Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull scheduler updates from Ingo Molnar:
 "The main changes are:

   - Migrate CPU-intense 'misfit' tasks on asymmetric capacity systems,
     to better utilize (much) faster 'big core' CPUs. (Morten Rasmussen,
     Valentin Schneider)

   - Topology handling improvements, in particular when CPU capacity
     changes and related load-balancing fixes/improvements (Morten
     Rasmussen)

   - ... plus misc other improvements, fixes and updates"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
  sched/completions/Documentation: Add recommendation for dynamic and ONSTACK completions
  sched/completions/Documentation: Clean up the document some more
  sched/completions/Documentation: Fix a couple of punctuation nits
  cpu/SMT: State SMT is disabled even with nosmt and without "=force"
  sched/core: Fix comment regarding nr_iowait_cpu() and get_iowait_load()
  sched/fair: Remove setting task's se->runnable_weight during PELT update
  sched/fair: Disable LB_BIAS by default
  sched/pelt: Fix warning and clean up IRQ PELT config
  sched/topology: Make local variables static
  sched/debug: Use symbolic names for task state constants
  sched/numa: Remove unused numa_stats::nr_running field
  sched/numa: Remove unused code from update_numa_stats()
  sched/debug: Explicitly cast sched_feat() to bool
  sched/core: Disable SD_PREFER_SIBLING on asymmetric CPU capacity domains
  sched/fair: Don't move tasks to lower capacity CPUs unless necessary
  sched/fair: Set rq->rd->overload when misfit
  sched/fair: Wrap rq->rd->overload accesses with READ/WRITE_ONCE()
  sched/core: Change root_domain->overload type to int
  sched/fair: Change 'prefer_sibling' type to bool
  sched/fair: Kick nohz balance if rq->misfit_task_load
  ...

Documentation/scheduler/completion.txt

-completions - wait for completion handling
-==========================================
-
-This document was originally written based on 3.18.0 (linux-next)
+Completions - "wait for completion" barrier APIs
+================================================
 
 Introduction:
 -------------
 
-If you have one or more threads of execution that must wait for some process
+If you have one or more threads that must wait for some kernel activity
 to have reached a point or a specific state, completions can provide a
 race-free solution to this problem. Semantically they are somewhat like a
-pthread_barrier and have similar use-cases.
+pthread_barrier() and have similar use-cases.
 
 Completions are a code synchronization mechanism which is preferable to any
-misuse of locks. Any time you think of using yield() or some quirky
-msleep(1) loop to allow something else to proceed, you probably want to
-look into using one of the wait_for_completion*() calls instead. The
-advantage of using completions is clear intent of the code, but also more
-efficient code as both threads can continue until the result is actually
-needed.
-
-Completions are built on top of the generic event infrastructure in Linux,
-with the event reduced to a simple flag (appropriately called "done") in
-struct completion that tells the waiting threads of execution if they
-can continue safely.
-
-As completions are scheduling related, the code is found in
+misuse of locks/semaphores and busy-loops. Any time you think of using
+yield() or some quirky msleep(1) loop to allow something else to proceed,
+you probably want to look into using one of the wait_for_completion*()
+calls and complete() instead.
+
+The advantage of using completions is that they have a well defined, focused
+purpose which makes it very easy to see the intent of the code, but they
+also result in more efficient code as all threads can continue execution
+until the result is actually needed, and both the waiting and the signalling
+is highly efficient using low level scheduler sleep/wakeup facilities.
+
+Completions are built on top of the waitqueue and wakeup infrastructure of
+the Linux scheduler. The event the threads on the waitqueue are waiting for
+is reduced to a simple flag in 'struct completion', appropriately called "done".
+
+As completions are scheduling related, the code can be found in
 kernel/sched/completion.c.
 
 
 Usage:
 ------
 
-There are three parts to using completions, the initialization of the
-struct completion, the waiting part through a call to one of the variants of
-wait_for_completion() and the signaling side through a call to complete()
-or complete_all(). Further there are some helper functions for checking the
-state of completions.
+There are three main parts to using completions:
+
+ - the initialization of the 'struct completion' synchronization object
+ - the waiting part through a call to one of the variants of wait_for_completion(),
+ - the signaling side through a call to complete() or complete_all().
+
+There are also some helper functions for checking the state of completions.
+Note that while initialization must happen first, the waiting and signaling
+part can happen in any order. I.e. it's entirely normal for a thread
+to have marked a completion as 'done' before another thread checks whether
+it has to wait for it.
 
-To use completions one needs to include <linux/completion.h> and
-create a variable of type struct completion. The structure used for
-handling of completions is:
+To use completions you need to #include <linux/completion.h> and
+create a static or dynamic variable of type 'struct completion',
+which has only two fields:
 
 	struct completion {
 		unsigned int done;
 		wait_queue_head_t wait;
 	};
 
-providing the wait queue to place tasks on for waiting and the flag for
-indicating the state of affairs.
+This provides the ->wait waitqueue to place tasks on for waiting (if any), and
+the ->done completion flag for indicating whether it's completed or not.
 
-Completions should be named to convey the intent of the waiter. A good
-example is:
+Completions should be named to refer to the event that is being synchronized on.
+A good example is:
 
 	wait_for_completion(&early_console_added);
 
 	complete(&early_console_added);
 
-Good naming (as always) helps code readability.
+Good, intuitive naming (as always) helps code readability. Naming a completion
+'complete' is not helpful unless the purpose is super obvious...
 
 
 Initializing completions:
 -------------------------
 
-Initialization of dynamically allocated completions, often embedded in
-other structures, is done with:
+Dynamically allocated completion objects should preferably be embedded in data
+structures that are assured to be alive for the life-time of the function/driver,
+to prevent races with asynchronous complete() calls from occurring.
+
+Particular care should be taken when using the _timeout() or _killable()/_interruptible()
+variants of wait_for_completion(), as it must be assured that memory de-allocation
+does not happen until all related activities (complete() or reinit_completion())
+have taken place, even if these wait functions return prematurely due to a timeout
+or a signal triggering.
+
+Initializing of dynamically allocated completion objects is done via a call to
+init_completion():
 
-	void init_completion(&done);
+	init_completion(&dynamic_object->done);
 
-Initialization is accomplished by initializing the wait queue and setting
-the default state to "not available", that is, "done" is set to 0.
+In this call we initialize the waitqueue and set ->done to 0, i.e. "not completed"
+or "not done".
 
 The re-initialization function, reinit_completion(), simply resets the
-done element to "not available", thus again to 0, without touching the
-wait queue. Calling init_completion() twice on the same completion object is
+->done field to 0 ("not done"), without touching the waitqueue.
+Callers of this function must make sure that there are no racy
+wait_for_completion() calls going on in parallel.
+
+Calling init_completion() on the same completion object twice is
 most likely a bug as it re-initializes the queue to an empty queue and
-enqueued tasks could get "lost" - use reinit_completion() in that case.
+enqueued tasks could get "lost" - use reinit_completion() in that case,
+but be aware of other races.
+
+For static declaration and initialization, macros are available.
+
+For static (or global) declarations in file scope you can use DECLARE_COMPLETION():
 
-For static declaration and initialization, macros are available. These are:
+	static DECLARE_COMPLETION(setup_done);
+	DECLARE_COMPLETION(setup_done);
 
-	static DECLARE_COMPLETION(setup_done)
+Note that in this case the completion is boot time (or module load time)
+initialized to 'not done' and doesn't require an init_completion() call.
 
