Skip to content

L
linux
Commit 424047e6 authored by Michael Buesch's avatar Michael Buesch Committed by David S. Miller
Browse files
Options

b43: Add N-PHY register definitions 

This patch adds all register definitions for the N-PHY.
This adds two new files: nphy.h and nphy.c
No functional changes to existing code.
Signed-off-by: default avatarMichael Buesch <mb@bu3sch.de>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 9081728b
Hide whitespace changes
Inline Side-by-side
Showing with 760 additions and 12 deletions
drivers/net/wireless/b43/Makefile
View file @ 424047e6
b43-y += main.o
b43-y += tables.o
b43-y += phy.o
b43-y += nphy.o
b43-y += sysfs.o
b43-y += xmit.o
b43-y += lo.o
......
drivers/net/wireless/b43/nphy.c 0 → 100644
View file @ 424047e6
/*
Broadcom B43 wireless driver
IEEE 802.11n PHY support
Copyright (c) 2008 Michael Buesch <mb@bu3sch.de>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; see the file COPYING. If not, write to
the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
Boston, MA 02110-1301, USA.
*/
#include "b43.h"
#include "nphy.h"
int b43_phy_initn(struct b43_wldev *dev)
{
b43err(dev->wl, "IEEE 802.11n devices are not supported, yet.\n");
return -EOPNOTSUPP;
}
drivers/net/wireless/b43/nphy.h 0 → 100644
View file @ 424047e6
#ifndef B43_NPHY_H_
#define B43_NPHY_H_
#include "phy.h"
/* N-PHY registers. */
#define B43_NPHY_BBCFG B43_PHY_N(0x001) /* BB config */
#define B43_NPHY_BBCFG_RSTCCA 0x4000 /* Reset CCA */
#define B43_NPHY_BBCFG_RSTRX 0x8000 /* Reset RX */
#define B43_NPHY_CHANNEL B43_PHY_N(0x005) /* Channel */
#define B43_NPHY_TXERR B43_PHY_N(0x007) /* TX error */
#define B43_NPHY_BANDCTL B43_PHY_N(0x009) /* Band control */
#define B43_NPHY_4WI_ADDR B43_PHY_N(0x00B) /* Four-wire bus address */
#define B43_NPHY_4WI_DATAHI B43_PHY_N(0x00C) /* Four-wire bus data high */
#define B43_NPHY_4WI_DATALO B43_PHY_N(0x00D) /* Four-wire bus data low */
#define B43_NPHY_BIST_STAT0 B43_PHY_N(0x00E) /* Built-in self test status 0 */
#define B43_NPHY_BIST_STAT1 B43_PHY_N(0x00F) /* Built-in self test status 1 */
#define B43_NPHY_C1_DESPWR B43_PHY_N(0x018) /* Core 1 desired power */
#define B43_NPHY_C1_CCK_DESPWR B43_PHY_N(0x019) /* Core 1 CCK desired power */
#define B43_NPHY_C1_BCLIPBKOFF B43_PHY_N(0x01A) /* Core 1 barely clip backoff */
#define B43_NPHY_C1_CCK_BCLIPBKOFF B43_PHY_N(0x01B) /* Core 1 CCK barely clip backoff */
#define B43_NPHY_C1_CGAINI B43_PHY_N(0x01C) /* Core 1 compute gain info */
#define B43_NPHY_C1_CGAINI_GAINBKOFF 0x001F /* Gain backoff */
#define B43_NPHY_C1_CGAINI_CLIPGBKOFF 0x03E0 /* Clip gain backoff */
#define B43_NPHY_C1_CGAINI_GAINSTEP 0x1C00 /* Gain step */
#define B43_NPHY_C1_CGAINI_CL2DETECT 0x2000 /* Clip 2 detect mask */
#define B43_NPHY_C1_CCK_CGAINI B43_PHY_N(0x01D) /* Core 1 CCK compute gain info */
#define B43_NPHY_C1_CCK_CGAINI_GAINBKOFF 0x001F /* Gain backoff */
#define B43_NPHY_C1_CCK_CGAINI_CLIPGBKOFF 0x01E0 /* CCK barely clip gain backoff */
#define B43_NPHY_C1_MINMAX_GAIN B43_PHY_N(0x01E) /* Core 1 min/max gain */
#define B43_NPHY_C1_MINGAIN 0x00FF /* Minimum gain */
#define B43_NPHY_C1_MINGAIN_SHIFT 0
#define B43_NPHY_C1_MAXGAIN 0xFF00 /* Maximum gain */
#define B43_NPHY_C1_MAXGAIN_SHIFT 8
#define B43_NPHY_C1_CCK_MINMAX_GAIN B43_PHY_N(0x01F) /* Core 1 CCK min/max gain */
#define B43_NPHY_C1_CCK_MINGAIN 0x00FF /* Minimum gain */
#define B43_NPHY_C1_CCK_MINGAIN_SHIFT 0
#define B43_NPHY_C1_CCK_MAXGAIN 0xFF00 /* Maximum gain */
#define B43_NPHY_C1_CCK_MAXGAIN_SHIFT 8
#define B43_NPHY_C1_INITGAIN B43_PHY_N(0x020) /* Core 1 initial gain code */
#define B43_NPHY_C1_INITGAIN_EXTLNA 0x0001 /* External LNA index */
#define B43_NPHY_C1_INITGAIN_LNA 0x0006 /* LNA index */
#define B43_NPHY_C1_INITGAIN_LNAIDX_SHIFT 1
#define B43_NPHY_C1_INITGAIN_HPVGA1 0x0078 /* HPVGA1 index */
#define B43_NPHY_C1_INITGAIN_HPVGA1_SHIFT 3
#define B43_NPHY_C1_INITGAIN_HPVGA2 0x0F80 /* HPVGA2 index */
#define B43_NPHY_C1_INITGAIN_HPVGA2_SHIFT 7
#define B43_NPHY_C1_INITGAIN_TRRX 0x1000 /* TR RX index */
#define B43_NPHY_C1_INITGAIN_TRTX 0x2000 /* TR TX index */
#define B43_NPHY_C1_CLIP1_HIGAIN B43_PHY_N(0x021) /* Core 1 clip1 high gain code */
#define B43_NPHY_C1_CLIP1_MEDGAIN B43_PHY_N(0x022) /* Core 1 clip1 medium gain code */
#define B43_NPHY_C1_CLIP1_LOGAIN B43_PHY_N(0x023) /* Core 1 clip1 low gain code */
#define B43_NPHY_C1_CLIP2_GAIN B43_PHY_N(0x024) /* Core 1 clip2 gain code */
#define B43_NPHY_C1_FILTERGAIN B43_PHY_N(0x025) /* Core 1 filter gain */
#define B43_NPHY_C1_LPF_QHPF_BW B43_PHY_N(0x026) /* Core 1 LPF Q HP F bandwidth */
#define B43_NPHY_C1_CLIPWBTHRES B43_PHY_N(0x027) /* Core 1 clip wideband threshold */
#define B43_NPHY_C1_CLIPWBTHRES_CLIP2 0x003F /* Clip 2 */
#define B43_NPHY_C1_CLIPWBTHRES_CLIP2_SHIFT 0
#define B43_NPHY_C1_CLIPWBTHRES_CLIP1 0x0FC0 /* Clip 1 */
#define B43_NPHY_C1_CLIPWBTHRES_CLIP1_SHIFT 6
#define B43_NPHY_C1_W1THRES B43_PHY_N(0x028) /* Core 1 W1 threshold */
#define B43_NPHY_C1_EDTHRES B43_PHY_N(0x029) /* Core 1 ED threshold */
#define B43_NPHY_C1_SMSIGTHRES B43_PHY_N(0x02A) /* Core 1 small sig threshold */
#define B43_NPHY_C1_NBCLIPTHRES B43_PHY_N(0x02B) /* Core 1 NB clip threshold */
#define B43_NPHY_C1_CLIP1THRES B43_PHY_N(0x02C) /* Core 1 clip1 threshold */
#define B43_NPHY_C1_CLIP2THRES B43_PHY_N(0x02D) /* Core 1 clip2 threshold */
#define B43_NPHY_C2_DESPWR B43_PHY_N(0x018 + 22) /* Core 2 desired power */
#define B43_NPHY_C2_CCK_DESPWR B43_PHY_N(0x019 + 22) /* Core 2 CCK desired power */
#define B43_NPHY_C2_BCLIPBKOFF B43_PHY_N(0x01A + 22) /* Core 2 barely clip backoff */
#define B43_NPHY_C2_CCK_BCLIPBKOFF B43_PHY_N(0x01B + 22) /* Core 2 CCK barely clip backoff */
#define B43_NPHY_C2_CGAINI B43_PHY_N(0x01C + 22) /* Core 2 compute gain info */
#define B43_NPHY_C2_CGAINI_GAINBKOFF 0x001F /* Gain backoff */
#define B43_NPHY_C2_CGAINI_CLIPGBKOFF 0x03E0 /* Clip gain backoff */
#define B43_NPHY_C2_CGAINI_GAINSTEP 0x1C00 /* Gain step */
#define B43_NPHY_C2_CGAINI_CL2DETECT 0x2000 /* Clip 2 detect mask */
#define B43_NPHY_C2_CCK_CGAINI B43_PHY_N(0x01D + 22) /* Core 2 CCK compute gain info */
#define B43_NPHY_C2_CCK_CGAINI_GAINBKOFF 0x001F /* Gain backoff */
#define B43_NPHY_C2_CCK_CGAINI_CLIPGBKOFF 0x01E0 /* CCK barely clip gain backoff */
#define B43_NPHY_C2_MINMAX_GAIN B43_PHY_N(0x01E + 22) /* Core 2 min/max gain */
#define B43_NPHY_C2_MINGAIN 0x00FF /* Minimum gain */
#define B43_NPHY_C2_MINGAIN_SHIFT 0
#define B43_NPHY_C2_MAXGAIN 0xFF00 /* Maximum gain */
