[ARM] Remove hard coded per-architecture memory, ramdisk and initrd

We have a fair number of command line options which can be used
to pass information about the target to the kernel.  We also provide
a default command line which the kernel will use in absence of one
provided by the boot loader.  We pass the hard coded options via the
command line now.

arch/arm/config.in

@@ -63,11 +63,6 @@ dep_bool '  ADS Bitsy' CONFIG_SA1100_ADSBITSY $CONFIG_ARCH_SA1100
 dep_bool '  Brutus' CONFIG_SA1100_BRUTUS $CONFIG_ARCH_SA1100
 dep_bool '  CerfBoard' CONFIG_SA1100_CERF $CONFIG_ARCH_SA1100
 if [ "$CONFIG_SA1100_CERF" = "y" ]; then
-   choice 'Cerf RAM available' \
-        "8MB   CONFIG_SA1100_CERF_8MB \
-         16MB   CONFIG_SA1100_CERF_16MB \
-         32MB   CONFIG_SA1100_CERF_32MB \
-         64MB   CONFIG_SA1100_CERF_64MB" CerfRam
    choice 'Cerf Flash available'  \
         "8MB    CONFIG_SA1100_CERF_FLASH_8MB \
          16MB   CONFIG_SA1100_CERF_FLASH_16MB \
@@ -453,7 +448,9 @@ else
 fi
 comment 'At least one math emulation must be selected'
 tristate 'NWFPE math emulation' CONFIG_FPE_NWFPE
-dep_tristate 'FastFPE math emulation (experimental)' CONFIG_FPE_FASTFPE $CONFIG_EXPERIMENTAL
+if [ "$CONFIG_CPU_26" = "n" -a "$CONFIG_CPU_32v3" = "n" ]; then
+   dep_tristate 'FastFPE math emulation (experimental)' CONFIG_FPE_FASTFPE $CONFIG_EXPERIMENTAL
+fi
 choice 'Kernel core (/proc/kcore) format' \
 	"ELF		CONFIG_KCORE_ELF	\
 	 A.OUT		CONFIG_KCORE_AOUT" ELF
@@ -494,15 +491,10 @@ if [ "$CONFIG_ARCH_NETWINDER" = "y" -o  \
    fi
 fi
 
-if [ "$CONFIG_ARCH_SA1100" = "y" ]; then
+if [ "$CONFIG_CPU_32" = "y" ]; then
    define_bool CONFIG_ALIGNMENT_TRAP y
 else
-   if [ "$CONFIG_CPU_32" = "y" -a \
-        "$CONFIG_ARCH_EBSA110" != "y" ]; then
-      bool 'Mis-alignment trap handler' CONFIG_ALIGNMENT_TRAP
-   else
    define_bool CONFIG_ALIGNMENT_TRAP n
-   fi
 fi
 endmenu
 
@@ -510,6 +502,8 @@ source drivers/parport/Config.in
 
 if [ "$CONFIG_ALIGNMENT_TRAP" = "y" ]; then
   source drivers/mtd/Config.in
+else
+  define_bool CONFIG_MTD n
 fi
 
 source drivers/pnp/Config.in

arch/arm/def-configs/adi_evb

@@ -147,7 +147,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_PM is not set
 # CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/mtdblock1"
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/mtdblock1 mem=32M initrd=0xc0800000,3M"
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -236,7 +236,7 @@ CONFIG_MTD_ADI_EVB=y
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4192
+CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_INITRD=y
 
 #

arch/arm/def-configs/adsbitsy

@@ -139,7 +139,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_PM is not set
 # CONFIG_APM is not set
 # CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="ip=off"
+CONFIG_CMDLINE="ip=off mem=32M root=/dev/ram ramdisk=8192 initrd=0xc0800000,4M"
 # CONFIG_PFS168_CMDLINE is not set
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y

arch/arm/def-configs/anakin

@@ -8,12 +8,21 @@ CONFIG_ARM=y
 CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_GENERIC_BUST_SPINLOCK is not set
+# CONFIG_GENERIC_ISA_DMA is not set
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-# CONFIG_OBSOLETE is not set
+
+#
+# General setup
+#
+CONFIG_NET=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_SYSCTL is not set
 
 #
 # Loadable module support
@@ -25,17 +34,21 @@ CONFIG_MODULES=y
 #
 # System Type
 #
+# CONFIG_ARCH_ADIFCC is not set
+CONFIG_ARCH_ANAKIN=y
 # CONFIG_ARCH_ARCA5K is not set
 # CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_CAMELOT is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP310 is not set
+# CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_CLPS711X is not set
-CONFIG_ARCH_ANAKIN=y
+# CONFIG_ARCH_SHARK is not set
 
 #
 # Archimedes/A5000 Implementations
@@ -61,12 +74,19 @@ CONFIG_ARCH_ANAKIN=y
 #
 # CONFIG_SA1100_ASSABET is not set
 # CONFIG_ASSABET_NEPONSET is not set
+# CONFIG_SA1100_ADSBITSY is not set
 # CONFIG_SA1100_BRUTUS is not set
 # CONFIG_SA1100_CERF is not set
-# CONFIG_SA1100_BITSY is not set
+# CONFIG_SA1100_H3100 is not set
+# CONFIG_SA1100_H3600 is not set
+# CONFIG_SA1100_H3800 is not set
+# CONFIG_SA1100_H3XXX is not set
 # CONFIG_SA1100_EXTENEX1 is not set
+# CONFIG_SA1100_FLEXANET is not set
 # CONFIG_SA1100_FREEBIRD is not set
 # CONFIG_SA1100_GRAPHICSCLIENT is not set
+# CONFIG_SA1100_GRAPHICSMASTER is not set
+# CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HUW_WEBPANEL is not set
 # CONFIG_SA1100_ITSY is not set
@@ -75,16 +95,31 @@ CONFIG_ARCH_ANAKIN=y
 # CONFIG_SA1100_OMNIMETER is not set
 # CONFIG_SA1100_PANGOLIN is not set
 # CONFIG_SA1100_PLEB is not set
+# CONFIG_SA1100_PT_SYSTEM3 is not set
+# CONFIG_SA1100_SHANNON is not set
 # CONFIG_SA1100_SHERMAN is not set
+# CONFIG_SA1100_SIMPAD is not set
 # CONFIG_SA1100_PFS168 is not set
 # CONFIG_SA1100_VICTOR is not set
 # CONFIG_SA1100_XP860 is not set
 # CONFIG_SA1100_YOPY is not set
+# CONFIG_SA1100_STORK is not set
+# CONFIG_SA1100_USB is not set
+# CONFIG_SA1100_USB_NETLINK is not set
+# CONFIG_SA1100_USB_CHAR is not set
+# CONFIG_H3600_SLEEVE is not set
 
 #
 # CLPS711X/EP721X Implementations
 #
+# CONFIG_ARCH_AUTCPU12 is not set
+# CONFIG_ARCH_CDB89712 is not set
+# CONFIG_ARCH_CLEP7312 is not set
+# CONFIG_ARCH_EDB7211 is not set
 # CONFIG_ARCH_P720T is not set
+# CONFIG_ARCH_FORTUNET is not set
+# CONFIG_ARCH_EP7211 is not set
+# CONFIG_ARCH_EP7212 is not set
 # CONFIG_ARCH_ACORN is not set
 # CONFIG_FOOTBRIDGE is not set
 # CONFIG_FOOTBRIDGE_HOST is not set
@@ -97,27 +132,40 @@ CONFIG_CPU_32=y
 #
 # CONFIG_CPU_32v3 is not set
 CONFIG_CPU_32v4=y
+# CONFIG_CPU_32v5 is not set
 # CONFIG_CPU_ARM610 is not set
 # CONFIG_CPU_ARM710 is not set
 # CONFIG_CPU_ARM720T is not set
 # CONFIG_CPU_ARM920T is not set
+# CONFIG_CPU_ARM922T is not set
+# CONFIG_CPU_ARM926T is not set
 # CONFIG_CPU_ARM1020 is not set
 CONFIG_CPU_SA110=y
 # CONFIG_CPU_SA1100 is not set
-# CONFIG_DISCONTIGMEM is not set
+# CONFIG_CPU_XSCALE is not set
+# CONFIG_XSCALE_PMU is not set
+
+#
+# Processor Features
+#
 
 #
 # General setup
 #
+# CONFIG_DISCONTIGMEM is not set
 # CONFIG_PCI is not set
 # CONFIG_ISA is not set
 # CONFIG_ISA_DMA is not set
+# CONFIG_FIQ is not set
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
 # CONFIG_HOTPLUG is not set
 # CONFIG_PCMCIA is not set
-CONFIG_NET=y
-# CONFIG_SYSVIPC is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
+
+#
+# At least one math emulation must be selected
+#
 CONFIG_FPE_NWFPE=y
 # CONFIG_FPE_FASTFPE is not set
 CONFIG_KCORE_ELF=y
@@ -126,20 +174,28 @@ CONFIG_BINFMT_AOUT=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_PM is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_APM is not set
 # CONFIG_ARTHUR is not set
-CONFIG_CMDLINE=""
-# CONFIG_ALIGNMENT_TRAP is not set
+CONFIG_CMDLINE="root=/dev/ram initrd=0xc0800000,4M"
+CONFIG_ALIGNMENT_TRAP=y
 
 #
 # Parallel port support
 #
 # CONFIG_PARPORT is not set
 
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
 #
 # Plug and Play configuration
 #
 # CONFIG_PNP is not set
 # CONFIG_ISAPNP is not set
+# CONFIG_PNPBIOS is not set
 
 #
 # Block devices
@@ -149,7 +205,9 @@ CONFIG_CMDLINE=""
 # CONFIG_PARIDE is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_CISS_SCSI_TAPE is not set
 # CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
@@ -165,13 +223,14 @@ CONFIG_BLK_DEV_INITRD=y
 # CONFIG_MD_RAID0 is not set
 # CONFIG_MD_RAID1 is not set
 # CONFIG_MD_RAID5 is not set
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_BLK_DEV_LVM is not set
 
 #
 # Networking options
 #
 # CONFIG_PACKET is not set
-# CONFIG_NETLINK is not set
+# CONFIG_NETLINK_DEV is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_FILTER is not set
 CONFIG_UNIX=y
@@ -181,17 +240,24 @@ CONFIG_INET=y
 # CONFIG_IP_PNP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
 # CONFIG_INET_ECN is not set
 # CONFIG_SYN_COOKIES is not set
 # CONFIG_IPV6 is not set
 # CONFIG_KHTTPD is not set
 # CONFIG_ATM is not set
+# CONFIG_VLAN_8021Q is not set
 
 #
 #  
 #
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
+
+#
+# Appletalk devices
+#
+# CONFIG_DEV_APPLETALK is not set
 # CONFIG_DECNET is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_X25 is not set
@@ -229,7 +295,13 @@ CONFIG_IRDA=y
 # CONFIG_IRLAN is not set
 # CONFIG_IRCOMM is not set
 # CONFIG_IRDA_ULTRA is not set
-# CONFIG_IRDA_OPTIONS is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
 
 #
 # Infrared-port device drivers
@@ -241,25 +313,26 @@ CONFIG_IRDA=y
 CONFIG_IRTTY_SIR=y
 # CONFIG_IRPORT_SIR is not set
 
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+
 #
 # FIR device drivers
 #
+# CONFIG_USB_IRDA is not set
 # CONFIG_NSC_FIR is not set
 # CONFIG_WINBOND_FIR is not set
 # CONFIG_TOSHIBA_FIR is not set
 # CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_SA1100_FIR is not set
-
-#
-# Dongle support
-#
-# CONFIG_DONGLE is not set
+# CONFIG_ALI_FIR is not set
+# CONFIG_VLSI_FIR is not set
 
 #
 # ATA/IDE/MFM/RLL support
 #
 # CONFIG_IDE is not set
-# CONFIG_BLK_DEV_IDE_MODES is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -279,27 +352,73 @@ CONFIG_IRTTY_SIR=y
 #
 # ISDN subsystem
 #
-# CONFIG_ISDN is not set
+# CONFIG_ISDN_BOOL is not set
 
 #
-# Input core support
+# Input device support
 #
 # CONFIG_INPUT is not set
+# CONFIG_INPUT_KEYBDEV is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+# CONFIG_GAMEPORT_NS558 is not set
+# CONFIG_GAMEPORT_L4 is not set
+# CONFIG_INPUT_EMU10K1 is not set
+# CONFIG_GAMEPORT_PCIGAME is not set
+# CONFIG_GAMEPORT_FM801 is not set
+# CONFIG_GAMEPORT_CS461x is not set
+# CONFIG_SERIO is not set
+# CONFIG_SERIO_SERPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
 # CONFIG_VT_CONSOLE is not set
-# CONFIG_SERIAL is not set
 # CONFIG_SERIAL_EXTENDED is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+# CONFIG_SERIAL_8250_CONSOLE is not set
+# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+# CONFIG_SERIAL_8250_SHARE_IRQ is not set
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_MULTIPORT is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+
+#
+# ARM Serial drivers
+#
+# CONFIG_ATOMWIDE_SERIAL is not set
+# CONFIG_DUALSP_SERIAL is not set
 CONFIG_SERIAL_ANAKIN=y
 CONFIG_SERIAL_ANAKIN_CONSOLE=y
 CONFIG_ANAKIN_DEFAULT_BAUDRATE=115200
-CONFIG_TOUCHSCREEN_ANAKIN=y
+# CONFIG_SERIAL_AMBA is not set
+# CONFIG_SERIAL_AMBA_CONSOLE is not set
+# CONFIG_SERIAL_CLPS711X is not set
+# CONFIG_SERIAL_CLPS711X_CONSOLE is not set
+# CONFIG_SERIAL_21285 is not set
+# CONFIG_SERIAL_21285_OLD is not set
+# CONFIG_SERIAL_21285_CONSOLE is not set
+# CONFIG_SERIAL_UART00 is not set
+# CONFIG_SERIAL_UART00_CONSOLE is not set
+# CONFIG_SERIAL_SA1100 is not set
+# CONFIG_SERIAL_SA1100_CONSOLE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_TOUCHSCREEN_ANAKIN=y
 # CONFIG_UNIX98_PTYS is not set
 
 #
@@ -308,19 +427,23 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_I2C is not set
 
 #
-# Mice
+# L3 serial bus support
 #
-# CONFIG_BUSMOUSE is not set
-# CONFIG_MOUSE is not set
+# CONFIG_L3 is not set
+# CONFIG_L3_ALGOBIT is not set
+# CONFIG_L3_BIT_SA1100_GPIO is not set
 
 #
-# Joysticks
+# Other L3 adapters
 #
-# CONFIG_JOYSTICK is not set
+# CONFIG_L3_SA1111 is not set
+# CONFIG_BIT_SA1100_GPIO is not set
 
 #
-# Input core support is needed for joysticks
+# Mice
 #
+# CONFIG_BUSMOUSE is not set
+# CONFIG_MOUSE is not set
 # CONFIG_QIC02_TAPE is not set
 
 #
@@ -350,27 +473,40 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # File systems
 #
 # CONFIG_QUOTA is not set
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+# CONFIG_QIFACE_COMPAT is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
 # CONFIG_ADFS_FS is not set
 # CONFIG_ADFS_FS_RW is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_BFS_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_JBD_DEBUG is not set
 # CONFIG_FAT_FS is not set
 # CONFIG_MSDOS_FS is not set
 # CONFIG_UMSDOS_FS is not set
 # CONFIG_VFAT_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_TMPFS is not set
-# CONFIG_RAMFS is not set
+CONFIG_RAMFS=y
 # CONFIG_ISO9660_FS is not set
 # CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_VXFS_FS is not set
 # CONFIG_NTFS_FS is not set
 # CONFIG_NTFS_DEBUG is not set
 # CONFIG_HPFS_FS is not set
@@ -384,7 +520,6 @@ CONFIG_PROC_FS=y
 # CONFIG_ROMFS_FS is not set
 CONFIG_EXT2_FS=y
 # CONFIG_SYSV_FS is not set
-# CONFIG_SYSV_FS_WRITE is not set
 # CONFIG_UDF_FS is not set
 # CONFIG_UDF_RW is not set
 # CONFIG_UFS_FS is not set
@@ -394,13 +529,16 @@ CONFIG_EXT2_FS=y
 # Network File Systems
 #
 # CONFIG_CODA_FS is not set
+# CONFIG_INTERMEZZO_FS is not set
 # CONFIG_NFS_FS is not set
 # CONFIG_NFS_V3 is not set
 # CONFIG_ROOT_NFS is not set
 # CONFIG_NFSD is not set
 # CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_TCP is not set
 # CONFIG_SUNRPC is not set
 # CONFIG_LOCKD is not set
+# CONFIG_EXPORTFS is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_NCPFS_PACKET_SIGNING is not set
@@ -411,12 +549,12 @@ CONFIG_EXT2_FS=y
 # CONFIG_NCPFS_SMALLDOS is not set
 # CONFIG_NCPFS_NLS is not set
 # CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_ZISOFS_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
 # CONFIG_SMB_NLS is not set
 # CONFIG_NLS is not set
 
@@ -425,7 +563,6 @@ CONFIG_MSDOS_PARTITION=y
 #
 CONFIG_PC_KEYMAP=y
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_FB=y
 
 #
 # Frame-buffer support
@@ -433,11 +570,10 @@ CONFIG_FB=y
 CONFIG_FB=y
 CONFIG_DUMMY_CONSOLE=y
 # CONFIG_FB_ACORN is not set
+CONFIG_FB_ANAKIN=y
 # CONFIG_FB_CLPS711X is not set
-# CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_SA1100 is not set
-CONFIG_FB_ANAKIN=y
-# CONFIG_FB_E1355 is not set
+# CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FBCON_ADVANCED is not set
 CONFIG_FBCON_CFB16=y
@@ -446,20 +582,50 @@ CONFIG_FBCON_CFB16=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 
+#
+# Multimedia Capabilities Port drivers
+#
+# CONFIG_MCP is not set
+# CONFIG_MCP_SA1100 is not set
+# CONFIG_MCP_UCB1200 is not set
+# CONFIG_MCP_UCB1200_AUDIO is not set
+# CONFIG_MCP_UCB1200_TS is not set
+
+#
+# Console Switches
+#
+# CONFIG_SWITCHES is not set
+
 #
 # USB support
 #
 # CONFIG_USB is not set
 
+#
+# Bluetooth support
+#
+# CONFIG_BLUEZ is not set
+
 #
 # Kernel hacking
 #
 # CONFIG_NO_FRAME_POINTER is not set
-CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_SLAB is not set
 # CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_NO_PGT_CACHE is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_ERRORS is not set
 # CONFIG_DEBUG_LL is not set
 # CONFIG_DEBUG_DC21285_PORT is not set
 # CONFIG_DEBUG_CLPS711X_UART2 is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC32 is not set
+# CONFIG_ZLIB_INFLATE is not set
+# CONFIG_ZLIB_DEFLATE is not set

arch/arm/def-configs/assabet

@@ -157,7 +157,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_PM=y
 # CONFIG_ARTHUR is not set
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="mem=32M console=ttySA0,38400n8 initrd=0xc0800000,3M root=/dev/ram"
 CONFIG_LEDS=y
 CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
@@ -834,6 +834,13 @@ CONFIG_MCP_UCB1200=y
 CONFIG_MCP_UCB1200_AUDIO=m
 CONFIG_MCP_UCB1200_TS=y
 
+#
+# Console Switches
+#
+CONFIG_SWITCHES=y
+CONFIG_SWITCHES_SA1100=y
+CONFIG_SWITCHES_UCB1X00=y
+
 #
 # USB support
 #

arch/arm/def-configs/badge4

@@ -527,7 +527,6 @@ CONFIG_BLK_DEV_IDECD=m
 # CONFIG_BLK_DEV_IDETAPE is not set
 CONFIG_BLK_DEV_IDEFLOPPY=m
 CONFIG_BLK_DEV_IDESCSI=m
-# CONFIG_IDE_TASK_IOCTL is not set
 
 #
 # IDE chipset support/bugfixes

arch/arm/def-configs/brutus

@@ -76,7 +76,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_PM is not set
 # CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="keepinitrd"
+CONFIG_CMDLINE="mem=4M@0xc0000000 mem=4M@0xc8000000 mem=4M@0xd0000000 mem=4M@0xd8000000 keepinitrd root=/dev/ram ramdisk=8192 initrd=0xd8000000,3M"
 CONFIG_LEDS=y
 CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y

arch/arm/def-configs/cerfcube

@@ -65,10 +65,6 @@ CONFIG_ARCH_SA1100=y
 # CONFIG_SA1100_ADSBITSY is not set
 # CONFIG_SA1100_BRUTUS is not set
 CONFIG_SA1100_CERF=y
-# CONFIG_SA1100_CERF_8MB is not set
-# CONFIG_SA1100_CERF_16MB is not set
-CONFIG_SA1100_CERF_32MB=y
-# CONFIG_SA1100_CERF_64MB is not set
 # CONFIG_SA1100_CERF_FLASH_8MB is not set
 CONFIG_SA1100_CERF_FLASH_16MB=y
 # CONFIG_SA1100_CERF_FLASH_32MB is not set
@@ -163,7 +159,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_PM is not set
 # CONFIG_APM is not set
 # CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="console=ttySA0 root=1f03 rw"
+CONFIG_CMDLINE="console=ttySA0 root=/dev/mtdblock3 rw mem=32M"
 # CONFIG_PFS168_CMDLINE is not set
 CONFIG_LEDS=y
 CONFIG_LEDS_TIMER=y

arch/arm/def-configs/cerfpda

@@ -65,10 +65,6 @@ CONFIG_ARCH_SA1100=y
 # CONFIG_SA1100_ADSBITSY is not set
 # CONFIG_SA1100_BRUTUS is not set
 CONFIG_SA1100_CERF=y
-# CONFIG_SA1100_CERF_8MB is not set
-# CONFIG_SA1100_CERF_16MB is not set
-# CONFIG_SA1100_CERF_32MB is not set
-CONFIG_SA1100_CERF_64MB=y
 # CONFIG_SA1100_CERF_FLASH_8MB is not set
 # CONFIG_SA1100_CERF_FLASH_16MB is not set
 CONFIG_SA1100_CERF_FLASH_32MB=y
@@ -163,7 +159,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_PM is not set
 # CONFIG_APM is not set
 # CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="console=ttySA0 cpufreq_max=221200 root=1f03 rw"
+CONFIG_CMDLINE="console=ttySA0 cpufreq_max=221200 root=/dev/mtdblock3 rw mem=64M"
 # CONFIG_PFS168_CMDLINE is not set
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y

arch/arm/def-configs/cerfpod

@@ -65,10 +65,6 @@ CONFIG_ARCH_SA1100=y
 # CONFIG_SA1100_ADSBITSY is not set
 # CONFIG_SA1100_BRUTUS is not set
 CONFIG_SA1100_CERF=y
-# CONFIG_SA1100_CERF_8MB is not set
-# CONFIG_SA1100_CERF_16MB is not set
-CONFIG_SA1100_CERF_32MB=y
-# CONFIG_SA1100_CERF_64MB is not set
 # CONFIG_SA1100_CERF_FLASH_8MB is not set
 CONFIG_SA1100_CERF_FLASH_16MB=y
 # CONFIG_SA1100_CERF_FLASH_32MB is not set
@@ -163,7 +159,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_PM is not set
 # CONFIG_APM is not set
 # CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="console=ttySA0 root=1f03 rw"
+CONFIG_CMDLINE="console=ttySA0 root=/dev/mtdblock3 rw mem=32M"
 # CONFIG_PFS168_CMDLINE is not set
 CONFIG_LEDS=y
 CONFIG_LEDS_TIMER=y

arch/arm/def-configs/empeg

@@ -56,7 +56,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_ARTHUR is not set
 # CONFIG_PARPORT is not set
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="mem=4M@0xc0000000 mem=4M@0xc8000000 root=/dev/hda1 initrd=0xd00b0000,320K"
 
 #
 # Plug and Play support

arch/arm/def-configs/epxa10db

@@ -156,7 +156,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_PM is not set
 # CONFIG_APM is not set
 # CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="console=ttyUA0,38400 root=/dev/mtdblock0 rw"
+CONFIG_CMDLINE="mem=32M console=ttyUA0,38400 root=/dev/mtdblock0 rw"
 CONFIG_ALIGNMENT_TRAP=y
 
 #

arch/arm/def-configs/flexanet

@@ -162,7 +162,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_PM=y
 # CONFIG_ARTHUR is not set
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="mem=64M root=/dev/ram initrd=0xc0800000,3M"
 CONFIG_LEDS=y
 CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
@@ -263,7 +263,7 @@ CONFIG_MTD_SA1100=y
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_INITRD=y
 
 #

arch/arm/def-configs/freebird

@@ -131,7 +131,7 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PM=y
 CONFIG_APM=y
 # CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="mem=32M"
+CONFIG_CMDLINE="mem=32M root=/dev/ram initrd=0xc0800000,3M"
 # CONFIG_PFS168_CMDLINE is not set
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
@@ -202,7 +202,7 @@ CONFIG_MTD_BLOCK=y
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_INITRD=y
 
 #

arch/arm/def-configs/freebird_new

@@ -131,7 +131,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_PM=y
 CONFIG_APM=y
 # CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="noinitrd console=ttySA0 init=/linuxrc root=1f04 mem=32m"
+CONFIG_CMDLINE="noinitrd console=ttySA0 init=/linuxrc root=/dev/mtdblock4 mem=32m"
 # CONFIG_PFS168_CMDLINE is not set
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y

arch/arm/def-configs/graphicsclient

@@ -146,7 +146,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_PM is not set
 # CONFIG_APM is not set
 # CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="ip=off"
+CONFIG_CMDLINE="ip=off mem=16M@0xc0000000 mem=16M@0xc8000000 root=/dev/ram initrd=0xc0800000,4M"
 # CONFIG_PFS168_CMDLINE is not set
 CONFIG_LEDS=y
 CONFIG_LEDS_TIMER=y

arch/arm/def-configs/graphicsmaster

@@ -139,7 +139,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_PM is not set
 # CONFIG_APM is not set
 # CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="ip=off"
+CONFIG_CMDLINE="ip=off mem=16M@0xc0000000 mem=16M@0xc8000000 root=/dev/ram initrd=0xc0800000,4M"
 # CONFIG_PFS168_CMDLINE is not set
 CONFIG_LEDS=y
 CONFIG_LEDS_TIMER=y

arch/arm/def-configs/huw_webpanel

@@ -96,7 +96,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_PM is not set
 # CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="keepinitrd"
+CONFIG_CMDLINE="keepinitrd mem=32480K root=/dev/ram initrd=0xc0800000,8M"
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
 
@@ -167,7 +167,7 @@ CONFIG_MTD_BLOCK=y
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_BLK_DEV_FLASH is not set
 

arch/arm/def-configs/iq80310

@@ -161,7 +161,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_PM is not set
 # CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="console=ttyS0,115200 ip=bootp"
+CONFIG_CMDLINE="console=ttyS0,115200 ip=bootp mem=32M root=/dev/nfs initrd=0xc0800000,4M"
 CONFIG_ALIGNMENT_TRAP=y
 
 #

arch/arm/def-configs/jornada720

@@ -158,7 +158,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_PM=y
 # CONFIG_APM is not set
 # CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="keepinitrd"
+CONFIG_CMDLINE="keepinitrd mem=32M"
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
 

arch/arm/def-configs/lusl7200

@@ -2,7 +2,14 @@
 # Automatically generated make config: don't edit
 #
 CONFIG_ARM=y
+# CONFIG_EISA is not set
+# CONFIG_SBUS is not set
+# CONFIG_MCA is not set
 CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_GENERIC_BUST_SPINLOCK is not set
+# CONFIG_GENERIC_ISA_DMA is not set
 
 #
 # Code maturity level options
@@ -10,50 +17,169 @@ CONFIG_UID16=y
 CONFIG_EXPERIMENTAL=y
 
 #
-# System and Processor Type
+# General setup
 #
-# CONFIG_ARCH_ARC is not set
-# CONFIG_ARCH_A5K is not set
-# CONFIG_ARCH_RPC is not set
+# CONFIG_NET is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_SYSCTL=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODVERSIONS is not set
+CONFIG_KMOD=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_ADIFCC is not set
+# CONFIG_ARCH_ANAKIN is not set
+# CONFIG_ARCH_ARCA5K is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
-# CONFIG_FOOTBRIDGE is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP310 is not set
 CONFIG_ARCH_L7200=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_SHARK is not set
+
+#
+# Archimedes/A5000 Implementations
+#
+
+#
+# Archimedes/A5000 Implementations (select only ONE)
+#
+# CONFIG_ARCH_ARC is not set
+# CONFIG_ARCH_A5K is not set
+
+#
+# Footbridge Implementations
+#
+# CONFIG_ARCH_CATS is not set
+# CONFIG_ARCH_PERSONAL_SERVER is not set
+# CONFIG_ARCH_EBSA285_ADDIN is not set
+# CONFIG_ARCH_EBSA285_HOST is not set
+# CONFIG_ARCH_NETWINDER is not set
+
+#
+# SA11x0 Implementations
+#
+# CONFIG_SA1100_ASSABET is not set
+# CONFIG_ASSABET_NEPONSET is not set
+# CONFIG_SA1100_ADSBITSY is not set
+# CONFIG_SA1100_BRUTUS is not set
+# CONFIG_SA1100_CERF is not set
+# CONFIG_SA1100_H3100 is not set
+# CONFIG_SA1100_H3600 is not set
+# CONFIG_SA1100_H3800 is not set
+# CONFIG_SA1100_H3XXX is not set
+# CONFIG_SA1100_EXTENEX1 is not set
+# CONFIG_SA1100_FLEXANET is not set
+# CONFIG_SA1100_FREEBIRD is not set
+# CONFIG_SA1100_GRAPHICSCLIENT is not set
+# CONFIG_SA1100_GRAPHICSMASTER is not set
+# CONFIG_SA1100_BADGE4 is not set
+# CONFIG_SA1100_JORNADA720 is not set
+# CONFIG_SA1100_HUW_WEBPANEL is not set
+# CONFIG_SA1100_ITSY is not set
+# CONFIG_SA1100_LART is not set
+# CONFIG_SA1100_NANOENGINE is not set
+# CONFIG_SA1100_OMNIMETER is not set
+# CONFIG_SA1100_PANGOLIN is not set
+# CONFIG_SA1100_PLEB is not set
+# CONFIG_SA1100_PT_SYSTEM3 is not set
+# CONFIG_SA1100_SHANNON is not set
+# CONFIG_SA1100_SHERMAN is not set
+# CONFIG_SA1100_SIMPAD is not set
+# CONFIG_SA1100_PFS168 is not set
+# CONFIG_SA1100_VICTOR is not set
+# CONFIG_SA1100_XP860 is not set
+# CONFIG_SA1100_YOPY is not set
+# CONFIG_SA1100_STORK is not set
+# CONFIG_SA1100_USB is not set
+# CONFIG_SA1100_USB_NETLINK is not set
+# CONFIG_SA1100_USB_CHAR is not set
+# CONFIG_H3600_SLEEVE is not set
+
+#
+# CLPS711X/EP721X Implementations
+#
+# CONFIG_ARCH_AUTCPU12 is not set
+# CONFIG_ARCH_CDB89712 is not set
+# CONFIG_ARCH_CLEP7312 is not set
+# CONFIG_ARCH_EDB7211 is not set
+# CONFIG_ARCH_P720T is not set
+# CONFIG_ARCH_FORTUNET is not set
+# CONFIG_ARCH_EP7211 is not set
+# CONFIG_ARCH_EP7212 is not set
 # CONFIG_ARCH_ACORN is not set
+# CONFIG_FOOTBRIDGE is not set
+# CONFIG_FOOTBRIDGE_HOST is not set
+# CONFIG_FOOTBRIDGE_ADDIN is not set
 CONFIG_CPU_32=y
 # CONFIG_CPU_26 is not set
+
+#
+# Processor Type
+#
+# CONFIG_CPU_32v3 is not set
 CONFIG_CPU_32v4=y
-CONFIG_CPU_ARM720=y
-CONFIG_ZBOOT_ROM=y
-CONFIG_ZBOOT_ROM_TEXT=0x00010000
-CONFIG_ZBOOT_ROM_BSS=0xf03e0000
-# CONFIG_PCI is not set
-# CONFIG_ISA is not set
-# CONFIG_ISA_DMA is not set
-# CONFIG_SBUS is not set
-# CONFIG_PCMCIA is not set
-# CONFIG_ALIGNMENT_TRAP is not set
+# CONFIG_CPU_32v5 is not set
+# CONFIG_CPU_ARM610 is not set
+# CONFIG_CPU_ARM710 is not set
+CONFIG_CPU_ARM720T=y
+# CONFIG_CPU_ARM920T is not set
+# CONFIG_CPU_ARM922T is not set
+# CONFIG_CPU_ARM926T is not set
+# CONFIG_CPU_ARM1020 is not set
+# CONFIG_CPU_SA110 is not set
+# CONFIG_CPU_SA1100 is not set
+# CONFIG_CPU_XSCALE is not set
+# CONFIG_XSCALE_PMU is not set
 
