m68knommu: move old ColdFire timers init from CPU init to timers code

The original ColdFire timer interrupt setup is used by most of the users
of the original ColdFire timer code. But the code is currently duplicated
in each of the ColdFire CPU specific init files. Move it to the timers
code that it is really part of. It is strait forward to make it conditional
on also having the original interrupt engine that it needs.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>

arch/m68k/platform/5206/config.c

@@ -19,23 +19,6 @@
 
 /***************************************************************************/
 
-static void __init m5206_timers_init(void)
-{
-	/* Timer1 is always used as system timer */
-	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
-		MCF_MBAR + MCFSIM_TIMER1ICR);
-	mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
-
-#ifdef CONFIG_HIGHPROFILE
-	/* Timer2 is to be used as a high speed profile timer  */
-	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
-		MCF_MBAR + MCFSIM_TIMER2ICR);
-	mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
-#endif
-}
-
-/***************************************************************************/
-
 void m5206_cpu_reset(void)
 {
 	local_irq_disable();
@@ -57,7 +40,6 @@ void __init config_BSP(char *commandp, int size)
 
 	mach_reset = m5206_cpu_reset;
 	mach_sched_init = hw_timer_init;
-	m5206_timers_init();
 
 	/* Only support the external interrupts on their primary level */
 	mcf_mapirq2imr(25, MCFINTC_EINT1);

arch/m68k/platform/5249/config.c

@@ -83,23 +83,6 @@ static void __init m5249_smc91x_init(void)
 
 /***************************************************************************/
 
-static void __init m5249_timers_init(void)
-{
-	/* Timer1 is always used as system timer */
-	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
-		MCF_MBAR + MCFSIM_TIMER1ICR);
-	mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
-
-#ifdef CONFIG_HIGHPROFILE
-	/* Timer2 is to be used as a high speed profile timer  */
-	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
-		MCF_MBAR + MCFSIM_TIMER2ICR);
-	mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
-#endif
-}
-
-/***************************************************************************/
-
 void m5249_cpu_reset(void)
 {
 	local_irq_disable();
@@ -115,7 +98,6 @@ void __init config_BSP(char *commandp, int size)
 {
 	mach_reset = m5249_cpu_reset;
 	mach_sched_init = hw_timer_init;
-	m5249_timers_init();
 #ifdef CONFIG_M5249C3
 	m5249_smc91x_init();
 #endif

arch/m68k/platform/5307/config.c

@@ -28,23 +28,6 @@ unsigned char ledbank = 0xff;
 
 /***************************************************************************/
 
-static void __init m5307_timers_init(void)
-{
-	/* Timer1 is always used as system timer */
-	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
-		MCF_MBAR + MCFSIM_TIMER1ICR);
-	mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
-
-#ifdef CONFIG_HIGHPROFILE
-	/* Timer2 is to be used as a high speed profile timer  */
-	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
-		MCF_MBAR + MCFSIM_TIMER2ICR);
-	mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
-#endif
-}
-
-/***************************************************************************/
-
 void m5307_cpu_reset(void)
 {
 	local_irq_disable();
@@ -67,7 +50,6 @@ void __init config_BSP(char *commandp, int size)
 
 	mach_reset = m5307_cpu_reset;
 	mach_sched_init = hw_timer_init;
-	m5307_timers_init();
 
 	/* Only support the external interrupts on their primary level */
 	mcf_mapirq2imr(25, MCFINTC_EINT1);

arch/m68k/platform/5407/config.c

@@ -19,23 +19,6 @@
 
 /***************************************************************************/
 
-static void __init m5407_timers_init(void)
-{
-	/* Timer1 is always used as system timer */
-	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
-		MCF_MBAR + MCFSIM_TIMER1ICR);
-	mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
-
-#ifdef CONFIG_HIGHPROFILE
-	/* Timer2 is to be used as a high speed profile timer  */
-	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
-		MCF_MBAR + MCFSIM_TIMER2ICR);
-	mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
-#endif
-}
-
-/***************************************************************************/
-
 void m5407_cpu_reset(void)
 {
 	local_irq_disable();
@@ -51,7 +34,6 @@ void __init config_BSP(char *commandp, int size)
 {
 	mach_reset = m5407_cpu_reset;
 	mach_sched_init = hw_timer_init;
-	m5407_timers_init();
 
 	/* Only support the external interrupts on their primary level */
 	mcf_mapirq2imr(25, MCFINTC_EINT1);

arch/m68k/platform/coldfire/timers.c

@@ -51,6 +51,25 @@ static irq_handler_t timer_interrupt;
 
 /***************************************************************************/
 
+static void init_timer_irq(void)
+{
+#ifdef MCFSIM_ICR_AUTOVEC
+	/* Timer1 is always used as system timer */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER1ICR);
+	mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
+
+#ifdef CONFIG_HIGHPROFILE
+	/* Timer2 is to be used as a high speed profile timer  */
+	writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
+		MCF_MBAR + MCFSIM_TIMER2ICR);
+	mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
+#endif
+#endif /* MCFSIM_ICR_AUTOVEC */
+}
+
+/***************************************************************************/
+
 static irqreturn_t mcftmr_tick(int irq, void *dummy)
 {
 	/* Reset the ColdFire timer */
@@ -113,6 +132,7 @@ void hw_timer_init(irq_handler_t handler)
 	clocksource_register_hz(&mcftmr_clk, FREQ);
 
 	timer_interrupt = handler;
+	init_timer_irq();
 	setup_irq(MCF_IRQ_TIMER, &mcftmr_timer_irq);
 
 #ifdef CONFIG_HIGHPROFILE