Merge branch 'bnx2x'

Yuval Mintz says:

====================
bnx2x: Bug fixes patch series

This patch series contains fixes for various flows - several SR-IOV issues
are fixed, ethtool callbacks (coalescing and register dump) are corrected,
null pointer dereference on error flows is prevented, etc.

Changes from V1
---------------
 - Patch 2  "bnx2x: Prevent an illegal pointer dereference during panic"
   is revised, with improved handling of edge cases.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/bnx2x/bnx2x.h

@@ -1197,8 +1197,9 @@ union cdu_context {
 /* TM (timers) host DB constants */
 #define TM_ILT_PAGE_SZ_HW	0
 #define TM_ILT_PAGE_SZ		(4096 << TM_ILT_PAGE_SZ_HW) /* 4K */
-/* #define TM_CONN_NUM		(CNIC_STARTING_CID+CNIC_ISCSI_CXT_MAX) */
-#define TM_CONN_NUM		1024
+#define TM_CONN_NUM		(BNX2X_FIRST_VF_CID + \
+				 BNX2X_VF_CIDS + \
+				 CNIC_ISCSI_CID_MAX)
 #define TM_ILT_SZ		(8 * TM_CONN_NUM)
 #define TM_ILT_LINES		DIV_ROUND_UP(TM_ILT_SZ, TM_ILT_PAGE_SZ)
 
@@ -1527,7 +1528,6 @@ struct bnx2x {
 #define PCI_32BIT_FLAG			(1 << 1)
 #define ONE_PORT_FLAG			(1 << 2)
 #define NO_WOL_FLAG			(1 << 3)
-#define USING_DAC_FLAG			(1 << 4)
 #define USING_MSIX_FLAG			(1 << 5)
 #define USING_MSI_FLAG			(1 << 6)
 #define DISABLE_MSI_FLAG		(1 << 7)
@@ -1621,7 +1621,7 @@ struct bnx2x {
 	u16			rx_ticks_int;
 	u16			rx_ticks;
 /* Maximal coalescing timeout in us */
-#define BNX2X_MAX_COALESCE_TOUT		(0xf0*12)
+#define BNX2X_MAX_COALESCE_TOUT		(0xff*BNX2X_BTR)
 
 	u32			lin_cnt;
 
@@ -2072,7 +2072,8 @@ u32 bnx2x_dmae_opcode(struct bnx2x *bp, u8 src_type, u8 dst_type,
 
 void bnx2x_prep_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae,
 			       u8 src_type, u8 dst_type);
-int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae);
+int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae,
+			       u32 *comp);
 
 /* FLR related routines */
 u32 bnx2x_flr_clnup_poll_count(struct bnx2x *bp);
@@ -2498,4 +2499,8 @@ enum bnx2x_pci_bus_speed {
 };
 
 void bnx2x_set_local_cmng(struct bnx2x *bp);
+
+#define MCPR_SCRATCH_BASE(bp) \
+	(CHIP_IS_E1x(bp) ? MCP_REG_MCPR_SCRATCH : MCP_A_REG_MCPR_SCRATCH)
+
 #endif /* bnx2x.h */

drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c

@@ -891,17 +891,8 @@ static void bnx2x_get_regs(struct net_device *dev,
 	 * will re-enable parity attentions right after the dump.
 	 */
 
-	/* Disable parity on path 0 */
-	bnx2x_pretend_func(bp, 0);
 	bnx2x_disable_blocks_parity(bp);
 
-	/* Disable parity on path 1 */
-	bnx2x_pretend_func(bp, 1);
-	bnx2x_disable_blocks_parity(bp);
-
-	/* Return to current function */
-	bnx2x_pretend_func(bp, BP_ABS_FUNC(bp));
-
 	dump_hdr.header_size = (sizeof(struct dump_header) / 4) - 1;
 	dump_hdr.preset = DUMP_ALL_PRESETS;
 	dump_hdr.version = BNX2X_DUMP_VERSION;
@@ -928,18 +919,9 @@ static void bnx2x_get_regs(struct net_device *dev,
 	/* Actually read the registers */
 	__bnx2x_get_regs(bp, p);
 
-	/* Re-enable parity attentions on path 0 */
-	bnx2x_pretend_func(bp, 0);
+	/* Re-enable parity attentions */
 	bnx2x_clear_blocks_parity(bp);
 	bnx2x_enable_blocks_parity(bp);
-
-	/* Re-enable parity attentions on path 1 */
-	bnx2x_pretend_func(bp, 1);
-	bnx2x_clear_blocks_parity(bp);
-	bnx2x_enable_blocks_parity(bp);
-
-	/* Return to current function */
-	bnx2x_pretend_func(bp, BP_ABS_FUNC(bp));
 }
 
 static int bnx2x_get_preset_regs_len(struct net_device *dev, u32 preset)
@@ -993,17 +975,8 @@ static int bnx2x_get_dump_data(struct net_device *dev,
 	 * will re-enable parity attentions right after the dump.
 	 */
 
-	/* Disable parity on path 0 */
-	bnx2x_pretend_func(bp, 0);
 	bnx2x_disable_blocks_parity(bp);
 
-	/* Disable parity on path 1 */
-	bnx2x_pretend_func(bp, 1);
-	bnx2x_disable_blocks_parity(bp);
-
-	/* Return to current function */
-	bnx2x_pretend_func(bp, BP_ABS_FUNC(bp));
-
 	dump_hdr.header_size = (sizeof(struct dump_header) / 4) - 1;
 	dump_hdr.preset = bp->dump_preset_idx;
 	dump_hdr.version = BNX2X_DUMP_VERSION;
@@ -1032,19 +1005,10 @@ static int bnx2x_get_dump_data(struct net_device *dev,
 	/* Actually read the registers */
 	__bnx2x_get_preset_regs(bp, p, dump_hdr.preset);
 
-	/* Re-enable parity attentions on path 0 */
-	bnx2x_pretend_func(bp, 0);
+	/* Re-enable parity attentions */
 	bnx2x_clear_blocks_parity(bp);
 	bnx2x_enable_blocks_parity(bp);
 
-	/* Re-enable parity attentions on path 1 */
-	bnx2x_pretend_func(bp, 1);
-	bnx2x_clear_blocks_parity(bp);
-	bnx2x_enable_blocks_parity(bp);
-
-	/* Return to current function */
-	bnx2x_pretend_func(bp, BP_ABS_FUNC(bp));
-
 	return 0;
 }
 

drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h

@@ -640,23 +640,35 @@ static const struct {
  * [30] MCP Latched ump_tx_parity
  * [31] MCP Latched scpad_parity
  */
-#define MISC_AEU_ENABLE_MCP_PRTY_BITS	\
+#define MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS	\
 	(AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY | \
 	 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY | \
-	 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY | \
+	 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY)
+
+#define MISC_AEU_ENABLE_MCP_PRTY_BITS	\
+	(MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS | \
 	 AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY)
 
 /* Below registers control the MCP parity attention output. When
  * MISC_AEU_ENABLE_MCP_PRTY_BITS are set - attentions are
  * enabled, when cleared - disabled.
  */
-static const u32 mcp_attn_ctl_regs[] = {
-	MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0,
-	MISC_REG_AEU_ENABLE4_NIG_0,
-	MISC_REG_AEU_ENABLE4_PXP_0,
-	MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0,
-	MISC_REG_AEU_ENABLE4_NIG_1,
-	MISC_REG_AEU_ENABLE4_PXP_1
+static const struct {
+	u32 addr;
+	u32 bits;
+} mcp_attn_ctl_regs[] = {
+	{ MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0,
+		MISC_AEU_ENABLE_MCP_PRTY_BITS },
+	{ MISC_REG_AEU_ENABLE4_NIG_0,
+		MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS },
+	{ MISC_REG_AEU_ENABLE4_PXP_0,
+		MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS },
+	{ MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0,
+		MISC_AEU_ENABLE_MCP_PRTY_BITS },
+	{ MISC_REG_AEU_ENABLE4_NIG_1,
+		MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS },
+	{ MISC_REG_AEU_ENABLE4_PXP_1,
+		MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS }
 };
 
 static inline void bnx2x_set_mcp_parity(struct bnx2x *bp, u8 enable)
@@ -665,14 +677,14 @@ static inline void bnx2x_set_mcp_parity(struct bnx2x *bp, u8 enable)
 	u32 reg_val;
 
 	for (i = 0; i < ARRAY_SIZE(mcp_attn_ctl_regs); i++) {
-		reg_val = REG_RD(bp, mcp_attn_ctl_regs[i]);
+		reg_val = REG_RD(bp, mcp_attn_ctl_regs[i].addr);
 
 		if (enable)
-			reg_val |= MISC_AEU_ENABLE_MCP_PRTY_BITS;
+			reg_val |= mcp_attn_ctl_regs[i].bits;
 		else
-			reg_val &= ~MISC_AEU_ENABLE_MCP_PRTY_BITS;
+			reg_val &= ~mcp_attn_ctl_regs[i].bits;
 