#define B43_NPHY_C2_MAXGAIN_SHIFT 8
#define B43_NPHY_C2_CCK_MINMAX_GAIN B43_PHY_N(0x01F + 22) /* Core 2 CCK min/max gain */
#define B43_NPHY_C2_CCK_MINGAIN 0x00FF /* Minimum gain */
#define B43_NPHY_C2_CCK_MINGAIN_SHIFT 0
#define B43_NPHY_C2_CCK_MAXGAIN 0xFF00 /* Maximum gain */
#define B43_NPHY_C2_CCK_MAXGAIN_SHIFT 8
#define B43_NPHY_C2_INITGAIN B43_PHY_N(0x020 + 22) /* Core 2 initial gain code */
#define B43_NPHY_C2_INITGAIN_EXTLNA 0x0001 /* External LNA index */
#define B43_NPHY_C2_INITGAIN_LNA 0x0006 /* LNA index */
#define B43_NPHY_C2_INITGAIN_LNAIDX_SHIFT 1
#define B43_NPHY_C2_INITGAIN_HPVGA1 0x0078 /* HPVGA1 index */
#define B43_NPHY_C2_INITGAIN_HPVGA1_SHIFT 3
#define B43_NPHY_C2_INITGAIN_HPVGA2 0x0F80 /* HPVGA2 index */
#define B43_NPHY_C2_INITGAIN_HPVGA2_SHIFT 7
#define B43_NPHY_C2_INITGAIN_TRRX 0x1000 /* TR RX index */
#define B43_NPHY_C2_INITGAIN_TRTX 0x2000 /* TR TX index */
#define B43_NPHY_C2_CLIP1_HIGAIN B43_PHY_N(0x021 + 22) /* Core 2 clip1 high gain code */
#define B43_NPHY_C2_CLIP1_MEDGAIN B43_PHY_N(0x022 + 22) /* Core 2 clip1 medium gain code */
#define B43_NPHY_C2_CLIP1_LOGAIN B43_PHY_N(0x023 + 22) /* Core 2 clip1 low gain code */
#define B43_NPHY_C2_CLIP2_GAIN B43_PHY_N(0x024 + 22) /* Core 2 clip2 gain code */
#define B43_NPHY_C2_FILTERGAIN B43_PHY_N(0x025 + 22) /* Core 2 filter gain */
#define B43_NPHY_C2_LPF_QHPF_BW B43_PHY_N(0x026 + 22) /* Core 2 LPF Q HP F bandwidth */
#define B43_NPHY_C2_CLIPWBTHRES B43_PHY_N(0x027 + 22) /* Core 2 clip wideband threshold */
#define B43_NPHY_C2_CLIPWBTHRES_CLIP2 0x003F /* Clip 2 */
#define B43_NPHY_C2_CLIPWBTHRES_CLIP2_SHIFT 0
#define B43_NPHY_C2_CLIPWBTHRES_CLIP1 0x0FC0 /* Clip 1 */
#define B43_NPHY_C2_CLIPWBTHRES_CLIP1_SHIFT 6
#define B43_NPHY_C2_W1THRES B43_PHY_N(0x028 + 22) /* Core 2 W1 threshold */
#define B43_NPHY_C2_EDTHRES B43_PHY_N(0x029 + 22) /* Core 2 ED threshold */
#define B43_NPHY_C2_SMSIGTHRES B43_PHY_N(0x02A + 22) /* Core 2 small sig threshold */
#define B43_NPHY_C2_NBCLIPTHRES B43_PHY_N(0x02B + 22) /* Core 2 NB clip threshold */
#define B43_NPHY_C2_CLIP1THRES B43_PHY_N(0x02C + 22) /* Core 2 clip1 threshold */
#define B43_NPHY_C2_CLIP2THRES B43_PHY_N(0x02D + 22) /* Core 2 clip2 threshold */
#define B43_NPHY_CRS_THRES1 B43_PHY_N(0x044) /* CRS threshold 1 */
#define B43_NPHY_CRS_THRES2 B43_PHY_N(0x045) /* CRS threshold 2 */
#define B43_NPHY_CRS_THRES3 B43_PHY_N(0x046) /* CRS threshold 3 */
#define B43_NPHY_CRSCTL B43_PHY_N(0x047) /* CRS control */
#define B43_NPHY_DCFADDR B43_PHY_N(0x048) /* DC filter address */
#define B43_NPHY_RXF20_NUM0 B43_PHY_N(0x049) /* RX filter 20 numerator 0 */
#define B43_NPHY_RXF20_NUM1 B43_PHY_N(0x04A) /* RX filter 20 numerator 1 */
#define B43_NPHY_RXF20_NUM2 B43_PHY_N(0x04B) /* RX filter 20 numerator 2 */
#define B43_NPHY_RXF20_DENOM0 B43_PHY_N(0x04C) /* RX filter 20 denominator 0 */
#define B43_NPHY_RXF20_DENOM1 B43_PHY_N(0x04D) /* RX filter 20 denominator 1 */
#define B43_NPHY_RXF20_NUM10 B43_PHY_N(0x04E) /* RX filter 20 numerator 10 */
#define B43_NPHY_RXF20_NUM11 B43_PHY_N(0x04F) /* RX filter 20 numerator 11 */
#define B43_NPHY_RXF20_NUM12 B43_PHY_N(0x050) /* RX filter 20 numerator 12 */
#define B43_NPHY_RXF20_DENOM10 B43_PHY_N(0x051) /* RX filter 20 denominator 10 */
#define B43_NPHY_RXF20_DENOM11 B43_PHY_N(0x052) /* RX filter 20 denominator 11 */
#define B43_NPHY_RXF40_NUM0 B43_PHY_N(0x053) /* RX filter 40 numerator 0 */
#define B43_NPHY_RXF40_NUM1 B43_PHY_N(0x054) /* RX filter 40 numerator 1 */
#define B43_NPHY_RXF40_NUM2 B43_PHY_N(0x055) /* RX filter 40 numerator 2 */
#define B43_NPHY_RXF40_DENOM0 B43_PHY_N(0x056) /* RX filter 40 denominator 0 */
#define B43_NPHY_RXF40_DENOM1 B43_PHY_N(0x057) /* RX filter 40 denominator 1 */
#define B43_NPHY_RXF40_NUM10 B43_PHY_N(0x058) /* RX filter 40 numerator 10 */
#define B43_NPHY_RXF40_NUM11 B43_PHY_N(0x059) /* RX filter 40 numerator 11 */
#define B43_NPHY_RXF40_NUM12 B43_PHY_N(0x05A) /* RX filter 40 numerator 12 */
#define B43_NPHY_RXF40_DENOM10 B43_PHY_N(0x05B) /* RX filter 40 denominator 10 */
#define B43_NPHY_RXF40_DENOM11 B43_PHY_N(0x05C) /* RX filter 40 denominator 11 */
#define B43_NPHY_PPROC_RSTLEN B43_PHY_N(0x060) /* Packet processing reset length */
#define B43_NPHY_INITCARR_DLEN B43_PHY_N(0x061) /* Initial carrier detection length */
#define B43_NPHY_CLIP1CARR_DLEN B43_PHY_N(0x062) /* Clip1 carrier detection length */
#define B43_NPHY_CLIP2CARR_DLEN B43_PHY_N(0x063) /* Clip2 carrier detection length */
#define B43_NPHY_INITGAIN_SLEN B43_PHY_N(0x064) /* Initial gain settle length */
#define B43_NPHY_CLIP1GAIN_SLEN B43_PHY_N(0x065) /* Clip1 gain settle length */
#define B43_NPHY_CLIP2GAIN_SLEN B43_PHY_N(0x066) /* Clip2 gain settle length */
#define B43_NPHY_PACKGAIN_SLEN B43_PHY_N(0x067) /* Packet gain settle length */
#define B43_NPHY_CARRSRC_TLEN B43_PHY_N(0x068) /* Carrier search timeout length */
#define B43_NPHY_TISRC_TLEN B43_PHY_N(0x069) /* Timing search timeout length */
#define B43_NPHY_ENDROP_TLEN B43_PHY_N(0x06A) /* Energy drop timeout length */
#define B43_NPHY_CLIP1_NBDWELL_LEN B43_PHY_N(0x06B) /* Clip1 NB dwell length */
#define B43_NPHY_CLIP2_NBDWELL_LEN B43_PHY_N(0x06C) /* Clip2 NB dwell length */
#define B43_NPHY_W1CLIP1_DWELL_LEN B43_PHY_N(0x06D) /* W1 clip1 dwell length */
#define B43_NPHY_W1CLIP2_DWELL_LEN B43_PHY_N(0x06E) /* W1 clip2 dwell length */
#define B43_NPHY_W2CLIP1_DWELL_LEN B43_PHY_N(0x06F) /* W2 clip1 dwell length */
#define B43_NPHY_PLOAD_CSENSE_EXTLEN B43_PHY_N(0x070) /* Payload carrier sense extension length */
#define B43_NPHY_EDROP_CSENSE_EXTLEN B43_PHY_N(0x071) /* Energy drop carrier sense extension length */
#define B43_NPHY_TABLE_ADDR B43_PHY_N(0x072) /* Table address */
#define B43_NPHY_TABLE_DATALO B43_PHY_N(0x073) /* Table data low */
#define B43_NPHY_TABLE_DATAHI B43_PHY_N(0x074) /* Table data high */
#define B43_NPHY_WWISE_LENIDX B43_PHY_N(0x075) /* WWiSE length index */
#define B43_NPHY_TGNSYNC_LENIDX B43_PHY_N(0x076) /* TGNsync length index */
#define B43_NPHY_TXMACIF_HOLDOFF B43_PHY_N(0x077) /* TX MAC IF Hold off */
#define B43_NPHY_RFCTL_CMD B43_PHY_N(0x078) /* RF control (command) */
#define B43_NPHY_RFCTL_CMD_START 0x0001 /* Start sequence */
#define B43_NPHY_RFCTL_CMD_RXTX 0x0002 /* RX/TX */
#define B43_NPHY_RFCTL_CMD_CORESEL 0x0038 /* Core select */
#define B43_NPHY_RFCTL_CMD_CORESEL_SHIFT 3
#define B43_NPHY_RFCTL_CMD_PORFORCE 0x0040 /* POR force */
#define B43_NPHY_RFCTL_CMD_OEPORFORCE 0x0080 /* OE POR force */
#define B43_NPHY_RFCTL_CMD_RXEN 0x0100 /* RX enable */
