Merge bk://linuxusb.bkbits.net/linus-2.5

into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux

drivers/usb/Makefile

@@ -13,6 +13,8 @@ subdir-$(CONFIG_USB_EHCI_HCD)	+= host
 subdir-$(CONFIG_USB_OHCI_HCD)		+= host
 subdir-$(CONFIG_USB_OHCI)		+= host
 subdir-$(CONFIG_USB_UHCI_ALT)		+= host
+subdir-$(CONFIG_USB_UHCI_HCD_ALT)	+= host
+subdir-$(CONFIG_USB_UHCI_HCD)		+= host
 subdir-$(CONFIG_USB_UHCI)		+= host
 
 subdir-$(CONFIG_USB_ACM)		+= class

drivers/usb/net/pegasus.c

@@ -62,7 +62,7 @@
 #define DRIVER_AUTHOR "Petko Manolov <petkan@users.sourceforge.net>"
 #define DRIVER_DESC "Pegasus/Pegasus II USB Ethernet driver"
 
-static const char driver_name [] = "pegasus";
+static const char driver_name[] = "pegasus";
 
 #define	PEGASUS_USE_INTR
 #define	PEGASUS_WRITE_EEPROM

drivers/usb/net/pegasus.h

@@ -123,6 +123,7 @@ struct usb_eth_dev {
 #define	VENDOR_ABOCOM		0x07b8
 #define	VENDOR_ACCTON		0x083a
 #define	VENDOR_ADMTEK		0x07a6
+#define	VENDOR_AEILAB		0x3334
 #define	VENDOR_ALLIEDTEL	0x07c9
 #define	VENDOR_BELKIN		0x050d
 #define	VENDOR_BILLIONTON	0x08dd
@@ -179,6 +180,8 @@ PEGASUS_DEV( "ADMtek AN986 \"Pegasus\" USB Ethernet (eval. board)",
 		DEFAULT_GPIO_RESET | HAS_HOME_PNA )
 PEGASUS_DEV( "AN986A USB MAC", VENDOR_ADMTEK, 1986,
 		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "AEI USB Fast Ethernet Adapter", VENDOR_AEILAB, 0x1701,
+		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "Allied Telesyn Int. AT-USB100", VENDOR_ALLIEDTEL, 0xb100,
 		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "Belkin F5D5050 USB Ethernet", VENDOR_BELKIN, 0x0121,

drivers/usb/storage/Makefile

@@ -11,14 +11,14 @@ EXTRA_CFLAGS	:= -I../../scsi/
 obj-$(CONFIG_USB_STORAGE)	+= usb-storage.o
 
 usb-storage-obj-$(CONFIG_USB_STORAGE_DEBUG)	+= debug.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_HP8200e)	+= shuttle_usbat.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_SDDR09)	+= sddr09.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_SDDR55)	+= sddr55.o
+usb-storage-obj-$(CONFIG_USB_STORAGE_HP8200e)	+= shuttle_usbat.o raw_bulk.o
+usb-storage-obj-$(CONFIG_USB_STORAGE_SDDR09)	+= sddr09.o raw_bulk.o
+usb-storage-obj-$(CONFIG_USB_STORAGE_SDDR55)	+= sddr55.o raw_bulk.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_FREECOM)	+= freecom.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_DPCM)	+= dpcm.o
 usb-storage-obj-$(CONFIG_USB_STORAGE_ISD200)	+= isd200.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_DATAFAB)	+= datafab.o
-usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT)	+= jumpshot.o
+usb-storage-obj-$(CONFIG_USB_STORAGE_DATAFAB)	+= datafab.o raw_bulk.o
+usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT)	+= jumpshot.o raw_bulk.o
 
 usb-storage-objs :=	scsiglue.o protocol.o transport.o usb.o \
 			initializers.o $(usb-storage-obj-y)

drivers/usb/storage/raw_bulk.c

+/*
+ * Common routines for a handful of drivers.
+ * Unrelated to CF/SM - just USB stuff.
+ *
+ * This is mostly a thin layer on top of transport.c.
+ * It converts routines that return values like -ENOENT and -EPIPE
+ * into routines that return USB_STOR_TRANSPORT_ABORTED etc.
+ *
+ * There is also some debug printing here.
+ */
+
+#include "debug.h"
+#include "transport.h"
+#include "raw_bulk.h"
+
+#ifdef CONFIG_USB_STORAGE_DEBUG
+#define DEBUG_PRCT 12
+#else
+#define DEBUG_PRCT 0
+#endif
+
+/*
+ * Send a control message and wait for the response.
+ *
+ * us - the pointer to the us_data structure for the device to use
+ *
+ * request - the URB Setup Packet's first 6 bytes. The first byte always
+ *  corresponds to the request type, and the second byte always corresponds
+ *  to the request.  The other 4 bytes do not correspond to value and index,
+ *  since they are used in a custom way by the SCM protocol.
+ *
+ * xfer_data - a buffer from which to get, or to which to store, any data
+ *  that gets send or received, respectively, with the URB. Even though
+ *  it looks like we allocate a buffer in this code for the data, xfer_data
+ *  must contain enough allocated space.
+ *
+ * xfer_len - the number of bytes to send or receive with the URB.
+ *
+ */
+
+int
+usb_storage_send_control(struct us_data *us,
+			 int pipe,
+			 unsigned char request,
+			 unsigned char requesttype,
+			 unsigned int value,
+			 unsigned int index,
+			 unsigned char *xfer_data,
+			 unsigned int xfer_len) {
+
+	int result;
+
+	// Send the URB to the device and wait for a response.
+
+	/* Why are request and request type reversed in this call? */
+
+	result = usb_stor_control_msg(us, pipe,
+			request, requesttype, value, index,
+			xfer_data, xfer_len);
+
+
+	// Check the return code for the command.
+
+	if (result < 0) {
+		/* if the command was aborted, indicate that */
+		if (result == -ENOENT)
+			return USB_STOR_TRANSPORT_ABORTED;
+
+		/* a stall is a fatal condition from the device */
+		if (result == -EPIPE) {
+			US_DEBUGP("-- Stall on control pipe. Clearing\n");
+			result = usb_stor_clear_halt(us, pipe);
+			US_DEBUGP("-- usb_stor_clear_halt() returns %d\n",
+				  result);
+			return USB_STOR_TRANSPORT_FAILED;
+		}
+
+		/* Uh oh... serious problem here */
+		return USB_STOR_TRANSPORT_ERROR;
+	}
+
+	return USB_STOR_TRANSPORT_GOOD;
+}
+
+int
+usb_storage_raw_bulk(struct us_data *us, int direction, unsigned char *data,
+		     unsigned int len, unsigned int *act_len) {
+
+	int result;
+	int pipe;
+
+	if (direction == SCSI_DATA_READ)
+		pipe = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
+	else
+		pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
+
+	result = usb_stor_bulk_msg(us, data, pipe, len, act_len);
+
+	/* if we stall, we need to clear it before we go on */
+	if (result == -EPIPE) {
+		US_DEBUGP("EPIPE: clearing endpoint halt for"
+			  " pipe 0x%x, stalled at %d bytes\n",
+			  pipe, *act_len);
+		usb_stor_clear_halt(us, pipe);
+		/* return US_BULK_TRANSFER_SHORT; */
+	}
+
+	if (result) {
+		/* -ENOENT -- we canceled this transfer */
+		if (result == -ENOENT) {
+			US_DEBUGP("raw_bulk(): transfer aborted\n");
+			return US_BULK_TRANSFER_ABORTED;
+		}
+
+		/* NAK - that means we've retried a few times already */
+       		if (result == -ETIMEDOUT)
+			US_DEBUGP("raw_bulk(): device NAKed\n");
+		else if (result == -EOVERFLOW)
+			US_DEBUGP("raw_bulk(): babble/overflow\n");
+		else if (result == -ECONNRESET)
+			US_DEBUGP("raw_bulk(): asynchronous reset\n");
+		else if (result != -EPIPE)
+			US_DEBUGP("raw_bulk(): unknown error %d\n",
+				  result);
+
+		return US_BULK_TRANSFER_FAILED;
+	}
+
+	if (*act_len != len) {
+		US_DEBUGP("Warning: Transferred only %d of %d bytes\n",
+			  *act_len, len);
+		return US_BULK_TRANSFER_SHORT;
+	}
+
+#if 0
+	US_DEBUGP("raw_bulk(): Transferred %s %d of %d bytes\n",
+		  (direction == SCSI_DATA_READ) ? "in" : "out",
+		  *act_len, len);
+#endif
+
+	return US_BULK_TRANSFER_GOOD;
+}
+
+int
+usb_storage_bulk_transport(struct us_data *us, int direction,
+			   unsigned char *data, unsigned int len,
+			   int use_sg) {
+
+	int result = USB_STOR_TRANSPORT_GOOD;
+	int transferred = 0;
+	int i;
+	struct scatterlist *sg;
+	unsigned int act_len;
+
+	if (len == 0)
+		return USB_STOR_TRANSPORT_GOOD;
+
+#if DEBUG_PRCT
+
+	if (direction == SCSI_DATA_WRITE && !use_sg) {
+		char string[64];
+
+		/* Debug-print the first N bytes of the write transfer */
+
+		strcpy(string, "wr: ");
+		for (i=0; i<len && i<DEBUG_PRCT; i++) {
+			sprintf(string+strlen(string), "%02X ", data[i]);
+			if ((i%16) == 15) {
+				US_DEBUGP("%s\n", string);
+				strcpy(string, "wr: ");
+			}
+		}
+		if ((i%16)!=0)
+			US_DEBUGP("%s\n", string);
+	}
+
+	US_DEBUGP("SCM data %s transfer %d sg buffers %d\n",
+		  (direction == SCSI_DATA_READ) ? "in" : "out",
+		  len, use_sg);
+
+#endif /* DEBUG_PRCT */
+
+	if (!use_sg)
+		result = usb_storage_raw_bulk(us, direction,
+					      data, len, &act_len);
+	else {
+		sg = (struct scatterlist *)data;
+
+		for (i=0; i<use_sg && transferred<len; i++) {
+			unsigned char *buf;
+			unsigned int length;
+
+			buf = page_address(sg[i].page) + sg[i].offset;
+			length = len-transferred;
+			if (length > sg[i].length)
+				length = sg[i].length;
+
+			result = usb_storage_raw_bulk(us, direction,
+						      buf, length, &act_len);
+			if (result != US_BULK_TRANSFER_GOOD)
+				break;
+			transferred += length;
+		}
+	}
+
+#if DEBUG_PRCT
+
+	if (direction == SCSI_DATA_READ && !use_sg) {
+		char string[64];
+
+		/* Debug-print the first N bytes of the read transfer */
+
+		strcpy(string, "rd: ");
+		for (i=0; i<len && i<act_len && i<DEBUG_PRCT; i++) {
+			sprintf(string+strlen(string), "%02X ", data[i]);
+			if ((i%16) == 15) {
+				US_DEBUGP("%s\n", string);
+				strcpy(string, "rd: ");
+			}
+		}
+		if ((i%16)!=0)
+			US_DEBUGP("%s\n", string);
+	}
+
+#endif /* DEBUG_PRCT */
+
+	return result;
+}
+
+/*
+ * The routines below convert scatter-gather to single buffer.
+ * Some drivers claim this is necessary.
+ * Nothing is done when use_sg is zero.
+ */
+
+/*
+ * Copy from scatter-gather buffer into a newly allocated single buffer,
+ * starting at a given index and offset.
+ * When done, update index and offset.
+ * Return a pointer to the single buffer.
+ */
+unsigned char *
+us_copy_from_sgbuf(unsigned char *content, int len,
+		   int *index, int *offset, int use_sg) {
+	struct scatterlist *sg;
+	unsigned char *buffer;
+	int transferred, i;
+
+	if (!use_sg)
+		return content;
+
+	sg = (struct scatterlist *)content;
+	buffer = kmalloc(len, GFP_NOIO);
+	if (buffer == NULL)
+		return NULL;
+
+	transferred = 0;
+	i = *index;
+	while (i < use_sg && transferred < len) {
+		unsigned char *ptr;
+		unsigned int length, room;
+
+		ptr = page_address(sg[i].page) + sg[i].offset + *offset;
+
+		room = sg[i].length - *offset;
+		length = len - transferred;
+		if (length > room)
+			length = room;
+
+		memcpy(buffer+transferred, ptr, length);
+		transferred += length;
+		*offset += length;
+		if (length == room) {
+			i++;
+			*offset = 0;
+		}
+	}
+	*index = i;
+
+	return buffer;
+}
+
+unsigned char *
+us_copy_from_sgbuf_all(unsigned char *content, int len, int use_sg) {
+	int index, offset;
+
+	index = offset = 0;
+	return us_copy_from_sgbuf(content, len, &index, &offset, use_sg);
+}
+
+/*
+ * Copy from a single buffer into a scatter-gather buffer,
+ * starting at a given index and offset.
+ * When done, update index and offset.
+ */
+void
+us_copy_to_sgbuf(unsigned char *buffer, int buflen,
+		 void *content, int *index, int *offset, int use_sg) {
+	struct scatterlist *sg;
+	int i, transferred;
+
+	if (!use_sg)
+		return;
+
+	transferred = 0;
+	sg = content;
+	i = *index;
+	while (i < use_sg && transferred < buflen) {
+		unsigned char *ptr;
+		unsigned int length, room;
+
+		ptr = page_address(sg[i].page) + sg[i].offset + *offset;
+
+		room = sg[i].length - *offset;
+		length = buflen - transferred;
+		if (length > room)
+			length = room;
+		
+		memcpy(ptr, buffer+transferred, length);
+		transferred += sg[i].length;
+		*offset += length;
+		if (length == room) {
+			i++;
+			*offset = 0;
+		}
+	}
+	*index = i;
+}
+
+void
+us_copy_to_sgbuf_all(unsigned char *buffer, int buflen,
+		     void *content, int use_sg) {
+	int index, offset;
+
+	index = offset = 0;
+	us_copy_to_sgbuf(buffer, buflen, content, &index, &offset, use_sg);
+}

drivers/usb/storage/raw_bulk.h

+#ifndef _USB_STORAGE_RAW_BULK_H_
+#define _USB_STORAGE_RAW_BULK_H_
+
+/* usb bulk */
+extern int usb_storage_send_control(
+	struct us_data *us, int pipe,
+	unsigned char request, unsigned char requesttype,
+	unsigned int value, unsigned int index,
+	unsigned char *xfer_data, unsigned int xfer_len);
+
+extern int usb_storage_raw_bulk(
+	struct us_data *us, int direction,
+	unsigned char *data, unsigned int len, unsigned int *act_len);
+
+extern int usb_storage_bulk_transport(
+	struct us_data *us, int direction,
+	unsigned char *data, unsigned int len, int use_sg);
+
+/* scatter-gather */
+extern unsigned char *us_copy_from_sgbuf(
+	unsigned char *content, int buflen,
+	int *index, int *offset, int use_sg);
+
+extern unsigned char *us_copy_from_sgbuf_all(
+	unsigned char *content, int len, int use_sg);
+
+extern void us_copy_to_sgbuf(
+	unsigned char *buffer, int buflen,
+	void *content, int *index, int *offset, int use_sg);
+
+extern void us_copy_to_sgbuf_all(
+	unsigned char *buffer, int buflen,
+	void *content, int use_sg);
+
+#endif

drivers/usb/storage/shuttle_usbat.c

@@ -40,6 +40,7 @@
  */
 
 #include "transport.h"
+#include "raw_bulk.h"
 #include "protocol.h"
 #include "usb.h"
 #include "debug.h"
@@ -61,174 +62,6 @@ extern int usb_stor_bulk_msg(struct us_data *us, void *data, int pipe,
 
 int transferred = 0;
 
-/*
- * Send a control message and wait for the response.
- *
- * us - the pointer to the us_data structure for the device to use
- *
- * request - the URB Setup Packet's first 6 bytes. The first byte always
- *  corresponds to the request type, and the second byte always corresponds
- *  to the request.  The other 4 bytes do not correspond to value and index,
- *  since they are used in a custom way by the SCM protocol.
- *
- * xfer_data - a buffer from which to get, or to which to store, any data
- *  that gets send or received, respectively, with the URB. Even though
- *  it looks like we allocate a buffer in this code for the data, xfer_data
- *  must contain enough allocated space.
- *
- * xfer_len - the number of bytes to send or receive with the URB.
- *
- */
-
-static int usbat_send_control(struct us_data *us,
-		int pipe,
-		unsigned char request,
-		unsigned char requesttype,
-		unsigned short value,
-		unsigned short index,
-		unsigned char *xfer_data,
-		unsigned int xfer_len) {
-
-	int result;
-
-	// Send the URB to the device and wait for a response.
-
-	/* Why are request and request type reversed in this call? */
-
-	result = usb_stor_control_msg(us, pipe,
-			request, requesttype, value, index,
-			xfer_data, xfer_len);
-
-
-	// Check the return code for the command.
-
-	if (result < 0) {
-		/* if the command was aborted, indicate that */
-		if (result == -ENOENT)
-			return USB_STOR_TRANSPORT_ABORTED;
-
-		/* a stall is a fatal condition from the device */
-		if (result == -EPIPE) {
-			US_DEBUGP("-- Stall on control pipe. Clearing\n");
-			result = usb_stor_clear_halt(us, pipe);
-			US_DEBUGP("-- usb_stor_clear_halt() returns %d\n", result);
-			return USB_STOR_TRANSPORT_FAILED;
-		}
-
-		/* Uh oh... serious problem here */
-		return USB_STOR_TRANSPORT_ERROR;
-	}
-
-	return USB_STOR_TRANSPORT_GOOD;
-}
-
-static int usbat_raw_bulk(struct us_data *us, 
-		int direction,
-		unsigned char *data,
-		unsigned short len) {
-
-	int result;
-	int act_len;
-	int pipe;
-
-	if (direction == SCSI_DATA_READ)
-		pipe = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
-	else
-		pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
-
-	result = usb_stor_bulk_msg(us, data, pipe, len, &act_len);
-
-        /* if we stall, we need to clear it before we go on */
-        if (result == -EPIPE) {
-       	        US_DEBUGP("EPIPE: clearing endpoint halt for"
-			" pipe 0x%x, stalled at %d bytes\n",
-			pipe, act_len);
-               	usb_stor_clear_halt(us, pipe);
-        }
-
-	if (result) {
-
-                /* NAK - that means we've retried a few times already */
-       	        if (result == -ETIMEDOUT) {
-                        US_DEBUGP("usbat_raw_bulk():"
-				" device NAKed\n");
-                        return US_BULK_TRANSFER_FAILED;
-                }
-
-                /* -ENOENT -- we canceled this transfer */
-                if (result == -ENOENT) {
-                        US_DEBUGP("usbat_raw_bulk():"
-				" transfer aborted\n");
-                        return US_BULK_TRANSFER_ABORTED;
-                }
-
-		if (result == -EPIPE) {
-			US_DEBUGP("usbat_raw_bulk():"
-				" output pipe stalled\n");
-			return US_BULK_TRANSFER_SHORT;
-		}
-
-                /* the catch-all case */
-                US_DEBUGP("us_transfer_partial(): unknown error\n");
-                return US_BULK_TRANSFER_FAILED;
-        }
-
-	if (act_len != len) {
-		US_DEBUGP("Warning: Transferred only %d bytes\n",
-			act_len);
-		return US_BULK_TRANSFER_SHORT;
-	}
-
-	US_DEBUGP("Transferred %s %d of %d bytes\n", 
-		direction==SCSI_DATA_READ ? "in" : "out", act_len, len);
-
-	return US_BULK_TRANSFER_GOOD;
-}
-
-/*
- * Note: direction must be set if command_len == 0.
- */
-
-static int usbat_bulk_transport(struct us_data *us,
-			  unsigned char *command,
-			  unsigned short command_len,
-			  int direction,
-			  unsigned char *data,
-			  unsigned short len,
-			  int use_sg) {
-
-	int result = USB_STOR_TRANSPORT_GOOD;
-	int transferred = 0;
-	int i;
-	struct scatterlist *sg;
-
-	if (len==0)
-		return USB_STOR_TRANSPORT_GOOD;
-
-	/* transfer the data payload for the command, if there is any */
-
-	if (command_len != 0)
-		direction = (command[0]&0x80) ? SCSI_DATA_READ :
-			SCSI_DATA_WRITE;
-
-	if (!use_sg)
-		result = usbat_raw_bulk(us, direction, data, len);
-	else {
-		sg = (struct scatterlist *)data;
-		for (i=0; i<use_sg && transferred<len; i++) {
-			result = usbat_raw_bulk(us, direction,
-				page_address(sg[i].page) + sg[i].offset, 
-				len-transferred > sg[i].length ?
-					sg[i].length : len-transferred);
-			if (result!=US_BULK_TRANSFER_GOOD)
-				break;
-			transferred += sg[i].length;
-		}
-	}
-
-	return result;
-}
-
 int usbat_read(struct us_data *us,
 	     unsigned char access,
 	     unsigned char reg, 
@@ -236,7 +69,7 @@ int usbat_read(struct us_data *us,
 
 	int result;
 
-	result = usbat_send_control(us,
+	result = usb_storage_send_control(us,
 		usb_rcvctrlpipe(us->pusb_dev,0),
 		access,
 		0xC0,
@@ -255,7 +88,7 @@ int usbat_write(struct us_data *us,
 
 	int result;
 
-	result = usbat_send_control(us,
+	result = usb_storage_send_control(us,
 		usb_sndctrlpipe(us->pusb_dev,0),
 		access|0x01,
 		0x40,
@@ -281,7 +114,7 @@ int usbat_set_shuttle_features(struct us_data *us,
 		test_pattern, mask_byte, subcountL, subcountH
 	};
 
-	result = usbat_send_control(us,
+	result = usb_storage_send_control(us,
 		usb_sndctrlpipe(us->pusb_dev,0),
 		0x80,
 		0x40,
@@ -306,7 +139,7 @@ int usbat_read_block(struct us_data *us,
 		LSB_of(len), MSB_of(len)
 	};
 
-	result = usbat_send_control(us,
+	result = usb_storage_send_control(us,
 		usb_sndctrlpipe(us->pusb_dev,0),
 		0x80,
 		0x40,
@@ -318,8 +151,7 @@ int usbat_read_block(struct us_data *us,
 	if (result != USB_STOR_TRANSPORT_GOOD)
 		return result;
 
-	result = usbat_bulk_transport(us,
-		NULL, 0, SCSI_DATA_READ, content, len, use_sg);
+	result = usb_storage_bulk_transport(us, SCSI_DATA_READ, content, len, use_sg);
 
 	return result;
 }
@@ -388,7 +220,7 @@ int usbat_write_block(struct us_data *us,
 		LSB_of(len), MSB_of(len)
 	};
 
-	result = usbat_send_control(us,
+	result = usb_storage_send_control(us,
 		usb_sndctrlpipe(us->pusb_dev,0),
 		0x80,
 		0x40,
@@ -400,8 +232,7 @@ int usbat_write_block(struct us_data *us,
 	if (result != USB_STOR_TRANSPORT_GOOD)
 		return result;
 
-	result = usbat_bulk_transport(us,
-		NULL, 0, SCSI_DATA_WRITE, content, len, use_sg);
+	result = usb_storage_bulk_transport(us, SCSI_DATA_WRITE, content, len, use_sg);
 
 	if (result != USB_STOR_TRANSPORT_GOOD)
 		return result;
@@ -460,7 +291,7 @@ int usbat_rw_block_test(struct us_data *us,
 		 * that, we just return a failure.
 		 */
 
-		result = usbat_send_control(us,
+		result = usb_storage_send_control(us,
 			  usb_sndctrlpipe(us->pusb_dev,0),
 			0x80,
 			0x40,
@@ -474,8 +305,8 @@ int usbat_rw_block_test(struct us_data *us,
 
 		if (i==0) {
 
-			result = usbat_bulk_transport(us,
-				NULL, 0, SCSI_DATA_WRITE, 
+			result = usb_storage_bulk_transport(us,
+				SCSI_DATA_WRITE, 
 				data, num_registers*2, 0);
 
 			if (result!=USB_STOR_TRANSPORT_GOOD)
@@ -488,8 +319,8 @@ int usbat_rw_block_test(struct us_data *us,
 		//	direction == SCSI_DATA_WRITE ? "out" : "in",
 		//	len, use_sg);
 
-		result = usbat_bulk_transport(us,
-			NULL, 0, direction, content, len, use_sg);
+		result = usb_storage_bulk_transport(us,
+			direction, content, len, use_sg);
 
 		/*
 		 * If we get a stall on the bulk download, we'll retry
@@ -576,7 +407,7 @@ int usbat_multiple_write(struct us_data *us,
 		data[1+(i<<1)] = data_out[i];
 	}
 
-	result = usbat_send_control(us,
+	result = usb_storage_send_control(us,
 		usb_sndctrlpipe(us->pusb_dev,0),
 		0x80,
 		0x40,
@@ -588,10 +419,10 @@ int usbat_multiple_write(struct us_data *us,
 	if (result != USB_STOR_TRANSPORT_GOOD)
 		return result;
 
-	result = usbat_bulk_transport(us,
-		NULL, 0, SCSI_DATA_WRITE, data, num_registers*2, 0);
+	result = usb_storage_bulk_transport(us,
+		SCSI_DATA_WRITE, data, num_registers*2, 0);
 
-	if (result!=USB_STOR_TRANSPORT_GOOD)
+	if (result != USB_STOR_TRANSPORT_GOOD)
 		return result;
 
 	return usbat_wait_not_busy(us, 0);
@@ -602,7 +433,7 @@ int usbat_read_user_io(struct us_data *us,
 
 	int result;
 
-	result = usbat_send_control(us,
+	result = usb_storage_send_control(us,
 		usb_rcvctrlpipe(us->pusb_dev,0),
 		0x82,
 		0xC0,
@@ -620,7 +451,7 @@ int usbat_write_user_io(struct us_data *us,
 
 	int result;
 
-	result = usbat_send_control(us,
+	result = usb_storage_send_control(us,
 		usb_sndctrlpipe(us->pusb_dev,0),
 		0x82,
 		0x40,
@@ -646,7 +477,6 @@ int usbat_handle_read10(struct us_data *us,
 	unsigned char *buffer;
 	unsigned int len;
 	unsigned int sector;
-	unsigned int amount;
 	struct scatterlist *sg = NULL;
 	int sg_segment = 0;
 	int sg_offset = 0;
@@ -735,31 +565,11 @@ int usbat_handle_read10(struct us_data *us,
 
 		// Transfer the received data into the srb buffer
 
-		if (!srb->use_sg) {
+		if (srb->use_sg)
+			us_copy_to_sgbuf(buffer, len, sg,
+					 &sg_segment, &sg_offset, srb->use_sg);
+		else
 			memcpy(srb->request_buffer+transferred, buffer, len);
-		} else {
-			amount = 0;
-			while (amount<len) {
-				if (len - amount >= 
-					  sg[sg_segment].length-sg_offset) {
-				  memcpy(page_address(sg[sg_segment].page) +
-					 sg[sg_segment].offset + sg_offset,
-					 buffer + amount,
-					 sg[sg_segment].length - sg_offset);
-				  amount += 
-					  sg[sg_segment].length-sg_offset;
-				  sg_segment++;
-				  sg_offset=0;
-				} else {
-				  memcpy(page_address(sg[sg_segment].page) +
-					 sg[sg_segment].offset + sg_offset,
-					 buffer + amount,
-					 len - amount);
-				  sg_offset += (len - amount);
-				  amount = len;
-				}
-			}
-		}
 
 		// Update the amount transferred and the sector number
 

drivers/usb/storage/transport.h

@@ -151,10 +151,13 @@ extern unsigned int usb_stor_transfer_length(Scsi_Cmnd*);
 extern void usb_stor_invoke_transport(Scsi_Cmnd*, struct us_data*);
 extern void usb_stor_abort_transport(struct us_data*);
 extern int usb_stor_transfer_partial(struct us_data*, char*, int);
-extern int usb_stor_bulk_msg(struct us_data*, void*, int, unsigned int,
-		unsigned int*);
-extern int usb_stor_control_msg(struct us_data*, unsigned int, u8, u8,
-		u16, u16, void*, u16);
+
+extern int usb_stor_bulk_msg(struct us_data *us, void *data, int pipe,
+		unsigned int len, unsigned int *act_len);
+extern int usb_stor_control_msg(struct us_data *us, unsigned int pipe,
+		u8 request, u8 requesttype, u16 value, u16 index,
+		void *data, u16 size);
+
 extern int usb_stor_clear_halt(struct us_data*, int );
 extern void usb_stor_transfer(Scsi_Cmnd*, struct us_data*);
 #endif