-used for static declarations in file scope. Within functions the static
-initialization should always use:
+When a completion is declared as a local variable within a function,
+then the initialization should always use DECLARE_COMPLETION_ONSTACK()
+explicitly, not just to make lockdep happy, but also to make it clear
+that limited scope had been considered and is intentional:
 
 	DECLARE_COMPLETION_ONSTACK(setup_done)
 
-suitable for automatic/local variables on the stack and will make lockdep
-happy. Note also that one needs to make *sure* the completion passed to
-work threads remains in-scope, and no references remain to on-stack data
-when the initiating function returns.
+Note that when using completion objects as local variables you must be
+acutely aware of the short life time of the function stack: the function
+must not return to a calling context until all activities (such as waiting
+threads) have ceased and the completion object is completely unused.
 
-Using on-stack completions for code that calls any of the _timeout or
-_interruptible/_killable variants is not advisable as they will require
-additional synchronization to prevent the on-stack completion object in
-the timeout/signal cases from going out of scope. Consider using dynamically
-allocated completions when intending to use the _interruptible/_killable
-or _timeout variants of wait_for_completion().
+To emphasise this again: in particular when using some of the waiting API variants
+with more complex outcomes, such as the timeout or signalling (_timeout(),
+_killable() and _interruptible()) variants, the wait might complete
+prematurely while the object might still be in use by another thread - and a return
+from the wait_on_completion*() caller function will deallocate the function
+stack and cause subtle data corruption if a complete() is done in some
+other thread. Simple testing might not trigger these kinds of races.
 
+If unsure, use dynamically allocated completion objects, preferably embedded
+in some other long lived object that has a boringly long life time which
+exceeds the life time of any helper threads using the completion object,
+or has a lock or other synchronization mechanism to make sure complete()
+is not called on a freed object.
+
+A naive DECLARE_COMPLETION() on the stack triggers a lockdep warning.
 
 Waiting for completions:
 ------------------------
 
-For a thread of execution to wait for some concurrent work to finish, it
-calls wait_for_completion() on the initialized completion structure.
+For a thread to wait for some concurrent activity to finish, it
+calls wait_for_completion() on the initialized completion structure:
+
+	void wait_for_completion(struct completion *done)
+
 A typical usage scenario is:
 
+	CPU#1					CPU#2
+
 	struct completion setup_done;
+
 	init_completion(&setup_done);
-	initialize_work(...,&setup_done,...)
+	initialize_work(...,&setup_done,...);
 
 	/* run non-dependent code */		/* do setup */
 
-	wait_for_completion(&setup_done);         complete(setup_done)
+	wait_for_completion(&setup_done);	complete(setup_done);
 
-This is not implying any temporal order on wait_for_completion() and the
-call to complete() - if the call to complete() happened before the call
+This is not implying any particular order between wait_for_completion() and
+the call to complete() - if the call to complete() happened before the call
 to wait_for_completion() then the waiting side simply will continue
-immediately as all dependencies are satisfied if not it will block until
+immediately as all dependencies are satisfied; if not, it will block until
 completion is signaled by complete().
 
 Note that wait_for_completion() is calling spin_lock_irq()/spin_unlock_irq(),
 so it can only be called safely when you know that interrupts are enabled.
-Calling it from hard-irq or irqs-off atomic contexts will result in
-hard-to-detect spurious enabling of interrupts.
-
-wait_for_completion():
-
-	void wait_for_completion(struct completion *done):
+Calling it from IRQs-off atomic contexts will result in hard-to-detect
+spurious enabling of interrupts.
 
 The default behavior is to wait without a timeout and to mark the task as
 uninterruptible. wait_for_completion() and its variants are only safe
 in process context (as they can sleep) but not in atomic context,
-interrupt context, with disabled irqs. or preemption is disabled - see also
+interrupt context, with disabled IRQs, or preemption is disabled - see also
 try_wait_for_completion() below for handling completion in atomic/interrupt
 context.
 
 As all variants of wait_for_completion() can (obviously) block for a long
-time, you probably don't want to call this with held mutexes.
+time depending on the nature of the activity they are waiting for, so in
+most cases you probably don't want to call this with held mutexes.
 
 
-Variants available:
--------------------
+wait_for_completion*() variants available:
+------------------------------------------
 
 The below variants all return status and this status should be checked in
 most(/all) cases - in cases where the status is deliberately not checked you
@@ -148,51 +189,53 @@ probably want to make a note explaining this (e.g. see
 arch/arm/kernel/smp.c:__cpu_up()).
 
 A common problem that occurs is to have unclean assignment of return types,
-so care should be taken with assigning return-values to variables of proper
-type. Checking for the specific meaning of return values also has been found
-to be quite inaccurate e.g. constructs like
-if (!wait_for_completion_interruptible_timeout(...)) would execute the same
-code path for successful completion and for the interrupted case - which is
-probably not what you want.
+so take care to assign return-values to variables of the proper type.
+
+Checking for the specific meaning of return values also has been found
+to be quite inaccurate, e.g. constructs like:
+
+	if (!wait_for_completion_interruptible_timeout(...))
+
+... would execute the same code path for successful completion and for the
+interrupted case - which is probably not what you want.
 
 	int wait_for_completion_interruptible(struct completion *done)
 
-This function marks the task TASK_INTERRUPTIBLE. If a signal was received
-while waiting it will return -ERESTARTSYS; 0 otherwise.
+This function marks the task TASK_INTERRUPTIBLE while it is waiting.
+If a signal was received while waiting it will return -ERESTARTSYS; 0 otherwise.
 
-	unsigned long wait_for_completion_timeout(struct completion *done,
-		unsigned long timeout)
+	unsigned long wait_for_completion_timeout(struct completion *done, unsigned long timeout)
 
 The task is marked as TASK_UNINTERRUPTIBLE and will wait at most 'timeout'
-(in jiffies). If timeout occurs it returns 0 else the remaining time in
-jiffies (but at least 1). Timeouts are preferably calculated with
-msecs_to_jiffies() or usecs_to_jiffies(). If the returned timeout value is
-deliberately ignored a comment should probably explain why (e.g. see
-drivers/mfd/wm8350-core.c wm8350_read_auxadc())
+jiffies. If a timeout occurs it returns 0, else the remaining time in
+jiffies (but at least 1).
+
+Timeouts are preferably calculated with msecs_to_jiffies() or usecs_to_jiffies(),
+to make the code largely HZ-invariant.
+
+If the returned timeout value is deliberately ignored a comment should probably explain
+why (e.g. see drivers/mfd/wm8350-core.c wm8350_read_auxadc()).
 
-	long wait_for_completion_interruptible_timeout(
-		struct completion *done, unsigned long timeout)
+	long wait_for_completion_interruptible_timeout(struct completion *done, unsigned long timeout)
 
 This function passes a timeout in jiffies and marks the task as
 TASK_INTERRUPTIBLE. If a signal was received it will return -ERESTARTSYS;
-otherwise it returns 0 if the completion timed out or the remaining time in
+otherwise it returns 0 if the completion timed out, or the remaining time in
 jiffies if completion occurred.
 