#define B43_NPHY_RFCTL_CMD_TXEN 0x0200 /* TX enable */
#define B43_NPHY_RFCTL_CMD_CHIP0PU 0x0400 /* Chip0 PU */
#define B43_NPHY_RFCTL_CMD_SEQENCORE 0xF000 /* Seq en core */
#define B43_NPHY_RFCTL_CMD_SEQENCORE_SHIFT 12
#define B43_NPHY_RFCTL_RSSIO1 B43_PHY_N(0x07A) /* RF control (RSSI others 1) */
#define B43_NPHY_RFCTL_RSSIO1_RXPD 0x0001 /* RX PD */
#define B43_NPHY_RFCTL_RSSIO1_TXPD 0x0002 /* TX PD */
#define B43_NPHY_RFCTL_RSSIO1_PAPD 0x0004 /* PA PD */
#define B43_NPHY_RFCTL_RSSIO1_RSSICTL 0x0030 /* RSSI control */
#define B43_NPHY_RFCTL_RSSIO1_LPFBW 0x00C0 /* LPF bandwidth */
#define B43_NPHY_RFCTL_RSSIO1_HPFBWHI 0x0100 /* HPF bandwidth high */
#define B43_NPHY_RFCTL_RSSIO1_HIQDISCO 0x0200 /* HIQ dis core */
#define B43_NPHY_RFCTL_RXG1 B43_PHY_N(0x07B) /* RF control (RX gain 1) */
#define B43_NPHY_RFCTL_TXG1 B43_PHY_N(0x07C) /* RF control (TX gain 1) */
#define B43_NPHY_RFCTL_RSSIO2 B43_PHY_N(0x07D) /* RF control (RSSI others 2) */
#define B43_NPHY_RFCTL_RSSIO2_RXPD 0x0001 /* RX PD */
#define B43_NPHY_RFCTL_RSSIO2_TXPD 0x0002 /* TX PD */
#define B43_NPHY_RFCTL_RSSIO2_PAPD 0x0004 /* PA PD */
#define B43_NPHY_RFCTL_RSSIO2_RSSICTL 0x0030 /* RSSI control */
#define B43_NPHY_RFCTL_RSSIO2_LPFBW 0x00C0 /* LPF bandwidth */
#define B43_NPHY_RFCTL_RSSIO2_HPFBWHI 0x0100 /* HPF bandwidth high */
#define B43_NPHY_RFCTL_RSSIO2_HIQDISCO 0x0200 /* HIQ dis core */
#define B43_NPHY_RFCTL_RXG2 B43_PHY_N(0x07E) /* RF control (RX gain 2) */
#define B43_NPHY_RFCTL_TXG2 B43_PHY_N(0x07F) /* RF control (TX gain 2) */
#define B43_NPHY_RFCTL_RSSIO3 B43_PHY_N(0x080) /* RF control (RSSI others 3) */
#define B43_NPHY_RFCTL_RSSIO3_RXPD 0x0001 /* RX PD */
#define B43_NPHY_RFCTL_RSSIO3_TXPD 0x0002 /* TX PD */
#define B43_NPHY_RFCTL_RSSIO3_PAPD 0x0004 /* PA PD */
#define B43_NPHY_RFCTL_RSSIO3_RSSICTL 0x0030 /* RSSI control */
#define B43_NPHY_RFCTL_RSSIO3_LPFBW 0x00C0 /* LPF bandwidth */
#define B43_NPHY_RFCTL_RSSIO3_HPFBWHI 0x0100 /* HPF bandwidth high */
#define B43_NPHY_RFCTL_RSSIO3_HIQDISCO 0x0200 /* HIQ dis core */
#define B43_NPHY_RFCTL_RXG3 B43_PHY_N(0x081) /* RF control (RX gain 3) */
#define B43_NPHY_RFCTL_TXG3 B43_PHY_N(0x082) /* RF control (TX gain 3) */
#define B43_NPHY_RFCTL_RSSIO4 B43_PHY_N(0x083) /* RF control (RSSI others 4) */
#define B43_NPHY_RFCTL_RSSIO4_RXPD 0x0001 /* RX PD */
#define B43_NPHY_RFCTL_RSSIO4_TXPD 0x0002 /* TX PD */
#define B43_NPHY_RFCTL_RSSIO4_PAPD 0x0004 /* PA PD */
#define B43_NPHY_RFCTL_RSSIO4_RSSICTL 0x0030 /* RSSI control */
#define B43_NPHY_RFCTL_RSSIO4_LPFBW 0x00C0 /* LPF bandwidth */
#define B43_NPHY_RFCTL_RSSIO4_HPFBWHI 0x0100 /* HPF bandwidth high */
#define B43_NPHY_RFCTL_RSSIO4_HIQDISCO 0x0200 /* HIQ dis core */
#define B43_NPHY_RFCTL_RXG4 B43_PHY_N(0x084) /* RF control (RX gain 4) */
#define B43_NPHY_RFCTL_TXG4 B43_PHY_N(0x085) /* RF control (TX gain 4) */
#define B43_NPHY_C1_TXIQ_COMP_OFF B43_PHY_N(0x087) /* Core 1 TX I/Q comp offset */
#define B43_NPHY_C2_TXIQ_COMP_OFF B43_PHY_N(0x088) /* Core 2 TX I/Q comp offset */
#define B43_NPHY_C1_TXCTL B43_PHY_N(0x08B) /* Core 1 TX control */
#define B43_NPHY_C2_TXCTL B43_PHY_N(0x08C) /* Core 2 TX control */
#define B43_NPHY_SCRAM_SIGCTL B43_PHY_N(0x090) /* Scran signal control */
#define B43_NPHY_SCRAM_SIGCTL_INITST 0x007F /* Initial state value */
#define B43_NPHY_SCRAM_SIGCTL_INITST_SHIFT 0
#define B43_NPHY_SCRAM_SIGCTL_SCM 0x0080 /* Scram control mode */
#define B43_NPHY_SCRAM_SIGCTL_SICE 0x0100 /* Scram index control enable */
#define B43_NPHY_SCRAM_SIGCTL_START 0xFE00 /* Scram start bit */
#define B43_NPHY_SCRAM_SIGCTL_START_SHIFT 9
#define B43_NPHY_RFCTL_INTC1 B43_PHY_N(0x091) /* RF control (intc 1) */
#define B43_NPHY_RFCTL_INTC2 B43_PHY_N(0x092) /* RF control (intc 2) */
#define B43_NPHY_RFCTL_INTC3 B43_PHY_N(0x093) /* RF control (intc 3) */
#define B43_NPHY_RFCTL_INTC4 B43_PHY_N(0x094) /* RF control (intc 4) */
#define B43_NPHY_NRDTO_WWISE B43_PHY_N(0x095) /* # datatones WWiSE */
#define B43_NPHY_NRDTO_TGNSYNC B43_PHY_N(0x096) /* # datatones TGNsync */
#define B43_NPHY_SIGFMOD_WWISE B43_PHY_N(0x097) /* Signal field mod WWiSE */
#define B43_NPHY_LEG_SIGFMOD_11N B43_PHY_N(0x098) /* Legacy signal field mod 11n */
#define B43_NPHY_HT_SIGFMOD_11N B43_PHY_N(0x099) /* HT signal field mod 11n */
#define B43_NPHY_C1_RXIQ_COMPA0 B43_PHY_N(0x09A) /* Core 1 RX I/Q comp A0 */
#define B43_NPHY_C1_RXIQ_COMPB0 B43_PHY_N(0x09B) /* Core 1 RX I/Q comp B0 */
#define B43_NPHY_C2_RXIQ_COMPA1 B43_PHY_N(0x09C) /* Core 2 RX I/Q comp A1 */
#define B43_NPHY_C2_RXIQ_COMPB1 B43_PHY_N(0x09D) /* Core 2 RX I/Q comp B1 */
#define B43_NPHY_RXCTL B43_PHY_N(0x0A0) /* RX control */
#define B43_NPHY_RXCTL_BSELU20 0x0010 /* Band select upper 20 */
#define B43_NPHY_RXCTL_RIFSEN 0x0080 /* RIFS enable */
#define B43_NPHY_RFSEQMODE B43_PHY_N(0x0A1) /* RF seq mode */
#define B43_NPHY_RFSEQMODE_CAOVER 0x0001 /* Core active override */
#define B43_NPHY_RFSEQMODE_TROVER 0x0002 /* Trigger override */
#define B43_NPHY_RFSEQCA B43_PHY_N(0x0A2) /* RF seq core active */
#define B43_NPHY_RFSEQCA_TXEN 0x000F /* TX enable */
#define B43_NPHY_RFSEQCA_TXEN_SHIFT 0
#define B43_NPHY_RFSEQCA_RXEN 0x00F0 /* RX enable */
#define B43_NPHY_RFSEQCA_RXEN_SHIFT 4
#define B43_NPHY_RFSEQCA_TXDIS 0x0F00 /* TX disable */
#define B43_NPHY_RFSEQCA_TXDIS_SHIFT 8
#define B43_NPHY_RFSEQCA_RXDIS 0xF000 /* RX disable */
#define B43_NPHY_RFSEQCA_RXDIS_SHIFT 12
#define B43_NPHY_RFSEQTR B43_PHY_N(0x0A3) /* RF seq trigger */
#define B43_NPHY_RFSEQTR_RX2TX 0x0001 /* RX2TX */
#define B43_NPHY_RFSEQTR_TX2RX 0x0002 /* TX2RX */
#define B43_NPHY_RFSEQTR_UPGH 0x0004 /* Update gain H */
#define B43_NPHY_RFSEQTR_UPGL 0x0008 /* Update gain L */
#define B43_NPHY_RFSEQTR_UPGU 0x0010 /* Update gain U */
#define B43_NPHY_RFSEQTR_RST2RX 0x0020 /* Reset to RX */
#define B43_NPHY_RFSEQST B43_PHY_N(0x0A4) /* RF seq status. Values same as trigger. */
#define B43_NPHY_AFECTL_OVER B43_PHY_N(0x0A5) /* AFE control override */
#define B43_NPHY_AFECTL_C1 B43_PHY_N(0x0A6) /* AFE control core 1 */
#define B43_NPHY_AFECTL_C2 B43_PHY_N(0x0A7) /* AFE control core 2 */
#define B43_NPHY_AFECTL_C3 B43_PHY_N(0x0A8) /* AFE control core 3 */
#define B43_NPHY_AFECTL_C4 B43_PHY_N(0x0A9) /* AFE control core 4 */
#define B43_NPHY_AFECTL_DACGAIN1 B43_PHY_N(0x0AA) /* AFE control DAC gain 1 */
#define B43_NPHY_AFECTL_DACGAIN2 B43_PHY_N(0x0AB) /* AFE control DAC gain 2 */
#define B43_NPHY_AFECTL_DACGAIN3 B43_PHY_N(0x0AC) /* AFE control DAC gain 3 */
