[SPARC]: Bring ESP driver in line with modern EH handling.

drivers/scsi/esp.c

@@ -1041,6 +1041,8 @@ static void __init esp_init_swstate(struct esp *esp)
 	esp->resetting_bus = 0;
 	esp->snip = 0;
 
+	init_waitqueue_head(&esp->reset_queue);
+
 	/* Debugging... */
 	for(i = 0; i < 32; i++)
 		esp->espcmdlog[i] = 0;
@@ -2045,6 +2047,7 @@ static int esp_finish_reset(struct esp *esp)
 
 	/* SCSI bus reset is complete. */
 	esp->resetting_bus = 0;
+	wake_up(&esp->reset_queue);
 
 	/* Ok, now it is safe to get commands going once more. */
 	if (esp->issue_SC)
@@ -2065,7 +2068,7 @@ static int esp_do_resetbus(struct esp *esp)
 /* Reset ESP chip, reset hanging bus, then kill active and
  * disconnected commands for targets without soft reset.
  */
-int esp_reset(Scsi_Cmnd *SCptr, unsigned int how)
+int esp_reset(Scsi_Cmnd *SCptr)
 {
 	struct esp *esp = (struct esp *) SCptr->host->hostdata;
 	unsigned long flags;
@@ -2074,7 +2077,9 @@ int esp_reset(Scsi_Cmnd *SCptr, unsigned int how)
 	(void) esp_do_resetbus(esp);
 	spin_unlock_irqrestore(esp->ehost->host_lock, flags);
 
-	return SCSI_RESET_PENDING;
+	wait_event(esp->reset_queue, (esp->resetting_bus == 0));
+
+	return SUCCESS;
 }
 
 /* Internal ESP done function. */

drivers/scsi/esp.h

@@ -196,6 +196,7 @@ struct esp {
 	 * cannot be assosciated with any specific command.
 	 */
 	u8			resetting_bus;
+	wait_queue_head_t	reset_queue;
 };
 
 /* Bitfield meanings for the above registers. */
@@ -407,50 +408,36 @@ extern const char *esp_info(struct Scsi_Host *);
 extern int esp_queue(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
 extern int esp_command(Scsi_Cmnd *);
 extern int esp_abort(Scsi_Cmnd *);
-extern int esp_reset(Scsi_Cmnd *, unsigned int);
+extern int esp_reset(Scsi_Cmnd *);
 extern int esp_proc_info(char *buffer, char **start, off_t offset, int length,
 			 int hostno, int inout);
 extern void esp_slave_detach(Scsi_Device* SDptr);
 
 #ifdef CONFIG_SPARC64
-#define SCSI_SPARC_ESP {                                        \
-		proc_name:      "esp",				\
-		proc_info:      &esp_proc_info,			\
-		name:           "Sun ESP 100/100a/200",		\
-		detect:         esp_detect,			\
-		slave_detach:	esp_slave_detach,		\
-		info:           esp_info,			\
-		command:        esp_command,			\
-		queuecommand:   esp_queue,			\
-		abort:          esp_abort,			\
-		reset:          esp_reset,			\
-		can_queue:      7,				\
-		this_id:        7,				\
-		sg_tablesize:   SG_ALL,				\
-		cmd_per_lun:    1,				\
-		use_clustering: ENABLE_CLUSTERING,		\
-		highmem_io:	1,				\
-}
+#define ESP_HIGHMEM_IO	1
 #else
 /* Sparc32's iommu code cannot handle highmem pages yet. */
+#define ESP_HIGHMEM_IO	0
+#endif
+
 #define SCSI_SPARC_ESP {					\
-		proc_name:      "esp",				\
-		proc_info:      &esp_proc_info,			\
-		name:           "Sun ESP 100/100a/200",		\
-		detect:         esp_detect,			\
-		slave_detach:	esp_slave_detach,		\
-		info:           esp_info,			\
-		command:        esp_command,			\
-		queuecommand:   esp_queue,			\
-		abort:          esp_abort,			\
-		reset:          esp_reset,			\
-		can_queue:      7,				\
-		this_id:        7,				\
-		sg_tablesize:   SG_ALL,				\
-		cmd_per_lun:    1,				\
-		use_clustering: ENABLE_CLUSTERING,		\
+		.proc_name	=	"esp",			\
+		.proc_info	=	&esp_proc_info,		\
+		.name		=	"Sun ESP 100/100a/200",	\
+		.detect		=	esp_detect,		\
+		.slave_detach	=	esp_slave_detach,	\
+		.info		=	esp_info,		\
+		.command	=	esp_command,		\
+		.queuecommand	=	esp_queue,		\
+		.eh_abort_handler =	esp_abort,		\
+		.eh_bus_reset_handler =	esp_reset,		\
+		.can_queue	=	7,			\
+		.this_id	=	7,			\
+		.sg_tablesize	=	SG_ALL,			\
+		.cmd_per_lun	=	1,			\
+		.use_clustering	=	ENABLE_CLUSTERING,	\
+		.highmem_io	=	ESP_HIGHMEM_IO,		\
 }
-#endif
 
 /* For our interrupt engine. */
 #define for_each_esp(esp) \