 Further variants include _killable which uses TASK_KILLABLE as the
-designated tasks state and will return -ERESTARTSYS if it is interrupted or
-else 0 if completion was achieved.  There is a _timeout variant as well:
+designated tasks state and will return -ERESTARTSYS if it is interrupted,
+or 0 if completion was achieved.  There is a _timeout variant as well:
 
 	long wait_for_completion_killable(struct completion *done)
-	long wait_for_completion_killable_timeout(struct completion *done,
-		unsigned long timeout)
+	long wait_for_completion_killable_timeout(struct completion *done, unsigned long timeout)
 
 The _io variants wait_for_completion_io() behave the same as the non-_io
-variants, except for accounting waiting time as waiting on IO, which has
-an impact on how the task is accounted in scheduling stats.
+variants, except for accounting waiting time as 'waiting on IO', which has
+an impact on how the task is accounted in scheduling/IO stats:
 
 	void wait_for_completion_io(struct completion *done)
-	unsigned long wait_for_completion_io_timeout(struct completion *done
-		unsigned long timeout)
+	unsigned long wait_for_completion_io_timeout(struct completion *done, unsigned long timeout)
 
 
 Signaling completions:
@@ -200,31 +243,31 @@ Signaling completions:
 
 A thread that wants to signal that the conditions for continuation have been
 achieved calls complete() to signal exactly one of the waiters that it can
-continue.
+continue:
 
 	void complete(struct completion *done)
 
-or calls complete_all() to signal all current and future waiters.
+... or calls complete_all() to signal all current and future waiters:
 
 	void complete_all(struct completion *done)
 
 The signaling will work as expected even if completions are signaled before
 a thread starts waiting. This is achieved by the waiter "consuming"
-(decrementing) the done element of struct completion. Waiting threads
+(decrementing) the done field of 'struct completion'. Waiting threads
 wakeup order is the same in which they were enqueued (FIFO order).
 
 If complete() is called multiple times then this will allow for that number
 of waiters to continue - each call to complete() will simply increment the
-done element. Calling complete_all() multiple times is a bug though. Both
-complete() and complete_all() can be called in hard-irq/atomic context safely.
+done field. Calling complete_all() multiple times is a bug though. Both
+complete() and complete_all() can be called in IRQ/atomic context safely.
 
-There only can be one thread calling complete() or complete_all() on a
-particular struct completion at any time - serialized through the wait
+There can only be one thread calling complete() or complete_all() on a
+particular 'struct completion' at any time - serialized through the wait
 queue spinlock. Any such concurrent calls to complete() or complete_all()
 probably are a design bug.
 
-Signaling completion from hard-irq context is fine as it will appropriately
-lock with spin_lock_irqsave/spin_unlock_irqrestore and it will never sleep.
+Signaling completion from IRQ context is fine as it will appropriately
+lock with spin_lock_irqsave()/spin_unlock_irqrestore() and it will never sleep.
 
 
 try_wait_for_completion()/completion_done():
@@ -244,4 +287,4 @@ waiters) and true otherwise;
 	bool completion_done(struct completion *done)
 
 Both try_wait_for_completion() and completion_done() are safe to be called in
-hard-irq or atomic context.
+IRQ or atomic context.

arch/arm/include/asm/topology.h

@@ -33,6 +33,9 @@ const struct cpumask *cpu_coregroup_mask(int cpu);
 /* Replace task scheduler's default cpu-invariant accounting */
 #define arch_scale_cpu_capacity topology_get_cpu_scale
 
+/* Enable topology flag updates */
+#define arch_update_cpu_topology topology_update_cpu_topology
+
 #else
 
 static inline void init_cpu_topology(void) { }

arch/arm64/include/asm/topology.h

@@ -45,6 +45,9 @@ int pcibus_to_node(struct pci_bus *bus);
 /* Replace task scheduler's default cpu-invariant accounting */
 #define arch_scale_cpu_capacity topology_get_cpu_scale
 
+/* Enable topology flag updates */
+#define arch_update_cpu_topology topology_update_cpu_topology
+
 #include <asm-generic/topology.h>
 
 #endif /* _ASM_ARM_TOPOLOGY_H */

drivers/base/arch_topology.c

@@ -15,6 +15,7 @@
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/sched/topology.h>
+#include <linux/cpuset.h>
 
 DEFINE_PER_CPU(unsigned long, freq_scale) = SCHED_CAPACITY_SCALE;
 
@@ -47,6 +48,9 @@ static ssize_t cpu_capacity_show(struct device *dev,
 	return sprintf(buf, "%lu\n", topology_get_cpu_scale(NULL, cpu->dev.id));
 }
 
+static void update_topology_flags_workfn(struct work_struct *work);
+static DECLARE_WORK(update_topology_flags_work, update_topology_flags_workfn);
+
 static ssize_t cpu_capacity_store(struct device *dev,
 				  struct device_attribute *attr,
 				  const char *buf,
@@ -72,6 +76,8 @@ static ssize_t cpu_capacity_store(struct device *dev,
 		topology_set_cpu_scale(i, new_capacity);
 	mutex_unlock(&cpu_scale_mutex);
 
+	schedule_work(&update_topology_flags_work);
+
 	return count;
 }
 
@@ -96,6 +102,25 @@ static int register_cpu_capacity_sysctl(void)
 }
 subsys_initcall(register_cpu_capacity_sysctl);
 
+static int update_topology;
+
+int topology_update_cpu_topology(void)
+{
+	return update_topology;
+}
+
+/*
+ * Updating the sched_domains can't be done directly from cpufreq callbacks
+ * due to locking, so queue the work for later.
+ */
+static void update_topology_flags_workfn(struct work_struct *work)
+{
+	update_topology = 1;
+	rebuild_sched_domains();
+	pr_debug("sched_domain hierarchy rebuilt, flags updated\n");
+	update_topology = 0;
+}
+
 static u32 capacity_scale;
 static u32 *raw_capacity;
 
@@ -201,6 +226,7 @@ init_cpu_capacity_callback(struct notifier_block *nb,
 
 	if (cpumask_empty(cpus_to_visit)) {
 		topology_normalize_cpu_scale();
+		schedule_work(&update_topology_flags_work);
 		free_raw_capacity();
 		pr_debug("cpu_capacity: parsing done\n");
 		schedule_work(&parsing_done_work);

include/linux/arch_topology.h

@@ -9,6 +9,7 @@
 #include <linux/percpu.h>
 
 void topology_normalize_cpu_scale(void);
+int topology_update_cpu_topology(void);
 
 struct device_node;
 bool topology_parse_cpu_capacity(struct device_node *cpu_node, int cpu);

include/linux/sched/topology.h

@@ -23,10 +23,10 @@
 #define SD_BALANCE_FORK		0x0008	/* Balance on fork, clone */
 #define SD_BALANCE_WAKE		0x0010  /* Balance on wakeup */
 #define SD_WAKE_AFFINE		0x0020	/* Wake task to waking CPU */
-#define SD_ASYM_CPUCAPACITY	0x0040  /* Groups have different max cpu capacities */
-#define SD_SHARE_CPUCAPACITY	0x0080	/* Domain members share cpu capacity */
+#define SD_ASYM_CPUCAPACITY	0x0040  /* Domain members have different CPU capacities */
+#define SD_SHARE_CPUCAPACITY	0x0080	/* Domain members share CPU capacity */
 #define SD_SHARE_POWERDOMAIN	0x0100	/* Domain members share power domain */
-#define SD_SHARE_PKG_RESOURCES	0x0200	/* Domain members share cpu pkg resources */
+#define SD_SHARE_PKG_RESOURCES	0x0200	/* Domain members share CPU pkg resources */
 #define SD_SERIALIZE		0x0400	/* Only a single load balancing instance */
 #define SD_ASYM_PACKING		0x0800  /* Place busy groups earlier in the domain */
 #define SD_PREFER_SIBLING	0x1000	/* Prefer to place tasks in a sibling domain */

include/trace/events/sched.h

@@ -159,9 +159,14 @@ TRACE_EVENT(sched_switch,
 
 		(__entry->prev_state & (TASK_REPORT_MAX - 1)) ?
 		  __print_flags(__entry->prev_state & (TASK_REPORT_MAX - 1), "|",
-				{ 0x01, "S" }, { 0x02, "D" }, { 0x04, "T" },
-				{ 0x08, "t" }, { 0x10, "X" }, { 0x20, "Z" },
-				{ 0x40, "P" }, { 0x80, "I" }) :
+				{ TASK_INTERRUPTIBLE, "S" },
+				{ TASK_UNINTERRUPTIBLE, "D" },
+				{ __TASK_STOPPED, "T" },
+				{ __TASK_TRACED, "t" },
+				{ EXIT_DEAD, "X" },
+				{ EXIT_ZOMBIE, "Z" },
+				{ TASK_PARKED, "P" },
+				{ TASK_DEAD, "I" }) :
 		  "R",
 
 		__entry->prev_state & TASK_REPORT_MAX ? "+" : "",

init/Kconfig

@@ -415,6 +415,11 @@ config IRQ_TIME_ACCOUNTING
 
 	  If in doubt, say N here.
 
+config HAVE_SCHED_AVG_IRQ
+	def_bool y
+	depends on IRQ_TIME_ACCOUNTING || PARAVIRT_TIME_ACCOUNTING
+	depends on SMP
+
 config BSD_PROCESS_ACCT
 	bool "BSD Process Accounting"
 	depends on MULTIUSER

kernel/cpu.c

@@ -383,6 +383,7 @@ void __init cpu_smt_disable(bool force)
 		pr_info("SMT: Force disabled\n");
 		cpu_smt_control = CPU_SMT_FORCE_DISABLED;
 	} else {
+		pr_info("SMT: disabled\n");
 		cpu_smt_control = CPU_SMT_DISABLED;
 	}
 }

kernel/sched/core.c

@@ -135,9 +135,8 @@ static void update_rq_clock_task(struct rq *rq, s64 delta)
  * In theory, the compile should just see 0 here, and optimize out the call
  * to sched_rt_avg_update. But I don't trust it...
  */
-#if defined(CONFIG_IRQ_TIME_ACCOUNTING) || defined(CONFIG_PARAVIRT_TIME_ACCOUNTING)
-	s64 steal = 0, irq_delta = 0;
-#endif
+	s64 __maybe_unused steal = 0, irq_delta = 0;
+
 #ifdef CONFIG_IRQ_TIME_ACCOUNTING
 	irq_delta = irq_time_read(cpu_of(rq)) - rq->prev_irq_time;
 
@@ -177,7 +176,7 @@ static void update_rq_clock_task(struct rq *rq, s64 delta)
 
 	rq->clock_task += delta;
 
-#ifdef HAVE_SCHED_AVG_IRQ
+#ifdef CONFIG_HAVE_SCHED_AVG_IRQ
 	if ((irq_delta + steal) && sched_feat(NONTASK_CAPACITY))
 		update_irq_load_avg(rq, irq_delta + steal);
 #endif
@@ -701,6 +700,7 @@ static void set_load_weight(struct task_struct *p, bool update_load)
 	if (idle_policy(p->policy)) {
 		load->weight = scale_load(WEIGHT_IDLEPRIO);
 		load->inv_weight = WMULT_IDLEPRIO;
+		p->se.runnable_weight = load->weight;
 		return;
 	}
 
@@ -713,6 +713,7 @@ static void set_load_weight(struct task_struct *p, bool update_load)
 	} else {
 		load->weight = scale_load(sched_prio_to_weight[prio]);
 		load->inv_weight = sched_prio_to_wmult[prio];
+		p->se.runnable_weight = load->weight;
 	}
 }
 
@@ -2915,10 +2916,10 @@ unsigned long nr_iowait(void)
 }
 
 /*
- * Consumers of these two interfaces, like for example the cpufreq menu
- * governor are using nonsensical data. Boosting frequency for a CPU that has
- * IO-wait which might not even end up running the task when it does become
- * runnable.
+ * Consumers of these two interfaces, like for example the cpuidle menu
+ * governor, are using nonsensical data. Preferring shallow idle state selection
+ * for a CPU that has IO-wait which might not even end up running the task when
+ * it does become runnable.
  */
 
 unsigned long nr_iowait_cpu(int cpu)

kernel/sched/fair.c

@@ -693,6 +693,7 @@ static u64 sched_vslice(struct cfs_rq *cfs_rq, struct sched_entity *se)
 
 static int select_idle_sibling(struct task_struct *p, int prev_cpu, int cpu);
 static unsigned long task_h_load(struct task_struct *p);
+static unsigned long capacity_of(int cpu);
 
 /* Give new sched_entity start runnable values to heavy its load in infant time */
 void init_entity_runnable_average(struct sched_entity *se)
@@ -1456,7 +1457,6 @@ bool should_numa_migrate_memory(struct task_struct *p, struct page * page,
 static unsigned long weighted_cpuload(struct rq *rq);
 static unsigned long source_load(int cpu, int type);
 static unsigned long target_load(int cpu, int type);
-static unsigned long capacity_of(int cpu);
 
 /* Cached statistics for all CPUs within a node */
 struct numa_stats {
@@ -1464,8 +1464,6 @@ struct numa_stats {
 
 	/* Total compute capacity of CPUs on a node */
 	unsigned long compute_capacity;
-
-	unsigned int nr_running;
 };
 
 /*
@@ -1473,36 +1471,16 @@ struct numa_stats {
  */
 static void update_numa_stats(struct numa_stats *ns, int nid)
 {
-	int smt, cpu, cpus = 0;
-	unsigned long capacity;
+	int cpu;
 
 	memset(ns, 0, sizeof(*ns));
 	for_each_cpu(cpu, cpumask_of_node(nid)) {
 		struct rq *rq = cpu_rq(cpu);
 
-		ns->nr_running += rq->nr_running;
 		ns->load += weighted_cpuload(rq);
 		ns->compute_capacity += capacity_of(cpu);
-
-		cpus++;
 	}
 
-	/*
-	 * If we raced with hotplug and there are no CPUs left in our mask
-	 * the @ns structure is NULL'ed and task_numa_compare() will
-	 * not find this node attractive.
-	 *
-	 * We'll detect a huge imbalance and bail there.
-	 */
-	if (!cpus)
-		return;
-
-	/* smt := ceil(cpus / capacity), assumes: 1 < smt_power < 2 */
-	smt = DIV_ROUND_UP(SCHED_CAPACITY_SCALE * cpus, ns->compute_capacity);
-	capacity = cpus / smt; /* cores */
-
-	capacity = min_t(unsigned, capacity,
-		DIV_ROUND_CLOSEST(ns->compute_capacity, SCHED_CAPACITY_SCALE));
 }
 
 struct task_numa_env {
@@ -3723,6 +3701,29 @@ util_est_dequeue(struct cfs_rq *cfs_rq, struct task_struct *p, bool task_sleep)
 	WRITE_ONCE(p->se.avg.util_est, ue);
 }
 
+static inline int task_fits_capacity(struct task_struct *p, long capacity)
+{
+	return capacity * 1024 > task_util_est(p) * capacity_margin;
+}
+
+static inline void update_misfit_status(struct task_struct *p, struct rq *rq)
+{
+	if (!static_branch_unlikely(&sched_asym_cpucapacity))
+		return;
+
+	if (!p) {
+		rq->misfit_task_load = 0;
+		return;
+	}
+
+	if (task_fits_capacity(p, capacity_of(cpu_of(rq)))) {
+		rq->misfit_task_load = 0;
+		return;
+	}
+
+	rq->misfit_task_load = task_h_load(p);
+}
+
 #else /* CONFIG_SMP */
 
 #define UPDATE_TG	0x0
@@ -3752,6 +3753,7 @@ util_est_enqueue(struct cfs_rq *cfs_rq, struct task_struct *p) {}
 static inline void
 util_est_dequeue(struct cfs_rq *cfs_rq, struct task_struct *p,
 		 bool task_sleep) {}
+static inline void update_misfit_status(struct task_struct *p, struct rq *rq) {}
 