#define B43_NPHY_AFECTL_DACGAIN4 B43_PHY_N(0x0AD) /* AFE control DAC gain 4 */
#define B43_NPHY_STR_ADDR1 B43_PHY_N(0x0AE) /* STR address 1 */
#define B43_NPHY_STR_ADDR2 B43_PHY_N(0x0AF) /* STR address 2 */
#define B43_NPHY_CLASSCTL B43_PHY_N(0x0B0) /* Classifier control */
#define B43_NPHY_CLASSCTL_CCKEN 0x0001 /* CCK enable */
#define B43_NPHY_CLASSCTL_OFDMEN 0x0002 /* OFDM enable */
#define B43_NPHY_CLASSCTL_WAITEDEN 0x0004 /* Waited enable */
#define B43_NPHY_IQFLIP B43_PHY_N(0x0B1) /* I/Q flip */
#define B43_NPHY_IQFLIP_ADC1 0x0001 /* ADC1 */
#define B43_NPHY_IQFLIP_ADC2 0x0010 /* ADC2 */
#define B43_NPHY_SISO_SNR_THRES B43_PHY_N(0x0B2) /* SISO SNR threshold */
#define B43_NPHY_SIGMA_N_MULT B43_PHY_N(0x0B3) /* Sigma N multiplier */
#define B43_NPHY_TXMACDELAY B43_PHY_N(0x0B4) /* TX MAC delay */
#define B43_NPHY_TXFRAMEDELAY B43_PHY_N(0x0B5) /* TX frame delay */
#define B43_NPHY_MLPARM B43_PHY_N(0x0B6) /* ML parameters */
#define B43_NPHY_MLCTL B43_PHY_N(0x0B7) /* ML control */
#define B43_NPHY_WWISE_20NCYCDAT B43_PHY_N(0x0B8) /* WWiSE 20 N cyc data */
#define B43_NPHY_WWISE_40NCYCDAT B43_PHY_N(0x0B9) /* WWiSE 40 N cyc data */
#define B43_NPHY_TGNSYNC_20NCYCDAT B43_PHY_N(0x0BA) /* TGNsync 20 N cyc data */
#define B43_NPHY_TGNSYNC_40NCYCDAT B43_PHY_N(0x0BB) /* TGNsync 40 N cyc data */
#define B43_NPHY_INITSWIZP B43_PHY_N(0x0BC) /* Initial swizzle pattern */
#define B43_NPHY_TXTAILCNT B43_PHY_N(0x0BD) /* TX tail count value */
#define B43_NPHY_BPHY_CTL1 B43_PHY_N(0x0BE) /* B PHY control 1 */
#define B43_NPHY_BPHY_CTL2 B43_PHY_N(0x0BF) /* B PHY control 2 */
#define B43_NPHY_BPHY_CTL2_LUT 0x001F /* LUT index */
#define B43_NPHY_BPHY_CTL2_LUT_SHIFT 0
#define B43_NPHY_BPHY_CTL2_MACDEL 0x7FE0 /* MAC delay */
#define B43_NPHY_BPHY_CTL2_MACDEL_SHIFT 5
#define B43_NPHY_IQLOCAL_CMD B43_PHY_N(0x0C0) /* I/Q LO cal command */
#define B43_NPHY_IQLOCAL_CMD_EN 0x8000
#define B43_NPHY_IQLOCAL_CMDNNUM B43_PHY_N(0x0C1) /* I/Q LO cal command N num */
#define B43_NPHY_IQLOCAL_CMDGCTL B43_PHY_N(0x0C2) /* I/Q LO cal command G control */
#define B43_NPHY_SAMP_CMD B43_PHY_N(0x0C3) /* Sample command */
#define B43_NPHY_SAMP_CMD_STOP 0x0002 /* Stop */
#define B43_NPHY_SAMP_LOOPCNT B43_PHY_N(0x0C4) /* Sample loop count */
#define B43_NPHY_SAMP_WAITCNT B43_PHY_N(0x0C5) /* Sample wait count */
#define B43_NPHY_SAMP_DEPCNT B43_PHY_N(0x0C6) /* Sample depth count */
#define B43_NPHY_SAMP_STAT B43_PHY_N(0x0C7) /* Sample status */
#define B43_NPHY_GPIO_LOOEN B43_PHY_N(0x0C8) /* GPIO low out enable */
#define B43_NPHY_GPIO_HIOEN B43_PHY_N(0x0C9) /* GPIO high out enable */
#define B43_NPHY_GPIO_SEL B43_PHY_N(0x0CA) /* GPIO select */
#define B43_NPHY_GPIO_CLKCTL B43_PHY_N(0x0CB) /* GPIO clock control */
#define B43_NPHY_TXF_20CO_AS0 B43_PHY_N(0x0CC) /* TX filter 20 coeff A stage 0 */
#define B43_NPHY_TXF_20CO_AS1 B43_PHY_N(0x0CD) /* TX filter 20 coeff A stage 1 */
#define B43_NPHY_TXF_20CO_AS2 B43_PHY_N(0x0CE) /* TX filter 20 coeff A stage 2 */
#define B43_NPHY_TXF_20CO_B32S0 B43_PHY_N(0x0CF) /* TX filter 20 coeff B32 stage 0 */
#define B43_NPHY_TXF_20CO_B1S0 B43_PHY_N(0x0D0) /* TX filter 20 coeff B1 stage 0 */
#define B43_NPHY_TXF_20CO_B32S1 B43_PHY_N(0x0D1) /* TX filter 20 coeff B32 stage 1 */
#define B43_NPHY_TXF_20CO_B1S1 B43_PHY_N(0x0D2) /* TX filter 20 coeff B1 stage 1 */
#define B43_NPHY_TXF_20CO_B32S2 B43_PHY_N(0x0D3) /* TX filter 20 coeff B32 stage 2 */
#define B43_NPHY_TXF_20CO_B1S2 B43_PHY_N(0x0D4) /* TX filter 20 coeff B1 stage 2 */
#define B43_NPHY_SIGFLDTOL B43_PHY_N(0x0D5) /* Signal fld tolerance */
#define B43_NPHY_TXSERFLD B43_PHY_N(0x0D6) /* TX service field */
#define B43_NPHY_AFESEQ_RX2TX_PUD B43_PHY_N(0x0D7) /* AFE seq RX2TX power up/down delay */
#define B43_NPHY_AFESEQ_TX2RX_PUD B43_PHY_N(0x0D8) /* AFE seq TX2RX power up/down delay */
#define B43_NPHY_TGNSYNC_SCRAMI0 B43_PHY_N(0x0D9) /* TGNsync scram init 0 */
#define B43_NPHY_TGNSYNC_SCRAMI1 B43_PHY_N(0x0DA) /* TGNsync scram init 1 */
#define B43_NPHY_INITSWIZPATTLEG B43_PHY_N(0x0DB) /* Initial swizzle pattern leg */
#define B43_NPHY_BPHY_CTL3 B43_PHY_N(0x0DC) /* B PHY control 3 */
#define B43_NPHY_BPHY_CTL3_SCALE 0x00FF /* Scale */
#define B43_NPHY_BPHY_CTL3_SCALE_SHIFT 0
#define B43_NPHY_BPHY_CTL3_FSC 0xFF00 /* Frame start count value */
#define B43_NPHY_BPHY_CTL3_FSC_SHIFT 8
#define B43_NPHY_BPHY_CTL4 B43_PHY_N(0x0DD) /* B PHY control 4 */
#define B43_NPHY_C1_TXBBMULT B43_PHY_N(0x0DE) /* Core 1 TX BB multiplier */
#define B43_NPHY_C2_TXBBMULT B43_PHY_N(0x0DF) /* Core 2 TX BB multiplier */
#define B43_NPHY_TXF_40CO_AS0 B43_PHY_N(0x0E1) /* TX filter 40 coeff A stage 0 */
#define B43_NPHY_TXF_40CO_AS1 B43_PHY_N(0x0E2) /* TX filter 40 coeff A stage 1 */
#define B43_NPHY_TXF_40CO_AS2 B43_PHY_N(0x0E3) /* TX filter 40 coeff A stage 2 */
#define B43_NPHY_TXF_40CO_B32S0 B43_PHY_N(0x0E4) /* TX filter 40 coeff B32 stage 0 */
#define B43_NPHY_TXF_40CO_B1S0 B43_PHY_N(0x0E5) /* TX filter 40 coeff B1 stage 0 */
#define B43_NPHY_TXF_40CO_B32S1 B43_PHY_N(0x0E6) /* TX filter 40 coeff B32 stage 1 */
#define B43_NPHY_TXF_40CO_B1S1 B43_PHY_N(0x0E7) /* TX filter 40 coeff B1 stage 1 */
#define B43_NPHY_TXF_40CO_B32S2 B43_PHY_N(0x0E8) /* TX filter 40 coeff B32 stage 2 */
#define B43_NPHY_TXF_40CO_B1S2 B43_PHY_N(0x0E9) /* TX filter 40 coeff B1 stage 2 */
#define B43_NPHY_BIST_STAT2 B43_PHY_N(0x0EA) /* BIST status 2 */
#define B43_NPHY_BIST_STAT3 B43_PHY_N(0x0EB) /* BIST status 3 */
#define B43_NPHY_RFCTL_OVER B43_PHY_N(0x0EC) /* RF control override */
#define B43_NPHY_MIMOCFG B43_PHY_N(0x0ED) /* MIMO config */
#define B43_NPHY_MIMOCFG_GFMIX 0x0004 /* Greenfield or mixed mode */
#define B43_NPHY_MIMOCFG_AUTO 0x0100 /* Greenfield/mixed mode auto */
#define B43_NPHY_RADAR_BLNKCTL B43_PHY_N(0x0EE) /* Radar blank control */
#define B43_NPHY_A0RADAR_FIFOCTL B43_PHY_N(0x0EF) /* Antenna 0 radar FIFO control */
#define B43_NPHY_A1RADAR_FIFOCTL B43_PHY_N(0x0F0) /* Antenna 1 radar FIFO control */
#define B43_NPHY_A0RADAR_FIFODAT B43_PHY_N(0x0F1) /* Antenna 0 radar FIFO data */
#define B43_NPHY_A1RADAR_FIFODAT B43_PHY_N(0x0F2) /* Antenna 1 radar FIFO data */
#define B43_NPHY_RADAR_THRES0 B43_PHY_N(0x0F3) /* Radar threshold 0 */
#define B43_NPHY_RADAR_THRES1 B43_PHY_N(0x0F4) /* Radar threshold 1 */
#define B43_NPHY_RADAR_THRES0R B43_PHY_N(0x0F5) /* Radar threshold 0R */
#define B43_NPHY_RADAR_THRES1R B43_PHY_N(0x0F6) /* Radar threshold 1R */
#define B43_NPHY_CSEN_20IN40_DLEN B43_PHY_N(0x0F7) /* Carrier sense 20 in 40 dwell length */