-		REG_WR(bp, mcp_attn_ctl_regs[i], reg_val);
+		REG_WR(bp, mcp_attn_ctl_regs[i].addr, reg_val);
 	}
 }
 

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c

@@ -470,10 +470,10 @@ static int bnx2x_vfop_qdtor_cmd(struct bnx2x *bp,
 				 bnx2x_vfop_qdtor, cmd->done);
 		return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_qdtor,
 					     cmd->block);
-	}
-	DP(BNX2X_MSG_IOV, "VF[%d] failed to add a vfop. rc %d\n",
-	   vf->abs_vfid, vfop->rc);
+	} else {
+		BNX2X_ERR("VF[%d] failed to add a vfop\n", vf->abs_vfid);
 		return -ENOMEM;
+	}
 }
 
 static void
@@ -3390,14 +3390,16 @@ int bnx2x_set_vf_mac(struct net_device *dev, int vfidx, u8 *mac)
 		rc = bnx2x_del_all_macs(bp, mac_obj, BNX2X_ETH_MAC, true);
 		if (rc) {
 			BNX2X_ERR("failed to delete eth macs\n");
-			return -EINVAL;
+			rc = -EINVAL;
+			goto out;
 		}
 
 		/* remove existing uc list macs */
 		rc = bnx2x_del_all_macs(bp, mac_obj, BNX2X_UC_LIST_MAC, true);
 		if (rc) {
 			BNX2X_ERR("failed to delete uc_list macs\n");
-			return -EINVAL;
+			rc = -EINVAL;
+			goto out;
 		}
 
 		/* configure the new mac to device */
@@ -3405,6 +3407,7 @@ int bnx2x_set_vf_mac(struct net_device *dev, int vfidx, u8 *mac)
 		bnx2x_set_mac_one(bp, (u8 *)&bulletin->mac, mac_obj, true,
 				  BNX2X_ETH_MAC, &ramrod_flags);
 
+out:
 		bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_MAC);
 	}
 
@@ -3467,7 +3470,8 @@ int bnx2x_set_vf_vlan(struct net_device *dev, int vfidx, u16 vlan, u8 qos)
 					  &ramrod_flags);
 		if (rc) {
 			BNX2X_ERR("failed to delete vlans\n");
-			return -EINVAL;
+			rc = -EINVAL;
+			goto out;
 		}
 
 		/* send queue update ramrod to configure default vlan and silent
@@ -3501,7 +3505,8 @@ int bnx2x_set_vf_vlan(struct net_device *dev, int vfidx, u16 vlan, u8 qos)
 			rc = bnx2x_config_vlan_mac(bp, &ramrod_param);
 			if (rc) {
 				BNX2X_ERR("failed to configure vlan\n");
-				return -EINVAL;
+				rc =  -EINVAL;
+				goto out;
 			}
 
 			/* configure default vlan to vf queue and set silent
@@ -3519,18 +3524,18 @@ int bnx2x_set_vf_vlan(struct net_device *dev, int vfidx, u16 vlan, u8 qos)
 		rc = bnx2x_queue_state_change(bp, &q_params);
 		if (rc) {
 			BNX2X_ERR("Failed to configure default VLAN\n");
-			return rc;
+			goto out;
 		}
 
 		/* clear the flag indicating that this VF needs its vlan
-		 * (will only be set if the HV configured th Vlan before vf was
-		 * and we were called because the VF came up later
+		 * (will only be set if the HV configured the Vlan before vf was
+		 * up and we were called because the VF came up later
 		 */
+out:
 		vf->cfg_flags &= ~VF_CFG_VLAN;
-
 		bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_VLAN);
 	}
-	return 0;
+	return rc;
 }
 
 /* crc is the first field in the bulletin board. Compute the crc over the

drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c

@@ -196,7 +196,7 @@ static void bnx2x_hw_stats_post(struct bnx2x *bp)
 
 	} else if (bp->func_stx) {
 		*stats_comp = 0;
-		bnx2x_post_dmae(bp, dmae, INIT_DMAE_C(bp));
+		bnx2x_issue_dmae_with_comp(bp, dmae, stats_comp);
 	}
 }
 

drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c

@@ -980,7 +980,7 @@ static int bnx2x_copy32_vf_dmae(struct bnx2x *bp, u8 from_vf,
 	dmae.len = len32;
 
 	/* issue the command and wait for completion */
-	return bnx2x_issue_dmae_with_comp(bp, &dmae);
+	return bnx2x_issue_dmae_with_comp(bp, &dmae, bnx2x_sp(bp, wb_comp));
 }
 
 static void bnx2x_vf_mbx_resp(struct bnx2x *bp, struct bnx2x_virtf *vf)