 #endif /* CONFIG_SMP */
 
@@ -6280,6 +6282,9 @@ static int wake_cap(struct task_struct *p, int cpu, int prev_cpu)
 {
 	long min_cap, max_cap;
 
+	if (!static_branch_unlikely(&sched_asym_cpucapacity))
+		return 0;
+
 	min_cap = min(capacity_orig_of(prev_cpu), capacity_orig_of(cpu));
 	max_cap = cpu_rq(cpu)->rd->max_cpu_capacity;
 
@@ -6290,7 +6295,7 @@ static int wake_cap(struct task_struct *p, int cpu, int prev_cpu)
 	/* Bring task utilization in sync with prev_cpu */
 	sync_entity_load_avg(&p->se);
 
-	return min_cap * 1024 < task_util(p) * capacity_margin;
+	return !task_fits_capacity(p, min_cap);
 }
 
 /*
@@ -6709,9 +6714,12 @@ done: __maybe_unused;
 	if (hrtick_enabled(rq))
 		hrtick_start_fair(rq, p);
 
+	update_misfit_status(p, rq);
+
 	return p;
 
 idle:
+	update_misfit_status(NULL, rq);
 	new_tasks = idle_balance(rq, rf);
 
 	/*
@@ -6917,6 +6925,13 @@ static unsigned long __read_mostly max_load_balance_interval = HZ/10;
 
 enum fbq_type { regular, remote, all };
 
+enum group_type {
+	group_other = 0,
+	group_misfit_task,
+	group_imbalanced,
+	group_overloaded,
+};
+
 #define LBF_ALL_PINNED	0x01
 #define LBF_NEED_BREAK	0x02
 #define LBF_DST_PINNED  0x04
@@ -6947,6 +6962,7 @@ struct lb_env {
 	unsigned int		loop_max;
 
 	enum fbq_type		fbq_type;
+	enum group_type		src_grp_type;
 	struct list_head	tasks;
 };
 
@@ -7327,7 +7343,7 @@ static inline bool others_have_blocked(struct rq *rq)
 	if (READ_ONCE(rq->avg_dl.util_avg))
 		return true;
 
-#if defined(CONFIG_IRQ_TIME_ACCOUNTING) || defined(CONFIG_PARAVIRT_TIME_ACCOUNTING)
+#ifdef CONFIG_HAVE_SCHED_AVG_IRQ
 	if (READ_ONCE(rq->avg_irq.util_avg))
 		return true;
 #endif
@@ -7490,12 +7506,6 @@ static unsigned long task_h_load(struct task_struct *p)
 
 /********** Helpers for find_busiest_group ************************/
 
-enum group_type {
-	group_other = 0,
-	group_imbalanced,
-	group_overloaded,
-};
-
 /*
  * sg_lb_stats - stats of a sched_group required for load_balancing
  */
@@ -7511,6 +7521,7 @@ struct sg_lb_stats {
 	unsigned int group_weight;
 	enum group_type group_type;
 	int group_no_capacity;
+	unsigned long group_misfit_task_load; /* A CPU has a task too big for its capacity */
 #ifdef CONFIG_NUMA_BALANCING
 	unsigned int nr_numa_running;
 	unsigned int nr_preferred_running;
@@ -7619,13 +7630,14 @@ static void update_cpu_capacity(struct sched_domain *sd, int cpu)
 	cpu_rq(cpu)->cpu_capacity = capacity;
 	sdg->sgc->capacity = capacity;
 	sdg->sgc->min_capacity = capacity;
+	sdg->sgc->max_capacity = capacity;
 }
 
 void update_group_capacity(struct sched_domain *sd, int cpu)
 {
 	struct sched_domain *child = sd->child;
 	struct sched_group *group, *sdg = sd->groups;
-	unsigned long capacity, min_capacity;
+	unsigned long capacity, min_capacity, max_capacity;
 	unsigned long interval;
 
 	interval = msecs_to_jiffies(sd->balance_interval);
@@ -7639,6 +7651,7 @@ void update_group_capacity(struct sched_domain *sd, int cpu)
 
 	capacity = 0;
 	min_capacity = ULONG_MAX;
+	max_capacity = 0;
 
 	if (child->flags & SD_OVERLAP) {
 		/*
@@ -7669,6 +7682,7 @@ void update_group_capacity(struct sched_domain *sd, int cpu)
 			}
 
 			min_capacity = min(capacity, min_capacity);
+			max_capacity = max(capacity, max_capacity);
 		}
 	} else  {
 		/*
@@ -7682,12 +7696,14 @@ void update_group_capacity(struct sched_domain *sd, int cpu)
 
 			capacity += sgc->capacity;
 			min_capacity = min(sgc->min_capacity, min_capacity);
+			max_capacity = max(sgc->max_capacity, max_capacity);
 			group = group->next;
 		} while (group != child->groups);
 	}
 
 	sdg->sgc->capacity = capacity;
 	sdg->sgc->min_capacity = min_capacity;
+	sdg->sgc->max_capacity = max_capacity;
 }
 
 /*
@@ -7783,16 +7799,27 @@ group_is_overloaded(struct lb_env *env, struct sg_lb_stats *sgs)
 }
 
 /*
- * group_smaller_cpu_capacity: Returns true if sched_group sg has smaller
+ * group_smaller_min_cpu_capacity: Returns true if sched_group sg has smaller
  * per-CPU capacity than sched_group ref.
  */
 static inline bool
-group_smaller_cpu_capacity(struct sched_group *sg, struct sched_group *ref)
+group_smaller_min_cpu_capacity(struct sched_group *sg, struct sched_group *ref)
 {
 	return sg->sgc->min_capacity * capacity_margin <
 						ref->sgc->min_capacity * 1024;
 }
 
+/*
+ * group_smaller_max_cpu_capacity: Returns true if sched_group sg has smaller
+ * per-CPU capacity_orig than sched_group ref.
+ */
+static inline bool
+group_smaller_max_cpu_capacity(struct sched_group *sg, struct sched_group *ref)
+{
+	return sg->sgc->max_capacity * capacity_margin <
+						ref->sgc->max_capacity * 1024;
+}
+
 static inline enum
 group_type group_classify(struct sched_group *group,
 			  struct sg_lb_stats *sgs)
@@ -7803,6 +7830,9 @@ group_type group_classify(struct sched_group *group,
 	if (sg_imbalanced(group))
 		return group_imbalanced;
 
+	if (sgs->group_misfit_task_load)
+		return group_misfit_task;
+
 	return group_other;
 }
 
@@ -7835,7 +7865,7 @@ static bool update_nohz_stats(struct rq *rq, bool force)
  * @load_idx: Load index of sched_domain of this_cpu for load calc.
  * @local_group: Does group contain this_cpu.
  * @sgs: variable to hold the statistics for this group.
- * @overload: Indicate more than one runnable task for any CPU.
+ * @overload: Indicate pullable load (e.g. >1 runnable task).
  */
 static inline void update_sg_lb_stats(struct lb_env *env,
 			struct sched_group *group, int load_idx,
@@ -7877,6 +7907,12 @@ static inline void update_sg_lb_stats(struct lb_env *env,
 		 */
 		if (!nr_running && idle_cpu(i))
 			sgs->idle_cpus++;
+
+		if (env->sd->flags & SD_ASYM_CPUCAPACITY &&
+		    sgs->group_misfit_task_load < rq->misfit_task_load) {
+			sgs->group_misfit_task_load = rq->misfit_task_load;
+			*overload = 1;
+		}
 	}
 
 	/* Adjust by relative CPU capacity of the group */
@@ -7912,6 +7948,17 @@ static bool update_sd_pick_busiest(struct lb_env *env,
 {
 	struct sg_lb_stats *busiest = &sds->busiest_stat;
 
+	/*
+	 * Don't try to pull misfit tasks we can't help.
+	 * We can use max_capacity here as reduction in capacity on some
+	 * CPUs in the group should either be possible to resolve
+	 * internally or be covered by avg_load imbalance (eventually).
+	 */
+	if (sgs->group_type == group_misfit_task &&
+	    (!group_smaller_max_cpu_capacity(sg, sds->local) ||
+	     !group_has_capacity(env, &sds->local_stat)))
+		return false;
+
 	if (sgs->group_type > busiest->group_type)
 		return true;
 
@@ -7931,7 +7978,14 @@ static bool update_sd_pick_busiest(struct lb_env *env,
 	 * power/energy consequences are not considered.
 	 */
 	if (sgs->sum_nr_running <= sgs->group_weight &&
-	    group_smaller_cpu_capacity(sds->local, sg))
+	    group_smaller_min_cpu_capacity(sds->local, sg))
+		return false;
+
+	/*
+	 * If we have more than one misfit sg go with the biggest misfit.
+	 */
+	if (sgs->group_type == group_misfit_task &&
+	    sgs->group_misfit_task_load < busiest->group_misfit_task_load)
 		return false;
 
 asym_packing:
@@ -8002,11 +8056,9 @@ static inline void update_sd_lb_stats(struct lb_env *env, struct sd_lb_stats *sd
 	struct sched_group *sg = env->sd->groups;
 	struct sg_lb_stats *local = &sds->local_stat;
 	struct sg_lb_stats tmp_sgs;
-	int load_idx, prefer_sibling = 0;
+	int load_idx;
 	bool overload = false;
-
-	if (child && child->flags & SD_PREFER_SIBLING)
-		prefer_sibling = 1;
+	bool prefer_sibling = child && child->flags & SD_PREFER_SIBLING;
 
 #ifdef CONFIG_NO_HZ_COMMON
 	if (env->idle == CPU_NEWLY_IDLE && READ_ONCE(nohz.has_blocked))
@@ -8080,8 +8132,8 @@ static inline void update_sd_lb_stats(struct lb_env *env, struct sd_lb_stats *sd
 
 	if (!env->sd->parent) {
 		/* update overload indicator if we are at root domain */
-		if (env->dst_rq->rd->overload != overload)
-			env->dst_rq->rd->overload = overload;
+		if (READ_ONCE(env->dst_rq->rd->overload) != overload)
+			WRITE_ONCE(env->dst_rq->rd->overload, overload);
 	}
 }
 
@@ -8231,8 +8283,9 @@ static inline void calculate_imbalance(struct lb_env *env, struct sd_lb_stats *s
 	 * factors in sg capacity and sgs with smaller group_type are
 	 * skipped when updating the busiest sg:
 	 */
-	if (busiest->avg_load <= sds->avg_load ||
-	    local->avg_load >= sds->avg_load) {
+	if (busiest->group_type != group_misfit_task &&
+	    (busiest->avg_load <= sds->avg_load ||
+	     local->avg_load >= sds->avg_load)) {
 		env->imbalance = 0;
 		return fix_small_imbalance(env, sds);
 	}
@@ -8266,6 +8319,12 @@ static inline void calculate_imbalance(struct lb_env *env, struct sd_lb_stats *s
 		(sds->avg_load - local->avg_load) * local->group_capacity
 	) / SCHED_CAPACITY_SCALE;
 
+	/* Boost imbalance to allow misfit task to be balanced. */
+	if (busiest->group_type == group_misfit_task) {
+		env->imbalance = max_t(long, env->imbalance,
+				       busiest->group_misfit_task_load);
+	}
+
 	/*
 	 * if *imbalance is less than the average load per runnable task
 	 * there is no guarantee that any tasks will be moved so we'll have
@@ -8332,6 +8391,10 @@ static struct sched_group *find_busiest_group(struct lb_env *env)
 	    busiest->group_no_capacity)
 		goto force_balance;
 
+	/* Misfit tasks should be dealt with regardless of the avg load */
+	if (busiest->group_type == group_misfit_task)
+		goto force_balance;
+
 	/*
 	 * If the local group is busier than the selected busiest group
 	 * don't try and pull any tasks.
@@ -8369,6 +8432,7 @@ static struct sched_group *find_busiest_group(struct lb_env *env)
 
 force_balance:
 	/* Looks like there is an imbalance. Compute it */
+	env->src_grp_type = busiest->group_type;
 	calculate_imbalance(env, &sds);
 	return env->imbalance ? sds.busiest : NULL;
 
@@ -8416,8 +8480,32 @@ static struct rq *find_busiest_queue(struct lb_env *env,
 		if (rt > env->fbq_type)
 			continue;
 
+		/*
+		 * For ASYM_CPUCAPACITY domains with misfit tasks we simply
+		 * seek the "biggest" misfit task.
+		 */
+		if (env->src_grp_type == group_misfit_task) {
+			if (rq->misfit_task_load > busiest_load) {
+				busiest_load = rq->misfit_task_load;
+				busiest = rq;
+			}
+
+			continue;
+		}
+
 		capacity = capacity_of(i);
 
+		/*
+		 * For ASYM_CPUCAPACITY domains, don't pick a CPU that could
+		 * eventually lead to active_balancing high->low capacity.
+		 * Higher per-CPU capacity is considered better than balancing
+		 * average load.
+		 */
+		if (env->sd->flags & SD_ASYM_CPUCAPACITY &&
+		    capacity_of(env->dst_cpu) < capacity &&
+		    rq->nr_running == 1)
+			continue;
+
 		wl = weighted_cpuload(rq);
 
 		/*
@@ -8485,6 +8573,9 @@ static int need_active_balance(struct lb_env *env)
 			return 1;
 	}
 
+	if (env->src_grp_type == group_misfit_task)
+		return 1;
+
 	return unlikely(sd->nr_balance_failed > sd->cache_nice_tries+2);
 }
 
@@ -9127,7 +9218,7 @@ static void nohz_balancer_kick(struct rq *rq)
 	if (time_before(now, nohz.next_balance))
 		goto out;
 
-	if (rq->nr_running >= 2) {
+	if (rq->nr_running >= 2 || rq->misfit_task_load) {
 		flags = NOHZ_KICK_MASK;
 		goto out;
 	}
@@ -9496,7 +9587,7 @@ static int idle_balance(struct rq *this_rq, struct rq_flags *rf)
 	rq_unpin_lock(this_rq, rf);
 
 	if (this_rq->avg_idle < sysctl_sched_migration_cost ||
-	    !this_rq->rd->overload) {
+	    !READ_ONCE(this_rq->rd->overload)) {
 
 		rcu_read_lock();
 		sd = rcu_dereference_check_sched_domain(this_rq->sd);
@@ -9658,6 +9749,8 @@ static void task_tick_fair(struct rq *rq, struct task_struct *curr, int queued)
 
 	if (static_branch_unlikely(&sched_numa_balancing))
 		task_tick_numa(rq, curr);
+
+	update_misfit_status(curr, rq);
 }
 
 /*

kernel/sched/features.h

@@ -39,7 +39,7 @@ SCHED_FEAT(WAKEUP_PREEMPTION, true)
 
 SCHED_FEAT(HRTICK, false)
 SCHED_FEAT(DOUBLE_TICK, false)
-SCHED_FEAT(LB_BIAS, true)
+SCHED_FEAT(LB_BIAS, false)
 
