[POWERPC] Consolidate feature fixup code

There are currently two versions of the functions for applying the
feature fixups, one for CPU features and one for firmware features. In
addition, they are both in assembly and with separate implementations
for 32 and 64 bits. identify_cpu() is also implemented in assembly and
separately for 32 and 64 bits.

This patch replaces them with a pair of C functions. The call sites are
slightly moved on ppc64 as well to be called from C instead of from
assembly, though it's a very small change, and thus shouldn't cause any
problem.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

arch/powerpc/kernel/cputable.c

@@ -18,6 +18,7 @@
 
 #include <asm/oprofile_impl.h>
 #include <asm/cputable.h>
+#include <asm/prom.h>		/* for PTRRELOC on ARCH=ppc */
 
 struct cpu_spec* cur_cpu_spec = NULL;
 EXPORT_SYMBOL(cur_cpu_spec);
@@ -73,7 +74,7 @@ extern void __restore_cpu_ppc970(void);
 #define PPC_FEATURE_SPE_COMP	0
 #endif
 
-struct cpu_spec	cpu_specs[] = {
+static struct cpu_spec cpu_specs[] = {
 #ifdef CONFIG_PPC64
 	{	/* Power3 */
 		.pvr_mask		= 0xffff0000,
@@ -1167,3 +1168,72 @@ struct cpu_spec	cpu_specs[] = {
 #endif /* !CLASSIC_PPC */
 #endif /* CONFIG_PPC32 */
 };
+
+struct cpu_spec *identify_cpu(unsigned long offset)
+{
+	struct cpu_spec *s = cpu_specs;
+	struct cpu_spec **cur = &cur_cpu_spec;
+	unsigned int pvr = mfspr(SPRN_PVR);
+	int i;
+
+	s = PTRRELOC(s);
+	cur = PTRRELOC(cur);
+
+	if (*cur != NULL)
+		return PTRRELOC(*cur);
+
+	for (i = 0; i < ARRAY_SIZE(cpu_specs); i++,s++)
+		if ((pvr & s->pvr_mask) == s->pvr_value) {
+			*cur = cpu_specs + i;
+#ifdef CONFIG_PPC64
+			/* ppc64 expects identify_cpu to also call setup_cpu
+			 * for that processor. I will consolidate that at a
+			 * later time, for now, just use our friend #ifdef.
+			 * we also don't need to PTRRELOC the function pointer
+			 * on ppc64 as we are running at 0 in real mode.
+			 */
+			if (s->cpu_setup) {
+				s->cpu_setup(offset, s);
+			}
+#endif /* CONFIG_PPC64 */
+			return s;
+		}
+	BUG();
+	return NULL;
+}
+
+void do_feature_fixups(unsigned long offset, unsigned long value,
+		       void *fixup_start, void *fixup_end)
+{
+	struct fixup_entry {
+		unsigned long	mask;
+		unsigned long	value;
+		unsigned int	*start;
+		unsigned int	*end;
+	} *fcur, *fend;
+
+	fcur = fixup_start;
+	fend = fixup_end;
+
+	for (; fcur < fend; fcur++) {
+		unsigned int *pstart, *pend, *p;
+
+		if ((value & fcur->mask) == fcur->value)
+			continue;
+
+		/* These PTRRELOCs will disappear once the new scheme for
+		 * modules and vdso is implemented
+		 */
+		pstart = PTRRELOC(fcur->start);
+		pend = PTRRELOC(fcur->end);
+
+		for (p = pstart; p < pend; p++) {
+			*p = 0x60000000u;
+			asm volatile ("dcbst 0, %0" : : "r" (p));
+		}
+		asm volatile ("sync" : : : "memory");
+		for (p = pstart; p < pend; p++)
+			asm volatile ("icbi 0,%0" : : "r" (p));
+		asm volatile ("sync; isync" : : : "memory");
+	}
+}

arch/powerpc/kernel/head_64.S

@@ -1580,11 +1580,6 @@ _STATIC(__start_initialization_iSeries)
 	li	r0,0
 	stdu	r0,-STACK_FRAME_OVERHEAD(r1)
 
-	LOAD_REG_IMMEDIATE(r3,cpu_specs)
-	LOAD_REG_IMMEDIATE(r4,cur_cpu_spec)
-	li	r5,0
-	bl	.identify_cpu
-
 	LOAD_REG_IMMEDIATE(r2,__toc_start)
 	addi	r2,r2,0x4000
 	addi	r2,r2,0x4000
@@ -1964,13 +1959,6 @@ _STATIC(start_here_multiplatform)
 	addi	r2,r2,0x4000
 	add	r2,r2,r26
 
-	LOAD_REG_IMMEDIATE(r3, cpu_specs)
-	add	r3,r3,r26
-	LOAD_REG_IMMEDIATE(r4,cur_cpu_spec)
-	add	r4,r4,r26
-	mr	r5,r26
-	bl	.identify_cpu
-
 	/* Do very early kernel initializations, including initial hash table,
 	 * stab and slb setup before we turn on relocation.	*/
 
@@ -2000,13 +1988,6 @@ _STATIC(start_here_common)
 	li	r0,0
 	stdu	r0,-STACK_FRAME_OVERHEAD(r1)
 
-	/* Apply the CPUs-specific fixups (nop out sections not relevant
-	 * to this CPU
-	 */
-	li	r3,0
-	bl	.do_cpu_ftr_fixups
-	bl	.do_fw_ftr_fixups
-
 	/* ptr to current */
 	LOAD_REG_IMMEDIATE(r4, init_task)
 	std	r4,PACACURRENT(r13)

arch/powerpc/kernel/misc_32.S

@@ -101,80 +101,6 @@ _GLOBAL(reloc_got2)
 	mtlr	r11
 	blr
 
-/*
- * identify_cpu,
- * called with r3 = data offset and r4 = CPU number
- * doesn't change r3
- */
-_GLOBAL(identify_cpu)
-	addis	r8,r3,cpu_specs@ha
-	addi	r8,r8,cpu_specs@l
-	mfpvr	r7
-1:
-	lwz	r5,CPU_SPEC_PVR_MASK(r8)
-	and	r5,r5,r7
-	lwz	r6,CPU_SPEC_PVR_VALUE(r8)
-	cmplw	0,r6,r5
-	beq	1f
-	addi	r8,r8,CPU_SPEC_ENTRY_SIZE
-	b	1b
-1:
-	addis	r6,r3,cur_cpu_spec@ha
-	addi	r6,r6,cur_cpu_spec@l
-	sub	r8,r8,r3
-	stw	r8,0(r6)
-	blr
-
-/*
- * do_cpu_ftr_fixups - goes through the list of CPU feature fixups
- * and writes nop's over sections of code that don't apply for this cpu.
- * r3 = data offset (not changed)
- */
-_GLOBAL(do_cpu_ftr_fixups)
-	/* Get CPU 0 features */
-	addis	r6,r3,cur_cpu_spec@ha
-	addi	r6,r6,cur_cpu_spec@l
-	lwz	r4,0(r6)
-	add	r4,r4,r3
-	lwz	r4,CPU_SPEC_FEATURES(r4)
-
-	/* Get the fixup table */
-	addis	r6,r3,__start___ftr_fixup@ha
-	addi	r6,r6,__start___ftr_fixup@l
-	addis	r7,r3,__stop___ftr_fixup@ha
-	addi	r7,r7,__stop___ftr_fixup@l
-
-	/* Do the fixup */
-1:	cmplw	0,r6,r7
-	bgelr
-	addi	r6,r6,16
-	lwz	r8,-16(r6)	/* mask */
-	and	r8,r8,r4
-	lwz	r9,-12(r6)	/* value */
-	cmplw	0,r8,r9
-	beq	1b
-	lwz	r8,-8(r6)	/* section begin */
-	lwz	r9,-4(r6)	/* section end */
-	subf.	r9,r8,r9
-	beq	1b
-	/* write nops over the section of code */
-	/* todo: if large section, add a branch at the start of it */
-	srwi	r9,r9,2
-	mtctr	r9
-	add	r8,r8,r3
-	lis	r0,0x60000000@h	/* nop */
-3:	stw	r0,0(r8)
-	andi.	r10,r4,CPU_FTR_SPLIT_ID_CACHE@l
-	beq	2f
-	dcbst	0,r8		/* suboptimal, but simpler */
-	sync
-	icbi	0,r8
-2:	addi	r8,r8,4
-	bdnz	3b
-	sync			/* additional sync needed on g4 */
-	isync
-	b	1b
-
 /*
  * call_setup_cpu - call the setup_cpu function for this cpu
  * r3 = data offset, r24 = cpu number

arch/powerpc/kernel/misc_64.S

@@ -246,130 +246,6 @@ _GLOBAL(__flush_dcache_icache)
 	isync
 	blr
 
-/*
- * identify_cpu and calls setup_cpu
- * In:	r3 = base of the cpu_specs array
- *	r4 = address of cur_cpu_spec
- *	r5 = relocation offset
- */
-_GLOBAL(identify_cpu)
-	mfpvr	r7
-1:
-	lwz	r8,CPU_SPEC_PVR_MASK(r3)
-	and	r8,r8,r7
-	lwz	r9,CPU_SPEC_PVR_VALUE(r3)
-	cmplw	0,r9,r8
-	beq	1f
-	addi	r3,r3,CPU_SPEC_ENTRY_SIZE
-	b	1b
-1:
-	sub	r0,r3,r5
-	std	r0,0(r4)
-	ld	r4,CPU_SPEC_SETUP(r3)
-	cmpdi	0,r4,0
-	add	r4,r4,r5
-	beqlr
-	ld	r4,0(r4)
-	add	r4,r4,r5
-	mtctr	r4
-	/* Calling convention for cpu setup is r3=offset, r4=cur_cpu_spec */
-	mr	r4,r3
-	mr	r3,r5
-	bctr
-
-/*
- * do_cpu_ftr_fixups - goes through the list of CPU feature fixups
- * and writes nop's over sections of code that don't apply for this cpu.
- * r3 = data offset (not changed)
- */
-_GLOBAL(do_cpu_ftr_fixups)
-	/* Get CPU 0 features */
-	LOAD_REG_IMMEDIATE(r6,cur_cpu_spec)
-	sub	r6,r6,r3
-	ld	r4,0(r6)
-	sub	r4,r4,r3
-	ld	r4,CPU_SPEC_FEATURES(r4)
-	/* Get the fixup table */
-	LOAD_REG_IMMEDIATE(r6,__start___ftr_fixup)
-	sub	r6,r6,r3
-	LOAD_REG_IMMEDIATE(r7,__stop___ftr_fixup)
-	sub	r7,r7,r3
-	/* Do the fixup */
-1:	cmpld	r6,r7
-	bgelr
-	addi	r6,r6,32
-	ld	r8,-32(r6)	/* mask */
-	and	r8,r8,r4
-	ld	r9,-24(r6)	/* value */
-	cmpld	r8,r9
-	beq	1b
-	ld	r8,-16(r6)	/* section begin */
-	ld	r9,-8(r6)	/* section end */
-	subf.	r9,r8,r9
-	beq	1b
-	/* write nops over the section of code */
-	/* todo: if large section, add a branch at the start of it */
-	srwi	r9,r9,2
-	mtctr	r9
-	sub	r8,r8,r3
-	lis	r0,0x60000000@h	/* nop */
-3:	stw	r0,0(r8)
-	andi.	r10,r4,CPU_FTR_SPLIT_ID_CACHE@l
-	beq	2f
-	dcbst	0,r8		/* suboptimal, but simpler */
-	sync
-	icbi	0,r8
-2:	addi	r8,r8,4
-	bdnz	3b
-	sync			/* additional sync needed on g4 */
-	isync
-	b	1b
-
-/*
- * do_fw_ftr_fixups - goes through the list of firmware feature fixups
- * and writes nop's over sections of code that don't apply for this firmware.
- * r3 = data offset (not changed)
- */
-_GLOBAL(do_fw_ftr_fixups)
-	/* Get firmware features */
-	LOAD_REG_IMMEDIATE(r6,powerpc_firmware_features)
-	sub	r6,r6,r3
-	ld	r4,0(r6)
-	/* Get the fixup table */
-	LOAD_REG_IMMEDIATE(r6,__start___fw_ftr_fixup)
-	sub	r6,r6,r3
-	LOAD_REG_IMMEDIATE(r7,__stop___fw_ftr_fixup)
-	sub	r7,r7,r3
-	/* Do the fixup */
-1:	cmpld	r6,r7
-	bgelr
-	addi	r6,r6,32
-	ld	r8,-32(r6)	/* mask */
-	and	r8,r8,r4
-	ld	r9,-24(r6)	/* value */
-	cmpld	r8,r9
-	beq	1b
-	ld	r8,-16(r6)	/* section begin */
-	ld	r9,-8(r6)	/* section end */
-	subf.	r9,r8,r9
-	beq	1b
-	/* write nops over the section of code */
-	/* todo: if large section, add a branch at the start of it */
-	srwi	r9,r9,2
-	mtctr	r9
-	sub	r8,r8,r3
-	lis	r0,0x60000000@h	/* nop */
-3:	stw	r0,0(r8)
-BEGIN_FTR_SECTION
-	dcbst	0,r8		/* suboptimal, but simpler */
-	sync
-	icbi	0,r8
-END_FTR_SECTION_IFSET(CPU_FTR_SPLIT_ID_CACHE)
-	addi	r8,r8,4
-	bdnz	3b
-	sync			/* additional sync needed on g4 */
-	isync
-	b	1b
 