#define B43_NPHY_RFCTL_LUT_TRSW_LO1 B43_PHY_N(0x0F8) /* RF control LUT TRSW lower 1 */
#define B43_NPHY_RFCTL_LUT_TRSW_UP1 B43_PHY_N(0x0F9) /* RF control LUT TRSW upper 1 */
#define B43_NPHY_RFCTL_LUT_TRSW_LO2 B43_PHY_N(0x0FA) /* RF control LUT TRSW lower 2 */
#define B43_NPHY_RFCTL_LUT_TRSW_UP2 B43_PHY_N(0x0FB) /* RF control LUT TRSW upper 2 */
#define B43_NPHY_RFCTL_LUT_TRSW_LO3 B43_PHY_N(0x0FC) /* RF control LUT TRSW lower 3 */
#define B43_NPHY_RFCTL_LUT_TRSW_UP3 B43_PHY_N(0x0FD) /* RF control LUT TRSW upper 3 */
#define B43_NPHY_RFCTL_LUT_TRSW_LO4 B43_PHY_N(0x0FE) /* RF control LUT TRSW lower 4 */
#define B43_NPHY_RFCTL_LUT_TRSW_UP4 B43_PHY_N(0x0FF) /* RF control LUT TRSW upper 4 */
#define B43_NPHY_RFCTL_LUT_LNAPA1 B43_PHY_N(0x100) /* RF control LUT LNA PA 1 */
#define B43_NPHY_RFCTL_LUT_LNAPA2 B43_PHY_N(0x101) /* RF control LUT LNA PA 2 */
#define B43_NPHY_RFCTL_LUT_LNAPA3 B43_PHY_N(0x102) /* RF control LUT LNA PA 3 */
#define B43_NPHY_RFCTL_LUT_LNAPA4 B43_PHY_N(0x103) /* RF control LUT LNA PA 4 */
#define B43_NPHY_TGNSYNC_CRCM0 B43_PHY_N(0x104) /* TGNsync CRC mask 0 */
#define B43_NPHY_TGNSYNC_CRCM1 B43_PHY_N(0x105) /* TGNsync CRC mask 1 */
#define B43_NPHY_TGNSYNC_CRCM2 B43_PHY_N(0x106) /* TGNsync CRC mask 2 */
#define B43_NPHY_TGNSYNC_CRCM3 B43_PHY_N(0x107) /* TGNsync CRC mask 3 */
#define B43_NPHY_TGNSYNC_CRCM4 B43_PHY_N(0x108) /* TGNsync CRC mask 4 */
#define B43_NPHY_CRCPOLY B43_PHY_N(0x109) /* CRC polynomial */
#define B43_NPHY_SIGCNT B43_PHY_N(0x10A) /* # sig count */
#define B43_NPHY_SIGSTARTBIT_CTL B43_PHY_N(0x10B) /* Sig start bit control */
#define B43_NPHY_CRCPOLY_ORDER B43_PHY_N(0x10C) /* CRC polynomial order */
#define B43_NPHY_RFCTL_CST0 B43_PHY_N(0x10D) /* RF control core swap table 0 */
#define B43_NPHY_RFCTL_CST1 B43_PHY_N(0x10E) /* RF control core swap table 1 */
#define B43_NPHY_RFCTL_CST2O B43_PHY_N(0x10F) /* RF control core swap table 2 + others */
#define B43_NPHY_BPHY_CTL5 B43_PHY_N(0x111) /* B PHY control 5 */
#define B43_NPHY_RFSEQ_LPFBW B43_PHY_N(0x112) /* RF seq LPF bandwidth */
#define B43_NPHY_TSSIBIAS1 B43_PHY_N(0x114) /* TSSI bias val 1 */
#define B43_NPHY_TSSIBIAS2 B43_PHY_N(0x115) /* TSSI bias val 2 */
#define B43_NPHY_TSSIBIAS_BIAS 0x00FF /* Bias */
#define B43_NPHY_TSSIBIAS_BIAS_SHIFT 0
#define B43_NPHY_TSSIBIAS_VAL 0xFF00 /* Value */
#define B43_NPHY_TSSIBIAS_VAL_SHIFT 8
#define B43_NPHY_ESTPWR1 B43_PHY_N(0x118) /* Estimated power 1 */
#define B43_NPHY_ESTPWR2 B43_PHY_N(0x119) /* Estimated power 2 */
#define B43_NPHY_ESTPWR_PWR 0x00FF /* Estimated power */
#define B43_NPHY_ESTPWR_PWR_SHIFT 0
#define B43_NPHY_ESTPWR_VALID 0x0100 /* Estimated power valid */
#define B43_NPHY_TSSI_MAXTXFDT B43_PHY_N(0x11C) /* TSSI max TX frame delay time */
#define B43_NPHY_TSSI_MAXTXFDT_VAL 0x00FF /* max TX frame delay time */
#define B43_NPHY_TSSI_MAXTXFDT_VAL_SHIFT 0
#define B43_NPHY_TSSI_MAXTDT B43_PHY_N(0x11D) /* TSSI max TSSI delay time */
#define B43_NPHY_TSSI_MAXTDT_VAL 0x00FF /* max TSSI delay time */
#define B43_NPHY_TSSI_MAXTDT_VAL_SHIFT 0
#define B43_NPHY_ITSSI1 B43_PHY_N(0x11E) /* TSSI idle 1 */
#define B43_NPHY_ITSSI2 B43_PHY_N(0x11F) /* TSSI idle 2 */
#define B43_NPHY_ITSSI_VAL 0x00FF /* Idle TSSI */
#define B43_NPHY_ITSSI_VAL_SHIFT 0
#define B43_NPHY_TSSIMODE B43_PHY_N(0x122) /* TSSI mode */
#define B43_NPHY_TSSIMODE_EN 0x0001 /* TSSI enable */
#define B43_NPHY_TSSIMODE_PDEN 0x0002 /* Power det enable */
#define B43_NPHY_RXMACIFM B43_PHY_N(0x123) /* RX Macif mode */
#define B43_NPHY_CRSIT_COCNT_LO B43_PHY_N(0x124) /* CRS idle time CRS-on count (low) */
#define B43_NPHY_CRSIT_COCNT_HI B43_PHY_N(0x125) /* CRS idle time CRS-on count (high) */
#define B43_NPHY_CRSIT_MTCNT_LO B43_PHY_N(0x126) /* CRS idle time measure time count (low) */
#define B43_NPHY_CRSIT_MTCNT_HI B43_PHY_N(0x127) /* CRS idle time measure time count (high) */
#define B43_NPHY_SAMTWC B43_PHY_N(0x128) /* Sample tail wait count */
#define B43_NPHY_IQEST_CMD B43_PHY_N(0x129) /* I/Q estimate command */
#define B43_NPHY_IQEST_CMD_START 0x0001 /* Start */
#define B43_NPHY_IQEST_CMD_MODE 0x0002 /* Mode */
#define B43_NPHY_IQEST_WT B43_PHY_N(0x12A) /* I/Q estimate wait time */
#define B43_NPHY_IQEST_WT_VAL 0x00FF /* Wait time */
#define B43_NPHY_IQEST_WT_VAL_SHIFT 0
#define B43_NPHY_IQEST_SAMCNT B43_PHY_N(0x12B) /* I/Q estimate sample count */
#define B43_NPHY_IQEST_IQACC_LO0 B43_PHY_N(0x12C) /* I/Q estimate I/Q acc lo 0 */
#define B43_NPHY_IQEST_IQACC_HI0 B43_PHY_N(0x12D) /* I/Q estimate I/Q acc hi 0 */
#define B43_NPHY_IQEST_IPACC_LO0 B43_PHY_N(0x12E) /* I/Q estimate I power acc lo 0 */
#define B43_NPHY_IQEST_IPACC_HI0 B43_PHY_N(0x12F) /* I/Q estimate I power acc hi 0 */
#define B43_NPHY_IQEST_QPACC_LO0 B43_PHY_N(0x130) /* I/Q estimate Q power acc lo 0 */
#define B43_NPHY_IQEST_QPACC_HI0 B43_PHY_N(0x131) /* I/Q estimate Q power acc hi 0 */
#define B43_NPHY_IQEST_IQACC_LO1 B43_PHY_N(0x134) /* I/Q estimate I/Q acc lo 1 */
#define B43_NPHY_IQEST_IQACC_HI1 B43_PHY_N(0x135) /* I/Q estimate I/Q acc hi 1 */
#define B43_NPHY_IQEST_IPACC_LO1 B43_PHY_N(0x136) /* I/Q estimate I power acc lo 1 */
#define B43_NPHY_IQEST_IPACC_HI1 B43_PHY_N(0x137) /* I/Q estimate I power acc hi 1 */
#define B43_NPHY_IQEST_QPACC_LO1 B43_PHY_N(0x138) /* I/Q estimate Q power acc lo 1 */
#define B43_NPHY_IQEST_QPACC_HI1 B43_PHY_N(0x139) /* I/Q estimate Q power acc hi 1 */
#define B43_NPHY_MIMO_CRSTXEXT B43_PHY_N(0x13A) /* MIMO PHY CRS TX extension */
#define B43_NPHY_PWRDET1 B43_PHY_N(0x13B) /* Power det 1 */
#define B43_NPHY_PWRDET2 B43_PHY_N(0x13C) /* Power det 2 */
#define B43_NPHY_MAXRSSI_DTIME B43_PHY_N(0x13F) /* RSSI max RSSI delay time */
#define B43_NPHY_PIL_DW0 B43_PHY_N(0x141) /* Pilot data weight 0 */
#define B43_NPHY_PIL_DW1 B43_PHY_N(0x142) /* Pilot data weight 1 */
#define B43_NPHY_PIL_DW2 B43_PHY_N(0x143) /* Pilot data weight 2 */
#define B43_NPHY_PIL_DW_BPSK 0x000F /* BPSK */
#define B43_NPHY_PIL_DW_BPSK_SHIFT 0
#define B43_NPHY_PIL_DW_QPSK 0x00F0 /* QPSK */
#define B43_NPHY_PIL_DW_QPSK_SHIFT 4
#define B43_NPHY_PIL_DW_16QAM 0x0F00 /* 16-QAM */
#define B43_NPHY_PIL_DW_16QAM_SHIFT 8
#define B43_NPHY_PIL_DW_64QAM 0xF000 /* 64-QAM */
#define B43_NPHY_PIL_DW_64QAM_SHIFT 12
#define B43_NPHY_FMDEM_CFG B43_PHY_N(0x144) /* FM demodulation config */
#define B43_NPHY_PHASETR_A0 B43_PHY_N(0x145) /* Phase track alpha 0 */
#define B43_NPHY_PHASETR_A1 B43_PHY_N(0x146) /* Phase track alpha 1 */
#define B43_NPHY_PHASETR_A2 B43_PHY_N(0x147) /* Phase track alpha 2 */
#define B43_NPHY_PHASETR_B0 B43_PHY_N(0x148) /* Phase track beta 0 */
#define B43_NPHY_PHASETR_B1 B43_PHY_N(0x149) /* Phase track beta 1 */
#define B43_NPHY_PHASETR_B2 B43_PHY_N(0x14A) /* Phase track beta 2 */
#define B43_NPHY_PHASETR_CHG0 B43_PHY_N(0x14B) /* Phase track change 0 */
#define B43_NPHY_PHASETR_CHG1 B43_PHY_N(0x14C) /* Phase track change 1 */
#define B43_NPHY_PHASETW_OFF B43_PHY_N(0x14D) /* Phase track offset */
#define B43_NPHY_RFCTL_DBG B43_PHY_N(0x14E) /* RF control debug */
#define B43_NPHY_CCK_SHIFTB_REF B43_PHY_N(0x150) /* CCK shiftbits reference var */
#define B43_NPHY_OVER_DGAIN0 B43_PHY_N(0x152) /* Override digital gain 0 */
#define B43_NPHY_OVER_DGAIN1 B43_PHY_N(0x153) /* Override digital gain 1 */
#define B43_NPHY_OVER_DGAIN_FDGV 0x0007 /* Force digital gain value */
#define B43_NPHY_OVER_DGAIN_FDGV_SHIFT 0
#define B43_NPHY_OVER_DGAIN_FDGEN 0x0008 /* Force digital gain enable */
#define B43_NPHY_OVER_DGAIN_CCKDGECV 0xFF00 /* CCK digital gain enable count value */
#define B43_NPHY_OVER_DGAIN_CCKDGECV_SHIFT 8
#define B43_NPHY_BIST_STAT4 B43_PHY_N(0x156) /* BIST status 4 */
#define B43_NPHY_RADAR_MAL B43_PHY_N(0x157) /* Radar MA length */
#define B43_NPHY_RADAR_SRCCTL B43_PHY_N(0x158) /* Radar search control */
#define B43_NPHY_VLD_DTSIG B43_PHY_N(0x159) /* VLD data tones sig */
#define B43_NPHY_VLD_DTDAT B43_PHY_N(0x15A) /* VLD data tones data */
#define B43_NPHY_C1_BPHY_RXIQCA0 B43_PHY_N(0x15B) /* Core 1 B PHY RX I/Q comp A0 */
#define B43_NPHY_C1_BPHY_RXIQCB0 B43_PHY_N(0x15C) /* Core 1 B PHY RX I/Q comp B0 */
#define B43_NPHY_C2_BPHY_RXIQCA1 B43_PHY_N(0x15D) /* Core 2 B PHY RX I/Q comp A1 */
#define B43_NPHY_C2_BPHY_RXIQCB1 B43_PHY_N(0x15E) /* Core 2 B PHY RX I/Q comp B1 */
#define B43_NPHY_FREQGAIN0 B43_PHY_N(0x160) /* Frequency gain 0 */
#define B43_NPHY_FREQGAIN1 B43_PHY_N(0x161) /* Frequency gain 1 */
#define B43_NPHY_FREQGAIN2 B43_PHY_N(0x162) /* Frequency gain 2 */
#define B43_NPHY_FREQGAIN3 B43_PHY_N(0x163) /* Frequency gain 3 */
#define B43_NPHY_FREQGAIN4 B43_PHY_N(0x164) /* Frequency gain 4 */
#define B43_NPHY_FREQGAIN5 B43_PHY_N(0x165) /* Frequency gain 5 */
#define B43_NPHY_FREQGAIN6 B43_PHY_N(0x166) /* Frequency gain 6 */
#define B43_NPHY_FREQGAIN7 B43_PHY_N(0x167) /* Frequency gain 7 */
#define B43_NPHY_FREQGAIN_BYPASS B43_PHY_N(0x168) /* Frequency gain bypass */
#define B43_NPHY_TRLOSS B43_PHY_N(0x169) /* TR loss value */
#define B43_NPHY_C1_ADCCLIP B43_PHY_N(0x16A) /* Core 1 ADC clip */
#define B43_NPHY_C2_ADCCLIP B43_PHY_N(0x16B) /* Core 2 ADC clip */
#define B43_NPHY_LTRN_OFFGAIN B43_PHY_N(0x16F) /* LTRN offset gain */
#define B43_NPHY_LTRN_OFF B43_PHY_N(0x170) /* LTRN offset */
#define B43_NPHY_NRDATAT_WWISE20SIG B43_PHY_N(0x171) /* # data tones WWiSE 20 sig */
#define B43_NPHY_NRDATAT_WWISE40SIG B43_PHY_N(0x172) /* # data tones WWiSE 40 sig */
#define B43_NPHY_NRDATAT_TGNSYNC20SIG B43_PHY_N(0x173) /* # data tones TGNsync 20 sig */
#define B43_NPHY_NRDATAT_TGNSYNC40SIG B43_PHY_N(0x174) /* # data tones TGNsync 40 sig */
#define B43_NPHY_WWISE_CRCM0 B43_PHY_N(0x175) /* WWiSE CRC mask 0 */
#define B43_NPHY_WWISE_CRCM1 B43_PHY_N(0x176) /* WWiSE CRC mask 1 */
#define B43_NPHY_WWISE_CRCM2 B43_PHY_N(0x177) /* WWiSE CRC mask 2 */
#define B43_NPHY_WWISE_CRCM3 B43_PHY_N(0x178) /* WWiSE CRC mask 3 */
#define B43_NPHY_WWISE_CRCM4 B43_PHY_N(0x179) /* WWiSE CRC mask 4 */
#define B43_NPHY_CHANEST_CDDSH B43_PHY_N(0x17A) /* Channel estimate CDD shift */
#define B43_NPHY_HTAGC_WCNT B43_PHY_N(0x17B) /* HT ADC wait counters */
#define B43_NPHY_SQPARM B43_PHY_N(0x17C) /* SQ params */
#define B43_NPHY_MCSDUP6M B43_PHY_N(0x17D) /* MCS dup 6M */
#define B43_NPHY_NDATAT_DUP40 B43_PHY_N(0x17E) /* # data tones dup 40 */
#define B43_NPHY_DUP40_TGNSYNC_CYCD B43_PHY_N(0x17F) /* Dup40 TGNsync cycle data */
#define B43_NPHY_DUP40_GFBL B43_PHY_N(0x180) /* Dup40 GF format BL address */
#define B43_NPHY_DUP40_BL B43_PHY_N(0x181) /* Dup40 format BL address */
#define B43_NPHY_LEGDUP_FTA B43_PHY_N(0x182) /* Legacy dup frm table address */
#define B43_NPHY_PACPROC_DBG B43_PHY_N(0x183) /* Packet processing debug */
#define B43_NPHY_PIL_CYC1 B43_PHY_N(0x184) /* Pilot cycle counter 1 */
#define B43_NPHY_PIL_CYC2 B43_PHY_N(0x185) /* Pilot cycle counter 2 */
#define B43_NPHY_TXF_20CO_S0A1 B43_PHY_N(0x186) /* TX filter 20 coeff stage 0 A1 */
#define B43_NPHY_TXF_20CO_S0A2 B43_PHY_N(0x187) /* TX filter 20 coeff stage 0 A2 */
#define B43_NPHY_TXF_20CO_S1A1 B43_PHY_N(0x188) /* TX filter 20 coeff stage 1 A1 */
#define B43_NPHY_TXF_20CO_S1A2 B43_PHY_N(0x189) /* TX filter 20 coeff stage 1 A2 */
#define B43_NPHY_TXF_20CO_S2A1 B43_PHY_N(0x18A) /* TX filter 20 coeff stage 2 A1 */
#define B43_NPHY_TXF_20CO_S2A2 B43_PHY_N(0x18B) /* TX filter 20 coeff stage 2 A2 */
#define B43_NPHY_TXF_20CO_S0B1 B43_PHY_N(0x18C) /* TX filter 20 coeff stage 0 B1 */
#define B43_NPHY_TXF_20CO_S0B2 B43_PHY_N(0x18D) /* TX filter 20 coeff stage 0 B2 */
#define B43_NPHY_TXF_20CO_S0B3 B43_PHY_N(0x18E) /* TX filter 20 coeff stage 0 B3 */
#define B43_NPHY_TXF_20CO_S1B1 B43_PHY_N(0x18F) /* TX filter 20 coeff stage 1 B1 */
#define B43_NPHY_TXF_20CO_S1B2 B43_PHY_N(0x190) /* TX filter 20 coeff stage 1 B2 */
#define B43_NPHY_TXF_20CO_S1B3 B43_PHY_N(0x191) /* TX filter 20 coeff stage 1 B3 */
#define B43_NPHY_TXF_20CO_S2B1 B43_PHY_N(0x192) /* TX filter 20 coeff stage 2 B1 */
#define B43_NPHY_TXF_20CO_S2B2 B43_PHY_N(0x193) /* TX filter 20 coeff stage 2 B2 */
#define B43_NPHY_TXF_20CO_S2B3 B43_PHY_N(0x194) /* TX filter 20 coeff stage 2 B3 */
#define B43_NPHY_TXF_40CO_S0A1 B43_PHY_N(0x195) /* TX filter 40 coeff stage 0 A1 */
#define B43_NPHY_TXF_40CO_S0A2 B43_PHY_N(0x196) /* TX filter 40 coeff stage 0 A2 */
#define B43_NPHY_TXF_40CO_S1A1 B43_PHY_N(0x197) /* TX filter 40 coeff stage 1 A1 */
#define B43_NPHY_TXF_40CO_S1A2 B43_PHY_N(0x198) /* TX filter 40 coeff stage 1 A2 */
#define B43_NPHY_TXF_40CO_S2A1 B43_PHY_N(0x199) /* TX filter 40 coeff stage 2 A1 */
#define B43_NPHY_TXF_40CO_S2A2 B43_PHY_N(0x19A) /* TX filter 40 coeff stage 2 A2 */
#define B43_NPHY_TXF_40CO_S0B1 B43_PHY_N(0x19B) /* TX filter 40 coeff stage 0 B1 */
#define B43_NPHY_TXF_40CO_S0B2 B43_PHY_N(0x19C) /* TX filter 40 coeff stage 0 B2 */
#define B43_NPHY_TXF_40CO_S0B3 B43_PHY_N(0x19D) /* TX filter 40 coeff stage 0 B3 */
#define B43_NPHY_TXF_40CO_S1B1 B43_PHY_N(0x19E) /* TX filter 40 coeff stage 1 B1 */
#define B43_NPHY_TXF_40CO_S1B2 B43_PHY_N(0x19F) /* TX filter 40 coeff stage 1 B2 */
#define B43_NPHY_TXF_40CO_S1B3 B43_PHY_N(0x1A0) /* TX filter 40 coeff stage 1 B3 */