 /*
  * Decrement CPU capacity based on time not spent running tasks

kernel/sched/pelt.c

@@ -269,9 +269,6 @@ ___update_load_avg(struct sched_avg *sa, unsigned long load, unsigned long runna
 
 int __update_load_avg_blocked_se(u64 now, int cpu, struct sched_entity *se)
 {
-	if (entity_is_task(se))
-		se->runnable_weight = se->load.weight;
-
 	if (___update_load_sum(now, cpu, &se->avg, 0, 0, 0)) {
 		___update_load_avg(&se->avg, se_weight(se), se_runnable(se));
 		return 1;
@@ -282,9 +279,6 @@ int __update_load_avg_blocked_se(u64 now, int cpu, struct sched_entity *se)
 
 int __update_load_avg_se(u64 now, int cpu, struct cfs_rq *cfs_rq, struct sched_entity *se)
 {
-	if (entity_is_task(se))
-		se->runnable_weight = se->load.weight;
-
 	if (___update_load_sum(now, cpu, &se->avg, !!se->on_rq, !!se->on_rq,
 				cfs_rq->curr == se)) {
 
@@ -358,7 +352,7 @@ int update_dl_rq_load_avg(u64 now, struct rq *rq, int running)
 	return 0;
 }
 
-#if defined(CONFIG_IRQ_TIME_ACCOUNTING) || defined(CONFIG_PARAVIRT_TIME_ACCOUNTING)
+#ifdef CONFIG_HAVE_SCHED_AVG_IRQ
 /*
  * irq:
  *

kernel/sched/pelt.h

@@ -6,7 +6,7 @@ int __update_load_avg_cfs_rq(u64 now, int cpu, struct cfs_rq *cfs_rq);
 int update_rt_rq_load_avg(u64 now, struct rq *rq, int running);
 int update_dl_rq_load_avg(u64 now, struct rq *rq, int running);
 
-#if defined(CONFIG_IRQ_TIME_ACCOUNTING) || defined(CONFIG_PARAVIRT_TIME_ACCOUNTING)
+#ifdef CONFIG_HAVE_SCHED_AVG_IRQ
 int update_irq_load_avg(struct rq *rq, u64 running);
 #else
 static inline int

kernel/sched/sched.h

@@ -717,8 +717,12 @@ struct root_domain {
 	cpumask_var_t		span;
 	cpumask_var_t		online;
 
-	/* Indicate more than one runnable task for any CPU */
-	bool			overload;
+	/*
+	 * Indicate pullable load on at least one CPU, e.g:
+	 * - More than one runnable task
+	 * - Running task is misfit
+	 */
+	int			overload;
 
 	/*
 	 * The bit corresponding to a CPU gets set here if such CPU has more
@@ -845,6 +849,8 @@ struct rq {
 
 	unsigned char		idle_balance;
 
+	unsigned long		misfit_task_load;
+
 	/* For active balancing */
 	int			active_balance;
 	int			push_cpu;
@@ -858,8 +864,7 @@ struct rq {
 
 	struct sched_avg	avg_rt;
 	struct sched_avg	avg_dl;
-#if defined(CONFIG_IRQ_TIME_ACCOUNTING) || defined(CONFIG_PARAVIRT_TIME_ACCOUNTING)
-#define HAVE_SCHED_AVG_IRQ
+#ifdef CONFIG_HAVE_SCHED_AVG_IRQ
 	struct sched_avg	avg_irq;
 #endif
 	u64			idle_stamp;
@@ -1188,6 +1193,7 @@ DECLARE_PER_CPU(int, sd_llc_id);
 DECLARE_PER_CPU(struct sched_domain_shared *, sd_llc_shared);
 DECLARE_PER_CPU(struct sched_domain *, sd_numa);
 DECLARE_PER_CPU(struct sched_domain *, sd_asym);
+extern struct static_key_false sched_asym_cpucapacity;
 
 struct sched_group_capacity {
 	atomic_t		ref;
@@ -1197,6 +1203,7 @@ struct sched_group_capacity {
 	 */
 	unsigned long		capacity;
 	unsigned long		min_capacity;		/* Min per-CPU capacity in group */
+	unsigned long		max_capacity;		/* Max per-CPU capacity in group */
 	unsigned long		next_update;
 	int			imbalance;		/* XXX unrelated to capacity but shared group state */
 
@@ -1396,7 +1403,7 @@ static const_debug __maybe_unused unsigned int sysctl_sched_features =
 	0;
 #undef SCHED_FEAT
 
-#define sched_feat(x) (sysctl_sched_features & (1UL << __SCHED_FEAT_##x))
+#define sched_feat(x) !!(sysctl_sched_features & (1UL << __SCHED_FEAT_##x))
 
 #endif /* SCHED_DEBUG && HAVE_JUMP_LABEL */
 
@@ -1696,8 +1703,8 @@ static inline void add_nr_running(struct rq *rq, unsigned count)
 
 	if (prev_nr < 2 && rq->nr_running >= 2) {
 #ifdef CONFIG_SMP
-		if (!rq->rd->overload)
-			rq->rd->overload = true;
+		if (!READ_ONCE(rq->rd->overload))
+			WRITE_ONCE(rq->rd->overload, 1);
 #endif
 	}
 
@@ -2217,7 +2224,7 @@ static inline unsigned long cpu_util_rt(struct rq *rq)
 }
 #endif
 
-#ifdef HAVE_SCHED_AVG_IRQ
+#ifdef CONFIG_HAVE_SCHED_AVG_IRQ
 static inline unsigned long cpu_util_irq(struct rq *rq)
 {
 	return rq->avg_irq.util_avg;

kernel/sched/topology.c

@@ -7,8 +7,8 @@
 DEFINE_MUTEX(sched_domains_mutex);
 
 /* Protected by sched_domains_mutex: */
-cpumask_var_t sched_domains_tmpmask;
-cpumask_var_t sched_domains_tmpmask2;
+static cpumask_var_t sched_domains_tmpmask;
+static cpumask_var_t sched_domains_tmpmask2;
 
 #ifdef CONFIG_SCHED_DEBUG
 
@@ -398,6 +398,7 @@ DEFINE_PER_CPU(int, sd_llc_id);
 DEFINE_PER_CPU(struct sched_domain_shared *, sd_llc_shared);
 DEFINE_PER_CPU(struct sched_domain *, sd_numa);
 DEFINE_PER_CPU(struct sched_domain *, sd_asym);
+DEFINE_STATIC_KEY_FALSE(sched_asym_cpucapacity);
 
 static void update_top_cache_domain(int cpu)
 {
@@ -692,6 +693,7 @@ static void init_overlap_sched_group(struct sched_domain *sd,
 	sg_span = sched_group_span(sg);
 	sg->sgc->capacity = SCHED_CAPACITY_SCALE * cpumask_weight(sg_span);
 	sg->sgc->min_capacity = SCHED_CAPACITY_SCALE;
+	sg->sgc->max_capacity = SCHED_CAPACITY_SCALE;
 }
 
 static int
@@ -851,6 +853,7 @@ static struct sched_group *get_group(int cpu, struct sd_data *sdd)
 
 	sg->sgc->capacity = SCHED_CAPACITY_SCALE * cpumask_weight(sched_group_span(sg));
 	sg->sgc->min_capacity = SCHED_CAPACITY_SCALE;
+	sg->sgc->max_capacity = SCHED_CAPACITY_SCALE;
 
 	return sg;
 }
@@ -1061,7 +1064,6 @@ static struct cpumask		***sched_domains_numa_masks;
  *   SD_SHARE_PKG_RESOURCES - describes shared caches
  *   SD_NUMA                - describes NUMA topologies
  *   SD_SHARE_POWERDOMAIN   - describes shared power domain
- *   SD_ASYM_CPUCAPACITY    - describes mixed capacity topologies
  *
  * Odd one out, which beside describing the topology has a quirk also
  * prescribes the desired behaviour that goes along with it:
@@ -1073,13 +1075,12 @@ static struct cpumask		***sched_domains_numa_masks;
 	 SD_SHARE_PKG_RESOURCES |	\
 	 SD_NUMA		|	\
 	 SD_ASYM_PACKING	|	\
-	 SD_ASYM_CPUCAPACITY	|	\
 	 SD_SHARE_POWERDOMAIN)
 
 static struct sched_domain *
 sd_init(struct sched_domain_topology_level *tl,
 	const struct cpumask *cpu_map,
-	struct sched_domain *child, int cpu)
+	struct sched_domain *child, int dflags, int cpu)
 {
 	struct sd_data *sdd = &tl->data;
 	struct sched_domain *sd = *per_cpu_ptr(sdd->sd, cpu);
@@ -1100,6 +1101,9 @@ sd_init(struct sched_domain_topology_level *tl,
 			"wrong sd_flags in topology description\n"))
 		sd_flags &= ~TOPOLOGY_SD_FLAGS;
 
+	/* Apply detected topology flags */
+	sd_flags |= dflags;
+
 	*sd = (struct sched_domain){
 		.min_interval		= sd_weight,
 		.max_interval		= 2*sd_weight,
@@ -1122,7 +1126,7 @@ sd_init(struct sched_domain_topology_level *tl,
 					| 0*SD_SHARE_CPUCAPACITY
 					| 0*SD_SHARE_PKG_RESOURCES
 					| 0*SD_SERIALIZE
-					| 0*SD_PREFER_SIBLING
+					| 1*SD_PREFER_SIBLING
 					| 0*SD_NUMA
 					| sd_flags
 					,
@@ -1148,17 +1152,21 @@ sd_init(struct sched_domain_topology_level *tl,
 	if (sd->flags & SD_ASYM_CPUCAPACITY) {
 		struct sched_domain *t = sd;
 
+		/*
+		 * Don't attempt to spread across CPUs of different capacities.
+		 */
+		if (sd->child)
+			sd->child->flags &= ~SD_PREFER_SIBLING;
+
 		for_each_lower_domain(t)
 			t->flags |= SD_BALANCE_WAKE;
 	}
 
 	if (sd->flags & SD_SHARE_CPUCAPACITY) {
-		sd->flags |= SD_PREFER_SIBLING;
 		sd->imbalance_pct = 110;
 		sd->smt_gain = 1178; /* ~15% */
 
 	} else if (sd->flags & SD_SHARE_PKG_RESOURCES) {
-		sd->flags |= SD_PREFER_SIBLING;
 		sd->imbalance_pct = 117;
 		sd->cache_nice_tries = 1;
 		sd->busy_idx = 2;
@@ -1169,6 +1177,7 @@ sd_init(struct sched_domain_topology_level *tl,
 		sd->busy_idx = 3;
 		sd->idle_idx = 2;
 
+		sd->flags &= ~SD_PREFER_SIBLING;
 		sd->flags |= SD_SERIALIZE;
 		if (sched_domains_numa_distance[tl->numa_level] > RECLAIM_DISTANCE) {
 			sd->flags &= ~(SD_BALANCE_EXEC |
@@ -1178,7 +1187,6 @@ sd_init(struct sched_domain_topology_level *tl,
 
 #endif
 	} else {
-		sd->flags |= SD_PREFER_SIBLING;
 		sd->cache_nice_tries = 1;
 		sd->busy_idx = 2;
 		sd->idle_idx = 1;
@@ -1604,9 +1612,9 @@ static void __sdt_free(const struct cpumask *cpu_map)
 
 static struct sched_domain *build_sched_domain(struct sched_domain_topology_level *tl,
 		const struct cpumask *cpu_map, struct sched_domain_attr *attr,
-		struct sched_domain *child, int cpu)
+		struct sched_domain *child, int dflags, int cpu)
 {
-	struct sched_domain *sd = sd_init(tl, cpu_map, child, cpu);
+	struct sched_domain *sd = sd_init(tl, cpu_map, child, dflags, cpu);
 
 	if (child) {
 		sd->level = child->level + 1;
@@ -1632,6 +1640,65 @@ static struct sched_domain *build_sched_domain(struct sched_domain_topology_leve
 	return sd;
 }
 
+/*
+ * Find the sched_domain_topology_level where all CPU capacities are visible
+ * for all CPUs.
+ */
+static struct sched_domain_topology_level
+*asym_cpu_capacity_level(const struct cpumask *cpu_map)
+{
+	int i, j, asym_level = 0;
+	bool asym = false;
+	struct sched_domain_topology_level *tl, *asym_tl = NULL;
+	unsigned long cap;
+
+	/* Is there any asymmetry? */
+	cap = arch_scale_cpu_capacity(NULL, cpumask_first(cpu_map));
+
+	for_each_cpu(i, cpu_map) {
+		if (arch_scale_cpu_capacity(NULL, i) != cap) {
+			asym = true;
+			break;
+		}
+	}
+
+	if (!asym)
+		return NULL;
+
+	/*
+	 * Examine topology from all CPU's point of views to detect the lowest
+	 * sched_domain_topology_level where a highest capacity CPU is visible
+	 * to everyone.
+	 */
+	for_each_cpu(i, cpu_map) {
+		unsigned long max_capacity = arch_scale_cpu_capacity(NULL, i);
+		int tl_id = 0;
+
+		for_each_sd_topology(tl) {
+			if (tl_id < asym_level)
+				goto next_level;
+
+			for_each_cpu_and(j, tl->mask(i), cpu_map) {
+				unsigned long capacity;
+
+				capacity = arch_scale_cpu_capacity(NULL, j);
+
+				if (capacity <= max_capacity)
+					continue;
+
+				max_capacity = capacity;
+				asym_level = tl_id;
+				asym_tl = tl;
+			}
+next_level:
+			tl_id++;
+		}
+	}
+
+	return asym_tl;
+}
+
+
 /*
  * Build sched domains for a given set of CPUs and attach the sched domains
  * to the individual CPUs
@@ -1644,18 +1711,30 @@ build_sched_domains(const struct cpumask *cpu_map, struct sched_domain_attr *att
 	struct s_data d;
 	struct rq *rq = NULL;
 	int i, ret = -ENOMEM;
+	struct sched_domain_topology_level *tl_asym;
+	bool has_asym = false;
 
 	alloc_state = __visit_domain_allocation_hell(&d, cpu_map);
 	if (alloc_state != sa_rootdomain)
 		goto error;
 
+	tl_asym = asym_cpu_capacity_level(cpu_map);
+
 	/* Set up domains for CPUs specified by the cpu_map: */
 	for_each_cpu(i, cpu_map) {
 		struct sched_domain_topology_level *tl;
 
 		sd = NULL;
 		for_each_sd_topology(tl) {
-			sd = build_sched_domain(tl, cpu_map, attr, sd, i);
+			int dflags = 0;
+
+			if (tl == tl_asym) {
+				dflags |= SD_ASYM_CPUCAPACITY;
+				has_asym = true;
+			}
+
+			sd = build_sched_domain(tl, cpu_map, attr, sd, dflags, i);
+
 			if (tl == sched_domain_topology)
 				*per_cpu_ptr(d.sd, i) = sd;
 			if (tl->flags & SDTL_OVERLAP)
@@ -1704,6 +1783,9 @@ build_sched_domains(const struct cpumask *cpu_map, struct sched_domain_attr *att
 	}
 	rcu_read_unlock();
 
+	if (has_asym)
+		static_branch_enable_cpuslocked(&sched_asym_cpucapacity);
+
 	if (rq && sched_debug_enabled) {
 		pr_info("root domain span: %*pbl (max cpu_capacity = %lu)\n",
 			cpumask_pr_args(cpu_map), rq->rd->max_cpu_capacity);