 #if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE)
 /*

arch/powerpc/kernel/setup_32.c

@@ -91,6 +91,7 @@ int ucache_bsize;
 unsigned long __init early_init(unsigned long dt_ptr)
 {
 	unsigned long offset = reloc_offset();
+	struct cpu_spec *spec;
 
 	/* First zero the BSS -- use memset_io, some platforms don't have
 	 * caches on yet */
@@ -100,8 +101,11 @@ unsigned long __init early_init(unsigned long dt_ptr)
 	 * Identify the CPU type and fix up code sections
 	 * that depend on which cpu we have.
 	 */
-	identify_cpu(offset, 0);
-	do_cpu_ftr_fixups(offset);
+	spec = identify_cpu(offset);
+
+	do_feature_fixups(offset, spec->cpu_features,
+			  PTRRELOC(&__start___ftr_fixup),
+			  PTRRELOC(&__stop___ftr_fixup));
 
 	return KERNELBASE + offset;
 }

arch/powerpc/kernel/setup_64.c

@@ -170,6 +170,9 @@ void __init setup_paca(int cpu)
 
 void __init early_setup(unsigned long dt_ptr)
 {
+	/* Identify CPU type */
+	identify_cpu(0);
+
 	/* Assume we're on cpu 0 for now. Don't write to the paca yet! */
 	setup_paca(0);
 
@@ -348,6 +351,14 @@ void __init setup_system(void)
 {
 	DBG(" -> setup_system()\n");
 
+	/* Apply the CPUs-specific and firmware specific fixups to kernel
+	 * text (nop out sections not relevant to this CPU or this firmware)
+	 */
+	do_feature_fixups(0, cur_cpu_spec->cpu_features,
+			  &__start___ftr_fixup, &__stop___ftr_fixup);
+	do_feature_fixups(0, powerpc_firmware_features,
+			  &__start___fw_ftr_fixup, &__stop___fw_ftr_fixup);
+
 	/*
 	 * Unflatten the device-tree passed by prom_init or kexec
 	 */

arch/powerpc/platforms/iseries/setup.c

@@ -694,6 +694,11 @@ void * __init iSeries_early_setup(void)
 {
 	unsigned long phys_mem_size;
 
+	/* Identify CPU type. This is done again by the common code later
+	 * on but calling this function multiple times is fine.
+	 */
+	identify_cpu(0);
+
 	powerpc_firmware_features |= FW_FEATURE_ISERIES;
 	powerpc_firmware_features |= FW_FEATURE_LPAR;
 

