Commit 453823ba authored by Corey Minyard's avatar Corey Minyard Committed by Linus Torvalds

[PATCH] IPMI: fix startup race condition

Matt Domsch noticed a startup race with the IPMI kernel thread, it was
possible (though extraordinarly unlikely) that a message could come in
before the upper layer was ready to handle it.  This patch splits the
startup processing of an IPMI interface into two parts, one to get ready
and one to actually start the processes to receive messages from the
interface.

[akpm@osdl.org: cleanups]
Signed-off-by: default avatarCorey Minyard <minyard@acm.org>
Cc: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent ee37df78
......@@ -2305,8 +2305,7 @@ int ipmi_register_smi(struct ipmi_smi_handlers *handlers,
void *send_info,
struct ipmi_device_id *device_id,
struct device *si_dev,
unsigned char slave_addr,
ipmi_smi_t *new_intf)
unsigned char slave_addr)
{
int i, j;
int rv;
......@@ -2388,9 +2387,9 @@ int ipmi_register_smi(struct ipmi_smi_handlers *handlers,
if (rv)
goto out;
/* FIXME - this is an ugly kludge, this sets the intf for the
caller before sending any messages with it. */
*new_intf = intf;
rv = handlers->start_processing(send_info, intf);
if (rv)
goto out;
get_guid(intf);
......
......@@ -972,10 +972,37 @@ static irqreturn_t si_bt_irq_handler(int irq, void *data, struct pt_regs *regs)
return si_irq_handler(irq, data, regs);
}
static int smi_start_processing(void *send_info,
ipmi_smi_t intf)
{
struct smi_info *new_smi = send_info;
new_smi->intf = intf;
/* Set up the timer that drives the interface. */
setup_timer(&new_smi->si_timer, smi_timeout, (long)new_smi);
new_smi->last_timeout_jiffies = jiffies;
mod_timer(&new_smi->si_timer, jiffies + SI_TIMEOUT_JIFFIES);
if (new_smi->si_type != SI_BT) {
new_smi->thread = kthread_run(ipmi_thread, new_smi,
"kipmi%d", new_smi->intf_num);
if (IS_ERR(new_smi->thread)) {
printk(KERN_NOTICE "ipmi_si_intf: Could not start"
" kernel thread due to error %ld, only using"
" timers to drive the interface\n",
PTR_ERR(new_smi->thread));
new_smi->thread = NULL;
}
}
return 0;
}
static struct ipmi_smi_handlers handlers =
{
.owner = THIS_MODULE,
.start_processing = smi_start_processing,
.sender = sender,
.request_events = request_events,
.set_run_to_completion = set_run_to_completion,
......@@ -2162,9 +2189,13 @@ static void setup_xaction_handlers(struct smi_info *smi_info)
static inline void wait_for_timer_and_thread(struct smi_info *smi_info)
{
if (smi_info->thread != NULL && smi_info->thread != ERR_PTR(-ENOMEM))
if (smi_info->intf) {
/* The timer and thread are only running if the
interface has been started up and registered. */
if (smi_info->thread != NULL)
kthread_stop(smi_info->thread);
del_timer_sync(&smi_info->si_timer);
}
}
static struct ipmi_default_vals
......@@ -2341,21 +2372,6 @@ static int try_smi_init(struct smi_info *new_smi)
if (new_smi->irq)
new_smi->si_state = SI_CLEARING_FLAGS_THEN_SET_IRQ;
/* The ipmi_register_smi() code does some operations to
determine the channel information, so we must be ready to
handle operations before it is called. This means we have
to stop the timer if we get an error after this point. */
init_timer(&(new_smi->si_timer));
new_smi->si_timer.data = (long) new_smi;
new_smi->si_timer.function = smi_timeout;
new_smi->last_timeout_jiffies = jiffies;
new_smi->si_timer.expires = jiffies + SI_TIMEOUT_JIFFIES;
add_timer(&(new_smi->si_timer));
if (new_smi->si_type != SI_BT)
new_smi->thread = kthread_run(ipmi_thread, new_smi,
"kipmi%d", new_smi->intf_num);
if (!new_smi->dev) {
/* If we don't already have a device from something
* else (like PCI), then register a new one. */
......@@ -2365,7 +2381,7 @@ static int try_smi_init(struct smi_info *new_smi)
printk(KERN_ERR
"ipmi_si_intf:"
" Unable to allocate platform device\n");
goto out_err_stop_timer;
goto out_err;
}
new_smi->dev = &new_smi->pdev->dev;
new_smi->dev->driver = &ipmi_driver;
......@@ -2377,7 +2393,7 @@ static int try_smi_init(struct smi_info *new_smi)
" Unable to register system interface device:"
" %d\n",
rv);
goto out_err_stop_timer;
goto out_err;
}
new_smi->dev_registered = 1;
}
......@@ -2386,8 +2402,7 @@ static int try_smi_init(struct smi_info *new_smi)
new_smi,
&new_smi->device_id,
new_smi->dev,
new_smi->slave_addr,
&(new_smi->intf));
new_smi->slave_addr);
if (rv) {
printk(KERN_ERR
"ipmi_si: Unable to register device: error %d\n",
......
......@@ -82,6 +82,13 @@ struct ipmi_smi_handlers
{
struct module *owner;
/* The low-level interface cannot start sending messages to
the upper layer until this function is called. This may
not be NULL, the lower layer must take the interface from
this call. */
int (*start_processing)(void *send_info,
ipmi_smi_t new_intf);
/* Called to enqueue an SMI message to be sent. This
operation is not allowed to fail. If an error occurs, it
should report back the error in a received message. It may
......@@ -157,13 +164,16 @@ static inline void ipmi_demangle_device_id(unsigned char *data,
}
/* Add a low-level interface to the IPMI driver. Note that if the
interface doesn't know its slave address, it should pass in zero. */
interface doesn't know its slave address, it should pass in zero.
The low-level interface should not deliver any messages to the
upper layer until the start_processing() function in the handlers
is called, and the lower layer must get the interface from that
call. */
int ipmi_register_smi(struct ipmi_smi_handlers *handlers,
void *send_info,
struct ipmi_device_id *device_id,
struct device *dev,
unsigned char slave_addr,
ipmi_smi_t *intf);
unsigned char slave_addr);
/*
* Remove a low-level interface from the IPMI driver. This will
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment