Merge branch 'mxs/cleanup' into next/dt2

This is a dependency for mxs/dt
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/Kconfig

@@ -473,12 +473,14 @@ config ARCH_MXS
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select CLKSRC_OF
 	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK_PREPARE
 	select MULTI_IRQ_HANDLER
 	select PINCTRL
 	select SPARSE_IRQ
+	select STMP_DEVICE
 	select USE_OF
 	help
 	  Support for Freescale MXS-based family of processors
@@ -1593,6 +1595,7 @@ config HAVE_ARM_ARCH_TIMER
 config HAVE_ARM_TWD
 	bool
 	depends on SMP
+	select CLKSRC_OF if OF
 	help
 	  This options enables support for the ARM timer and watchdog unit
 

arch/arm/boot/dts/imx23.dtsi

@@ -295,6 +295,7 @@ spi2_pins_a: spi2@0 {
 			};
 
 			digctl@8001c000 {
+				compatible = "fsl,imx23-digctl";
 				reg = <0x8001c000 2000>;
 				status = "disabled";
 			};
@@ -321,6 +322,7 @@ pxp@8002a000 {
 			};
 
 			ocotp@8002c000 {
+				compatible = "fsl,ocotp";
 				reg = <0x8002c000 0x2000>;
 				status = "disabled";
 			};
@@ -360,7 +362,7 @@ apbx@80040000 {
 			ranges;
 
 			clks: clkctrl@80040000 {
-				compatible = "fsl,imx23-clkctrl";
+				compatible = "fsl,imx23-clkctrl", "fsl,clkctrl";
 				reg = <0x80040000 0x2000>;
 				#clock-cells = <1>;
 			};
@@ -426,6 +428,7 @@ timrot@80068000 {
 				compatible = "fsl,imx23-timrot", "fsl,timrot";
 				reg = <0x80068000 0x2000>;
 				interrupts = <28 29 30 31>;
+				clocks = <&clks 28>;
 			};
 
 			auart0: serial@8006c000 {

arch/arm/boot/dts/imx28.dtsi

@@ -647,6 +647,7 @@ usbphy1_pins_a: usbphy1@0 {
 			};
 
 			digctl@8001c000 {
+				compatible = "fsl,imx28-digctl";
 				reg = <0x8001c000 0x2000>;
 				interrupts = <89>;
 				status = "disabled";
@@ -676,6 +677,7 @@ pxp@8002a000 {
 			};
 
 			ocotp@8002c000 {
+				compatible = "fsl,ocotp";
 				reg = <0x8002c000 0x2000>;
 				status = "disabled";
 			};
@@ -755,7 +757,7 @@ apbx@80040000 {
 			ranges;
 
 			clks: clkctrl@80040000 {
-				compatible = "fsl,imx28-clkctrl";
+				compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
 				reg = <0x80040000 0x2000>;
 				#clock-cells = <1>;
 			};
@@ -838,6 +840,7 @@ timrot@80068000 {
 				compatible = "fsl,imx28-timrot", "fsl,timrot";
 				reg = <0x80068000 0x2000>;
 				interrupts = <48 49 50 51>;
+				clocks = <&clks 26>;
 			};
 
 			auart0: serial@8006a000 {

arch/arm/include/asm/smp_twd.h

@@ -34,12 +34,4 @@ struct twd_local_timer name __initdata = {	\
 
 int twd_local_timer_register(struct twd_local_timer *);
 
-#ifdef CONFIG_HAVE_ARM_TWD
-void twd_local_timer_of_register(void);
-#else
-static inline void twd_local_timer_of_register(void)
-{
-}
-#endif
-
 #endif

arch/arm/kernel/smp_twd.c

@@ -362,25 +362,13 @@ int __init twd_local_timer_register(struct twd_local_timer *tlt)
 }
 
 #ifdef CONFIG_OF
-const static struct of_device_id twd_of_match[] __initconst = {
-	{ .compatible = "arm,cortex-a9-twd-timer",	},
-	{ .compatible = "arm,cortex-a5-twd-timer",	},
-	{ .compatible = "arm,arm11mp-twd-timer",	},
-	{ },
-};
-
-void __init twd_local_timer_of_register(void)
+static void __init twd_local_timer_of_register(struct device_node *np)
 {
-	struct device_node *np;
 	int err;
 
 	if (!is_smp() || !setup_max_cpus)
 		return;
 
-	np = of_find_matching_node(NULL, twd_of_match);
-	if (!np)
-		return;
-
 	twd_ppi = irq_of_parse_and_map(np, 0);
 	if (!twd_ppi) {
 		err = -EINVAL;
@@ -398,4 +386,7 @@ void __init twd_local_timer_of_register(void)
 out:
 	WARN(err, "twd_local_timer_of_register failed (%d)\n", err);
 }
+CLOCKSOURCE_OF_DECLARE(arm_twd_a9, "arm,cortex-a9-twd-timer", twd_local_timer_of_register);
+CLOCKSOURCE_OF_DECLARE(arm_twd_a5, "arm,cortex-a5-twd-timer", twd_local_timer_of_register);
+CLOCKSOURCE_OF_DECLARE(arm_twd_11mp, "arm,arm11mp-twd-timer", twd_local_timer_of_register);
 #endif

arch/arm/mach-highbank/highbank.c

@@ -32,7 +32,6 @@
 #include <asm/cacheflush.h>
 #include <asm/cputype.h>
 #include <asm/smp_plat.h>
-#include <asm/smp_twd.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/timer-sp.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -119,10 +118,10 @@ static void __init highbank_timer_init(void)
 	sp804_clocksource_and_sched_clock_init(timer_base + 0x20, "timer1");
 	sp804_clockevents_init(timer_base, irq, "timer0");
 
-	twd_local_timer_of_register();
-
 	arch_timer_of_register();
 	arch_timer_sched_clock_init();
+
+	clocksource_of_init();
 }
 
 static void highbank_power_off(void)

arch/arm/mach-imx/mach-imx6q.c

@@ -12,6 +12,7 @@
 
 #include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/clocksource.h>
 #include <linux/cpu.h>
 #include <linux/delay.h>
 #include <linux/export.h>
@@ -28,11 +29,9 @@
 #include <linux/regmap.h>
 #include <linux/micrel_phy.h>
 #include <linux/mfd/syscon.h>
-#include <asm/smp_twd.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/time.h>
 #include <asm/system_misc.h>
 
 #include "common.h"
@@ -292,7 +291,7 @@ static void __init imx6q_init_irq(void)
 static void __init imx6q_timer_init(void)
 {
 	mx6q_clocks_init();
-	twd_local_timer_of_register();
+	clocksource_of_init();
 	imx_print_silicon_rev("i.MX6Q", imx6q_revision());
 }
 

arch/arm/mach-mxs/Makefile

-# Common support
-obj-y := icoll.o ocotp.o system.o timer.o mm.o
-
 obj-$(CONFIG_PM) += pm.o
-
 obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o

arch/arm/mach-mxs/include/mach/debug-macro.S

@@ -11,16 +11,13 @@
  *
  */
 
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-
 #ifdef CONFIG_DEBUG_IMX23_UART
-#define UART_PADDR	MX23_DUART_BASE_ADDR
+#define UART_PADDR	0x80070000
 #elif defined (CONFIG_DEBUG_IMX28_UART)
-#define UART_PADDR	MX28_DUART_BASE_ADDR
+#define UART_PADDR	0x80074000
 #endif
 
-#define UART_VADDR	MXS_IO_ADDRESS(UART_PADDR)
+#define UART_VADDR	0xfe100000
 
 		.macro	addruart, rp, rv, tmp
 		ldr	\rp, =UART_PADDR	@ physical

arch/arm/mach-mxs/include/mach/hardware.h

-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-#ifndef __MACH_MXS_HARDWARE_H__
-#define __MACH_MXS_HARDWARE_H__
-
-#endif /* __MACH_MXS_HARDWARE_H__ */

arch/arm/mach-mxs/include/mach/mx23.h

-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_MX23_H__
-#define __MACH_MX23_H__
-
-#include <mach/mxs.h>
-
-/*
- * OCRAM
- */
-#define MX23_OCRAM_BASE_ADDR		0x00000000
-#define MX23_OCRAM_SIZE			SZ_32K
-
-/*
- * IO
- */
-#define MX23_IO_BASE_ADDR		0x80000000
-#define MX23_IO_SIZE			SZ_1M
-
-#define MX23_ICOLL_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x000000)
-#define MX23_APBH_DMA_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x004000)
-#define MX23_BCH_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x00a000)
-#define MX23_GPMI_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x00c000)
-#define MX23_SSP1_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x010000)
-#define MX23_PINCTRL_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x018000)
-#define MX23_DIGCTL_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x01c000)
-#define MX23_ETM_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x020000)
-#define MX23_APBX_DMA_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x024000)
-#define MX23_DCP_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x028000)
-#define MX23_PXP_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x02a000)
-#define MX23_OCOTP_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x02c000)
-#define MX23_AXI_AHB0_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x02e000)
-#define MX23_LCDIF_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x030000)
-#define MX23_SSP2_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x034000)
-#define MX23_TVENC_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x038000)
-#define MX23_CLKCTRL_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x040000)
-#define MX23_SAIF0_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x042000)
-#define MX23_POWER_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x044000)
-#define MX23_SAIF1_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x046000)
-#define MX23_AUDIOOUT_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x048000)
-#define MX23_AUDIOIN_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x04c000)
-#define MX23_LRADC_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x050000)
-#define MX23_SPDIF_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x054000)
-#define MX23_I2C_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x058000)
-#define MX23_RTC_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x05c000)
-#define MX23_PWM_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x064000)
-#define MX23_TIMROT_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x068000)
-#define MX23_AUART1_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x06c000)
-#define MX23_AUART2_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x06e000)
-#define MX23_DUART_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x070000)
-#define MX23_USBPHY_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x07c000)
-#define MX23_USBCTRL_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x080000)
-#define MX23_DRAM_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x0e0000)
-
-#define MX23_IO_P2V(x)			MXS_IO_P2V(x)
-#define MX23_IO_ADDRESS(x)		IOMEM(MX23_IO_P2V(x))
-
-/*
- * IRQ
- */
-#define MX23_INT_DUART			0
-#define MX23_INT_COMMS_RX		1
-#define MX23_INT_COMMS_TX		1
-#define MX23_INT_SSP2_ERROR		2
-#define MX23_INT_VDD5V			3
-#define MX23_INT_HEADPHONE_SHORT	4
-#define MX23_INT_DAC_DMA		5
-#define MX23_INT_DAC_ERROR		6
-#define MX23_INT_ADC_DMA		7
-#define MX23_INT_ADC_ERROR		8
-#define MX23_INT_SPDIF_DMA		9
-#define MX23_INT_SAIF2_DMA		9
-#define MX23_INT_SPDIF_ERROR		10
-#define MX23_INT_SAIF1_IRQ		10
-#define MX23_INT_SAIF2_IRQ		10
-#define MX23_INT_USB_CTRL		11
-#define MX23_INT_USB_WAKEUP		12
-#define MX23_INT_GPMI_DMA		13
-#define MX23_INT_SSP1_DMA		14
-#define MX23_INT_SSP1_ERROR		15
-#define MX23_INT_GPIO0			16
-#define MX23_INT_GPIO1			17
-#define MX23_INT_GPIO2			18
-#define MX23_INT_SAIF1_DMA		19
-#define MX23_INT_SSP2_DMA		20
-#define MX23_INT_ECC8_IRQ		21
-#define MX23_INT_RTC_ALARM		22
-#define MX23_INT_AUART1_TX_DMA		23
-#define MX23_INT_AUART1			24
-#define MX23_INT_AUART1_RX_DMA		25
-#define MX23_INT_I2C_DMA		26
-#define MX23_INT_I2C_ERROR		27
-#define MX23_INT_TIMER0			28
-#define MX23_INT_TIMER1			29
-#define MX23_INT_TIMER2			30
-#define MX23_INT_TIMER3			31
-#define MX23_INT_BATT_BRNOUT		32
-#define MX23_INT_VDDD_BRNOUT		33
-#define MX23_INT_VDDIO_BRNOUT		34
-#define MX23_INT_VDD18_BRNOUT		35
-#define MX23_INT_TOUCH_DETECT		36
-#define MX23_INT_LRADC_CH0		37
-#define MX23_INT_LRADC_CH1		38
-#define MX23_INT_LRADC_CH2		39
-#define MX23_INT_LRADC_CH3		40
-#define MX23_INT_LRADC_CH4		41
-#define MX23_INT_LRADC_CH5		42
-#define MX23_INT_LRADC_CH6		43
-#define MX23_INT_LRADC_CH7		44
-#define MX23_INT_LCDIF_DMA		45
-#define MX23_INT_LCDIF_ERROR		46
-#define MX23_INT_DIGCTL_DEBUG_TRAP	47
-#define MX23_INT_RTC_1MSEC		48
-#define MX23_INT_DRI_DMA		49
-#define MX23_INT_DRI_ATTENTION		50
-#define MX23_INT_GPMI_ATTENTION		51
-#define MX23_INT_IR			52
-#define MX23_INT_DCP_VMI		53
-#define MX23_INT_DCP			54
-#define MX23_INT_BCH			56
-#define MX23_INT_PXP			57
-#define MX23_INT_AUART2_TX_DMA		58
-#define MX23_INT_AUART2			59
-#define MX23_INT_AUART2_RX_DMA		60
-#define MX23_INT_VDAC_DETECT		61
-#define MX23_INT_VDD5V_DROOP		64
-#define MX23_INT_DCDC4P2_BO		65
-
-/*
- * APBH DMA
- */
-#define MX23_DMA_SSP1			1
-#define MX23_DMA_SSP2			2
-#define MX23_DMA_GPMI0			4
-#define MX23_DMA_GPMI1			5
-#define MX23_DMA_GPMI2			6
-#define MX23_DMA_GPMI3			7
-
-/*
- * APBX DMA
- */
-#define MX23_DMA_ADC			0
-#define MX23_DMA_DAC			1
-#define MX23_DMA_SPDIF			2
-#define MX23_DMA_I2C			3
-#define MX23_DMA_SAIF0			4
-#define MX23_DMA_UART0_RX		6
-#define MX23_DMA_UART0_TX		7
-#define MX23_DMA_UART1_RX		8
-#define MX23_DMA_UART1_TX		9
-#define MX23_DMA_SAIF1			10
-
-#endif /* __MACH_MX23_H__ */

arch/arm/mach-mxs/include/mach/mx28.h

-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_MX28_H__
-#define __MACH_MX28_H__
-
-#include <mach/mxs.h>
-
-/*
- * OCRAM
- */
-#define MX28_OCRAM_BASE_ADDR		0x00000000
-#define MX28_OCRAM_SIZE			SZ_128K
-
-/*
- * IO
- */
-#define MX28_IO_BASE_ADDR		0x80000000
-#define MX28_IO_SIZE			SZ_1M
-
-#define MX28_ICOLL_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x000000)
-#define MX28_HSADC_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x002000)
-#define MX28_APBH_DMA_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x004000)
-#define MX28_PERFMON_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x006000)
-#define MX28_BCH_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x00a000)
-#define MX28_GPMI_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x00c000)
-#define MX28_SSP0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x010000)
-#define MX28_SSP1_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x012000)
-#define MX28_SSP2_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x014000)
-#define MX28_SSP3_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x016000)
-#define MX28_PINCTRL_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x018000)
-#define MX28_DIGCTL_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x01c000)
-#define MX28_ETM_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x022000)
-#define MX28_APBX_DMA_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x024000)
-#define MX28_DCP_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x028000)
-#define MX28_PXP_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x02a000)
-#define MX28_OCOTP_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x02c000)
-#define MX28_AXI_AHB0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x02e000)
-#define MX28_LCDIF_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x030000)
-#define MX28_CAN0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x032000)
-#define MX28_CAN1_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x034000)
-#define MX28_SIMDBG_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x03c000)
-#define MX28_SIMGPMISEL_BASE_ADDR	(MX28_IO_BASE_ADDR + 0x03c200)
-#define MX28_SIMSSPSEL_BASE_ADDR	(MX28_IO_BASE_ADDR + 0x03c300)
-#define MX28_SIMMEMSEL_BASE_ADDR	(MX28_IO_BASE_ADDR + 0x03c400)
-#define MX28_GPIOMON_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x03c500)
-#define MX28_SIMENET_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x03c700)
-#define MX28_ARMJTAG_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x03c800)
-#define MX28_CLKCTRL_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x040000)
-#define MX28_SAIF0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x042000)
-#define MX28_POWER_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x044000)
-#define MX28_SAIF1_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x046000)
-#define MX28_LRADC_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x050000)
-#define MX28_SPDIF_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x054000)
-#define MX28_RTC_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x056000)
-#define MX28_I2C0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x058000)
-#define MX28_I2C1_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x05a000)
-#define MX28_PWM_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x064000)
-#define MX28_TIMROT_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x068000)
-#define MX28_AUART0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x06a000)
-#define MX28_AUART1_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x06c000)
-#define MX28_AUART2_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x06e000)
-#define MX28_AUART3_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x070000)
-#define MX28_AUART4_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x072000)
-#define MX28_DUART_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x074000)
-#define MX28_USBPHY0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x07C000)
-#define MX28_USBPHY1_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x07e000)
-#define MX28_USBCTRL0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x080000)
-#define MX28_USBCTRL1_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x090000)
-#define MX28_DFLPT_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x0c0000)
-#define MX28_DRAM_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x0e0000)
-#define MX28_ENET_MAC0_BASE_ADDR	(MX28_IO_BASE_ADDR + 0x0f0000)
-#define MX28_ENET_MAC1_BASE_ADDR	(MX28_IO_BASE_ADDR + 0x0f4000)
-
-#define MX28_IO_P2V(x)			MXS_IO_P2V(x)
-#define MX28_IO_ADDRESS(x)		IOMEM(MX28_IO_P2V(x))
-
-/*
- * IRQ
- */
-#define MX28_INT_BATT_BRNOUT		0
-#define MX28_INT_VDDD_BRNOUT		1
-#define MX28_INT_VDDIO_BRNOUT		2
-#define MX28_INT_VDDA_BRNOUT		3
-#define MX28_INT_VDD5V_DROOP		4
-#define MX28_INT_DCDC4P2_BRNOUT		5
-#define MX28_INT_VDD5V			6
-#define MX28_INT_CAN0			8
-#define MX28_INT_CAN1			9
-#define MX28_INT_LRADC_TOUCH		10
-#define MX28_INT_HSADC			13
-#define MX28_INT_LRADC_THRESH0		14
-#define MX28_INT_LRADC_THRESH1		15
-#define MX28_INT_LRADC_CH0		16
-#define MX28_INT_LRADC_CH1		17
-#define MX28_INT_LRADC_CH2		18
-#define MX28_INT_LRADC_CH3		19
-#define MX28_INT_LRADC_CH4		20
-#define MX28_INT_LRADC_CH5		21
-#define MX28_INT_LRADC_CH6		22
-#define MX28_INT_LRADC_CH7		23
-#define MX28_INT_LRADC_BUTTON0		24
-#define MX28_INT_LRADC_BUTTON1		25
-#define MX28_INT_PERFMON		27
-#define MX28_INT_RTC_1MSEC		28
-#define MX28_INT_RTC_ALARM		29
-#define MX28_INT_COMMS			31
-#define MX28_INT_EMI_ERR		32
-#define MX28_INT_LCDIF			38
-#define MX28_INT_PXP			39
-#define MX28_INT_BCH			41
-#define MX28_INT_GPMI			42
-#define MX28_INT_SPDIF_ERROR		45
-#define MX28_INT_DUART			47
-#define MX28_INT_TIMER0			48
-#define MX28_INT_TIMER1			49
-#define MX28_INT_TIMER2			50
-#define MX28_INT_TIMER3			51
-#define MX28_INT_DCP_VMI		52
-#define MX28_INT_DCP			53
-#define MX28_INT_DCP_SECURE		54
-#define MX28_INT_SAIF1			58
-#define MX28_INT_SAIF0			59
-#define MX28_INT_SPDIF_DMA		66
-#define MX28_INT_I2C0_DMA		68
-#define MX28_INT_I2C1_DMA		69
-#define MX28_INT_AUART0_RX_DMA		70
-#define MX28_INT_AUART0_TX_DMA		71
-#define MX28_INT_AUART1_RX_DMA		72
-#define MX28_INT_AUART1_TX_DMA		73
-#define MX28_INT_AUART2_RX_DMA		74
-#define MX28_INT_AUART2_TX_DMA		75
-#define MX28_INT_AUART3_RX_DMA		76
-#define MX28_INT_AUART3_TX_DMA		77
-#define MX28_INT_AUART4_RX_DMA		78
-#define MX28_INT_AUART4_TX_DMA		79
-#define MX28_INT_SAIF0_DMA		80
-#define MX28_INT_SAIF1_DMA		81
-#define MX28_INT_SSP0_DMA		82
-#define MX28_INT_SSP1_DMA		83
-#define MX28_INT_SSP2_DMA		84
-#define MX28_INT_SSP3_DMA		85
-#define MX28_INT_LCDIF_DMA		86
-#define MX28_INT_HSADC_DMA		87
-#define MX28_INT_GPMI_DMA		88
-#define MX28_INT_DIGCTL_DEBUG_TRAP	89
-#define MX28_INT_USB1			92
-#define MX28_INT_USB0			93
-#define MX28_INT_USB1_WAKEUP		94
-#define MX28_INT_USB0_WAKEUP		95
-#define MX28_INT_SSP0_ERROR		96
-#define MX28_INT_SSP1_ERROR		97
-#define MX28_INT_SSP2_ERROR		98
-#define MX28_INT_SSP3_ERROR		99
-#define MX28_INT_ENET_SWI		100
-#define MX28_INT_ENET_MAC0		101
-#define MX28_INT_ENET_MAC1		102
-#define MX28_INT_ENET_MAC0_1588		103
-#define MX28_INT_ENET_MAC1_1588		104
-#define MX28_INT_I2C1_ERROR		110
-#define MX28_INT_I2C0_ERROR		111
-#define MX28_INT_AUART0			112
-#define MX28_INT_AUART1			113
-#define MX28_INT_AUART2			114
-#define MX28_INT_AUART3			115
-#define MX28_INT_AUART4			116
-#define MX28_INT_GPIO4			123
-#define MX28_INT_GPIO3			124
-#define MX28_INT_GPIO2			125
-#define MX28_INT_GPIO1			126
-#define MX28_INT_GPIO0			127
-
-/*
- * APBH DMA
- */
-#define MX28_DMA_SSP0			0
-#define MX28_DMA_SSP1			1
-#define MX28_DMA_SSP2			2
-#define MX28_DMA_SSP3			3
-#define MX28_DMA_GPMI0			4
-#define MX28_DMA_GPMI1			5
-#define MX28_DMA_GPMI2			6
-#define MX28_DMA_GPMI3			7
-#define MX28_DMA_GPMI4			8
-#define MX28_DMA_GPMI5			9
-#define MX28_DMA_GPMI6			10
-#define MX28_DMA_GPMI7			11
-#define MX28_DMA_HSADC			12
-#define MX28_DMA_LCDIF			13
-
-/*
- * APBX DMA
- */
-#define MX28_DMA_AUART4_RX		0
-#define MX28_DMA_AUART4_TX		1
-#define MX28_DMA_SPDIF_TX		2
-#define MX28_DMA_SAIF0			4
-#define MX28_DMA_SAIF1			5
-#define MX28_DMA_I2C0			6
-#define MX28_DMA_I2C1			7
-#define MX28_DMA_AUART0_RX		8
-#define MX28_DMA_AUART0_TX		9
-#define MX28_DMA_AUART1_RX		10
-#define MX28_DMA_AUART1_TX		11
-#define MX28_DMA_AUART2_RX		12
-#define MX28_DMA_AUART2_TX		13
-#define MX28_DMA_AUART3_RX		14
-#define MX28_DMA_AUART3_TX		15
-
-#endif /* __MACH_MX28_H__ */

arch/arm/mach-mxs/include/mach/mxs.h

-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_MXS_H__
-#define __MACH_MXS_H__
-
-#ifndef __ASSEMBLER__
-#include <linux/io.h>
-#endif
-#include <asm/mach-types.h>
-#include <mach/digctl.h>
-#include <mach/hardware.h>
-
-/*
- * IO addresses common to MXS-based
- */
-#define MXS_IO_BASE_ADDR		0x80000000
-#define MXS_IO_SIZE			SZ_1M
-
-#define MXS_ICOLL_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x000000)
-#define MXS_APBH_DMA_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x004000)
-#define MXS_BCH_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x00a000)
-#define MXS_GPMI_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x00c000)
-#define MXS_PINCTRL_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x018000)
-#define MXS_DIGCTL_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x01c000)
-#define MXS_APBX_DMA_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x024000)
-#define MXS_DCP_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x028000)
-#define MXS_PXP_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x02a000)
-#define MXS_OCOTP_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x02c000)
-#define MXS_AXI_AHB0_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x02e000)
-#define MXS_LCDIF_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x030000)
-#define MXS_CLKCTRL_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x040000)
-#define MXS_SAIF0_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x042000)
-#define MXS_POWER_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x044000)
-#define MXS_SAIF1_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x046000)
-#define MXS_LRADC_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x050000)
-#define MXS_SPDIF_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x054000)
-#define MXS_I2C0_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x058000)
-#define MXS_PWM_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x064000)
-#define MXS_TIMROT_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x068000)
-#define MXS_AUART1_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x06c000)
-#define MXS_AUART2_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x06e000)
-#define MXS_DRAM_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x0e0000)
-
-/*
- * It maps the whole address space to [0xf4000000, 0xf50fffff].
- *
- *	OCRAM	0x00000000+0x020000	->	0xf4000000+0x020000
- *	IO	0x80000000+0x100000	->	0xf5000000+0x100000
- */
-#define MXS_IO_P2V(x)	(0xf4000000 +					\
-			(((x) & 0x80000000) >> 7) +			\
-			(((x) & 0x000fffff)))
-
-#define MXS_IO_ADDRESS(x)	IOMEM(MXS_IO_P2V(x))
-
-#define mxs_map_entry(soc, name, _type)	{				\
-	.virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR),	\
-	.pfn = __phys_to_pfn(soc ## _ ## name ## _BASE_ADDR),		\
-	.length = soc ## _ ## name ## _SIZE,				\
-	.type = _type,							\
-}
-
-#define MXS_GPIO_NR(bank, nr)	((bank) * 32 + (nr))
-
-#define MXS_SET_ADDR		0x4
-#define MXS_CLR_ADDR		0x8
-#define MXS_TOG_ADDR		0xc
-
-#ifndef __ASSEMBLER__
-static inline void __mxs_setl(u32 mask, void __iomem *reg)
-{
-	__raw_writel(mask, reg + MXS_SET_ADDR);
-}
-
-static inline void __mxs_clrl(u32 mask, void __iomem *reg)
-{
-	__raw_writel(mask, reg + MXS_CLR_ADDR);
-}
-
-static inline void __mxs_togl(u32 mask, void __iomem *reg)
-{
-	__raw_writel(mask, reg + MXS_TOG_ADDR);
-}
-
-/*
- * MXS CPU types
- */
-#define MXS_CHIPID (MXS_IO_ADDRESS(MXS_DIGCTL_BASE_ADDR) + HW_DIGCTL_CHIPID)
-
-static inline int cpu_is_mx23(void)
-{
-	return ((__raw_readl(MXS_CHIPID) >> 16) == 0x3780);
-}
-
-static inline int cpu_is_mx28(void)
-{
-	return ((__raw_readl(MXS_CHIPID) >> 16) == 0x2800);
-}
-#endif
-
-#endif /* __MACH_MXS_H__ */

arch/arm/mach-mxs/mach-mxs.c

@@ -11,22 +11,53 @@
  */
 
 #include <linux/clk.h>
+#include <linux/clk/mxs.h>
 #include <linux/clkdev.h>
+#include <linux/clocksource.h>
 #include <linux/can/platform/flexcan.h>
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/mxs.h>
 #include <linux/micrel_phy.h>
 #include <linux/mxsfb.h>
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/phy.h>
 #include <linux/pinctrl/consumer.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/digctl.h>
-#include <mach/mxs.h>
+#include <asm/system_misc.h>
+
+/* MXS DIGCTL SAIF CLKMUX */
+#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT		0x0
+#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT	0x1
+#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0		0x2
+#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1		0x3
+
+#define MXS_GPIO_NR(bank, nr)	((bank) * 32 + (nr))
+
+#define MXS_SET_ADDR		0x4
+#define MXS_CLR_ADDR		0x8
+#define MXS_TOG_ADDR		0xc
+
+static inline void __mxs_setl(u32 mask, void __iomem *reg)
+{
+	__raw_writel(mask, reg + MXS_SET_ADDR);
+}
+
+static inline void __mxs_clrl(u32 mask, void __iomem *reg)
+{
+	__raw_writel(mask, reg + MXS_CLR_ADDR);
+}
+
+static inline void __mxs_togl(u32 mask, void __iomem *reg)
+{
+	__raw_writel(mask, reg + MXS_TOG_ADDR);
+}
 
 static struct fb_videomode mx23evk_video_modes[] = {
 	{
@@ -165,14 +196,80 @@ static struct of_dev_auxdata mxs_auxdata_lookup[] __initdata = {
 	{ /* sentinel */ }
 };
 
-static void __init imx23_timer_init(void)
-{
-	mx23_clocks_init();
-}
+#define OCOTP_WORD_OFFSET		0x20
+#define OCOTP_WORD_COUNT		0x20
+
+#define BM_OCOTP_CTRL_BUSY		(1 << 8)
+#define BM_OCOTP_CTRL_ERROR		(1 << 9)
+#define BM_OCOTP_CTRL_RD_BANK_OPEN	(1 << 12)
+
+static DEFINE_MUTEX(ocotp_mutex);
+static u32 ocotp_words[OCOTP_WORD_COUNT];
 
-static void __init imx28_timer_init(void)
+static const u32 *mxs_get_ocotp(void)
 {
-	mx28_clocks_init();
+	struct device_node *np;
+	void __iomem *ocotp_base;
+	int timeout = 0x400;
+	size_t i;
+	static int once;
+
+	if (once)
+		return ocotp_words;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,ocotp");
+	ocotp_base = of_iomap(np, 0);
+	WARN_ON(!ocotp_base);
+
+	mutex_lock(&ocotp_mutex);
+
+	/*
+	 * clk_enable(hbus_clk) for ocotp can be skipped
+	 * as it must be on when system is running.
+	 */
+
+	/* try to clear ERROR bit */
+	__mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base);
+
+	/* check both BUSY and ERROR cleared */
+	while ((__raw_readl(ocotp_base) &
+		(BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout)
+		cpu_relax();
+
+	if (unlikely(!timeout))
+		goto error_unlock;
+
+	/* open OCOTP banks for read */
+	__mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
+
+	/* approximately wait 32 hclk cycles */
+	udelay(1);
+
+	/* poll BUSY bit becoming cleared */
+	timeout = 0x400;
+	while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout)
+		cpu_relax();
+
+	if (unlikely(!timeout))
+		goto error_unlock;
+
+	for (i = 0; i < OCOTP_WORD_COUNT; i++)
+		ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET +
+						i * 0x10);
+
+	/* close banks for power saving */
+	__mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
+
+	once = 1;
+
+	mutex_unlock(&ocotp_mutex);
+
+	return ocotp_words;
+
+error_unlock:
+	mutex_unlock(&ocotp_mutex);
+	pr_err("%s: timeout in reading OCOTP\n", __func__);
+	return NULL;
 }
 
 enum mac_oui {
@@ -454,32 +551,62 @@ static void __init mxs_machine_init(void)
 		imx28_evk_post_init();
 }
 
-static const char *imx23_dt_compat[] __initdata = {
-	"fsl,imx23",
-	NULL,
-};
+#define MX23_CLKCTRL_RESET_OFFSET	0x120
+#define MX28_CLKCTRL_RESET_OFFSET	0x1e0
+#define MXS_CLKCTRL_RESET_CHIP		(1 << 1)
+
+/*
+ * Reset the system. It is called by machine_restart().
+ */
+static void mxs_restart(char mode, const char *cmd)
+{
+	struct device_node *np;
+	void __iomem *reset_addr;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,clkctrl");
+	reset_addr = of_iomap(np, 0);
+	if (!reset_addr)
+		goto soft;
+
+	if (of_device_is_compatible(np, "fsl,imx23-clkctrl"))
+		reset_addr += MX23_CLKCTRL_RESET_OFFSET;
+	else
+		reset_addr += MX28_CLKCTRL_RESET_OFFSET;
+
+	/* reset the chip */
+	__mxs_setl(MXS_CLKCTRL_RESET_CHIP, reset_addr);
 
-static const char *imx28_dt_compat[] __initdata = {
+	pr_err("Failed to assert the chip reset\n");
+
+	/* Delay to allow the serial port to show the message */
+	mdelay(50);
+
+soft:
+	/* We'll take a jump through zero as a poor second */
+	soft_restart(0);
+}
+
+static void __init mxs_timer_init(void)
+{
+	if (of_machine_is_compatible("fsl,imx23"))
+		mx23_clocks_init();
+	else
+		mx28_clocks_init();
+	clocksource_of_init();
+}
+
+static const char *mxs_dt_compat[] __initdata = {
 	"fsl,imx28",
+	"fsl,imx23",
 	NULL,
 };
 
-DT_MACHINE_START(IMX23, "Freescale i.MX23 (Device Tree)")
-	.map_io		= mx23_map_io,
-	.init_irq	= icoll_init_irq,
-	.handle_irq	= icoll_handle_irq,
-	.init_time	= imx23_timer_init,
-	.init_machine	= mxs_machine_init,
-	.dt_compat	= imx23_dt_compat,
-	.restart	= mxs_restart,
-MACHINE_END
-
-DT_MACHINE_START(IMX28, "Freescale i.MX28 (Device Tree)")
-	.map_io		= mx28_map_io,
-	.init_irq	= icoll_init_irq,
+DT_MACHINE_START(MXS, "Freescale MXS (Device Tree)")
+	.map_io		= debug_ll_io_init,
+	.init_irq	= irqchip_init,
 	.handle_irq	= icoll_handle_irq,
-	.init_time	= imx28_timer_init,
+	.init_time	= mxs_timer_init,
 	.init_machine	= mxs_machine_init,
-	.dt_compat	= imx28_dt_compat,
+	.dt_compat	= mxs_dt_compat,
 	.restart	= mxs_restart,
 MACHINE_END

arch/arm/mach-mxs/mm.c

-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License.  You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- *
- * Create static mapping between physical to virtual memory.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <mach/common.h>
-
-/*
- * Define the MX23 memory map.
- */
-static struct map_desc mx23_io_desc[] __initdata = {
-	mxs_map_entry(MX23, OCRAM, MT_DEVICE),
-	mxs_map_entry(MX23, IO, MT_DEVICE),
-};
-
-/*
- * Define the MX28 memory map.
- */
-static struct map_desc mx28_io_desc[] __initdata = {
-	mxs_map_entry(MX28, OCRAM, MT_DEVICE),
-	mxs_map_entry(MX28, IO, MT_DEVICE),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx23_map_io(void)
-{
-	iotable_init(mx23_io_desc, ARRAY_SIZE(mx23_io_desc));
-}
-
-void __init mx28_map_io(void)
-{
-	iotable_init(mx28_io_desc, ARRAY_SIZE(mx28_io_desc));
-}

arch/arm/mach-mxs/ocotp.c

-/*
- * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/mutex.h>
-
-#include <asm/processor.h>	/* for cpu_relax() */
-
-#include <mach/mxs.h>
-#include <mach/common.h>
-
-#define OCOTP_WORD_OFFSET		0x20
-#define OCOTP_WORD_COUNT		0x20
-
-#define BM_OCOTP_CTRL_BUSY		(1 << 8)
-#define BM_OCOTP_CTRL_ERROR		(1 << 9)
-#define BM_OCOTP_CTRL_RD_BANK_OPEN	(1 << 12)
-
-static DEFINE_MUTEX(ocotp_mutex);
-static u32 ocotp_words[OCOTP_WORD_COUNT];
-
-const u32 *mxs_get_ocotp(void)
-{
-	void __iomem *ocotp_base = MXS_IO_ADDRESS(MXS_OCOTP_BASE_ADDR);
-	int timeout = 0x400;
-	size_t i;
-	static int once = 0;
-
-	if (once)
-		return ocotp_words;
-
-	mutex_lock(&ocotp_mutex);
-
-	/*
-	 * clk_enable(hbus_clk) for ocotp can be skipped
-	 * as it must be on when system is running.
-	 */
-
-	/* try to clear ERROR bit */
-	__mxs_clrl(BM_OCOTP_CTRL_ERROR, ocotp_base);
-
-	/* check both BUSY and ERROR cleared */
-	while ((__raw_readl(ocotp_base) &
-		(BM_OCOTP_CTRL_BUSY | BM_OCOTP_CTRL_ERROR)) && --timeout)
-		cpu_relax();
-
-	if (unlikely(!timeout))
-		goto error_unlock;
-
-	/* open OCOTP banks for read */
-	__mxs_setl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
-
-	/* approximately wait 32 hclk cycles */
-	udelay(1);
-
-	/* poll BUSY bit becoming cleared */
-	timeout = 0x400;
-	while ((__raw_readl(ocotp_base) & BM_OCOTP_CTRL_BUSY) && --timeout)
-		cpu_relax();
-
-	if (unlikely(!timeout))
-		goto error_unlock;
-
-	for (i = 0; i < OCOTP_WORD_COUNT; i++)
-		ocotp_words[i] = __raw_readl(ocotp_base + OCOTP_WORD_OFFSET +
-						i * 0x10);
-
-	/* close banks for power saving */
-	__mxs_clrl(BM_OCOTP_CTRL_RD_BANK_OPEN, ocotp_base);
-
-	once = 1;
-
-	mutex_unlock(&ocotp_mutex);
-
-	return ocotp_words;
-
-error_unlock:
-	mutex_unlock(&ocotp_mutex);
-	pr_err("%s: timeout in reading OCOTP\n", __func__);
-	return NULL;
-}

arch/arm/mach-mxs/system.c

-/*
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright 2006-2007,2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/proc-fns.h>
-#include <asm/system_misc.h>
-
-#include <mach/mxs.h>
-#include <mach/common.h>
-
-#define MX23_CLKCTRL_RESET_OFFSET	0x120
-#define MX28_CLKCTRL_RESET_OFFSET	0x1e0
-#define MXS_CLKCTRL_RESET_CHIP		(1 << 1)
-
-#define MXS_MODULE_CLKGATE		(1 << 30)
-#define MXS_MODULE_SFTRST		(1 << 31)
-
-static void __iomem *mxs_clkctrl_reset_addr;
-
-/*
- * Reset the system. It is called by machine_restart().
- */
-void mxs_restart(char mode, const char *cmd)
-{
-	/* reset the chip */
-	__mxs_setl(MXS_CLKCTRL_RESET_CHIP, mxs_clkctrl_reset_addr);
-
-	pr_err("Failed to assert the chip reset\n");
-
-	/* Delay to allow the serial port to show the message */
-	mdelay(50);
-
-	/* We'll take a jump through zero as a poor second */
-	soft_restart(0);
-}
-
-static int __init mxs_arch_reset_init(void)
-{
-	struct clk *clk;
-
-	mxs_clkctrl_reset_addr = MXS_IO_ADDRESS(MXS_CLKCTRL_BASE_ADDR) +
-				(cpu_is_mx23() ? MX23_CLKCTRL_RESET_OFFSET :
-						 MX28_CLKCTRL_RESET_OFFSET);
-
-	clk = clk_get_sys("rtc", NULL);
-	if (!IS_ERR(clk))
-		clk_prepare_enable(clk);
-
-	return 0;
-}
-core_initcall(mxs_arch_reset_init);
-
-/*
- * Clear the bit and poll it cleared.  This is usually called with
- * a reset address and mask being either SFTRST(bit 31) or CLKGATE
- * (bit 30).
- */
-static int clear_poll_bit(void __iomem *addr, u32 mask)
-{
-	int timeout = 0x400;
-
-	/* clear the bit */
-	__mxs_clrl(mask, addr);
-
-	/*
-	 * SFTRST needs 3 GPMI clocks to settle, the reference manual
-	 * recommends to wait 1us.
-	 */
-	udelay(1);
-
-	/* poll the bit becoming clear */
-	while ((__raw_readl(addr) & mask) && --timeout)
-		/* nothing */;
-
-	return !timeout;
-}
-
-int mxs_reset_block(void __iomem *reset_addr)
-{
-	int ret;
-	int timeout = 0x400;
-
-	/* clear and poll SFTRST */
-	ret = clear_poll_bit(reset_addr, MXS_MODULE_SFTRST);
-	if (unlikely(ret))
-		goto error;
-
-	/* clear CLKGATE */
-	__mxs_clrl(MXS_MODULE_CLKGATE, reset_addr);
-
-	/* set SFTRST to reset the block */
-	__mxs_setl(MXS_MODULE_SFTRST, reset_addr);
-	udelay(1);
-
-	/* poll CLKGATE becoming set */
-	while ((!(__raw_readl(reset_addr) & MXS_MODULE_CLKGATE)) && --timeout)
-		/* nothing */;
-	if (unlikely(!timeout))
-		goto error;
-
-	/* clear and poll SFTRST */
-	ret = clear_poll_bit(reset_addr, MXS_MODULE_SFTRST);
-	if (unlikely(ret))
-		goto error;
-
-	/* clear and poll CLKGATE */
-	ret = clear_poll_bit(reset_addr, MXS_MODULE_CLKGATE);
-	if (unlikely(ret))
-		goto error;
-
-	return 0;
-
-error:
-	pr_err("%s(%p): module reset timeout\n", __func__, reset_addr);
-	return -ETIMEDOUT;
-}
-EXPORT_SYMBOL(mxs_reset_block);

arch/arm/mach-omap2/timer.c

@@ -597,7 +597,7 @@ void __init omap4_local_timer_init(void)
 		int err;
 
 		if (of_have_populated_dt()) {
-			twd_local_timer_of_register();
+			clocksource_of_init();
 			return;
 		}
 

arch/arm/mach-spear13xx/spear13xx.c

@@ -15,12 +15,12 @@
 
 #include <linux/amba/pl022.h>
 #include <linux/clk.h>
+#include <linux/clocksource.h>
 #include <linux/dw_dmac.h>
 #include <linux/err.h>
 #include <linux/of.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/map.h>
-#include <asm/smp_twd.h>
 #include <mach/dma.h>
 #include <mach/generic.h>
 #include <mach/spear.h>
@@ -179,5 +179,5 @@ void __init spear13xx_timer_init(void)
 	clk_put(pclk);
 
 	spear_setup_of_timer();
-	twd_local_timer_of_register();
+	clocksource_of_init();
 }

arch/arm/mach-ux500/timer.c

@@ -7,6 +7,7 @@
 #include <linux/io.h>
 #include <linux/errno.h>
 #include <linux/clksrc-dbx500-prcmu.h>
+#include <linux/clocksource.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/platform_data/clocksource-nomadik-mtu.h>
@@ -32,7 +33,7 @@ static void __init ux500_twd_init(void)
 	twd_local_timer = &u8500_twd_local_timer;
 
 	if (of_have_populated_dt())
-		twd_local_timer_of_register();
+		clocksource_of_init();
 	else {
 		err = twd_local_timer_register(twd_local_timer);
 		if (err)

arch/arm/mach-vexpress/v2m.c

@@ -5,6 +5,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/mmci.h>
 #include <linux/io.h>
+#include <linux/clocksource.h>
 #include <linux/smp.h>
 #include <linux/init.h>
 #include <linux/irqchip.h>
@@ -25,7 +26,6 @@
 #include <asm/arch_timer.h>
 #include <asm/mach-types.h>
 #include <asm/sizes.h>
-#include <asm/smp_twd.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
@@ -435,6 +435,7 @@ static void __init v2m_dt_timer_init(void)
 
 	vexpress_clk_of_init();
 
+	clocksource_of_init();
 	do {
 		node = of_find_compatible_node(node, NULL, "arm,sp804");
 	} while (node && vexpress_get_site_by_node(node) != VEXPRESS_SITE_MB);
@@ -445,8 +446,7 @@ static void __init v2m_dt_timer_init(void)
 				irq_of_parse_and_map(node, 0));
 	}
 
-	if (arch_timer_of_register() != 0)
-		twd_local_timer_of_register();
+	arch_timer_of_register();
 
 	if (arch_timer_sched_clock_init() != 0)
 		versatile_sched_clock_init(vexpress_get_24mhz_clock_base(),

drivers/clk/mxs/clk-imx23.c

@@ -15,12 +15,15 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/of.h>
-#include <mach/common.h>
-#include <mach/mx23.h>
+#include <linux/of_address.h>
 #include "clk.h"
 
-#define DIGCTRL			MX23_IO_ADDRESS(MX23_DIGCTL_BASE_ADDR)
-#define CLKCTRL			MX23_IO_ADDRESS(MX23_CLKCTRL_BASE_ADDR)
+static void __iomem *clkctrl;
+static void __iomem *digctrl;
+
+#define CLKCTRL clkctrl
+#define DIGCTRL digctrl
+
 #define PLLCTRL0		(CLKCTRL + 0x0000)
 #define CPU			(CLKCTRL + 0x0020)
 #define HBUS			(CLKCTRL + 0x0030)
@@ -48,10 +51,10 @@ static void __init clk_misc_init(void)
 	u32 val;
 
 	/* Gate off cpu clock in WFI for power saving */
-	__mxs_setl(1 << BP_CPU_INTERRUPT_WAIT, CPU);
+	writel_relaxed(1 << BP_CPU_INTERRUPT_WAIT, CPU + SET);
 
 	/* Clear BYPASS for SAIF */
-	__mxs_clrl(1 << BP_CLKSEQ_BYPASS_SAIF, CLKSEQ);
+	writel_relaxed(1 << BP_CLKSEQ_BYPASS_SAIF, CLKSEQ + CLR);
 
 	/* SAIF has to use frac div for functional operation */
 	val = readl_relaxed(SAIF);
@@ -62,14 +65,14 @@ static void __init clk_misc_init(void)
 	 * Source ssp clock from ref_io than ref_xtal,
 	 * as ref_xtal only provides 24 MHz as maximum.
 	 */
-	__mxs_clrl(1 << BP_CLKSEQ_BYPASS_SSP, CLKSEQ);
+	writel_relaxed(1 << BP_CLKSEQ_BYPASS_SSP, CLKSEQ + CLR);
 
 	/*
 	 * 480 MHz seems too high to be ssp clock source directly,
 	 * so set frac to get a 288 MHz ref_io.
 	 */
-	__mxs_clrl(0x3f << BP_FRAC_IOFRAC, FRAC);
-	__mxs_setl(30 << BP_FRAC_IOFRAC, FRAC);
+	writel_relaxed(0x3f << BP_FRAC_IOFRAC, FRAC + CLR);
+	writel_relaxed(30 << BP_FRAC_IOFRAC, FRAC + SET);
 }
 
 static const char *sel_pll[]  __initconst = { "pll", "ref_xtal", };
@@ -101,6 +104,14 @@ int __init mx23_clocks_init(void)
 	struct device_node *np;
 	u32 i;
 
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx23-digctl");
+	digctrl = of_iomap(np, 0);
+	WARN_ON(!digctrl);
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx23-clkctrl");
+	clkctrl = of_iomap(np, 0);
+	WARN_ON(!clkctrl);
+
 	clk_misc_init();
 
 	clks[ref_xtal] = mxs_clk_fixed("ref_xtal", 24000000);
@@ -153,19 +164,12 @@ int __init mx23_clocks_init(void)
 			return PTR_ERR(clks[i]);
 		}
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx23-clkctrl");
-	if (np) {
 	clk_data.clks = clks;
 	clk_data.clk_num = ARRAY_SIZE(clks);
 	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
-	}
-
-	clk_register_clkdev(clks[clk32k], NULL, "timrot");
 
 	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
 		clk_prepare_enable(clks[clks_init_on[i]]);
 
-	mxs_timer_init();
-
 	return 0;
 }

drivers/clk/mxs/clk-imx28.c

@@ -15,11 +15,12 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/of.h>
-#include <mach/common.h>
-#include <mach/mx28.h>
+#include <linux/of_address.h>
 #include "clk.h"
 
-#define CLKCTRL			MX28_IO_ADDRESS(MX28_CLKCTRL_BASE_ADDR)
+static void __iomem *clkctrl;
+#define CLKCTRL clkctrl
+
 #define PLL0CTRL0		(CLKCTRL + 0x0000)
 #define PLL1CTRL0		(CLKCTRL + 0x0020)
 #define PLL2CTRL0		(CLKCTRL + 0x0040)
@@ -53,7 +54,8 @@
 #define BP_FRAC0_IO1FRAC	16
 #define BP_FRAC0_IO0FRAC	24
 
-#define DIGCTRL			MX28_IO_ADDRESS(MX28_DIGCTL_BASE_ADDR)
+static void __iomem *digctrl;
+#define DIGCTRL digctrl
 #define BP_SAIF_CLKMUX		10
 
 /*
@@ -72,8 +74,8 @@ int mxs_saif_clkmux_select(unsigned int clkmux)
 	if (clkmux > 0x3)
 		return -EINVAL;
 
-	__mxs_clrl(0x3 << BP_SAIF_CLKMUX, DIGCTRL);
-	__mxs_setl(clkmux << BP_SAIF_CLKMUX, DIGCTRL);
+	writel_relaxed(0x3 << BP_SAIF_CLKMUX, DIGCTRL + CLR);
+	writel_relaxed(clkmux << BP_SAIF_CLKMUX, DIGCTRL + SET);
 
 	return 0;
 }
@@ -83,13 +85,13 @@ static void __init clk_misc_init(void)
 	u32 val;
 
 	/* Gate off cpu clock in WFI for power saving */
-	__mxs_setl(1 << BP_CPU_INTERRUPT_WAIT, CPU);
+	writel_relaxed(1 << BP_CPU_INTERRUPT_WAIT, CPU + SET);
 
 	/* 0 is a bad default value for a divider */
-	__mxs_setl(1 << BP_ENET_DIV_TIME, ENET);
+	writel_relaxed(1 << BP_ENET_DIV_TIME, ENET + SET);
 
 	/* Clear BYPASS for SAIF */
-	__mxs_clrl(0x3 << BP_CLKSEQ_BYPASS_SAIF0, CLKSEQ);
+	writel_relaxed(0x3 << BP_CLKSEQ_BYPASS_SAIF0, CLKSEQ + CLR);
 
 	/* SAIF has to use frac div for functional operation */
 	val = readl_relaxed(SAIF0);
@@ -109,7 +111,7 @@ static void __init clk_misc_init(void)
 	 * Source ssp clock from ref_io than ref_xtal,
 	 * as ref_xtal only provides 24 MHz as maximum.
 	 */
-	__mxs_clrl(0xf << BP_CLKSEQ_BYPASS_SSP0, CLKSEQ);
+	writel_relaxed(0xf << BP_CLKSEQ_BYPASS_SSP0, CLKSEQ + CLR);
 
 	/*
 	 * 480 MHz seems too high to be ssp clock source directly,
@@ -156,6 +158,14 @@ int __init mx28_clocks_init(void)
 	struct device_node *np;
 	u32 i;
 