#define B43_NPHY_TXF_40CO_S2B1 B43_PHY_N(0x1A1) /* TX filter 40 coeff stage 2 B1 */
#define B43_NPHY_TXF_40CO_S2B2 B43_PHY_N(0x1A2) /* TX filter 40 coeff stage 2 B2 */
#define B43_NPHY_TXF_40CO_S2B3 B43_PHY_N(0x1A3) /* TX filter 40 coeff stage 2 B3 */
#define B43_NPHY_RSSIMC_0I_RSSI_X B43_PHY_N(0x1A4) /* RSSI multiplication coefficient 0 I RSSI X */
#define B43_NPHY_RSSIMC_0I_RSSI_Y B43_PHY_N(0x1A5) /* RSSI multiplication coefficient 0 I RSSI Y */
#define B43_NPHY_RSSIMC_0I_RSSI_Z B43_PHY_N(0x1A6) /* RSSI multiplication coefficient 0 I RSSI Z */
#define B43_NPHY_RSSIMC_0I_TBD B43_PHY_N(0x1A7) /* RSSI multiplication coefficient 0 I TBD */
#define B43_NPHY_RSSIMC_0I_PWRDET B43_PHY_N(0x1A8) /* RSSI multiplication coefficient 0 I power det */
#define B43_NPHY_RSSIMC_0I_TSSI B43_PHY_N(0x1A9) /* RSSI multiplication coefficient 0 I TSSI */
#define B43_NPHY_RSSIMC_0Q_RSSI_X B43_PHY_N(0x1AA) /* RSSI multiplication coefficient 0 Q RSSI X */
#define B43_NPHY_RSSIMC_0Q_RSSI_Y B43_PHY_N(0x1AB) /* RSSI multiplication coefficient 0 Q RSSI Y */
#define B43_NPHY_RSSIMC_0Q_RSSI_Z B43_PHY_N(0x1AC) /* RSSI multiplication coefficient 0 Q RSSI Z */
#define B43_NPHY_RSSIMC_0Q_TBD B43_PHY_N(0x1AD) /* RSSI multiplication coefficient 0 Q TBD */
#define B43_NPHY_RSSIMC_0Q_PWRDET B43_PHY_N(0x1AE) /* RSSI multiplication coefficient 0 Q power det */
#define B43_NPHY_RSSIMC_0Q_TSSI B43_PHY_N(0x1AF) /* RSSI multiplication coefficient 0 Q TSSI */
#define B43_NPHY_RSSIMC_1I_RSSI_X B43_PHY_N(0x1B0) /* RSSI multiplication coefficient 1 I RSSI X */
#define B43_NPHY_RSSIMC_1I_RSSI_Y B43_PHY_N(0x1B1) /* RSSI multiplication coefficient 1 I RSSI Y */
#define B43_NPHY_RSSIMC_1I_RSSI_Z B43_PHY_N(0x1B2) /* RSSI multiplication coefficient 1 I RSSI Z */
#define B43_NPHY_RSSIMC_1I_TBD B43_PHY_N(0x1B3) /* RSSI multiplication coefficient 1 I TBD */
#define B43_NPHY_RSSIMC_1I_PWRDET B43_PHY_N(0x1B4) /* RSSI multiplication coefficient 1 I power det */
#define B43_NPHY_RSSIMC_1I_TSSI B43_PHY_N(0x1B5) /* RSSI multiplication coefficient 1 I TSSI */
#define B43_NPHY_RSSIMC_1Q_RSSI_X B43_PHY_N(0x1B6) /* RSSI multiplication coefficient 1 Q RSSI X */
#define B43_NPHY_RSSIMC_1Q_RSSI_Y B43_PHY_N(0x1B7) /* RSSI multiplication coefficient 1 Q RSSI Y */
#define B43_NPHY_RSSIMC_1Q_RSSI_Z B43_PHY_N(0x1B8) /* RSSI multiplication coefficient 1 Q RSSI Z */
#define B43_NPHY_RSSIMC_1Q_TBD B43_PHY_N(0x1B9) /* RSSI multiplication coefficient 1 Q TBD */
#define B43_NPHY_RSSIMC_1Q_PWRDET B43_PHY_N(0x1BA) /* RSSI multiplication coefficient 1 Q power det */
#define B43_NPHY_RSSIMC_1Q_TSSI B43_PHY_N(0x1BB) /* RSSI multiplication coefficient 1 Q TSSI */
#define B43_NPHY_SAMC_WCNT B43_PHY_N(0x1BC) /* Sample collect wait counter */
#define B43_NPHY_PTHROUGH_CNT B43_PHY_N(0x1BD) /* Pass-through counter */
#define B43_NPHY_LTRN_OFF_G20L B43_PHY_N(0x1C4) /* LTRN offset gain 20L */
#define B43_NPHY_LTRN_OFF_20L B43_PHY_N(0x1C5) /* LTRN offset 20L */
#define B43_NPHY_LTRN_OFF_G20U B43_PHY_N(0x1C6) /* LTRN offset gain 20U */
#define B43_NPHY_LTRN_OFF_20U B43_PHY_N(0x1C7) /* LTRN offset 20U */
#define B43_NPHY_DSSSCCK_GAINSL B43_PHY_N(0x1C8) /* DSSS/CCK gain settle length */
#define B43_NPHY_GPIO_LOOUT B43_PHY_N(0x1C9) /* GPIO low out */
#define B43_NPHY_GPIO_HIOUT B43_PHY_N(0x1CA) /* GPIO high out */
#define B43_NPHY_CRS_CHECK B43_PHY_N(0x1CB) /* CRS check */
#define B43_NPHY_ML_LOGSS_RAT B43_PHY_N(0x1CC) /* ML/logss ratio */
#define B43_NPHY_DUPSCALE B43_PHY_N(0x1CD) /* Dup scale */
#define B43_NPHY_BW1A B43_PHY_N(0x1CE) /* BW 1A */
#define B43_NPHY_BW2 B43_PHY_N(0x1CF) /* BW 2 */
#define B43_NPHY_BW3 B43_PHY_N(0x1D0) /* BW 3 */
#define B43_NPHY_BW4 B43_PHY_N(0x1D1) /* BW 4 */
#define B43_NPHY_BW5 B43_PHY_N(0x1D2) /* BW 5 */
#define B43_NPHY_BW6 B43_PHY_N(0x1D3) /* BW 6 */
#define B43_NPHY_COALEN0 B43_PHY_N(0x1D4) /* Coarse length 0 */
#define B43_NPHY_COALEN1 B43_PHY_N(0x1D5) /* Coarse length 1 */
#define B43_NPHY_CRSTHRES_1U B43_PHY_N(0x1D6) /* CRS threshold 1 U */
#define B43_NPHY_CRSTHRES_2U B43_PHY_N(0x1D7) /* CRS threshold 2 U */
#define B43_NPHY_CRSTHRES_3U B43_PHY_N(0x1D8) /* CRS threshold 3 U */
#define B43_NPHY_CRSCTL_U B43_PHY_N(0x1D9) /* CRS control U */
#define B43_NPHY_CRSTHRES_1L B43_PHY_N(0x1DA) /* CRS threshold 1 L */
#define B43_NPHY_CRSTHRES_2L B43_PHY_N(0x1DB) /* CRS threshold 2 L */
#define B43_NPHY_CRSTHRES_3L B43_PHY_N(0x1DC) /* CRS threshold 3 L */
#define B43_NPHY_CRSCTL_L B43_PHY_N(0x1DD) /* CRS control L */
#define B43_NPHY_STRA_1U B43_PHY_N(0x1DE) /* STR address 1 U */
#define B43_NPHY_STRA_2U B43_PHY_N(0x1DF) /* STR address 2 U */
#define B43_NPHY_STRA_1L B43_PHY_N(0x1E0) /* STR address 1 L */
#define B43_NPHY_STRA_2L B43_PHY_N(0x1E1) /* STR address 2 L */
#define B43_NPHY_CRSCHECK1 B43_PHY_N(0x1E2) /* CRS check 1 */
#define B43_NPHY_CRSCHECK2 B43_PHY_N(0x1E3) /* CRS check 2 */
#define B43_NPHY_CRSCHECK3 B43_PHY_N(0x1E4) /* CRS check 3 */
#define B43_NPHY_JMPSTP0 B43_PHY_N(0x1E5) /* Jump step 0 */
#define B43_NPHY_JMPSTP1 B43_PHY_N(0x1E6) /* Jump step 1 */
#define B43_NPHY_TXPCTL_CMD B43_PHY_N(0x1E7) /* TX power control command */
#define B43_NPHY_TXPCTL_CMD_INIT 0x007F /* Init */
#define B43_NPHY_TXPCTL_CMD_INIT_SHIFT 0
#define B43_NPHY_TXPCTL_CMD_COEFF 0x2000 /* Power control coefficients */
#define B43_NPHY_TXPCTL_CMD_HWPCTLEN 0x4000 /* Hardware TX power control enable */
#define B43_NPHY_TXPCTL_CMD_PCTLEN 0x8000 /* TX power control enable */
#define B43_NPHY_TXPCTL_N B43_PHY_N(0x1E8) /* TX power control N num */
#define B43_NPHY_TXPCTL_N_TSSID 0x00FF /* N TSSI delay */
#define B43_NPHY_TXPCTL_N_TSSID_SHIFT 0
#define B43_NPHY_TXPCTL_N_NPTIL2 0x0700 /* N PT integer log2 */
#define B43_NPHY_TXPCTL_N_NPTIL2_SHIFT 8
#define B43_NPHY_TXPCTL_ITSSI B43_PHY_N(0x1E9) /* TX power control idle TSSI */
#define B43_NPHY_TXPCTL_ITSSI_0 0x003F /* Idle TSSI 0 */
#define B43_NPHY_TXPCTL_ITSSI_0_SHIFT 0
#define B43_NPHY_TXPCTL_ITSSI_1 0x3F00 /* Idle TSSI 1 */
#define B43_NPHY_TXPCTL_ITSSI_1_SHIFT 8
#define B43_NPHY_TXPCTL_ITSSI_BINF 0x8000 /* Raw TSSI offset bin format */
#define B43_NPHY_TXPCTL_TPWR B43_PHY_N(0x1EA) /* TX power control target power */
#define B43_NPHY_TXPCTL_TPWR_0 0x00FF /* Power 0 */
#define B43_NPHY_TXPCTL_TPWR_0_SHIFT 0
#define B43_NPHY_TXPCTL_TPWR_1 0xFF00 /* Power 1 */
#define B43_NPHY_TXPCTL_TPWR_1_SHIFT 8
#define B43_NPHY_TXPCTL_BIDX B43_PHY_N(0x1EB) /* TX power control base index */
#define B43_NPHY_TXPCTL_BIDX_0 0x007F /* uC base index 0 */
#define B43_NPHY_TXPCTL_BIDX_0_SHIFT 0