 #
-# Loadable module support
+# Processor Features
 #
-CONFIG_MODULES=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
+# CONFIG_ARM_THUMB is not set
 
 #
 # General setup
 #
-# CONFIG_NET is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_SYSCTL=y
-CONFIG_NWFPE=y
+# CONFIG_DISCONTIGMEM is not set
+# CONFIG_PCI is not set
+# CONFIG_ISA is not set
+# CONFIG_ISA_DMA is not set
+CONFIG_FIQ=y
+CONFIG_ZBOOT_ROM=y
+CONFIG_ZBOOT_ROM_TEXT=00010000
+CONFIG_ZBOOT_ROM_BSS=f03e0000
+# CONFIG_HOTPLUG is not set
+# CONFIG_PCMCIA is not set
+
+#
+# At least one math emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
 CONFIG_KCORE_ELF=y
 # CONFIG_KCORE_AOUT is not set
 CONFIG_BINFMT_AOUT=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+# CONFIG_PM is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_APM is not set
 # CONFIG_ARTHUR is not set
+CONFIG_CMDLINE="console=tty0 console=ttyLU1,115200 root=/dev/ram initrd=0xf1000000,0x005dac7b mem=32M"
+CONFIG_ALIGNMENT_TRAP=y
 
 #
 # Parallel port support
@@ -61,18 +187,16 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_PARPORT is not set
 
 #
-# I2O device support
+# Memory Technology Devices (MTD)
 #
-# CONFIG_I2O is not set
-# CONFIG_I2O_BLOCK is not set
-# CONFIG_I2O_SCSI is not set
-# CONFIG_I2O_PROC is not set
+# CONFIG_MTD is not set
 
 #
 # Plug and Play configuration
 #
 # CONFIG_PNP is not set
 # CONFIG_ISAPNP is not set
+# CONFIG_PNPBIOS is not set
 
 #
 # Block devices
@@ -81,28 +205,79 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BLK_DEV_XD is not set
 # CONFIG_PARIDE is not set
 # CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_CISS_SCSI_TAPE is not set
 # CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_LVM is not set
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_MD_LINEAR is not set
-# CONFIG_MD_STRIPED is not set
 CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
 
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+# CONFIG_BLK_DEV_MD is not set
+# CONFIG_MD_LINEAR is not set
+# CONFIG_MD_RAID0 is not set
+# CONFIG_MD_RAID1 is not set
+# CONFIG_MD_RAID5 is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_BLK_DEV_LVM is not set
+
+#
+# ATA/IDE/MFM/RLL support
+#
+# CONFIG_IDE is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI support
+#
+# CONFIG_SCSI is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+# CONFIG_I2O_BLOCK is not set
+# CONFIG_I2O_SCSI is not set
+# CONFIG_I2O_PROC is not set
+
+#
+# ISDN subsystem
+#
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+# CONFIG_INPUT_KEYBDEV is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+# CONFIG_GAMEPORT_NS558 is not set
+# CONFIG_GAMEPORT_L4 is not set
+# CONFIG_INPUT_EMU10K1 is not set
+# CONFIG_GAMEPORT_PCIGAME is not set
+# CONFIG_GAMEPORT_FM801 is not set
+# CONFIG_GAMEPORT_CS461x is not set
+# CONFIG_SERIO is not set
+# CONFIG_SERIO_SERPORT is not set
+
 #
 # Character devices
 #
 # CONFIG_VT is not set
-# CONFIG_SERIAL is not set
 # CONFIG_SERIAL_EXTENDED is not set
 CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
-CONFIG_SERIAL_L7200=y
-CONFIG_SERIAL_L7200_CONSOLE=y
 # CONFIG_DIGIEPCA is not set
 # CONFIG_DIGI is not set
 # CONFIG_ESPSERIAL is not set
@@ -110,11 +285,48 @@ CONFIG_SERIAL_L7200_CONSOLE=y
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINK is not set
+# CONFIG_SYNCLINKMP is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_RISCOM8 is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_SX is not set
+# CONFIG_RIO is not set
 # CONFIG_STALDRV is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+# CONFIG_SERIAL_8250_CONSOLE is not set
+# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+# CONFIG_SERIAL_8250_SHARE_IRQ is not set
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_MULTIPORT is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+
+#
+# ARM Serial drivers
+#
+# CONFIG_ATOMWIDE_SERIAL is not set
+# CONFIG_DUALSP_SERIAL is not set
+# CONFIG_SERIAL_ANAKIN is not set
+# CONFIG_SERIAL_ANAKIN_CONSOLE is not set
+# CONFIG_SERIAL_AMBA is not set
+# CONFIG_SERIAL_AMBA_CONSOLE is not set
+# CONFIG_SERIAL_CLPS711X is not set
+# CONFIG_SERIAL_CLPS711X_CONSOLE is not set
+# CONFIG_SERIAL_21285 is not set
+# CONFIG_SERIAL_21285_OLD is not set
+# CONFIG_SERIAL_21285_CONSOLE is not set
+# CONFIG_SERIAL_UART00 is not set
+# CONFIG_SERIAL_UART00_CONSOLE is not set
+# CONFIG_SERIAL_SA1100 is not set
+# CONFIG_SERIAL_SA1100_CONSOLE is not set
 # CONFIG_UNIX98_PTYS is not set
 
 #
@@ -123,28 +335,32 @@ CONFIG_SERIAL_L7200_CONSOLE=y
 # CONFIG_I2C is not set
 
 #
-# Mice
+# L3 serial bus support
 #
-# CONFIG_BUSMOUSE is not set
-# CONFIG_MOUSE is not set
+# CONFIG_L3 is not set
+# CONFIG_L3_ALGOBIT is not set
+# CONFIG_L3_BIT_SA1100_GPIO is not set
 
 #
-# Joysticks
+# Other L3 adapters
+#
+# CONFIG_L3_SA1111 is not set
+# CONFIG_BIT_SA1100_GPIO is not set
+
+#
+# Mice
 #
-# CONFIG_JOYSTICK is not set
+# CONFIG_BUSMOUSE is not set
+# CONFIG_MOUSE is not set
 # CONFIG_QIC02_TAPE is not set
 
 #
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_INTEL_RNG is not set
 # CONFIG_NVRAM is not set
 # CONFIG_RTC is not set
-
-#
-# Video For Linux
-#
-# CONFIG_VIDEO_DEV is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -153,48 +369,58 @@ CONFIG_SERIAL_L7200_CONSOLE=y
 # Ftape, the floppy tape device driver
 #
 # CONFIG_FTAPE is not set
-# CONFIG_DRM is not set
-# CONFIG_DRM_TDFX is not set
 # CONFIG_AGP is not set
+# CONFIG_DRM is not set
 
 #
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-# CONFIG_BLK_DEV_IDE_MODES is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI support
+# Multimedia devices
 #
-# CONFIG_SCSI is not set
+# CONFIG_VIDEO_DEV is not set
 
 #
 # File systems
 #
 # CONFIG_QUOTA is not set
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+# CONFIG_QIFACE_COMPAT is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
 # CONFIG_ADFS_FS is not set
 # CONFIG_ADFS_FS_RW is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_BFS_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_JBD_DEBUG is not set
 # CONFIG_FAT_FS is not set
 # CONFIG_MSDOS_FS is not set
 # CONFIG_UMSDOS_FS is not set
 # CONFIG_VFAT_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
-# CONFIG_RAMFS is not set
+# CONFIG_TMPFS is not set
+CONFIG_RAMFS=y
 # CONFIG_ISO9660_FS is not set
 # CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_VXFS_FS is not set
 # CONFIG_NTFS_FS is not set
 # CONFIG_NTFS_DEBUG is not set
 # CONFIG_HPFS_FS is not set
 CONFIG_PROC_FS=y
 # CONFIG_DEVFS_FS is not set
+# CONFIG_DEVFS_MOUNT is not set
 # CONFIG_DEVFS_DEBUG is not set
 # CONFIG_DEVPTS_FS is not set
 # CONFIG_QNX4FS_FS is not set
@@ -202,20 +428,35 @@ CONFIG_PROC_FS=y
 # CONFIG_ROMFS_FS is not set
 CONFIG_EXT2_FS=y
 # CONFIG_SYSV_FS is not set
-# CONFIG_SYSV_FS_WRITE is not set
 # CONFIG_UDF_FS is not set
 # CONFIG_UDF_RW is not set
 # CONFIG_UFS_FS is not set
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_NCPFS_NLS is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_ZISOFS_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
+# CONFIG_SMB_NLS is not set
 # CONFIG_NLS is not set
 
+#
+# Multimedia Capabilities Port drivers
+#
+# CONFIG_MCP is not set
+# CONFIG_MCP_SA1100 is not set
+# CONFIG_MCP_UCB1200 is not set
+# CONFIG_MCP_UCB1200_AUDIO is not set
+# CONFIG_MCP_UCB1200_TS is not set
+
+#
+# Console Switches
+#
+# CONFIG_SWITCHES is not set
+
 #
 # USB support
 #
@@ -224,9 +465,23 @@ CONFIG_MSDOS_PARTITION=y
 #
 # Kernel hacking
 #
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_ERRORS=y
+# CONFIG_NO_FRAME_POINTER is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_SLAB is not set
 # CONFIG_MAGIC_SYSRQ is not set
-CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_WAITQ is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_DEBUG_DC21285_PORT is not set
+# CONFIG_DEBUG_CLPS711X_UART2 is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC32 is not set
+# CONFIG_ZLIB_INFLATE is not set
+# CONFIG_ZLIB_DEFLATE is not set

arch/arm/def-configs/neponset

@@ -820,6 +820,13 @@ CONFIG_MCP_UCB1200=y
 CONFIG_MCP_UCB1200_AUDIO=m
 CONFIG_MCP_UCB1200_TS=y
 
+#
+# Console Switches
+#
+CONFIG_SWITCHES=y
+CONFIG_SWITCHES_SA1100=y
+CONFIG_SWITCHES_UCB1X00=y
+
 #
 # USB support
 #

arch/arm/def-configs/omnimeter

@@ -100,7 +100,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_PM is not set
 # CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="keepinitrd"
+CONFIG_CMDLINE="keepinitrd mem=16M root=/dev/ram ramdisk=8192 initrd=0xd0000000,4M"
 # CONFIG_LEDS is not set
 # CONFIG_ALIGNMENT_TRAP is not set
 

arch/arm/def-configs/pangolin

@@ -137,7 +137,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_PM is not set
 # CONFIG_APM is not set
 # CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="keepinitrd"
+CONFIG_CMDLINE="keepinitrd mem=128M root=/dev/ram initrd=0xc0800000,3M"
 # CONFIG_PFS168_CMDLINE is not set
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
@@ -249,7 +249,7 @@ CONFIG_MTD_SA1100=y
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_SIZE=16384
 CONFIG_BLK_DEV_INITRD=y
 
 #

arch/arm/def-configs/pfs168_mqtft

@@ -140,8 +140,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_PM is not set
 # CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="root=/dev/nfs"
-# CONFIG_PFS168_CMDLINE is not set
+CONFIG_CMDLINE="root=/dev/nfs mem=16M"
 CONFIG_LEDS=y
 CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y

arch/arm/def-configs/pfs168_mqvga

@@ -140,8 +140,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_PM is not set
 # CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="root=/dev/nfs"
-# CONFIG_PFS168_CMDLINE is not set
+CONFIG_CMDLINE="root=/dev/nfs mem=16M"
 CONFIG_LEDS=y
 CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y

arch/arm/def-configs/pfs168_sastn

@@ -140,8 +140,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_PM is not set
 # CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="root=/dev/nfs"
-# CONFIG_PFS168_CMDLINE is not set
+CONFIG_CMDLINE="root=/dev/nfs mem=16M"
 CONFIG_LEDS=y
 CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y

arch/arm/def-configs/pfs168_satft

@@ -140,8 +140,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_PM is not set
 # CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="root=/dev/nfs"
-# CONFIG_PFS168_CMDLINE is not set
+CONFIG_CMDLINE="root=/dev/nfs mem=16M"
 CONFIG_LEDS=y
 CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y

arch/arm/def-configs/pleb

@@ -126,7 +126,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_PM is not set
 # CONFIG_APM is not set
 # CONFIG_ARTHUR is not set
-CONFIG_CMDLINE="console=ttySA0,9600"
+CONFIG_CMDLINE="console=ttySA0,9600 mem=16M@0xc0000000 mem=16M@0xc8000000 root=/dev/ram initrd=0xc0400000,4M"
 # CONFIG_PFS168_CMDLINE is not set
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
@@ -213,7 +213,7 @@ CONFIG_ALIGNMENT_TRAP=y
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_INITRD=y
 
 #

arch/arm/def-configs/sherman

@@ -60,7 +60,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_ARTHUR is not set
 # CONFIG_PARPORT is not set
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="mem=64M@0xc0000000 mem=64M@0xc8000000 root=/dev/mtdblock2"
 
 #
 # Plug and Play support

arch/arm/kernel/setup.c

@@ -341,7 +341,7 @@ parse_cmdline(struct meminfo *mi, char **cmdline_p, char *from)
 	*cmdline_p = command_line;
 }
 
-void __init
+static void __init
 setup_ramdisk(int doload, int prompt, int image_start, unsigned int rd_sz)
 {
 #ifdef CONFIG_BLK_DEV_RAM
@@ -359,7 +359,7 @@ setup_ramdisk(int doload, int prompt, int image_start, unsigned int rd_sz)
 /*
  * initial ram disk
  */
-void __init setup_initrd(unsigned int start, unsigned int size)
+static void __init setup_initrd(unsigned int start, unsigned int size)
 {
 #ifdef CONFIG_BLK_DEV_INITRD
 	if (start == 0)

arch/arm/mach-adifcc/arch.c

@@ -21,27 +21,10 @@
 extern void adifcc_map_io(void);
 extern void adifcc_init_irq(void);
 
-static void __init
-fixup_adifcc(struct machine_desc *desc, struct tag *tags,
-	      char **cmdline, struct meminfo *mi)
-{
-#ifdef CONFIG_ARCH_ADI_EVB
-	mi->bank[0].start = PHYS_OFFSET;
-	mi->bank[0].size  = (32*1024*1024);
-	mi->bank[0].node  = 0;
-	mi->nr_banks      = 1;
-
-	setup_ramdisk( 1, 0, 0, 8192 );
-	setup_initrd( 0xc0800000, 3*1024*1024 );
-	ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
-#endif
-}
-
 #ifdef CONFIG_ARCH_ADI_EVB
 MACHINE_START(ADI_EVB, "ADI 80200FCC Evaluation Board")
 	MAINTAINER("MontaVista Software Inc.")
 	BOOT_MEM(0xc0000000, 0x00400000, 0xff400000)
-	FIXUP(fixup_adifcc)
 	MAPIO(adifcc_map_io)
 	INITIRQ(adifcc_init_irq)
 MACHINE_END

arch/arm/mach-anakin/arch.c

@@ -19,28 +19,13 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#ifndef CONFIG_BLK_DEV_RAM_SIZE
-#define CONFIG_BLK_DEV_RAM_SIZE	4096
-#endif
-
 extern void anakin_map_io(void);
 extern void genarch_init_irq(void);
 
-static void __init
-fixup_anakin(struct machine_desc *desc, struct tag *tag,
-             char **cmdline, struct meminfo *mi)
-{
-	ROOT_DEV = mk_kdev(RAMDISK_MAJOR, 0);
-	setup_ramdisk(1, 0, 0, CONFIG_BLK_DEV_RAM_SIZE);
-	setup_initrd(0xc0800000, 4 * 1024 * 1024);
-}
-
-
 MACHINE_START(ANAKIN, "Anakin")
 	MAINTAINER("Wookey/Tak-Shing Chan")
 	BOOT_MEM(0x20000000, 0x40000000, 0xe0000000)
 	VIDEO(0x80000000, 0x8002db40)
-	FIXUP(fixup_anakin)
 	MAPIO(anakin_map_io)
 	INITIRQ(genarch_init_irq)
 MACHINE_END

arch/arm/mach-clps711x/cdb89712.c

@@ -44,12 +44,6 @@ static struct map_desc cdb89712_io_desc[] __initdata = {
 	LAST_DESC
 };
 
-static void __init
-fixup_cdb89712(struct machine_desc *desc, struct tag *tags,
-	    char **cmdline, struct meminfo *mi)
-{
-}
-
 static void __init cdb89712_map_io(void)
 {
 	clps711x_map_io();
@@ -60,7 +54,6 @@ MACHINE_START(CDB89712, "Cirrus-CDB89712")
 	MAINTAINER("Ray Lehtiniemi")
 	BOOT_MEM(0xc0000000, 0x80000000, 0xff000000)
 	BOOT_PARAMS(0xc0000100)
-	FIXUP(fixup_cdb89712)
 	MAPIO(cdb89712_map_io)
 	INITIRQ(clps711x_init_irq)
 MACHINE_END

arch/arm/mach-epxa10db/arch.c

@@ -33,29 +33,9 @@
 extern void epxa10db_map_io(void);
 extern void epxa10db_init_irq(void);
 
-
-static void __init
-epxa10db_fixup(struct machine_desc *desc, struct tag *tags,
-		 char **cmdline, struct meminfo *mi)
-{
-
-        mi->nr_banks      = 1;
-        mi->bank[0].start = 0;
-        mi->bank[0].size  = (32*1024*1024);
-        mi->bank[0].node  = 0;
-
-/*
-        ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
-        setup_ramdisk( 1, 0, 0, 8192 );
-        setup_initrd(0xc0200000, 6*1024*1024);
-*/
-}
-
 MACHINE_START(CAMELOT, "Altera Epxa10db")
 	MAINTAINER("Altera Corporation")
 	BOOT_MEM(0x00000000, 0x7fffc000, 0xffffc000)
-      	FIXUP(epxa10db_fixup)
 	MAPIO(epxa10db_map_io)
 	INITIRQ(epxa10db_init_irq)
-
 MACHINE_END

arch/arm/mach-integrator/arch.c

@@ -50,9 +50,7 @@ static struct kmi_info integrator_mouse __initdata = {
 };
 #endif
 
-static void __init
-integrator_fixup(struct machine_desc *desc, struct tag *tags,
-		 char **cmdline, struct meminfo *mi)
+static int __init integrator_init(void)
 {
 #ifdef CONFIG_KMI_KEYB
 	register_kmi(&integrator_keyboard);
@@ -60,11 +58,12 @@ integrator_fixup(struct machine_desc *desc, struct tag *tags,
 #endif
 }
 
+__initcall(integrator_init);
+
 MACHINE_START(INTEGRATOR, "ARM-Integrator")
 	MAINTAINER("ARM Ltd/Deep Blue Solutions Ltd")
 	BOOT_MEM(0x00000000, 0x16000000, 0xf1600000)
 	BOOT_PARAMS(0x00000100)
-	FIXUP(integrator_fixup)
 	MAPIO(integrator_map_io)
 	INITIRQ(integrator_init_irq)
 MACHINE_END

arch/arm/mach-iop310/arch.c

@@ -31,21 +31,8 @@ fixup_iq80310(struct machine_desc *desc, struct tag *tags,
 {
 	system_rev = (*(volatile unsigned int*)0xfe830000) & 0x0f;
 
-	if(system_rev)
+	if (system_rev)
 		system_rev = 0xF;
-
-	mi->bank[0].start = PHYS_OFFSET;
-	mi->bank[0].size  = (32*1024*1024);
-	mi->bank[0].node  = 0;
-	mi->nr_banks      = 1;
-
-#ifdef CONFIG_ROOT_NFS
-	ROOT_DEV = to_kdev_t(0x00FF);   /* /dev/nfs pseudo device */
-#elif defined(CONFIG_BLK_DEV_INITRD)
-	setup_ramdisk( 1, 0, 0, CONFIG_BLK_DEV_RAM_SIZE );
-	setup_initrd( 0xc0800000, 4*1024*1024 );
-	ROOT_DEV = mk_kdev(RAMDISK_MAJOR, 0); /* /dev/ram */
-#endif
 }
 
 MACHINE_START(IQ80310, "Cyclone IQ80310")

arch/arm/mach-l7200/core.c

@@ -82,33 +82,9 @@ static void __init l7200_map_io(void)
 	iotable_init(l7200_io_desc);
 }
 
-static void __init
-fixup_l7200(struct machine_desc *desc, struct tag *tags,
-             char **cmdline, struct meminfo *mi)
-{
-        mi->nr_banks      = 1;
-        mi->bank[0].start = PHYS_OFFSET;
-        mi->bank[0].size  = (32*1024*1024);
-        mi->bank[0].node  = 0;
-
-        ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
-        setup_ramdisk( 1, 0, 0, CONFIG_BLK_DEV_RAM_SIZE);
-        setup_initrd( __phys_to_virt(0xf1000000), 0x005dac7b);
-
-        /* Serial Console COM2 and LCD */
-	strcpy( *cmdline, "console=tty0 console=ttyLU1,115200");
-
-        /* Serial Console COM1 and LCD */
-	//strcpy( *cmdline, "console=tty0 console=ttyLU0,115200");
-
-        /* Console on LCD */
-	//strcpy( *cmdline, "console=tty0");
-}
-
 MACHINE_START(L7200, "LinkUp Systems L7200")
 	MAINTAINER("Steve Hill / Scott McConnell")
 	BOOT_MEM(0xf0000000, 0x80040000, 0xd0000000)
-	FIXUP(fixup_l7200)
 	MAPIO(l7200_map_io)
 	INITIRQ(l7200_init_irq)
 MACHINE_END

arch/arm/mach-pxa/idp.c

@@ -68,23 +68,6 @@ static void __init idp_init_irq(void)
 	pxa_init_irq();
 }
 
-static void __init
-fixup_idp(struct machine_desc *desc, struct tag *tags,
-		char **cmdline, struct meminfo *mi)
-{
-#ifdef PXA_IDP_REV02
-	SET_BANK (0, 0xa0000000, 64*1024*1024);
-#else
-	SET_BANK (0, 0xa0000000, 32*1024*1024);
-#endif
-	mi->nr_banks      = 1;
-#if 0
-	setup_ramdisk (1, 0, 0, 8192);
-	setup_initrd (__phys_to_virt(0xa1000000), 4*1024*1024);
-	ROOT_DEV = MKDEV(RAMDISK_MAJOR,0);
-#endif
-}
-
 static struct map_desc idp_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
 
@@ -132,7 +115,6 @@ static void __init idp_map_io(void)
 MACHINE_START(PXA_IDP, "Accelent Xscale IDP")
 	MAINTAINER("Accelent Systems Inc.")
 	BOOT_MEM(0xa0000000, 0x40000000, 0xfc000000)
-	FIXUP(fixup_idp)
 	MAPIO(idp_map_io)
 	INITIRQ(idp_init_irq)
 MACHINE_END

arch/arm/mach-pxa/lubbock.c

@@ -119,19 +119,6 @@ static int __init lubbock_init(void)
 
 __initcall(lubbock_init);
 
-static void __init
-fixup_lubbock(struct machine_desc *desc, struct tag *tags,
-		char **cmdline, struct meminfo *mi)
-{
-	SET_BANK (0, 0xa0000000, 64*1024*1024);
-	mi->nr_banks      = 1;
-#if 0
-	setup_ramdisk (1, 0, 0, 8192);
-	setup_initrd (__phys_to_virt(0xa1000000), 4*1024*1024);
-	ROOT_DEV = MKDEV(RAMDISK_MAJOR,0);
-#endif
-}
-
 static struct map_desc lubbock_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
   { 0xf0000000, 0x08000000, 0x00100000, DOMAIN_IO, 0, 1, 0, 0 }, /* CPLD */
@@ -160,7 +147,6 @@ static void __init lubbock_map_io(void)
 MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform")
 	MAINTAINER("MontaVista Software Inc.")
 	BOOT_MEM(0xa0000000, 0x40000000, 0xfc000000)
-	FIXUP(fixup_lubbock)
 	MAPIO(lubbock_map_io)
 	INITIRQ(lubbock_init_irq)
 MACHINE_END

arch/arm/mach-rpc/riscpc.c

@@ -60,16 +60,6 @@ __tagtable(ATAG_ACORN, parse_tag_acorn);
 
 #endif
 
-static void __init
-fixup_riscpc(struct machine_desc *desc, struct tag *tags,
-	    char **cmdline, struct meminfo *mi)
-{
-	/*
-	 * RiscPC can't handle half-word loads and stores
-	 */
-	elf_hwcap &= ~HWCAP_HALF;
-}
-
 static struct map_desc rpc_io_desc[] __initdata = {
  { SCREEN_BASE,	SCREEN_START,	2*1048576, DOMAIN_IO, 0, 1, 0, 0 }, /* VRAM		*/
  { IO_BASE,	IO_START,	IO_SIZE	 , DOMAIN_IO, 0, 1, 0, 0 }, /* IO space		*/
@@ -80,6 +70,11 @@ static struct map_desc rpc_io_desc[] __initdata = {
 void __init rpc_map_io(void)
 {
 	iotable_init(rpc_io_desc);
+
+	/*
+	 * RiscPC can't handle half-word loads and stores
+	 */
+	elf_hwcap &= ~HWCAP_HALF;
 }
 
 MACHINE_START(RISCPC, "Acorn-RiscPC")
@@ -88,7 +83,6 @@ MACHINE_START(RISCPC, "Acorn-RiscPC")
 	BOOT_PARAMS(0x10000100)
 	DISABLE_PARPORT(0)
 	DISABLE_PARPORT(1)
-	FIXUP(fixup_riscpc)
 	MAPIO(rpc_map_io)
 	INITIRQ(rpc_init_irq)
 MACHINE_END

arch/arm/mach-sa1100/adsbitsy.c

@@ -76,23 +76,6 @@ static void __init adsbitsy_init_irq(void)
 	sa1100_init_irq();
 }
 
-
-/*
- * Initialization fixup
- */
-
-static void __init
-fixup_adsbitsy(struct machine_desc *desc, struct tag *tags,
-		     char **cmdline, struct meminfo *mi)
-{
-	SET_BANK( 0, 0xc0000000, 32*1024*1024 );
-	mi->nr_banks = 1;
-
-	ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
-	setup_ramdisk( 1, 0, 0, 8192 );
-	setup_initrd( __phys_to_virt(0xc0800000), 4*1024*1024 );
-}
-
 static struct map_desc adsbitsy_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
   { 0xf4000000, 0x18000000, 0x00800000, DOMAIN_IO, 0, 1, 0, 0 }, /* SA1111 */
@@ -135,7 +118,6 @@ static void __init adsbitsy_map_io(void)
 
 MACHINE_START(ADSBITSY, "ADS Bitsy")
 	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
-	FIXUP(fixup_adsbitsy)
 	MAPIO(adsbitsy_map_io)
 	INITIRQ(adsbitsy_init_irq)
 MACHINE_END

arch/arm/mach-sa1100/assabet.c

@@ -162,60 +162,12 @@ static void __init
 fixup_assabet(struct machine_desc *desc, struct tag *tags,
 	      char **cmdline, struct meminfo *mi)
 {
-	struct tag *t = tags;
-
 	/* This must be done before any call to machine_has_neponset() */
 	map_sa1100_gpio_regs();
 	get_assabet_scr();
 
 	if (machine_has_neponset())
 		printk("Neponset expansion board detected\n");
-
-	if (t->hdr.tag != ATAG_CORE) {
-		t->hdr.tag = ATAG_CORE;
-		t->hdr.size = tag_size(tag_core);
-		t->u.core.flags = 0;
-		t->u.core.pagesize = PAGE_SIZE;
-		t->u.core.rootdev = RAMDISK_MAJOR << 8 | 0;
-		t = tag_next(t);
-
-		t->hdr.tag = ATAG_MEM;
-		t->hdr.size = tag_size(tag_mem32);
-		t->u.mem.start = 0xc0000000;
-		t->u.mem.size  = 32 * 1024 * 1024;
-		t = tag_next(t);
-
-
-		/*
-		 * Note that Neponset RAM is slower...
-		 * and still untested.
-		 * This would be a candidate for
-		 * _real_ NUMA support.
-		 */
-		if (machine_has_neponset() && 0) {
-			t->hdr.tag = ATAG_MEM;
-			t->hdr.size = tag_size(tag_mem32);
-			t->u.mem.start = 0xd0000000;
-			t->u.mem.size  = 32 * 1024 * 1024;
-			t = tag_next(t);
-		}
-
-		t->hdr.tag = ATAG_RAMDISK;
-		t->hdr.size = tag_size(tag_ramdisk);
-		t->u.ramdisk.flags = 1;
-		t->u.ramdisk.size = 8192;
-		t->u.ramdisk.start = 0;
-		t = tag_next(t);
-
-		t->hdr.tag = ATAG_INITRD;
-		t->hdr.size = tag_size(tag_initrd);
-		t->u.initrd.start = 0xc0800000;
-		t->u.initrd.size = 3 * 1024 * 1024;
-		t = tag_next(t);
-
-		t->hdr.tag = ATAG_NONE;
-		t->hdr.size = 0;
-	}
 }
 
 

arch/arm/mach-sa1100/brutus.c

@@ -21,22 +21,6 @@
 
 #include "generic.h"
 
-
-static void __init
-fixup_brutus(struct machine_desc *desc, struct tag *tags,
-	     char **cmdline, struct meminfo *mi)
-{
-	SET_BANK( 0, 0xc0000000, 4*1024*1024 );
-	SET_BANK( 1, 0xc8000000, 4*1024*1024 );
-	SET_BANK( 2, 0xd0000000, 4*1024*1024 );
-	SET_BANK( 3, 0xd8000000, 4*1024*1024 );
-	mi->nr_banks = 4;
-
-	ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
-	setup_ramdisk( 1, 0, 0, 8192 );
-	setup_initrd( __phys_to_virt(0xd8000000), 3*1024*1024 );
-}
-
 static void __init brutus_map_io(void)
 {
 	sa1100_map_io();
@@ -51,7 +35,6 @@ static void __init brutus_map_io(void)
 
 MACHINE_START(BRUTUS, "Intel Brutus (SA1100 eval board)")
 	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
-	FIXUP(fixup_brutus)
 	MAPIO(brutus_map_io)
 	INITIRQ(sa1100_init_irq)
 MACHINE_END

arch/arm/mach-sa1100/cerf.c

@@ -35,33 +35,6 @@ static void __init cerf_init_irq(void)
 	set_irq_type(IRQ_GPIO_UCB1200_IRQ, IRQT_RISING);
 }
 
-static void __init
-fixup_cerf(struct machine_desc *desc, struct tag *tags,
-	   char **cmdline, struct meminfo *mi)
-{
-#if defined(CONFIG_SA1100_CERF_64MB)
-	SET_BANK( 0, 0xc0000000, 64*1024*1024 );
-	mi->nr_banks = 1;
-#elif defined(CONFIG_SA1100_CERF_32MB)
-	SET_BANK( 0, 0xc0000000, 32*1024*1024 );
-	mi->nr_banks = 1;
-#elif defined(CONFIG_SA1100_CERF_16MB)
-	SET_BANK( 0, 0xc0000000, 8*1024*1024 );
-	SET_BANK( 1, 0xc8000000, 8*1024*1024 );
-	mi->nr_banks = 2;
-#elif defined(CONFIG_SA1100_CERF_8MB)
-	SET_BANK( 0, 0xc0000000, 8*1024*1024 );
-	mi->nr_banks = 1;
-#else
-#error "Undefined memory size for Cerfboard."
-#endif
-
-//	ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
-//	setup_ramdisk(1,  0, 0, 8192);
-//	// Save 2Meg for RAMDisk
-//	setup_initrd(0xc0500000, 3*1024*1024);
-}
-
 static struct map_desc cerf_io_desc[] __initdata = {
   /* virtual	 physical    length	 domain     r  w  c  b */
   { 0xf0000000, 0x08000000, 0x00100000, DOMAIN_IO, 0, 1, 0, 0 }, /* Crystal Ethernet Chip */
@@ -96,7 +69,6 @@ static void __init cerf_map_io(void)
 MACHINE_START(CERF, "Intrinsyc's Cerf Family of Products")
 	MAINTAINER("support@intrinsyc.com")
 	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
-	FIXUP(fixup_cerf)
 	MAPIO(cerf_map_io)
 	INITIRQ(cerf_init_irq)
 MACHINE_END

arch/arm/mach-sa1100/empeg.c

@@ -15,20 +15,6 @@
 
 #include "generic.h"
 
-
-static void __init
-fixup_empeg(struct machine_desc *desc, struct tag *tags,
-	    char **cmdline, struct meminfo *mi)
-{
-	SET_BANK( 0, 0xc0000000, 4*1024*1024 );
-	SET_BANK( 1, 0xc8000000, 4*1024*1024 );
-	mi->nr_banks = 2;
-
-	ROOT_DEV = mk_kdev( 3, 1 );  /* /dev/hda1 */
-	setup_ramdisk( 1, 0, 0, 4096 );
-	setup_initrd( 0xd0000000+((1024-320)*1024), (320*1024) );
-}
-
 static struct map_desc empeg_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
   { EMPEG_FLASHBASE, 0x00000000, 0x00200000, DOMAIN_IO, 0, 1, 0, 0 }, /* Flash */
@@ -48,7 +34,6 @@ static void __init empeg_map_io(void)
 
 MACHINE_START(EMPEG, "empeg MP3 Car Audio Player")
 	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
-	FIXUP(fixup_empeg)
 	MAPIO(empeg_map_io)
 	INITIRQ(sa1100_init_irq)
 MACHINE_END

arch/arm/mach-sa1100/flexanet.c

@@ -151,21 +151,6 @@ static int __init flexanet_init(void)
 __initcall(flexanet_init);
 
 
-static void __init
-fixup_flexanet(struct machine_desc *desc, struct tag *tags,
-	      char **cmdline, struct meminfo *mi)
-{
-	/* fixed RAM size, by now (64MB) */
-	SET_BANK( 0, 0xc0000000, 64*1024*1024 );
-	mi->nr_banks = 1;
-
-	/* setup ramdisk */
-	ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
-	setup_ramdisk( 1, 0, 0, 8192 );
-	setup_initrd( 0xc0800000, 3*1024*1024 );
-}
-
-
 static struct map_desc flexanet_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
   { 0xf0000000, 0x10000000, 0x00001000, DOMAIN_IO, 0, 1, 0, 0 }, /* Board Control Register */
@@ -206,7 +191,6 @@ static void __init flexanet_map_io(void)
 MACHINE_START(FLEXANET, "FlexaNet")
 	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
 	BOOT_PARAMS(0xc0000100)
-	FIXUP(fixup_flexanet)
 	MAPIO(flexanet_map_io)
 	INITIRQ(sa1100_init_irq)
 MACHINE_END

arch/arm/mach-sa1100/freebird.c

@@ -51,19 +51,6 @@ static int __init freebird_init(void)
 
 __initcall(freebird_init);
 
-static void __init
-fixup_freebird(struct machine_desc *desc, struct tag *tags,
-	       char **cmdline, struct meminfo *mi)
-{
-#ifdef CONFIG_SA1100_FREEBIRD_OLD
-	SET_BANK( 0, 0xc0000000, 32*1024*1024 );
-	mi->nr_banks = 1;
-	ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
-	setup_ramdisk( 1, 0 ,0 , 8192 );
-	setup_initrd( 0xc0800000, 3*1024*1024 );
-#endif
-}
-
 static struct map_desc freebird_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
   { 0xf0000000, 0x12000000, 0x00100000, DOMAIN_IO, 0, 1, 0, 0 }, /* Board Control Register */
@@ -90,7 +77,6 @@ MACHINE_START(FREEBIRD, "Freebird-HPC-1.1")
 #ifdef CONFIG_SA1100_FREEBIRD_NEW
 	BOOT_PARAMS(0xc0000100)
 #endif
-	FIXUP(fixup_freebird)
 	MAPIO(freebird_map_io)
 	INITIRQ(sa1100_init_irq)
 MACHINE_END

arch/arm/mach-sa1100/graphicsclient.c

@@ -120,23 +120,6 @@ static void __init graphicsclient_init_irq(void)
 }
 
 
-/*
- * Initialization fixup
- */
-
-static void __init
-fixup_graphicsclient(struct machine_desc *desc, struct tag *tags,
-		     char **cmdline, struct meminfo *mi)
-{
-	SET_BANK( 0, 0xc0000000, 16*1024*1024 );
-	SET_BANK( 1, 0xc8000000, 16*1024*1024 );
-	mi->nr_banks = 2;
-
-	ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
-	setup_ramdisk( 1, 0, 0, 8192 );
-	setup_initrd( __phys_to_virt(0xc0800000), 4*1024*1024 );
-}
-
 static struct map_desc graphicsclient_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
   { 0xf0000000, 0x10000000, 0x00400000, DOMAIN_IO, 0, 1, 0, 0 }, /* CPLD */
@@ -216,7 +199,6 @@ static void __init graphicsclient_map_io(void)
 
 MACHINE_START(GRAPHICSCLIENT, "ADS GraphicsClient")
 	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
-	FIXUP(fixup_graphicsclient)
 	MAPIO(graphicsclient_map_io)
 	INITIRQ(graphicsclient_init_irq)
 MACHINE_END

arch/arm/mach-sa1100/graphicsmaster.c

@@ -152,24 +152,6 @@ static void __init graphicsmaster_init_irq(void)
 }
 
 
-/*
- * Initialization fixup
- */
-
-static void __init
-fixup_graphicsmaster(struct machine_desc *desc, struct tag *tags,
-		     char **cmdline, struct meminfo *mi)
-{
-	SET_BANK( 0, 0xc0000000, 16*1024*1024 );
-	mi->nr_banks = 1;
-	SET_BANK( 1, 0xc8000000, 16*1024*1024 );
-	mi->nr_banks = 2;
-
-	ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
-	setup_ramdisk( 1, 0, 0, 8192 );
-	setup_initrd( __phys_to_virt(0xc0800000), 4*1024*1024 );
-}
-
 static struct map_desc graphicsmaster_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
   { 0xf0000000, 0x10000000, 0x00400000, DOMAIN_IO, 0, 1, 0, 0 }, /* CPLD */
@@ -276,7 +258,6 @@ static void __init graphicsmaster_map_io(void)
 
 MACHINE_START(GRAPHICSMASTER, "ADS GraphicsMaster")
 	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
-	FIXUP(fixup_graphicsmaster)
 	MAPIO(graphicsmaster_map_io)
 	INITIRQ(graphicsmaster_init_irq)
 MACHINE_END

arch/arm/mach-sa1100/huw_webpanel.c

@@ -54,22 +54,6 @@ static int __init init_huw_cs3(void)
 __initcall(init_huw_cs3);
 
 
-static void __init
-fixup_huw_webpanel(struct machine_desc *desc, struct tag *tags,
-		   char **cmdline, struct meminfo *mi)
-{
-	/**
-	  memory information (JOR):
-	  32 MByte - 256KByte bootloader (init at boot time) - 32 kByte save area
-	 **/
-	SET_BANK( 0, 0xc0000000, ((32*1024 - (256 + 32)) * 1024));
-	mi->nr_banks = 1;
-	ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
-	setup_ramdisk( 1, 0, 0, 8192 );
-	setup_initrd( __phys_to_virt(0xc0800000), 8*1024*1024 );
-}
-
-
 /**
    memory information (JOR):
    32 MByte - 256KByte bootloader (init at boot time) - 32 kByte save area
@@ -95,7 +79,6 @@ static void __init huw_webpanel_map_io(void)
 MACHINE_START(HUW_WEBPANEL, "HuW-Webpanel")
 	MAINTAINER("Roman Jordan")
 	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
-	FIXUP(fixup_huw_webpanel)
 	MAPIO(huw_webpanel_map_io)
 	INITIRQ(sa1100_init_irq)
 MACHINE_END

arch/arm/mach-sa1100/itsy.c

@@ -15,18 +15,6 @@
 
 #include "generic.h"
 
-
-static void __init
-fixup_itsy(struct machine_desc *desc, struct tag *tags,
-	   char **cmdline, struct meminfo *mi)
-{
-	SET_BANK( 0, 0xc0000000, 16*1024*1024 );
-	SET_BANK( 1, 0xc8000000, 16*1024*1024 );
-	SET_BANK( 2, 0xd0000000, 16*1024*1024 );
-	SET_BANK( 3, 0xd8000000, 16*1024*1024 );
-	mi->nr_banks = 4;
-}
-
 /* BRADFIXME The egpio addresses aren't verifiably correct. (i.e. they're most
    likely wrong. */
 static struct map_desc itsy_io_desc[] __initdata = {
@@ -49,7 +37,6 @@ static void __init itsy_map_io(void)
 MACHINE_START(ITSY, "Compaq Itsy")
 	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
 	BOOT_PARAMS(0xc0000100)
-	FIXUP(fixup_itsy)
 	MAPIO(itsy_map_io)
 	INITIRQ(sa1100_init_irq)
 MACHINE_END

arch/arm/mach-sa1100/jornada720.c

@@ -55,15 +55,6 @@ static int __init jornada720_init(void)
 
 __initcall(jornada720_init);
 
-
-static void __init
-fixup_jornada720(struct machine_desc *desc, struct tag *tags,
-		 char **cmdline, struct meminfo *mi)
-{
-	SET_BANK( 0, 0xc0000000, 32*1024*1024 );
-	mi->nr_banks = 1;
-}
-
 static struct map_desc jornada720_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
   { 0xf0000000, 0x48000000, 0x00100000, DOMAIN_IO, 0, 1, 0, 0 }, /* Epson registers */
@@ -84,7 +75,6 @@ static void __init jornada720_map_io(void)
 MACHINE_START(JORNADA720, "HP Jornada 720")
 	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
 	BOOT_PARAMS(0xc0000100)
-	FIXUP(fixup_jornada720)
 	MAPIO(jornada720_map_io)
 	INITIRQ(sa1100_init_irq)
 MACHINE_END

arch/arm/mach-sa1100/nanoengine.c

@@ -15,20 +15,12 @@
 
 #include "generic.h"
 
-
 static void __init
 fixup_nanoengine(struct machine_desc *desc, struct tag *tags,
 		 char **cmdline, struct meminfo *mi)
 {
-	SET_BANK( 0, 0xc0000000, 32*1024*1024 );
-	mi->nr_banks = 1;
-
-	ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
-	setup_ramdisk( 1, 0, 0, 8192 );
-	setup_initrd( __phys_to_virt(0xc0800000), 4*1024*1024 );
-
 	/* Get command line parameters passed from the loader (if any) */
-	if( *((char*)0xc0000100) )
+	if (*((char*)0xc0000100))
 		*cmdline = ((char *)0xc0000100);
 }
 

arch/arm/mach-sa1100/omnimeter.c

@@ -40,18 +40,6 @@ static int __init omnimeter_init(void)
 