arch/ppc/kernel/misc.S

@@ -109,80 +109,6 @@ _GLOBAL(reloc_got2)
 	mtlr	r11
 	blr
 
-/*
- * identify_cpu,
- * called with r3 = data offset and r4 = CPU number
- * doesn't change r3
- */
-_GLOBAL(identify_cpu)
-	addis	r8,r3,cpu_specs@ha
-	addi	r8,r8,cpu_specs@l
-	mfpvr	r7
-1:
-	lwz	r5,CPU_SPEC_PVR_MASK(r8)
-	and	r5,r5,r7
-	lwz	r6,CPU_SPEC_PVR_VALUE(r8)
-	cmplw	0,r6,r5
-	beq	1f
-	addi	r8,r8,CPU_SPEC_ENTRY_SIZE
-	b	1b
-1:
-	addis	r6,r3,cur_cpu_spec@ha
-	addi	r6,r6,cur_cpu_spec@l
-	sub	r8,r8,r3
-	stw	r8,0(r6)
-	blr
-
-/*
- * do_cpu_ftr_fixups - goes through the list of CPU feature fixups
- * and writes nop's over sections of code that don't apply for this cpu.
- * r3 = data offset (not changed)
- */
-_GLOBAL(do_cpu_ftr_fixups)
-	/* Get CPU 0 features */
-	addis	r6,r3,cur_cpu_spec@ha
-	addi	r6,r6,cur_cpu_spec@l
-	lwz	r4,0(r6)
-	add	r4,r4,r3
-	lwz	r4,CPU_SPEC_FEATURES(r4)
-
-	/* Get the fixup table */
-	addis	r6,r3,__start___ftr_fixup@ha
-	addi	r6,r6,__start___ftr_fixup@l
-	addis	r7,r3,__stop___ftr_fixup@ha
-	addi	r7,r7,__stop___ftr_fixup@l
-
-	/* Do the fixup */
-1:	cmplw	0,r6,r7
-	bgelr
-	addi	r6,r6,16
-	lwz	r8,-16(r6)	/* mask */
-	and	r8,r8,r4
-	lwz	r9,-12(r6)	/* value */
-	cmplw	0,r8,r9
-	beq	1b
-	lwz	r8,-8(r6)	/* section begin */
-	lwz	r9,-4(r6)	/* section end */
-	subf.	r9,r8,r9
-	beq	1b
-	/* write nops over the section of code */
-	/* todo: if large section, add a branch at the start of it */
-	srwi	r9,r9,2
-	mtctr	r9
-	add	r8,r8,r3
-	lis	r0,0x60000000@h	/* nop */
-3:	stw	r0,0(r8)
-	andi.	r10,r4,CPU_FTR_SPLIT_ID_CACHE@l
-	beq	2f
-	dcbst	0,r8		/* suboptimal, but simpler */
-	sync
-	icbi	0,r8
-2:	addi	r8,r8,4
-	bdnz	3b
-	sync			/* additional sync needed on g4 */
-	isync
-	b	1b
-
 /*
  * call_setup_cpu - call the setup_cpu function for this cpu
  * r3 = data offset, r24 = cpu number

arch/ppc/kernel/setup.c

@@ -38,6 +38,7 @@
 #include <asm/nvram.h>
 #include <asm/xmon.h>
 #include <asm/ocp.h>
+#include <asm/prom.h>
 
 #define USES_PPC_SYS (defined(CONFIG_85xx) || defined(CONFIG_83xx) || \
 		      defined(CONFIG_MPC10X_BRIDGE) || defined(CONFIG_8260) || \
@@ -53,8 +54,6 @@
 
 extern void platform_init(unsigned long r3, unsigned long r4,
 		unsigned long r5, unsigned long r6, unsigned long r7);
-extern void identify_cpu(unsigned long offset, unsigned long cpu);
-extern void do_cpu_ftr_fixups(unsigned long offset);
 extern void reloc_got2(unsigned long offset);
 
 extern void ppc6xx_idle(void);
@@ -301,6 +300,7 @@ early_init(int r3, int r4, int r5)
 {
  	unsigned long phys;
 	unsigned long offset = reloc_offset();
+	struct cpu_spec *spec;
 
  	/* Default */
  	phys = offset + KERNELBASE;
@@ -313,8 +313,10 @@ early_init(int r3, int r4, int r5)
 	 * Identify the CPU type and fix up code sections
 	 * that depend on which cpu we have.
 	 */
-	identify_cpu(offset, 0);
-	do_cpu_ftr_fixups(offset);
+	spec = identify_cpu(offset);
+	do_feature_fixups(offset, spec->cpu_features,
+			  PTRRELOC(&__start___ftr_fixup),
+			  PTRRELOC(&__stop___ftr_fixup));
 
 	return phys;
 }

include/asm-powerpc/cputable.h

@@ -89,8 +89,11 @@ struct cpu_spec {
 
 extern struct cpu_spec		*cur_cpu_spec;
 
-extern void identify_cpu(unsigned long offset, unsigned long cpu);
-extern void do_cpu_ftr_fixups(unsigned long offset);
+extern unsigned int __start___ftr_fixup, __stop___ftr_fixup;
+
+extern struct cpu_spec *identify_cpu(unsigned long offset);
+extern void do_feature_fixups(unsigned long offset, unsigned long value,
+			      void *fixup_start, void *fixup_end);
 
 #endif /* __ASSEMBLY__ */
 

include/asm-powerpc/firmware.h

@@ -96,6 +96,8 @@ extern void machine_check_fwnmi(void);
 /* This is true if we are using the firmware NMI handler (typically LPAR) */
 extern int fwnmi_active;
 
+extern unsigned int __start___fw_ftr_fixup, __stop___fw_ftr_fixup;
+
 #else /* __ASSEMBLY__ */
 
 #define BEGIN_FW_FTR_SECTION		96: