[media] v4l: Add Renesas R-Car FDP1 Driver

The FDP1 driver performs advanced de-interlacing on a memory 2 memory
based video stream, and supports conversion from YCbCr/YUV
to RGB pixel formats
Signed-off-by: Kieran Bingham <kieran+renesas@bingham.xyz>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Documentation/media/v4l-drivers/index.rst

@@ -48,6 +48,7 @@ For more details see the file COPYING in the source distribution of Linux.
 	pvrusb2
 	pxa_camera
 	radiotrack
+	rcar-fdp1
 	saa7134
 	sh_mobile_ceu_camera
 	si470x

Documentation/media/v4l-drivers/rcar-fdp1.rst

+Renesas R-Car Fine Display Processor (FDP1) Driver
+==================================================
+
+The R-Car FDP1 driver implements driver-specific controls as follows.
+
+``V4L2_CID_DEINTERLACING_MODE (menu)``
+    The video deinterlacing mode (such as Bob, Weave, ...). The R-Car FDP1
+    driver implements the following modes.
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 4
+
+    * - ``"Progressive" (0)``
+      - The input image video stream is progressive (not interlaced). No
+        deinterlacing is performed. Apart from (optional) format and encoding
+        conversion output frames are identical to the input frames.
+    * - ``"Adaptive 2D/3D" (1)``
+      - Motion adaptive version of 2D and 3D deinterlacing. Use 3D deinterlacing
+        in the presence of fast motion and 2D deinterlacing with diagonal
+        interpolation otherwise.
+    * - ``"Fixed 2D" (2)``
+      - The current field is scaled vertically by averaging adjacent lines to
+        recover missing lines. This method is also known as blending or Line
+        Averaging (LAV).
+    * - ``"Fixed 3D" (3)``
+      - The previous and next fields are averaged to recover lines missing from
+        the current field. This method is also known as Field Averaging (FAV).
+    * - ``"Previous field" (4)``
+      - The current field is weaved with the previous field, i.e. the previous
+        field is used to fill missing lines from the current field. This method
+        is also known as weave deinterlacing.
+    * - ``"Next field" (5)``
+      - The current field is weaved with the next field, i.e. the next field is
+        used to fill missing lines from the current field. This method is also
+        known as weave deinterlacing.

MAINTAINERS

@@ -7712,6 +7712,15 @@ F:	Documentation/devicetree/bindings/media/renesas,fcp.txt
 F:	drivers/media/platform/rcar-fcp.c
 F:	include/media/rcar-fcp.h
 
+MEDIA DRIVERS FOR RENESAS - FDP1
+M:	Kieran Bingham <kieran@bingham.xyz>
+L:	linux-media@vger.kernel.org
+L:	linux-renesas-soc@vger.kernel.org
+T:	git git://linuxtv.org/media_tree.git
+S:	Supported
+F:	Documentation/devicetree/bindings/media/renesas,fdp1.txt
+F:	drivers/media/platform/rcar_fdp1.c
+
 MEDIA DRIVERS FOR RENESAS - VIN
 M:	Niklas Söderlund <niklas.soderlund@ragnatech.se>
 L:	linux-media@vger.kernel.org

drivers/media/platform/Kconfig

@@ -307,6 +307,19 @@ config VIDEO_SH_VEU
 	    Support for the Video Engine Unit (VEU) on SuperH and
 	    SH-Mobile SoCs.
 
+config VIDEO_RENESAS_FDP1
+	tristate "Renesas Fine Display Processor"
+	depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA
+	depends on ARCH_SHMOBILE || COMPILE_TEST
+	select VIDEOBUF2_DMA_CONTIG
+	select V4L2_MEM2MEM_DEV
+	---help---
+	  This is a V4L2 driver for the Renesas Fine Display Processor
+	  providing colour space conversion, and de-interlacing features.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called rcar_fdp1.
+
 config VIDEO_RENESAS_JPU
 	tristate "Renesas JPEG Processing Unit"
 	depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA

drivers/media/platform/Makefile

@@ -48,6 +48,7 @@ obj-$(CONFIG_VIDEO_SH_VOU)		+= sh_vou.o
 obj-$(CONFIG_SOC_CAMERA)		+= soc_camera/
 
 obj-$(CONFIG_VIDEO_RENESAS_FCP) 	+= rcar-fcp.o
+obj-$(CONFIG_VIDEO_RENESAS_FDP1)	+= rcar_fdp1.o
 obj-$(CONFIG_VIDEO_RENESAS_JPU) 	+= rcar_jpu.o
 obj-$(CONFIG_VIDEO_RENESAS_VSP1)	+= vsp1/