 __initcall(omnimeter_init);
 
-static void __init
-fixup_omnimeter(struct machine_desc *desc, struct tag *tags,
-		char **cmdline, struct meminfo *mi)
-{
-	SET_BANK( 0, 0xc0000000, 16*1024*1024 );
-	mi->nr_banks = 1;
-
-	ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
-	setup_ramdisk( 1, 0, 0, 8192 );
-	setup_initrd( __phys_to_virt(0xd0000000), 0x00400000 );
-}
-
 static struct map_desc omnimeter_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
   { 0xd2000000, 0x10000000, 0x02000000, DOMAIN_IO, 0, 1, 0, 0 }, /* TS */
@@ -69,7 +57,6 @@ static void __init omnimeter_map_io(void)
 
 MACHINE_START(OMNIMETER, "OmniMeter")
 	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
-	FIXUP(fixup_omnimeter)
 	MAPIO(omnimeter_map_io)
 	INITIRQ(sa1100_init_irq)
 MACHINE_END

arch/arm/mach-sa1100/pangolin.c

@@ -15,19 +15,6 @@
 
 #include "generic.h"
 
-
-static void __init
-fixup_pangolin(struct machine_desc *desc, struct tag *tags,
-	       char **cmdline, struct meminfo *mi)
-{
-	SET_BANK( 0, 0xc0000000, 128*1024*1024 );
-	mi->nr_banks = 1;
-
-	ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
-	setup_ramdisk( 1, 0, 0, 16384 );
-	setup_initrd( 0xc0800000, 3*1024*1024 );
-}
-
 static struct map_desc pangolin_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
   { 0xf2800000, 0x4b800000, 0x00800000, DOMAIN_IO, 0, 1, 0, 0 }, /* MQ200 */
@@ -52,7 +39,6 @@ static void __init pangolin_map_io(void)
 
 MACHINE_START(PANGOLIN, "Dialogue-Pangolin")
 	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
-	FIXUP(fixup_pangolin)
 	MAPIO(pangolin_map_io)
 	INITIRQ(sa1100_init_irq)
 MACHINE_END

arch/arm/mach-sa1100/pfs168.c

@@ -55,19 +55,6 @@ static void __init pfs168_init_irq(void)
 	set_GPIO_IRQ_edge(GPIO_UCB1300_IRQ, GPIO_RISING_EDGE);
 }
 
-
-static void __init
-fixup_pfs168(struct machine_desc *desc, struct tag *tags,
-	     char **cmdline, struct meminfo *mi)
-{
-	SET_BANK( 0, 0xc0000000, 16*1024*1024 );
-	mi->nr_banks = 1;
-
-	ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
-	setup_ramdisk( 1, 0, 0, 8192 );
-	setup_initrd( 0xc0800000, 3*1024*1024 );
-}
-
 static struct map_desc pfs168_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
   { 0xe8000000, 0x00000000, 0x02000000, DOMAIN_IO, 0, 1, 0, 0 }, /* Flash bank 0 */
@@ -98,10 +85,7 @@ static void __init pfs168_map_io(void)
 
 MACHINE_START(PFS168, "Tulsa")
 	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
-#if defined(CONFIG_PFS168_CMDLINE)
 	BOOT_PARAMS(0xc0000100)
-#endif
-	FIXUP(fixup_pfs168)
 	MAPIO(pfs168_map_io)
 	INITIRQ(pfs168_init_irq)
 MACHINE_END

arch/arm/mach-sa1100/pleb.c

@@ -15,24 +15,6 @@
 
 #include "generic.h"
 
-static void __init
-fixup_pleb(struct machine_desc *desc, struct tag *tags,
-           char **cmdline, struct meminfo *mi)
-{
-	SET_BANK(0, 0xc0000000, 16*1024*1024);
-	SET_BANK(1, 0xc8000000, 16*1024*1024);
-	SET_BANK(2, 0xd0000000, 16*1024*1024);
-	SET_BANK(3, 0xd8000000, 16*1024*1024);
-
-	/* make this 4 a second memory card is used to make 64MB */
-	/* make it 1 if a 16MB memory card is used */
-	mi->nr_banks = 2; /* Default 32MB */
-
-	ROOT_DEV = mk_kdev(RAMDISK_MAJOR, 0);
-	setup_ramdisk(1, 0, 0, 8192);
-	setup_initrd(0xc0400000, 4*1024*1024);
-}
-
 static struct map_desc pleb_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
   { 0xe8000000, 0x00000000, 0x00400000, DOMAIN_IO, 0, 1, 0, 0 }, /* main flash memory */
@@ -55,7 +37,6 @@ static void __init pleb_map_io(void)
 
 MACHINE_START(PLEB, "PLEB")
 	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
-	FIXUP(fixup_pleb)
 	MAPIO(pleb_map_io)
 	INITIRQ(sa1100_init_irq)
 MACHINE_END

arch/arm/mach-sa1100/sherman.c

@@ -15,20 +15,6 @@
 
 #include "generic.h"
 
-
-static void __init
-fixup_sherman(struct machine_desc *desc, struct tag *tags,
-	      char **cmdline, struct meminfo *mi)
-{
-	SET_BANK( 0, 0xc0000000, 64*1024*1024 );
-	SET_BANK( 1, 0xc8000000, 64*1024*1024 );
-	mi->nr_banks = 2;
-
-	ROOT_DEV = mk_kdev( 60, 2 );
-	setup_ramdisk( 1, 0, 0, 8192 );
-//	setup_initrd( 0xc0400000, 8*1024*1024 );
-}
-
 static void __init sherman_map_io(void)
 {
 	sa1100_map_io();
@@ -39,7 +25,6 @@ static void __init sherman_map_io(void)
 
 MACHINE_START(SHERMAN, "Blazie Engineering Sherman")
         BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
-        FIXUP(fixup_sherman)
         MAPIO(sherman_map_io)
 	INITIRQ(sa1100_init_irq)
 MACHINE_END

arch/arm/mach-sa1100/simpad.c

@@ -40,22 +40,6 @@ void clear_cs3_bit(int value)
 	*(CS3BUSTYPE *)(CS3_BASE) = cs3_shadow;
 }
 
-static void __init
-fixup_simpad(struct machine_desc *desc, struct tag *tags,
-		   char **cmdline, struct meminfo *mi)
-{
-#ifdef CONFIG_SA1100_SIMPAD_DRAM_64MB /* DRAM */
-	SET_BANK( 0, 0xc0000000, 64*1024*1024 );
-#else
-	SET_BANK( 0, 0xc0000000, 32*1024*1024 );
-#endif
-	mi->nr_banks = 1;
-	ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
-	setup_ramdisk( 1, 0, 0, 8192 );
-	setup_initrd( __phys_to_virt(0xc0800000), 4*1024*1024 );
-}
-
-
 static struct map_desc simpad_io_desc[] __initdata = {
   /* virtual	physical    length	domain	   r  w  c  b */
   { 0xf2800000, 0x4b800000, 0x00800000, DOMAIN_IO, 0, 1, 0, 0 }, /* MQ200 */  
@@ -141,22 +125,14 @@ static int proc_cs3_read(char *page, char **start, off_t off,
 }
  
  
-static struct proc_dir_entry *proc_cs3;
- 
 static int __init cs3_init(void)
 {
-	proc_cs3 = create_proc_entry("cs3", 0, 0);
+	struct proc_dir_entry *proc_cs3 = create_proc_entry("cs3", 0, 0);
 	if (proc_cs3)
 		proc_cs3->read_proc = proc_cs3_read;
 	return 0;
 }
  
-static int __exit cs3_exit(void)
-{
-	if (proc_cs3)
-		remove_proc_entry( "cs3", 0);
-	return 0;
-}		   
 __initcall(cs3_init);
 
 #endif // CONFIG_PROC_FS
@@ -164,7 +140,6 @@ __initcall(cs3_init);
 MACHINE_START(SIMPAD, "Simpad")
 	MAINTAINER("Juergen Messerer")
 	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
-	FIXUP(fixup_simpad)
 	MAPIO(simpad_map_io)
 	INITIRQ(sa1100_init_irq)
 MACHINE_END

arch/arm/mach-sa1100/system3.c

@@ -73,8 +73,6 @@
  */
 
 /* init funcs */
-static void __init fixup_system3(struct machine_desc *desc,
-		struct tag *tags, char **cmdline, struct meminfo *mi);
 static int __init system3_init(void);
 static void __init system3_init_irq(void);
 static void __init system3_map_io(void);
@@ -228,25 +226,6 @@ static int sdram_notifier(struct notifier_block *nb, unsigned long event,
 	return 0;
 }
 
-/**
- *	fixup_system3 - fixup function for system 3 board
- *	@desc:		machine description
- *	@param:		kernel params
- *	@cmdline:	kernel cmdline
- *	@mi:		memory info struct
- *
- */
-static void __init fixup_system3(struct machine_desc *desc,
-		struct tag *tags, char **cmdline, struct meminfo *mi)
-{
-	DPRINTK( "%s\n", "START" );
-
-	ROOT_DEV = mk_kdev(RAMDISK_MAJOR,0);
-	setup_ramdisk( 1, 0, 0, 8192 );
-	setup_initrd( 0xc0800000, 8*1024*1024 );
-}
-
-
 /**
  *	system3_uart_pm - powermgmt callback function for system 3 UART
  *	@port: uart port structure
@@ -457,7 +436,6 @@ __initcall(system3_init);
 MACHINE_START(PT_SYSTEM3, "PT System 3")
 	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
 	BOOT_PARAMS(0xc0000100)
-	FIXUP(fixup_system3)
 	MAPIO(system3_map_io)
 	INITIRQ(sa1100_init_irq)
 MACHINE_END

arch/arm/mach-sa1100/xp860.c

@@ -56,15 +56,6 @@ static int __init xp860_init(void)
 
 __initcall(xp860_init);
 
-
-static void __init
-fixup_xp860(struct machine_desc *desc, struct tag *tags,
-	    char **cmdline, struct meminfo *mi)
-{
-	SET_BANK( 0, 0xc0000000, 32*1024*1024 );
-	mi->nr_banks = 1;
-}
-
 static struct map_desc xp860_io_desc[] __initdata = {
  /* virtual     physical    length      domain     r  w  c  b */
   { 0xf0000000, 0x10000000, 0x00100000, DOMAIN_IO, 0, 1, 0, 0 }, /* SCSI */
@@ -84,7 +75,6 @@ static void __init xp860_map_io(void)
 
 MACHINE_START(XP860, "XP860")
 	BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
-	FIXUP(fixup_xp860)
 	MAPIO(xp860_map_io)
 	INITIRQ(sa1100_init_irq)
 MACHINE_END

include/asm-arm/mach/arch.h

@@ -16,9 +16,6 @@
 
 #ifndef __ASSEMBLY__
 
-extern void setup_initrd(unsigned int start, unsigned int size);
-extern void setup_ramdisk(int doload, int prompt, int start, unsigned int rd_sz);
-
 struct tag;
 
 struct machine_desc {