags;
struct dz_serial *info;
serial_driver = alloc_tty_driver(DZ_NB_PORT);
if (!serial_driver)
return -ENOMEM;
/* Setup base handler, and timer table. */
init_bh(SERIAL_BH, do_serial_bh);
show_serial_version();
serial_driver->owner = THIS_MODULE;
serial_driver->devfs_name = "tts/";
serial_driver->name = "ttyS";
serial_driver->major = TTY_MAJOR;
serial_driver->minor_start = 64;
serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
serial_driver->subtype = SERIAL_TYPE_NORMAL;
serial_driver->init_termios = tty_std_termios;
serial_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL |
CLOCAL;
serial_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS;
tty_set_operations(serial_driver, &serial_ops);
if (tty_register_driver(serial_driver))
panic("Couldn't register serial driver\n");
save_flags(flags); cli();
for (i=0; i < DZ_NB_PORT; i++) {
info = &multi[i];
lines[i] = info;
info->magic = SERIAL_MAGIC;
if ((mips_machtype == MACH_DS23100) ||
(mips_machtype == MACH_DS5100))
info->port = (unsigned long) KN01_DZ11_BASE;
else
info->port = (unsigned long) KN02_DZ11_BASE;
info->line = i;
info->tty = 0;
info->close_delay = 50;
info->closing_wait = 3000;
info->x_char = 0;
info->event = 0;
info->count = 0;
info->blocked_open = 0;
info->tqueue.routine = do_softint;
info->tqueue.data = info;
info->tqueue_hangup.routine = do_serial_hangup;
info->tqueue_hangup.data = info;
init_waitqueue_head(&info->open_wait);
init_waitqueue_head(&info->close_wait);
/*
* If we are pointing to address zero then punt - not correctly
* set up in setup.c to handle this.
*/
if (! info->port)
return 0;
printk("ttyS%02d at 0x%08x (irq = %d)\n", info->line,
info->port, SERIAL);
tty_register_device(serial_driver, info->line, NULL);
}
/* Reset the chip */
#ifndef CONFIG_SERIAL_CONSOLE
{
int tmp;
dz_out(info, DZ_CSR, DZ_CLR);
while ((tmp = dz_in(info,DZ_CSR)) & DZ_CLR);
wbflush();
/* Enable scanning */
dz_out(info, DZ_CSR, DZ_MSE);
}
#endif
/*
* Order matters here... the trick is that flags is updated... in
* request_irq - to immediatedly obliterate it is unwise.
*/
restore_flags(flags);
if (request_irq(SERIAL, dz_interrupt, SA_INTERRUPT, "DZ", lines[0]))
panic("Unable to register DZ interrupt\n");
return 0;
}
#ifdef CONFIG_SERIAL_CONSOLE
static void dz_console_put_char (unsigned char ch)
{
unsigned long flags;
int loops = 2500;
unsigned short tmp = ch;
/*
* this code sends stuff out to serial device - spinning its wheels and
* waiting.
*/
/* force the issue - point it at lines[3]*/
dz_console = &multi[CONSOLE_LINE];
save_and_cli(flags);
/* spin our wheels */
while (((dz_in(dz_console, DZ_CSR) & DZ_TRDY) != DZ_TRDY) && loops--)
;
/* Actually transmit the character. */
dz_out(dz_console, DZ_TDR, tmp);
restore_flags(flags);
}
/*
* -------------------------------------------------------------------
* dz_console_print ()
*
* dz_console_print is registered for printk.
* The console must be locked when we get here.
* -------------------------------------------------------------------
*/
static void dz_console_print (struct console *cons,
const char *str,
unsigned int count)
{
#ifdef DEBUG_DZ
prom_printf((char *)str);
#endif
while (count--) {
if (*str == '\n')
dz_console_put_char('\r');
dz_console_put_char(*str++);
}
}
static struct tty_driver *dz_console_device(struct console *c, int *index)
{
*index = c->index;
return serial_driver;
}
static int __init dz_console_setup(struct console *co, char *options)
{
int baud = 9600;
int bits = 8;
int parity = 'n';
int cflag = CREAD | HUPCL | CLOCAL;
char *s;
unsigned short mask,tmp;
if (options) {
baud = simple_strtoul(options, NULL, 10);
s = options;
while (*s >= '0' && *s <= '9')
s++;
if (*s)
parity = *s++;
if (*s)
bits = *s - '0';
}
/*
* Now construct a cflag setting.