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx28-digctl");
+	digctrl = of_iomap(np, 0);
+	WARN_ON(!digctrl);
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx28-clkctrl");
+	clkctrl = of_iomap(np, 0);
+	WARN_ON(!clkctrl);
+
 	clk_misc_init();
 
 	clks[ref_xtal] = mxs_clk_fixed("ref_xtal", 24000000);
@@ -231,20 +241,14 @@ int __init mx28_clocks_init(void)
 			return PTR_ERR(clks[i]);
 		}
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx28-clkctrl");
-	if (np) {
 	clk_data.clks = clks;
 	clk_data.clk_num = ARRAY_SIZE(clks);
 	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
-	}
 
-	clk_register_clkdev(clks[xbus], NULL, "timrot");
 	clk_register_clkdev(clks[enet_out], NULL, "enet_out");
 
 	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
 		clk_prepare_enable(clks[clks_init_on[i]]);
 
-	mxs_timer_init();
-
 	return 0;
 }

drivers/clocksource/Makefile

@@ -16,6 +16,7 @@ obj-$(CONFIG_CLKSRC_NOMADIK_MTU)	+= nomadik-mtu.o
 obj-$(CONFIG_CLKSRC_DBX500_PRCMU)	+= clksrc-dbx500-prcmu.o
 obj-$(CONFIG_ARMADA_370_XP_TIMER)	+= time-armada-370-xp.o
 obj-$(CONFIG_ARCH_BCM2835)	+= bcm2835_timer.o
+obj-$(CONFIG_ARCH_MXS)		+= mxs_timer.o
 obj-$(CONFIG_SUNXI_TIMER)	+= sunxi_timer.o
 obj-$(CONFIG_ARCH_TEGRA)	+= tegra20_timer.o
 obj-$(CONFIG_VT8500_TIMER)	+= vt8500_timer.o

drivers/clocksource/bcm2835_timer.c

@@ -95,23 +95,13 @@ static irqreturn_t bcm2835_time_interrupt(int irq, void *dev_id)
 	}
 }
 
-static struct of_device_id bcm2835_time_match[] __initconst = {
-	{ .compatible = "brcm,bcm2835-system-timer" },
-	{}
-};
-
-static void __init bcm2835_timer_init(void)
+static void __init bcm2835_timer_init(struct device_node *node)
 {
-	struct device_node *node;
 	void __iomem *base;
 	u32 freq;
 	int irq;
 	struct bcm2835_timer *timer;
 
-	node = of_find_matching_node(NULL, bcm2835_time_match);
-	if (!node)
-		panic("No bcm2835 timer node");
-
 	base = of_iomap(node, 0);
 	if (!base)
 		panic("Can't remap registers");

drivers/clocksource/clksrc-of.c

@@ -26,10 +26,10 @@ void __init clocksource_of_init(void)
 {
 	struct device_node *np;
 	const struct of_device_id *match;
-	void (*init_func)(void);
+	void (*init_func)(struct device_node *);
 
 	for_each_matching_node_and_match(np, __clksrc_of_table, &match) {
 		init_func = match->data;
-		init_func();
+		init_func(np);
 	}
 }

arch/arm/mach-mxs/timer.c → drivers/clocksource/mxs_timer.c

@@ -26,12 +26,12 @@
 #include <linux/clockchips.h>
 #include <linux/clk.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/of_irq.h>
+#include <linux/stmp_device.h>
 
 #include <asm/mach/time.h>
 #include <asm/sched_clock.h>
-#include <mach/mxs.h>
-#include <mach/common.h>
 
 /*
  * There are 2 versions of the timrot on Freescale MXS-based SoCs.
@@ -79,25 +79,25 @@
 static struct clock_event_device mxs_clockevent_device;
 static enum clock_event_mode mxs_clockevent_mode = CLOCK_EVT_MODE_UNUSED;
 
-static void __iomem *mxs_timrot_base = MXS_IO_ADDRESS(MXS_TIMROT_BASE_ADDR);
+static void __iomem *mxs_timrot_base;
 static u32 timrot_major_version;
 
 static inline void timrot_irq_disable(void)
 {
-	__mxs_clrl(BM_TIMROT_TIMCTRLn_IRQ_EN,
-			mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
+	__raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base +
+		     HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR);
 }
 
 static inline void timrot_irq_enable(void)
 {
-	__mxs_setl(BM_TIMROT_TIMCTRLn_IRQ_EN,
-			mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
+	__raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base +
+		     HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_SET);
 }
 
 static void timrot_irq_acknowledge(void)
 {
-	__mxs_clrl(BM_TIMROT_TIMCTRLn_IRQ,
-			mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
+	__raw_writel(BM_TIMROT_TIMCTRLn_IRQ, mxs_timrot_base +
+		     HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR);
 }
 
 static cycle_t timrotv1_get_cycles(struct clocksource *cs)
@@ -242,19 +242,15 @@ static int __init mxs_clocksource_init(struct clk *timer_clk)
 	return 0;
 }
 
-void __init mxs_timer_init(void)
+static void __init mxs_timer_init(struct device_node *np)
 {
-	struct device_node *np;
 	struct clk *timer_clk;
 	int irq;
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,timrot");
-	if (!np) {
-		pr_err("%s: failed find timrot node\n", __func__);
-		return;
-	}
+	mxs_timrot_base = of_iomap(np, 0);
+	WARN_ON(!mxs_timrot_base);
 
-	timer_clk = clk_get_sys("timrot", NULL);
+	timer_clk = of_clk_get(np, 0);
 	if (IS_ERR(timer_clk)) {
 		pr_err("%s: failed to get clk\n", __func__);
 		return;
@@ -265,11 +261,12 @@ void __init mxs_timer_init(void)
 	/*
 	 * Initialize timers to a known state
 	 */
-	mxs_reset_block(mxs_timrot_base + HW_TIMROT_ROTCTRL);
+	stmp_reset_block(mxs_timrot_base + HW_TIMROT_ROTCTRL);
 
 	/* get timrot version */
 	timrot_major_version = __raw_readl(mxs_timrot_base +
-				(cpu_is_mx23() ? MX23_TIMROT_VERSION_OFFSET :
+			(of_device_is_compatible(np, "fsl,imx23-timrot") ?
+						MX23_TIMROT_VERSION_OFFSET :
 						MX28_TIMROT_VERSION_OFFSET));
 	timrot_major_version >>= BP_TIMROT_MAJOR_VERSION;
 
@@ -304,3 +301,4 @@ void __init mxs_timer_init(void)
 	irq = irq_of_parse_and_map(np, 0);
 	setup_irq(irq, &mxs_timer_irq);
 }
+CLOCKSOURCE_OF_DECLARE(mxs, "fsl,timrot", mxs_timer_init);

drivers/clocksource/tegra20_timer.c

@@ -154,29 +154,12 @@ static struct irqaction tegra_timer_irq = {
 	.dev_id		= &tegra_clockevent,
 };
 
-static const struct of_device_id timer_match[] __initconst = {
-	{ .compatible = "nvidia,tegra20-timer" },
-	{}
-};
-
-static const struct of_device_id rtc_match[] __initconst = {
-	{ .compatible = "nvidia,tegra20-rtc" },
-	{}
-};
-
-static void __init tegra20_init_timer(void)
+static void __init tegra20_init_timer(struct device_node *np)
 {
-	struct device_node *np;
 	struct clk *clk;
 	unsigned long rate;
 	int ret;
 
-	np = of_find_matching_node(NULL, timer_match);
-	if (!np) {
-		pr_err("Failed to find timer DT node\n");
-		BUG();
-	}
-
 	timer_reg_base = of_iomap(np, 0);
 	if (!timer_reg_base) {
 		pr_err("Can't map timer registers\n");
@@ -200,30 +183,6 @@ static void __init tegra20_init_timer(void)
 
 	of_node_put(np);
 
