Commit 452427b0 authored by Yuval Mintz's avatar Yuval Mintz Committed by David S. Miller

bnx2x: previous driver unload revised

The flow in which the bnx2x driver starts after a previous driver
has been terminated in an 'unclean' manner has several bugs and
FW risks, which makes it possible for the driver to fail after
boot-from-SAN or kdump.
This patch contains a revised flow which performs a safer
initialization, solving the possible crash scenarios.
Notice this patch contains lines with over 80 characters, as it
keeps print-strings in a single line.
Signed-off-by: default avatarYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: default avatarEilon Greenstein <eilong@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent a2daf263
......@@ -1173,6 +1173,13 @@ enum {
};
struct bnx2x_prev_path_list {
u8 bus;
u8 slot;
u8 path;
struct list_head list;
};
struct bnx2x {
/* Fields used in the tx and intr/napi performance paths
* are grouped together in the beginning of the structure
......
......@@ -1721,6 +1721,29 @@ static void bnx2x_squeeze_objects(struct bnx2x *bp)
} while (0)
#endif
bool bnx2x_test_firmware_version(struct bnx2x *bp, bool is_err)
{
/* build FW version dword */
u32 my_fw = (BCM_5710_FW_MAJOR_VERSION) +
(BCM_5710_FW_MINOR_VERSION << 8) +
(BCM_5710_FW_REVISION_VERSION << 16) +
(BCM_5710_FW_ENGINEERING_VERSION << 24);
/* read loaded FW from chip */
u32 loaded_fw = REG_RD(bp, XSEM_REG_PRAM);
DP(NETIF_MSG_IFUP, "loaded fw %x, my fw %x\n", loaded_fw, my_fw);
if (loaded_fw != my_fw) {
if (is_err)
BNX2X_ERR("bnx2x with FW %x was already loaded, which mismatches my %x FW. aborting\n",
loaded_fw, my_fw);
return false;
}
return true;
}
/* must be called with rtnl_lock */
int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
{
......@@ -1815,23 +1838,8 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
}
if (load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP &&
load_code != FW_MSG_CODE_DRV_LOAD_COMMON) {
/* build FW version dword */
u32 my_fw = (BCM_5710_FW_MAJOR_VERSION) +
(BCM_5710_FW_MINOR_VERSION << 8) +
(BCM_5710_FW_REVISION_VERSION << 16) +
(BCM_5710_FW_ENGINEERING_VERSION << 24);
/* read loaded FW from chip */
u32 loaded_fw = REG_RD(bp, XSEM_REG_PRAM);
DP(BNX2X_MSG_SP, "loaded fw %x, my fw %x",
loaded_fw, my_fw);
/* abort nic load if version mismatch */
if (my_fw != loaded_fw) {
BNX2X_ERR("bnx2x with FW %x already loaded, "
"which mismatches my %x FW. aborting",
loaded_fw, my_fw);
if (!bnx2x_test_firmware_version(bp, true)) {
rc = -EBUSY;
LOAD_ERROR_EXIT(bp, load_error2);
}
......
......@@ -431,6 +431,9 @@ void bnx2x_panic_dump(struct bnx2x *bp);
void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl);
/* validate currect fw is loaded */
bool bnx2x_test_firmware_version(struct bnx2x *bp, bool is_err);
/* dev_close main block */
int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode);
......
......@@ -1251,6 +1251,9 @@ struct drv_func_mb {
#define DRV_MSG_CODE_LINK_STATUS_CHANGED 0x01000000
#define DRV_MSG_CODE_INITIATE_FLR 0x02000000
#define REQ_BC_VER_4_INITIATE_FLR 0x00070213
#define BIOS_MSG_CODE_LIC_CHALLENGE 0xff010000
#define BIOS_MSG_CODE_LIC_RESPONSE 0xff020000
#define BIOS_MSG_CODE_VIRT_MAC_PRIM 0xff030000
......
......@@ -35,7 +35,6 @@
#define ETH_MAX_PACKET_SIZE 1500
#define ETH_MAX_JUMBO_PACKET_SIZE 9600
#define MDIO_ACCESS_TIMEOUT 1000
#define BMAC_CONTROL_RX_ENABLE 2
#define WC_LANE_MAX 4
#define I2C_SWITCH_WIDTH 2
#define I2C_BSC0 0
......
......@@ -89,6 +89,8 @@
#define PFC_BRB_FULL_LB_XON_THRESHOLD 250
#define MAXVAL(a, b) (((a) > (b)) ? (a) : (b))
#define BMAC_CONTROL_RX_ENABLE 2
/***********************************************************/
/* Structs */
/***********************************************************/
......
......@@ -52,6 +52,7 @@
#include <linux/prefetch.h>
#include <linux/zlib.h>
#include <linux/io.h>
#include <linux/semaphore.h>
#include <linux/stringify.h>
#include <linux/vmalloc.h>
......@@ -211,6 +212,10 @@ static DEFINE_PCI_DEVICE_TABLE(bnx2x_pci_tbl) = {
MODULE_DEVICE_TABLE(pci, bnx2x_pci_tbl);
/* Global resources for unloading a previously loaded device */
#define BNX2X_PREV_WAIT_NEEDED 1
static DEFINE_SEMAPHORE(bnx2x_prev_sem);
static LIST_HEAD(bnx2x_prev_list);
/****************************************************************************
* General service functions
****************************************************************************/
......@@ -8812,109 +8817,371 @@ static inline void bnx2x_undi_int_disable(struct bnx2x *bp)
bnx2x_undi_int_disable_e1h(bp);
}
static void __devinit bnx2x_undi_unload(struct bnx2x *bp)
static void __devinit bnx2x_prev_unload_close_mac(struct bnx2x *bp)
{
u32 val;
u32 val, base_addr, offset, mask, reset_reg;
bool mac_stopped = false;
u8 port = BP_PORT(bp);
/* possibly another driver is trying to reset the chip */
bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
reset_reg = REG_RD(bp, MISC_REG_RESET_REG_2);
/* check if doorbell queue is reset */
if (REG_RD(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET)
& MISC_REGISTERS_RESET_REG_1_RST_DORQ) {
if (!CHIP_IS_E3(bp)) {
val = REG_RD(bp, NIG_REG_BMAC0_REGS_OUT_EN + port * 4);
mask = MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port;
if ((mask & reset_reg) && val) {
u32 wb_data[2];
BNX2X_DEV_INFO("Disable bmac Rx\n");
base_addr = BP_PORT(bp) ? NIG_REG_INGRESS_BMAC1_MEM
: NIG_REG_INGRESS_BMAC0_MEM;
offset = CHIP_IS_E2(bp) ? BIGMAC2_REGISTER_BMAC_CONTROL
: BIGMAC_REGISTER_BMAC_CONTROL;
/*
* Check if it is the UNDI driver
/*
* use rd/wr since we cannot use dmae. This is safe
* since MCP won't access the bus due to the request
* to unload, and no function on the path can be
* loaded at this time.
*/
wb_data[0] = REG_RD(bp, base_addr + offset);
wb_data[1] = REG_RD(bp, base_addr + offset + 0x4);
wb_data[0] &= ~BMAC_CONTROL_RX_ENABLE;
REG_WR(bp, base_addr + offset, wb_data[0]);
REG_WR(bp, base_addr + offset + 0x4, wb_data[1]);
}
BNX2X_DEV_INFO("Disable emac Rx\n");
REG_WR(bp, NIG_REG_NIG_EMAC0_EN + BP_PORT(bp)*4, 0);
mac_stopped = true;
} else {
if (reset_reg & MISC_REGISTERS_RESET_REG_2_XMAC) {
BNX2X_DEV_INFO("Disable xmac Rx\n");
base_addr = BP_PORT(bp) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
val = REG_RD(bp, base_addr + XMAC_REG_PFC_CTRL_HI);
REG_WR(bp, base_addr + XMAC_REG_PFC_CTRL_HI,
val & ~(1 << 1));
REG_WR(bp, base_addr + XMAC_REG_PFC_CTRL_HI,
val | (1 << 1));
REG_WR(bp, base_addr + XMAC_REG_CTRL, 0);
mac_stopped = true;
}
mask = MISC_REGISTERS_RESET_REG_2_UMAC0 << port;
if (mask & reset_reg) {
BNX2X_DEV_INFO("Disable umac Rx\n");
base_addr = BP_PORT(bp) ? GRCBASE_UMAC1 : GRCBASE_UMAC0;
REG_WR(bp, base_addr + UMAC_REG_COMMAND_CONFIG, 0);
mac_stopped = true;
}
}
if (mac_stopped)
msleep(20);
}
#define BNX2X_PREV_UNDI_PROD_ADDR(p) (BAR_TSTRORM_INTMEM + 0x1508 + ((p) << 4))
#define BNX2X_PREV_UNDI_RCQ(val) ((val) & 0xffff)
#define BNX2X_PREV_UNDI_BD(val) ((val) >> 16 & 0xffff)
#define BNX2X_PREV_UNDI_PROD(rcq, bd) ((bd) << 16 | (rcq))
static void __devinit bnx2x_prev_unload_undi_inc(struct bnx2x *bp, u8 port,
u8 inc)
{
u16 rcq, bd;
u32 tmp_reg = REG_RD(bp, BNX2X_PREV_UNDI_PROD_ADDR(port));
rcq = BNX2X_PREV_UNDI_RCQ(tmp_reg) + inc;
bd = BNX2X_PREV_UNDI_BD(tmp_reg) + inc;
tmp_reg = BNX2X_PREV_UNDI_PROD(rcq, bd);
REG_WR(bp, BNX2X_PREV_UNDI_PROD_ADDR(port), tmp_reg);
BNX2X_DEV_INFO("UNDI producer [%d] rings bd -> 0x%04x, rcq -> 0x%04x\n",
port, bd, rcq);
}
static int __devinit bnx2x_prev_mcp_done(struct bnx2x *bp)
{
u32 rc = bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0);
if (!rc) {
BNX2X_ERR("MCP response failure, aborting\n");
return -EBUSY;
}
return 0;
}
static bool __devinit bnx2x_prev_is_path_marked(struct bnx2x *bp)
{
struct bnx2x_prev_path_list *tmp_list;
int rc = false;
if (down_trylock(&bnx2x_prev_sem))
return false;
list_for_each_entry(tmp_list, &bnx2x_prev_list, list) {
if (PCI_SLOT(bp->pdev->devfn) == tmp_list->slot &&
bp->pdev->bus->number == tmp_list->bus &&
BP_PATH(bp) == tmp_list->path) {
rc = true;
BNX2X_DEV_INFO("Path %d was already cleaned from previous drivers\n",
BP_PATH(bp));
break;
}
}
up(&bnx2x_prev_sem);
return rc;
}
static int __devinit bnx2x_prev_mark_path(struct bnx2x *bp)
{
struct bnx2x_prev_path_list *tmp_list;
int rc;
tmp_list = (struct bnx2x_prev_path_list *)
kmalloc(sizeof(struct bnx2x_prev_path_list), GFP_KERNEL);
if (!tmp_list) {
BNX2X_ERR("Failed to allocate 'bnx2x_prev_path_list'\n");
return -ENOMEM;
}
tmp_list->bus = bp->pdev->bus->number;
tmp_list->slot = PCI_SLOT(bp->pdev->devfn);
tmp_list->path = BP_PATH(bp);
rc = down_interruptible(&bnx2x_prev_sem);
if (rc) {
BNX2X_ERR("Received %d when tried to take lock\n", rc);
kfree(tmp_list);
} else {
BNX2X_DEV_INFO("Marked path [%d] - finished previous unload\n",
BP_PATH(bp));
list_add(&tmp_list->list, &bnx2x_prev_list);
up(&bnx2x_prev_sem);
}
return rc;
}
static bool __devinit bnx2x_can_flr(struct bnx2x *bp)
{
int pos;
u32 cap;
struct pci_dev *dev = bp->pdev;
pos = pci_pcie_cap(dev);
if (!pos)
return false;
pci_read_config_dword(dev, pos + PCI_EXP_DEVCAP, &cap);
if (!(cap & PCI_EXP_DEVCAP_FLR))
return false;
return true;
}
static int __devinit bnx2x_do_flr(struct bnx2x *bp)
{
int i, pos;
u16 status;
struct pci_dev *dev = bp->pdev;
/* probe the capability first */
if (bnx2x_can_flr(bp))
return -ENOTTY;
pos = pci_pcie_cap(dev);
if (!pos)
return -ENOTTY;
/* Wait for Transaction Pending bit clean */
for (i = 0; i < 4; i++) {
if (i)
msleep((1 << (i - 1)) * 100);
pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &status);
if (!(status & PCI_EXP_DEVSTA_TRPND))
goto clear;
}
dev_err(&dev->dev,
"transaction is not cleared; proceeding with reset anyway\n");
clear:
if (bp->common.bc_ver < REQ_BC_VER_4_INITIATE_FLR) {
BNX2X_ERR("FLR not supported by BC_VER: 0x%x\n",
bp->common.bc_ver);
return -EINVAL;
}
bnx2x_fw_command(bp, DRV_MSG_CODE_INITIATE_FLR, 0);
return 0;
}
static int __devinit bnx2x_prev_unload_uncommon(struct bnx2x *bp)
{
int rc;
BNX2X_DEV_INFO("Uncommon unload Flow\n");
/* Test if previous unload process was already finished for this path */
if (bnx2x_prev_is_path_marked(bp))
return bnx2x_prev_mcp_done(bp);
/* If function has FLR capabilities, and existing FW version matches
* the one required, then FLR will be sufficient to clean any residue
* left by previous driver
*/
if (bnx2x_test_firmware_version(bp, false) && bnx2x_can_flr(bp))
return bnx2x_do_flr(bp);
/* Close the MCP request, return failure*/
rc = bnx2x_prev_mcp_done(bp);
if (!rc)
rc = BNX2X_PREV_WAIT_NEEDED;
return rc;
}
static int __devinit bnx2x_prev_unload_common(struct bnx2x *bp)
{
u32 reset_reg, tmp_reg = 0, rc;
/* It is possible a previous function received 'common' answer,
* but hasn't loaded yet, therefore creating a scenario of
* multiple functions receiving 'common' on the same path.
*/
BNX2X_DEV_INFO("Common unload Flow\n");
if (bnx2x_prev_is_path_marked(bp))
return bnx2x_prev_mcp_done(bp);
reset_reg = REG_RD(bp, MISC_REG_RESET_REG_1);
/* Reset should be performed after BRB is emptied */
if (reset_reg & MISC_REGISTERS_RESET_REG_1_RST_BRB1) {
u32 timer_count = 1000;
bool prev_undi = false;
/* Close the MAC Rx to prevent BRB from filling up */
bnx2x_prev_unload_close_mac(bp);
/* Check if the UNDI driver was previously loaded
* UNDI driver initializes CID offset for normal bell to 0x7
*/
val = REG_RD(bp, DORQ_REG_NORM_CID_OFST);
if (val == 0x7) {
u32 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
/* save our pf_num */
int orig_pf_num = bp->pf_num;
int port;
u32 swap_en, swap_val, value;
/* clear the UNDI indication */
REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0);
BNX2X_DEV_INFO("UNDI is active! reset device\n");
/* try unload UNDI on port 0 */
bp->pf_num = 0;
bp->fw_seq =
(SHMEM_RD(bp, func_mb[bp->pf_num].drv_mb_header) &
DRV_MSG_SEQ_NUMBER_MASK);
reset_code = bnx2x_fw_command(bp, reset_code, 0);
/* if UNDI is loaded on the other port */
if (reset_code != FW_MSG_CODE_DRV_UNLOAD_COMMON) {
/* send "DONE" for previous unload */
bnx2x_fw_command(bp,
DRV_MSG_CODE_UNLOAD_DONE, 0);
/* unload UNDI on port 1 */
bp->pf_num = 1;
bp->fw_seq =
(SHMEM_RD(bp, func_mb[bp->pf_num].drv_mb_header) &
DRV_MSG_SEQ_NUMBER_MASK);
reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
bnx2x_fw_command(bp, reset_code, 0);
reset_reg = REG_RD(bp, MISC_REG_RESET_REG_1);
if (reset_reg & MISC_REGISTERS_RESET_REG_1_RST_DORQ) {
tmp_reg = REG_RD(bp, DORQ_REG_NORM_CID_OFST);
if (tmp_reg == 0x7) {
BNX2X_DEV_INFO("UNDI previously loaded\n");
prev_undi = true;
/* clear the UNDI indication */
REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0);
}
}
/* wait until BRB is empty */
tmp_reg = REG_RD(bp, BRB1_REG_NUM_OF_FULL_BLOCKS);
while (timer_count) {
u32 prev_brb = tmp_reg;
bnx2x_undi_int_disable(bp);
port = BP_PORT(bp);
/* close input traffic and wait for it */
/* Do not rcv packets to BRB */
REG_WR(bp, (port ? NIG_REG_LLH1_BRB1_DRV_MASK :
NIG_REG_LLH0_BRB1_DRV_MASK), 0x0);
/* Do not direct rcv packets that are not for MCP to
* the BRB */
REG_WR(bp, (port ? NIG_REG_LLH1_BRB1_NOT_MCP :
NIG_REG_LLH0_BRB1_NOT_MCP), 0x0);
/* clear AEU */
REG_WR(bp, (port ? MISC_REG_AEU_MASK_ATTN_FUNC_1 :
MISC_REG_AEU_MASK_ATTN_FUNC_0), 0);
msleep(10);
/* save NIG port swap info */
swap_val = REG_RD(bp, NIG_REG_PORT_SWAP);
swap_en = REG_RD(bp, NIG_REG_STRAP_OVERRIDE);
/* reset device */
REG_WR(bp,
GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR,
0xd3ffffff);
value = 0x1400;
if (CHIP_IS_E3(bp)) {
value |= MISC_REGISTERS_RESET_REG_2_MSTAT0;
value |= MISC_REGISTERS_RESET_REG_2_MSTAT1;
}
tmp_reg = REG_RD(bp, BRB1_REG_NUM_OF_FULL_BLOCKS);
if (!tmp_reg)
break;
REG_WR(bp,
GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
value);
BNX2X_DEV_INFO("BRB still has 0x%08x\n", tmp_reg);
/* take the NIG out of reset and restore swap values */
REG_WR(bp,
GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET,
MISC_REGISTERS_RESET_REG_1_RST_NIG);
REG_WR(bp, NIG_REG_PORT_SWAP, swap_val);
REG_WR(bp, NIG_REG_STRAP_OVERRIDE, swap_en);
/* reset timer as long as BRB actually gets emptied */
if (prev_brb > tmp_reg)
timer_count = 1000;
else
timer_count--;
/* send unload done to the MCP */
bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0);
/* If UNDI resides in memory, manually increment it */
if (prev_undi)
bnx2x_prev_unload_undi_inc(bp, BP_PORT(bp), 1);
/* restore our func and fw_seq */
bp->pf_num = orig_pf_num;
udelay(10);
}
if (!timer_count)
BNX2X_ERR("Failed to empty BRB, hope for the best\n");
}
/* now it's safe to release the lock */
bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
/* No packets are in the pipeline, path is ready for reset */
bnx2x_reset_common(bp);
rc = bnx2x_prev_mark_path(bp);
if (rc) {
bnx2x_prev_mcp_done(bp);
return rc;
}
return bnx2x_prev_mcp_done(bp);
}
static int __devinit bnx2x_prev_unload(struct bnx2x *bp)
{
int time_counter = 10;
u32 rc, fw, hw_lock_reg, hw_lock_val;
BNX2X_DEV_INFO("Entering Previous Unload Flow\n");
/* Release previously held locks */
hw_lock_reg = (BP_FUNC(bp) <= 5) ?
(MISC_REG_DRIVER_CONTROL_1 + BP_FUNC(bp) * 8) :
(MISC_REG_DRIVER_CONTROL_7 + (BP_FUNC(bp) - 6) * 8);
hw_lock_val = (REG_RD(bp, hw_lock_reg));
if (hw_lock_val) {
if (hw_lock_val & HW_LOCK_RESOURCE_NVRAM) {
BNX2X_DEV_INFO("Release Previously held NVRAM lock\n");
REG_WR(bp, MCP_REG_MCPR_NVM_SW_ARB,
(MCPR_NVM_SW_ARB_ARB_REQ_CLR1 << BP_PORT(bp)));
}
BNX2X_DEV_INFO("Release Previously held hw lock\n");
REG_WR(bp, hw_lock_reg, 0xffffffff);
} else
BNX2X_DEV_INFO("No need to release hw/nvram locks\n");
if (MCPR_ACCESS_LOCK_LOCK & REG_RD(bp, MCP_REG_MCPR_ACCESS_LOCK)) {
BNX2X_DEV_INFO("Release previously held alr\n");
REG_WR(bp, MCP_REG_MCPR_ACCESS_LOCK, 0);
}
do {
/* Lock MCP using an unload request */
fw = bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS, 0);
if (!fw) {
BNX2X_ERR("MCP response failure, aborting\n");
rc = -EBUSY;
break;
}
if (fw == FW_MSG_CODE_DRV_UNLOAD_COMMON) {
rc = bnx2x_prev_unload_common(bp);
break;
}
/* non-common reply from MCP night require looping */
rc = bnx2x_prev_unload_uncommon(bp);
if (rc != BNX2X_PREV_WAIT_NEEDED)
break;
msleep(20);
} while (--time_counter);
if (!time_counter || rc) {
BNX2X_ERR("Failed unloading previous driver, aborting\n");
rc = -EBUSY;
}
BNX2X_DEV_INFO("Finished Previous Unload Flow [%d]\n", rc);
return rc;
}
static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp)
......@@ -10100,8 +10367,16 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
func = BP_FUNC(bp);
/* need to reset chip if undi was active */
if (!BP_NOMCP(bp))
bnx2x_undi_unload(bp);
if (!BP_NOMCP(bp)) {
/* init fw_seq */
bp->fw_seq =
SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) &
DRV_MSG_SEQ_NUMBER_MASK;
BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq);
bnx2x_prev_unload(bp);
}
if (CHIP_REV_IS_FPGA(bp))
dev_err(&bp->pdev->dev, "FPGA detected\n");
......@@ -11431,9 +11706,18 @@ static int __init bnx2x_init(void)
static void __exit bnx2x_cleanup(void)
{
struct list_head *pos, *q;
pci_unregister_driver(&bnx2x_pci_driver);
destroy_workqueue(bnx2x_wq);
/* Free globablly allocated resources */
list_for_each_safe(pos, q, &bnx2x_prev_list) {
struct bnx2x_prev_path_list *tmp =
list_entry(pos, struct bnx2x_prev_path_list, list);
list_del(pos);
kfree(tmp);
}
}
void bnx2x_notify_link_changed(struct bnx2x *bp)
......
......@@ -987,6 +987,7 @@
* clear; 1 = set. Data valid only in addresses 0-4. all the rest are zero. */
#define IGU_REG_WRITE_DONE_PENDING 0x130480
#define MCP_A_REG_MCPR_SCRATCH 0x3a0000
#define MCP_REG_MCPR_ACCESS_LOCK 0x8009c
#define MCP_REG_MCPR_CPU_PROGRAM_COUNTER 0x8501c
#define MCP_REG_MCPR_GP_INPUTS 0x800c0
#define MCP_REG_MCPR_GP_OENABLE 0x800c8
......@@ -1686,6 +1687,7 @@
[10] rst_dbg; [11] rst_misc_core; [12] rst_dbue (UART); [13]
Pci_resetmdio_n; [14] rst_emac0_hard_core; [15] rst_emac1_hard_core; 16]
rst_pxp_rq_rd_wr; 31:17] reserved */
#define MISC_REG_RESET_REG_1 0xa580
#define MISC_REG_RESET_REG_2 0xa590
/* [RW 20] 20 bit GRC address where the scratch-pad of the MCP that is
shared with the driver resides */
......@@ -5606,6 +5608,7 @@
/* [RC 32] Parity register #0 read clear */
#define XSEM_REG_XSEM_PRTY_STS_CLR_0 0x280128
#define XSEM_REG_XSEM_PRTY_STS_CLR_1 0x280138
#define MCPR_ACCESS_LOCK_LOCK (1L<<31)
#define MCPR_NVM_ACCESS_ENABLE_EN (1L<<0)
#define MCPR_NVM_ACCESS_ENABLE_WR_EN (1L<<1)
#define MCPR_NVM_ADDR_NVM_ADDR_VALUE (0xffffffL<<0)
......@@ -5732,6 +5735,7 @@
#define MISC_REGISTERS_GPIO_PORT_SHIFT 4
#define MISC_REGISTERS_GPIO_SET_POS 8
#define MISC_REGISTERS_RESET_REG_1_CLEAR 0x588
#define MISC_REGISTERS_RESET_REG_1_RST_BRB1 (0x1<<0)
#define MISC_REGISTERS_RESET_REG_1_RST_DORQ (0x1<<19)
#define MISC_REGISTERS_RESET_REG_1_RST_HC (0x1<<29)
#define MISC_REGISTERS_RESET_REG_1_RST_NIG (0x1<<7)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment