Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6

drivers/ide/ide-cd.c

@@ -3511,7 +3511,7 @@ static void __exit ide_cdrom_exit(void)
 	driver_unregister(&ide_cdrom_driver.gen_driver);
 }
 
-static int ide_cdrom_init(void)
+static int __init ide_cdrom_init(void)
 {
 	return driver_register(&ide_cdrom_driver.gen_driver);
 }

drivers/ide/ide-disk.c

@@ -1266,7 +1266,7 @@ static void __exit idedisk_exit (void)
 	driver_unregister(&idedisk_driver.gen_driver);
 }
 
-static int idedisk_init (void)
+static int __init idedisk_init(void)
 {
 	return driver_register(&idedisk_driver.gen_driver);
 }

drivers/ide/ide-floppy.c

@@ -2191,10 +2191,7 @@ static void __exit idefloppy_exit (void)
 	driver_unregister(&idefloppy_driver.gen_driver);
 }
 
-/*
- *	idefloppy_init will register the driver for each floppy.
- */
-static int idefloppy_init (void)
+static int __init idefloppy_init(void)
 {
 	printk("ide-floppy driver " IDEFLOPPY_VERSION "\n");
 	return driver_register(&idefloppy_driver.gen_driver);

drivers/ide/ide-io.c

@@ -1629,12 +1629,6 @@ EXPORT_SYMBOL(ide_init_drive_cmd);
  *	for the new rq to be completed.  This is VERY DANGEROUS, and is
  *	intended for careful use by the ATAPI tape/cdrom driver code.
  *
- *	If action is ide_next, then the rq is queued immediately after
- *	the currently-being-processed-request (if any), and the function
- *	returns without waiting for the new rq to be completed.  As above,
- *	This is VERY DANGEROUS, and is intended for careful use by the
- *	ATAPI tape/cdrom driver code.
- *
  *	If action is ide_end, then the rq is queued at the end of the
  *	request queue, and the function returns immediately without waiting
  *	for the new rq to be completed. This is again intended for careful

drivers/ide/ide-tape.c

@@ -4916,10 +4916,7 @@ static void __exit idetape_exit (void)
 	unregister_chrdev(IDETAPE_MAJOR, "ht");
 }
 
-/*
- *	idetape_init will register the driver for each tape.
- */
-static int idetape_init (void)
+static int __init idetape_init(void)
 {
 	int error = 1;
 	idetape_sysfs_class = class_create(THIS_MODULE, "ide_tape");

drivers/ide/ide-taskfile.c

@@ -51,8 +51,6 @@
 #include <asm/uaccess.h>
 #include <asm/io.h>
 
-#define DEBUG_TASKFILE	0	/* unset when fixed */
-
 static void ata_bswap_data (void *buffer, int wcount)
 {
 	u16 *p = buffer;
@@ -765,9 +763,6 @@ ide_startstop_t flagged_taskfile (ide_drive_t *drive, ide_task_t *task)
 	ide_hwif_t *hwif	= HWIF(drive);
 	task_struct_t *taskfile	= (task_struct_t *) task->tfRegister;
 	hob_struct_t *hobfile	= (hob_struct_t *) task->hobRegister;
-#if DEBUG_TASKFILE
-	u8 status;
-#endif
 
 	if (task->data_phase == TASKFILE_MULTI_IN ||
 	    task->data_phase == TASKFILE_MULTI_OUT) {
@@ -778,19 +773,13 @@ ide_startstop_t flagged_taskfile (ide_drive_t *drive, ide_task_t *task)
 	}
 
 	/*
-	 * (ks) Check taskfile in/out flags.
+	 * (ks) Check taskfile in flags.
 	 * If set, then execute as it is defined.
 	 * If not set, then define default settings.
 	 * The default values are:
-	 *	write and read all taskfile registers (except data) 
-	 *	write and read the hob registers (sector,nsector,lcyl,hcyl)
+	 *	read all taskfile registers (except data)
+	 *	read the hob registers (sector, nsector, lcyl, hcyl)
 	 */
-	if (task->tf_out_flags.all == 0) {
-		task->tf_out_flags.all = IDE_TASKFILE_STD_OUT_FLAGS;
-		if (drive->addressing == 1)
-			task->tf_out_flags.all |= (IDE_HOB_STD_OUT_FLAGS << 8);
-        }
-
 	if (task->tf_in_flags.all == 0) {
 		task->tf_in_flags.all = IDE_TASKFILE_STD_IN_FLAGS;
 		if (drive->addressing == 1)
@@ -803,16 +792,6 @@ ide_startstop_t flagged_taskfile (ide_drive_t *drive, ide_task_t *task)
 		hwif->OUTB(drive->ctl, IDE_CONTROL_REG);
 	SELECT_MASK(drive, 0);
 
-#if DEBUG_TASKFILE
-	status = hwif->INB(IDE_STATUS_REG);
-	if (status & 0x80) {
-		printk("flagged_taskfile -> Bad status. Status = %02x. wait 100 usec ...\n", status);
-		udelay(100);
-		status = hwif->INB(IDE_STATUS_REG);
-		printk("flagged_taskfile -> Status = %02x\n", status);
-	}
-#endif
-
 	if (task->tf_out_flags.b.data) {
 		u16 data =  taskfile->data + (hobfile->data << 8);
 		hwif->OUTW(data, IDE_DATA_REG);

drivers/ide/pci/sis5513.c

@@ -87,6 +87,7 @@ static const struct {
 	u8 chipset_family;
 	u8 flags;
 } SiSHostChipInfo[] = {
+	{ "SiS965",	PCI_DEVICE_ID_SI_965,	ATA_133  },
 	{ "SiS745",	PCI_DEVICE_ID_SI_745,	ATA_100  },
 	{ "SiS735",	PCI_DEVICE_ID_SI_735,	ATA_100  },
 	{ "SiS733",	PCI_DEVICE_ID_SI_733,	ATA_100  },

drivers/ide/pci/via82cxxx.c

@@ -79,6 +79,7 @@ static struct via_isa_bridge {
 	u8 rev_max;
 	u16 flags;
 } via_isa_bridges[] = {
+	{ "vt6410",	PCI_DEVICE_ID_VIA_6410,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8237",	PCI_DEVICE_ID_VIA_8237,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8235",	PCI_DEVICE_ID_VIA_8235,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8233a",	PCI_DEVICE_ID_VIA_8233A,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
@@ -467,24 +468,35 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif)
 	hwif->drives[1].autodma = hwif->autodma;
 }
 
-static ide_pci_device_t via82cxxx_chipset __devinitdata = {
+static ide_pci_device_t via82cxxx_chipsets[] __devinitdata = {
+	{	/* 0 */
 		.name		= "VP_IDE",
 		.init_chipset	= init_chipset_via82cxxx,
 		.init_hwif	= init_hwif_via82cxxx,
 		.channels	= 2,
 		.autodma	= NOAUTODMA,
 		.enablebits	= {{0x40,0x02,0x02}, {0x40,0x01,0x01}},
+		.bootable	= ON_BOARD
+	},{	/* 1 */
+		.name		= "VP_IDE",
+		.init_chipset	= init_chipset_via82cxxx,
+		.init_hwif	= init_hwif_via82cxxx,
+		.channels	= 2,
+		.autodma	= AUTODMA,
+		.enablebits	= {{0x00,0x00,0x00}, {0x00,0x00,0x00}},
 		.bootable	= ON_BOARD,
+	}
 };
 
 static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
-	return ide_setup_pci_device(dev, &via82cxxx_chipset);
+	return ide_setup_pci_device(dev, &via82cxxx_chipsets[id->driver_data]);
 }
 
 static struct pci_device_id via_pci_tbl[] = {
 	{ PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{ PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{ PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_6410,     PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, via_pci_tbl);

include/linux/hdreg.h

@@ -80,10 +80,12 @@
 /*
  * Define standard taskfile in/out register
  */
-#define IDE_TASKFILE_STD_OUT_FLAGS	0xFE
 #define IDE_TASKFILE_STD_IN_FLAGS	0xFE
-#define IDE_HOB_STD_OUT_FLAGS		0x3C
 #define IDE_HOB_STD_IN_FLAGS		0x3C
+#ifndef __KERNEL__
+#define IDE_TASKFILE_STD_OUT_FLAGS	0xFE
+#define IDE_HOB_STD_OUT_FLAGS		0x3C
+#endif
 
 typedef unsigned char task_ioreg_t;
 typedef unsigned long sata_ioreg_t;

include/linux/ide.h

@@ -1201,37 +1201,11 @@ extern u64 ide_get_error_location(ide_drive_t *, char *);
  */
 typedef enum {
 	ide_wait,	/* insert rq at end of list, and wait for it */
-	ide_next,	/* insert rq immediately after current request */
 	ide_preempt,	/* insert rq in front of current request */
 	ide_head_wait,	/* insert rq in front of current request and wait for it */
 	ide_end		/* insert rq at end of list, but don't wait for it */
 } ide_action_t;
 
-/*
- * This function issues a special IDE device request
- * onto the request queue.
- *
- * If action is ide_wait, then the rq is queued at the end of the
- * request queue, and the function sleeps until it has been processed.
- * This is for use when invoked from an ioctl handler.
- *
- * If action is ide_preempt, then the rq is queued at the head of
- * the request queue, displacing the currently-being-processed
- * request and this function returns immediately without waiting
- * for the new rq to be completed.  This is VERY DANGEROUS, and is
- * intended for careful use by the ATAPI tape/cdrom driver code.
- *
- * If action is ide_next, then the rq is queued immediately after
- * the currently-being-processed-request (if any), and the function
- * returns without waiting for the new rq to be completed.  As above,
- * This is VERY DANGEROUS, and is intended for careful use by the
- * ATAPI tape/cdrom driver code.
- *
- * If action is ide_end, then the rq is queued at the end of the
- * request queue, and the function returns immediately without waiting
- * for the new rq to be completed. This is again intended for careful
- * use by the ATAPI tape/cdrom driver code.
- */
 extern int ide_do_drive_cmd(ide_drive_t *, struct request *, ide_action_t);
 
 /*

include/linux/pci_ids.h

@@ -620,6 +620,7 @@
 #define PCI_DEVICE_ID_SI_961		0x0961
 #define PCI_DEVICE_ID_SI_962		0x0962
 #define PCI_DEVICE_ID_SI_963		0x0963
+#define PCI_DEVICE_ID_SI_965		0x0965
 #define PCI_DEVICE_ID_SI_5511		0x5511
 #define PCI_DEVICE_ID_SI_5513		0x5513
 #define PCI_DEVICE_ID_SI_5518		0x5518
@@ -1234,6 +1235,7 @@
 #define PCI_DEVICE_ID_VIA_8703_51_0	0x3148
 #define PCI_DEVICE_ID_VIA_8237_SATA	0x3149
 #define PCI_DEVICE_ID_VIA_XN266		0x3156
+#define PCI_DEVICE_ID_VIA_6410		0x3164
 #define PCI_DEVICE_ID_VIA_8754C_0	0x3168
 #define PCI_DEVICE_ID_VIA_8235		0x3177
 #define PCI_DEVICE_ID_VIA_8385_0	0x3188