#define B43_NPHY_TXPCTL_BIDX_1 0x7F00 /* uC base index 1 */
#define B43_NPHY_TXPCTL_BIDX_1_SHIFT 8
#define B43_NPHY_TXPCTL_BIDX_LOAD 0x8000 /* Load base index */
#define B43_NPHY_TXPCTL_PIDX B43_PHY_N(0x1EC) /* TX power control power index */
#define B43_NPHY_TXPCTL_PIDX_0 0x007F /* uC power index 0 */
#define B43_NPHY_TXPCTL_PIDX_0_SHIFT 0
#define B43_NPHY_TXPCTL_PIDX_1 0x7F00 /* uC power index 1 */
#define B43_NPHY_TXPCTL_PIDX_1_SHIFT 8
#define B43_NPHY_C1_TXPCTL_STAT B43_PHY_N(0x1ED) /* Core 1 TX power control status */
#define B43_NPHY_C2_TXPCTL_STAT B43_PHY_N(0x1EE) /* Core 2 TX power control status */
#define B43_NPHY_TXPCTL_STAT_EST 0x00FF /* Estimated power */
#define B43_NPHY_TXPCTL_STAT_EST_SHIFT 0
#define B43_NPHY_TXPCTL_STAT_BIDX 0x7F00 /* Base index */
#define B43_NPHY_TXPCTL_STAT_BIDX_SHIFT 8
#define B43_NPHY_TXPCTL_STAT_ESTVALID 0x8000 /* Estimated power valid */
#define B43_NPHY_SMALLSGS_LEN B43_PHY_N(0x1EF) /* Small sig gain settle length */
#define B43_NPHY_PHYSTAT_GAIN0 B43_PHY_N(0x1F0) /* PHY stats gain info 0 */
#define B43_NPHY_PHYSTAT_GAIN1 B43_PHY_N(0x1F1) /* PHY stats gain info 1 */
#define B43_NPHY_PHYSTAT_FREQEST B43_PHY_N(0x1F2) /* PHY stats frequency estimate */
#define B43_NPHY_PHYSTAT_ADVRET B43_PHY_N(0x1F3) /* PHY stats ADV retard */
#define B43_NPHY_PHYLB_MODE B43_PHY_N(0x1F4) /* PHY loopback mode */
#define B43_NPHY_TONE_MIDX20_1 B43_PHY_N(0x1F5) /* Tone map index 20/1 */
#define B43_NPHY_TONE_MIDX20_2 B43_PHY_N(0x1F6) /* Tone map index 20/2 */
#define B43_NPHY_TONE_MIDX20_3 B43_PHY_N(0x1F7) /* Tone map index 20/3 */
#define B43_NPHY_TONE_MIDX40_1 B43_PHY_N(0x1F8) /* Tone map index 40/1 */
#define B43_NPHY_TONE_MIDX40_2 B43_PHY_N(0x1F9) /* Tone map index 40/2 */
#define B43_NPHY_TONE_MIDX40_3 B43_PHY_N(0x1FA) /* Tone map index 40/3 */
#define B43_NPHY_TONE_MIDX40_4 B43_PHY_N(0x1FB) /* Tone map index 40/4 */
#define B43_NPHY_PILTONE_MIDX1 B43_PHY_N(0x1FC) /* Pilot tone map index 1 */
#define B43_NPHY_PILTONE_MIDX2 B43_PHY_N(0x1FD) /* Pilot tone map index 2 */
#define B43_NPHY_PILTONE_MIDX3 B43_PHY_N(0x1FE) /* Pilot tone map index 3 */
#define B43_NPHY_TXRIFS_FRDEL B43_PHY_N(0x1FF) /* TX RIFS frame delay */
#define B43_NPHY_AFESEQ_RX2TX_PUD_40M B43_PHY_N(0x200) /* AFE seq rx2tx power up/down delay 40M */
#define B43_NPHY_AFESEQ_TX2RX_PUD_40M B43_PHY_N(0x201) /* AFE seq tx2rx power up/down delay 40M */
#define B43_NPHY_AFESEQ_RX2TX_PUD_20M B43_PHY_N(0x202) /* AFE seq rx2tx power up/down delay 20M */
#define B43_NPHY_AFESEQ_TX2RX_PUD_20M B43_PHY_N(0x203) /* AFE seq tx2rx power up/down delay 20M */
#define B43_NPHY_RX_SIGCTL B43_PHY_N(0x204) /* RX signal control */
#define B43_NPHY_RXPIL_CYCNT0 B43_PHY_N(0x205) /* RX pilot cycle counter 0 */
#define B43_NPHY_RXPIL_CYCNT1 B43_PHY_N(0x206) /* RX pilot cycle counter 1 */
#define B43_NPHY_RXPIL_CYCNT2 B43_PHY_N(0x207) /* RX pilot cycle counter 2 */
#define B43_NPHY_AFESEQ_RX2TX_PUD_10M B43_PHY_N(0x208) /* AFE seq rx2tx power up/down delay 10M */
#define B43_NPHY_AFESEQ_TX2RX_PUD_10M B43_PHY_N(0x209) /* AFE seq tx2rx power up/down delay 10M */
#define B43_NPHY_DSSSCCK_CRSEXTL B43_PHY_N(0x20A) /* DSSS/CCK CRS extension length */
#define B43_NPHY_ML_LOGSS_RATSLOPE B43_PHY_N(0x20B) /* ML/logss ratio slope */
#define B43_NPHY_RIFS_SRCTL B43_PHY_N(0x20C) /* RIFS search timeout length */
#define B43_NPHY_TXREALFD B43_PHY_N(0x20D) /* TX real frame delay */
#define B43_NPHY_HPANT_SWTHRES B43_PHY_N(0x20E) /* High power antenna switch threshold */
#define B43_NPHY_EDCRS_ASSTHRES0 B43_PHY_N(0x210) /* ED CRS assert threshold 0 */
#define B43_NPHY_EDCRS_ASSTHRES1 B43_PHY_N(0x211) /* ED CRS assert threshold 1 */
#define B43_NPHY_EDCRS_DEASSTHRES0 B43_PHY_N(0x212) /* ED CRS deassert threshold 0 */
#define B43_NPHY_EDCRS_DEASSTHRES1 B43_PHY_N(0x213) /* ED CRS deassert threshold 1 */
#define B43_NPHY_STR_WTIME20U B43_PHY_N(0x214) /* STR wait time 20U */
#define B43_NPHY_STR_WTIME20L B43_PHY_N(0x215) /* STR wait time 20L */
#define B43_NPHY_TONE_MIDX657M B43_PHY_N(0x216) /* Tone map index 657M */
#define B43_NPHY_HTSIGTONES B43_PHY_N(0x217) /* HT signal tones */
#define B43_NPHY_RSSI1 B43_PHY_N(0x219) /* RSSI value 1 */
#define B43_NPHY_RSSI2 B43_PHY_N(0x21A) /* RSSI value 2 */
#define B43_NPHY_CHAN_ESTHANG B43_PHY_N(0x21D) /* Channel estimate hang */
#define B43_NPHY_FINERX2_CGC B43_PHY_N(0x221) /* Fine RX 2 clock gate control */
#define B43_NPHY_FINERX2_CGC_DECGC 0x0008 /* Decode gated clocks */
#define B43_NPHY_TXPCTL_INIT B43_PHY_N(0x222) /* TX power controll init */
#define B43_NPHY_TXPCTL_INIT_PIDXI1 0x00FF /* Power index init 1 */
#define B43_NPHY_TXPCTL_INIT_PIDXI1_SHIFT 0
struct b43_wldev;
int b43_phy_initn(struct b43_wldev *dev);
#endif /* B43_NPHY_H_ */
drivers/net/wireless/b43/phy.c
View file @ 424047e6
......@@ -31,6 +31,7 @@
#include "b43.h"
#include "phy.h"
#include "nphy.h"
#include "main.h"
#include "tables.h"
#include "lo.h"
......@@ -1974,41 +1975,44 @@ int b43_phy_init_tssi2dbm_table(struct b43_wldev *dev)
int b43_phy_init(struct b43_wldev *dev)
{
struct b43_phy *phy = &dev->phy;
int err = -ENODEV;
bool unsupported = 0;
int err = 0;
switch (phy->type) {
case B43_PHYTYPE_A:
if (phy->rev == 2 || phy->rev == 3) {
if (phy->rev == 2 || phy->rev == 3)
b43_phy_inita(dev);
err = 0;
}
else
unsupported = 1;
break;
case B43_PHYTYPE_B:
switch (phy->rev) {
case 2:
b43_phy_initb2(dev);
err = 0;
break;
case 4:
b43_phy_initb4(dev);
err = 0;
break;
case 5:
b43_phy_initb5(dev);
err = 0;
break;
case 6:
b43_phy_initb6(dev);
err = 0;
break;
default:
unsupported = 1;
}
break;
case B43_PHYTYPE_G:
b43_phy_initg(dev);
err = 0;
break;
case B43_PHYTYPE_N:
err = b43_phy_initn(dev);
break;
default:
unsupported = 1;
}
if (err)
if (unsupported)
b43err(dev->wl, "Unknown PHYTYPE found\n");
return err;
......
drivers/net/wireless/b43/phy.h
View file @ 424047e6
......@@ -9,11 +9,14 @@ struct b43_phy;
/*** PHY Registers ***/
/* Routing */
#define B43_PHYROUTE_OFDM_GPHY 0x400
#define B43_PHYROUTE_EXT_GPHY 0x800
#define B43_PHYROUTE_OFDM_GPHY 0x0400 /* OFDM register routing for G-PHYs */
#define B43_PHYROUTE_EXT_GPHY 0x0800 /* Extended G-PHY registers */
#define B43_PHYROUTE_N_BMODE 0x3000 /* N-PHY BMODE registers */
/* Base registers. */
#define B43_PHY_BASE(reg) (reg)
/* N-PHY registers. */
#define B43_PHY_N(reg) (reg)
/* OFDM (A) registers of a G-PHY */
#define B43_PHY_OFDM(reg) ((reg) | B43_PHYROUTE_OFDM_GPHY)
/* Extended G-PHY registers */
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7