Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq fixes from Thomas Gleixner:
 "Three fixes for irq core and irq chip drivers:

   - Do not set the irq type if type is NONE.  Fixes a boot regression
     on various SoCs

   - Use the proper cpu for setting up the GIC target list.  Discovered
     by the cpumask debugging code.

   - A rather large fix for the MIPS-GIC so per cpu local interrupts
     work again.  This was discovered late because the code falls back
     to slower timers which use normal device interrupts"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/mips-gic: Fix local interrupts
  irqchip/gicv3: Silence noisy DEBUG_PER_CPU_MAPS warning
  genirq: Skip chained interrupt trigger setup if type is IRQ_TYPE_NONE

drivers/irqchip/irq-gic-v3.c

@@ -548,7 +548,7 @@ static int gic_starting_cpu(unsigned int cpu)
 static u16 gic_compute_target_list(int *base_cpu, const struct cpumask *mask,
 				   unsigned long cluster_id)
 {
-	int cpu = *base_cpu;
+	int next_cpu, cpu = *base_cpu;
 	unsigned long mpidr = cpu_logical_map(cpu);
 	u16 tlist = 0;
 
@@ -562,9 +562,10 @@ static u16 gic_compute_target_list(int *base_cpu, const struct cpumask *mask,
 
 		tlist |= 1 << (mpidr & 0xf);
 
-		cpu = cpumask_next(cpu, mask);
-		if (cpu >= nr_cpu_ids)
+		next_cpu = cpumask_next(cpu, mask);
+		if (next_cpu >= nr_cpu_ids)
 			goto out;
+		cpu = next_cpu;
 
 		mpidr = cpu_logical_map(cpu);
 

drivers/irqchip/irq-mips-gic.c

@@ -638,27 +638,6 @@ static int gic_local_irq_domain_map(struct irq_domain *d, unsigned int virq,
 	if (!gic_local_irq_is_routable(intr))
 		return -EPERM;
 
-	/*
-	 * HACK: These are all really percpu interrupts, but the rest
-	 * of the MIPS kernel code does not use the percpu IRQ API for
-	 * the CP0 timer and performance counter interrupts.
-	 */
-	switch (intr) {
-	case GIC_LOCAL_INT_TIMER:
-	case GIC_LOCAL_INT_PERFCTR:
-	case GIC_LOCAL_INT_FDC:
-		irq_set_chip_and_handler(virq,
-					 &gic_all_vpes_local_irq_controller,
-					 handle_percpu_irq);
-		break;
-	default:
-		irq_set_chip_and_handler(virq,
-					 &gic_local_irq_controller,
-					 handle_percpu_devid_irq);
-		irq_set_percpu_devid(virq);
-		break;
-	}
-
 	spin_lock_irqsave(&gic_lock, flags);
 	for (i = 0; i < gic_vpes; i++) {
 		u32 val = GIC_MAP_TO_PIN_MSK | gic_cpu_pin;
@@ -724,16 +703,42 @@ static int gic_shared_irq_domain_map(struct irq_domain *d, unsigned int virq,
 	return 0;
 }
 
-static int gic_irq_domain_map(struct irq_domain *d, unsigned int virq,
-			      irq_hw_number_t hw)
+static int gic_setup_dev_chip(struct irq_domain *d, unsigned int virq,
+			      unsigned int hwirq)
 {
-	if (GIC_HWIRQ_TO_LOCAL(hw) < GIC_NUM_LOCAL_INTRS)
-		return gic_local_irq_domain_map(d, virq, hw);
+	struct irq_chip *chip;
+	int err;
+
+	if (hwirq >= GIC_SHARED_HWIRQ_BASE) {
+		err = irq_domain_set_hwirq_and_chip(d, virq, hwirq,
+						    &gic_level_irq_controller,
+						    NULL);
+	} else {
+		switch (GIC_HWIRQ_TO_LOCAL(hwirq)) {
+		case GIC_LOCAL_INT_TIMER:
+		case GIC_LOCAL_INT_PERFCTR:
+		case GIC_LOCAL_INT_FDC:
+			/*
+			 * HACK: These are all really percpu interrupts, but
+			 * the rest of the MIPS kernel code does not use the
+			 * percpu IRQ API for them.
+			 */
+			chip = &gic_all_vpes_local_irq_controller;
+			irq_set_handler(virq, handle_percpu_irq);
+			break;
 
-	irq_set_chip_and_handler(virq, &gic_level_irq_controller,
-				 handle_level_irq);
+		default:
+			chip = &gic_local_irq_controller;
+			irq_set_handler(virq, handle_percpu_devid_irq);
+			irq_set_percpu_devid(virq);
+			break;
+		}
 
-	return gic_shared_irq_domain_map(d, virq, hw, 0);
+		err = irq_domain_set_hwirq_and_chip(d, virq, hwirq,
+						    chip, NULL);
+	}
+
+	return err;
 }
 
 static int gic_irq_domain_alloc(struct irq_domain *d, unsigned int virq,
@@ -744,15 +749,12 @@ static int gic_irq_domain_alloc(struct irq_domain *d, unsigned int virq,
 	int cpu, ret, i;
 
 	if (spec->type == GIC_DEVICE) {
-		/* verify that it doesn't conflict with an IPI irq */
-		if (test_bit(spec->hwirq, ipi_resrv))
+		/* verify that shared irqs don't conflict with an IPI irq */
+		if ((spec->hwirq >= GIC_SHARED_HWIRQ_BASE) &&
+		    test_bit(GIC_HWIRQ_TO_SHARED(spec->hwirq), ipi_resrv))
 			return -EBUSY;
 
-		hwirq = GIC_SHARED_TO_HWIRQ(spec->hwirq);
-
-		return irq_domain_set_hwirq_and_chip(d, virq, hwirq,
-						     &gic_level_irq_controller,
-						     NULL);
+		return gic_setup_dev_chip(d, virq, spec->hwirq);
 	} else {
 		base_hwirq = find_first_bit(ipi_resrv, gic_shared_intrs);
 		if (base_hwirq == gic_shared_intrs) {
@@ -821,7 +823,6 @@ int gic_irq_domain_match(struct irq_domain *d, struct device_node *node,
 }
 
 static const struct irq_domain_ops gic_irq_domain_ops = {
-	.map = gic_irq_domain_map,
 	.alloc = gic_irq_domain_alloc,
 	.free = gic_irq_domain_free,
 	.match = gic_irq_domain_match,
@@ -852,29 +853,20 @@ static int gic_dev_domain_alloc(struct irq_domain *d, unsigned int virq,
 	struct irq_fwspec *fwspec = arg;
 	struct gic_irq_spec spec = {
 		.type = GIC_DEVICE,
-		.hwirq = fwspec->param[1],
 	};
 	int i, ret;
-	bool is_shared = fwspec->param[0] == GIC_SHARED;
 
-	if (is_shared) {
+	if (fwspec->param[0] == GIC_SHARED)
+		spec.hwirq = GIC_SHARED_TO_HWIRQ(fwspec->param[1]);
+	else
+		spec.hwirq = GIC_LOCAL_TO_HWIRQ(fwspec->param[1]);
+
 	ret = irq_domain_alloc_irqs_parent(d, virq, nr_irqs, &spec);
 	if (ret)
 		return ret;
-	}
 
 	for (i = 0; i < nr_irqs; i++) {
-		irq_hw_number_t hwirq;
-
-		if (is_shared)
-			hwirq = GIC_SHARED_TO_HWIRQ(spec.hwirq + i);
-		else
-			hwirq = GIC_LOCAL_TO_HWIRQ(spec.hwirq + i);
-
-		ret = irq_domain_set_hwirq_and_chip(d, virq + i,
-						    hwirq,
-						    &gic_level_irq_controller,
-						    NULL);
+		ret = gic_setup_dev_chip(d, virq + i, spec.hwirq + i);
 		if (ret)
 			goto error;
 	}
@@ -896,6 +888,9 @@ void gic_dev_domain_free(struct irq_domain *d, unsigned int virq,
 static void gic_dev_domain_activate(struct irq_domain *domain,
 				    struct irq_data *d)
 {
+	if (GIC_HWIRQ_TO_LOCAL(d->hwirq) < GIC_NUM_LOCAL_INTRS)
+		gic_local_irq_domain_map(domain, d->irq, d->hwirq);
+	else
 		gic_shared_irq_domain_map(domain, d->irq, d->hwirq, 0);
 }
 

kernel/irq/chip.c

@@ -820,6 +820,8 @@ __irq_do_set_handler(struct irq_desc *desc, irq_flow_handler_t handle,
 	desc->name = name;
 
 	if (handle != handle_bad_irq && is_chained) {
+		unsigned int type = irqd_get_trigger_type(&desc->irq_data);
+
 		/*
 		 * We're about to start this interrupt immediately,
 		 * hence the need to set the trigger configuration.
@@ -828,8 +830,10 @@ __irq_do_set_handler(struct irq_desc *desc, irq_flow_handler_t handle,
 		 * chained interrupt. Reset it immediately because we
 		 * do know better.
 		 */
-		__irq_set_trigger(desc, irqd_get_trigger_type(&desc->irq_data));
+		if (type != IRQ_TYPE_NONE) {
+			__irq_set_trigger(desc, type);
 			desc->handle_irq = handle;
+		}
 
 		irq_settings_set_noprobe(desc);
 		irq_settings_set_norequest(desc);