block/swim3: Fix regression on PowerBook G3

As of v4.20, the swim3 driver crashes when loaded on a PowerBook G3
(Wallstreet).

MacIO PCI driver attached to Gatwick chipset
MacIO PCI driver attached to Heathrow chipset
swim3 0.00015000:floppy: [fd0] SWIM3 floppy controller in media bay
0.00013020:ch-a: ttyS0 at MMIO 0xf3013020 (irq = 16, base_baud = 230400) is a Z85c30 ESCC - Serial port
0.00013000:ch-b: ttyS1 at MMIO 0xf3013000 (irq = 17, base_baud = 230400) is a Z85c30 ESCC - Infrared port
macio: fixed media-bay irq on gatwick
macio: fixed left floppy irqs
swim3 1.00015000:floppy: [fd1] Couldn't request interrupt
Unable to handle kernel paging request for data at address 0x00000024
Faulting instruction address: 0xc02652f8
Oops: Kernel access of bad area, sig: 11 [#1]
BE SMP NR_CPUS=2 PowerMac
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.20.0 #2
NIP:  c02652f8 LR: c026915c CTR: c0276d1c
REGS: df43ba10 TRAP: 0300   Not tainted  (4.20.0)
MSR:  00009032 <EE,ME,IR,DR,RI>  CR: 28228288  XER: 00000100
DAR: 00000024 DSISR: 40000000
GPR00: c026915c df43bac0 df439060 c0731524 df494700 00000000 c06e1c08 00000001
GPR08: 00000001 00000000 df5ff220 00001032 28228282 00000000 c0004ca4 00000000
GPR16: 00000000 00000000 00000000 c073144c dfffe064 c0731524 00000120 c0586108
GPR24: c073132c c073143c c073143c 00000000 c0731524 df67cd70 df494700 00000001
NIP [c02652f8] blk_mq_free_rqs+0x28/0xf8
LR [c026915c] blk_mq_sched_tags_teardown+0x58/0x84
Call Trace:
[df43bac0] [c0045f50] flush_workqueue_prep_pwqs+0x178/0x1c4 (unreliable)
[df43bae0] [c026915c] blk_mq_sched_tags_teardown+0x58/0x84
[df43bb00] [c02697f0] blk_mq_exit_sched+0x9c/0xb8
[df43bb20] [c0252794] elevator_exit+0x84/0xa4
[df43bb40] [c0256538] blk_exit_queue+0x30/0x50
[df43bb50] [c0256640] blk_cleanup_queue+0xe8/0x184
[df43bb70] [c034732c] swim3_attach+0x330/0x5f0
[df43bbb0] [c034fb24] macio_device_probe+0x58/0xec
[df43bbd0] [c032ba88] really_probe+0x1e4/0x2f4
[df43bc00] [c032bd28] driver_probe_device+0x64/0x204
[df43bc20] [c0329ac4] bus_for_each_drv+0x60/0xac
[df43bc50] [c032b824] __device_attach+0xe8/0x160
[df43bc80] [c032ab38] bus_probe_device+0xa0/0xbc
[df43bca0] [c0327338] device_add+0x3d8/0x630
[df43bcf0] [c0350848] macio_add_one_device+0x444/0x48c
[df43bd50] [c03509f8] macio_pci_add_devices+0x168/0x1bc
[df43bd90] [c03500ec] macio_pci_probe+0xc0/0x10c
[df43bda0] [c02ad884] pci_device_probe+0xd4/0x184
[df43bdd0] [c032ba88] really_probe+0x1e4/0x2f4
[df43be00] [c032bd28] driver_probe_device+0x64/0x204
[df43be20] [c032bfcc] __driver_attach+0x104/0x108
[df43be40] [c0329a00] bus_for_each_dev+0x64/0xb4
[df43be70] [c032add8] bus_add_driver+0x154/0x238
[df43be90] [c032ca24] driver_register+0x84/0x148
[df43bea0] [c0004aa0] do_one_initcall+0x40/0x188
[df43bf00] [c0690100] kernel_init_freeable+0x138/0x1d4
[df43bf30] [c0004cbc] kernel_init+0x18/0x10c
[df43bf40] [c00121e4] ret_from_kernel_thread+0x14/0x1c
Instruction dump:
5484d97e 4bfff4f4 9421ffe0 7c0802a6 bf410008 7c9e2378 90010024 8124005c
2f890000 419e0078 81230004 7c7c1b78 <81290024> 2f890000 419e0064 81440000
---[ end trace 12025ab921a9784c ]---

Reverting commit 8ccb8cb1 ("swim3: convert to blk-mq") resolves the
problem.

That commit added a struct blk_mq_tag_set to struct floppy_state and
initialized it with a blk_mq_init_sq_queue() call. Unfortunately, there
is a memset() in swim3_add_device() that subsequently clears the
floppy_state struct. That means fs->tag_set->ops is a NULL pointer, and
it gets dereferenced by blk_mq_free_rqs() which gets called in the
request_irq() error path. Move the memset() to fix this bug.

BTW, the request_irq() failure for the left mediabay floppy (fd1) is not
a regression. I don't know why it happens. The right media bay floppy
(fd0) works fine however.
Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Fixes: 8ccb8cb1 ("swim3: convert to blk-mq")
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

drivers/block/swim3.c

@@ -1091,8 +1091,6 @@ static int swim3_add_device(struct macio_dev *mdev, int index)
 	struct floppy_state *fs = &floppy_states[index];
 	int rc = -EBUSY;
 
-	/* Do this first for message macros */
-	memset(fs, 0, sizeof(*fs));
 	fs->mdev = mdev;
 	fs->index = index;
 
@@ -1191,14 +1189,15 @@ static int swim3_attach(struct macio_dev *mdev,
 			return rc;
 	}
 
-	fs = &floppy_states[floppy_count];
-
 	disk = alloc_disk(1);
 	if (disk == NULL) {
 		rc = -ENOMEM;
 		goto out_unregister;
 	}
 
+	fs = &floppy_states[floppy_count];
+	memset(fs, 0, sizeof(*fs));
+
 	disk->queue = blk_mq_init_sq_queue(&fs->tag_set, &swim3_mq_ops, 2,
 						BLK_MQ_F_SHOULD_MERGE);
 	if (IS_ERR(disk->queue)) {