*/
switch (baud) {
case 1200:
cflag |= DZ_B1200;
break;
case 2400:
cflag |= DZ_B2400;
break;
case 4800:
cflag |= DZ_B4800;
break;
case 9600:
default:
cflag |= DZ_B9600;
break;
}
switch (bits) {
case 7:
cflag |= DZ_CS7;
break;
default:
case 8:
cflag |= DZ_CS8;
break;
}
switch (parity) {
case 'o':
case 'O':
cflag |= DZ_PARODD;
break;
case 'e':
case 'E':
cflag |= DZ_PARENB;
break;
}
co->cflag = cflag;
/* TOFIX: force to console line */
dz_console = &multi[CONSOLE_LINE];
if ((mips_machtype == MACH_DS23100) || (mips_machtype == MACH_DS5100))
dz_console->port = KN01_DZ11_BASE;
else
dz_console->port = KN02_DZ11_BASE;
dz_console->line = CONSOLE_LINE;
dz_out(dz_console, DZ_CSR, DZ_CLR);
while ((tmp = dz_in(dz_console,DZ_CSR)) & DZ_CLR)
;
/* enable scanning */
dz_out(dz_console, DZ_CSR, DZ_MSE);
/* Set up flags... */
dz_console->cflags = 0;
dz_console->cflags |= DZ_B9600;
dz_console->cflags |= DZ_CS8;
dz_console->cflags |= DZ_PARENB;
dz_out(dz_console, DZ_LPR, dz_console->cflags);
mask = 1 << dz_console->line;
tmp = dz_in (dz_console, DZ_TCR); /* read the TX flag */
if (!(tmp & mask)) {
tmp |= mask; /* set the TX flag */
dz_out (dz_console, DZ_TCR, tmp);
}
return 0;
}
static struct console dz_sercons = {
.name = "ttyS",
.write = dz_console_print,
.device = dz_console_device,
.setup = dz_console_setup,
.flags = CON_CONSDEV | CON_PRINTBUFFER,
.index = CONSOLE_LINE,
};
void __init dz_serial_console_init(void)
{
register_console(&dz_sercons);
}
#endif /* ifdef CONFIG_SERIAL_CONSOLE */
MODULE_LICENSE("GPL");
drivers/char/dz.h deleted 100644 → 0
View file @ 303165e9
/*
* dz.h: Serial port driver for DECStations equiped
* with the DZ chipset.
*
* Copyright (C) 1998 Olivier A. D. Lebaillif
*
* Email: olivier.lebaillif@ifrsys.com
*
*/
#ifndef DZ_SERIAL_H
#define DZ_SERIAL_H
/*
* Definitions for the Control and Status Received.
*/
#define DZ_TRDY 0x8000 /* Transmitter empty */
#define DZ_TIE 0x4000 /* Transmitter Interrupt Enable */
#define DZ_RDONE 0x0080 /* Receiver data ready */
#define DZ_RIE 0x0040 /* Receive Interrupt Enable */
#define DZ_MSE 0x0020 /* Master Scan Enable */
#define DZ_CLR 0x0010 /* Master reset */
#define DZ_MAINT 0x0008 /* Loop Back Mode */
/*
* Definitions for the Received buffer.
*/
#define DZ_RBUF_MASK 0x00FF /* Data Mask in the Receive Buffer */
#define DZ_LINE_MASK 0x0300 /* Line Mask in the Receive Buffer */
#define DZ_DVAL 0x8000 /* Valid Data indicator */
#define DZ_OERR 0x4000 /* Overrun error indicator */
#define DZ_FERR 0x2000 /* Frame error indicator */
#define DZ_PERR 0x1000 /* Parity error indicator */
#define LINE(x) (x & DZ_LINE_MASK) >> 8 /* Get the line number from the input buffer */
#define UCHAR(x) (unsigned char)(x & DZ_RBUF_MASK)
/*
* Definitions for the Transmit Register.
*/
#define DZ_LINE_KEYBOARD 0x0001
#define DZ_LINE_MOUSE 0x0002
#define DZ_LINE_MODEM 0x0004
#define DZ_LINE_PRINTER 0x0008
#define DZ_MODEM_DTR 0x0400 /* DTR for the modem line (2) */
/*
* Definitions for the Modem Status Register.
*/
#define DZ_MODEM_DSR 0x0200 /* DSR for the modem line (2) */
/*
* Definitions for the Transmit Data Register.
*/
#define DZ_BRK0 0x0100 /* Break assertion for line 0 */
#define DZ_BRK1 0x0200 /* Break assertion for line 1 */
#define DZ_BRK2 0x0400 /* Break assertion for line 2 */
#define DZ_BRK3 0x0800 /* Break assertion for line 3 */
/*
* Definitions for the Line Parameter Register.
*/
#define DZ_KEYBOARD 0x0000 /* line 0 = keyboard */
#define DZ_MOUSE 0x0001 /* line 1 = mouse */
#define DZ_MODEM 0x0002 /* line 2 = modem */
#define DZ_PRINTER 0x0003 /* line 3 = printer */
#define DZ_CSIZE 0x0018 /* Number of bits per byte (mask) */
#define DZ_CS5 0x0000 /* 5 bits per byte */
#define DZ_CS6 0x0008 /* 6 bits per byte */
#define DZ_CS7 0x0010 /* 7 bits per byte */
#define DZ_CS8 0x0018 /* 8 bits per byte */
#define DZ_CSTOPB 0x0020 /* 2 stop bits instead of one */
#define DZ_PARENB 0x0040 /* Parity enable */
#define DZ_PARODD 0x0080 /* Odd parity instead of even */
#define DZ_CBAUD 0x0E00 /* Baud Rate (mask) */
#define DZ_B50 0x0000
#define DZ_B75 0x0100
#define DZ_B110 0x0200
#define DZ_B134 0x0300
#define DZ_B150 0x0400
#define DZ_B300 0x0500
#define DZ_B600 0x0600
#define DZ_B1200 0x0700
#define DZ_B1800 0x0800
#define DZ_B2000 0x0900
#define DZ_B2400 0x0A00
#define DZ_B3600 0x0B00
#define DZ_B4800 0x0C00
#define DZ_B7200 0x0D00
#define DZ_B9600 0x0E00
#define DZ_CREAD 0x1000 /* Enable receiver */
#define DZ_RXENAB 0x1000 /* enable receive char */
/*
* Addresses for the DZ registers
*/
#define DZ_CSR 0x00 /* Control and Status Register */
#define DZ_RBUF 0x08 /* Receive Buffer */
#define DZ_LPR 0x08 /* Line Parameters Register */
#define DZ_TCR 0x10 /* Transmitter Control Register */
#define DZ_MSR 0x18 /* Modem Status Register */
#define DZ_TDR 0x18 /* Transmit Data Register */
#define DZ_NB_PORT 4
#define DZ_XMIT_SIZE 4096 /* buffer size */
#define WAKEUP_CHARS DZ_XMIT_SIZE/4
#define DZ_EVENT_WRITE_WAKEUP 0
#ifndef MIN
#define MIN(a,b) ((a) < (b) ? (a) : (b))
#define DZ_INITIALIZED 0x80000000 /* Serial port was initialized */
#define DZ_CALLOUT_ACTIVE 0x40000000 /* Call out device is active */
#define DZ_NORMAL_ACTIVE 0x20000000 /* Normal device is active */
#define DZ_BOOT_AUTOCONF 0x10000000 /* Autoconfigure port on bootup */
#define DZ_CLOSING 0x08000000 /* Serial port is closing */
#define DZ_CTS_FLOW 0x04000000 /* Do CTS flow control */
#define DZ_CHECK_CD 0x02000000 /* i.e., CLOCAL */
#define DZ_CLOSING_WAIT_INF 0
#define DZ_CLOSING_WAIT_NONE 65535
#define DZ_SPLIT_TERMIOS 0x0008 /* Separate termios for dialin/callout */
#define DZ_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */
#define DZ_PGRP_LOCKOUT 0x0200 /* Lock out cua opens based on pgrp */
struct dz_serial {
unsigned port; /* base address for the port */
int type;
int flags;
int baud_base;
int blocked_open;
unsigned short close_delay;
unsigned short closing_wait;
unsigned short line; /* port/line number */
unsigned short cflags; /* line configuration flag */
unsigned short x_char; /* xon/xoff character */
unsigned short read_status_mask; /* mask for read condition */
unsigned short ignore_status_mask; /* mask for ignore condition */
unsigned long event; /* mask used in BH */
unsigned char *xmit_buf; /* Transmit buffer */
int xmit_head; /* Position of the head */
int xmit_tail; /* Position of the tail */
int xmit_cnt; /* Count of the chars in the buffer */
int count; /* indicates how many times it has been opened */
int magic;
struct async_icount icount; /* keep track of things ... */
struct tty_struct *tty; /* tty associated */
struct tq_struct tqueue; /* Queue for BH */
struct tq_struct tqueue_hangup;
wait_queue_head_t open_wait;
wait_queue_head_t close_wait;
unsigned char is_console; /* flag indicating a serial console */
unsigned char is_initialized;
};
static struct dz_serial multi[DZ_NB_PORT]; /* Four serial lines in the DZ chip */
static struct dz_serial *dz_console;
/*
* tmp_buf is used as a temporary buffer by serial_write. We need to
* lock it in case the copy_from_user blocks while swapping in a page,
* and some other program tries to do a serial write at the same time.
* Since the lock will only come under contention when the system is
* swapping and available memory is low, it makes sense to share one
* buffer across all the serial ports, since it significantly saves
* memory if large numbers of serial ports are open.
*/
static unsigned char *tmp_buf;
static DECLARE_MUTEX(tmp_buf_sem);
static char *dz_name = "DECstation DZ serial driver version ";
static char *dz_version = "1.02";
static inline unsigned short dz_in (struct dz_serial *, unsigned);
static inline void dz_out (struct dz_serial *, unsigned, unsigned short);
static inline void dz_sched_event (struct dz_serial *, int);
static inline void receive_chars (struct dz_serial *);
static inline void transmit_chars (struct dz_serial *);
static inline void check_modem_status (struct dz_serial *);
static void dz_stop (struct tty_struct *);
static void dz_start (struct tty_struct *);
static void dz_interrupt (int, void *, struct pt_regs *);
static void do_serial_bh (void);
static void do_softint (void *);
static void do_serial_hangup (void *);
static void change_speed (struct dz_serial *);
static void dz_flush_chars (struct tty_struct *);
static void dz_console_print (struct console *, const char *, unsigned int);
static void dz_flush_buffer (struct tty_struct *);
static void dz_throttle (struct tty_struct *);
static void dz_unthrottle (struct tty_struct *);
static void dz_send_xchar (struct tty_struct *, char);
static void shutdown (struct dz_serial *);
static void send_break (struct dz_serial *, int);
static void dz_set_termios (struct tty_struct *, struct termios *);
static void dz_close (struct tty_struct *, struct file *);
static void dz_hangup (struct tty_struct *);
static void show_serial_version (void);
static int dz_write (struct tty_struct *, int, const unsigned char *, int);
static int dz_write_room (struct tty_struct *);
static int dz_chars_in_buffer (struct tty_struct *);
static int startup (struct dz_serial *);
static int get_serial_info (struct dz_serial *, struct serial_struct *);
static int set_serial_info (struct dz_serial *, struct serial_struct *);
static int get_lsr_info (struct dz_serial *, unsigned int *);
static int dz_ioctl (struct tty_struct *, struct file *, unsigned int, unsigned long);
static int block_til_ready (struct tty_struct *, struct file *, struct dz_serial *);
static int dz_open (struct tty_struct *, struct file *);
#ifdef MODULE
int init_module (void)
void cleanup_module (void)
#endif
#endif
#endif /* DZ_SERIAL_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7