net/mlx4: Change ENOTSUPP to EOPNOTSUPP

As ENOTSUPP is specific to NFS, change the return error value to
EOPNOTSUPP in various places in the mlx4 driver.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Suggested-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c

@@ -319,7 +319,7 @@ static int mlx4_en_ets_validate(struct mlx4_en_priv *priv, struct ieee_ets *ets)
 		default:
 			en_err(priv, "TC[%d]: Not supported TSA: %d\n",
 					i, ets->tc_tsa[i]);
-			return -ENOTSUPP;
+			return -EOPNOTSUPP;
 		}
 	}
 

drivers/net/ethernet/mellanox/mlx4/fw.c

@@ -2436,7 +2436,7 @@ int mlx4_config_dev_retrieval(struct mlx4_dev *dev,
 #define CONFIG_DEV_RX_CSUM_MODE_PORT2_BIT_OFFSET	4
 
 	if (!(dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_CONFIG_DEV))
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	err = mlx4_CONFIG_DEV_get(dev, &config_dev);
 	if (err)

drivers/net/ethernet/mellanox/mlx4/intf.c

@@ -136,7 +136,7 @@ int mlx4_do_bond(struct mlx4_dev *dev, bool enable)
 	LIST_HEAD(bond_list);
 
 	if (!(dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_PORT_REMAP))
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	ret = mlx4_disable_rx_port_check(dev, enable);
 	if (ret) {

drivers/net/ethernet/mellanox/mlx4/main.c

@@ -1447,7 +1447,7 @@ int mlx4_port_map_set(struct mlx4_dev *dev, struct mlx4_port_map *v2p)
 	int err;
 
 	if (!(dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_PORT_REMAP))
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	mutex_lock(&priv->bond_mutex);
 
@@ -1884,7 +1884,7 @@ int mlx4_get_internal_clock_params(struct mlx4_dev *dev,
 	struct mlx4_priv *priv = mlx4_priv(dev);
 
 	if (mlx4_is_slave(dev))
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	if (!params)
 		return -EINVAL;
@@ -2384,7 +2384,7 @@ static int mlx4_init_hca(struct mlx4_dev *dev)
 
 	/* Query CONFIG_DEV parameters */
 	err = mlx4_config_dev_retrieval(dev, &params);
-	if (err && err != -ENOTSUPP) {
+	if (err && err != -EOPNOTSUPP) {
 		mlx4_err(dev, "Failed to query CONFIG_DEV parameters\n");
 	} else if (!err) {
 		dev->caps.rx_checksum_flags_port[1] = params.rx_csum_flags_port_1;

drivers/net/ethernet/mellanox/mlx4/mr.c

@@ -823,7 +823,7 @@ int mlx4_mw_alloc(struct mlx4_dev *dev, u32 pd, enum mlx4_mw_type type,
 	     !(dev->caps.flags & MLX4_DEV_CAP_FLAG_MEM_WINDOW)) ||
 	     (type == MLX4_MW_TYPE_2 &&
 	     !(dev->caps.bmme_flags & MLX4_BMME_FLAG_TYPE_2_WIN)))
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	index = mlx4_mpt_reserve(dev);
 	if (index == -1)

drivers/net/ethernet/mellanox/mlx4/qp.c

@@ -447,7 +447,7 @@ int mlx4_update_qp(struct mlx4_dev *dev, u32 qpn,
 		      & MLX4_DEV_CAP_FLAG2_UPDATE_QP_SRC_CHECK_LB)) {
 			mlx4_warn(dev,
 				  "Trying to set src check LB, but it isn't supported\n");
-			err = -ENOTSUPP;
+			err = -EOPNOTSUPP;
 			goto out;
 		}
 		pri_addr_path_mask |=

drivers/net/ethernet/mellanox/mlx4/resource_tracker.c

@@ -4297,7 +4297,7 @@ int mlx4_UPDATE_QP_wrapper(struct mlx4_dev *dev, int slave,
 		  MLX4_DEV_CAP_FLAG2_UPDATE_QP_SRC_CHECK_LB)) {
 		mlx4_warn(dev, "Src check LB for slave %d isn't supported\n",
 			  slave);
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 	}
 
 	/* Just change the smac for the QP */