-	np = of_find_matching_node(NULL, rtc_match);
-	if (!np) {
-		pr_err("Failed to find RTC DT node\n");
-		BUG();
-	}
-
-	rtc_base = of_iomap(np, 0);
-	if (!rtc_base) {
-		pr_err("Can't map RTC registers");
-		BUG();
-	}
-
-	/*
-	 * rtc registers are used by read_persistent_clock, keep the rtc clock
-	 * enabled
-	 */
-	clk = clk_get_sys("rtc-tegra", NULL);
-	if (IS_ERR(clk))
-		pr_warn("Unable to get rtc-tegra clock\n");
-	else
-		clk_prepare_enable(clk);
-
-	of_node_put(np);
-
 	switch (rate) {
 	case 12000000:
 		timer_writel(0x000b, TIMERUS_USEC_CFG);
@@ -259,12 +218,34 @@ static void __init tegra20_init_timer(void)
 	tegra_clockevent.irq = tegra_timer_irq.irq;
 	clockevents_config_and_register(&tegra_clockevent, 1000000,
 					0x1, 0x1fffffff);
-#ifdef CONFIG_HAVE_ARM_TWD
-	twd_local_timer_of_register();
-#endif
+}
+CLOCKSOURCE_OF_DECLARE(tegra20_timer, "nvidia,tegra20-timer", tegra20_init_timer);
+
+static void __init tegra20_init_rtc(struct device_node *np)
+{
+	struct clk *clk;
+
+	rtc_base = of_iomap(np, 0);
+	if (!rtc_base) {
+		pr_err("Can't map RTC registers");
+		BUG();
+	}
+
+	/*
+	 * rtc registers are used by read_persistent_clock, keep the rtc clock
+	 * enabled
+	 */
+	clk = clk_get_sys("rtc-tegra", NULL);
+	if (IS_ERR(clk))
+		pr_warn("Unable to get rtc-tegra clock\n");
+	else
+		clk_prepare_enable(clk);
+
+	of_node_put(np);
+
 	register_persistent_clock(NULL, tegra_read_persistent_clock);
 }
-CLOCKSOURCE_OF_DECLARE(tegra20, "nvidia,tegra20-timer", tegra20_init_timer);
+CLOCKSOURCE_OF_DECLARE(tegra20_rtc, "nvidia,tegra20-rtc", tegra20_init_rtc);
 
 #ifdef CONFIG_PM
 static u32 usec_config;

drivers/clocksource/vt8500_timer.c

@@ -129,22 +129,10 @@ static struct irqaction irq = {
 	.dev_id  = &clockevent,
 };
 
-static struct of_device_id vt8500_timer_ids[] = {
-	{ .compatible = "via,vt8500-timer" },
-	{ }
-};
-
-static void __init vt8500_timer_init(void)
+static void __init vt8500_timer_init(struct device_node *np)
 {
-	struct device_node *np;
 	int timer_irq;
 
-	np = of_find_matching_node(NULL, vt8500_timer_ids);
-	if (!np) {
-		pr_err("%s: Timer description missing from Device Tree\n",
-								__func__);
-		return;
-	}
 	regbase = of_iomap(np, 0);
 	if (!regbase) {
 		pr_err("%s: Missing iobase description in Device Tree\n",

drivers/irqchip/Makefile

@@ -2,6 +2,7 @@ obj-$(CONFIG_IRQCHIP)			+= irqchip.o
 
 obj-$(CONFIG_ARCH_BCM2835)		+= irq-bcm2835.o
 obj-$(CONFIG_ARCH_EXYNOS)		+= exynos-combiner.o
+obj-$(CONFIG_ARCH_MXS)			+= irq-mxs.o
 obj-$(CONFIG_METAG)			+= irq-metag-ext.o
 obj-$(CONFIG_METAG_PERFCOUNTER_IRQS)	+= irq-metag.o
 obj-$(CONFIG_ARCH_SUNXI)		+= irq-sunxi.o

arch/arm/mach-mxs/icoll.c → drivers/irqchip/irq-mxs.c

@@ -22,10 +22,12 @@
 #include <linux/irqdomain.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/of_irq.h>
+#include <linux/stmp_device.h>
 #include <asm/exception.h>
-#include <mach/mxs.h>
-#include <mach/common.h>
+
+#include "irqchip.h"
 
 #define HW_ICOLL_VECTOR				0x0000
 #define HW_ICOLL_LEVELACK			0x0010
@@ -38,7 +40,7 @@
 
 #define ICOLL_NUM_IRQS		128
 
-static void __iomem *icoll_base = MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR);
+static void __iomem *icoll_base;
 static struct irq_domain *icoll_domain;
 
 static void icoll_ack_irq(struct irq_data *d)
@@ -103,23 +105,17 @@ static struct irq_domain_ops icoll_irq_domain_ops = {
 static void __init icoll_of_init(struct device_node *np,
 			  struct device_node *interrupt_parent)
 {
+	icoll_base = of_iomap(np, 0);
+	WARN_ON(!icoll_base);
+
 	/*
 	 * Interrupt Collector reset, which initializes the priority
 	 * for each irq to level 0.
 	 */
-	mxs_reset_block(icoll_base + HW_ICOLL_CTRL);
+	stmp_reset_block(icoll_base + HW_ICOLL_CTRL);
 
 	icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS,
 					     &icoll_irq_domain_ops, NULL);
 	WARN_ON(!icoll_domain);
 }
-
-static const struct of_device_id icoll_of_match[] __initconst = {
-	{.compatible = "fsl,icoll", .data = icoll_of_init},
-	{ /* sentinel */ }
-};
-
-void __init icoll_init_irq(void)
-{
-	of_irq_init(icoll_of_match);
-}
+IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init);

drivers/rtc/rtc-stmp3xxx.c

@@ -30,8 +30,6 @@
 #include <linux/stmp_device.h>
 #include <linux/stmp3xxx_rtc_wdt.h>
 
-#include <mach/common.h>
-
 #define STMP3XXX_RTC_CTRL			0x0
 #define STMP3XXX_RTC_CTRL_SET			0x4
 #define STMP3XXX_RTC_CTRL_CLR			0x8
@@ -271,7 +269,7 @@ static int stmp3xxx_rtc_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, rtc_data);
 
-	mxs_reset_block(rtc_data->io);
+	stmp_reset_block(rtc_data->io);
 	writel(STMP3XXX_RTC_PERSISTENT0_ALARM_EN |
 			STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN |
 			STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE,
@@ -319,7 +317,7 @@ static int stmp3xxx_rtc_resume(struct platform_device *dev)
 {
 	struct stmp3xxx_rtc_data *rtc_data = platform_get_drvdata(dev);
 
-	mxs_reset_block(rtc_data->io);
+	stmp_reset_block(rtc_data->io);
 	writel(STMP3XXX_RTC_PERSISTENT0_ALARM_EN |
 			STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE_EN |
 			STMP3XXX_RTC_PERSISTENT0_ALARM_WAKE,

drivers/staging/iio/adc/mxs-lradc.c

@@ -36,9 +36,6 @@
 #include <linux/delay.h>
 #include <linux/input.h>
 
-#include <mach/mxs.h>
-#include <mach/common.h>
-
 #include <linux/iio/iio.h>
 #include <linux/iio/buffer.h>
 #include <linux/iio/trigger.h>

arch/arm/mach-mxs/include/mach/digctl.h → include/linux/clk/mxs.h

 /*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
 
-#ifndef __MACH_DIGCTL_H__
-#define __MACH_DIGCTL_H__
+#ifndef __LINUX_CLK_MXS_H
+#define __LINUX_CLK_MXS_H
 
-/* MXS DIGCTL SAIF CLKMUX */
-#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT		0x0
-#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT	0x1
-#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0		0x2
-#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1		0x3
+int mx23_clocks_init(void);
+int mx28_clocks_init(void);
+int mxs_saif_clkmux_select(unsigned int clkmux);
 
-#define HW_DIGCTL_CTRL			0x0
-#define  BP_DIGCTL_CTRL_SAIF_CLKMUX	10
-#define  BM_DIGCTL_CTRL_SAIF_CLKMUX	(0x3 << 10)
-#define HW_DIGCTL_CHIPID		0x310
 #endif

include/linux/clocksource.h

@@ -340,6 +340,7 @@ extern void clocksource_of_init(void);
 		__used __section(__clksrc_of_table)			\
 		 = { .compatible = compat, .data = fn };
 #else
+static inline void clocksource_of_init(void) {}
 #define CLOCKSOURCE_OF_DECLARE(name, compat, fn)
 #endif
 

arch/arm/mach-mxs/include/mach/common.h → include/linux/irqchip/mxs.h

 /*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
 
-#ifndef __MACH_MXS_COMMON_H__
-#define __MACH_MXS_COMMON_H__
-
-extern const u32 *mxs_get_ocotp(void);
-extern int mxs_reset_block(void __iomem *);
-extern void mxs_timer_init(void);
-extern void mxs_restart(char, const char *);
-extern int mxs_saif_clkmux_select(unsigned int clkmux);
-
-extern int mx23_clocks_init(void);
-extern void mx23_map_io(void);
-
-extern int mx28_clocks_init(void);
-extern void mx28_map_io(void);
+#ifndef __LINUX_IRQCHIP_MXS_H
+#define __LINUX_IRQCHIP_MXS_H
 
-extern void icoll_init_irq(void);
 extern void icoll_handle_irq(struct pt_regs *);
 
-#endif /* __MACH_MXS_COMMON_H__ */
+#endif

sound/soc/mxs/mxs-saif.c

@@ -33,11 +33,12 @@
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
 #include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <mach/mxs.h>
 
 #include "mxs-saif.h"
 
+#define MXS_SET_ADDR	0x4
+#define MXS_CLR_ADDR	0x8
+
 static struct mxs_saif *mxs_saif[2];
 
 /*