Merge branch 'next' into for-linus

Prepare second round of updates for 4.1 merge window.

Documentation/input/alps.txt

@@ -94,6 +94,10 @@ PS/2 packet format
 
 Note that the device never signals overflow condition.
 
+For protocol version 2 devices when the trackpoint is used, and no fingers
+are on the touchpad, the M R L bits signal the combined status of both the
+pointingstick and touchpad buttons.
+
 ALPS Absolute Mode - Protocol Version 1
 --------------------------------------
 
@@ -107,7 +111,7 @@ ALPS Absolute Mode - Protocol Version 1
 ALPS Absolute Mode - Protocol Version 2
 ---------------------------------------
 
- byte 0:  1    ?    ?    ?    1    ?    ?    ?
+ byte 0:  1    ?    ?    ?    1  PSM  PSR  PSL
  byte 1:  0   x6   x5   x4   x3   x2   x1   x0
  byte 2:  0  x10   x9   x8   x7    ?  fin  ges
  byte 3:  0   y9   y8   y7    1    M    R    L
@@ -115,7 +119,8 @@ ALPS Absolute Mode - Protocol Version 2
  byte 5:  0   z6   z5   z4   z3   z2   z1   z0
 
 Protocol Version 2 DualPoint devices send standard PS/2 mouse packets for
-the DualPoint Stick.
+the DualPoint Stick. For non interleaved dualpoint devices the pointingstick
+buttons get reported separately in the PSM, PSR and PSL bits.
 
 Dualpoint device -- interleaved packet format
 ---------------------------------------------

MAINTAINERS

@@ -10530,6 +10530,14 @@ L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	drivers/misc/vmw_balloon.c
 
+VMWARE VMMOUSE SUBDRIVER
+M:	"VMware Graphics" <linux-graphics-maintainer@vmware.com>
+M:	"VMware, Inc." <pv-drivers@vmware.com>
+L:	linux-input@vger.kernel.org
+S:	Maintained
+F:	drivers/input/mouse/vmmouse.c
+F:	drivers/input/mouse/vmmouse.h
+
 VMWARE VMXNET3 ETHERNET DRIVER
 M:	Shreyas Bhatewara <sbhatewara@vmware.com>
 M:	"VMware, Inc." <pv-drivers@vmware.com>

drivers/input/ff-core.c

@@ -23,8 +23,6 @@
 
 /* #define DEBUG */
 
-#define pr_fmt(fmt) KBUILD_BASENAME ": " fmt
-
 #include <linux/input.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
@@ -116,7 +114,7 @@ int input_ff_upload(struct input_dev *dev, struct ff_effect *effect,
 
 	if (effect->type < FF_EFFECT_MIN || effect->type > FF_EFFECT_MAX ||
 	    !test_bit(effect->type, dev->ffbit)) {
-		pr_debug("invalid or not supported effect type in upload\n");
+		dev_dbg(&dev->dev, "invalid or not supported effect type in upload\n");
 		return -EINVAL;
 	}
 
@@ -124,7 +122,7 @@ int input_ff_upload(struct input_dev *dev, struct ff_effect *effect,
 	    (effect->u.periodic.waveform < FF_WAVEFORM_MIN ||
 	     effect->u.periodic.waveform > FF_WAVEFORM_MAX ||
 	     !test_bit(effect->u.periodic.waveform, dev->ffbit))) {
-		pr_debug("invalid or not supported wave form in upload\n");
+		dev_dbg(&dev->dev, "invalid or not supported wave form in upload\n");
 		return -EINVAL;
 	}
 
@@ -246,7 +244,7 @@ static int flush_effects(struct input_dev *dev, struct file *file)
 	struct ff_device *ff = dev->ff;
 	int i;
 
-	pr_debug("flushing now\n");
+	dev_dbg(&dev->dev, "flushing now\n");
 
 	mutex_lock(&ff->mutex);
 
@@ -316,7 +314,7 @@ int input_ff_create(struct input_dev *dev, unsigned int max_effects)
 	int i;
 
 	if (!max_effects) {
-		pr_err("cannot allocate device without any effects\n");
+		dev_err(&dev->dev, "cannot allocate device without any effects\n");
 		return -EINVAL;
 	}
 

drivers/input/joystick/xpad.c

@@ -31,12 +31,14 @@
  *  - the iForce driver    drivers/char/joystick/iforce.c
  *  - the skeleton-driver  drivers/usb/usb-skeleton.c
  *  - Xbox 360 information http://www.free60.org/wiki/Gamepad
+ *  - Xbox One information https://github.com/quantus/xbox-one-controller-protocol
  *
  * Thanks to:
  *  - ITO Takayuki for providing essential xpad information on his website
  *  - Vojtech Pavlik     - iforce driver / input subsystem
  *  - Greg Kroah-Hartman - usb-skeleton driver
  *  - XBOX Linux project - extra USB id's
+ *  - Pekka Pöyry (quantus) - Xbox One controller reverse engineering
  *
  * TODO:
  *  - fine tune axes (especially trigger axes)
@@ -828,6 +830,23 @@ static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect
 
 			return usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
 
+		case XTYPE_XBOXONE:
+			xpad->odata[0] = 0x09; /* activate rumble */
+			xpad->odata[1] = 0x08;
+			xpad->odata[2] = 0x00;
+			xpad->odata[3] = 0x08; /* continuous effect */
+			xpad->odata[4] = 0x00; /* simple rumble mode */
+			xpad->odata[5] = 0x03; /* L and R actuator only */
+			xpad->odata[6] = 0x00; /* TODO: LT actuator */
+			xpad->odata[7] = 0x00; /* TODO: RT actuator */
+			xpad->odata[8] = strong / 256;	/* left actuator */
+			xpad->odata[9] = weak / 256;	/* right actuator */
+			xpad->odata[10] = 0x80;	/* length of pulse */
+			xpad->odata[11] = 0x00;	/* stop period of pulse */
+			xpad->irq_out->transfer_buffer_length = 12;
+
+			return usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
+
 		default:
 			dev_dbg(&xpad->dev->dev,
 				"%s - rumble command sent to unsupported xpad type: %d\n",
@@ -841,7 +860,7 @@ static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect
 
 static int xpad_init_ff(struct usb_xpad *xpad)
 {
-	if (xpad->xtype == XTYPE_UNKNOWN || xpad->xtype == XTYPE_XBOXONE)
+	if (xpad->xtype == XTYPE_UNKNOWN)
 		return 0;
 
 	input_set_capability(xpad->dev, EV_FF, FF_RUMBLE);

drivers/input/keyboard/lm8333.c

 /*
  * LM8333 keypad driver
- * Copyright (C) 2012 Wolfram Sang, Pengutronix <w.sang@pengutronix.de>
+ * Copyright (C) 2012 Wolfram Sang, Pengutronix <kernel@pengutronix.de>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -231,6 +231,6 @@ static struct i2c_driver lm8333_driver = {
 };
 module_i2c_driver(lm8333_driver);
 
-MODULE_AUTHOR("Wolfram Sang <w.sang@pengutronix.de>");
+MODULE_AUTHOR("Wolfram Sang <kernel@pengutronix.de>");
 MODULE_DESCRIPTION("LM8333 keyboard driver");
 MODULE_LICENSE("GPL v2");

drivers/input/mouse/Kconfig

@@ -149,6 +149,18 @@ config MOUSE_PS2_FOCALTECH
 
 	  If unsure, say Y.
 
+config MOUSE_PS2_VMMOUSE
+	bool "Virtual mouse (vmmouse)"
+	depends on MOUSE_PS2 && X86 && HYPERVISOR_GUEST
+	help
+	  Say Y here if you are running under control of VMware hypervisor
+	  (ESXi, Workstation or Fusion). Also make sure that when you enable
+	  this option, you remove the xf86-input-vmmouse user-space driver
+	  or upgrade it to at least xf86-input-vmmouse 13.0.1, which doesn't
+	  load in the presence of an in-kernel vmmouse driver.
+
+	  If unsure, say N.
+
 config MOUSE_SERIAL
 	tristate "Serial mouse"
 	select SERIO

drivers/input/mouse/Makefile

@@ -36,6 +36,7 @@ psmouse-$(CONFIG_MOUSE_PS2_SENTELIC)	+= sentelic.o
 psmouse-$(CONFIG_MOUSE_PS2_TRACKPOINT)	+= trackpoint.o
 psmouse-$(CONFIG_MOUSE_PS2_TOUCHKIT)	+= touchkit_ps2.o
 psmouse-$(CONFIG_MOUSE_PS2_CYPRESS)	+= cypress_ps2.o
+psmouse-$(CONFIG_MOUSE_PS2_VMMOUSE)	+= vmmouse.o
 
 elan_i2c-objs := elan_i2c_core.o
 elan_i2c-$(CONFIG_MOUSE_ELAN_I2C_I2C)	+= elan_i2c_i2c.o

drivers/input/mouse/cyapa.c

@@ -723,7 +723,7 @@ static ssize_t cyapa_update_suspend_scanrate(struct device *dev,
 	} else if (sysfs_streq(buf, OFF_MODE_NAME)) {
 		cyapa->suspend_power_mode = PWR_MODE_OFF;
 	} else if (!kstrtou16(buf, 10, &sleep_time)) {
-		cyapa->suspend_sleep_time = max_t(u16, sleep_time, 1000);
+		cyapa->suspend_sleep_time = min_t(u16, sleep_time, 1000);
 		cyapa->suspend_power_mode =
 			cyapa_sleep_time_to_pwr_cmd(cyapa->suspend_sleep_time);
 	} else {
@@ -840,7 +840,7 @@ static ssize_t cyapa_update_rt_suspend_scanrate(struct device *dev,
 	if (error)
 		return error;
 
-	cyapa->runtime_suspend_sleep_time = max_t(u16, time, 1000);
+	cyapa->runtime_suspend_sleep_time = min_t(u16, time, 1000);
 	cyapa->runtime_suspend_power_mode =
 		cyapa_sleep_time_to_pwr_cmd(cyapa->runtime_suspend_sleep_time);
 

drivers/input/mouse/elan_i2c.h

@@ -25,6 +25,7 @@
 #define ETP_ENABLE_CALIBRATE	0x0002
 #define ETP_DISABLE_CALIBRATE	0x0000
 #define ETP_DISABLE_POWER	0x0001
+#define ETP_PRESSURE_OFFSET	25
 
 /* IAP Firmware handling */
 #define ETP_FW_NAME		"elan_i2c.bin"
@@ -79,6 +80,8 @@ struct elan_transport_ops {
 				struct completion *reset_done);
 
 	int (*get_report)(struct i2c_client *client, u8 *report);
+	int (*get_pressure_adjustment)(struct i2c_client *client,
+				       int *adjustment);
 };
 
 extern const struct elan_transport_ops elan_smbus_ops, elan_i2c_ops;

drivers/input/mouse/elan_i2c_core.c

@@ -4,7 +4,7 @@
  * Copyright (c) 2013 ELAN Microelectronics Corp.
  *
  * Author: 林政維 (Duson Lin) <dusonlin@emc.com.tw>
- * Version: 1.5.6
+ * Version: 1.5.7
  *
  * Based on cyapa driver:
  * copyright (c) 2011-2012 Cypress Semiconductor, Inc.
@@ -40,8 +40,7 @@
 #include "elan_i2c.h"
 
 #define DRIVER_NAME		"elan_i2c"
-#define ELAN_DRIVER_VERSION	"1.5.6"
-#define ETP_PRESSURE_OFFSET	25
+#define ELAN_DRIVER_VERSION	"1.5.7"
 #define ETP_MAX_PRESSURE	255
 #define ETP_FWIDTH_REDUCE	90
 #define ETP_FINGER_WIDTH	15
@@ -53,6 +52,7 @@
 #define ETP_REPORT_ID_OFFSET	2
 #define ETP_TOUCH_INFO_OFFSET	3
 #define ETP_FINGER_DATA_OFFSET	4
+#define ETP_HOVER_INFO_OFFSET	30
 #define ETP_MAX_REPORT_LEN	34
 
 /* The main device structure */
@@ -81,7 +81,7 @@ struct elan_tp_data {
 	u8			sm_version;
 	u8			iap_version;
 	u16			fw_checksum;
-
+	int			pressure_adjustment;
 	u8			mode;
 
 	bool			irq_wake;
@@ -229,6 +229,11 @@ static int elan_query_device_info(struct elan_tp_data *data)
 	if (error)
 		return error;
 
+	error = data->ops->get_pressure_adjustment(data->client,
+						   &data->pressure_adjustment);
+	if (error)
+		return error;
+
 	return 0;
 }
 
@@ -721,13 +726,13 @@ static const struct attribute_group *elan_sysfs_groups[] = {
  */
 static void elan_report_contact(struct elan_tp_data *data,
 				int contact_num, bool contact_valid,
-				u8 *finger_data)
+				bool hover_event, u8 *finger_data)
 {
 	struct input_dev *input = data->input;
 	unsigned int pos_x, pos_y;
 	unsigned int pressure, mk_x, mk_y;
-	unsigned int area_x, area_y, major, minor, new_pressure;
-
+	unsigned int area_x, area_y, major, minor;
+	unsigned int scaled_pressure;
 
 	if (contact_valid) {
 		pos_x = ((finger_data[0] & 0xf0) << 4) |
@@ -756,15 +761,18 @@ static void elan_report_contact(struct elan_tp_data *data,
 		major = max(area_x, area_y);
 		minor = min(area_x, area_y);
 
-		new_pressure = pressure + ETP_PRESSURE_OFFSET;
-		if (new_pressure > ETP_MAX_PRESSURE)
-			new_pressure = ETP_MAX_PRESSURE;
+		scaled_pressure = pressure + data->pressure_adjustment;
+
+		if (scaled_pressure > ETP_MAX_PRESSURE)
+			scaled_pressure = ETP_MAX_PRESSURE;
 
 		input_mt_slot(input, contact_num);
 		input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
 		input_report_abs(input, ABS_MT_POSITION_X, pos_x);
 		input_report_abs(input, ABS_MT_POSITION_Y, data->max_y - pos_y);
-		input_report_abs(input, ABS_MT_PRESSURE, new_pressure);
+		input_report_abs(input, ABS_MT_DISTANCE, hover_event);
+		input_report_abs(input, ABS_MT_PRESSURE,
+				 hover_event ? 0 : scaled_pressure);
 		input_report_abs(input, ABS_TOOL_WIDTH, mk_x);
 		input_report_abs(input, ABS_MT_TOUCH_MAJOR, major);
 		input_report_abs(input, ABS_MT_TOUCH_MINOR, minor);
@@ -780,11 +788,14 @@ static void elan_report_absolute(struct elan_tp_data *data, u8 *packet)
 	u8 *finger_data = &packet[ETP_FINGER_DATA_OFFSET];
 	int i;
 	u8 tp_info = packet[ETP_TOUCH_INFO_OFFSET];
-	bool contact_valid;
+	u8 hover_info = packet[ETP_HOVER_INFO_OFFSET];
+	bool contact_valid, hover_event;
 
+	hover_event = hover_info & 0x40;
 	for (i = 0; i < ETP_MAX_FINGERS; i++) {
 		contact_valid = tp_info & (1U << (3 + i));
-		elan_report_contact(data, i, contact_valid, finger_data);
+		elan_report_contact(data, i, contact_valid, hover_event,
+				    finger_data);
 
 		if (contact_valid)
 			finger_data += ETP_FINGER_DATA_LEN;
@@ -878,6 +889,7 @@ static int elan_setup_input_device(struct elan_tp_data *data)
 			     ETP_FINGER_WIDTH * max_width, 0, 0);
 	input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0,
 			     ETP_FINGER_WIDTH * min_width, 0, 0);
+	input_set_abs_params(input, ABS_MT_DISTANCE, 0, 1, 0, 0);
 
 	data->input = input;
 

drivers/input/mouse/elan_i2c_i2c.c

@@ -41,6 +41,7 @@
 #define ETP_I2C_MAX_X_AXIS_CMD		0x0106
 #define ETP_I2C_MAX_Y_AXIS_CMD		0x0107
 #define ETP_I2C_RESOLUTION_CMD		0x0108
+#define ETP_I2C_PRESSURE_CMD		0x010A
 #define ETP_I2C_IAP_VERSION_CMD		0x0110
 #define ETP_I2C_SET_CMD			0x0300
 #define ETP_I2C_POWER_CMD		0x0307
@@ -364,8 +365,29 @@ static int elan_i2c_get_num_traces(struct i2c_client *client,
 		return error;
 	}
 
-	*x_traces = val[0] - 1;
-	*y_traces = val[1] - 1;
+	*x_traces = val[0];
+	*y_traces = val[1];
+
+	return 0;
+}
+
+static int elan_i2c_get_pressure_adjustment(struct i2c_client *client,
+					    int *adjustment)
+{
+	int error;
+	u8 val[3];
+
+	error = elan_i2c_read_cmd(client, ETP_I2C_PRESSURE_CMD, val);
+	if (error) {
+		dev_err(&client->dev, "failed to get pressure format: %d\n",
+			error);
+		return error;
+	}
+
+	if ((val[0] >> 4) & 0x1)
+		*adjustment = 0;
+	else
+		*adjustment = ETP_PRESSURE_OFFSET;
 
 	return 0;
 }
@@ -602,6 +624,7 @@ const struct elan_transport_ops elan_i2c_ops = {
 	.get_sm_version		= elan_i2c_get_sm_version,
 	.get_product_id		= elan_i2c_get_product_id,
 	.get_checksum		= elan_i2c_get_checksum,
+	.get_pressure_adjustment = elan_i2c_get_pressure_adjustment,
 
 	.get_max		= elan_i2c_get_max,
 	.get_resolution		= elan_i2c_get_resolution,

drivers/input/mouse/elan_i2c_smbus.c

@@ -268,12 +268,19 @@ static int elan_smbus_get_num_traces(struct i2c_client *client,
 		return error;
 	}
 
-	*x_traces = val[1] - 1;
-	*y_traces = val[2] - 1;
+	*x_traces = val[1];
+	*y_traces = val[2];
 
 	return 0;
 }
 
+static int elan_smbus_get_pressure_adjustment(struct i2c_client *client,
+					      int *adjustment)
+{
+	*adjustment = ETP_PRESSURE_OFFSET;
+	return 0;
+}
+
 static int elan_smbus_iap_get_mode(struct i2c_client *client,
 				   enum tp_mode *mode)
 {
@@ -497,6 +504,7 @@ const struct elan_transport_ops elan_smbus_ops = {
 	.get_sm_version		= elan_smbus_get_sm_version,
 	.get_product_id		= elan_smbus_get_product_id,
 	.get_checksum		= elan_smbus_get_checksum,
+	.get_pressure_adjustment = elan_smbus_get_pressure_adjustment,
 
 	.get_max		= elan_smbus_get_max,
 	.get_resolution		= elan_smbus_get_resolution,

drivers/input/mouse/psmouse-base.c

@@ -36,6 +36,7 @@
 #include "sentelic.h"
 #include "cypress_ps2.h"
 #include "focaltech.h"
+#include "vmmouse.h"
 
 #define DRIVER_DESC	"PS/2 mouse driver"
 
@@ -790,6 +791,13 @@ static int psmouse_extensions(struct psmouse *psmouse,
 		}
 	}
 
+	if (psmouse_do_detect(vmmouse_detect, psmouse, set_properties) == 0) {
+		if (max_proto > PSMOUSE_IMEX) {
+			if (!set_properties || vmmouse_init(psmouse) == 0)
+				return PSMOUSE_VMMOUSE;
+		}
+	}
+
 /*
  * Try Kensington ThinkingMouse (we try first, because synaptics probe
  * upsets the thinkingmouse).
@@ -1112,6 +1120,15 @@ static const struct psmouse_protocol psmouse_protocols[] = {
 		.detect		= focaltech_detect,
 		.init		= focaltech_init,
 	},
+#endif
+#ifdef CONFIG_MOUSE_PS2_VMMOUSE
+	{
+		.type		= PSMOUSE_VMMOUSE,
+		.name		= VMMOUSE_PSNAME,
+		.alias		= "vmmouse",
+		.detect		= vmmouse_detect,
+		.init		= vmmouse_init,
+	},
 #endif
 	{
 		.type		= PSMOUSE_AUTO,

drivers/input/mouse/psmouse.h

@@ -103,6 +103,7 @@ enum psmouse_type {
 	PSMOUSE_SYNAPTICS_RELATIVE,
 	PSMOUSE_CYPRESS,
 	PSMOUSE_FOCALTECH,
+	PSMOUSE_VMMOUSE,
 	PSMOUSE_AUTO		/* This one should always be last */
 };
 

drivers/input/mouse/vmmouse.h

+/*
+ * Driver for Virtual PS/2 Mouse on VMware and QEMU hypervisors.
+ *
+ * Copyright (C) 2014, VMware, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef _VMMOUSE_H
+#define _VMMOUSE_H
+
+#ifdef CONFIG_MOUSE_PS2_VMMOUSE
+#define VMMOUSE_PSNAME  "VirtualPS/2"
+
+int vmmouse_detect(struct psmouse *psmouse, bool set_properties);
+int vmmouse_init(struct psmouse *psmouse);
+#else
+static inline int vmmouse_detect(struct psmouse *psmouse, bool set_properties)
+{
+	return -ENOSYS;
+}
+static inline int vmmouse_init(struct psmouse *psmouse)
+{
+	return -ENOSYS;
+}
+#endif
+
+#endif

drivers/input/touchscreen/atmel_mxt_ts.c

@@ -14,6 +14,8 @@
  *
  */
 
+#include <linux/acpi.h>
+#include <linux/dmi.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/completion.h>
@@ -2371,7 +2373,7 @@ static void mxt_input_close(struct input_dev *dev)
 }
 
 #ifdef CONFIG_OF
-static struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
+static const struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
 {
 	struct mxt_platform_data *pdata;
 	u32 *keymap;
@@ -2379,7 +2381,7 @@ static struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
 	int proplen, i, ret;
 
 	if (!client->dev.of_node)
-		return ERR_PTR(-ENODEV);
+		return ERR_PTR(-ENOENT);
 
 	pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
@@ -2410,25 +2412,132 @@ static struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
 	return pdata;
 }
 #else
-static struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
+static const struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
 {
-	dev_dbg(&client->dev, "No platform data specified\n");
-	return ERR_PTR(-EINVAL);
+	return ERR_PTR(-ENOENT);
+}
+#endif
+
+#ifdef CONFIG_ACPI
+
+struct mxt_acpi_platform_data {
+	const char *hid;
+	struct mxt_platform_data pdata;
+};
+
+static unsigned int samus_touchpad_buttons[] = {
+	KEY_RESERVED,
+	KEY_RESERVED,
+	KEY_RESERVED,
+	BTN_LEFT
+};
+
+static struct mxt_acpi_platform_data samus_platform_data[] = {
+	{
+		/* Touchpad */
+		.hid	= "ATML0000",
+		.pdata	= {
+			.t19_num_keys	= ARRAY_SIZE(samus_touchpad_buttons),
+			.t19_keymap	= samus_touchpad_buttons,
+		},
+	},
+	{
+		/* Touchscreen */
+		.hid	= "ATML0001",
+	},
+	{ }
+};
+
+static const struct dmi_system_id mxt_dmi_table[] = {
+	{
+		/* 2015 Google Pixel */
+		.ident = "Chromebook Pixel 2",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Samus"),
+		},
+		.driver_data = samus_platform_data,
+	},
+	{ }
+};
+
+static const struct mxt_platform_data *mxt_parse_acpi(struct i2c_client *client)
+{
+	struct acpi_device *adev;
+	const struct dmi_system_id *system_id;
+	const struct mxt_acpi_platform_data *acpi_pdata;
+
+	/*
+	 * Ignore ACPI devices representing bootloader mode.
+	 *
+	 * This is a bit of a hack: Google Chromebook BIOS creates ACPI
+	 * devices for both application and bootloader modes, but we are
+	 * interested in application mode only (if device is in bootloader
+	 * mode we'll end up switching into application anyway). So far
+	 * application mode addresses were all above 0x40, so we'll use it
+	 * as a threshold.
+	 */
+	if (client->addr < 0x40)
+		return ERR_PTR(-ENXIO);
+
+	adev = ACPI_COMPANION(&client->dev);
+	if (!adev)
+		return ERR_PTR(-ENOENT);
+
+	system_id = dmi_first_match(mxt_dmi_table);
+	if (!system_id)
+		return ERR_PTR(-ENOENT);
+
+	acpi_pdata = system_id->driver_data;
+	if (!acpi_pdata)
+		return ERR_PTR(-ENOENT);
+
+	while (acpi_pdata->hid) {
+		if (!strcmp(acpi_device_hid(adev), acpi_pdata->hid))
+			return &acpi_pdata->pdata;
+
+		acpi_pdata++;
+	}
+
+	return ERR_PTR(-ENOENT);
+}
+#else
+static const struct mxt_platform_data *mxt_parse_acpi(struct i2c_client *client)
+{
+	return ERR_PTR(-ENOENT);
 }
 #endif
 
+static const struct mxt_platform_data *
+mxt_get_platform_data(struct i2c_client *client)
+{
+	const struct mxt_platform_data *pdata;
+
+	pdata = dev_get_platdata(&client->dev);
+	if (pdata)
+		return pdata;
+
+	pdata = mxt_parse_dt(client);
+	if (!IS_ERR(pdata) || PTR_ERR(pdata) != -ENOENT)
+		return pdata;
+
+	pdata = mxt_parse_acpi(client);
+	if (!IS_ERR(pdata) || PTR_ERR(pdata) != -ENOENT)
+		return pdata;
+
+	dev_err(&client->dev, "No platform data specified\n");
+	return ERR_PTR(-EINVAL);
+}
+
 static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
 {
 	struct mxt_data *data;
 	const struct mxt_platform_data *pdata;
 	int error;
 
-	pdata = dev_get_platdata(&client->dev);
-	if (!pdata) {
-		pdata = mxt_parse_dt(client);
+	pdata = mxt_get_platform_data(client);
 	if (IS_ERR(pdata))
 		return PTR_ERR(pdata);
-	}
 
 	data = kzalloc(sizeof(struct mxt_data), GFP_KERNEL);
 	if (!data) {
@@ -2536,6 +2645,15 @@ static const struct of_device_id mxt_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, mxt_of_match);
 
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id mxt_acpi_id[] = {
+	{ "ATML0000", 0 },	/* Touchpad */
+	{ "ATML0001", 0 },	/* Touchscreen */
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, mxt_acpi_id);
+#endif
+
 static const struct i2c_device_id mxt_id[] = {
 	{ "qt602240_ts", 0 },
 	{ "atmel_mxt_ts", 0 },
@@ -2550,6 +2668,7 @@ static struct i2c_driver mxt_driver = {
 		.name	= "atmel_mxt_ts",
 		.owner	= THIS_MODULE,
 		.of_match_table = of_match_ptr(mxt_of_match),
+		.acpi_match_table = ACPI_PTR(mxt_acpi_id),
 		.pm	= &mxt_pm_ops,
 	},
 	.probe		= mxt_probe,

drivers/input/touchscreen/elants_i2c.c

@@ -699,7 +699,7 @@ static int elants_i2c_fw_update(struct elants_data *ts)
 	char *fw_name;
 	int error;
 
-	fw_name = kasprintf(GFP_KERNEL, "elants_i2c_%4x.bin", ts->hw_version);
+	fw_name = kasprintf(GFP_KERNEL, "elants_i2c_%04x.bin", ts->hw_version);
 	if (!fw_name)
 		return -ENOMEM;